Date: Wed, 14 Mar 2007 03:48:37 +0100 From: =?iso-8859-1?Q?Jonas_Andr=E9n?= <jonas@tullinge.mine.nu> To: <freebsd-drivers@freebsd.org> Subject: problem with bge nic. Message-ID: <000001c765e3$43c8c080$cb5a4180$@mine.nu>
next in thread | raw e-mail | index | archive | help
Hi,
I have a little problem, I just got a hold of an IBM NetXtreme Broadcom
dualport NIC (5704C).
But I cant get it to work in my freebsd-box, I don=92t actually know if =
it is
supposed to work in a 32-bit pci slot at all but I hope that maybe =
someone
on this mailinglist can clear that up for me :).
I am running FreeBSD 6.2-RELEASE-p2.
I get this message in dmesg:
bge0: <Broadcom BCM5704 B0, ASIC rev. 0x2100> mem 0xdf010000-0xdf01ffff =
irq
16 at device 11.0 on pci2
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xdf010000
bge0: firmware handshake timed out
bge0: firmware handshake timed out
bge0: RX CPU self-diagnostics failed!
bge0: chip initialization failed
device_attach: bge0 attach returned 6
and it doesent even seem to find the second port of the NIC, atleast it
doesent recognice it as an Broadcom device but rather an Ethernet
controller: VSN Systemen BV Unknown device 1648 (rev 10) (prog-if 01).
Can someone bring some light to this problem?
Best Regards,
Jonas Andr=E9n
(below are output from lspci & dmesg)
----------------------------------------------------------------
-------------------[ lspci -vv output ] -------------------
----------------------------------------------------------------
pcilib: 0000:02:0b.1 64-bit device address ignored.
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM
Controller/Host-Hub Interface (rev 03)
Subsystem: Micro-Star International Co., Ltd. Unknown device =
5770
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- =
ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dfast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at d8000000 (32-bit, prefetchable)
Capabilities: [e4] Vendor Specific Information
Capabilities: [a0] AGP version 2.0
Status: RQ=3D32 Iso- ArqSz=3D0 Cal=3D0 SBA+ ITACoh- =
GART64-
HTrans- 64bit- FW+ AGP3- Rate=3Dx1,x2,x4
Command: RQ=3D1 ArqSz=3D0 Cal=3D0 SBA- AGP- GART64- =
64bit- FW-
Rate=3D<none>
00:01.0 PCI bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE
Host-to-AGP Bridge (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- =
ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=3Dfast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=3D00, secondary=3D01, subordinate=3D01, =
sec-latency=3D32
Memory behind bridge: dc000000-ddffffff
Prefetchable memory behind bridge: d0000000-d7ffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=3Dmedium =
>TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. Unknown device =
5770
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- =
ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium =
>TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at d800
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. Unknown device =
5770
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- =
ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium =
>TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d000
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. Unknown device =
5770
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- =
ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium =
>TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d400
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2
EHCI Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Unknown device =
5770
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- =
ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium =
>TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at e0000000 (32-bit, non-prefetchable)
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME-
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 82) (prog-if =
00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- =
ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dfast >TAbort-
<TAbort- <MAbort- >SERR- <PERR+
Latency: 0
Bus: primary=3D00, secondary=3D02, subordinate=3D02, =
sec-latency=3D32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: de000000-dfffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=3Dmedium =
>TAbort-
<TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC
Interface Bridge (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- =
ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium =
>TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller =
(rev
02) (prog-if 8a [Master SecP PriP])
Subsystem: Micro-Star International Co., Ltd. Unknown device =
5770
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- =
ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium =
>TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 255
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at f000
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) =
SMBus
Controller (rev 02)
Subsystem: Micro-Star International Co., Ltd. Unknown device =
5770
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- =
ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium =
>TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 255
Region 4: I/O ports at 0500
01:00.0 VGA compatible controller: nVidia Corporation NV28 [GeForce4 Ti =
4200
AGP 8x] (rev a1) (prog-if 00 [VGA])
Subsystem: ASUSTeK Computer Inc. Unknown device 02cb
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- =
ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=3Dmedium =
>TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dc000000 (32-bit, non-prefetchable)
Region 1: Memory at d0000000 (32-bit, prefetchable)
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME-
Capabilities: [44] AGP version 3.0
Status: RQ=3D32 Iso- ArqSz=3D0 Cal=3D0 SBA+ ITACoh- =
GART64-
HTrans- 64bit- FW+ AGP3- Rate=3Dx1,x2,x4
Command: RQ=3D1 ArqSz=3D0 Cal=3D0 SBA- AGP- GART64- =
64bit- FW-
Rate=3D<none>
02:0a.0 Ethernet controller: D-Link System Inc DGE-528T Gigabit Ethernet
Adapter (rev 10)
Subsystem: D-Link System Inc DGE-528T Gigabit Ethernet Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- =
ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=3Dmedium =
>TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at c000
Region 1: Memory at df020000 (32-bit, non-prefetchable)
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=3D375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME-
02:0b.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 =
Gigabit
Ethernet (rev 10)
Subsystem: Broadcom Corporation NetXtreme BCM5704 Gigabit =
Ethernet
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- =
ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=3Dmedium =
>TAbort-
<TAbort- <MAbort- >SERR- <PERR+
Interrupt: pin ? routed to IRQ 17
Region 0: Memory at df010000 (64-bit, non-prefetchable) =
[disabled]
Capabilities: [40] PCI-X non-bridge device
Command: DPERE- ERO+ RBC=3D512 OST=3D1
Status: Dev=3Dfe:1f.0 64bit+ 133MHz+ SCD- USC- =
DC=3Dsimple
DMMRBC=3D2048 DMOST=3D1 DMCRS=3D16 RSCEM- 266MHz- 533MHz-
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=3D0 DScale=3D1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ =
Queue=3D0/3
Enable-
Address: 0004480d00024c04 Data: 0001
02:0b.1 Ethernet controller: VSN Systemen BV Unknown device 1648 (rev =
10)
(prog-if 01)
Subsystem: VSN Systemen BV Unknown device 1648
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- =
ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=3Dmedium =
>TAbort-
<TAbort- <MAbort- >SERR- <PERR+
Interrupt: pin A routed to IRQ 17
Region 0: Memory at <ignored> (64-bit, non-prefetchable) =
[disabled]
Region 2: Memory at 00000100 (32-bit, non-prefetchable) =
[disabled]
Region 3: Memory at 00000100 (32-bit, non-prefetchable) =
[disabled]
Region 4: Memory at 00000100 (32-bit, non-prefetchable) =
[disabled]
Region 5: Memory at 00000100 (32-bit, non-prefetchable) =
[disabled]
Expansion ROM at <unassigned> [disabled]
Capabilities: [40] PCI-X non-bridge device
Command: DPERE- ERO+ RBC=3D512 OST=3D1
Status: Dev=3Dff:1f.0 64bit+ 133MHz+ SCD- USC- =
DC=3Dsimple
DMMRBC=3D2048 DMOST=3D1 DMCRS=3D16 RSCEM- 266MHz- 533MHz-
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=3D0 DScale=3D1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ =
Queue=3D0/3
Enable-
Address: 0004490d00024d04 Data: 0101
02:0f.0 Ethernet controller: D-Link System Inc DGE-528T Gigabit Ethernet
Adapter (rev 10)
Subsystem: D-Link System Inc DGE-528T Gigabit Ethernet Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- =
ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=3Dmedium =
>TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at c400
Region 1: Memory at df021000 (32-bit, non-prefetchable)
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=3D375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME-
----------------------------------------------------------------
-------------------[DMESG WITH VERBOSE BOOT] -------------------
----------------------------------------------------------------
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights =
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p2 #0: Wed Mar 14 02:49:40 CET 2007
root@goran.home.polisen.org:/usr/obj/usr/src/sys/FIREWALL54
Preloaded elf kernel "/boot/kernel/kernel" at 0xc07d6000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07d614c.
