confused with network cards

From owner-freebsd-net Mon Dec 28 11:23:37 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id LAA06335 for freebsd-net-outgoing; Mon, 28 Dec 1998 11:23:37 -0800 (PST) (envelope-from owner-freebsd-net@FreeBSD.ORG) Received: from mail.bvinet.com ([208.239.76.2]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id LAA06329 for ; Mon, 28 Dec 1998 11:23:34 -0800 (PST) (envelope-from msierra@bvinet.com) Received: by mail with Internet Mail Service (5.5.1960.3) id ; Mon, 28 Dec 1998 14:22:50 -0500 Message-ID: <211D0157FD1FD21190DB00104B8765E906D10D@mail> From: Miguel Sierra To: "'net@freeBSD.ORG'" Subject: trying to get computer on network Date: Mon, 28 Dec 1998 14:22:44 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.1960.3) Content-Type: multipart/alternative; boundary="---- =_NextPart_001_01BE3297.755531D0" Sender: owner-freebsd-net@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------ =_NextPart_001_01BE3297.755531D0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable =A0 =A0 Why when you use /stand/sysinstall and you try to set up your network interfaces you only have 5 options: =A0 =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0lp0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= Parallel Port IP (PLIP) peer connection =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0sl0 = =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0SLIP interface on device /dev/cuaa0 = (COM1) =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0ppp0 =A0=A0=A0=A0=A0=A0=A0=A0=A0PPP = interface on device /dev/cuaa0 (COM1) =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0sl0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= SLIP interface on device /dev/cuaa1 (COM2) =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0ppp0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 PPP = interface on device /dev/cuaa1 (COM2)=20 I need to set up my network card, and I have already set it up in lp0. = I need to remove it from lp0 and do something else to it????? =A0 Miguel. ------ =_NextPart_001_01BE3297.755531D0 Content-Type: text/html; charset="iso-8859-1"

Why when you use /stand/sysinstall and you try to set up your network interfaces you only have 5 options:

lp0 Parallel Port IP (PLIP) peer connection

sl0 SLIP interface on device /dev/cuaa0 (COM1)

ppp0 PPP interface on device /dev/cuaa0 (COM1)

sl0 SLIP interface on device /dev/cuaa1 (COM2)

ppp0 PPP interface on device /dev/cuaa1 (COM2)

I need to set up my network card, and I have already set it up in lp0. I need to remove it from lp0 and do something else to it?????

Miguel.

------ =_NextPart_001_01BE3297.755531D0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-net" in the body of the message From owner-freebsd-net Mon Dec 28 11:54:28 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id LAA10269 for freebsd-net-outgoing; Mon, 28 Dec 1998 11:54:28 -0800 (PST) (envelope-from owner-freebsd-net@FreeBSD.ORG) Received: from mail.bvinet.com ([208.239.76.2]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id LAA10263 for ; Mon, 28 Dec 1998 11:54:23 -0800 (PST) (envelope-from msierra@bvinet.com) Received: by mail with Internet Mail Service (5.5.1960.3) id ; Mon, 28 Dec 1998 14:53:45 -0500 Message-ID: <211D0157FD1FD21190DB00104B8765E906D112@mail> From: Miguel Sierra To: "'freebsd-net@freebsd.org'" Subject: confused with network cards Date: Mon, 28 Dec 1998 14:53:43 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.1960.3) Content-Type: multipart/alternative; boundary="---- =_NextPart_001_01BE329B.C6775450" Sender: owner-freebsd-net@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------ =_NextPart_001_01BE329B.C6775450 Content-Type: text/plain Guys: I have two network cards (a ISA DLink which uses the drivers of a DE220, and I have another one, a SMC PCI with support of 10BaseT and 100BaseT) which of the two cards is better for FreeBSD?? and how to configure them to see my network. I could ping my localhost. I tried to set up my ed0, but it tells me that there is nothing on ed0. that is as far as I have got. thank you, Miguel. ------ =_NextPart_001_01BE329B.C6775450 Content-Type: text/html Content-Transfer-Encoding: quoted-printable confused with network cards

Guys:

I have two network cards (a ISA DLink which uses the = drivers of a DE220, and I have another one, a SMC PCI with support of = 10BaseT and 100BaseT) which of the two cards is better for FreeBSD?? = and how to configure them to see my network.

