Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 24 Nov 2011 17:47:49 +0100
From:      bsd <bsd@todoo.biz>
To:        Liste FreeBSD <freebsd-questions@freebsd.org>
Subject:   Problem with uart interfaces 
Message-ID:  <E622F877-69D5-4597-88A6-71AC3DFACA6F@todoo.biz>

next in thread | raw e-mail | index | archive | help
Hello,=20

I have a serious problem with LAN bypass.=20
I am configuring a new appliance which embeddeds a LAN bypass on four =
ethernet cards.=20

When the system boots, it freezes at the stage of uart interface =
detection :=20


> Consoles: internal video/keyboard  serial port
> BIOS drive C: is disk0
> BIOS 631kB/2085632kB available memory
>=20
> FreeBSD/i386 bootstrap loader, Revision 1.1
> (root@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org, Sat Sep  3 19:36:15 =
EDT 2011)
> Loading /boot/defaults/loader.conf
> /boot/kernel/kernel text=3D0x8a1d58 data=3D0x3c9e94+0x9b6a0 =
syms=3D[0x4+0x94100+0x4+0xcaf47]
> \
>=20
>=20
>  ZDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD?
>  3                                         3
>  3                                         3
>  3                                         3
>  3          Welcome to pfSense!            3
>  3                                         3                 ______
>  3                                         3                /      \
>  3  1. Boot pfSense [default]              3          _____/    f   \
>  3  2. Boot pfSense with ACPI disabled     3         /     \        /
>  3  3. Boot pfSense using USB device       3        /   p   \______/  =
Sense
>  3  4. Boot pfSense in Safe Mode           3        \       /      \
>  3  5. Boot pfSense in single user mode    3         \_____/        \
>  3  6. Boot pfSense with verbose logging   3               \        /
>  3  7. Escape to loader prompt             3                \______/
>  3  8. Reboot                              3
>  3                                         3
>  3                                         3
>  3                                         3
>  3  Select option, [Enter] for default     3
>  3  or [Space] to pause timer  0           3
>  @DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDY
>=20
>=20
> Copyright (c) 1992-2010 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, =
1994
>         The Regents of the University of California. All rights =
reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 8.1-RELEASE-p4 #0: Sat Sep  3 20:00:14 EDT 2011
>     =
root@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj./usr/pfSensesrc/sr=
c/sys/pfSense_wrap.8.i386 i386
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Atom(TM) CPU D525   @ 1.80GHz (1795.51-MHz 686-class =
CPU)
>   Origin =3D "GenuineIntel"  Id =3D 0x106ca  Family =3D 6  Model =3D =
1c  Stepping =3D 10
>   =
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>   =
Features2=3D0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE=
>
>   AMD Features=3D0x20100000<NX,LM>
>   AMD Features2=3D0x1<LAHF>
>   TSC: P-state invariant
> real memory  =3D 2147483648 (2048 MB)
> avail memory =3D 2076377088 (1980 MB)
> ACPI APIC Table: <PTLTD          APIC  >
> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
> FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 HTT threads
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP/HT): APIC ID:  1
>  cpu2 (AP): APIC ID:  2
>  cpu3 (AP/HT): APIC ID:  3
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> netisr_init: forcing maxthreads to 1 and bindthreads to 0 for device =
polling
> wlan: mac acl policy registered
> ipw_bss: You need to read the LICENSE file in =
/usr/share/doc/legal/intel_ipw/.
> ipw_bss: If you agree with the license, set =
legal.intel_ipw.license_ack=3D1 in /boot/loader.conf.
> module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0710010, 0) error 1
> ipw_ibss: You need to read the LICENSE file in =
/usr/share/doc/legal/intel_ipw/.
> ipw_ibss: If you agree with the license, set =
legal.intel_ipw.license_ack=3D1 in /boot/loader.conf.
> module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc07100b0, 0) error 1
> wpi: You need to read the LICENSE file in =
/usr/share/doc/legal/intel_wpi/.
> wpi: If you agree with the license, set legal.intel_wpi.license_ack=3D1 =
in /boot/loader.conf.
> module_register_init: MOD_LOAD (wpi_fw, 0xc0883050, 0) error 1
> ipw_monitor: You need to read the LICENSE file in =
/usr/share/doc/legal/intel_ipw/.
> ipw_monitor: If you agree with the license, set =
legal.intel_ipw.license_ack=3D1 in /boot/loader.conf.
> module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc0710150, 0) error 1
> cryptosoft0: <software crypto> on motherboard
> padlock0: No ACE support.
> acpi0: <PTLTD    XSDT> on motherboard
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> cpu2: <ACPI CPU> on acpi0
> cpu3: <ACPI CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> vgapci0: <VGA-compatible display> port 0x1c10-0x1c17 mem =
0xf0700000-0xf077ffff,0xd0000000-0xdfffffff,0xf0000000-0xf00fffff irq 16 =
at device 2.0 on pci0
> vgapci1: <VGA-compatible display> mem 0xf0780000-0xf07fffff at device =
2.1 on pci0
> uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x1820-0x183f =
irq 16 at device 26.0 on pci0
> uhci0: [ITHREAD]
> usbus0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
> uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x1840-0x185f =
irq 21 at device 26.1 on pci0
> uhci1: [ITHREAD]
> usbus1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
> ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem =
0xf0a01000-0xf0a013ff irq 18 at device 26.7 on pci0
> ehci0: [ITHREAD]
> usbus2: EHCI version 1.0
> usbus2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0
> pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
> pci5: <ACPI PCI bus> on pcib1
> em0: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x2000-0x201f =
mem 0xf0120000-0xf013ffff,0xf0100000-0xf0103fff irq 16 at device 0.0 on =
pci5
> em0: Using an MSI interrupt
> em0: [FILTER]
> pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
> pci7: <ACPI PCI bus> on pcib2
> em1: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x3000-0x301f =
mem 0xf0200000-0xf021ffff,0xf0220000-0xf0223fff irq 17 at device 0.0 on =
pci7
> em1: Using an MSI interrupt
> em1: [FILTER]
> pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
> pci9: <ACPI PCI bus> on pcib3
> em2: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x4000-0x401f =
mem 0xf0320000-0xf033ffff,0xf0300000-0xf0303fff irq 18 at device 0.0 on =
pci9
> em2: Using an MSI interrupt
> em2: [FILTER]
> pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
> pci11: <ACPI PCI bus> on pcib4
> em3: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x5000-0x501f =
mem 0xf0400000-0xf041ffff,0xf0420000-0xf0423fff irq 19 at device 0.0 on =
pci11
> em3: Using an MSI interrupt
> em3: [FILTER]
> pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
> pci12: <ACPI PCI bus> on pcib5
> em4: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x6000-0x601f =
mem 0xf0520000-0xf053ffff,0xf0500000-0xf0503fff irq 16 at device 0.0 on =
pci12
> em4: Using an MSI interrupt
> em4: [FILTER]
> pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
> pci13: <ACPI PCI bus> on pcib6
> em5: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x7000-0x701f =
mem 0xf0600000-0xf061ffff,0xf0620000-0xf0623fff irq 17 at device 0.0 on =
pci13
> em5: Using an MSI interrupt
> em5: [FILTER]
> uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x1860-0x187f =
irq 23 at device 29.0 on pci0
> uhci2: [ITHREAD]
> usbus3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
> uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x1880-0x189f =
irq 19 at device 29.1 on pci0
> uhci3: [ITHREAD]
> usbus4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
> uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x18a0-0x18bf =
irq 18 at device 29.2 on pci0
> uhci4: [ITHREAD]
> usbus5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
> ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem =
0xf0a01400-0xf0a017ff irq 23 at device 29.7 on pci0
> ehci1: [ITHREAD]
> usbus6: EHCI version 1.0
> usbus6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1
> pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci17: <ACPI PCI bus> on pcib7
> em6: <Intel(R) PRO/1000 Legacy Network Connection 1.0.3> port =
0x8000-0x803f mem 0xf0b20000-0xf0b3ffff,0xf0b00000-0xf0b1ffff irq 18 at =
device 6.0 on pci17
> em6: Memory Access and/or Bus Master bits were not set!
> em6: [FILTER]
> em7: <Intel(R) PRO/1000 Legacy Network Connection 1.0.3> port =
0x8040-0x807f mem 0xf0b60000-0xf0b7ffff,0xf0b40000-0xf0b5ffff irq 19 at =
device 7.0 on pci17
> em7: Memory Access and/or Bus Master bits were not set!
> em7: [FILTER]
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH8M UDMA100 controller> port =
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18e0-0x18ef at device 31.1 on pci0
> ata0: <ATA channel 0> on atapci0
> ata0: [ITHREAD]
> atapci1: <Intel ICH8M SATA300 controller> port =
0x1c40-0x1c47,0x1c34-0x1c37,0x1c38-0x1c3f,0x1c30-0x1c33,0x1c00-0x1c0f,0x18=
f0-0x18ff irq 19 at device 31.2 on pci0
> atapci1: [ITHREAD]
> ata2: <ATA channel 0> on atapci1
> ata2: [ITHREAD]
> ata3: <ATA channel 1> on atapci1
> ata3: [ITHREAD]
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> pci0: <dasp> at device 31.6 (no driver attached)
> acpi_tz0: <Thermal Zone> on acpi0
> ACPI Warning for \_TZ_.TZ01._AL0: Return Package type mismatch at =
index 0 - found [NULL Object Descriptor], expected Reference =
(20100331/nspredef-1197)
> acpi_button0: <Power Button> on acpi0
> atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on =
acpi0
> uart0: [FILTER]
> uart0: console (9600,n,8,1)
> uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
> uart1: [FILTER]
> uart2: <16550 or compatible> port 0x3e8-0x3ef irq 5 on acpi0
> uart2: [FILTER]
> uart3: <16550 or compatible> port 0x2e8-0x2ef irq 7 on acpi0
> uart3: [FILTER]


After nothing, the system is frozen with no option to act on It.=20
Reboot necessary !=20


I am using pfSense v.2.0-Release which is based on 8.1 version of FBSD.=20=

=20
Hardware is as follow :=20

Processor:
=E2=80=A7	Intel Dual- Core D525 1.8 GHz Processor

Memory:
=E2=80=A7	2x 204- pin SO-DIMM sockets, up to 4GB of DDR-3

Ethernet:
=E2=80=A7	6x PCI- E I/F LAN ports (Intel 82583 v GbE controller)
=E2=80=A7	2x PCI I/F LAN ports ( Intel 82541 PI GbE controller)

LAN By-Pass Function:
=E2=80=A7	2x pairs of PCI-E GbE ports support
=E2=80=A7	By- pass Enable/ Disable option
=E2=80=A7	By- pass Preset option
=E2=80=A7	By- pass Setup option




Any advise on how to solve this issue will be=E2=80=A6 most welcome !!!=20=



Thanks=20

=
=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=
=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=
=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=
=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=
=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=
=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93
---------> Gr=C3=A9gory Bernard Director <---------
---------------> www.osnet.eu <---------------
--> Your provider of OpenSource appliances <--
=
=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=
=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=
=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=
=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=
=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93=E2=80=
=93=E2=80=93=E2=80=93=E2=80=93=E2=80=93
OSnetOSnetOSnetOSnetOSnetOSnetOSnetOSnetOSnetO




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E622F877-69D5-4597-88A6-71AC3DFACA6F>