Date: Thu, 07 Dec 95 22:58:40 -0800 From: "David A. Richards" <drichard@sembilan.uchsc.edu> To: questions@freebsd.org Subject: Kernel compile & strange error Message-ID: <2CC890E06FB@king.dcb.du.edu>
next in thread | raw e-mail | index | archive | help
I have been having major problems with FreeBSD trying to compile my own kernel. I've installed everything clean and from scratch. I havent messed around with any directories, files, trees, etc. Here's what I do: 1) install from scratch Release 2.1.0 bin and kernel source tree 2) copy and configure MYKERNEL 3) cd ../../compile/MYKERNEL 4) type 'make' and everything seems to go fine for a long time 5) then I get an error: (the very end of compile-time messaging) DELAY=15 -DCOMPAT_43 -DPROCFS -DCD9660 -DMSDOSFS -DFFS -DINET cc -O -W -Wreturn-type -Wcomment -Wredundant-decls -Wimplicit -nostdinc -I. -I. /.. -I../../sys -I/usr/include -DMYKERNEL -DI486_CPU -DBOUNCE_BUFFERS -DSCSI_DE LAY=15 -DCOMPAT_43 -DPROCFS -DCD9660 -DMSDOSFS -DFFS -DINET -DKERNEL -Di386 -DLO AD_ADDRESS=0xF0100000 -c vers.c loading kernel kern_sysctl.o: Undefined symbol `_hw_float' referenced from text segment *** Error code 1 Stop. bash# ..please help! drichard@sembilan.uchsc.edu .here's my kernel config file: =-=-=-=-BEGIN FILE=-=-=-=-= # # MYKERNEL -- custom kernel for FreeBSD # # $Id: GENERIC,v 1.46.2.6 1995/10/25 17:29:51 jkh Exp $ # machine "i386" #cpu "I386_CPU" cpu "I486_CPU" #cpu "I586_CPU" ident MYKERNEL maxusers 10 #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem #options NFS #Network Filesystem options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 options "SCSI_DELAY=15" #Be pessimistic about Joe SCSI device options BOUNCE_BUFFERS #include support for DMA bounce buffers #options UCONSOLE #Allow users to grab the console #options SYSVSHM #options SYSVSEM #options SYSVMSG config kernel root on wd0 controller isa0 #controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 #disk fd1 at fdc0 drive 1 #tape ft0 at fdc0 drive 2 controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 #controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr #disk wd2 at wdc1 drive 0 #disk wd3 at wdc1 drive 1 #options ATAPI #Enable ATAPI support for IDE bus #device wcd0 #IDE CD-ROM #controller ncr0 #controller ahc0 #controller bt0 at isa? port "IO_BT0" bio irq ? vector btintr #controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr #controller ahc1 at isa? bio irq ? vector ahcintr #controller ahb0 at isa? bio irq ? vector ahbintr controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr controller aic0 at isa? port 0x340 bio irq 11 vector aicintr #controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr #controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr #controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr controller scbus0 device sd0 device st0 device cd0 #Only need one of these, the code dynamically grows #device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr #device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr #device mcd1 at isa? port 0x340 bio irq 11 vector mcdintr #controller matcd0 at isa? port 0x230 bio #device scd0 at isa? port 0x230 bio # syscons is the default console driver, resembling an SCO console device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint #options "PCVT_FREEBSD=210" # pcvt running on FreeBSD 2.1 #options XSERVER # include code for XFree86 #device npx0 at isa? port "IO_NPX" irq 13 vector npxintr device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr #device sio2 at isa? port "IO_COM3" tty irq 5 vector siointr #device sio3 at isa? port "IO_COM4" tty irq 9 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr #device lpt1 at isa? port? tty #device lpt2 at isa? port? tty #device mse0 at isa? port 0x23c tty irq 5 vector mseintr # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. #device de0 device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr #device ed1 at isa? port 0x300 net irq 5 iomem 0xd8000 vector edintr #device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr #device ep0 at isa? port 0x300 net irq 10 vector epintr device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr #device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr #device lnc1 at isa? port 0x300 net irq 10 drq 0 vector lncintr #device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr #device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr pseudo-device loop pseudo-device ether pseudo-device log #pseudo-device sl 1 # ijppp uses tun instead of ppp device #pseudo-device ppp 1 #pseudo-device tun 1 pseudo-device pty 4 #pseudo-device gzip # Exec gzipped a.out's
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2CC890E06FB>