From owner-freebsd-questions Tue Oct 19 15:27:41 1999 Delivered-To: freebsd-questions@freebsd.org Received: from www.keycomp.net (www.keycomp.net [207.44.1.33]) by hub.freebsd.org (Postfix) with ESMTP id 9443B1521D for ; Tue, 19 Oct 1999 15:27:18 -0700 (PDT) (envelope-from billieakay@yahoo.com) Received: from bopper (kc-rmt09.keycomp.net [207.44.1.11]) by www.keycomp.net (8.8.5/SCO5) with SMTP id SAA04904; Tue, 19 Oct 1999 18:33:53 -0400 (EDT) Message-ID: <001e01bf1a81$0ac2b8a0$0b012ccf@bopper> From: "Bill A. K." To: "Ryan Petty" , References: Subject: Re: Kernel make fails Date: Tue, 19 Oct 1999 18:26:49 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2615.200 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, Did you do a make depend just before you did a make? Good Luck Bill billieakay@yahoo.com ----- Original Message ----- From: Ryan Petty To: Sent: Tuesday, October 19, 1999 4:08 PM Subject: Kernel make fails > Hello, > > I am having trouble compiling a new kernel under FreeBSD-3.3-RELEASE. I > am not new to FreeBSD per se, but am new to configuring and compiling > kernels. > > When I attempt to make a new kernel I received the following error code: > > loading kernel > ioconf.o(.data+0xd0): undefined reference to `aicdriver' > *** Error code 1 > > Stop. > > I then went back into my kernel config file and commented out all the IDE > and ATAPI controllers and drives (as I do not have any IDE devices > installed). I then received the following error: > > cc -c -O -Wreturn-type -Wcomment -Wredundant-decls -Wimplicit > -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith > -Winline -Wuninitialized -Wformat -Wunused -fformat-extensions -ansi > -nostdinc -I- -I. -I../.. -I../../../include -DKERNEL -DVM_STACK -include > opt_global.h -elf vers.c > loading kernel > ioconf.o(.data+0x48): undefined reference to `aicdriver' > *** Error code 1 > > Stop. > > I have included a bit of the output of make before the error if it helps > to determine where the error is occurring. I am including my kernel > config file for review. > > Thanks in advance for any help you can give me. > > > # > # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks > # > # For more information on this file, please read the handbook section on > # Kernel Configuration Files: > # > # http://www.freebsd.org/handbook/kernelconfig-config.html > # > # The handbook is also available locally in /usr/share/doc/handbook > # if you've installed the doc distribution, otherwise always see the > # FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the > # latest information. > # > # An exhaustive list of options and more detailed explanations of the > # device lines is also present in the ./LINT configuration file. If you are > # in doubt as to the purpose or necessity of a line, check first in LINT. > # > # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.143.2.22 1999/09/14 22:53:30 jkh Exp $ > > machine "i386" > #cpu "I386_CPU" > #cpu "I486_CPU" > #cpu "I586_CPU" > cpu "I686_CPU" > ident "NEXUS6-1" > maxusers 64 > > #options MATH_EMULATE #Support for x87 emulation > options INET #InterNETworking > options FFS #Berkeley Fast Filesystem > options FFS_ROOT #FFS usable as root device [keep this!] > options MFS #Memory Filesystem > options MFS_ROOT #MFS usable as root device, "MFS" req'ed > options NFS #Network Filesystem > #options NFS_ROOT #NFS usable as root device, "NFS" req'ed > options MSDOSFS #MSDOS Filesystem > options "CD9660" #ISO 9660 Filesystem > #options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed > options PROCFS #Process filesystem > options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] > options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device > options UCONSOLE #Allow users to grab the console > options FAILSAFE #Be conservative > options USERCONFIG #boot -c editor > options VISUAL_USERCONFIG #visual boot -c editor > #options KTRACE #ktrace(1) syscall trace support > options SYSVSHM #SYSV-style shared memory > options SYSVMSG #SYSV-style message queues > options SYSVSEM #SYSV-style semaphores > options COMPAT_LINUX # 10/19/99 -rbp > options "MAXMEM=(256*1024)" # 10/19/99 -rbp > options IPFIREWALL # 10/19/99 -rbp > options IPDIVERT # 10/19/99 -rbp > options QUOTA # 10/19/99 -rbp > > config kernel root on da0 > > # To make an SMP kernel, the next two are needed > #options SMP # Symmetric MultiProcessor Kernel > #options APIC_IO # Symmetric (APIC) I/O > # Optionally these may need tweaked, (defaults shown): > #options NCPU=2 # number of CPUs > #options NBUS=4 # number of busses > #options NAPIC=1 # number of IO APICs > #options NINTR=24 # number of INTs > > controller isa0 > controller pnp0 # PnP support for ISA > controller eisa0 > controller pci0 > > # Floppy drives > controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 > disk fd0 at fdc0 drive 0 > disk fd1 at fdc0 drive 1 > > # IDE controller and disks > #options "CMD640" # work around CMD640 chip deficiency > #controller wdc0 at isa? port "IO_WD1" bio irq 14 > #disk wd0 at wdc0 drive 0 > #disk wd1 at wdc0 drive 1 > > #controller wdc1 at isa? port "IO_WD2" bio irq 15 > #disk wd2 at wdc1 drive 0 > #disk wd3 at wdc1 drive 1 > > # ATAPI devices > #options ATAPI #Enable ATAPI support for IDE bus > #options ATAPI_STATIC #Don't do it as an LKM > #device acd0 #IDE CD-ROM > #device wfd0 #IDE Floppy (e.g. LS-120) > > # SCSI Controllers > # A single entry for any of these controllers (ncr, ahb, ahc) is > # sufficient for any number of installed devices. > #controller ncr0 # NCR/Symbios Logic > #controller ahb0 # EISA AHA1742 family > controller ahc0 # AHA2940 and onboard AIC7xxx devices > #controller amd0 # AMD 53C974 (Teckram DC-390(T)) > #controller isp0 # Qlogic family > #controller dpt0 # DPT Smartcache - See LINT for options! > > #controller adv0 at isa? port ? cam irq ? > #controller adw0 > #controller bt0 at isa? port ? cam irq ? > #controller aha0 at isa? port 0x340 cam irq 9 > controller aic0 at isa? port 0x340 bio irq 9 vector aicintr > > # SCSI peripherals > # Only one of each of these is needed, they are dynamically allocated. > controller scbus0 # SCSI bus (required) > device da0 # Direct Access (disks) > device sa0 # Sequential Access (tape etc) > device cd0 # CD > device pass0 # Passthrough device (direct SCSI) > > # Proprietary or custom CD-ROM Interfaces > #device wt0 at isa? port 0x300 bio irq 5 drq 1 > #device mcd0 at isa? port 0x300 bio irq 10 > #device matcd0 at isa? port 0x230 bio > #device scd0 at isa? port 0x230 bio > > # atkbdc0 controls both the keyboard and the PS/2 mouse > controller atkbdc0 at isa? port IO_KBD tty > device atkbd0 at isa? tty irq 1 > device psm0 at isa? tty irq 12 > > device vga0 at isa? port ? conflicts > > # splash screen/screen saver > pseudo-device splash > > # syscons is the default console driver, resembling an SCO console > device sc0 at isa? tty > > # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver > #device vt0 at isa? tty > #options XSERVER # support for X server > #options FAT_CURSOR # start with block cursor > # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines > #options PCVT_SCANSET=2 # IBM keyboards are non-std > > # Floating point support - do not disable. > device npx0 at isa? port IO_NPX irq 13 > > # Power management support (see LINT for more options) > #device apm0 at isa? disable flags 0x31 # Advanced Power Management > > # PCCARD (PCMCIA) support > #controller card0 > #device pcic0 at card? > #device pcic1 at card? > > # Serial (COM) ports > device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 > device sio1 at isa? port "IO_COM2" tty irq 3 > #device sio2 at isa? disable port "IO_COM3" tty irq 5 > #device sio3 at isa? disable port "IO_COM4" tty irq 9 > > # Parallel port > device ppc0 at isa? port? flags 0x40 net irq 7 > controller ppbus0 # Parallel port bus (required) > device lpt0 at ppbus? # Printer > device plip0 at ppbus? # TCP/IP over parallel > device ppi0 at ppbus? # Parallel port interface device > #controller vpo0 at ppbus? # Requires scbus and da0 > > # PCI Ethernet NICs. > #device al0 # ADMtek AL981 (``Comet'') > #device ax0 # ASIX AX88140A > #device de0 # DEC/Intel DC21x4x (``Tulip'') > device fxp0 # Intel EtherExpress PRO/100B (82557, 82558) > #device mx0 # Macronix 98713/98715/98725 (``PMAC'') > #device pn0 # Lite-On 82c168/82c169 (``PNIC'') > #device rl0 # RealTek 8129/8139 > #device sf0 # Adaptec AIC-6915 DuraLAN (``Starfire'') > #device tl0 # Texas Instruments ThunderLAN > #device tx0 # SMC 9432TX (83c170 ``EPIC'') > #device vr0 # VIA Rhine, Rhine II > #device vx0 # 3Com 3c590, 3c595 (``Vortex'') > #device wb0 # Winbond W89C840F > #device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'') > > # ISA Ethernet NICs. > # Order is important here due to intrusive probes, do *not* alphabetize > # this list of network interfaces until the probes have been fixed. > # Right now it appears that the ie0 must be probed before ep0. See > # revision 1.20 of this file. > #device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 > #device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 > #device ep0 at isa? port 0x300 net irq 10 > #device ex0 at isa? port? net irq? > #device fe0 at isa? port 0x300 net irq ? > #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 > #device lnc0 at isa? port 0x280 net irq 10 drq 0 > #device cs0 at isa? port 0x300 net irq ? > # requires PCCARD (PCMCIA) support to be activated > #device xe0 at isa? port? net irq ? > > # PCCARD NIC drivers. > # ze and zp take over the pcic and cannot coexist with generic pccard > # support, nor the ed and ep drivers they replace. > #device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 > #device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 > > # Pseudo devices - the number indicates how many units to allocated. > pseudo-device loop # Network loopback > pseudo-device ether # Ethernet support > pseudo-device sl 1 # Kernel SLIP > pseudo-device ppp 1 # Kernel PPP > pseudo-device tun 1 # Packet tunnel > pseudo-device pty 64 # Pseudo-ttys (telnet etc) > pseudo-device gzip # Exec gzipped a.out's > > # The `bpfilter' pseudo-device enables the Berkeley Packet Filter. > # Be aware of the administrative consequences of enabling this! > # The number of devices determines the maximum number of > # simultaneous BPF clients programs runnable. > pseudo-device bpfilter 1 #Berkeley packet filter > > > > _______________________ > Ryan Petty > SourceNet Corporation > http://www.source.net > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message