From owner-freebsd-stable@FreeBSD.ORG  Sat Dec 17 15:31:00 2011
Return-Path: <owner-freebsd-stable@FreeBSD.ORG>
Delivered-To: freebsd-stable@freebsd.org
Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34])
	by hub.freebsd.org (Postfix) with ESMTP id 4427E106566C;
	Sat, 17 Dec 2011 15:31:00 +0000 (UTC) (envelope-from randy@psg.com)
Received: from ran.psg.com (ran.psg.com [IPv6:2001:418:1::36])
	by mx1.freebsd.org (Postfix) with ESMTP id E24968FC16;
	Sat, 17 Dec 2011 15:30:59 +0000 (UTC)
Received: from localhost ([127.0.0.1] helo=rair.psg.com.psg.com)
	by ran.psg.com with esmtp (Exim 4.76 (FreeBSD))
	(envelope-from <randy@psg.com>)
	id 1RbwDz-000H4Y-CC; Sat, 17 Dec 2011 15:30:59 +0000
Date: Sat, 17 Dec 2011 07:30:59 -0800
Message-ID: <m24nwzp64s.wl%randy@psg.com>
From: Randy Bush <randy@psg.com>
To: "Andrey V. Elsukov" <ae@FreeBSD.org>
In-Reply-To: <4EEC7B54.4070407@FreeBSD.org>
References: <m262hfpitb.wl%randy@psg.com>
	<4EEC7B54.4070407@FreeBSD.org>
User-Agent: Wanderlust/2.15.9 (Almost Unreal) Emacs/22.3 Mule/5.0 (SAKAKI)
MIME-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka")
Content-Type: text/plain; charset=US-ASCII
Cc: FreeBSD Stable <freebsd-stable@freebsd.org>
Subject: Re: 8.2->9.prerel: gmirror failed with error 19
X-BeenThere: freebsd-stable@freebsd.org
X-Mailman-Version: 2.1.5
Precedence: list
List-Id: Production branch of FreeBSD source code <freebsd-stable.freebsd.org>
List-Unsubscribe: <http://lists.freebsd.org/mailman/listinfo/freebsd-stable>, 
	<mailto:freebsd-stable-request@freebsd.org?subject=unsubscribe>
List-Archive: <http://lists.freebsd.org/pipermail/freebsd-stable>
List-Post: <mailto:freebsd-stable@freebsd.org>
List-Help: <mailto:freebsd-stable-request@freebsd.org?subject=help>
List-Subscribe: <http://lists.freebsd.org/mailman/listinfo/freebsd-stable>,
	<mailto:freebsd-stable-request@freebsd.org?subject=subscribe>
X-List-Received-Date: Sat, 17 Dec 2011 15:31:00 -0000

>> neither 9 nor 8 would boot without ending up here
>> the only way out was via loader
>> 
>>     OK unload
>>     OK load boot/kernel.old/kernel
>>     OK load boot/kernel.old/geom_mirror.ko
>>     OK set kern.geom.part.check_integrity=0
>>     OK set vfs.root.mountfrom.options=rw
>>     OK boot -s
>> 
>> this would only work with the 8.2 /boot/kernel.old but not with the
>> 9.fresh /boot/kernel
> 
> You should try boot in verbose mode and, probably, you will see the
> cause of your problem.

