Date: Sat, 27 Apr 2013 08:29:04 -0700 From: Dennis Glatting <freebsd@pki2.com> To: freebsd-questions@freebsd.org Subject: SMP boot differences between 8.4 and 9.1? Message-ID: <1367076544.10478.8.camel@btw.pki2.com>
next in thread | raw e-mail | index | archive | help
I have two four socket Opteron 6200 motherboards with populated 16-core
Opteron 6200 series processors. Onw is Tyan (below) and the other
Supermicro.
When booted under 8.4 only two sockets are recognized but four under
9.1. Is this expected behavior?
dmesg from 8.4:
mc# cat /var/run/dmesg.boot
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.4-PRERELEASE #0 r249529: Mon Apr 15 19:26:38 PDT 2013
root@mc:/disk-2/obj/disk-1/src/sys/SMUNI.RELENG_8 amd64
gcc version 4.2.1 20070831 patched [FreeBSD]
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Opteron(TM) Processor 6274 (2200.04-MHz
K8-class CPU)
Origin = "AuthenticAMD" Id = 0x600f12 Family = 15 Model = 1
Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x1e98220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD
Features2=0x1c9bfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,NodeId,Topology,<b23>,<b24>>
TSC: P-state invariant
real memory = 137438953472 (131072 MB)
avail memory = 132427870208 (126293 MB)
ACPI APIC Table: <120911 APIC1027>
FreeBSD/SMP: Multiprocessor System Detected: 32 CPUs
FreeBSD/SMP: 2 package(s) x 16 core(s)
cpu0 (BSP): APIC ID: 32
cpu1 (AP): APIC ID: 33
cpu2 (AP): APIC ID: 34
cpu3 (AP): APIC ID: 35
cpu4 (AP): APIC ID: 36
cpu5 (AP): APIC ID: 37
cpu6 (AP): APIC ID: 38
cpu7 (AP): APIC ID: 39
cpu8 (AP): APIC ID: 40
cpu9 (AP): APIC ID: 41
cpu10 (AP): APIC ID: 42
cpu11 (AP): APIC ID: 43
cpu12 (AP): APIC ID: 44
cpu13 (AP): APIC ID: 45
cpu14 (AP): APIC ID: 46
cpu15 (AP): APIC ID: 47
cpu16 (AP): APIC ID: 64
cpu17 (AP): APIC ID: 65
cpu18 (AP): APIC ID: 66
cpu19 (AP): APIC ID: 67
cpu20 (AP): APIC ID: 68
cpu21 (AP): APIC ID: 69
cpu22 (AP): APIC ID: 70
cpu23 (AP): APIC ID: 71
cpu24 (AP): APIC ID: 72
cpu25 (AP): APIC ID: 73
cpu26 (AP): APIC ID: 74
cpu27 (AP): APIC ID: 75
cpu28 (AP): APIC ID: 76
cpu29 (AP): APIC ID: 77
cpu30 (AP): APIC ID: 78
cpu31 (AP): APIC ID: 79
cpu (AP): APIC ID: 96 (disabled)
cpu (AP): APIC ID: 97 (disabled)
cpu (AP): APIC ID: 98 (disabled)
cpu (AP): APIC ID: 99 (disabled)
cpu (AP): APIC ID: 100 (disabled)
cpu (AP): APIC ID: 101 (disabled)
cpu (AP): APIC ID: 102 (disabled)
cpu (AP): APIC ID: 103 (disabled)
cpu (AP): APIC ID: 104 (disabled)
cpu (AP): APIC ID: 105 (disabled)
cpu (AP): APIC ID: 106 (disabled)
cpu (AP): APIC ID: 107 (disabled)
cpu (AP): APIC ID: 108 (disabled)
cpu (AP): APIC ID: 109 (disabled)
cpu (AP): APIC ID: 110 (disabled)
cpu (AP): APIC ID: 111 (disabled)
cpu (AP): APIC ID: 128 (disabled)
cpu (AP): APIC ID: 129 (disabled)
cpu (AP): APIC ID: 130 (disabled)
cpu (AP): APIC ID: 131 (disabled)
cpu (AP): APIC ID: 132 (disabled)
cpu (AP): APIC ID: 133 (disabled)
cpu (AP): APIC ID: 134 (disabled)
cpu (AP): APIC ID: 135 (disabled)
cpu (AP): APIC ID: 136 (disabled)
cpu (AP): APIC ID: 137 (disabled)
cpu (AP): APIC ID: 138 (disabled)
cpu (AP): APIC ID: 139 (disabled)
cpu (AP): APIC ID: 140 (disabled)
cpu (AP): APIC ID: 141 (disabled)
cpu (AP): APIC ID: 142 (disabled)
cpu (AP): APIC ID: 143 (disabled)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length:
0x0000000000000000/0x1 (20101013/tbfadt-655)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
ioapic1 <Version 2.1> irqs 24-55 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS> on motherboard
acpi0: <120911 XSDT1027> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of fec00000, 1000 (3) failed
