From owner-freebsd-questions Thu Jun 3 18:52: 9 1999 Delivered-To: freebsd-questions@freebsd.org Received: from zvi.t-networking.com (zvi.t-networking.com [206.117.19.2]) by hub.freebsd.org (Postfix) with ESMTP id C402B15A3D for ; Thu, 3 Jun 1999 18:52:05 -0700 (PDT) (envelope-from zvi@zvi.t-networking.com) Received: from localhost (zvi@localhost) by zvi.t-networking.com (8.8.8/8.8.8) with ESMTP id SAA00262 for ; Thu, 3 Jun 1999 18:46:54 -0700 (PDT) (envelope-from zvi@zvi.t-networking.com) Date: Thu, 3 Jun 1999 18:46:53 -0700 (PDT) From: Brad Tucker To: freebsd-questions@freebsd.org Subject: Re: 2 ethernet cards (fwd) Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG ---------- Forwarded message ---------- Date: Thu, 3 Jun 1999 18:32:33 -0700 (PDT) From: Brad Tucker To: Dan Busarow Subject: Re: 2 ethernet cards Ok, I disabled netatalk all together to just see if I could get the TCP/IP to work right. It still will not work. I disable routed by changinging the statement router enable="no" if you specify yes it tries to launch routed. while on the server with the two ethernet cards I can ping the upper block of IP address (64-127) and the lower block of ips (1-63). the lower block is used for all virtual domains, and they all work fine. when on the upper block of ip (64-127) the machines will not look past itself. so, say i was on 206.117.19.125. when i run a traceroute from that machine, that is as far as it gets. it should go to 206.117.19.2, and then onto the other router, but it is not. It just stays on 206.117.19.125 and does nothing else. Like wise if im on a machine compleatly off the network i can ping address 206.117.19.0 - 206.117.19.63. 64-127 cannot be pinged from another network. The setups on the mac is this: IP ADDRESS 206.117.19.125 SUBNETMASK 255.255.255.192 ROUTER ADDRESS 206.117.19.64 NAMESERVER 206.117.19.2 zvi: {101} % netstat -rn Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire default 206.117.19.1 UGSc 16 250 ed0 127.0.0.1 127.0.0.1 UH 0 0 lo0 206.117.19/26 link#1 UC 0 0 206.117.19.1 0:0:c:38:91:d2 UHLW 15 0 ed0 196 206.117.19.2 0:0:21:61:be:16 UHLW 1 20 lo0 206.117.19.8 link#1 UHLW 0 10 206.117.19.64/26 link#2 UC 0 0 206.117.19.124 0:40:5:69:59:3 UHLW 0 13 ed1 244 206.117.19.125 0:5:2:cd:ef:6b UHLW 2 96 ed1 1136 206.117.19.126 0:0:21:cf:9:d2 UHLW 0 4 lo0 AppleTalk: Destination Gateway Flags Refs Use Netif Expire zvi: {102} % netstat -in Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll ed0 1500 00.00.21.61.be.16 424 0 255 0 12 ed0 1500 206.117.19/26 206.117.19.2 424 0 255 0 12 ed1 1500 00.00.21.cf.09.d2 281 0 308 26 423 ed1 1500 206.117.19.64 206.117.19.126 281 0 308 26 423 lo0 16384 24 0 24 0 0 lo0 16384 127 127.0.0.1 24 0 24 0 0 rc.conf: ############################################################## ### Network configuration sub-section ###################### ############################################################## ### Basic network options: ### hostname="zvi.t-networking.com" # Set this! nisdomainname="NO" # Set to NIS domain if using NIS (or NO). firewall_enable="NO" # Set to YES to enable firewall functionality firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) firewall_quiet="NO" # Set to YES to suppress rule display tcp_extensions="YES" # Allow RFC1323 & RFC1644 extensions (or NO). network_interfaces="ed0 ed1 lo0" # List of network interfaces (lo0 is loo pback). ifconfig_ed0="inet 206.117.19.2 netmask 255.255.255.192" ifconfig_ed1="inet 206.117.19.126 netmask 255.255.255.192" ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. ### Network routing options: ### defaultrouter="206.117.19.1" # Set to default gateway (or NO). static_routes="" # Set to static route list (or leave empty). gateway_enable="YES" # Set to YES if this host will be a gateway. router_enable="" # Set to YES to enable a routing daemon. router="" # Name of routing daemon to use if enabled. router_flags="" # Flags for routing daemon. mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). mrouted_flags="" # Flags for multicast routing daemon. ipxgateway_enable="NO" # Set to YES to enable IPX routing. ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. ipxrouted_flags="" # Flags for IPX routing daemon. arpproxy_all="" # replaces obsolete kernel option ARP_PROXYALL. forward_sourceroute="" # do source routing (only if gateway_enable is set to "Y ES") accept_sourceroute="" # accept source routed packets to us natd_enable="NO" # Enable natd if firewall_enable. natd_interface="fxp0" # Public interface to use with natd if natd_enab le. natd_flags="" zvi: {105} % ifconfig -a ed0: flags=8a43 mtu 1500 inet 206.117.19.2 netmask 0xffffffc0 broadcast 206.117.19.63 ether 00:00:21:61:be:16 ed1: flags=8a43 mtu 1500 inet 206.117.19.126 netmask 0xffffffc0 broadcast 206.117.19.127 ether 00:00:21:cf:09:d2 lo0: flags=8049 mtu 16384 inet 127.0.0.1 netmask 0xff000000 Hopefully this is all the info you need. Thanks again for all your help Thanks, Brad On Thu, 3 Jun 1999, Dan Busarow wrote: > On Thu, 3 Jun 1999, Brad Tucker wrote: > > zvi: {115} % netstat -rn > > Routing tables > > Looks good. You only have one Mac using TCP/IP and all the rest are > just Appletalk? > > > zvi: {116} % netstat -in > > Name Mtu Network Address Ipkts Ierrs Opkts Oerrs > > Coll > > ed0 1500 00.00.21.61.be.16 1971 0 2078 0 > > 24 > > ed0 1500 206.117.19/26 206.117.19.2 1971 0 2078 0 > > Good > > > 24 > > ed1 1500 00.00.21.cf.09.d2 9474 0 29077 0 > > 0 > > ed1 1500 206.117.19.64 206.117.19.126 9474 0 29077 0 > > Hmmm, not good. > > > ed1 1500 atalk:0-65534 65280.146 9474 0 29077 0 > > 0 > > lo0 16384 267 0 267 0 > > 0 > > lo0 16384 127 127.0.0.1 267 0 267 0 > > 0 > > lo0 16384 atalk:0 0.0 267 0 267 0 > > 0 > > lo0 16384 206.117.19/25 206.117.19.16 267 0 267 0 > > 0 > > lo0 16384 206.117.19/25 206.117.19.17 267 0 267 0 > > You need to change the subnet masks on the hosts in the .0/26 subnet. > They're still using a /25 > > > > ### Network routing options: ### > > defaultrouter="206.117.19.1" # Set to default gateway (or NO). > > static_routes="" # Set to static route list (or leave empty). > > gateway_enable="YES" # Set to YES if this host will be a > > gateway. > > router_enable="YES" # Set to YES to enable a routing daemon. > > Disable routed. > > Dan > -- > Dan Busarow 949 443 4172 > Dana Point Communications, Inc. dan@dpcsys.com > Dana Point, California 83 09 EF 59 E0 11 89 B4 8D 09 DB FD E1 DD 0C 82 > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message