From owner-freebsd-hackers Sat Dec 9 14:57:18 1995 Return-Path: owner-hackers Received: (from root@localhost) by freefall.freebsd.org (8.7.3/8.7.3) id OAA25160 for hackers-outgoing; Sat, 9 Dec 1995 14:57:18 -0800 (PST) Received: from csugrad.cs.vt.edu (jagnew@csugrad.cs.vt.edu [128.173.41.74]) by freefall.freebsd.org (8.7.3/8.7.3) with SMTP id OAA25148 for ; Sat, 9 Dec 1995 14:57:14 -0800 (PST) Received: (jagnew@localhost) by csugrad.cs.vt.edu (8.6.12/8.6.4) id RAA08336; Sat, 9 Dec 1995 17:57:12 -0500 Date: Sat, 9 Dec 1995 17:57:12 -0500 (EST) From: "H. Jared Agnew" To: hackers@freebsd.org Subject: Install problem (-c) (fwd) Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-hackers@freebsd.org Precedence: bulk *** NEW STUFF *** since I sent this to questions at freebsd.org I've tried unpluging the mouse, disabling the cashe, taking out the cash, hitting keys at boot up, and a few varous other ideas, none that worked. I'm writing here because I thougt someone might have the code. I'm not subscribed to this list, so if you are writing back will you please write to me and the list. Thanks and I would aprietiate any help. ***************** *** OLD STUFF *** I am a fairly new user but I can get my way around, at least the instalation. I have installed on five systems so far and just minor problems but here is the stumper. I am trying to install to a Dell Dimension P100 with 16M of ram, an NE2000 ethernet card, and a 771 #9 video card with 2M of vram. It has two IDE controlers off of the mother board, one for the CDROM, and one for the IDE Hard drive. I am trying to install to the machine however I run into a new problem. I have to -c the boot for two reasons 1. I need to configure the ethernet card 2. I need to disable some of the devices that will interfere with the card When I dont -c the boot off of the instalation floppie (boot.flp) and let it go through the probing of all the devices it doesn't find the ethernet card. When I do -c the boot and disable the drivers I don't need and then change the value for ed0 for the ethernet card. It finds the card and probes everything else fine. However when I get to the inital installation menu, the machine (or at least the keyboard) is locked up and it will not allow me to do any user input. I have tried to get around this problem by installing without the -c and then configuring the port and irq for the card on a boot off of the hard drive. However when I -c on the hard drive boot it will alow me the same options. I can disable all the things I dont want probed and I can change settings so it finds ethernet card. When I quit the configure it goes through all the probing and again locks up at the first time it wants user input. This is at the Login prompt for boots off of the hard drive. The problem with this is that after I have set the card values and disabled the drivers I dont want, the machine locks up. Then I have to turn the machine off and the disks are not sync'ed. There for I usually have a failure on booting the next time. I know that one way to get way arround this is to compile a kernel with my settings and my devices that I want probed already built in however, I need to get his installation over ethernet so I need to -c when booting off of the boot.flp. If you have any sudgestions I would greatly apretiate it. If you know please write because I've asked a ton of people and they dont know either. If anyone knows if it may be a problem with any kind of hardware that he might have in his machine will you also include that in what ever you have to tell me. I'm beging, actually he's beging, but I need the help so he stops asking me for help. Thanks in advance! --- Jared --jared@vt.edu Sorry about spelling, must be line noise over my ethernet connection! |------------------------------------| ____ ____ | H. Jared Agnew | jared@vt.edu | | __| | __| | http://csugrad.cs.vt.edu/~jagnew | | |__ | |__ | phone : (540) 232-4438 | | ___| |___ | | alias : killdash9 | | |__ __| | |------------------------------------| |____| . |____| .