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of ffb80000, 80000 (3) failed
acpi0: reservation of fec10000, 20 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, dff00000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
cpu12: <ACPI CPU> on acpi0
cpu13: <ACPI CPU> on acpi0
cpu14: <ACPI CPU> on acpi0
cpu15: <ACPI CPU> on acpi0
cpu16: <ACPI CPU> on acpi0
cpu17: <ACPI CPU> on acpi0
cpu18: <ACPI CPU> on acpi0
cpu19: <ACPI CPU> on acpi0
cpu20: <ACPI CPU> on acpi0
cpu21: <ACPI CPU> on acpi0
cpu22: <ACPI CPU> on acpi0
cpu23: <ACPI CPU> on acpi0
cpu24: <ACPI CPU> on acpi0
cpu25: <ACPI CPU> on acpi0
cpu26: <ACPI CPU> on acpi0
cpu27: <ACPI CPU> on acpi0
cpu28: <ACPI CPU> on acpi0
cpu29: <ACPI CPU> on acpi0
cpu30: <ACPI CPU> on acpi0
cpu31: <ACPI CPU> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0
pci5: <ACPI PCI bus> on pcib1
igb0: <Intel(R) PRO/1000 Network Connection version - 2.3.9 - 8> port
0xe400-0xe41f mem
0xfeb60000-0xfeb7ffff,0xfeb40000-0xfeb5ffff,0xfeb1c000-0xfeb1ffff irq 44
at device 0.0 on pci5
igb0: Using MSIX interrupts with 9 vectors
igb0: Ethernet address: 00:e0:81:c8:ee:8a
igb0: [ITHREAD]
igb0: Bound queue 0 to cpu 0
igb0: [ITHREAD]
igb0: Bound queue 1 to cpu 1
igb0: [ITHREAD]
igb0: Bound queue 2 to cpu 2
igb0: [ITHREAD]
igb0: Bound queue 3 to cpu 3
igb0: [ITHREAD]
igb0: Bound queue 4 to cpu 4
igb0: [ITHREAD]
igb0: Bound queue 5 to cpu 5
igb0: [ITHREAD]
igb0: Bound queue 6 to cpu 6
igb0: [ITHREAD]
igb0: Bound queue 7 to cpu 7
igb0: [ITHREAD]
igb1: <Intel(R) PRO/1000 Network Connection version - 2.3.9 - 8> port
0xe800-0xe81f mem
0xfebe0000-0xfebfffff,0xfebc0000-0xfebdffff,0xfeb9c000-0xfeb9ffff irq 45
at device 0.1 on pci5
igb1: Using MSIX interrupts with 9 vectors
igb1: Ethernet address: 00:e0:81:c8:ee:8b
igb1: [ITHREAD]
igb1: Bound queue 0 to cpu 8
igb1: [ITHREAD]
igb1: Bound queue 1 to cpu 9
igb1: [ITHREAD]
igb1: Bound queue 2 to cpu 10
igb1: [ITHREAD]
igb1: Bound queue 3 to cpu 11
igb1: [ITHREAD]
igb1: Bound queue 4 to cpu 12
igb1: [ITHREAD]
igb1: Bound queue 5 to cpu 13
igb1: [ITHREAD]
igb1: Bound queue 6 to cpu 14
igb1: [ITHREAD]
igb1: Bound queue 7 to cpu 15
igb1: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 53 at device 9.0 on pci0
pci4: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection 7.3.7> port 0xd800-0xd81f mem
0xfeae0000-0xfeafffff,0xfeadc000-0xfeadffff irq 48 at device 0.0 on pci4
em0: Using MSIX interrupts with 3 vectors
em0: [ITHREAD]
em0: [ITHREAD]
em0: [ITHREAD]
em0: Ethernet address: 00:e0:81:c8:ee:ff
pcib3: <ACPI PCI-PCI bridge> irq 54 at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
mps0: <LSI SAS2008> port 0xc000-0xc0ff mem
0xfe93c000-0xfe93ffff,0xfe940000-0xfe97ffff irq 32 at device 0.0 on pci3
mps0: Firmware: 15.00.00.00, Driver: 14.00.00.01-fbsd
mps0: IOCCapabilities:
1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
mps0: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> irq 54 at device 13.0 on pci0
pci2: <ACPI PCI bus> on pcib4
mps1: <LSI SAS2008> port 0xb000-0xb0ff mem
0xfe83c000-0xfe83ffff,0xfe840000-0xfe87ffff irq 40 at device 0.0 on pci2
mps1: Firmware: 15.00.00.00, Driver: 14.00.00.01-fbsd
mps1: IOCCapabilities:
185c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,IR>
mps1: [ITHREAD]
ahci0: <ATI IXP800 AHCI SATA controller> port
0x9000-0x9007,0x8000-0x8003,0x7000-0x7007,0x6000-0x6003,0x5000-0x500f
mem 0xfdefe400-0xfdefe7ff irq 22 at device 17.0 on pci0
ahci0: [ITHREAD]
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [ITHREAD]
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: [ITHREAD]
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: [ITHREAD]
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: [ITHREAD]
