Date: Sat, 25 Feb 2012 22:14:33 +0100 From: Polytropon <freebsd@edvax.de> To: FreeBSD Questions <freebsd-questions@freebsd.org> Subject: Installing Samsung CLX-2160 color laser printer on USB using CUPS Message-ID: <20120225221433.cba3d0dd.freebsd@edvax.de>
next in thread | raw e-mail | index | archive | help
I have a problem installing a Samsung CLX-2160 color laser printer using CUPS. In the http://localhost:631 web-based configuration, none of the methods that are supposed to be used for installing a printer works. The "Add Printer" button leads to this: Add Printer ----------- Local Printers: Discovered Network Printers: Other Network Printers: o Internet Printing Protocol (http) o Internet Printing Protocol (ipp) o LPD/LPR Host or Printer o AppSocket/HP JetDirect [ Continue ] No local printers can be selected (even though the printer is connected, switched on and woken up). And "Find New Printers" shows this: Available Printers ------------------ No printers found. Excellent auto detection. :-) The corresponding device for the printer is this: ulpt0: <Samsung Electronics Co., Ltd. CLX-216x Series, class 0/0, rev 2.00/1.00, addr 2> on usbus4 ulpt0: using bi-directional mode ugen4.2: <CLX-216x Series Samsung Electronics Co., Ltd.> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON crw-rw---- 1 root cups 0, 142 Feb 25 21:42 /dev/ulpt0 I have installed all packages I can imagine: cups-1.4.6 cups-base-1.4.6_6 cups-client-1.4.6 cups-image-1.4.6 cups-pstoraster-8.15.4_6 gutenprint-cups-5.2.4_2 foo2zjs-20110609 foomatic-db-20090530_2 foomatic-db-engine-4.0.7,2 gutenprint-foomatic-5.2.4_2 foo2zjs-20110609 I also have the CLX-216xsplc.ppd PPD file available which I think I'd like to hand over to CUPS somewhere. ALTERNATIVE: If someone could explain how it's easier to make a lpr filter (for the system's printer service), I'd also appreciate this. I've already tried this: # foo2xqx-wrapper cupstest.ps > cupstest.xqx # cat cupstest.xqx > /dev/ulpt0 It causes the LED of the printer to blink, but nothing is printed, even though the printer startes to make sounds (involving the print mechanism, but not the sheet feeder). If I use # foo2qpdl-wrapper cupstest.ps > cupstest.xqx # cat cupstest.xqx > /dev/ulpt0 the CUPS test page is printed, but not in color (only b/w). After looking into the manpage, # foo2qpdl-wrapper -p 2 -c cupstest.ps > cupstest.xqx # cat cupstest.xqx > /dev/ulpt0 makes the printer print properly. Okay, it works. How am I supposed to use a PPD file with CUPS when no local printer is shown? I "need" CUPS (or at least my programs seem to think that), how should it be done? Okay, I could make a simple printer filter. I could then integrate that with /etc/printcap (as I do with my PCL HP Laserjet 4000d). I think it should be possible to code that similar to a parallel printer (with ulpt instead of lpt device specification for the lp= parameter... What am I doing wrong? :-) -- Polytropon Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ...
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20120225221433.cba3d0dd.freebsd>