Date: Thu, 7 Nov 2013 10:36:20 +0100 From: Polytropon <freebsd@edvax.de> To: <mongkonwit_phu@winner.co.th> Cc: freebsd-questions@freebsd.org Subject: Re: i have some problem Message-ID: <20131107103620.7b18f934.freebsd@edvax.de> In-Reply-To: <20131107072833.d3a0d2ef@mail.winner.co.th> References: <20131107072833.d3a0d2ef@mail.winner.co.th>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 07 Nov 2013 14:28:33 +0700, mongkonwit_phu@winner.co.th wrote: > we use smartctl -a /dev/da0 > but can not check HDD so i would like to know about problem. > > Detail of smartctl 6.0 > [...] > Device does not support SMART > > Error Counter logging not supported > Device does not support Self Test logging The answer is right here: The device you're querying does not have S.M.A.R.T. support. The reason might be: > we use raid card is pile 2008 setup raid 10 The disk device da0 is part of a RAID configuration, it does not directly correspond to a disk. Only a "physical disk" can be addressed with smartctl. Your options: 1. Make the PIKE 2008 controller "hand the disk through", removing it from the RAID configuration. 2. Attach the disk to a direct connection. You won't be able to run smartctl diagnostics otherwise as this requires a "more direct access" than the RAID controller can offer. -- Polytropon Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ...
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20131107103620.7b18f934.freebsd>