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfdefa000-0xfdefafff
irq 16 at device 18.0 on pci0
ohci0: [ITHREAD]
usbus0 on ohci0
ohci1: <OHCI (generic) USB controller> mem 0xfdefb000-0xfdefbfff irq 16
at device 18.1 on pci0
ohci1: [ITHREAD]
usbus1 on ohci1
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem
0xfdefe800-0xfdefe8ff irq 17 at device 18.2 on pci0
ehci0: [ITHREAD]
usbus2: EHCI version 1.0
usbus2 on ehci0
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfdefc000-0xfdefcfff
irq 18 at device 19.0 on pci0
ohci2: [ITHREAD]
usbus3 on ohci2
ohci3: <OHCI (generic) USB controller> mem 0xfdefd000-0xfdefdfff irq 18
at device 19.1 on pci0
ohci3: [ITHREAD]
usbus4 on ohci3
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem
0xfdefec00-0xfdefecff irq 19 at device 19.2 on pci0
ehci1: [ITHREAD]
usbus5: EHCI version 1.0
usbus5 on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP700/800 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata0: [ITHREAD]
ata1: <ATA channel> at channel 1 on atapci0
ata1: [ITHREAD]
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci1: <ACPI PCI bus> on pcib5
vgapci0: <VGA-compatible display> port 0xa800-0xa87f mem
0xfe000000-0xfe7fffff,0xfdfe0000-0xfdffffff irq 23 at device 9.0 on pci1
ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfdeff000-0xfdefffff
irq 18 at device 20.5 on pci0
ohci4: [ITHREAD]
usbus6 on ohci4
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <Non-standard ns8250 class UART with FIFOs> port 0x2f8-0x2ff irq
3 on acpi0
uart1: [FILTER]
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acpi_hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
device_attach: acpi_hpet1 attach returned 12
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: CGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff on
isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
acpi_throttle0: <ACPI CPU Throttling> on cpu0
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
usbus6: 12Mbps Full Speed USB v1.0
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <ATI> at usbus3
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <ATI> at usbus4
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <ATI> at usbus5
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ugen6.1: <ATI> at usbus6
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub6: 2 ports with 2 removable, self powered
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
uhub3: 3 ports with 3 removable, self powered
uhub4: 3 ports with 3 removable, self powered
(probe255:mps1:0:0:0): REPORT LUNS. CDB: a0 0 0 0 0 0 0 0 0 10 0 0
(probe255:mps1:0:0:0): CAM status: SCSI Status Error
(probe255:mps1:0:0:0): SCSI status: Check Condition
(probe255:mps1:0:0:0): SCSI sense: ILLEGAL REQUEST info?:20b18d
csi:8c,4c,3,c0 asc:20,0 (Invalid command operation code)
(probe255:mps1:0:0:0): REPORT LUNS. CDB: a0 0 0 0 0 0 0 0 0 10 0 0
(probe255:mps1:0:0:0): CAM status: SCSI Status Error
(probe255:mps1:0:0:0): SCSI status: Check Condition
(probe255:mps1:0:0:0): SCSI sense: ILLEGAL REQUEST info?:14203334
csi:33,35,38,39 asc:20,0 (Invalid command operation code) field
replaceable unit: 38
da0 at mps0 bus 0 scbus0 target 3 lun 0
da0: <ATA M4-CT256M4SSD2 000F> Fixed Direct Access SCSI-6 device
da0: 600.000MB/s transfers
da0: Command Queueing enabled
da0: 244198MB (500118192 512 byte sectors: 255H 63S/T 31130C)
da1 at mps0 bus 0 scbus0 target 5 lun 0
da1: <ATA WDC WD2500HHTZ-0 6A00> Fixed Direct Access SCSI-6 device
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C)
da6 at mps0 bus 0 scbus0 target 11 lun 0