I could ping my localhost. I tried to set up my ed0, = but it tells me that there is nothing on ed0. that is as far as I have = got.

thank you,

Miguel.

------ =_NextPart_001_01BE329B.C6775450-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-net" in the body of the message From owner-freebsd-net Mon Dec 28 12:40:13 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id MAA15631 for freebsd-net-outgoing; Mon, 28 Dec 1998 12:40:13 -0800 (PST) (envelope-from owner-freebsd-net@FreeBSD.ORG) Received: from Homer.Web-Ex.com ([209.54.66.254]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id MAA15615 for ; Mon, 28 Dec 1998 12:40:11 -0800 (PST) (envelope-from jim@web-ex.com) Received: from localhost (jim@localhost) by Homer.Web-Ex.com (8.9.1/8.8.8) with ESMTP id PAA00320 for ; Mon, 28 Dec 1998 15:39:55 -0500 (EST) (envelope-from jim@web-ex.com) X-Authentication-Warning: Homer.Web-Ex.com: jim owned process doing -bs Date: Mon, 28 Dec 1998 15:39:55 -0500 (EST) From: Jim Cassata To: "'net@freeBSD.ORG'" Subject: Re: trying to get computer on network In-Reply-To: <211D0157FD1FD21190DB00104B8765E906D10D@mail> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=X-UNKNOWN Content-Transfer-Encoding: 8bit X-MIME-Autoconverted: from QUOTED-PRINTABLE to 8bit by hub.freebsd.org id MAA15623 Sender: owner-freebsd-net@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Is your card being found on bootup? look in dmesg for a line like: ed0 found at ... that is the interface you want to configure, and sysinstall will do it if you like. lo0 is your loopback address. Jim Cassata 516.421.6000 jim@web-ex.com Web Express 20 Broadhollow Road Suite 3011 Melville, NY 11747 On Mon, 28 Dec 1998, Miguel Sierra wrote: > > > Why when you use /stand/sysinstall and you try to set up your network > interfaces you only have 5 options: > > > > lp0 Parallel Port IP (PLIP) peer connection > sl0 SLIP interface on device /dev/cuaa0 (COM1) > ppp0 PPP interface on device /dev/cuaa0 (COM1) > sl0 SLIP interface on device /dev/cuaa1 (COM2) > ppp0 PPP interface on device /dev/cuaa1 (COM2) > > I need to set up my network card, and I have already set it up in lp0. I > need to remove it from lp0 and do something else to it????? > > > > Miguel. > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-net" in the body of the message From owner-freebsd-net Mon Dec 28 12:43:31 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id MAA16385 for freebsd-net-outgoing; Mon, 28 Dec 1998 12:43:31 -0800 (PST) (envelope-from owner-freebsd-net@FreeBSD.ORG) Received: from Homer.Web-Ex.com ([209.54.66.254]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id MAA16378 for ; Mon, 28 Dec 1998 12:43:29 -0800 (PST) (envelope-from jim@web-ex.com) Received: from localhost (jim@localhost) by Homer.Web-Ex.com (8.9.1/8.8.8) with ESMTP id PAA00327 for ; Mon, 28 Dec 1998 15:43:15 -0500 (EST) (envelope-from jim@web-ex.com) X-Authentication-Warning: Homer.Web-Ex.com: jim owned process doing -bs Date: Mon, 28 Dec 1998 15:43:15 -0500 (EST) From: Jim Cassata To: FreeBSD Net Subject: Re: confused with network cards In-Reply-To: <211D0157FD1FD21190DB00104B8765E906D112@mail> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-net@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org an ed0 card (ne2000 compatible) must be set to a specific io address and irq and that info told to the kernel. I use irq 5, io 340h. Put this in your kernel config and make a new kernel. If you are going to ask how to do either one of those I would refer you to the docomentation. If this is a new install, just know what irq and io address the nic card is set to and tell sysinstall during the install. Jim Cassata 516.421.6000 jim@web-ex.com Web Express 20 Broadhollow Road Suite 3011 Melville, NY 11747 On Mon, 28 Dec 1998, Miguel Sierra wrote: > > > Guys: > > I have two network cards (a ISA DLink which uses the drivers of a DE220, > and I have another one, a SMC PCI with support of 10BaseT and 100BaseT) > which of the two cards is better for FreeBSD?? and how to configure them > to see my network. > > I could ping my localhost. I tried to set up my ed0, but it tells me > that there is nothing on ed0. that is as far as I have got. > > thank you, > > Miguel. > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-net" in the body of the message From owner-freebsd-net Mon Dec 28 13:32:25 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id NAA24182 for freebsd-net-outgoing; Mon, 28 Dec 1998 13:32:25 -0800 (PST) (envelope-from owner-freebsd-net@FreeBSD.ORG) Received: from keks.econ.psu.ru (keks.econ.psu.ru [212.192.65.2]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id NAA24177 for ; Mon, 28 Dec 1998 13:32:20 -0800 (PST) (envelope-from vikv@keks.econ.psu.ru) Received: from 192.168.236.1 (KEKN.ECON.EDU [192.168.236.99]) by keks.econ.psu.ru (8.9.1/8.8.8) with SMTP id HAA05179 for ; Tue, 29 Dec 1998 07:33:24 +0500 (ES) (envelope-from vikv@keks.econ.psu.ru) Date: Tue, 29 Dec 1998 02:28:11 +0500 From: vikv X-Mailer: The Bat! (v1.036) S/N A89C4A5D Reply-To: vikv Message-ID: <11102.981229@keks.econ.psu.ru> To: "'freebsd-net@freebsd.org'" Subject: Re: confused with network cards References: <211D0157FD1FD21190DB00104B8765E906D112@mail> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-net@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hello Miguel, MS> Guys: MS> I have two network cards (a ISA DLink which uses the drivers of a DE220, MS> and I have another one, a SMC PCI with support of 10BaseT and 100BaseT) MS> which of the two cards is better for FreeBSD?? and how to configure them MS> to see my network. MS> I could ping my localhost. I tried to set up my ed0, but it tells me MS> that there is nothing on ed0. that is as far as I have got. ifcofig -a show all interfaces 1. in config file for you kernel find string "device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 vector edintr" and edit port&irq. make new kernel& install it 2. use visul config then boot you box (use -c option) /stand/sysinstall configure you ip/mask/gate/...... MS> thank you, MS> Miguel. Best regards, Vikv mailto:vikv@keks.econ.psu.ru To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-net" in the body of the message From owner-freebsd-net Mon Dec 28 15:38:34 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id PAA12495 for freebsd-net-outgoing; Mon, 28 Dec 1998 15:38:34 -0800 (PST) (envelope-from owner-freebsd-net@FreeBSD.ORG) Received: from milkyway.org (lta-r-1.usit.net [205.241.194.17] (may be forged)) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id PAA12490 for ; Mon, 28 Dec 1998 15:38:30 -0800 (PST) (envelope-from toby@milkyway.org) Received: from milkyway.org (rigel.milkyway.org [205.241.194.19]) by milkyway.org (8.8.5/8.8.3) with ESMTP id SAA10228; Mon, 28 Dec 1998 18:36:29 -0500 (EST) Message-ID: <368816E2.15E9306A@milkyway.org> Date: Mon, 28 Dec 1998 18:40:19 -0500 From: Toby Swanson X-Mailer: Mozilla 4.04 [en] (Win95; I) MIME-Version: 1.0 To: Miguel Sierra CC: "'net@freeBSD.ORG'" Subject: Re: trying to get computer on network References: <211D0157FD1FD21190DB00104B8765E906D10D@mail> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-net@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Greetings Miguel, I have used D-Link network interface cards (NIC) with complete success. If you want to re-install FreeBSD try the following. Boot your computer with a DOS disk and use the D-Link setup program on the disk that came with the NIC to configure it. My NIC is set to interrupt 10 and an I/O address of 300 hex. You will need to select an unused interrupt and I/O address. I think the D-Link setup program will tell you if the settings you selected are conflicting with other hardware, but I may be wrong. Once you have configured the NIC and saved the settings boot the machine with the FreeBSD boot disk and choose the visual setup when prompted. Configure the ed0 adapter with the same settings you used to configure the NIC. If you do not want to reinstall FreeBSD you will have to edit the kernel configuration file and set the ed0 adapter parameters to match the NIC settings. The FreeBSD handbook explains how to do this, section 5 in the version I have. Toby To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-net" in the body of the message From owner-freebsd-net Mon Dec 28 15:50:57 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id PAA14082 for freebsd-net-outgoing; Mon, 28 Dec 1998 15:50:57 -0800 (PST) (envelope-from owner-freebsd-net@FreeBSD.ORG) Received: from seg.fault.net (seg.fault.net [207.96.19.192]) by hub.freebsd.org (8.8.8/8.8.8) with SMTP id PAA14075 for ; Mon, 28 Dec 1998 15:50:53 -0800 (PST) (envelope-from awood@fault.net) Received: (qmail 334 invoked by uid 1001); 28 Dec 1998 23:35:23 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 28 Dec 1998 23:35:23 -0000 Date: Mon, 28 Dec 1998 18:35:23 -0500 (EST) From: austin wood To: freebsd-net@FreeBSD.ORG Subject: NATD Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-net@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I have been expierencing a problem with natd in which connections get cut off right after establishment. I have my freebsd machine dialed up to my ISP using pppd, and it acts as a gateway for the rest of my computers. This setup usually works except on certain http sites. With all other protocols I have not expierenced any problems. The problem is that when I use netscape on another machine, I get stuck on "Waiting for reply..." At first I thought it was a hardware problem with the 3COM 509b because it was happening in OpenBSD's ipnat as well, or maybe the programs are extremely similiar. However, this theory proved wrong when I tested it with an Inter EtherExpress Pro.This happens on all of the computers except the main freebsd server. Here is a list of sites that have the problem: URLs with no descriptions are stuck on "Waiting for reply..." http://www.mobis.com/ http://www.linuxhelp.org/ (can load everything except graphics) http://www.luke.net/ http://www.download.com/ (can read first 700 bytes) http://www.filez.com/ http://www.intel.com/ (gets stuck on transferring data) http://www.insecure.org/ http://www.futurestep.com/ http://www.ajax.net/ Here are some configuration files to help: /etc/rc.conf: firewall_enable="YES" firewall_type="NATD" firewall_quiet="NO" firewall_natd_interface="ppp0" tcp_extensions="YES" # NOTE: # If tcp extensions are set to NO, some ftp sites are affected. # Examples: # ftp://mirrors.rcn.com/ # ftp://ftp.xfree86.org/ network_interfaces="lo0 fxp0" ifconfig_lo0="inet 127.0.0.1" ifconfig_fxp0="inet 10.0.0.1 255.255.255.0" gateway_enable="YES" /etc/rc.firewall: if [ "x$firewall_quiet" = "xYES" ]; then fwcmd="/sbin/ipfw -q" else fwcmd="/sbin/ipfw" fi if [ "${firewall_type}" = "natd" -o "${firewall_type}" = "NATD" ]; then $fwcmd -f flush $fwcmd add divert natd all from any to any via ${firewall_natd_interface } $fwcmd add pass all from any to any fi /etc/services: natd 8668/divert I run natd with "natd -interface ppp0". Here is an example of a connection to http://www.futurestep.com: # natd -n ppp0 -v Out [TCP] 10.0.0.2:2287 -> 209.143.199.28:80 aliased to 207.96.19.192:2287 -> 209.143.199.28:80 Out [UDP] 10.0.0.2 -> 207.172.3.16 aliased to 207.96.19.192 -> 207.172.3.16 In [TCP] 209.143.199.28:80 -> 207.96.19.192:2287 aliased to 209.143.199.28:80 -> 10.0.0.2:2287 In [UDP] 207.172.3.16 -> 207.96.19.192 aliased to 207.172.3.16 -> 10.0.0.2 Out [TCP] 10.0.0.2:2291 -> 128.11.10.41:80 aliased to 207.96.19.192:2291 -> 128.11.10.41:80 In [TCP] 128.11.10.41:80 -> 207.96.19.192:2291 aliased to 128.11.10.41:80 -> 10.0.0.2:2291 Out [TCP] 10.0.0.2:2291 -> 128.11.10.41:80 aliased to 207.96.19.192:2291 -> 128.11.10.41:80 Out [TCP] 10.0.0.2:2291 -> 128.11.10.41:80 aliased to 207.96.19.192:2291 -> 128.11.10.41:80 In [TCP] 128.11.10.41:80 -> 207.96.19.192:2291 aliased to 128.11.10.41:80 -> 10.0.0.2:2291 Out [TCP] 10.0.0.2:2291 -> 128.11.10.41:80 aliased to 207.96.19.192:2291 -> 128.11.10.41:80 Out [TCP] 10.0.0.2:2289 -> 209.143.199.28:80 aliased to 207.96.19.192:2289 -> 209.143.199.28:80 Out [TCP] 10.0.0.2:2295 -> 128.11.10.41:80 aliased to 207.96.19.192:2295 -> 128.11.10.41:80 In [TCP] 128.11.10.41:80 -> 207.96.19.192:2291 aliased to 128.11.10.41:80 -> 10.0.0.2:2291 Out [TCP] 10.0.0.2:2291 -> 128.11.10.41:80 aliased to 207.96.19.192:2291 -> 128.11.10.41:80 In [TCP] 209.143.199.28:80 -> 207.96.19.192:2289 aliased to 209.143.199.28:80 -> 10.0.0.2:2289 In [TCP] 128.11.10.41:80 -> 207.96.19.192:2291 aliased to 128.11.10.41:80 -> 10.0.0.2:2291 Out [TCP] 10.0.0.2:2291 -> 128.11.10.41:80 aliased to 207.96.19.192:2291 -> 128.11.10.41:80 In [TCP] 128.11.10.41:80 -> 207.96.19.192:2295 aliased to 128.11.10.41:80 -> 10.0.0.2:2295 Out [TCP] 10.0.0.2:2295 -> 128.11.10.41:80 aliased to 207.96.19.192:2295 -> 128.11.10.41:80 Out [TCP] 10.0.0.2:2295 -> 128.11.10.41:80 aliased to 207.96.19.192:2295 -> 128.11.10.41:80 Out [TCP] 10.0.0.2:2291 -> 128.11.10.41:80 aliased to 207.96.19.192:2291 -> 128.11.10.41:80 In [TCP] 128.11.10.41:80 -> 207.96.19.192:2291 aliased to 128.11.10.41:80 -> 10.0.0.2:2291 Out [TCP] 10.0.0.2:2295 -> 128.11.10.41:80 aliased to 207.96.19.192:2295 -> 128.11.10.41:80 In [TCP] 128.11.10.41:80 -> 207.96.19.192:2295 aliased to 128.11.10.41:80 -> 10.0.0.2:2295 Here is an example for http://www.download.com: # natd -n ppp0 -v Out [TCP] 10.0.0.2:2295 -> 128.11.10.41:80 aliased to 207.96.19.192:2295 -> 128.11.10.41:80 Out [TCP] 10.0.0.2:2288 -> 209.143.199.28:80 aliased to 207.96.19.192:2288 -> 209.143.199.28:80 In [TCP] 128.11.10.41:80 -> 207.96.19.192:2295 aliased to 128.11.10.41:80 -> 10.0.0.2:2295 In [TCP] 209.143.199.28:80 -> 207.96.19.192:2288 aliased to 209.143.199.28:80 -> 10.0.0.2:2288 Out [UDP] 10.0.0.2 -> 207.172.3.16 aliased to 207.96.19.192 -> 207.172.3.16 In [UDP] 207.172.3.16 -> 207.96.19.192 aliased to 207.172.3.16 -> 10.0.0.2 Out [TCP] 10.0.0.2:2296 -> 204.162.80.139:80 aliased to 207.96.19.192:2296 -> 204.162.80.139:80 In [TCP] 204.162.80.139:80 -> 207.96.19.192:2296 aliased to 204.162.80.139:80 -> 10.0.0.2:2296 Out [TCP] 10.0.0.2:2296 -> 204.162.80.139:80 aliased to 207.96.19.192:2296 -> 204.162.80.139:80 Out [TCP] 10.0.0.2:2296 -> 204.162.80.139:80 aliased to 207.96.19.192:2296 -> 204.162.80.139:80 In [TCP] 204.162.80.139:80 -> 207.96.19.192:2296 aliased to 204.162.80.139:80 -> 10.0.0.2:2296 Out [TCP] 10.0.0.2:2296 -> 204.162.80.139:80 aliased to 207.96.19.192:2296 -> 204.162.80.139:80 In [TCP] 204.162.80.139:80 -> 207.96.19.192:2296 aliased to 204.162.80.139:80 -> 10.0.0.2:2296 Out [TCP] 10.0.0.2:2296 -> 204.162.80.139:80 aliased to 207.96.19.192:2296 -> 204.162.80.139:80 In [TCP] 204.162.80.139:80 -> 207.96.19.192:2296 aliased to 204.162.80.139:80 -> 10.0.0.2:2296 Out [TCP] 10.0.0.2:2296 -> 204.162.80.139:80 aliased to 207.96.19.192:2296 -> 204.162.80.139:80 Out [TCP] 10.0.0.2:2297 -> 204.162.80.139:80 aliased to 207.96.19.192:2297 -> 204.162.80.139:80 In [TCP] 204.162.80.139:80 -> 207.96.19.192:2297 aliased to 204.162.80.139:80 -> 10.0.0.2:2297 Out [TCP] 10.0.0.2:2297 -> 204.162.80.139:80 aliased to 207.96.19.192:2297 -> 204.162.80.139:80 Out [TCP] 10.0.0.2:2297 -> 204.162.80.139:80 aliased to 207.96.19.192:2297 -> 204.162.80.139:80 Out [TCP] 10.0.0.2:2297 -> 204.162.80.139:80 aliased to 207.96.19.192:2297 -> 204.162.80.139:80 In [TCP] 204.162.80.139:80 -> 207.96.19.192:2297 aliased to 204.162.80.139:80 -> 10.0.0.2:2297 Out [TCP] 10.0.0.2:2297 -> 204.162.80.139:80 aliased to 207.96.19.192:2297 -> 204.162.80.139:80 In [TCP] 204.162.80.139:80 -> 207.96.19.192:2297 aliased to 204.162.80.139:80 -> 10.0.0.2:2297 Out [TCP] 10.0.0.2:2297 -> 204.162.80.139:80 aliased to 207.96.19.192:2297 -> 204.162.80.139:80 In [TCP] 204.162.80.139:80 -> 207.96.19.192:2297 aliased to 204.162.80.139:80 -> 10.0.0.2:2297 Here is an example of a connection to ftp://mirrors.rcn.com with tcp extensions OFF: # natd -n ppp0 -v Out [UDP] 10.0.0.2 -> 207.172.3.16 aliased to 207.96.19.192 -> 207.172.3.16 In [UDP] 207.172.3.16 -> 207.96.19.192 aliased to 207.172.3.16 -> 10.0.0.2 Out [TCP] 10.0.0.2:2298 -> 207.172.2.11:21 aliased to 207.96.19.192:2298 -> 207.172.2.11:21 In [TCP] 207.172.2.11:21 -> 207.96.19.192:2298 aliased to 207.172.2.11:21 -> 10.0.0.2:2298 Out [TCP] 10.0.0.2:2298 -> 207.172.2.11:21 aliased to 207.96.19.192:2298 -> 207.172.2.11:21 In [TCP] 207.172.2.11:21 -> 207.96.19.192:2298 aliased to 207.172.2.11:21 -> 10.0.0.2:2298 Out [TCP] 10.0.0.2:2298 -> 207.172.2.11:21 aliased to 207.96.19.192:2298 -> 207.172.2.11:21 Out [TCP] 10.0.0.2:2298 -> 207.172.2.11:21 aliased to 207.96.19.192:2298 -> 207.172.2.11:21 In [TCP] 207.172.2.11:21 -> 207.96.19.192:2298 aliased to 207.172.2.11:21 -> 10.0.0.2:2298 Out [TCP] 10.0.0.2:2298 -> 207.172.2.11:21 aliased to 207.96.19.192:2298 -> 207.172.2.11:21 Out [TCP] 10.0.0.2:2298 -> 207.172.2.11:21 aliased to 207.96.19.192:2298 -> 207.172.2.11:21 In [TCP] 207.172.2.11:21 -> 207.96.19.192:2298 aliased to 207.172.2.11:21 -> 10.0.0.2:2298 Out [TCP] 10.0.0.2:2298 -> 207.172.2.11:21 aliased to 207.96.19.192:2298 -> 207.172.2.11:21 Thanks in advance, Austin Wood To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-net" in the body of the message From owner-freebsd-net Mon Dec 28 21:08:24 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id VAA17300 for freebsd-net-outgoing; Mon, 28 Dec 1998 21:08:24 -0800 (PST) (envelope-from owner-freebsd-net@FreeBSD.ORG) Received: from obie.softweyr.com ([204.68.178.33]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id VAA17291 for ; Mon, 28 Dec 1998 21:08:22 -0800 (PST) (envelope-from