sorry, there was nothing tasty i could see

randy

OK lsmod
 0x200000: /boot/kernel/kernel (elf kernel, 0x8f6af8)
  modules: x86bios.1 io.1 ufs.1 kernel_mac_support.4 if_vlan.3 ether.1 sysvshm.1 sysvsem.1 sysvmsg.1 firmware.1 kernel.900044 cd9660.1 isa.1 pseudofs.1 procfs.1 usb_quirk.1 ukbd.1 uhid.1 uhub.1 usb.1 usb_linux.1 umass.1 random.1 pci.1 null.1 mem.1 ata_via.1 ata_sis.1 ata_sii.1 ata_serverworks.1 ata_promise.1 ata_nvidia.1 ata_netcell.1 ata_national.1 ata_micron.1 ata_marvell.1 ata_jmicron.1 ata_ite.1 ata_intel.1 ata_highpoint.1 ata_cyrix.1 ata_cypress.1 ata_cenatek.1 ata_ati.1 ata_amd.1 ata_adaptec.1 ata_ali.1 ata_acard.1 ata_ahci.1 atapci.1 ata.1 acpi_pci.1 acpi.1 cam.1 
 0xaf7000: /boot/kernel/geom_mirror.ko (elf obj module, 0x215f0)
 0xb185f0: /boot/zfs/zpool.cache (/boot/zfs/zpool.cache, 0x7a4)
OK boot -v -s
SMAP type=01 base=0000000000000000 len=000000000009d000
SMAP type=02 base=000000000009d000 len=0000000000003000
SMAP type=02 base=00000000000e4000 len=000000000001c000
SMAP type=01 base=0000000000100000 len=00000000dfde0000
SMAP type=03 base=00000000dfee0000 len=0000000000009000
SMAP type=04 base=00000000dfee9000 len=0000000000017000
SMAP type=02 base=00000000dff00000 len=0000000000100000
SMAP type=02 base=00000000f0000000 len=0000000004000000
SMAP type=02 base=00000000fec00000 len=0000000000010000
SMAP type=02 base=00000000fee00000 len=0000000000001000
SMAP type=02 base=00000000ff000000 len=0000000001000000
SMAP type=01 base=0000000100000000 len=0000000020000000
Table 'FACP' at 0xdfee8e51
Table 'MCFG' at 0xdfee8ec5
Table 'APIC' at 0xdfee8f01
APIC: Found table at 0xdfee8f01
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
SMP: Added CPU 1 (AP)
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-PRERELEASE #18: Tue Dec 13 12:20:57 GMT 2011
    root@work0.psg.com:/usr/obj/usr/src/sys/WORK0 amd64
Table 'FACP' at 0xdfee8e51
Table 'MCFG' at 0xdfee8ec5
Table 'APIC' at 0xdfee8f01
Table 'BOOT' at 0xdfee8f75
Table 'ASF!' at 0xdfee8f9d
Table 'SSDT' at 0xdfee25e0
ACPI: No SRAT table found
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80b1a000.
Preloaded elf obj module "/boot/kernel/geom_mirror.ko" at 0xffffffff80b1a208.
Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 0xffffffff80b1a8b8.
Calibrating TSC clock ... TSC clock: 1995039920 Hz
CPU: Intel(R) Pentium(R) Dual  CPU  E2180  @ 2.00GHz (1995.04-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fd  Family = 6  Model = f  Stepping = 13
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 4294967296 (4096 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000098fff, 622592 bytes (152 pages)
0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
0x0000000000b4a000 - 0x00000000d7757fff, 3602964480 bytes (879630 pages)
0x0000000100000000 - 0x000000011ffeffff, 536805376 bytes (131056 pages)
avail memory = 4107489280 (3917 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <PTLTD  	 APIC  >
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
x86bios:  IVT 0x000000-0x0004ff at 0xfffffe0000000000
x86bios: SSEG 0x001000-0x001fff at 0xffffff8000215000
x86bios: EBDA 0x09d000-0x09ffff at 0xfffffe000009d000
x86bios:  ROM 0x0a0000-0x0fefff at 0xfffffe00000a0000
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
ULE: setup cpu 0
ULE: setup cpu 1
ACPI: RSDP 0xf5e20 00014 (v00 PTLTD )
ACPI: RSDT 0xdfee25a4 0003C (v01 PTLTD    RSDT   06040000  LTP 00000000)
ACPI: FACP 0xdfee8e51 00074 (v01 INTEL           06040000 PTL  00000003)
ACPI: DSDT 0xdfee39cc 05485 (v01  INTEL GLENWOOD 06040000 MSFT 0100000E)
ACPI: FACS 0xdfee9fc0 00040
ACPI: MCFG 0xdfee8ec5 0003C (v01 PTLTD    MCFG   06040000  LTP 00000000)
ACPI: APIC 0xdfee8f01 00074 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
ACPI: BOOT 0xdfee8f75 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
ACPI: ASF! 0xdfee8f9d 00063 (v32   CETP     CETP 06040000 PTL  00000001)