MP Configuration Table version 1.4 found at 0xc00f0c00
Table 'FACP' at 0x3fff3040
Table 'APIC' at 0x3fff6b40
MADT: Found table at 0x3fff6b40
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
MADT: Found CPU APIC ID 1 ACPI ID 1: disabled
ACPI APIC Table: <IntelR AWRDACPI>
Calibrating clock(s) ... i8254 clock: 1193199 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2799521360 Hz
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2799.52-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0xf27 Stepping =3D 7
=20
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA
,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=3D0x4400<CNTX-ID,<b14>>
real memory =3D 1073676288 (1023 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000825000 - 0x000000003eda7fff, 1045966848 bytes (255363 pages)
avail memory =3D 1045884928 (997 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fb4a0
bios32: Entry =3D 0xfb930 (c00fb930) Rev =3D 0 Len =3D 1
pcibios: PCI BIOS entry at 0xf0000+0xb960
pnpbios: Found PnP BIOS data at 0xc00fc360
pnpbios: Entry =3D f0000:c390 Rev =3D 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
wlan: <802.11 Link Layer>
io: <I/O>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
mem: <memory>
Pentium Pro MTRR support enabled
npx0: INT 16 interface
acpi0: <IntelR AWRDACPI> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000090
pci_open(1a): mode1res=3D0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there =
(id=3D25608086)
pcibios: BIOS version 2.10
Found $PIR table, 12 entries at 0xc00fd9c0
PCI-Only Interrupts: 3 5 9 10 11 12
Location Bus Device Pin Link IRQs
slot 1 2 8 A 0x68 3 4 5 7 9 10 11 12 14 15
slot 1 2 8 B 0x69 3 4 5 7 9 10 11 12 14 15
slot 1 2 8 C 0x6a 3 4 5 7 9 10 11 12 14 15
slot 1 2 8 D 0x6b 3 4 5 7 9 10 11 12 14 15
slot 2 2 9 A 0x69 3 4 5 7 9 10 11 12 14 15
slot 2 2 9 B 0x6a 3 4 5 7 9 10 11 12 14 15
slot 2 2 9 C 0x6b 3 4 5 7 9 10 11 12 14 15
slot 2 2 9 D 0x68 3 4 5 7 9 10 11 12 14 15
slot 3 2 10 A 0x6a 3 4 5 7 9 10 11 12 14 15
slot 3 2 10 B 0x6b 3 4 5 7 9 10 11 12 14 15
slot 3 2 10 C 0x68 3 4 5 7 9 10 11 12 14 15
slot 3 2 10 D 0x69 3 4 5 7 9 10 11 12 14 15
slot 4 2 11 A 0x63 3 4 5 7 9 10 11 12 14 15
slot 4 2 11 B 0x60 3 4 5 7 9 10 11 12 14 15
slot 4 2 11 C 0x61 3 4 5 7 9 10 11 12 14 15
slot 4 2 11 D 0x62 3 4 5 7 9 10 11 12 14 15
slot 5 2 14 A 0x61 3 4 5 7 9 10 11 12 14 15
slot 5 2 14 B 0x62 3 4 5 7 9 10 11 12 14 15
slot 5 2 14 C 0x69 3 4 5 7 9 10 11 12 14 15
slot 5 2 14 D 0x6a 3 4 5 7 9 10 11 12 14 15
slot 6 2 15 A 0x62 3 4 5 7 9 10 11 12 14 15
slot 6 2 15 B 0x69 3 4 5 7 9 10 11 12 14 15
slot 6 2 15 C 0x6a 3 4 5 7 9 10 11 12 14 15
slot 6 2 15 D 0x61 3 4 5 7 9 10 11 12 14 15
slot 7 2 12 A 0x6b 3 4 5 7 9 10 11 12 14 15
slot 7 2 12 B 0x68 3 4 5 7 9 10 11 12 14 15
slot 7 2 12 C 0x69 3 4 5 7 9 10 11 12 14 15
slot 7 2 12 D 0x6a 3 4 5 7 9 10 11 12 14 15
slot 8 2 13 A 0x6b 3 4 5 7 9 10 11 12 14 15
slot 8 2 13 B 0x68 3 4 5 7 9 10 11 12 14 15
slot 8 2 13 C 0x69 3 4 5 7 9 10 11 12 14 15
slot 8 2 13 D 0x6a 3 4 5 7 9 10 11 12 14 15
embedded 0 30 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 30 B 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 30 C 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 30 D 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 31 A 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 31 B 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 31 C 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 31 D 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 1 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 1 B 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 1 C 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 1 D 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 29 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 29 B 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 29 C 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 29 D 0x6b 3 4 5 7 9 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xd867e000 pa 0x9d000
ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 7 9 10 11 12 14 15
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 7 9 10 11 12 14 15
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 7 9 10 11 12 14 15
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 7 9 10 11 12 14 15
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11 12 14 15
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11 12 14 15
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 7 9 10 11 12 14 15
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 7 9 10 11 12 14 15
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 12 N 0 3 4 5 7 9 10 11 12 14 15