da6: <ATA ST3000DM001-1CH1 CC43> Fixed Direct Access SCSI-6 device
da6: 600.000MB/s transfers
da6: Command Queueing enabled
da6: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
da8 at mps1 bus 0 scbus1 target 0 lun 0
da8: <LSI Logical Volume 3000> Fixed Direct Access SCSI-6 device
da8: 150.000MB/s transfers
da8: Command Queueing enabled
da8: 68664MB (140623872 512 byte sectors: 255H 63S/T 8753C)
da7 at mps0 bus 0 scbus0 target 12 lun 0
da7: <ATA ST3000DM001-9YN1 CC4B> Fixed Direct Access SCSI-6 device
da7: 600.000MB/s transfers
da7: Command Queueing enabled
da7: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
da3 at mps0 bus 0 scbus0 target 7 lun 0
da3: <ATA ST3000DM001-9YN1 CC4B> Fixed Direct Access SCSI-6 device
da3: 600.000MB/s transfers
da3: Command Queueing enabled
da3: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
da4 at mps0 bus 0 scbus0 target 8 lun 0
da4: <ATA ST3000DM001-9YN1 CC4B> Fixed Direct Access SCSI-6 device
da4: 600.000MB/s transfers
da4: Command Queueing enabled
da4: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
da5 at mps0 bus 0 scbus0 target 10 lun 0
da5: <ATA ST3000DM001-1CH1 CC43> Fixed Direct Access SCSI-6 device
da5: 600.000MB/s transfers
da5: Command Queueing enabled
da5: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
da2 at mps0 bus 0 scbus0 target 6 lun 0
da2: <ATA ST3000DM001-9YN1 CC4B> Fixed Direct Access SCSI-6 device
da2: 600.000MB/s transfers
da2: Command Queueing enabled
da2: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
SMP: AP CPU #1 Launched!
da10 at mps1 bus 0 scbus1 target 13 lun 0SMP: AP CPU #11 Launched!
da10:
<ATA ST3000DM001-1CH1 CC24> Fixed Direct Access SCSI-6 device
da10: 600.000MB/s transfers
da10: Command Queueing enabled
da10: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)SMP: AP
CPU #4 Launched!
cd0 at ahcich0 bus 0 scbus2 target 0 lun 0
cd0: <HL-DT-ST BD-RE BH10LS30 1.00> Removable CD-ROM SCSI-0 device
cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO
8192bytes)SMP: AP CPU #14 Launched!
cd0: Attempt to query device size failed: NOT READY, Medium not present
- tray closed
da9 at mps1 bus 0 scbus1 target 12 lun 0SMP: AP CPU #3 Launched!
da9:
<ATA ST3000DM001-1CH1 CC24> Fixed Direct Access SCSI-6 device
da9: 600.000MB/s transfers
da9: Command Queueing enabled
da9: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)SMP: AP
CPU #6 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #21 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #23 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #13 Launched!
SMP: AP CPU #18 Launched!
SMP: AP CPU #16 Launched!
SMP: AP CPU #19 Launched!
SMP: AP CPU #22 Launched!
SMP: AP CPU #12 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #15 Launched!
SMP: AP CPU #17 Launched!
SMP: AP CPU #20 Launched!
SMP: AP CPU #26 Launched!
SMP: AP CPU #31 Launched!
SMP: AP CPU #27 Launched!
SMP: AP CPU #24 Launched!
SMP: AP CPU #28 Launched!
SMP: AP CPU #25 Launched!
SMP: AP CPU #29 Launched!
SMP: AP CPU #30 Launched!
Root mount waiting for: usbus5 usbus2
Root mount waiting for: usbus5 usbus2
uhub2: 6 ports with 6 removable, self powered
uhub5: 6 ports with 6 removable, self powered
ugen5.2: <American Megatrends Inc.> at usbus5
uhub7: <Hub Interface> on usbus5
Root mount waiting for: usbus5
uhub7: 3 ports with 3 removable, self powered
Root mount waiting for: usbus5
ugen5.3: <American Megatrends Inc.> at usbus5
ukbd0: <Keyboard Interface> on usbus5
kbd2 at ukbd0
ums0: <Mouse Interface> on usbus5
ums0: 3 buttons and [Z] coordinates ID=0
Trying to mount root from ufs:/dev/gpt/disk0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1367076544.10478.8.camel>