ACPI: SSDT 0xdfee25e0 013EC (v01  PmRef    CpuPm 00003000 INTL 20050228)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 3, Interrupt 24 at 0xfec10000
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00000200 err: 0x000000f0 pmc: 0x00010400
io: <I/O>
mem: <memory>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
acpi0: <PTLTD   RSDT> on motherboard
PCIe: Memory Mapped configuration base @ 0xf0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: Power Button (fixed)
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 0/1 -> 9
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
cpu1: <ACPI CPU> on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    7   N     0  3 10 11 14 15
  Validation          0  255   N     0  3 10 11 14 15
  After Disable       0  255   N     0  3 10 11 14 15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 10 11 14 15
  Validation          0   11   N     0  3 10 11 14 15
  After Disable       0  255   N     0  3 10 11 14 15
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  3 10 11 14 15
  Validation          0  255   N     0  3 10 11 14 15
  After Disable       0  255   N     0  3 10 11 14 15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 10 11 14 15
  Validation          0   11   N     0  3 10 11 14 15
  After Disable       0  255   N     0  3 10 11 14 15
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 10 11 14 15
  Validation          0  255   N     0  3 10 11 14 15
  After Disable       0  255   N     0  3 10 11 14 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 10 11 14 15
  Validation          0  255   N     0  3 10 11 14 15
  After Disable       0  255   N     0  3 10 11 14 15
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 10 11 14 15
  Validation          0  255   N     0  3 10 11 14 15
  After Disable       0  255   N     0  3 10 11 14 15
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 10 11 14 15
  Validation          0   10   N     0  3 10 11 14 15
  After Disable       0  255   N     0  3 10 11 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: decoding 4 range 0-0xcf7
pcib0: decoding 3 range 0xa0000-0xbffff
pcib0: decoding 3 range 0xcc000-0xcffff
pcib0: decoding 3 range 0xd0000-0xd3fff
pcib0: decoding 3 range 0xd4000-0xd7fff
pcib0: decoding 3 range 0xd8000-0xdbfff
pcib0: decoding 3 range 0xdc000-0xdffff
pcib0: decoding 3 range 0xe0000-0xe3fff
pcib0: decoding 3 range 0xe0000000-0xefffffff
pcib0: decoding 4 range 0xd00-0xfdff
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x2778, revid=0xc0
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2779, revid=0xc0
	domain=0, bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x45 (17250 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=7
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x27d0, revid=0x01
	domain=0, bus=0, slot=28, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found->	vendor=0x8086, dev=0x27e0, revid=0x01
	domain=0, bus=0, slot=28, func=4
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found->	vendor=0x8086, dev=0x27e2, revid=0x01
	domain=0, bus=0, slot=28, func=5
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=7
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 16
found->	vendor=0x8086, dev=0x27c8, revid=0x01
	domain=0, bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[20]: type I/O Port, range 32, base 0x3000, size  5, enabled
pcib0: allocated type 4 (0x3000-0x301f) for rid 20 of pci0:0:29:0
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found->	vendor=0x8086, dev=0x27c9, revid=0x01
	domain=0, bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[20]: type I/O Port, range 32, base 0x3020, size  5, enabled
pcib0: allocated type 4 (0x3020-0x303f) for rid 20 of pci0:0:29:1
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found->	vendor=0x8086, dev=0x27ca, revid=0x01
	domain=0, bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=5
	map[20]: type I/O Port, range 32, base 0x3040, size  5, enabled
pcib0: allocated type 4 (0x3040-0x305f) for rid 20 of pci0:0:29:2
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x27cb, revid=0x01
	domain=0, bus=0, slot=29, func=3
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=7
	map[20]: type I/O Port, range 32, base 0x3060, size  5, enabled
pcib0: allocated type 4 (0x3060-0x307f) for rid 20 of pci0:0:29:3
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 16
found->	vendor=0x8086, dev=0x27cc, revid=0x01
	domain=0, bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xe8600000, size 10, enabled
pcib0: allocated type 3 (0xe8600000-0xe86003ff) for rid 10 of pci0:0:29:7
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found->	vendor=0x8086, dev=0x244e, revid=0xe1
	domain=0, bus=0, slot=30, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x27b8, revid=0x01
	domain=0, bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x27df, revid=0x01
	domain=0, bus=0, slot=31, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
pcib0: allocated type 4 (0x1f0-0x1f7) for rid 10 of pci0:0:31:1
pcib0: allocated type 4 (0x3f6-0x3f6) for rid 14 of pci0:0:31:1
pcib0: allocated type 4 (0x170-0x177) for rid 18 of pci0:0:31:1
pcib0: allocated type 4 (0x376-0x376) for rid 1c of pci0:0:31:1
	map[20]: type I/O Port, range 32, base 0x30a0, size  4, enabled
pcib0: allocated type 4 (0x30a0-0x30af) for rid 20 of pci0:0:31:1
found->	vendor=0x8086, dev=0x27c1, revid=0x01
	domain=0, bus=0, slot=31, func=2
	class=01-06-01, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
	map[10]: type I/O Port, range 32, base 0x30e8, size  3, enabled
pcib0: allocated type 4 (0x30e8-0x30ef) for rid 10 of pci0:0:31:2
	map[14]: type I/O Port, range 32, base 0x30dc, size  2, enabled
pcib0: allocated type 4 (0x30dc-0x30df) for rid 14 of pci0:0:31:2
	map[18]: type I/O Port, range 32, base 0x30e0, size  3, enabled
pcib0: allocated type 4 (0x30e0-0x30e7) for rid 18 of pci0:0:31:2
	map[1c]: type I/O Port, range 32, base 0x30d8, size  2, enabled
pcib0: allocated type 4 (0x30d8-0x30db) for rid 1c of pci0:0:31:2
	map[20]: type I/O Port, range 32, base 0x30b0, size  4, enabled
pcib0: allocated type 4 (0x30b0-0x30bf) for rid 20 of pci0:0:31:2
	map[24]: type Memory, range 32, base 0xe8600400, size 10, enabled
pcib0: allocated type 3 (0xe8600400-0xe86007ff) for rid 24 of pci0:0:31:2
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found->	vendor=0x8086, dev=0x27da, revid=0x01
	domain=0, bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0101, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[20]: type I/O Port, range 32, base 0x1100, size  5, enabled
pcib0: allocated type 4 (0x1100-0x111f) for rid 20 of pci0:0:31:3
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   no prefetched decode
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib0: allocated type 3 (0xe8100000-0xe81fffff) for rid 20 of pcib2
pcib2:   domain            0
pcib2:   secondary bus     9
pcib2:   subordinate bus   10
pcib2:   memory decode     0xe8100000-0xe81fffff
pcib2:   no prefetched decode
pci9: <ACPI PCI bus> on pcib2
pci9: domain=0, physical bus=9
found->	vendor=0x8086, dev=0x032c, revid=0x09
	domain=0, bus=9, slot=0, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
found->	vendor=0x8086, dev=0x0326, revid=0x09
	domain=0, bus=9, slot=0, func=1
	class=08-00-20, hdrtype=0x00, mfdev=1
	cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xe8100000, size 12, enabled
pcib2: allocated memory range (0xe8100000-0xe8100fff) for rid 10 of pci0:9:0:1
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci9
pcib3:   domain            0
pcib3:   secondary bus     10
pcib3:   subordinate bus   10
pcib3:   no prefetched decode
pci10: <ACPI PCI bus> on pcib3
pci10: domain=0, physical bus=10
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pcib0: allocated type 4 (0x4000-0x4fff) for rid 1c of pcib4
pcib0: allocated type 3 (0xe8000000-0xe80fffff) for rid 20 of pcib4
pcib4:   domain            0
pcib4:   secondary bus     13
pcib4:   subordinate bus   13
