Date: Wed, 3 Aug 2011 23:16:39 -0500 From: Antonio Olivares <olivares14031@gmail.com> To: Warren Block <wblock@wonkity.com> Cc: FreeBSD Questions <freebsd-questions@freebsd.org> Subject: Re: help setup an HP 3300C scanner Message-ID: <CAJ5UdcM3TES1NJUb91X3MrtqR74A2D%2BRxmCF7pHrQtxg87%2Bf1w@mail.gmail.com> In-Reply-To: <alpine.BSF.2.00.1108032133440.15916@wonkity.com> References: <CAJ5UdcM6OZe48v34o68YHBZsjW41zsKaS_fdOF14jZwneCeXjw@mail.gmail.com> <CAJ5UdcNaX7CR8=rFpRbUY3BrPdB7LVbDREOVoZ1EAQ90WQPKng@mail.gmail.com> <CAJ5UdcMAjJ3TP%2BcwWevmotbrXL1m8BiOZ_JkGkJFyBMH_s8wnw@mail.gmail.com> <alpine.BSF.2.00.1108032133440.15916@wonkity.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Warren, On Wed, Aug 3, 2011 at 10:48 PM, Warren Block <wblock@wonkity.com> wrote: > On Wed, 3 Aug 2011, Antonio Olivares wrote: > >> This as root though, but as simple user cannot do much :(, again xsane >> tells me that no devices were found :( >> >> Suggestions/Advice/comments are welcome and appreciated. > > To hit some relevant points... > > The uscanner device is gone, no longer needed with FreeBSD-8. > > devfs.conf hasn't been effective for dynamic devices for me. =A0Copying t= he > clever technique from sysutils/scanbuttond/pkg-message.in, I use devd.con= f > to detect the scanner attach and detach devices and change permissions an= d > do whatever else is necessary. =A0Scanner users are a member of the saned > group. > > # WB > # detect Epson Perfection 1640SU scanner and start scanbuttond > attach 20 { > =A0 =A0 =A0 =A0device-name "ugen[0-9].[0-9]"; > =A0 =A0 =A0 =A0match "vendor" "0x04b8"; > =A0 =A0 =A0 =A0match "product" "0x010a"; > =A0 =A0 =A0 =A0action "usb_devaddr=3D`echo $device-name | sed 's#^ugen##'= ` && \ > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0chown root:saned /dev/usb/${usb_devaddr}.*= && \ > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0chmod 0660 /dev/usb/${usb_devaddr}.* && \ > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0su saned -c '/usr/local/bin/scanbuttond \ > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0-s /usr/local/etc/scanbuttond/buttonpresse= d.sh \ > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0-S /usr/local/etc/scanbuttond/initscanner.= sh \ > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0-b /usr/local/lib/libscanbtnd-backend_epso= n.so'"; > }; > > # WB > # remove Epson Perfection 1640SU uscanner0 link and stop scanbuttond > detach 20 { > =A0 =A0 =A0 =A0device-name "ugen[0-9].[0-9]"; > =A0 =A0 =A0 =A0match "vendor" "0x04b8"; > =A0 =A0 =A0 =A0match "product" "0x010a"; > =A0 =A0 =A0 =A0action "/usr/bin/pkill scanbuttond"; > }; > > Thank you for your message. I have added the following: # AAO # detect HP ScanJet 3300C attach 20 { device-name "ugen[0-9].[0-9]"; match "vendor" "0x03f0"; match "product" "0x0205"; action "usb_devaddr=3D`echo $device-name | sed 's#^ugen##'` && \ chown root:saned /dev/usb/${usb_devaddr}.* && \ chmod 0660 /dev/usb/${usb_devaddr}.* && \ su saned -c '/usr/local/bin/scanbuttond \ -s /usr/local/etc/scanbuttond/buttonpressed.sh \ -S /usr/local/etc/scanbuttond/initscanner.sh \ -b /usr/local/lib/libscanbtnd-backend_epson.so'"; }; # AAO # remove HP ScanJet 3300C detach 20 { device-name "ugen[0-9].[0-9]"; match "vendor" "0x03f0"; match "product" "0x0205"; action "/usr/bin/pkill scanbuttond"; }; to file /etc/devd.conf and xsane still tells me that I do not have any devi= ces? I restarted devd service # /etc/rc.d/devd restart and I get : quadcore# /etc/rc.d/devd restart devd not running? Starting devd. devd: devd already running, pid: 801 /etc/rc.d/devd: WARNING: failed to start devd I have also added myself to the "saned" group: quadcore# cat /etc/group | grep 'saned' saned:*:194:olivares What else do I need to do? Thank you for your help & suggestions. Regards, Antonio
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ5UdcM3TES1NJUb91X3MrtqR74A2D%2BRxmCF7pHrQtxg87%2Bf1w>