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 12 N 0 3 4 5 7 9 10 11 12 14 15
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 3 N 0 3 4 5 7 9 10 11 12 14 15
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 3 N 0 3 4 5 7 9 10 11 12 14 15
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=3D0
found-> vendor=3D0x8086, dev=3D0x2560, revid=3D0x03
bus=3D0, slot=3D0, func=3D0
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0006, statreg=3D0x2090, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
map[10]: type 3, range 32, base d8000000, size 26, enabled
found-> vendor=3D0x8086, dev=3D0x2561, revid=3D0x03
bus=3D0, slot=3D1, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
cmdreg=3D0x0107, statreg=3D0x00a0, cachelnsz=3D0 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x0c (3000 ns), =
maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x24c2, revid=3D0x02
bus=3D0, slot=3D29, func=3D0
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
intpin=3Da, irq=3D255
map[20]: type 4, range 32, base 0000d800, size 5, enabled
found-> vendor=3D0x8086, dev=3D0x24c4, revid=3D0x02
bus=3D0, slot=3D29, func=3D1
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
intpin=3Db, irq=3D255
map[20]: type 4, range 32, base 0000d000, size 5, enabled
found-> vendor=3D0x8086, dev=3D0x24c7, revid=3D0x02
bus=3D0, slot=3D29, func=3D2
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
intpin=3Dc, irq=3D255
map[20]: type 4, range 32, base 0000d400, size 5, enabled
found-> vendor=3D0x8086, dev=3D0x24cd, revid=3D0x02
bus=3D0, slot=3D29, func=3D7
class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0006, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
intpin=3Dd, irq=3D255
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base e0000000, size 10, enabled
found-> vendor=3D0x8086, dev=3D0x244e, revid=3D0x82
bus=3D0, slot=3D30, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
cmdreg=3D0x0107, statreg=3D0x8080, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x06 (1500 ns), maxlat=3D0x00 =
(0 ns)
found-> vendor=3D0x8086, dev=3D0x24c0, revid=3D0x02
bus=3D0, slot=3D31, func=3D0
class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x000f, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
found-> vendor=3D0x8086, dev=3D0x24cb, revid=3D0x02
bus=3D0, slot=3D31, func=3D1
class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
intpin=3Da, irq=3D255
map[20]: type 4, range 32, base 0000f000, size 4, enabled
map[24]: type 1, range 32, base 00000000, size 10, enabled
found-> vendor=3D0x8086, dev=3D0x24c3, revid=3D0x02
bus=3D0, slot=3D31, func=3D3
class=3D0c-05-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0001, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
intpin=3Db, irq=3D255
map[20]: type 4, range 32, base 00000500, size 5, enabled
agp0: <Intel 82845G host to AGP bridge> mem 0xd8000000-0xdbffffff at =
device
0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xd8000000
agp0: allocating GATT for aperture of size 64M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xdc000000-0xddffffff
pcib1: prefetched decode 0xd0000000-0xd7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=3D1
found-> vendor=3D0x10de, dev=3D0x0281, revid=3D0xa1
bus=3D1, slot=3D0, func=3D0
class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x02b0, cachelnsz=3D0 (dwords)
lattimer=3D0x20 (960 ns), mingnt=3D0x05 (1250 ns), maxlat=3D0x01 =
(250 ns)
intpin=3Da, irq=3D5
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base dc000000, size 24, enabled
pcib1: (null) requested memory range 0xdc000000-0xdcffffff: good
map[14]: type 3, range 32, base d0000000, size 27, enabled
pcib1: (null) requested memory range 0xd0000000-0xd7ffffff: good
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
pcib1: slot 0 INTA is routed to irq 16
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xd800-0xd81f at
device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd800
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xd000-0xd01f at
device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd000
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 50
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xd400-0xd41f at
device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd400
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem
0xe0000000-0xe00003ff at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xe0000000
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 23
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 52
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xc000-0xcfff
pcib2: memory decode 0xde000000-0xdfffffff
pcib2: prefetched decode 0xfff00000-0xfffff
pcib2: Subtractively decoded bridge.
