From owner-freebsd-hackers Thu Jul 12 19:42:16 2001 Delivered-To: freebsd-hackers@freebsd.org Received: from cs.rpi.edu (mumble.cs.rpi.edu [128.213.8.16]) by hub.freebsd.org (Postfix) with ESMTP id 7298737B408 for ; Thu, 12 Jul 2001 19:42:08 -0700 (PDT) (envelope-from crossd@cs.rpi.edu) Received: from cs.rpi.edu (monica.cs.rpi.edu [128.213.7.2]) by cs.rpi.edu (8.9.3/8.9.3) with ESMTP id WAA39057 for ; Thu, 12 Jul 2001 22:42:06 -0400 (EDT) Message-Id: <200107130242.WAA39057@cs.rpi.edu> To: freebsd-hackers@freebsd.org Subject: sound on IBM model T22 laptop Date: Thu, 12 Jul 2001 22:42:06 -0400 From: "David E. Cross" Sender: owner-freebsd-hackers@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, sound is not working correctly on this IBM model T22 laptop. Specifically whenever sound plays it is very garbled. I can get it to play almost correctly via either 'ping -f somehost' or 'dd bs=512 if=/dev/zero of=foo.zero' (well, at least until the filesystem fills up ;) the ethernet card is on IRQ 11 (same as the sound chip), but the IDE controller is on the standard IDE IRQ channel... so I am not quite sure if this is an IRQ issue. This is a -STABLE kernel from today. ----- machine i386 cpu I686_CPU ident TTT maxusers 64 options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev device isa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device fd1 at fdc0 drive 1 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives options ATA_STATIC_ID #Static device numbering # SCSI peripherals device scbus # SCSI bus (required) device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? flags 0x20 # Advanced Power Management # PCCARD (PCMCIA) support device card device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000 device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da device miibus # MII bus support device fxp # Intel EtherExpress PRO/100B (82557, 82558) # Pseudo devices - the number indicates how many units to allocate. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif 4 # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device uscanner # Scanners device pcm ---- Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.3-STABLE #0: Thu Jul 12 16:49:15 EDT 2001 root@d113-37.cs.rpi.edu:/usr/obj/usr/src/sys/TTT Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (896.11-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x383f9ff real memory = 268435456 (262144K bytes) avail memory = 257523712 (251488K bytes) Preloaded elf kernel "kernel" at 0xc03a8000. Pentium Pro MTRR support enabled md0: Malloc disk apm0: on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at 0.0 irq 11 pcic-pci0: mem 0x50000000-0x50000fff irq 11 at device 2.0 on pci0 pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq] pcic-pci1: mem 0x50100000-0x50100fff irq 11 at device 2.1 on pci0 pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq] fxp0: port 0x1800-0x183f mem 0xe8100000-0xe811ffff,0xe8120000-0xe8120fff irq 11 at device 3.0 on pci0 fxp0: Ethernet address 00:03:47:7b:a7:65 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: (vendor=0x11c1, dev=0x045c) at 3.1 irq 11 csa0: mem 0xe8000000-0xe80fffff,0xe8122000-0xe8122fff irq 11 at device 5.0 on pci0 pcm0: on csa0 isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0x1850-0x185f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: port 0x1860-0x187f irq 11 at device 7.2 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered chip1: port 0x1040-0x104f at device 7.3 on pci0 orm0: