From owner-freebsd-scsi@FreeBSD.ORG Mon Oct 12 11:07:01 2009 Return-Path: Delivered-To: freebsd-scsi@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 98E0E1065693 for ; Mon, 12 Oct 2009 11:07:01 +0000 (UTC) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 7D13B8FC1E for ; Mon, 12 Oct 2009 11:07:01 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.3/8.14.3) with ESMTP id n9CB71ce036543 for ; Mon, 12 Oct 2009 11:07:01 GMT (envelope-from owner-bugmaster@FreeBSD.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.3/8.14.3/Submit) id n9CB70Sh036539 for freebsd-scsi@FreeBSD.org; Mon, 12 Oct 2009 11:07:00 GMT (envelope-from owner-bugmaster@FreeBSD.org) Date: Mon, 12 Oct 2009 11:07:00 GMT Message-Id: <200910121107.n9CB70Sh036539@freefall.freebsd.org> X-Authentication-Warning: freefall.freebsd.org: gnats set sender to owner-bugmaster@FreeBSD.org using -f From: FreeBSD bugmaster To: freebsd-scsi@FreeBSD.org Cc: Subject: Current problem reports assigned to freebsd-scsi@FreeBSD.org X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 12 Oct 2009 11:07:01 -0000 Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description -------------------------------------------------------------------------------- o kern/138789 scsi [cam] [patch] cd(4) patch for drives/discs failing the o kern/138384 scsi [ips] [patch] NULL pointer dereference in ipsd_dump() o kern/138379 scsi [aic7xxx] [patch] Memory leak in output_listing() in f o kern/138376 scsi [cam] [patch] Memory leak in scsi_low_attach_xs() in f o kern/134488 scsi [mpt] MPT SCSI driver probes max. 8 LUNs per device o amd64/132394 scsi [isp] - bad underruns with QLogic qla2300 and amd64 o kern/132250 scsi [ciss] ciss driver does not support more then 15 drive o kern/132206 scsi [mpt] system panics on boot when mirroring and 2nd dri o kern/131032 scsi [panic] hald causing panic in scsi_sg o kern/130735 scsi [cam] [patch] pass M_NOWAIT to the malloc() call insid o kern/130621 scsi [mpt] tranfer rate is inscrutable slow when use lsi213 o kern/129602 scsi [ahd] ahd(4) gets confused and wedges SCSI bus o kern/128452 scsi [sa] [panic] Accessing SCSI tape drive randomly crashe o kern/128245 scsi [scsi] "inquiry data fails comparison at DV1 step" [re o kern/127927 scsi [isp] isp(4) target driver crashes kernel when set up o kern/126866 scsi [isp] [panic] kernel panic on card initialization o kern/124667 scsi [amd] [panic] FreeBSD-7 kernel page faults at amd-scsi o kern/123674 scsi [ahc] ahc driver dumping o kern/123666 scsi [aac] attach fails with Adaptec SAS RAID 3805 controll o sparc/121676 scsi [iscsi] iscontrol do not connect iscsi-target on sparc o kern/120487 scsi [sg] scsi_sg incompatible with scanners o kern/120247 scsi [mpt] FreeBSD 6.3 and LSI Logic 1030 = only 3.300MB/s o kern/119668 scsi [cam] [patch] certain errors are too verbose comparing o kern/114597 scsi [sym] System hangs at SCSI bus reset with dual HBAs o kern/110847 scsi [ahd] Tyan U320 onboard problem with more than 3 disks o kern/99954 scsi [ahc] reading from DVD failes on 6.x [regression] o kern/94838 scsi Kernel panic while mounting SD card with lock switch o o kern/92798 scsi [ahc] SCSI problem with timeouts o kern/90282 scsi [sym] SCSI bus resets cause loss of ch device o kern/76178 scsi [ahd] Problem with ahd and large SCSI Raid system o kern/74627 scsi [ahc] [hang] Adaptec 2940U2W Can't boot 5.3 s kern/61165 scsi [panic] kernel page fault after calling cam_send_ccb o kern/60641 scsi [sym] Sporadic SCSI bus resets with 53C810 under load o kern/60598 scsi wire down of scsi devices conflicts with config s kern/57398 scsi [mly] Current fails to install on mly(4) based RAID di o kern/52638 scsi [panic] SCSI U320 on SMP server won't run faster than o kern/44587 scsi dev/dpt/dpt.h is missing defines required for DPT_HAND o kern/40895 scsi wierd kernel / device driver bug o kern/39388 scsi ncr/sym drivers fail with 53c810 and more than 256MB m o kern/38828 scsi [dpt] [request] DPT PM2012B/90 doesn't work o kern/35234 scsi World access to /dev/pass? (for scanner) requires acce 41 problems total. From owner-freebsd-scsi@FreeBSD.ORG Mon Oct 12 19:21:52 2009 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6697A106566B for ; Mon, 12 Oct 2009 19:21:52 +0000 (UTC) (envelope-from mays@win.net) Received: from filter1.win.net (filter1.win.net [216.24.27.101]) by mx1.freebsd.org (Postfix) with ESMTP id 2BD068FC1C for ; Mon, 12 Oct 2009 19:21:52 +0000 (UTC) Received: from nb-201.win.net (nb-201.win.net [216.24.27.201]) by filter1.win.net (8.13.4/8.13.4/Debian-3sarge3) with ESMTP id n9CJ53dZ012598 for ; Mon, 12 Oct 2009 15:05:03 -0400 Received: from engineering01 (pool185.office.win.net [216.24.33.185]) by nb-201.win.net (Postfix) with SMTP id E088461C26 for ; Mon, 12 Oct 2009 15:05:02 -0400 (EDT) Message-ID: <00f901ca4b6e$e337ef60$b92118d8@engineering01> From: "Joseph Mays" To: Date: Mon, 12 Oct 2009 15:04:55 -0400 MIME-Version: 1.0 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.3598 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.3350 X-Bayes-Prob: 0.0001 (Score 0: No Bayes scoring rules defined, tokens from: WinNetOutbound) X-Spam-Score: 0.00 () [Hold at 4.50] HTML_MESSAGE X-CanIt-Geo: ip=216.24.27.201; country=US; region=KY; city=Louisville; postalcode=40204; latitude=38.2390; longitude=-85.7174; metrocode=529; areacode=502; http://maps.google.com/maps?q=38.2390,-85.7174&z=6 X-CanItPRO-Stream: base:WinNetOutbound X-Canit-Stats-ID: 164639887 - a5a959692dad X-Scanned-By: CanIt (www . roaringpenguin . com) on 216.24.27.101 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: aaccli question X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 12 Oct 2009 19:21:52 -0000 Okay, we had a disk go bad on a raid controller. I replaced the disk = with an identical disk, expecting it to rebuild. "disk list" aaccli = showed the new disk was not initialized. So I initialized it with "disk = initialize 03," but still nothing ever happened in the task list and the = array is still running in degraded mode. C:ID:L Device Type Blocks Bytes/Block Usage Shared = Rate ------ -------------- --------- ----------- ---------------- ------ = ---- 0:01:0 Disk 71775284 512 Initialized NO = 320 0:02:0 Disk 71775284 512 Initialized NO = 320 0:03:0 Disk 71775284 512 Initialized NO = 320 0:04:0 Disk 71775284 512 Initialized NO = 320 AAC0> container list Executing: container list Num Total Oth Stripe Scsi Partition Label Type Size Ctr Size Usage C:ID:L Offset:Size ----- ------ ------ --- ------ ------- ------ ------------- 0 RAID-5 68.3GB 256KB Open 0:01:0 64.0KB:34.1GB /dev/aacd0 admin4 0:02:0 64.0KB:34.1GB 0:04:0 64.0KB:34.1GB AAC0> task list Executing: task list Controller Tasks TaskId Function Done% Container State Specific1 Specific2 ------ -------- ------- --------- ----- --------- --------- No tasks currently running on controller AAC0> I assume I need to add the disk to the container as a failover, but both = iterations I tried, "container set failover 0,3,0" and "container set = failover 3) failed saying "incorrect parameters". What should the syntax = of this command be? I would try "container set failover 0 3" were I not = afraid of breaking the array. I have it backed up, but I really would = rather not restore the entire system from backup. Joe From owner-freebsd-scsi@FreeBSD.ORG Tue Oct 13 00:16:53 2009 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id A2EAD1065670 for ; Tue, 13 Oct 2009 00:16:53 +0000 (UTC) (envelope-from scottl@samsco.org) Received: from pooker.samsco.org (pooker.samsco.org [168.103.85.57]) by mx1.freebsd.org (Postfix) with ESMTP id 400508FC1D for ; Tue, 13 Oct 2009 00:16:52 +0000 (UTC) Received: from [IPv6:::1] (pooker.samsco.org [168.103.85.57]) (authenticated bits=0) by pooker.samsco.org (8.14.2/8.14.2) with ESMTP id n9D0GkvW001711; Mon, 12 Oct 2009 18:16:46 -0600 (MDT) (envelope-from scottl@samsco.org) Mime-Version: 1.0 (Apple Message framework v1075.2) Content-Type: text/plain; charset=us-ascii; format=flowed; delsp=yes From: Scott Long X-Priority: 3 In-Reply-To: <00f901ca4b6e$e337ef60$b92118d8@engineering01> Date: Mon, 12 Oct 2009 18:16:46 -0600 Content-Transfer-Encoding: 7bit Message-Id: References: <00f901ca4b6e$e337ef60$b92118d8@engineering01> To: Joseph Mays X-Mailer: Apple Mail (2.1075.2) X-Spam-Status: No, score=-3.5 required=3.8 tests=ALL_TRUSTED,AWL,BAYES_00 autolearn=ham version=3.1.8 X-Spam-Checker-Version: SpamAssassin 3.1.8 (2007-02-13) on pooker.samsco.org Cc: freebsd-scsi@freebsd.org Subject: Re: aaccli question X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 13 Oct 2009 00:16:53 -0000 Set the disk as a global spare, the rebuild should happen immediately once you do that. Scott On Oct 12, 2009, at 1:04 PM, Joseph Mays wrote: > Okay, we had a disk go bad on a raid controller. I replaced the disk > with an identical disk, expecting it to rebuild. "disk list" aaccli > showed the new disk was not initialized. So I initialized it with > "disk initialize 03," but still nothing ever happened in the task > list and the array is still running in degraded mode. > > C:ID:L Device Type Blocks Bytes/Block Usage > Shared Rate > ------ -------------- --------- ----------- ---------------- > ------ ---- > 0:01:0 Disk 71775284 512 Initialized > NO 320 > 0:02:0 Disk 71775284 512 Initialized > NO 320 > 0:03:0 Disk 71775284 512 Initialized > NO 320 > 0:04:0 Disk 71775284 512 Initialized > NO 320 > > AAC0> container list > Executing: container list > Num Total Oth Stripe Scsi Partition > Label Type Size Ctr Size Usage C:ID:L Offset:Size > ----- ------ ------ --- ------ ------- ------ ------------- > 0 RAID-5 68.3GB 256KB Open 0:01:0 64.0KB:34.1GB > /dev/aacd0 admin4 0:02:0 64.0KB:34.1GB > 0:04:0 64.0KB:34.1GB > > > AAC0> task list > Executing: task list > > Controller Tasks > > TaskId Function Done% Container State Specific1 Specific2 > ------ -------- ------- --------- ----- --------- --------- > > No tasks currently running on controller > > AAC0> > > I assume I need to add the disk to the container as a failover, but > both iterations I tried, "container set failover 0,3,0" and > "container set failover 3) failed saying "incorrect parameters". > What should the syntax of this command be? I would try "container > set failover 0 3" were I not afraid of breaking the array. I have it > backed up, but I really would rather not restore the entire system > from backup. > > Joe > _______________________________________________ > freebsd-scsi@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-scsi > To unsubscribe, send any mail to "freebsd-scsi- > unsubscribe@freebsd.org" From owner-freebsd-scsi@FreeBSD.ORG Tue Oct 13 16:09:39 2009 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 1A739106568F for ; Tue, 13 Oct 2009 16:09:39 +0000 (UTC) (envelope-from mays@win.net) Received: from filter2.win.net (filter2.win.net [216.24.27.102]) by mx1.freebsd.org (Postfix) with ESMTP id C97838FC21 for ; Tue, 13 Oct 2009 16:09:38 +0000 (UTC) Received: from nb-202.win.net (nb-202.win.net [216.24.27.202]) by filter2.win.net (8.13.4/8.13.4/Debian-3sarge3) with ESMTP id n9DG9aN5014616 for ; Tue, 13 Oct 2009 12:09:36 -0400 Received: from engineering01 (pool185.office.win.net [216.24.33.185]) by nb-202.win.net (Postfix) with SMTP id 2423C22940 for ; Tue, 13 Oct 2009 12:09:36 -0400 (EDT) Message-ID: <011a01ca4c1f$8a98d750$b92118d8@engineering01> From: "Joseph Mays" To: References: <00f901ca4b6e$e337ef60$b92118d8@engineering01> Date: Tue, 13 Oct 2009 12:09:27 -0400 MIME-Version: 1.0 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.3598 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.3350 X-Bayes-Prob: 0.0001 (Score 0: No Bayes scoring rules defined, tokens from: WinNetOutbound) X-Spam-Score: 0.00 () [Hold at 4.50] HTML_MESSAGE X-CanIt-Geo: ip=216.24.27.202; country=US; region=KY; city=Louisville; postalcode=40204; latitude=38.2390; longitude=-85.7174; metrocode=529; areacode=502; http://maps.google.com/maps?q=38.2390,-85.7174&z=6 X-CanItPRO-Stream: base:WinNetOutbound X-Canit-Stats-ID: 164754664 - 34feb7a26fa9 X-Scanned-By: CanIt (www . roaringpenguin . com) on 216.24.27.102 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Re: aaccli question X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 13 Oct 2009 16:09:39 -0000 > Set the disk as a global spare, the rebuild should happen immediately = > once you do that. Tried that now, but no luck. Perhaps I did it wrong. Tried setting the = disk specifically as a failover for the container, too. AAC0> container set global_failover 03 Executing: container set global_failover (ID=3D3) AAC0> disk list Executing: disk list C:ID:L Device Type Blocks Bytes/Block Usage Shared = Rate ------ -------------- --------- ----------- ---------------- ------ = ---- 0:01:0 Disk 71775284 512 Initialized NO = 320 0:02:0 Disk 71775284 512 Initialized NO = 320 0:03:0 Disk 71775284 512 Initialized NO = 320 0:04:0 Disk 71775284 512 Initialized NO = 320 AAC0> container list Executing: container list Num Total Oth Stripe Scsi Partition Label Type Size Ctr Size Usage C:ID:L Offset:Size ----- ------ ------ --- ------ ------- ------ ------------- 0 RAID-5 68.3GB 256KB Open 0:01:0 64.0KB:34.1GB /dev/aacd0 admin4 0:02:0 64.0KB:34.1GB 0:04:0 64.0KB:34.1GB AAC0> task list Executing: task list Controller Tasks TaskId Function Done% Container State Specific1 Specific2 ------ -------- ------- --------- ----- --------- --------- No tasks currently running on controller AAC0> container set failover 0 03 Executing: container set failover 0 (ID=3D3) AAC0> task list Executing: task list Controller Tasks TaskId Function Done% Container State Specific1 Specific2 ------ -------- ------- --------- ----- --------- --------- No tasks currently running on controller From owner-freebsd-scsi@FreeBSD.ORG Wed Oct 14 06:55:35 2009 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 27C691065696; Wed, 14 Oct 2009 06:55:35 +0000 (UTC) (envelope-from paul+fbsd@it.ca) Received: from mail.it.ca (mail.it.ca [216.235.7.67]) by mx1.freebsd.org (Postfix) with ESMTP id BDE3F8FC08; Wed, 14 Oct 2009 06:55:34 +0000 (UTC) Received: from mail.it.ca (paul@mail [216.235.7.67]) by mail.it.ca (8.13.3/8.13.3) with ESMTP id n9E6rAQk098355; Wed, 14 Oct 2009 02:53:10 -0400 (EDT) (envelope-from paul+fbsd@it.ca) DomainKey-Signature: a=rsa-sha1; s=a; d=it.ca; c=nofws; q=dns; h=received:x-authentication-warning:date:from:to:cc:subject: message-id:references:mime-version:content-type: content-disposition:in-reply-to:user-agent; b=ciSnGhFunVStVQgcrj6Fz4hQv2FKKGQGJH1W0ozuISvZY79X/XSC2hAovDAjfCJgb iDsOhAxRnJGaT1fW7cHuBokp9lcVEqlxzq+kbqndOCk7853CRUKbNCgwqHVkJBd Received: (from paul@localhost) by mail.it.ca (8.13.3/8.13.3/Submit) id n9E6r9CV098354; Wed, 14 Oct 2009 02:53:09 -0400 (EDT) (envelope-from paul+fbsd@it.ca) X-Authentication-Warning: mail.it.ca: paul set sender to paul+fbsd@it.ca using -f Date: Wed, 14 Oct 2009 02:53:09 -0400 From: Paul Chvostek To: Sean Bruno Message-ID: <20091014065309.GA95320@it.ca> References: <20091010211452.GA44208@it.ca> <1255211359.2521.15.camel@Lappy> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1255211359.2521.15.camel@Lappy> User-Agent: Mutt/1.5.12-2006-07-14 X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-3.0 (mail.it.ca [216.235.7.67]); Wed, 14 Oct 2009 02:53:10 -0400 (EDT) Cc: freebsd-scsi@freebsd.org, freebsd-hardware@freebsd.org Subject: Re: juke box problem - "chio: /dev/ch0: CHIOMOVE: Device not configured" X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 14 Oct 2009 06:55:35 -0000 Hi Sean, On Sat, Oct 10, 2009 at 02:49:19PM -0700, Sean Bruno wrote: > > On Sat, 2009-10-10 at 17:14 -0400, Paul Chvostek wrote: > > 000031L4 > > Huh ... have you tried moving the tape by "voltag" ?? > > e.g. > > move voltag 000020L4 drive 0 I have now, but with the same result: # chio status -v | grep drive drive 0: voltag: <000039L4:0> drive 1: voltag: <000030L4:0> # # chio move voltag 000030L4 slot 44 chio: /dev/ch0: CHIOMOVE: Device not configured # # tail -6 /var/log/messages Oct 14 02:48:16 nas kernel: (ch0:isp0:0:0:1): MOVE MEDIUM. CDB: a5 0 0 0 0 2 4 15 0 0 0 0 Oct 14 02:48:16 nas kernel: (ch0:isp0:0:0:1): CAM Status: SCSI Status Error Oct 14 02:48:16 nas kernel: (ch0:isp0:0:0:1): SCSI Status: Check Condition Oct 14 02:48:16 nas kernel: (ch0:isp0:0:0:1): ILLEGAL REQUEST asc:25,0 Oct 14 02:48:16 nas kernel: (ch0:isp0:0:0:1): Logical unit not supported Oct 14 02:48:16 nas kernel: (ch0:isp0:0:0:1): Unretryable error Is there a way to determine whether this problem is with the device or with FreeBSD? Note that I *can* move the tapes around using the juke box's web gui, so it's not a physical problem. For reference: # grep 'at isp0' /var/run/dmesg.boot sa0 at isp0 bus 0 target 0 lun 0 ch0 at isp0 bus 0 target 0 lun 1 Thanks muchly. -- Paul Chvostek Operations / Abuse / Whatever it.canada, hosting and development http://www.it.ca/ From owner-freebsd-scsi@FreeBSD.ORG Wed Oct 14 15:01:22 2009 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id BA87C1065697 for ; Wed, 14 Oct 2009 15:01:22 +0000 (UTC) (envelope-from ken@nargothrond.kdm.org) Received: from nargothrond.kdm.org (nargothrond.kdm.org [70.56.43.81]) by mx1.freebsd.org (Postfix) with ESMTP id 4E2D18FC13 for ; Wed, 14 Oct 2009 15:01:21 +0000 (UTC) Received: from nargothrond.kdm.org (localhost [127.0.0.1]) by nargothrond.kdm.org (8.14.2/8.13.6) with ESMTP id n9EF1CkI054968; Wed, 14 Oct 2009 09:01:12 -0600 (MDT) (envelope-from ken@nargothrond.kdm.org) Received: (from ken@localhost) by nargothrond.kdm.org (8.14.2/8.14.2/Submit) id n9EF1Br7054966; Wed, 14 Oct 2009 09:01:11 -0600 (MDT) (envelope-from ken) Date: Wed, 14 Oct 2009 09:01:11 -0600 From: "Kenneth D. Merry" To: Paul Chvostek Message-ID: <20091014150111.GA54658@nargothrond.kdm.org> References: <20091010211452.GA44208@it.ca> <1255211359.2521.15.camel@Lappy> <20091014065309.GA95320@it.ca> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20091014065309.GA95320@it.ca> User-Agent: Mutt/1.4.2i X-Virus-Scanned: ClamAV 0.92.1/9894/Wed Oct 14 05:07:27 2009 on nargothrond.kdm.org X-Virus-Status: Clean Cc: Sean Bruno , freebsd-hardware@freebsd.org, freebsd-scsi@freebsd.org Subject: Re: juke box problem - "chio: /dev/ch0: CHIOMOVE: Device not configured" X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 14 Oct 2009 15:01:22 -0000 On Wed, Oct 14, 2009 at 02:53:09 -0400, Paul Chvostek wrote: > Hi Sean, > > On Sat, Oct 10, 2009 at 02:49:19PM -0700, Sean Bruno wrote: > > > > On Sat, 2009-10-10 at 17:14 -0400, Paul Chvostek wrote: > > > 000031L4 > > > > Huh ... have you tried moving the tape by "voltag" ?? > > > > e.g. > > > > move voltag 000020L4 drive 0 > > I have now, but with the same result: > > # chio status -v | grep drive > drive 0: voltag: <000039L4:0> > drive 1: voltag: <000030L4:0> > # > # chio move voltag 000030L4 slot 44 > chio: /dev/ch0: CHIOMOVE: Device not configured > # > # tail -6 /var/log/messages > Oct 14 02:48:16 nas kernel: (ch0:isp0:0:0:1): MOVE MEDIUM. CDB: a5 0 0 0 0 2 4 15 0 0 0 0 > Oct 14 02:48:16 nas kernel: (ch0:isp0:0:0:1): CAM Status: SCSI Status Error > Oct 14 02:48:16 nas kernel: (ch0:isp0:0:0:1): SCSI Status: Check Condition > Oct 14 02:48:16 nas kernel: (ch0:isp0:0:0:1): ILLEGAL REQUEST asc:25,0 > Oct 14 02:48:16 nas kernel: (ch0:isp0:0:0:1): Logical unit not supported > Oct 14 02:48:16 nas kernel: (ch0:isp0:0:0:1): Unretryable error Typically a "Logical unit not supported" error means that that particular LUN (in this case LUN 1) isn't supported/doesn't exist. (Which would be strange, given that it does probe.) Could the changer be in autoloader mode? That's the only thing I can think of that would cause an error like that. The only other explanation is that they're misusing that error to say that it doesn't like the particular move you're trying to do. > Is there a way to determine whether this problem is with the device or > with FreeBSD? Note that I *can* move the tapes around using the juke > box's web gui, so it's not a physical problem. > > For reference: > > # grep 'at isp0' /var/run/dmesg.boot > sa0 at isp0 bus 0 target 0 lun 0 > ch0 at isp0 bus 0 target 0 lun 1 Ken -- Kenneth Merry ken@kdm.org From owner-freebsd-scsi@FreeBSD.ORG Thu Oct 15 10:16:24 2009 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6A07E106566B for ; Thu, 15 Oct 2009 10:16:24 +0000 (UTC) (envelope-from pluknet@gmail.com) Received: from mail-fx0-f222.google.com (mail-fx0-f222.google.com [209.85.220.222]) by mx1.freebsd.org (Postfix) with ESMTP id 97EEE8FC17 for ; Thu, 15 Oct 2009 10:16:23 +0000 (UTC) Received: by fxm22 with SMTP id 22so870847fxm.36 for ; Thu, 15 Oct 2009 03:16:22 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:received:date:message-id:subject :from:to:content-type; bh=VYVghe5PG9sNIQjzmJuwhBTv0NA7QV7Z2pnS7uGgX1o=; b=aKcukn/N9xiqeuBI9uwLG7h/hSbWsIRB+gGuMUUTV2Wq63ngzqNsh1HYXa5dL5k5+0 6kgAMgLKpx7l7yDw4YiEc6pUwGk9ELheoYoxJCKtLDtIQOGymqsu2n18yhwJOSqheA1j OX9kessD5LDaR7tv9PgM3bIyQPqgk+Y2/9bDI= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:date:message-id:subject:from:to:content-type; b=ZQkoXfSZuukN4ppjLowdAk1DqazszV6wLfZvIRqUKeR/3MOIjPGdmci02JpBmH+GUG HKd9BBF3ueugOlRJVHiS5r0TXes+4iJ5Z3wYoYn193N85Lzwh8AU7IQwErFIcZA4Zdba KJknXJkJEhkfACpQ0AqS/IQ/R2QtwMZyzqzUc= MIME-Version: 1.0 Received: by 10.204.13.207 with SMTP id d15mr737721bka.157.1255600279881; Thu, 15 Oct 2009 02:51:19 -0700 (PDT) Date: Thu, 15 Oct 2009 13:51:19 +0400 Message-ID: From: pluknet To: freebsd-stable , freebsd-scsi Content-Type: text/plain; charset=ISO-8859-1 Cc: Subject: mfi(4) endless loop kernel output on attach X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 15 Oct 2009 10:16:24 -0000 Hi. This is 7.2-R. Seen on IBM x3650M2. During the boot I get those endless looping kernel messages while on mfi(4) attach phase. It's getting more odd since 7.2 booted and worked fine on exactly this server model months ago (on different box though).. Any hints? mfi0: 5428 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/0364/1014) mfi0: 5429 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 mfi0: 5430 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/0364/1014) mfi0: 5431 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 mfi0: 5432 (boot + 64s/0x0008/info) - Battery Present mfi0: 5433 (boot + 64s/0x0020/info) - BBU FRU is mfi0: 5434 (boot + 64s/0x0020/info) - Board Revision mfi0: 5435 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) mfi0: 5436 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) Info: enclPd=ffff, scsiType=0, portMap=00, sasAddr=5000c500138d46b5,0000000000000000 mfi0: 5437 (boot + 89s/0x0002/info) - PD 08(e0xff/s8) FRU is 42D0422 mfi0: 5438 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) mfi0: 5439 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) Info: enclPd=ffff, scsiType=0, portMap=01, sasAddr=5000c500138d842d,0000000000000000 mfi0: 5440 (boot + 89s/0x0002/info) - PD 09(e0xff/s9) FRU is 42D0422 mfi0: 5441 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) mfi0: 5442 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) Info: enclPd=ffff, scsiType=0, portMap=04, sasAddr=5000c500138d7d75,0000000000000000 mfi0: 5443 (boot + 89s/0x0002/info) - PD 0a(e0xff/s10) FRU is 42D0422 mfi0: 5444 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) mfi0: 5445 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) Info: enclPd=ffff, scsiType=0, portMap=05, sasAddr=5000c500138d7835,0000000000000000 mfi0: 5446 (boot + 89s/0x0002/info) - PD 0b(e0xff/s11) FRU is 42D0422 mfi0: 5447 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) mfi0: 5448 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) Info: enclPd=ffff, scsiType=0, portMap=02, sasAddr=5000c500138d60b5,0000000000000000 mfi0: 5449 (boot + 89s/0x0002/info) - PD 0c(e0xff/s12) FRU is 42D0422 mfi0: 5450 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) mfi0: 5451 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) Info: enclPd=ffff, scsiType=0, portMap=03, sasAddr=5000c500138d7bdd,0000000000000000 mfi0: 5452 (boot + 89s/0x0002/info) - PD 0d(e0xff/s13) FRU is 42D0422 mfi0: 5453 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) mfi0: 5454 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) Info: enclPd=ffff, scsiType=0, portMap=06, sasAddr=5000c500138d6839,0000000000000000 mfi0: 5455 (boot + 89s/0x0002/info) - PD 0e(e0xff/s14) FRU is 42D0422 mfi0: 5456 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) mfi0: 5457 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) Info: enclPd=ffff, scsiType=0, portMap=07, sasAddr=5000c500138d5e8d,0000000000000000 mfi0: 5458 (boot + 89s/0x0002/info) - PD 0f(e0xff/s15) FRU is 42D0422 mfi0: 5459 (boot + 144s/0x0008/info) - Battery temperature is normal mfi0: 5460 (308390540s/0x0020/info) - Time established as 10/09/09 8:02:20; (256 seconds since power on) mfi0: 5461 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/0364/1014) mfi0: 5462 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 mfi0: 5463 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/0364/1014) mfi0: 5464 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 mfi0: 5465 (boot + 64s/0x0008/info) - Battery Present mfi0: 5466 (boot + 64s/0x0020/info) - BBU FRU is mfi0: 5467 (boot + 64s/0x0020/info) - Board Revision mfi0: 5468 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) mfi0: 5469 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) Info: enclPd=ffff, scsiType=0, portMap=00, sasAddr=5000c500138d46b5,0000000000000000 mfi0: 5470 (boot + 89s/0x0002/info) - PD 08(e0xff/s8) FRU is 42D0422 mfi0: 5471 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) mfi0: 5472 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) Info: enclPd=ffff, scsiType=0, portMap=01, sasAddr=5000c500138d842d,0000000000000000 mfi0: 5473 (boot + 89s/0x0002/info) - PD 09(e0xff/s9) FRU is 42D0422 mfi0: 5474 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) mfi0: 5475 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) Info: enclPd=ffff, scsiType=0, portMap=04, sasAddr=5000c500138d7d75,0000000000000000 mfi0: 5476 (boot + 89s/0x0002/info) - PD 0a(e0xff/s10) FRU is 42D0422 mfi0: 5477 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) mfi0: 5478 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) Info: enclPd=ffff, scsiType=0, portMap=05, sasAddr=5000c500138d7835,0000000000000000 mfi0: 5479 (boot + 89s/0x0002/info) - PD 0b(e0xff/s11) FRU is 42D0422 mfi0: 5480 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) mfi0: 5481 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) Info: enclPd=ffff, scsiType=0, portMap=02, sasAddr=5000c500138d60b5,0000000000000000 mfi0: 5482 (boot + 89s/0x0002/info) - PD 0c(e0xff/s12) FRU is 42D0422 mfi0: 5483 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) mfi0: 5484 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) Info: enclPd=ffff, scsiType=0, portMap=03, sasAddr=5000c500138d7bdd,0000000000000000 mfi0: 5485 (boot + 89s/0x0002/info) - PD 0d(e0xff/s13) FRU is 42D0422 mfi0: 5486 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) mfi0: 5487 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) Info: enclPd=ffff, scsiType=0, portMap=06, sasAddr=5000c500138d6839,0000000000000000 mfi0: 5488 (boot + 89s/0x0002/info) - PD 0e(e0xff/s14) FRU is 42D0422 mfi0: 5489 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) mfi0: 5490 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) Info: enclPd=ffff, scsiType=0, portMap=07, sasAddr=5000c500138d5e8d,0000000000000000 mfi0: 5491 (boot + 89s/0x0002/info) - PD 0f(e0xff/s15) FRU is 42D0422 mfi0: 5492 (boot + 144s/0x0008/info) - Battery temperature is normal mfi0: 5493 (308391152s/0x0020/info) - Time established as 10/09/09 8:12:32; (256 seconds since power on) mfi0: 5494 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/0364/1014) mfi0: 5495 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 mfi0: 5496 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/0364/1014) mfi0: 5497 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 mfi0: 5498 (boot + 64s/0x0008/info) - Battery Present mfi0: 5499 (boot + 64s/0x0020/info) - BBU FRU is mfi0: 5500 (boot + 64s/0x0020/info) - Board Revision mfi0: 5501 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) mfi0: 5502 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) Info: enclPd=ffff, scsiType=0, portMap=00, sasAddr=5000c500138d46b5,0000000000000000 mfi0: 5503 (boot + 89s/0x0002/info) - PD 08(e0xff/s8) FRU is 42D0422 mfi0: 5504 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) mfi0: 5505 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) Info: enclPd=ffff, scsiType=0, portMap=01, sasAddr=5000c500138d842d,0000000000000000 mfi0: 5506 (boot + 89s/0x0002/info) - PD 09(e0xff/s9) FRU is 42D0422 mfi0: 5507 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) mfi0: 5508 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) Info: enclPd=ffff, scsiType=0, portMap=04, sasAddr=5000c500138d7d75,0000000000000000 mfi0: 5509 (boot + 89s/0x0002/info) - PD 0a(e0xff/s10) FRU is 42D0422 mfi0: 5510 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) mfi0: 5511 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) Info: enclPd=ffff, scsiType=0, portMap=05, sasAddr=5000c500138d7835,0000000000000000 mfi0: 5512 (boot + 89s/0x0002/info) - PD 0b(e0xff/s11) FRU is 42D0422 mfi0: 5513 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) mfi0: 5514 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) Info: enclPd=ffff, scsiType=0, portMap=02, sasAddr=5000c500138d60b5,0000000000000000 mfi0: 5515 (boot + 89s/0x0002/info) - PD 0c(e0xff/s12) FRU is 42D0422 mfi0: 5516 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) mfi0: 5517 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) Info: enclPd=ffff, scsiType=0, portMap=03, sasAddr=5000c500138d7bdd,0000000000000000 mfi0: 5518 (boot + 89s/0x0002/info) - PD 0d(e0xff/s13) FRU is 42D0422 mfi0: 5519 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) mfi0: 5520 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) Info: enclPd=ffff, scsiType=0, portMap=06, sasAddr=5000c500138d6839,0000000000000000 mfi0: 5521 (boot + 89s/0x0002/info) - PD 0e(e0xff/s14) FRU is 42D0422 mfi0: 5522 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) mfi0: 5523 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) Info: enclPd=ffff, scsiType=0, portMap=07, sasAddr=5000c500138d5e8d,0000000000000000 mfi0: 5524 (boot + 89s/0x0002/info) - PD 0f(e0xff/s15) FRU is 42D0422 mfi0: 5525 (boot + 144s/0x0008/info) - Battery temperature is normal mfi0: 5526 (308391765s/0x0020/info) - Time established as 10/09/09 8:22:45; (257 seconds since power on) mfi0: 5527 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/0364/1014) mfi0: 5528 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 mfi0: 5529 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/0364/1014) mfi0: 5530 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 mfi0: 5531 (boot + 64s/0x0008/info) - Battery Present mfi0: 5532 (boot + 64s/0x0020/info) - BBU FRU is mfi0: 5533 (boot + 64s/0x0020/info) - Board Revision mfi0: 5534 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) mfi0: 5535 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) Info: enclPd=ffff, scsiType=0, portMap=00, sasAddr=5000c500138d46b5,0000000000000000 mfi0: 5536 (boot + 89s/0x0002/info) - PD 08(e0xff/s8) FRU is 42D0422 mfi0: 5537 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) mfi0: 5538 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) Info: enclPd=ffff, scsiType=0, portMap=01, sasAddr=5000c500138d842d,0000000000000000 mfi0: 5539 (boot + 89s/0x0002/info) - PD 09(e0xff/s9) FRU is 42D0422 mfi0: 5540 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) mfi0: 5541 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) Info: enclPd=ffff, scsiType=0, portMap=04, sasAddr=5000c500138d7d75,0000000000000000 mfi0: 5542 (boot + 89s/0x0002/info) - PD 0a(e0xff/s10) FRU is 42D0422 mfi0: 5543 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) mfi0: 5544 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) Info: enclPd=ffff, scsiType=0, portMap=05, sasAddr=5000c500138d7835,0000000000000000 mfi0: 5545 (boot + 89s/0x0002/info) - PD 0b(e0xff/s11) FRU is 42D0422 mfi0: 5546 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) mfi0: 5547 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) Info: enclPd=ffff, scsiType=0, portMap=02, sasAddr=5000c500138d60b5,0000000000000000 mfi0: 5548 (boot + 89s/0x0002/info) - PD 0c(e0xff/s12) FRU is 42D0422 mfi0: 5549 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) mfi0: 5550 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) Info: enclPd=ffff, scsiType=0, portMap=03, sasAddr=5000c500138d7bdd,0000000000000000 mfi0: 5551 (boot + 89s/0x0002/info) - PD 0d(e0xff/s13) FRU is 42D0422 mfi0: 5552 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) mfi0: 5553 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) Info: enclPd=ffff, scsiType=0, portMap=06, sasAddr=5000c500138d6839,0000000000000000 mfi0: 5554 (boot + 89s/0x0002/info) - PD 0e(e0xff/s14) FRU is 42D0422 mfi0: 5555 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) mfi0: 5556 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) Info: enclPd=ffff, scsiType=0, portMap=07, sasAddr=5000c500138d5e8d,0000000000000000 mfi0: 5557 (boot + 89s/0x0002/info) - PD 0f(e0xff/s15) FRU is 42D0422 mfi0: 5558 (boot + 144s/0x0008/info) - Battery temperature is normal mfi0: 5559 (308392379s/0x0020/info) - Time established as 10/09/09 8:32:59; (258 seconds since power on) mfi0: 5560 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/0364/1014) mfi0: 5561 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 mfi0: 5562 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 006 0/1000/0364/1014) mfi0: 5563 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 mfi0: 5564 (boot + 64s/0x0008/info) - Battery Present mfi0: 5565 (boot + 64s/0x0020/info) - BBU FRU is mfi0: 5566 (boot + 64s/0x0020/info) - Board Revision mfi0: 5567 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) mfi0: 5568 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) Info: enclPd=ffff, scsiType=0, portMap=00, sasAddr=5000c500138d46b5,0000000000000000 mfi0: 5569 (boot + 89s/0x0002/info) - PD 08(e0xff/s8) FRU is 42D0422 mfi0: 5570 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) mfi0: 5571 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) Info: enclPd=ffff, scsiType=0, portMap=01, sasAddr=5000c500138d842d,0000000000000000 mfi0: 5572 (boot + 89s/0x0002/info) - PD 09(e0xff/s9) FRU is 42D0422 mfi0: 5573 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) mfi0: 5574 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) Info: enclPd=ffff, scsiType=0, portMap=04, sasAddr=5000c500138d7d75,0000000000000000 mfi0: 5575 (boot + 89s/0x0002/info) - PD 0a(e0xff/s10) FRU is 42D0422 mfi0: 5576 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) mfi0: 5577 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) Info: enclPd=ffff, scsiType=0, portMap=05, sasAddr=5000c500138d7835,0000000000000000 mfi0: 5578 (boot + 89s/0x0002/info) - PD 0b(e0xff/s11) FRU is 42D0422 mfi0: 5579 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) mfi0: 5580 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) Info: enclPd=ffff, scsiType=0, portMap=02, sasAddr=5000c500138d60b5,0000000000000000 mfi0: 5581 (boot + 89s/0x0002/info) - PD 0c(e0xff/s12) FRU is 42D0422 mfi0: 5582 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) mfi0: 5583 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) Info: enclPd=ffff, scsiType=0, portMap=03, sasAddr=5000c500138d7bdd,0000000000000000 mfi0: 5584 (boot + 89s/0x0002/info) - PD 0d(e0xff/s13) FRU is 42D0422 mfi0: 5585 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) mfi0: 5586 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) Info: enclPd=ffff, scsiType=0, portMap=06, sasAddr=5000c500138d6839,0000000000000000 mfi0: 5587 (boot + 89s/0x0002/info) - PD 0e(e0xff/s14) FRU is 42D0422 mfi0: 5588 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) mfi0: 5589 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) Info: enclPd=ffff, scsiType=0, portMap=07, sasAddr=5000c500138d5e8d,0000000000000000 mfi0: 5590 (boot + 89s/0x0002/info) - PD 0f(e0xff/s15) FRU is 42D0422 mfi0: 5591 (boot + 144s/0x0008/info) - Battery temperature is normal mfi0: 5592 (308392995s/0x0020/info) - Time established as 10/09/09 8:43:15; (259 seconds since power on) mfi0: 5593 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/0364/1014) mfi0: 5594 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 mfi0: 5595 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/0364/1014) mfi0: 5596 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 mfi0: 5597 (boot + 64s/0x0008/info) - Battery Present mfi0: 5598 (boot + 64s/0x0020/info) - BBU FRU is mfi0: 5599 (boot + 64s/0x0020/info) - Board Revision mfi0: 5600 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) mfi0: 5601 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) Info: enclPd=ffff, scsiType=0, portMap=00, sasAddr=5000c500138d46b5,0000000000000000 mfi0: 5602 (boot + 89s/0x0002/info) - PD 08(e0xff/s8) FRU is 42D0422 mfi0: 5603 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) mfi0: 5604 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) Info: enclPd=ffff, scsiType=0, portMap=01, sasAddr=5000c500138d842d,0000000000000000 mfi0: 5605 (boot + 89s/0x0002/info) - PD 09(e0xff/s9) FRU is 42D0422 mfi0: 5606 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) mfi0: 5607 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) Info: enclPd=ffff, scsiType=0, portMap=04, sasAddr=5000c500138d7d75,0000000000000000 mfi0: 5608 (boot + 89s/0x0002/info) - PD 0a(e0xff/s10) FRU is 42D0422 mfi0: 5609 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) mfi0: 5610 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) Info: enclPd=ffff, scsiType=0, portMap=05, sasAddr=5000c500138d7835,0000000000000000 mfi0: 5611 (boot + 89s/0x0002/info) - PD 0b(e0xff/s11) FRU is 42D0422 mfi0: 5612 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) mfi0: 5613 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) Info: enclPd=ffff, scsiType=0, portMap=02, sasAddr=5000c500138d60b5,0000000000000000 mfi0: 5614 (boot + 89s/0x0002/info) - PD 0c(e0xff/s12) FRU is 42D0422 mfi0: 5615 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) mfi0: 5616 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) Info: enclPd=ffff, scsiType=0, portMap=03, sasAddr=5000c500138d7bdd,0000000000000000 mfi0: 5617 (boot + 89s/0x0002/info) - PD 0d(e0xff/s13) FRU is 42D0422 mfi0: 5618 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) mfi0: 5619 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) Info: enclPd=ffff, scsiType=0, portMap=06, sasAddr=5000c500138d6839,0000000000000000 mfi0: 5620 (boot + 89s/0x0002/info) - PD 0e(e0xff/s14) FRU is 42D0422 mfi0: 5621 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) mfi0: 5622 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) Info: enclPd=ffff, scsiType=0, portMap=07, sasAddr=5000c500138d5e8d,0000000000000000 mfi0: 5623 (boot + 89s/0x0002/info) - PD 0f(e0xff/s15) FRU is 42D0422 mfi0: 5624 (boot + 144s/0x0008/info) - Battery temperature is normal mfi0: 5625 (308393612s/0x0020/info) - Time established as 10/09/09 8:53:32; (261 seconds since power on) mfi0: 5626 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/0364/1014) mfi0: 5627 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 mfi0: 5628 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/0364/1014) mfi0: 5629 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 mfi0: 5630 (boot + 64s/0x0008/info) - Battery Present mfi0: 5631 (boot + 64s/0x0020/info) - BBU FRU is mfi0: 5632 (boot + 64s/0x0020/info) - Board Revision mfi0: 5633 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) mfi0: 5634 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) Info: enclPd=ffff, scsiType=0, portMap=00, sasAddr=5000c500138d46b5,0000000000000000 mfi0: 5635 (boot + 89s/0x0002/info) - PD 08(e0xff/s8) FRU is 42D0422 mfi0: 5636 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) mfi0: 5637 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) Info: enclPd=ffff, scsiType=0, portMap=01, sasAddr=5000c500138d842d,0000000000000000 mfi0: 5638 (boot + 89s/0x0002/info) - PD 09(e0xff/s9) FRU is 42D0422 mfi0: 5639 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) mfi0: 5640 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) Info: enclPd=ffff, scsiType=0, portMap=04, sasAddr=5000c500138d7d75,0000000000000000 mfi0: 5641 (boot + 89s/0x0002/info) - PD 0a(e0xff/s10) FRU is 42D0422 mfi0: 5642 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) mfi0: 5643 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) Info: enclPd=ffff, scsiType=0, portMap=05, sasAddr=5000c500138d7835,0000000000000000 mfi0: 5644 (boot + 89s/0x0002/info) - PD 0b(e0xff/s11) FRU is 42D0422 mfi0: 5645 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) mfi0: 5646 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) Info: enclPd=ffff, scsiType=0, portMap=02, sasAddr=5000c500138d60b5,0000000000000000 mfi0: 5647 (boot + 89s/0x0002/info) - PD 0c(e0xff/s12) FRU is 42D0422 mfi0: 5648 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) mfi0: 5649 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) Info: enclPd=ffff, scsiType=0, portMap=03, sasAddr=5000c500138d7bdd,0000000000000000 mfi0: 5650 (boot + 89s/0x0002/info) - PD 0d(e0xff/s13) FRU is 42D0422 mfi0: 5651 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) mfi0: 5652 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) Info: enclPd=ffff, scsiType=0, portMap=06, sasAddr=5000c500138d6839,0000000000000000 mfi0: 5653 (boot + 89s/0x0002/info) - PD 0e(e0xff/s14) FRU is 42D0422 mfi0: 5654 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) mfi0: 5655 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) Info: enclPd=ffff, scsiType=0, portMap=07, sasAddr=5000c500138d5e8d,0000000000000000 mfi0: 5656 (boot + 89s/0x0002/info) - PD 0f(e0xff/s15) FRU is 42D0422 mfi0: 5657 (boot + 144s/0x0008/info) - Battery temperature is normal mfi0: 5658 (308394231s/0x0020/info) - Time established as 10/09/09 9:03:51; (262 seconds since power on) mfi0: 5659 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/0364/1014) mfi0: 5660 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 mfi0: 5661 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/0364/1014) mfi0: 5662 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 mfi0: 5663 (boot + 64s/0x0008/info) - Battery Present mfi0: 5664 (boot + 64s/0x0020/info) - BBU FRU is mfi0: 5665 (boot + 64s/0x0020/info) - Board Revision mfi0: 5666 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) mfi0: 5667 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) Info: enclPd=ffff, scsiType=0, portMap=00, sasAddr=5000c500138d46b5,0000000000000000 So on. -- wbr, pluknet From owner-freebsd-scsi@FreeBSD.ORG Thu Oct 15 10:38:10 2009 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id D462A106566C; Thu, 15 Oct 2009 10:38:10 +0000 (UTC) (envelope-from pluknet@gmail.com) Received: from mail-fx0-f222.google.com (mail-fx0-f222.google.com [209.85.220.222]) by mx1.freebsd.org (Postfix) with ESMTP id AD4228FC15; Thu, 15 Oct 2009 10:38:09 +0000 (UTC) Received: by fxm22 with SMTP id 22so892893fxm.36 for ; Thu, 15 Oct 2009 03:38:08 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:received:in-reply-to:references :date:message-id:subject:from:to:content-type; bh=W5YFI8/7dcXRAArtY9UqhRMsdiZX9kgcZJNMH6Lyg38=; b=ZBopWIs8xvy4sLcVNpjcBlkoCQ+vyd/0RxOVu6D+JDSpXr2R+Dp7aZAjxSm7RoIPZW hHgKUbmHW9MzV2NWieJZZ7prAygrO/a0ddGXG6HkayQjiTMoTAhz/KEFcaQ7oY2JPnv+ LVfb+Sjd49I3snPymmHoKbWW1YFJG6LdIQmZQ= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :content-type; b=tQZXD2c+NPht7d9NQBDfjzzPQedQzVKQc7pqskGze2wyThqmX1ZlXEEMlD8q4OrNxv bnNqOifKtxD7xo7H0G85XYib5wVxdNhobwqZyqPkTztiUvXoRAqJcr8G2XyboYXgPWeK 8uzg889PO9rkBwIJ6bhMaRucCcUxXZLYn/H7g= MIME-Version: 1.0 Received: by 10.204.152.154 with SMTP id g26mr7982620bkw.54.1255603088402; Thu, 15 Oct 2009 03:38:08 -0700 (PDT) In-Reply-To: References: Date: Thu, 15 Oct 2009 14:38:08 +0400 Message-ID: From: pluknet To: freebsd-stable , freebsd-scsi Content-Type: text/plain; charset=ISO-8859-1 Cc: Subject: Re: mfi(4) endless loop kernel output on attach X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 15 Oct 2009 10:38:11 -0000 2009/10/15 pluknet : > Hi. > > This is 7.2-R. Seen on IBM x3650M2. > > During the boot I get those endless looping kernel messages while on > mfi(4) attach phase. > It's getting more odd since 7.2 booted and worked fine on exactly this > server model > months ago (on different box though).. Any hints? > After the looked endless loop the kernel eventually finished the mfi(4) initialization and continued its booting. Is it expected to do so long initialization? Almost at the end of kernel boot / near to multiuser start it panicked with: panic: invalid ife->ifm_data (0xa) in mii_phy_setmedia Though that's offtopic here. >From last part of dmesg: mfi0: 29365 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/0364/1014) mfi0: 29366 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 mfi0: 29367 (boot + 64s/0x0008/info) - Battery Present mfi0: 29368 (boot + 64s/0x0020/info) - BBU FRU is mfi0: 29369 (boot + 64s/0x0020/info) - Board Revision mfi0: 29370 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) mfi0: 29371 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) Info: enclPd=ffff, scsiType=0, portMap=00, sasAddr=5000c500138d46b5,0000000000000000 mfi0: 29372 (boot + 89s/0x0002/info) - PD 08(e0xff/s8) FRU is 42D0422 mfi0: 29373 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) mfi0: 29374 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) Info: enclPd=ffff, scsiType=0, portMap=01, sasAddr=5000c500138d842d,0000000000000000 mfi0: 29375 (boot + 89s/0x0002/info) - PD 09(e0xff/s9) FRU is 42D0422 mfi0: 29376 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) mfi0: 29377 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) Info: enclPd=ffff, scsiType=0, portMap=04, sasAddr=5000c500138d7d75,0000000000000000 mfi0: 29378 (boot + 89s/0x0002/info) - PD 0a(e0xff/s10) FRU is 42D0422 mfi0: 29379 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) mfi0: 29380 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) Info: enclPd=ffff, scsiType=0, portMap=05, sasAddr=5000c500138d7835,0000000000000000 mfi0: 29381 (boot + 89s/0x0002/info) - PD 0b(e0xff/s11) FRU is 42D0422 mfi0: 29382 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) mfi0: 29383 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) Info: enclPd=ffff, scsiType=0, portMap=02, sasAddr=5000c500138d60b5,0000000000000000 mfi0: 29384 (boot + 89s/0x0002/info) - PD 0c(e0xff/s12) FRU is 42D0422 mfi0: 29385 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) mfi0: 29386 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) Info: enclPd=ffff, scsiType=0, portMap=03, sasAddr=5000c500138d7bdd,0000000000000000 mfi0: 29387 (boot + 89s/0x0002/info) - PD 0d(e0xff/s13) FRU is 42D0422 mfi0: 29388 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) mfi0: 29389 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) Info: enclPd=ffff, scsiType=0, portMap=06, sasAddr=5000c500138d6839,0000000000000000 mfi0: 29390 (boot + 89s/0x0002/info) - PD 0e(e0xff/s14) FRU is 42D0422 mfi0: 29391 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) mfi0: 29392 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) Info: enclPd=ffff, scsiType=0, portMap=07, sasAddr=5000c500138d5e8d,0000000000000000 mfi0: 29393 (boot + 89s/0x0002/info) - PD 0f(e0xff/s15) FRU is 42D0422 mfi0: 29394 (boot + 144s/0x0008/info) - Battery temperature is normal ioapic0: routing intpin 16 (PCI IRQ 16) to vector 52 mfi0: [MPSAFE] mfi0: [ITHREAD] pcib8: irq 16 at device 28.4 on pci0 pcib8: domain 0 pcib8: secondary bus 6 pcib8: subordinate bus 10 pcib8: I/O decode 0xf000-0xfff pcib8: memory decode 0x97000000-0x978fffff pcib8: prefetched decode 0x96000000-0x96ffffff pci6: on pcib8 pci6: domain=0, physical bus=6 found-> vendor=0x101b, dev=0x0452, revid=0x01 domain=0, bus=6, slot=0, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 2 messages, 64 bit pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 16 pcib8: slot 0 INTA is routed to irq 16 pcib9: irq 16 at device 0.0 on pci6 pcib9: domain 0 pcib9: secondary bus 7 pcib9: subordinate bus 7 