From owner-freebsd-mobile Sun Apr 25 9:52:35 1999 Delivered-To: freebsd-mobile@freebsd.org Received: from rip.psg.com (rip.psg.com [147.28.0.39]) by hub.freebsd.org (Postfix) with ESMTP id 11DC715546 for ; Sun, 25 Apr 1999 09:52:12 -0700 (PDT) (envelope-from randy@psg.com) Received: from localhost (11436 bytes) by rip.psg.com via sendmail with P:stdio/R:inet_resolve/T:smtp (sender: ) (ident using unix) id for ; Sun, 25 Apr 1999 09:52:12 -0700 (PDT) (Smail-3.2.0.101 1997-Dec-17 #1 built 1999-Apr-1) Message-Id: Date: Sun, 25 Apr 1999 09:52:12 -0700 (PDT) From: Randy Bush MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: FreeBSD Laptoppers Subject: vaio 505tx 3.1-pao hangs after suspend Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org sony vaio 505tx 3.1-release + pao3 if i type 'zzz' it responds with a single beep and the screen goes blank as expected. i then hit a key to unsuspend. the screen lights and redisplays etc. but no beep, no response to keyboard, ... dead machine except that the screen has relit. i then enabled all the suspend inclined goodies in the pao kernel config (see appended kernel config and dmesg), and got the same result. one time the result was kernel trap 1 with interrupts disabled Fatal trap 1: privileged intruction fault while in kernel mode instruction pointer = 0x48:0x503f stack pointer = 0x10:0xf0216b8c frame pointer = 0x10:0xf0216b9c code segment = base 0xf00f0000, limXXX( proceddor eflags = resume, IOPL = 0 current trap number = 1 panic: privileged instruction fault but usually it just freezes after relighting the screen. note that this is all without any pccards inserted. same result with, but i wanted to simplify things. zzz and the equivalent fn keys worked fine before i went to pao. randy # # Sample Laptop Configuration # Tatsumi Hosokawa # # For more information read the handbook part System Administration -> # Configuring the FreeBSD Kernel -> The Configuration File. # The handbook is available in /usr/share/doc/handbook or online as # latest version from the FreeBSD World Wide Web server # # # An exhaustive list of options and more detailed explanations of the # device lines is present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $Id: GENERIC,v 1.143.2.5 1999/03/29 17:59:38 ken Exp $ machine "i386" cpu "I386_CPU" cpu "I486_CPU" cpu "I586_CPU" cpu "I686_CPU" ident ROAM-PAO maxusers 64 #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem #options MFS_ROOT #MFS usable as root device, "MFS" req'ed options NFS #Network Filesystem #options NFS_ROOT #NFS usable as root device, "NFS" req'ed options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem #options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] #options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor # If your laptop have not had Windoze95-Ready BIOS, please update it. # Such old BIOS'es sometimes have critical bugs at 32-bit protected # mode APM BIOS interface (which have not used by Windoze 3.1). # PC-card suspend/resume support (experimental) options APM_PCCARD_RESUME options PCIC_RESUME_RESET # Keep power for serial cards when the system suspends # (If your machine hangs up when you try to suspend the system with # FAX/Modem PCMCIA card, uncomment this option). #options SIO_SUSP_KEEP_PWR # Detach SCSI devices when the SCSI card is removed #options SCSI_DETACH # Detach ATAPI devices when the ATA card is removed #options ATAPI_DETACH # Japanese version of WaveLAN PCMCIA uses 2.4GHz band instead of 915MHz # band that US version uses. If you want to use Japanese version of # WaveLAN, uncomment this line, or edit the corresponding config entry # of /etc/pccard.conf. #options "WAVELAN_PCMCIA_24" # Suspend the system when the battery status is "Low" #options "APM_BATT_LOW_SUSPEND" # If you want to use NTP on laptop machines, uncomment the following # option. Current APM implementation affects NTP client. options "APM_NO_CLOCK_ADJUST" # Some X-servers cannot survive suspend/resume on laptop. # This option kicks her when the system is resumed from suspended mode. options SYSCONS_VTY_RESUME config kernel root on wd0 controller isa0 #controller eisa0 controller pci0 # Dont remove these two lines! pseudo-device card 1 # You must use "flags 0x1" when you don't hear any negotiation noise(?) # if you use modem card, or pccardd doesn't read cis tuple, tell you # 'No card in database for"(null)"("(null)")' in case of Cirrus Logic's # pcic is your PC. #device pcic0 at isa? port 0x3e0 flags 0x1 irq 11 device pcic0 at isa? port 0x3e0 irq 11 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 disk fd0 at fdc0 drive 0 #disk fd1 at fdc0 drive 1 options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 disk wd0 at wdc0 drive 0 #disk wd1 at wdc0 drive 1 #controller wdc1 at isa? port "IO_WD2" bio irq 15 #disk wd2 at wdc1 drive 0 #disk wd3 at wdc1 drive 1 #options ATAPI #Enable ATAPI support for IDE bus #options ATAPI_STATIC #Don't do it as an LKM #device acd0 #IDE CD-ROM #device wfd0 #IDE Floppy (e.g. LS-120) # A single entry for any of these controllers (ncr, ahb, ahc) is # sufficient for any number of installed devices. #controller ncr0 #controller ahb0 #controller ahc0 #controller isp0 #controller dpt0 #controller adv0 at isa? port ? cam irq ? #controller adw0 #controller bt0 at isa? port ? cam irq ? #controller aha0 at isa? port ? cam irq ? #controller scbus0 #device da0 #device sa0 #device pass0 #device cd0 #Only need one of these, the code dynamically grows #device wt0 at isa? port 0x300 bio irq 5 drq 1 #device mcd0 at isa? port 0x300 bio irq 10 #controller matcd0 at isa? port 0x230 bio #device scd0 at isa? port 0x230 bio # atkbdc0 controlls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 device psm0 at isa? tty irq 12 device vga0 at isa? port ? conflicts # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? tty options MAXCONS=4 # number of virtual consoles # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? tty #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Mandatory, don't remove device npx0 at isa? port IO_NPX irq 13 # # Laptop support (see LINT for more options) # device apm0 at isa? # Advanced Power Management options APM_BROKEN_STATCLOCK # Workaround some buggy APM BIOS # PCCARD (PCMCIA) support #controller card0 #device pcic0 at card? #device pcic1 at card? device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 device sio1 at isa? port "IO_COM2" tty irq 3 #device sio2 at isa? disable port "IO_COM3" tty irq 5 #device sio3 at isa? disable port "IO_COM4" tty irq 9 # Parallel port device ppc0 at isa? port? net irq 7 controller ppbus0 device nlpt0 at ppbus? #device plip0 at ppbus? #device ppi0 at ppbus? #controller vpo0 at ppbus? # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. #device ax0 #device de0 #device fxp0 #device mx0 #device pn0 #device rl0 #device tl0 #device tx0 #device vr0 #device vx0 #device wb0 #device xl0 #device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 #device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 device ep0 at isa? port 0x300 net irq 10 #device ex0 at isa? port? net irq? #device fe0 at isa? port 0x300 net irq ? #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 #device lnc0 at isa? port 0x280 net irq 10 drq 0 #device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 #device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 #device cs0 at isa? port 0x300 net irq ? device wlp0 at isa? port 0x300 net irq 11 pseudo-device loop pseudo-device ether #pseudo-device sl 1 #pseudo-device ppp 1 pseudo-device tun 1 pseudo-device pty 16 #pseudo-device gzip # Exec gzipped a.out's # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. options KTRACE #kernel tracing # This provides support for System V shared memory and message queues. # options SYSVSHM options SYSVMSG # The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be # aware of the legal and administrative consequences of enabling this # option. The number of devices determines the maximum number of # simultaneous BPF clients programs runnable. pseudo-device bpfilter 4 #Berkeley packet filter Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.1-RELEASE #0: Sun Apr 25 09:03:37 PDT 1999 root@roam.psg.com:/usr/src/sys/compile/ROAM-PAO Timecounter "i8254" frequency 1193182 Hz CPU: Pentium/P55C (quarter-micron) (298.42-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x582 Stepping=2 Features=0x8001bf real memory = 134217728 (131072K bytes) avail memory = 127889408 (124892K bytes) Preloaded elf kernel "kernel" at 0xf0284000. Probing for devices on PCI bus 0: chip0: rev 0x01 on pci0.0.0 chip1: rev 0x02 on pci0.7.0 ide_pci0: rev 0x01 on pci0.7.1 chip2: rev 0x02 on pci0.7.3 vga0: rev 0x01 int a irq 9 on pci0.8.0 pcic0: rev 0x00 int a irq 255 on pci0.10.0 RL5C4XX PCI Config Reg: [CSC isa irq] Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <4 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 irq 12 on isa psm0: model Generic PS/2 mouse, device ID 0 sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 6194MB (12685680 sectors), 13424 cyls, 15 heads, 63 S/T, 512 B/S ppc0 at 0x378 irq 7 on isa ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold nlpt0: on ppbus 0 nlpt0: Interrupt-driven port ep0 not found at 0x300 wlp0 not found at 0x300 pcic0 at 0x3e0-0x3e1 irq 11 on isa PC-Card ctlr(0) Ricoh RL5C475/476 [CardBus bridge mode] (5 mem & 2 I/O windows) pcic0: slot 0 controller I/O address 0x3e0 vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface apm0 on isa apm: found APM BIOS version 1.2 Intel Pentium detected, installing workaround for F00F bug changing root device to wd0s2a Card inserted, slot 0 ep0: utp/bnc[*UTP*] address 00:a0:24:ac:89:33 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message