wes@softweyr.com) Received: from softweyr.com (zaphod.softweyr.com [204.68.178.35]) by obie.softweyr.com (8.8.8/8.8.8) with ESMTP id WAA03563; Mon, 28 Dec 1998 22:06:30 -0700 (MST) (envelope-from wes@softweyr.com) Message-ID: <36886355.E8CCCA84@softweyr.com> Date: Mon, 28 Dec 1998 22:06:29 -0700 From: Wes Peters Organization: Softweyr llc X-Mailer: Mozilla 4.5 [en] (X11; U; FreeBSD 3.0-RELEASE i386) X-Accept-Language: en MIME-Version: 1.0 To: Toby Swanson CC: Miguel Sierra , "'net@freeBSD.ORG'" Subject: Re: trying to get computer on network References: <211D0157FD1FD21190DB00104B8765E906D10D@mail> <368816E2.15E9306A@milkyway.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-net@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Toby Swanson wrote: > > If you do not want to reinstall FreeBSD you will have to edit the > kernel configuration file and set the ed0 adapter parameters to > match the NIC settings. The FreeBSD handbook explains how to > do this, section 5 in the version I have. No you don't. If you have the ed0 device in your kernel, you can edit the parameters at boot time. When you see the boot: prompt, type "-c" (without the quotes) and press return. When you get the config prompt, type "visual" and press return. Use the menus to expand the network adapter list, position the cursor on ed0, and press return. You will now be able to edit the I/O address and IRQ for the ed0 driver; follow the prompts on the screen. When you've finished, press q to quit the configuration editor, save your changes, and boot. Your changes will be saved so they are always used, unless you change them again. -- "Where am I, and what am I doing in this handbasket?" Wes Peters Softweyr LLC http://www.softweyr.com/~softweyr wes@softweyr.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-net" in the body of the message From owner-freebsd-net Tue Dec 29 13:38:07 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id NAA15907 for freebsd-net-outgoing; Tue, 29 Dec 1998 13:38:07 -0800 (PST) (envelope-from owner-freebsd-net@FreeBSD.ORG) Received: from mail.bvinet.com ([208.239.76.2]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id NAA15898 for ; Tue, 29 Dec 1998 13:38:04 -0800 (PST) (envelope-from msierra@bvinet.com) Received: by mail with Internet Mail Service (5.5.1960.3) id ; Tue, 29 Dec 1998 16:37:27 -0500 Message-ID: <211D0157FD1FD21190DB00104B8765E906D117@mail> From: Miguel Sierra To: "'freebsd-net@freebsd.org'" Subject: RE: confused with network cards Date: Tue, 29 Dec 1998 16:37:25 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.1960.3) Content-Type: multipart/alternative; boundary="---- =_NextPart_001_01BE3373.6D84B2D0" Sender: owner-freebsd-net@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------ =_NextPart_001_01BE3373.6D84B2D0 Content-Type: text/plain ifcofig -a show all interfaces 1. in config file for you kernel find string "device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 vector edintr" and edit port&irq. make new kernel& install it 2. use visul config then boot you box (use -c option) /stand/sysinstall configure you ip/mask/gate/...... I can't even see ed0 or any other device other than lp0. However...I'm trying to find out how to rebuild the kernel to look at my network cards which aren't ed0 or de0. I need to find the file that you could change that???? Thank you, Miguel. ------ =_NextPart_001_01BE3373.6D84B2D0 Content-Type: text/html Content-Transfer-Encoding: quoted-printable RE: confused with network cards