pcib9: I/O decode 0xf000-0xfff pcib9: memory decode 0x97000000-0x978fffff pcib9: prefetched decode 0x96000000-0x96ffffff pci7: on pcib9 pci7: domain=0, physical bus=7 found-> vendor=0x102b, dev=0x0530, revid=0x00 domain=0, bus=7, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x20 (8000 ns) intpin=a, irq=11 powerspec 1 supports D0 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0x96000000, size 24, enabled pcib9: requested memory range 0x96000000-0x96ffffff: good pcib8: requested memory range 0x96000000-0x96ffffff: good map[14]: type Memory, range 32, base 0x97800000, size 14, enabled pcib9: requested memory range 0x97800000-0x97803fff: good pcib8: requested memory range 0x97800000-0x97803fff: good map[18]: type Memory, range 32, base 0x97000000, size 23, enabled pcib9: requested memory range 0x97000000-0x977fffff: good pcib8: requested memory range 0x97000000-0x977fffff: good pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 16 pcib8: slot 0 INTA is routed to irq 16 pcib9: slot 0 INTA is routed to irq 16 vgapci0: mem 0x96000000-0x96ffffff,0x97800000-0x97803fff,0x97000000-0x977fffff irq 16 at device 0.0 on pci7 uhci2: port 0x2060-0x207f irq 17 at device 29.0 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2060 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb3: on uhci2 usb3: USB revision 1.0 uhub3: on usb3 uhub3: 2 ports with 2 removable, self powered uhci3: port 0x2040-0x205f irq 18 at device 29.1 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2040 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb4: on uhci3 usb4: USB revision 1.0 uhub4: on usb4 uhub4: 2 ports with 2 removable, self powered uhci4: port 0x2020-0x203f irq 19 at device 29.2 on pci0 uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2020 uhci4: [GIANT-LOCKED] uhci4: [ITHREAD] usb5: on uhci4 usb5: USB revision 1.0 uhub5: on usb5 uhub5: 2 ports with 2 removable, self powered ehci1: mem 0x97a21000-0x97a213ff irq 17 at device 29.7 on pci0 ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0x97a21000 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] usb6: EHCI version 1.0 usb6: companion controllers, 2 ports each: usb3 usb4 usb5 usb6: on ehci1 usb6: USB revision 2.0 uhub6: on usb6 uhub6: 6 ports with 6 removable, self powered usb6: handing over full speed device on port 2 to usb3 uhub6: port 2, device disappeared after reset pcib10: at device 30.0 on pci0 pcib10: domain 0 pcib10: secondary bus 41 pcib10: subordinate bus 45 pcib10: I/O decode 0x0-0x0 pcib10: no prefetched decode pcib10: Subtractively decoded bridge. pci41: on pcib10 pci41: domain=0, physical bus=41 isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x20f0-0x20ff,0x20e0-0x20ef irq 16 at device 31.2 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x20f0 atapci0: Reserved 0x10 bytes for rid 0x24 type 4 at 0x20e0 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=00 ostat1=00 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: reset tp2 stat0=00 stat1=00 devices=0xc ioapic0: routing intpin 14 (ISA IRQ 14) to vector 53 ata0: [MPSAFE] ata0: [ITHREAD] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=7f ostat1=7f ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat1=0x7f err=0xff lsb=0xff msb=0xff ata1: reset tp2 stat0=ff stat1=ff devices=0x0 ioapic0: routing intpin 15 (ISA IRQ 15) to vector 54 ata1: [MPSAFE] ata1: [ITHREAD] pci0: at device 31.3 (no driver attached) atapci1: port 0x2108-0x210f,0x2124-0x2127,0x2100-0x2107,0x2120-0x2123,0x20d0-0x20df,0x20c0-0x20cf irq 21 at device 31.5 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x20d0 ioapic0: routing intpin 21 (PCI IRQ 21) to vector 55 atapci1: [MPSAFE] atapci1: [ITHREAD] atapci1: Reserved 0x10 bytes for rid 0x24 type 4 at 0x20c0 ata2: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x2108 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x2124 ata2: reset tp1 mask=03 ostat0=7f ostat1=7f ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff ata2: stat1=0x7f err=0xff lsb=0xff msb=0xff ata2: reset tp2 stat0=ff stat1=ff devices=0x0 ata2: [MPSAFE] ata2: [ITHREAD] ata3: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x2100 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x2120 ata3: reset tp1 mask=03 ostat0=7f ostat1=7f ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff ata3: reset tp2 stat0=ff stat1=ff devices=0x0 ata3: [MPSAFE] ata3: [ITHREAD] sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A, console ioapic0: routing intpin 4 (ISA IRQ 4) to vector 56 sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0 0 0 0 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0 0 0 0 sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ioapic0: routing intpin 3 (ISA IRQ 3) to vector 57 sio1: [FILTER] cpu0: on acpi0 cpu0: switching to generic Cx mode est0: on cpu0 est0: Invalid id16 (set, cur) = (16, 17) est0: Invalid freq 2128, ignored. est0: Invalid id16 (set, cur) = (15, 17) est0: Invalid freq 1995, ignored. est0: Invalid id16 (set, cur) = (14, 17) est0: Invalid freq 1862, ignored. est0: Invalid id16 (set, cur) = (13, 17) est0: Invalid freq 1729, ignored. est0: Invalid id16 (set, cur) = (12, 17) est0: Invalid freq 1596, ignored. p4tcc0: on cpu0 cpu1: on acpi0 est1: on cpu1 est1: Invalid id16 (set, cur) = (16, 17) est1: Invalid freq 2128, ignored. est1: Invalid id16 (set, cur) = (15, 17) est1: Invalid freq 1995, ignored. est1: Invalid id16 (set, cur) = (14, 17) est1: Invalid freq 1862, ignored. est1: Invalid id16 (set, cur) = (13, 17) est1: Invalid freq 1729, ignored. est1: Invalid id16 (set, cur) = (12, 17) est1: Invalid freq 1596, ignored. p4tcc1: on cpu1 cpu2: on acpi0 est2: on cpu2 est2: Invalid id16 (set, cur) = (16, 17) est2: Invalid freq 2128, ignored. est2: Invalid id16 (set, cur) = (15, 17) est2: Invalid freq 1995, ignored. est2: Invalid id16 (set, cur) = (14, 17) est2: Invalid freq 1862, ignored. est2: Invalid id16 (set, cur) = (13, 17) est2: Invalid freq 1729, ignored. est2: Invalid id16 (set, cur) = (12, 17) est2: Invalid freq 1596, ignored. p4tcc2: on cpu2 cpu3: on acpi0 est3: on cpu3 est3: Invalid id16 (set, cur) = (16, 17) est3: Invalid freq 2128, ignored. est3: Invalid id16 (set, cur) = (15, 17) est3: Invalid freq 1995, ignored. est3: Invalid id16 (set, cur) = (14, 17) est3: Invalid freq 1862, ignored. est3: Invalid id16 (set, cur) = (13, 17) est3: Invalid freq 1729, ignored. est3: Invalid id16 (set, cur) = (12, 17) est3: Invalid freq 1596, ignored. p4tcc3: on cpu3 cpu4: on acpi0 est4: on cpu4 est4: Invalid id16 (set, cur) = (16, 17) est4: Invalid freq 2128, ignored. est4: Invalid id16 (set, cur) = (15, 17) est4: Invalid freq 1995, ignored. est4: Invalid id16 (set, cur) = (14, 17) est4: Invalid freq 1862, ignored. est4: Invalid id16 (set, cur) = (13, 17) est4: Invalid freq 1729, ignored. est4: Invalid id16 (set, cur) = (12, 17) est4: Invalid freq 1596, ignored. p4tcc4: on cpu4 cpu5: on acpi0 est5: on cpu5 est5: Invalid id16 (set, cur) = (16, 17) est5: Invalid freq 2128, ignored. est5: Invalid id16 (set, cur) = (15, 17) est5: Invalid freq 1995, ignored. est5: Invalid id16 (set, cur) = (14, 17) est5: Invalid freq 1862, ignored. est5: Invalid id16 (set, cur) = (13, 17) est5: Invalid freq 1729, ignored. est5: Invalid id16 (set, cur) = (12, 17) est5: Invalid freq 1596, ignored. p4tcc5: on cpu5 cpu6: on acpi0 est6: on cpu6 est6: Invalid id16 (set, cur) = (16, 17) est6: Invalid freq 2128, ignored. est6: Invalid id16 (set, cur) = (15, 17) est6: Invalid freq 1995, ignored. est6: Invalid id16 (set, cur) = (14, 17) est6: Invalid freq 1862, ignored. est6: Invalid id16 (set, cur) = (13, 17) est6: Invalid freq 1729, ignored. est6: Invalid id16 (set, cur) = (12, 17) est6: Invalid freq 1596, ignored. p4tcc6: on cpu6 cpu7: on acpi0 est7: on cpu7 est7: Invalid id16 (set, cur) = (16, 17) est7: Invalid freq 2128, ignored. est7: Invalid id16 (set, cur) = (15, 17) est7: Invalid freq 1995, ignored. est7: Invalid id16 (set, cur) = (14, 17) est7: Invalid freq 1862, ignored. est7: Invalid id16 (set, cur) = (13, 17) est7: Invalid freq 1729, ignored. est7: Invalid id16 (set, cur) = (12, 17) est7: Invalid freq 1596, ignored. p4tcc7: on cpu7 cpu8: on acpi0 est8: on cpu8 est8: Invalid id16 (set, cur) = (16, 17) est8: Invalid freq 2128, ignored. est8: Invalid id16 (set, cur) = (15, 17) est8: Invalid freq 1995, ignored. est8: Invalid id16 (set, cur) = (14, 17) est8: Invalid freq 1862, ignored. est8: Invalid id16 (set, cur) = (13, 17) est8: Invalid freq 1729, ignored. est8: Invalid id16 (set, cur) = (12, 17) est8: Invalid freq 1596, ignored. p4tcc8: on cpu8 cpu9: on acpi0 est9: on cpu9 est9: Invalid id16 (set, cur) = (16, 17) est9: Invalid freq 2128, ignored. est9: Invalid id16 (set, cur) = (15, 17) est9: Invalid freq 1995, ignored. est9: Invalid id16 (set, cur) = (14, 17) est9: Invalid freq 1862, ignored. est9: Invalid id16 (set, cur) = (13, 17) est9: Invalid freq 1729, ignored. est9: Invalid id16 (set, cur) = (12, 17) est9: Invalid freq 1596, ignored. p4tcc9: on cpu9 cpu10: on acpi0 est10: on cpu10 est10: Invalid id16 (set, cur) = (16, 17) est10: Invalid freq 2128, ignored. est10: Invalid id16 (set, cur) = (15, 17) est10: Invalid freq 1995, ignored. est10: Invalid id16 (set, cur) = (14, 17) est10: Invalid freq 1862, ignored. est10: Invalid id16 (set, cur) = (13, 17) est10: Invalid freq 1729, ignored. est10: Invalid id16 (set, cur) = (12, 17) est10: Invalid freq 1596, ignored. p4tcc10: on cpu10 cpu11: on acpi0 est11: on cpu11 est11: Invalid id16 (set, cur) = (16, 17) est11: Invalid freq 2128, ignored. est11: Invalid id16 (set, cur) = (15, 17) est11: Invalid freq 1995, ignored. est11: Invalid id16 (set, cur) = (14, 17) est11: Invalid freq 1862, ignored. est11: Invalid id16 (set, cur) = (13, 17) est11: Invalid freq 1729, ignored. est11: Invalid id16 (set, cur) = (12, 17) est11: Invalid freq 1596, ignored. p4tcc11: on cpu11 cpu12: on acpi0 est12: on cpu12 est12: Invalid id16 (set, cur) = (16, 17) est12: Invalid freq 2128, ignored. est12: Invalid id16 (set, cur) = (15, 17) est12: Invalid freq 1995, ignored. est12: Invalid id16 (set, cur) = (14, 17) est12: Invalid freq 1862, ignored. est12: Invalid id16 (set, cur) = (13, 17) est12: Invalid freq 1729, ignored. est12: Invalid id16 (set, cur) = (12, 17) est12: Invalid freq 1596, ignored. p4tcc12: on cpu12 cpu13: on acpi0 est13: on cpu13 est13: Invalid id16 (set, cur) = (16, 17) est13: Invalid freq 2128, ignored. est13: Invalid id16 (set, cur) = (15, 17) est13: Invalid freq 1995, ignored. est13: Invalid id16 (set, cur) = (14, 17) est13: Invalid freq 1862, ignored. est13: Invalid id16 (set, cur) = (13, 17) est13: Invalid freq 1729, ignored. est13: Invalid id16 (set, cur) = (12, 17) est13: Invalid freq 1596, ignored. p4tcc13: on cpu13 cpu14: on acpi0 est14: on cpu14 est14: Invalid id16 (set, cur) = (16, 17) est14: Invalid freq 2128, ignored. est14: Invalid id16 (set, cur) = (15, 17) est14: Invalid freq 1995, ignored. est14: Invalid id16 (set, cur) = (14, 17) est14: Invalid freq 1862, ignored. est14: Invalid id16 (set, cur) = (13, 17) est14: Invalid freq 1729, ignored. est14: Invalid id16 (set, cur) = (12, 17) est14: Invalid freq 1596, ignored. p4tcc14: on cpu14 cpu15: on acpi0 est15: on cpu15 est15: Invalid id16 (set, cur) = (16, 17) est15: Invalid freq 2128, ignored. est15: Invalid id16 (set, cur) = (15, 17) est15: Invalid freq 1995, ignored. est15: Invalid id16 (set, cur) = (14, 17) est15: Invalid freq 1862, ignored. est15: Invalid id16 (set, cur) = (13, 17) est15: Invalid freq 1729, ignored. est15: Invalid id16 (set, cur) = (12, 17) est15: Invalid freq 1596, ignored. p4tcc15: on cpu15 ex_isa_identify() sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it ahc_isa_probe 0: ioport 0xc00 alloc failed sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xc7fff,0xca800-0xd8fff on isa0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 004d atkbd: keyboard ID 0xffffffff (1) kbdc: RESET_KBD return code:ffffffff kbdc: RESET_KBD return code:ffffffff kbdc: RESET_KBD return code:ffffffff kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 atkbd: failed to reset the keyboard. kbd0 at atkbd0 kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 58 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:004d kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:ffffffff kbdc: RESET_AUX return code:ffffffff kbdc: RESET_AUX return code:ffffffff kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0: failed to probe at irq 7 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isa_probe_children: probing PnP devices cdce0: on uhub3 cdce0: faking MAC address cdce0: WARNING: using obsoleted IFF_NEEDSGIANT flag cdce0: bpf attached cdce0: Ethernet address: 2a:00:00:00:00:00 Device configuration finished. Reducing kern.maxvnodes 382450 -> 100000 procfs registered lapic: Divisor 2, Frequency 66669284 hz Timecounter "TSC" frequency 2266755720 Hz quality -100 Timecounters tick every 1.000 msec ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding enabled, default to accept, logging limited to 500 packets/entry by default lo0: bpf attached hptrr: no controller detected. bce0: link state changed to DOWN bce1: link state changed to DOWN ata0: reiniting channel .. ata0: reset tp1 mask=03 ostat0=00 ostat1=00 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: reset tp2 stat0=00 stat1=00 devices=0xc ata0: reinit done .. Expensive timeout(9) function: 0xffffffff80267220(0xffffff000414c000) 1.400657904 s ata0: reiniting channel .. ata0: reset tp1 mask=03 ostat0=00 ostat1=00 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: reset tp2 stat0=00 stat1=00 devices=0xc ata0: reinit done .. ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: CDRW drive at ata0 as master acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, SATA150 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc mfi0: 29395 (308927984s/0x0020/info) - Time established as 10/15/09 13:19:44; (210 seconds since power on) ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 SMP: AP CPU #4 Launched! cpu4 AP: ID: 0x04000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 SMP: AP CPU #10 Launched! cpu10 AP: ID: 0x12000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 SMP: AP CPU #13 Launched! cpu13 AP: ID: 0x15000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 SMP: AP CPU #5 Launched! cpu5 AP: ID: 0x05000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 SMP: AP CPU #7 Launched! cpu7 AP: ID: 0x07000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 SMP: AP CPU #15 Launched! cpu15 AP: ID: 0x17000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 SMP: AP CPU #14 Launched! cpu14 AP: ID: 0x16000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 SMP: AP CPU #6 Launched! cpu6 AP: ID: 0x06000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 SMP: AP CPU #2 Launched! cpu2 AP: ID: 0x02000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 SMP: AP CPU #9 Launched! cpu9 AP: ID: 0x11000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 SMP: AP CPU #12 Launched! cpu12 AP: ID: 0x14000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 SMP: AP CPU #3 Launched! cpu3 AP: ID: 0x03000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 SMP: AP CPU #8 Launched! cpu8 AP: ID: 0x10000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 SMP: AP CPU #11 Launched! cpu11 AP: ID: 0x13000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 ioapic0: Assigning ISA IRQ 1 to local APIC 0 ioapic0: Assigning ISA IRQ 3 to local APIC 2 ioapic0: Assigning ISA IRQ 4 to local APIC 4 ioapic0: Assigning ISA IRQ 9 to local APIC 6 ioapic0: Assigning ISA IRQ 14 to local APIC 16 ioapic0: Assigning ISA IRQ 15 to local APIC 18 ioapic0: Assigning PCI IRQ 16 to local APIC 20 ioapic0: Assigning PCI IRQ 17 to local APIC 22 ioapic0: Assigning PCI IRQ 18 to local APIC 0 ioapic0: Assigning PCI IRQ 19 to local APIC 2 ioapic0: Assigning PCI IRQ 21 to local APIC 4 msi: Assigning MSI IRQ 256 to local APIC 6 msi: Assigning MSI IRQ 257 to local APIC 16 WARNING: WITNESS option enabled, expect reduced performance. WARNING: DIAGNOSTIC option enabled, expect reduced performance. Trying to mount root from nfs:194.190.130.130:/home/jails/freebsd7.2 panic: invalid ife->ifm_data (0xa) in mii_phy_setmedia cpuid = 15 KDB: enter: panic [thread pid 1 tid 100001 ] Stopped at kdb_enter_why+0x3d: movq $0,0x649838(%rip) > mfi0: 5428 (boot + 3s/0x0020/info) - Firmware initialization started > (PCI ID 0060/1000/0364/1014) > mfi0: 5429 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 > mfi0: 5430 (boot + 3s/0x0020/info) - Firmware initialization started > (PCI ID 0060/1000/0364/1014) > mfi0: 5431 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 > mfi0: 5432 (boot + 64s/0x0008/info) - Battery Present > mfi0: 5433 (boot + 64s/0x0020/info) - BBU FRU is > mfi0: 5434 (boot + 64s/0x0020/info) - Board Revision > mfi0: 5435 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) > mfi0: 5436 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) Info: > enclPd=ffff, scsiType=0, portMap=00, > sasAddr=5000c500138d46b5,0000000000000000 > mfi0: 5437 (boot + 89s/0x0002/info) - PD 08(e0xff/s8) FRU is 42D0422 > mfi0: 5438 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) > mfi0: 5439 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) Info: > enclPd=ffff, scsiType=0, portMap=01, > sasAddr=5000c500138d842d,0000000000000000 > mfi0: 5440 (boot + 89s/0x0002/info) - PD 09(e0xff/s9) FRU is 42D0422 > mfi0: 5441 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) > mfi0: 5442 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) Info: > enclPd=ffff, scsiType=0, portMap=04, > sasAddr=5000c500138d7d75,0000000000000000 > mfi0: 5443 (boot + 89s/0x0002/info) - PD 0a(e0xff/s10) FRU is 42D0422 > mfi0: 5444 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) > mfi0: 5445 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) Info: > enclPd=ffff, scsiType=0, portMap=05, > sasAddr=5000c500138d7835,0000000000000000 > mfi0: 5446 (boot + 89s/0x0002/info) - PD 0b(e0xff/s11) FRU is 42D0422 > mfi0: 5447 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) > mfi0: 5448 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) Info: > enclPd=ffff, scsiType=0, portMap=02, > sasAddr=5000c500138d60b5,0000000000000000 > mfi0: 5449 (boot + 89s/0x0002/info) - PD 0c(e0xff/s12) FRU is 42D0422 > mfi0: 5450 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) > mfi0: 5451 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) Info: > enclPd=ffff, scsiType=0, portMap=03, > sasAddr=5000c500138d7bdd,0000000000000000 > mfi0: 5452 (boot + 89s/0x0002/info) - PD 0d(e0xff/s13) FRU is 42D0422 > mfi0: 5453 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) > mfi0: 5454 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) Info: > enclPd=ffff, scsiType=0, portMap=06, > sasAddr=5000c500138d6839,0000000000000000 > mfi0: 5455 (boot + 89s/0x0002/info) - PD 0e(e0xff/s14) FRU is 42D0422 > mfi0: 5456 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) > mfi0: 5457 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) Info: > enclPd=ffff, scsiType=0, portMap=07, > sasAddr=5000c500138d5e8d,0000000000000000 > mfi0: 5458 (boot + 89s/0x0002/info) - PD 0f(e0xff/s15) FRU is 42D0422 > mfi0: 5459 (boot + 144s/0x0008/info) - Battery temperature is normal > mfi0: 5460 (308390540s/0x0020/info) - Time established as 10/09/09 > 8:02:20; (256 seconds since power on) > mfi0: 5461 (boot + 3s/0x0020/info) - Firmware initialization started > (PCI ID 0060/1000/0364/1014) > mfi0: 5462 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 > mfi0: 5463 (boot + 3s/0x0020/info) - Firmware initialization started > (PCI ID 0060/1000/0364/1014) > mfi0: 5464 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 > mfi0: 5465 (boot + 64s/0x0008/info) - Battery Present > mfi0: 5466 (boot + 64s/0x0020/info) - BBU FRU is > mfi0: 5467 (boot + 64s/0x0020/info) - Board Revision > mfi0: 5468 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) > mfi0: 5469 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) Info: > enclPd=ffff, scsiType=0, portMap=00, > sasAddr=5000c500138d46b5,0000000000000000 > mfi0: 5470 (boot + 89s/0x0002/info) - PD 08(e0xff/s8) FRU is 42D0422 > mfi0: 5471 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) > mfi0: 5472 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) Info: > enclPd=ffff, scsiType=0, portMap=01, > sasAddr=5000c500138d842d,0000000000000000 > mfi0: 5473 (boot + 89s/0x0002/info) - PD 09(e0xff/s9) FRU is 42D0422 > mfi0: 5474 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) > mfi0: 5475 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) Info: > enclPd=ffff, scsiType=0, portMap=04, > sasAddr=5000c500138d7d75,0000000000000000 > mfi0: 5476 (boot + 89s/0x0002/info) - PD 0a(e0xff/s10) FRU is 42D0422 > mfi0: 5477 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) > mfi0: 5478 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) Info: > enclPd=ffff, scsiType=0, portMap=05, > sasAddr=5000c500138d7835,0000000000000000 > mfi0: 5479 (boot + 89s/0x0002/info) - PD 0b(e0xff/s11) FRU is 42D0422 > mfi0: 5480 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) > mfi0: 5481 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) Info: > enclPd=ffff, scsiType=0, portMap=02, > sasAddr=5000c500138d60b5,0000000000000000 > mfi0: 5482 (boot + 89s/0x0002/info) - PD 0c(e0xff/s12) FRU is 42D0422 > mfi0: 5483 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) > mfi0: 5484 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) Info: > enclPd=ffff, scsiType=0, portMap=03, > sasAddr=5000c500138d7bdd,0000000000000000 > mfi0: 5485 (boot + 89s/0x0002/info) - PD 0d(e0xff/s13) FRU is 42D0422 > mfi0: 5486 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) > mfi0: 5487 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) Info: > enclPd=ffff, scsiType=0, portMap=06, > sasAddr=5000c500138d6839,0000000000000000 > mfi0: 5488 (boot + 89s/0x0002/info) - PD 0e(e0xff/s14) FRU is 42D0422 > mfi0: 5489 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) > mfi0: 5490 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) Info: > enclPd=ffff, scsiType=0, portMap=07, > sasAddr=5000c500138d5e8d,0000000000000000 > mfi0: 5491 (boot + 89s/0x0002/info) - PD 0f(e0xff/s15) FRU is 42D0422 > mfi0: 5492 (boot + 144s/0x0008/info) - Battery temperature is normal > mfi0: 5493 (308391152s/0x0020/info) - Time established as 10/09/09 > 8:12:32; (256 seconds since power on) > mfi0: 5494 (boot + 3s/0x0020/info) - Firmware initialization started > (PCI ID 0060/1000/0364/1014) > mfi0: 5495 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 > mfi0: 5496 (boot + 3s/0x0020/info) - Firmware initialization started > (PCI ID 0060/1000/0364/1014) > mfi0: 5497 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 > mfi0: 5498 (boot + 64s/0x0008/info) - Battery Present > mfi0: 5499 (boot + 64s/0x0020/info) - BBU FRU is > mfi0: 5500 (boot + 64s/0x0020/info) - Board Revision > mfi0: 5501 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) > mfi0: 5502 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) Info: > enclPd=ffff, scsiType=0, portMap=00, > sasAddr=5000c500138d46b5,0000000000000000 > mfi0: 5503 (boot + 89s/0x0002/info) - PD 08(e0xff/s8) FRU is 42D0422 > mfi0: 5504 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) > mfi0: 5505 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) Info: > enclPd=ffff, scsiType=0, portMap=01, > sasAddr=5000c500138d842d,0000000000000000 > mfi0: 5506 (boot + 89s/0x0002/info) - PD 09(e0xff/s9) FRU is 42D0422 > mfi0: 5507 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) > mfi0: 5508 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) Info: > enclPd=ffff, scsiType=0, portMap=04, > sasAddr=5000c500138d7d75,0000000000000000 > mfi0: 5509 (boot + 89s/0x0002/info) - PD 0a(e0xff/s10) FRU is 42D0422 > mfi0: 5510 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) > mfi0: 5511 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) Info: > enclPd=ffff, scsiType=0, portMap=05, > sasAddr=5000c500138d7835,0000000000000000 > mfi0: 5512 (boot + 89s/0x0002/info) - PD 0b(e0xff/s11) FRU is 42D0422 > mfi0: 5513 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) > mfi0: 5514 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) Info: > enclPd=ffff, scsiType=0, portMap=02, > sasAddr=5000c500138d60b5,0000000000000000 > mfi0: 5515 (boot + 89s/0x0002/info) - PD 0c(e0xff/s12) FRU is 42D0422 > mfi0: 5516 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) > mfi0: 5517 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) Info: > enclPd=ffff, scsiType=0, portMap=03, > sasAddr=5000c500138d7bdd,0000000000000000 > mfi0: 5518 (boot + 89s/0x0002/info) - PD 0d(e0xff/s13) FRU is 42D0422 > mfi0: 5519 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) > mfi0: 5520 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) Info: > enclPd=ffff, scsiType=0, portMap=06, > sasAddr=5000c500138d6839,0000000000000000 > mfi0: 5521 (boot + 89s/0x0002/info) - PD 0e(e0xff/s14) FRU is 42D0422 > mfi0: 5522 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) > mfi0: 5523 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) Info: > enclPd=ffff, scsiType=0, portMap=07, > sasAddr=5000c500138d5e8d,0000000000000000 > mfi0: 5524 (boot + 89s/0x0002/info) - PD 0f(e0xff/s15) FRU is 42D0422 > mfi0: 5525 (boot + 144s/0x0008/info) - Battery temperature is normal > mfi0: 5526 (308391765s/0x0020/info) - Time established as 10/09/09 > 8:22:45; (257 seconds since power on) > mfi0: 5527 (boot + 3s/0x0020/info) - Firmware initialization started > (PCI ID 0060/1000/0364/1014) > mfi0: 5528 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 > mfi0: 5529 (boot + 3s/0x0020/info) - Firmware initialization started > (PCI ID 0060/1000/0364/1014) > mfi0: 5530 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 > mfi0: 5531 (boot + 64s/0x0008/info) - Battery Present > mfi0: 5532 (boot + 64s/0x0020/info) - BBU FRU is > mfi0: 5533 (boot + 64s/0x0020/info) - Board Revision > mfi0: 5534 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) > mfi0: 5535 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) Info: > enclPd=ffff, scsiType=0, portMap=00, > sasAddr=5000c500138d46b5,0000000000000000 > mfi0: 5536 (boot + 89s/0x0002/info) - PD 08(e0xff/s8) FRU is 42D0422 > mfi0: 5537 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) > mfi0: 5538 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) Info: > enclPd=ffff, scsiType=0, portMap=01, > sasAddr=5000c500138d842d,0000000000000000 > mfi0: 5539 (boot + 89s/0x0002/info) - PD 09(e0xff/s9) FRU is 42D0422 > mfi0: 5540 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) > mfi0: 5541 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) Info: > enclPd=ffff, scsiType=0, portMap=04, > sasAddr=5000c500138d7d75,0000000000000000 > mfi0: 5542 (boot + 89s/0x0002/info) - PD 0a(e0xff/s10) FRU is 42D0422 > mfi0: 5543 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) > mfi0: 5544 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) Info: > enclPd=ffff, scsiType=0, portMap=05, > sasAddr=5000c500138d7835,0000000000000000 > mfi0: 5545 (boot + 89s/0x0002/info) - PD 0b(e0xff/s11) FRU is 42D0422 > mfi0: 5546 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) > mfi0: 5547 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) Info: > enclPd=ffff, scsiType=0, portMap=02, > sasAddr=5000c500138d60b5,0000000000000000 > mfi0: 5548 (boot + 89s/0x0002/info) - PD 0c(e0xff/s12) FRU is 42D0422 > mfi0: 5549 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) > mfi0: 5550 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) Info: > enclPd=ffff, scsiType=0, portMap=03, > sasAddr=5000c500138d7bdd,0000000000000000 > mfi0: 5551 (boot + 89s/0x0002/info) - PD 0d(e0xff/s13) FRU is 42D0422 > mfi0: 5552 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) > mfi0: 5553 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) Info: > enclPd=ffff, scsiType=0, portMap=06, > sasAddr=5000c500138d6839,0000000000000000 > mfi0: 5554 (boot + 89s/0x0002/info) - PD 0e(e0xff/s14) FRU is 42D0422 > mfi0: 5555 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) > mfi0: 5556 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) Info: > enclPd=ffff, scsiType=0, portMap=07, > sasAddr=5000c500138d5e8d,0000000000000000 > mfi0: 5557 (boot + 89s/0x0002/info) - PD 0f(e0xff/s15) FRU is 42D0422 > mfi0: 5558 (boot + 144s/0x0008/info) - Battery temperature is normal > mfi0: 5559 (308392379s/0x0020/info) - Time established as 10/09/09 > 8:32:59; (258 seconds since power on) > mfi0: 5560 (boot + 3s/0x0020/info) - Firmware initialization started > (PCI ID 0060/1000/0364/1014) > mfi0: 5561 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 > mfi0: 5562 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 006 > 0/1000/0364/1014) > mfi0: 5563 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 > mfi0: 5564 (boot + 64s/0x0008/info) - Battery Present > mfi0: 5565 (boot + 64s/0x0020/info) - BBU FRU is > mfi0: 5566 (boot + 64s/0x0020/info) - Board Revision > mfi0: 5567 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) > mfi0: 5568 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) Info: > enclPd=ffff, scsiType=0, portMap=00, > sasAddr=5000c500138d46b5,0000000000000000 > mfi0: 5569 (boot + 89s/0x0002/info) - PD 08(e0xff/s8) FRU is 42D0422 > mfi0: 5570 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) > mfi0: 5571 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) Info: > enclPd=ffff, scsiType=0, portMap=01, > sasAddr=5000c500138d842d,0000000000000000 > mfi0: 5572 (boot + 89s/0x0002/info) - PD 09(e0xff/s9) FRU is 42D0422 > mfi0: 5573 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) > mfi0: 5574 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) Info: > enclPd=ffff, scsiType=0, portMap=04, > sasAddr=5000c500138d7d75,0000000000000000 > mfi0: 5575 (boot + 89s/0x0002/info) - PD 0a(e0xff/s10) FRU is 42D0422 > mfi0: 5576 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) > mfi0: 5577 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) Info: > enclPd=ffff, scsiType=0, portMap=05, > sasAddr=5000c500138d7835,0000000000000000 > mfi0: 5578 (boot + 89s/0x0002/info) - PD 0b(e0xff/s11) FRU is 42D0422 > mfi0: 5579 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) > mfi0: 5580 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) Info: > enclPd=ffff, scsiType=0, portMap=02, > sasAddr=5000c500138d60b5,0000000000000000 > mfi0: 5581 (boot + 89s/0x0002/info) - PD 0c(e0xff/s12) FRU is 42D0422 > mfi0: 5582 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) > mfi0: 5583 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) Info: > enclPd=ffff, scsiType=0, portMap=03, > sasAddr=5000c500138d7bdd,0000000000000000 > mfi0: 5584 (boot + 89s/0x0002/info) - PD 0d(e0xff/s13) FRU is 42D0422 > mfi0: 5585 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) > mfi0: 5586 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) Info: > enclPd=ffff, scsiType=0, portMap=06, > sasAddr=5000c500138d6839,0000000000000000 > mfi0: 5587 (boot + 89s/0x0002/info) - PD 0e(e0xff/s14) FRU is 42D0422 > mfi0: 5588 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) > mfi0: 5589 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) Info: > enclPd=ffff, scsiType=0, portMap=07, > sasAddr=5000c500138d5e8d,0000000000000000 > mfi0: 5590 (boot + 89s/0x0002/info) - PD 0f(e0xff/s15) FRU is 42D0422 > mfi0: 5591 (boot + 144s/0x0008/info) - Battery temperature is normal > mfi0: 5592 (308392995s/0x0020/info) - Time established as 10/09/09 > 8:43:15; (259 seconds since power on) > mfi0: 5593 (boot + 3s/0x0020/info) - Firmware initialization started > (PCI ID 0060/1000/0364/1014) > mfi0: 5594 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 > mfi0: 5595 (boot + 3s/0x0020/info) - Firmware initialization started > (PCI ID 0060/1000/0364/1014) > mfi0: 5596 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 > mfi0: 5597 (boot + 64s/0x0008/info) - Battery Present > mfi0: 5598 (boot + 64s/0x0020/info) - BBU FRU is > mfi0: 5599 (boot + 64s/0x0020/info) - Board Revision > mfi0: 5600 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) > mfi0: 5601 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) Info: > enclPd=ffff, scsiType=0, portMap=00, > sasAddr=5000c500138d46b5,0000000000000000 > mfi0: 5602 (boot + 89s/0x0002/info) - PD 08(e0xff/s8) FRU is 42D0422 > mfi0: 5603 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) > mfi0: 5604 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) Info: > enclPd=ffff, scsiType=0, portMap=01, > sasAddr=5000c500138d842d,0000000000000000 > mfi0: 5605 (boot + 89s/0x0002/info) - PD 09(e0xff/s9) FRU is 42D0422 > mfi0: 5606 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) > mfi0: 5607 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) Info: > enclPd=ffff, scsiType=0, portMap=04, > sasAddr=5000c500138d7d75,0000000000000000 > mfi0: 5608 (boot + 89s/0x0002/info) - PD 0a(e0xff/s10) FRU is 42D0422 > mfi0: 5609 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) > mfi0: 5610 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) Info: > enclPd=ffff, scsiType=0, portMap=05, > sasAddr=5000c500138d7835,0000000000000000 > mfi0: 5611 (boot + 89s/0x0002/info) - PD 0b(e0xff/s11) FRU is 42D0422 > mfi0: 5612 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) > mfi0: 5613 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) Info: > enclPd=ffff, scsiType=0, portMap=02, > sasAddr=5000c500138d60b5,0000000000000000 > mfi0: 5614 (boot + 89s/0x0002/info) - PD 0c(e0xff/s12) FRU is 42D0422 > mfi0: 5615 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) > mfi0: 5616 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) Info: > enclPd=ffff, scsiType=0, portMap=03, > sasAddr=5000c500138d7bdd,0000000000000000 > mfi0: 5617 (boot + 89s/0x0002/info) - PD 0d(e0xff/s13) FRU is 42D0422 > mfi0: 5618 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) > mfi0: 5619 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) Info: > enclPd=ffff, scsiType=0, portMap=06, > sasAddr=5000c500138d6839,0000000000000000 > mfi0: 5620 (boot + 89s/0x0002/info) - PD 0e(e0xff/s14) FRU is 42D0422 > mfi0: 5621 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) > mfi0: 5622 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) Info: > enclPd=ffff, scsiType=0, portMap=07, > sasAddr=5000c500138d5e8d,0000000000000000 > mfi0: 5623 (boot + 89s/0x0002/info) - PD 0f(e0xff/s15) FRU is 42D0422 > mfi0: 5624 (boot + 144s/0x0008/info) - Battery temperature is normal > mfi0: 5625 (308393612s/0x0020/info) - Time established as 10/09/09 > 8:53:32; (261 seconds since power on) > mfi0: 5626 (boot + 3s/0x0020/info) - Firmware initialization started > (PCI ID 0060/1000/0364/1014) > mfi0: 5627 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 > mfi0: 5628 (boot + 3s/0x0020/info) - Firmware initialization started > (PCI ID 0060/1000/0364/1014) > mfi0: 5629 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 > mfi0: 5630 (boot + 64s/0x0008/info) - Battery Present > mfi0: 5631 (boot + 64s/0x0020/info) - BBU FRU is > mfi0: 5632 (boot + 64s/0x0020/info) - Board Revision > mfi0: 5633 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) > mfi0: 5634 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) Info: > enclPd=ffff, scsiType=0, portMap=00, > sasAddr=5000c500138d46b5,0000000000000000 > mfi0: 5635 (boot + 89s/0x0002/info) - PD 08(e0xff/s8) FRU is 42D0422 > mfi0: 5636 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) > mfi0: 5637 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) Info: > enclPd=ffff, scsiType=0, portMap=01, > sasAddr=5000c500138d842d,0000000000000000 > mfi0: 5638 (boot + 89s/0x0002/info) - PD 09(e0xff/s9) FRU is 42D0422 > mfi0: 5639 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) > mfi0: 5640 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) Info: > enclPd=ffff, scsiType=0, portMap=04, > sasAddr=5000c500138d7d75,0000000000000000 > mfi0: 5641 (boot + 89s/0x0002/info) - PD 0a(e0xff/s10) FRU is 42D0422 > mfi0: 5642 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) > mfi0: 5643 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) Info: > enclPd=ffff, scsiType=0, portMap=05, > sasAddr=5000c500138d7835,0000000000000000 > mfi0: 5644 (boot + 89s/0x0002/info) - PD 0b(e0xff/s11) FRU is 42D0422 > mfi0: 5645 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) > mfi0: 