pcib4:   I/O decode        0x4000-0x4fff
pcib4:   memory decode     0xe8000000-0xe80fffff
pcib4:   no prefetched decode
pci13: <ACPI PCI bus> on pcib4
pci13: domain=0, physical bus=13
found->	vendor=0x8086, dev=0x108c, revid=0x03
	domain=0, bus=13, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=7
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 32, base 0xe8000000, size 17, enabled
pcib4: allocated memory range (0xe8000000-0xe801ffff) for rid 10 of pci0:13:0:0
	map[18]: type I/O Port, range 32, base 0x4000, size  5, enabled
pcib4: allocated I/O port range (0x4000-0x401f) for rid 18 of pci0:13:0:0
pcib4: matched entry for 13.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 16
em0: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x4000-0x401f mem 0xe8000000-0xe801ffff irq 16 at device 0.0 on pci13
em0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 49
em0: using IRQ 256 for MSI
em0: Using an MSI interrupt
em0: bpf attached
em0: Ethernet address: 00:30:48:91:d7:08
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pcib0: allocated type 4 (0x5000-0x5fff) for rid 1c of pcib5
pcib0: allocated type 3 (0xe8200000-0xe82fffff) for rid 20 of pcib5
pcib5:   domain            0
pcib5:   secondary bus     14
pcib5:   subordinate bus   14
pcib5:   I/O decode        0x5000-0x5fff
pcib5:   memory decode     0xe8200000-0xe82fffff
pcib5:   no prefetched decode
pci14: <ACPI PCI bus> on pcib5
pci14: domain=0, physical bus=14
found->	vendor=0x8086, dev=0x109a, revid=0x00
	domain=0, bus=14, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 32, base 0xe8200000, size 17, enabled
pcib5: allocated memory range (0xe8200000-0xe821ffff) for rid 10 of pci0:14:0:0
	map[18]: type I/O Port, range 32, base 0x5000, size  5, enabled
pcib5: allocated I/O port range (0x5000-0x501f) for rid 18 of pci0:14:0:0
pcib5: matched entry for 14.0.INTA
pcib5: slot 0 INTA hardwired to IRQ 17
em1: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x5000-0x501f mem 0xe8200000-0xe821ffff irq 17 at device 0.0 on pci14
em1: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 257 to local APIC 0 vector 50
em1: using IRQ 257 for MSI
em1: Using an MSI interrupt
em1: bpf attached
em1: Ethernet address: 00:30:48:91:d7:09
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x3000-0x301f irq 23 at device 29.0 on pci0
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 51
usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0
usbus0: bpf attached
uhci0: usbpf: Attached
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x3020-0x303f irq 19 at device 29.1 on pci0
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 52
usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1
usbus1: bpf attached
uhci1: usbpf: Attached
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x3040-0x305f irq 18 at device 29.2 on pci0
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 53
usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2
usbus2: bpf attached
uhci2: usbpf: Attached
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x3060-0x307f irq 16 at device 29.3 on pci0
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 54
usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3
usbus3: bpf attached
uhci3: usbpf: Attached
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xe8600000-0xe86003ff irq 23 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usbus4: bpf attached
ehci0: usbpf: Attached
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib0: allocated type 4 (0x6000-0x6fff) for rid 1c of pcib6
pcib0: allocated type 3 (0xe8300000-0xe83fffff) for rid 20 of pcib6
pcib0: allocated type 3 (0xe0000000-0xe7ffffff) for rid 24 of pcib6
pcib6:   domain            0
pcib6:   secondary bus     15
pcib6:   subordinate bus   15
pcib6:   I/O decode        0x6000-0x6fff
pcib6:   memory decode     0xe8300000-0xe83fffff
pcib6:   prefetched decode 0xe0000000-0xe7ffffff
pcib6:   Subtractively decoded bridge.
pci15: <ACPI PCI bus> on pcib6
pci15: domain=0, physical bus=15
found->	vendor=0x1002, dev=0x515e, revid=0x02
	domain=0, bus=15, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0387, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=7
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Prefetchable Memory, range 32, base 0xe0000000, size 27, enabled
pcib6: allocated prefetch range (0xe0000000-0xe7ffffff) for rid 10 of pci0:15:0:0
	map[14]: type I/O Port, range 32, base 0x6000, size  8, enabled
pcib6: allocated I/O port range (0x6000-0x60ff) for rid 14 of pci0:15:0:0
	map[18]: type Memory, range 32, base 0xe8300000, size 16, enabled
pcib6: allocated memory range (0xe8300000-0xe830ffff) for rid 18 of pci0:15:0:0
pcib6: matched entry for 15.0.INTA
pcib6: slot 0 INTA hardwired to IRQ 16
vgapci0: <VGA-compatible display> port 0x6000-0x60ff mem 0xe0000000-0xe7ffffff,0xe8300000-0xe830ffff irq 16 at device 0.0 on pci15
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30a0-0x30af at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 55
atapci1: <Intel ICH7 SATA300 controller> port 0x30e8-0x30ef,0x30dc-0x30df,0x30e0-0x30e7,0x30d8-0x30db,0x30b0-0x30bf mem 0xe8600400-0xe86007ff irq 19 at device 31.2 on pci0
atapci1: AHCI called from vendor specific driver
atapci1: AHCI v1.10 controller with 4 3Gbps ports, PM not supported
atapci1: Caps: 64bit NCQ ALP AL CLO 3Gbps PMD SSC PSC 32cmd 4ports
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
ata4: <ATA channel 2> on atapci1
ata5: <ATA channel 3> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 56
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 57
Event timer "i8254" frequency 1193182 Hz quality 100
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 58
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 59
uart0: fast interrupt
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 60
uart1: fast interrupt
acpi0: wakeup code va 0xffffff81a3854000 pa 0x4000
pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
pcib0: allocated type 3 (0xcc000-0xcc7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xcc800-0xccfff) for rid 0 of orm0
pcib0: allocated type 3 (0xcd000-0xcd7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xcd800-0xcdfff) for rid 0 of orm0
pcib0: allocated type 3 (0xce000-0xce7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xce800-0xcefff) for rid 0 of orm0
pcib0: allocated type 3 (0xcf000-0xcf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xcf800-0xcffff) for rid 0 of orm0
pcib0: allocated type 3 (0xd0000-0xd07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xd0800-0xd0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xd1000-0xd17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xd1800-0xd1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xd2000-0xd27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xd2800-0xd2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xd3000-0xd37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xd3800-0xd3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xda000-0xda7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xda800-0xdafff) for rid 0 of orm0
pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 0 of orm0
pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 0 of orm0
pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xdd800-0xddfff) for rid 0 of orm0
pcib0: allocated type 3 (0xde000-0xde7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xde800-0xdefff) for rid 0 of orm0
pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xdf800-0xdffff) for rid 0 of orm0
pcib0: allocated type 3 (0xe0000-0xe07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xe0800-0xe0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xe1000-0xe17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xe1800-0xe1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xe2000-0xe27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xe2800-0xe2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xe3000-0xe37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xe3800-0xe3fff) for rid 0 of orm0
isa_probe_children: disabling PnP devices
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
uart: uart1 already exists; skipping it
isa_probe_children: probing non-PnP devices
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0
pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc0 failed to probe at irq 7 on isa0
isa_probe_children: probing PnP devices
est0: enabling SpeedStep
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr a1a0a1a06000a1a
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr a1a0a1a06000a1a
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 99752007 Hz
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
usbus4: 480Mbps High Speed USB v2.0
ata0: reset tp1 mask=03 ostat0=7f ostat1=50
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=00 stat1=00 devices=0x20000
(aprobe0:ata0:0:1:0): SIGNATURE: eb14
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub0: 2 ports with 2 removable, self powered
ata2: AHCI reset...
ata2: hard reset ...
uhub1: 2 ports with 2 removable, self powered
ata2: SATA connect time=10ms status=00000113
ata2: ready wait time=0ms
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
ata2: software reset port 0...
ata2: ready wait time=0ms
ata2: SIGNATURE: 00000101
ata2: AHCI reset done: devices=00000001
(aprobe0:ata2:0:0:0): SIGNATURE: 0000
ata3: AHCI reset...
ata3: hard reset ...
ata3: SATA connect time=10ms status=00000113
ata3: ready wait time=0ms
ata3: software reset port 0...