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=3D2
found-> vendor=3D0x1186, dev=3D0x4300, revid=3D0x10
bus=3D2, slot=3D10, func=3D0
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x02b0, cachelnsz=3D8 (dwords)
lattimer=3D0x20 (960 ns), mingnt=3D0x20 (8000 ns), maxlat=3D0x40 =
(16000
ns)
intpin=3Da, irq=3D12
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000c000, size 8, enabled
pcib2: (null) requested I/O range 0xc000-0xc0ff: in range
map[14]: type 1, range 32, base df020000, size 8, enabled
pcib2: (null) requested memory range 0xdf020000-0xdf0200ff: good
pcib2: matched entry for 2.10.INTA
pcib2: slot 10 INTA hardwired to IRQ 22
found-> vendor=3D0x14e4, dev=3D0x1648, revid=3D0x10
bus=3D2, slot=3D11, func=3D0
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x82b0, cachelnsz=3D8 (dwords)
lattimer=3D0x20 (960 ns), mingnt=3D0x40 (16000 ns), =
maxlat=3D0x00 (0 ns)
intpin=3Db, irq=3D10
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type 1, range 64, base df010000, size 16, enabled
pcib2: (null) requested memory range 0xdf010000-0xdf01ffff: good
pcib2: matched entry for 2.11.INTB
pcib2: slot 11 INTB hardwired to IRQ 16
found-> vendor=3D0x15e4, dev=3D0x1648, revid=3D0x10
bus=3D2, slot=3D11, func=3D1
class=3D02-00-01, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0106, statreg=3D0x82b0, cachelnsz=3D8 (dwords)
lattimer=3D0x21 (990 ns), mingnt=3D0x40 (16000 ns), =
maxlat=3D0x00 (0 ns)
intpin=3Dc, irq=3D16
map[10]: type 1, range 64, base df010100, size 8, enabled
pcib2: (null) requested memory range 0xdf010100-0xdf0101ff: good
map[18]: type 1, range 32, base 00000100, size 8, enabled
map[1c]: type 1, range 32, base 00000100, size 8, enabled
map[20]: type 1, range 32, base 00000100, size 8, enabled
map[24]: type 1, range 32, base 00000100, size 8, enabled
pcib2: matched entry for 2.11.INTC
pcib2: slot 11 INTC hardwired to IRQ 17
found-> vendor=3D0x1186, dev=3D0x4300, revid=3D0x10
bus=3D2, slot=3D15, func=3D0
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x02b0, cachelnsz=3D8 (dwords)
lattimer=3D0x20 (960 ns), mingnt=3D0x20 (8000 ns), maxlat=3D0x40 =
(16000
ns)
intpin=3Da, irq=3D11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000c400, size 8, enabled
pcib2: (null) requested I/O range 0xc400-0xc4ff: in range
map[14]: type 1, range 32, base df021000, size 8, enabled
pcib2: (null) requested memory range 0xdf021000-0xdf0210ff: good
pcib2: matched entry for 2.15.INTA
pcib2: slot 15 INTA hardwired to IRQ 18
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc000
pcib2: re0 requested I/O range 0xc000-0xc0ff: in range
re0: <D-Link DGE-528(T) Gigabit Ethernet Adapter> port 0xc000-0xc0ff mem
0xdf020000-0xdf0200ff irq 22 at device 10.0 on pci2
pcib2: re0 requested I/O range 0xc000-0xc0ff: in range
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
re0: bpf attached
re0: Ethernet address: 00:11:95:5f:df:4f
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 53
re0: [MPSAFE]
re0: [FAST]
bge0: <Broadcom BCM5704 B0, ASIC rev. 0x2100> mem 0xdf010000-0xdf01ffff =
irq
16 at device 11.0 on pci2
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xdf010000
bge0: firmware handshake timed out
bge0: firmware handshake timed out
bge0: RX CPU self-diagnostics failed!
bge0: chip initialization failed
device_attach: bge0 attach returned 6
pci2: <network, ethernet> at device 11.1 (no driver attached)
re1: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc400
pcib2: re1 requested I/O range 0xc400-0xc4ff: in range
re1: <D-Link DGE-528(T) Gigabit Ethernet Adapter> port 0xc400-0xc4ff mem
0xdf021000-0xdf0210ff irq 18 at device 15.0 on pci2
pcib2: re1 requested I/O range 0xc400-0xc4ff: in range
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S media interface> on miibus1
rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
re1: bpf attached
re1: Ethernet address: 00:11:95:5f:df:56
re1: [MPSAFE]
re1: [FAST]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata0: stat0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata0: stat1=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata0: reset tp2 stat0=3D50 stat1=3D50 =
devices=3D0x3<ATA_SLAVE,ATA_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 54
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D52
ata1: stat0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata1: stat1=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata1: reset tp2 stat0=3D50 stat1=3D50 =
devices=3D0x3<ATA_SLAVE,ATA_MASTER>
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 55
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
sio0: irq maps: 0xdc29 0xdc39 0xdc29 0xdc29
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 56
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 57
atkbd0: [GIANT-LOCKED]
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0xdc29 0xdc29 0xdc29 0xdc29
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =
isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 66655139 hz
Timecounter "TSC" frequency 2799521360 Hz quality 800
Timecounters tick every 1.000 msec
pfsync0: bpf attached
lo0: bpf attached
pflog0: bpf attached
ata0-slave: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA100 cable=3D80 wire
ata0-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA100 cable=3D80 wire
ad0: setting PIO4 on ICH4 chip
ad0: setting UDMA100 on ICH4 chip
ad0: 78533MB <IC35L080AVVA07 0 VA4OA52A> at ata0-master UDMA100
ad0: 160836480 sectors [159560C/16H/63S] 16 sectors/interrupt 1 depth =
queue
GEOM: new disk ad0
ad1: setting PIO4 on ICH4 chip
ad1: setting UDMA100 on ICH4 chip
ad1: 238475MB <HDS722525VLAT80 V36OA6MA> at ata0-slave UDMA100
ad1: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth =
queue
ata1-slave: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA100 cable=3D80 wire
ata1-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA100 cable=3D80 wire
ad2: setting PIO4 on ICH4 chip
ad2: setting UDMA100 on ICH4 chip
ad2: 238475MB <HDS722525VLAT80 V36OA6MA> at ata1-master UDMA100
ad2: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth =
queue
ad3: setting PIO4 on ICH4 chip
ad3: setting UDMA100 on ICH4 chip
ad3: 238475MB <HDS722525VLAT80 V36OA6MA> at ata1-slave UDMA100
ad3: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth =
queue
GEOM: new disk ad1
GEOM: new disk ad2
GEOM: new disk ad3
Trying to mount root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
re0: link state changed to UP
Linux ELF exec handler installed
re1: link state changed to UP
splash: image decoder found: daemon_saver
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000001c765e3$43c8c080$cb5a4180$>