ifcofig -a show all interfaces
1. in config file for you kernel find string = "device ed0 at isa? port
0x280 net irq 10 iomem 0xd8000 vector edintr" = and edit port&irq. make
new kernel& install it

2. use visul config then boot you box (use -c = option)

/stand/sysinstall configure you = ip/mask/gate/......

I can't even see ed0 or any other device other than = lp0. However...I'm trying to find out how to rebuild the kernel to look = at my network cards which aren't ed0 or de0. I need to find the file = that you could change that????

Thank you,

Miguel.

------ =_NextPart_001_01BE3373.6D84B2D0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-net" in the body of the message From owner-freebsd-net Tue Dec 29 14:12:47 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id OAA19517 for freebsd-net-outgoing; Tue, 29 Dec 1998 14:12:47 -0800 (PST) (envelope-from owner-freebsd-net@FreeBSD.ORG) Received: from xylan.com (postal.xylan.com [208.8.0.248]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id OAA19496; Tue, 29 Dec 1998 14:12:42 -0800 (PST) (envelope-from wes@softweyr.com) Received: from mailhub.xylan.com by xylan.com (8.8.7/SMI-SVR4 (xylan-mgw 2.2 [OUT])) id OAA07939; Tue, 29 Dec 1998 14:12:14 -0800 (PST) Received: from utah.XYLAN.COM by mailhub.xylan.com (SMI-8.6/SMI-SVR4 (mailhub 2.1 [HUB])) id OAA28235; Tue, 29 Dec 1998 14:12:14 -0800 Received: from softweyr.com by utah.XYLAN.COM (SMI-8.6/SMI-SVR4 (xylan utah [SPOOL])) id PAA06494; Tue, 29 Dec 1998 15:12:13 -0700 Message-ID: <368953BD.4665DF6@softweyr.com> Date: Tue, 29 Dec 1998 15:12:13 -0700 From: Wes Peters Reply-To: freebsd-questions@FreeBSD.ORG Organization: Softweyr LLC X-Mailer: Mozilla 4.5 [en] (X11; U; FreeBSD 2.2.7-RELEASE i386) X-Accept-Language: en MIME-Version: 1.0 To: Miguel Sierra CC: "'freebsd-net@freebsd.org'" , freebsd-questions@FreeBSD.ORG Subject: Re: confused with network cards References: <211D0157FD1FD21190DB00104B8765E906D117@mail> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-net@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Miguel Sierra wrote: > > I can't even see ed0 or any other device other than lp0. However...I'm trying to > find out how to rebuild the kernel to look at my network cards which aren't ed0 > or de0. I need to find the file that you could change that???? > > Thank you, > > Miguel. You're asking on the wrong mailing list. The FreeBSD-questions list is exactly the right place for questions of this sort, and you will find fast, competent, patient help there. I've forwarded a copy of your message there, and directed replies there, too. If you're new to FreeBSD, you should probably subscribe to FreeBSD-questions until you are comfortable and experienced with FreeBSD. Then stay subscribed for at least one more year, giving back. ;^) -- Where am I, and what am I doing in this handbasket? Wes Peters +1.801.915.2061 Softweyr LLC wes@softweyr.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-net" in the body of the message