5646 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) Info: > enclPd=ffff, scsiType=0, portMap=02, > sasAddr=5000c500138d60b5,0000000000000000 > mfi0: 5647 (boot + 89s/0x0002/info) - PD 0c(e0xff/s12) FRU is 42D0422 > mfi0: 5648 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) > mfi0: 5649 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) Info: > enclPd=ffff, scsiType=0, portMap=03, > sasAddr=5000c500138d7bdd,0000000000000000 > mfi0: 5650 (boot + 89s/0x0002/info) - PD 0d(e0xff/s13) FRU is 42D0422 > mfi0: 5651 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) > mfi0: 5652 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) Info: > enclPd=ffff, scsiType=0, portMap=06, > sasAddr=5000c500138d6839,0000000000000000 > mfi0: 5653 (boot + 89s/0x0002/info) - PD 0e(e0xff/s14) FRU is 42D0422 > mfi0: 5654 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) > mfi0: 5655 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) Info: > enclPd=ffff, scsiType=0, portMap=07, > sasAddr=5000c500138d5e8d,0000000000000000 > mfi0: 5656 (boot + 89s/0x0002/info) - PD 0f(e0xff/s15) FRU is 42D0422 > mfi0: 5657 (boot + 144s/0x0008/info) - Battery temperature is normal > mfi0: 5658 (308394231s/0x0020/info) - Time established as 10/09/09 > 9:03:51; (262 seconds since power on) > mfi0: 5659 (boot + 3s/0x0020/info) - Firmware initialization started > (PCI ID 0060/1000/0364/1014) > mfi0: 5660 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 > mfi0: 5661 (boot + 3s/0x0020/info) - Firmware initialization started > (PCI ID 0060/1000/0364/1014) > mfi0: 5662 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691 > mfi0: 5663 (boot + 64s/0x0008/info) - Battery Present > mfi0: 5664 (boot + 64s/0x0020/info) - BBU FRU is > mfi0: 5665 (boot + 64s/0x0020/info) - Board Revision > mfi0: 5666 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) > mfi0: 5667 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) Info: > enclPd=ffff, scsiType=0, portMap=00, > sasAddr=5000c500138d46b5,0000000000000000 > > So on. > -- wbr, pluknet From owner-freebsd-scsi@FreeBSD.ORG Thu Oct 15 12:53:08 2009 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 503A61065784; Thu, 15 Oct 2009 12:53:08 +0000 (UTC) (envelope-from pluknet@gmail.com) Received: from mail-fx0-f222.google.com (mail-fx0-f222.google.com [209.85.220.222]) by mx1.freebsd.org (Postfix) with ESMTP id 6B64B8FC0C; Thu, 15 Oct 2009 12:53:06 +0000 (UTC) Received: by fxm22 with SMTP id 22so1044229fxm.36 for ; Thu, 15 Oct 2009 05:53:05 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:received:in-reply-to:references :date:message-id:subject:from:to:content-type; bh=YsvGJWg7CPQERBef2IBEaYx+2ScJ3dl3rcPkAcLCK+E=; b=msrB7Hcyn0x7C1DgqkSusR4lnvHBqc1kdqZFqPp3Lm/Xf8hoTsBkzKbsRO6OwDgGn9 nfjHDUnXop2uyapRdc8EI8DbQEwy/+EV3ZOdbwE3IvJG4VQCFkGgWkxBHoAUoDvE/FS+ fkw4l+M8Esp9dfCor5ZMrlKYGCiMsVlSYXMf0= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :content-type; b=a721UL4s6uAmaVqbOuxJLAMKzMeBmkbTZLMulsWZWxMWnbSA22NGyvQRrPhuu5wOnZ esN6KSvsFVmmB13bHFDbH8pXIMPY9z/kWv6NSq036O4rKfdviPPHa7Zr4nJGsaG98mBL lrMVIyuBQH5VgEJrnRoNd0QfOIlQx61ov6gO4= MIME-Version: 1.0 Received: by 10.204.32.213 with SMTP id e21mr23813bkd.34.1255611184791; Thu, 15 Oct 2009 05:53:04 -0700 (PDT) In-Reply-To: References: Date: Thu, 15 Oct 2009 16:53:04 +0400 Message-ID: From: pluknet To: freebsd-stable , freebsd-scsi Content-Type: text/plain; charset=ISO-8859-1 Cc: Subject: Re: mfi(4) endless loop kernel output on attach X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 15 Oct 2009 12:53:08 -0000 >> >> This is 7.2-R. Seen on IBM x3650M2. >> >> During the boot I get those endless looping kernel messages while on >> mfi(4) attach phase. >> It's getting more odd since 7.2 booted and worked fine on exactly this >> server model >> months ago (on different box though).. Any hints? >> > > After the looked endless loop the kernel eventually finished > the mfi(4) initialization and continued its booting. > Is it expected to do so long initialization? > Replying to myself. As someone pointed out in the private email, that's due to the large log contained on non-volatile memory in the controller. MegaCli -AdpEventLog -GetEventLogInfo -aAll cleaned up 'em all. Sorry for noise. -- wbr, pluknet From owner-freebsd-scsi@FreeBSD.ORG Thu Oct 15 13:32:48 2009 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 82380106566B; Thu, 15 Oct 2009 13:32:48 +0000 (UTC) (envelope-from jhb@freebsd.org) Received: from cyrus.watson.org (cyrus.watson.org [65.122.17.42]) by mx1.freebsd.org (Postfix) with ESMTP id 53CBD8FC08; Thu, 15 Oct 2009 13:32:48 +0000 (UTC) Received: from bigwig.baldwin.cx (66.111.2.69.static.nyinternet.net [66.111.2.69]) by cyrus.watson.org (Postfix) with ESMTPSA id 0363746B03; Thu, 15 Oct 2009 09:32:48 -0400 (EDT) Received: from jhbbsd.hudson-trading.com (unknown [209.249.190.8]) by bigwig.baldwin.cx (Postfix) with ESMTPA id 0B53D8A01B; Thu, 15 Oct 2009 09:32:47 -0400 (EDT) From: John Baldwin To: freebsd-stable@freebsd.org Date: Thu, 15 Oct 2009 08:53:49 -0400 User-Agent: KMail/1.9.7 References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200910150853.49850.jhb@freebsd.org> X-Greylist: Sender succeeded SMTP AUTH, not delayed by milter-greylist-4.0.1 (bigwig.baldwin.cx); Thu, 15 Oct 2009 09:32:47 -0400 (EDT) X-Virus-Scanned: clamav-milter 0.95.1 at bigwig.baldwin.cx X-Virus-Status: Clean X-Spam-Status: No, score=-2.5 required=4.2 tests=AWL,BAYES_00,RDNS_NONE autolearn=no version=3.2.5 X-Spam-Checker-Version: SpamAssassin 3.2.5 (2008-06-10) on bigwig.baldwin.cx Cc: freebsd-scsi , pluknet Subject: Re: mfi(4) endless loop kernel output on attach X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 15 Oct 2009 13:32:48 -0000 On Thursday 15 October 2009 5:51:19 am pluknet wrote: > Hi. > > This is 7.2-R. Seen on IBM x3650M2. > > During the boot I get those endless looping kernel messages while on > mfi(4) attach phase. > It's getting more odd since 7.2 booted and worked fine on exactly this > server model > months ago (on different box though).. Any hints? We just had some boxes die like this (but spewing a different loop of messages on boot related to continuously scheduling patrol reads and consistency checks that finished immediately) at work. We fixed them by swapping out the controller. We might try stick them in a different box and reflashing them using mfiutil(8) to see if it's some sort of corrupted state that flashing the adapter fixes. In your case it looks lik the firmware keeps crashing and restarting. -- John Baldwin From owner-freebsd-scsi@FreeBSD.ORG Thu Oct 15 15:16:24 2009 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id EE75F106566B; Thu, 15 Oct 2009 15:16:24 +0000 (UTC) (envelope-from pluknet@gmail.com) Received: from mail-fx0-f222.google.com (mail-fx0-f222.google.com [209.85.220.222]) by mx1.freebsd.org (Postfix) with ESMTP id 345008FC1B; Thu, 15 Oct 2009 15:16:24 +0000 (UTC) Received: by fxm22 with SMTP id 22so1208245fxm.36 for ; Thu, 15 Oct 2009 08:16:23 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:received:in-reply-to:references :date:message-id:subject:from:to:cc:content-type :content-transfer-encoding; bh=GwUcY5ctpHtArn/geu8Oke7gozfxshWiPdCzzelgNc8=; b=QGU0f1CO0RucHjsyrU+tawuvqb67q16ZvOaJRLxR2aGFe3SUjgWpckqAn/cf2ZpRqU 9a3PZUNQLFd7kH4qznmXWVx0W3dqRtnzDxviuM37fFh6+fBCLsiMtqXRUgG/bsorCVJB 6mNfvjmUEnla+1tzGor4pGXkKD/22nM/DG8bs= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type:content-transfer-encoding; b=dG4oWH4kjL4nbYn4OzjlBpqh+CuXBe/K35v9MKm5UittSvmbkg0SOUaR5+xvjfDWv0 RiMyQxkT1D3q+Ma1fWB71dlTcs3dbnJbLWGv2CzEhJEI1cVCztpl+7S2/cWsWwGd36ty MFI1OGeu7P+7wapUlrjM7/znzxrRv+9N2EYLA= MIME-Version: 1.0 Received: by 10.204.49.73 with SMTP id u9mr121445bkf.129.1255619783275; Thu, 15 Oct 2009 08:16:23 -0700 (PDT) In-Reply-To: <200910150853.49850.jhb@freebsd.org> References: <200910150853.49850.jhb@freebsd.org> Date: Thu, 15 Oct 2009 19:16:23 +0400 Message-ID: From: pluknet To: John Baldwin Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Cc: freebsd-scsi , freebsd-stable@freebsd.org Subject: Re: mfi(4) endless loop kernel output on attach X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 15 Oct 2009 15:16:25 -0000 2009/10/15 John Baldwin : > On Thursday 15 October 2009 5:51:19 am pluknet wrote: >> Hi. >> >> This is 7.2-R. Seen on IBM x3650M2. >> >> During the boot I get those endless looping kernel messages while on >> mfi(4) attach phase. >> It's getting more odd since 7.2 booted and worked fine on exactly this >> server model >> months ago (on different box though).. Any hints? > > We just had some boxes die like this (but spewing a different loop of mes= sages > on boot related to continuously scheduling patrol reads and consistency > checks that finished immediately) at work. =A0We fixed them by swapping o= ut the > controller. =A0We might try stick them in a different box and reflashing = them > using mfiutil(8) to see if it's some sort of corrupted state that flashin= g > the adapter fixes. > > In your case it looks lik the firmware keeps crashing and restarting. Probably it is. Though clearing logs helped me. --=20 wbr, pluknet From owner-freebsd-scsi@FreeBSD.ORG Thu Oct 15 19:18:27 2009 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 52983106568B; Thu, 15 Oct 2009 19:18:27 +0000 (UTC) (envelope-from jhb@freebsd.org) Received: from cyrus.watson.org (cyrus.watson.org [65.122.17.42]) by mx1.freebsd.org (Postfix) with ESMTP id 239C88FC20; Thu, 15 Oct 2009 19:18:27 +0000 (UTC) Received: from bigwig.baldwin.cx (66.111.2.69.static.nyinternet.net [66.111.2.69]) by cyrus.watson.org (Postfix) with ESMTPSA id B0BCB46B09; Thu, 15 Oct 2009 15:18:26 -0400 (EDT) Received: from jhbbsd.hudson-trading.com (unknown [209.249.190.8]) by bigwig.baldwin.cx (Postfix) with ESMTPA id DBBA38A01B; Thu, 15 Oct 2009 15:18:25 -0400 (EDT) From: John Baldwin To: pluknet Date: Thu, 15 Oct 2009 11:35:04 -0400 User-Agent: KMail/1.9.7 References: <200910150853.49850.jhb@freebsd.org> In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Message-Id: <200910151135.04382.jhb@freebsd.org> X-Greylist: Sender succeeded SMTP AUTH, not delayed by milter-greylist-4.0.1 (bigwig.baldwin.cx); Thu, 15 Oct 2009 15:18:25 -0400 (EDT) X-Virus-Scanned: clamav-milter 0.95.1 at bigwig.baldwin.cx X-Virus-Status: Clean X-Spam-Status: No, score=-2.5 required=4.2 tests=AWL,BAYES_00, DATE_IN_PAST_03_06,RDNS_NONE autolearn=no version=3.2.5 X-Spam-Checker-Version: SpamAssassin 3.2.5 (2008-06-10) on bigwig.baldwin.cx Cc: freebsd-scsi , freebsd-stable@freebsd.org Subject: Re: mfi(4) endless loop kernel output on attach X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 15 Oct 2009 19:18:27 -0000 On Thursday 15 October 2009 11:16:23 am pluknet wrote: > 2009/10/15 John Baldwin : > > On Thursday 15 October 2009 5:51:19 am pluknet wrote: > >> Hi. > >> > >> This is 7.2-R. Seen on IBM x3650M2. > >> > >> During the boot I get those endless looping kernel messages while on > >> mfi(4) attach phase. > >> It's getting more odd since 7.2 booted and worked fine on exactly this > >> server model > >> months ago (on different box though).. Any hints? > > > > We just had some boxes die like this (but spewing a different loop of m= essages > > on boot related to continuously scheduling patrol reads and consistency > > checks that finished immediately) at work. =A0We fixed them by swapping= out the > > controller. =A0We might try stick them in a different box and reflashin= g them > > using mfiutil(8) to see if it's some sort of corrupted state that flash= ing > > the adapter fixes. > > > > In your case it looks lik the firmware keeps crashing and restarting. >=20 > Probably it is. Though clearing logs helped me. Well, from your other e-mail it seems it was just dumping lots of old logs since the previous clean shutdown. (I almost mentioned that case in my original e-mail). In that case you can simply let it finish walking through all the logs or you can set loader tunables to raise the minimum class of message so it skips all the lower priority info messages when walking the log. =2D-=20 John Baldwin