ata3: ready wait time=0ms
ata3: SIGNATURE: 00000101
ata3: AHCI reset done: devices=00000001
(aprobe1:ata3:0:0:0): SIGNATURE: 0000
ata4: AHCI reset...
ata4: hard reset ...
ata4: SATA connect time=10ms status=00000113
ata4: ready wait time=0ms
ata4: software reset port 0...
ata4: ready wait time=0ms
ata4: SIGNATURE: 00000101
ata4: AHCI reset done: devices=00000001
(aprobe2:ata4:0:0:0): SIGNATURE: 0000
ata5: AHCI reset...
ata5: hard reset ...
ata5: SATA connect time=10ms status=00000113
ata5: ready wait time=0ms
ata5: software reset port 0...
ata5: ready wait time=0ms
ata5: SIGNATURE: 00000101
ata5: AHCI reset done: devices=00000001
(aprobe0:ata5:0:0:0): SIGNATURE: 0000
pass0 at ata0 bus 0 scbus0 target 1 lun 0
pass0: <TEAC CD-224E-N 1.AA> Removable CD-ROM SCSI-0 device 
pass0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
pass1 at ata2 bus 0 scbus1 target 0 lun 0
pass1: <ST3320620AS 3.AAK> ATA-7 SATA 1.x device
pass1: Serial Number 6QF1VVC0
pass1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
pass2 at ata3 bus 0 scbus2 target 0 lun 0
pass2: <ST3320620AS 3.AAE> ATA-7 SATA 1.x device
pass2: Serial Number 6QF3RPZC
pass2: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
pass3 at ata4 bus 0 scbus3 target 0 lun 0
pass3: <ST3320620AS 3.AAE> ATA-7 SATA 1.x device
pass3: Serial Number 6QF1P8LH
pass3: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
pass4 at ata5 bus 0 scbus4 target 0 lun 0
pass4: <ST3320620AS 3.AAK> ATA-7 SATA 1.x device
pass4: Serial Number 6QF1WN9R
pass4: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
pass0 at ata0 bus 0 scbus0 target 1 lun 0
pass0: <TEAC CD-224E-N 1.AA> Removable CD-ROM SCSI-0 device 
pass0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
pass1 at ata2 bus 0 scbus1 target 0 lun 0
pass1: <ST3320620AS 3.AAK> ATA-7 SATA 1.x device
pass1: Serial Number 6QF1VVC0
pass1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
pass2 at ata3 bus 0 scbus2 target 0 lun 0
pass2: <ST3320620AS 3.AAE> ATA-7 SATA 1.x device
pass2: Serial Number 6QF3RPZC
pass2: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
pass3 at ata4 bus 0 scbus3 target 0 lun 0
pass3: <ST3320620AS 3.AAE> ATA-7 SATA 1.x device
pass3: Serial Number 6QF1P8LH
pass3: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
pass4 at ata5 bus 0 scbus4 target 0 lun 0
pass4: <ST3320620AS 3.AAK> ATA-7 SATA 1.x device
pass4: Serial Number 6QF1WN9R
pass4: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: passed TSC synchronization test
TSC timecounter discards lower 7 bit(s)
Timecounter "TSC-low" frequency 15586249 Hz quality 1000
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Trying to mount root from ufs:/dev/mirror/boota [rw]...
mountroot: waiting for device /dev/mirror/boota ...
Mounting from ufs:/dev/mirror/boota failed with error 19.

Loader variables:
  vfs.root.mountfrom=ufs:/dev/mirror/boota
  vfs.root.mountfrom.options=rw

Manual root filesystem specification:
  <fstype>:<device> [options]
      Mount <device> using filesystem <fstype>
      and with the specified (optional) option list.

    eg. ufs:/dev/da0s1a
        zfs:tank
        cd9660:/dev/acd0 ro
          (which is equivalent to: mount -t cd9660 -o ro /dev/acd0 /)

  ?               List valid disk boot devices
  .               Yield 1 second (for background tasks)
  <empty line>    Abort manual input

mountroot> 
panic: mountroot: unable to (re-)mount root.
cpuid = 1
Uptime: 24s
Automatic reboot in 15 seconds - press a key on the console to abort
Rebooting...