From owner-freebsd-scsi@FreeBSD.ORG Mon Jun 23 11:07:01 2008 Return-Path: Delivered-To: freebsd-scsi@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id A3985106566B for ; Mon, 23 Jun 2008 11:07:01 +0000 (UTC) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 91FCD8FC29 for ; Mon, 23 Jun 2008 11:07:01 +0000 (UTC) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.2/8.14.2) with ESMTP id m5NB71bH065093 for ; Mon, 23 Jun 2008 11:07:01 GMT (envelope-from owner-bugmaster@FreeBSD.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.2/8.14.1/Submit) id m5NB71w3065089 for freebsd-scsi@FreeBSD.org; Mon, 23 Jun 2008 11:07:01 GMT (envelope-from owner-bugmaster@FreeBSD.org) Date: Mon, 23 Jun 2008 11:07:01 GMT Message-Id: <200806231107.m5NB71w3065089@freefall.freebsd.org> X-Authentication-Warning: freefall.freebsd.org: gnats set sender to owner-bugmaster@FreeBSD.org using -f From: FreeBSD bugmaster To: freebsd-scsi@FreeBSD.org Cc: Subject: Current problem reports assigned to freebsd-scsi@FreeBSD.org X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 23 Jun 2008 11:07:01 -0000 Current FreeBSD problem reports Critical problems Serious problems S Tracker Resp. Description -------------------------------------------------------------------------------- o kern/39388 scsi ncr/sym drivers fail with 53c810 and more than 256MB m o kern/40895 scsi wierd kernel / device driver bug o kern/52638 scsi [panic] SCSI U320 on SMP server won't run faster than s kern/57398 scsi [mly] Current fails to install on mly(4) based RAID di o kern/60598 scsi wire down of scsi devices conflicts with config o kern/60641 scsi [sym] Sporadic SCSI bus resets with 53C810 under load s kern/61165 scsi [panic] kernel page fault after calling cam_send_ccb o kern/74627 scsi [ahc] [hang] Adaptec 2940U2W Can't boot 5.3 o kern/90282 scsi [sym] SCSI bus resets cause loss of ch device o kern/92798 scsi [ahc] SCSI problem with timeouts o kern/94838 scsi Kernel panic while mounting SD card with lock switch o o kern/99954 scsi [ahc] reading from DVD failes on 6.x [regression] o kern/110847 scsi [ahd] Tyan U320 onboard problem with more than 3 disks o kern/120247 scsi [mpt] FreeBSD 6.3 and LSI Logic 1030 = only 3.300MB/s o kern/124667 scsi [amd] [panic] FreeBSD-7 kernel page faults at amd-scsi 15 problems total. Non-critical problems S Tracker Resp. Description -------------------------------------------------------------------------------- o kern/35234 scsi World access to /dev/pass? (for scanner) requires acce o kern/38828 scsi [dpt] [request] DPT PM2012B/90 doesn't work o kern/44587 scsi dev/dpt/dpt.h is missing defines required for DPT_HAND o kern/76178 scsi [ahd] Problem with ahd and large SCSI Raid system o kern/114597 scsi [sym] System hangs at SCSI bus reset with dual HBAs o kern/119668 scsi [cam] [patch] certain errors are too verbose comparing o kern/120487 scsi [sg] scsi_sg incompatible with scanners o sparc/121676 scsi [iscsi] iscontrol do not connect iscsi-target on sparc o kern/123666 scsi [aac] aac(4) will not work with Adaptec SAS RAID 3805 o kern/123674 scsi [ahc] ahc driver dumping 10 problems total. From owner-freebsd-scsi@FreeBSD.ORG Thu Jun 26 06:23:56 2008 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 8CD4A106567B for ; Thu, 26 Jun 2008 06:23:56 +0000 (UTC) (envelope-from mb@lunetics.com) Received: from mx1.dui.nkhosting.net (mx1.dui.nkhosting.net [213.9.94.26]) by mx1.freebsd.org (Postfix) with ESMTP id 235C78FC19 for ; Thu, 26 Jun 2008 06:23:55 +0000 (UTC) (envelope-from mb@lunetics.com) Received: from localhost (localhost [127.0.0.1]) by mx1.dui.nkhosting.net (Postfix) with ESMTP id 87ED31A015FA5 for ; Thu, 26 Jun 2008 05:40:44 +0200 (CEST) Received: from mx1.dui.nkhosting.net ([127.0.0.1]) by localhost ( [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 27412-02 for ; Thu, 26 Jun 2008 05:40:44 +0200 (CEST) Received: from druidPC (ip-88-152-178-221.hsi.ish.de [88.152.178.221]) by mx1.dui.nkhosting.net (Postfix) with ESMTP id 9315E1A015F1E for ; Thu, 26 Jun 2008 05:40:43 +0200 (CEST) From: "Lunetics Networks" To: Date: Thu, 26 Jun 2008 05:40:39 +0200 Message-ID: <0d4601c8d73e$679b3bf0$36d1b3d0$@com> MIME-Version: 1.0 X-Mailer: Microsoft Office Outlook 12.0 thread-index: AcjXPmbpg9V9wOttTmCfd+Kg0oB/kg== Content-Language: en-us Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: aac0 / adaptec 4805SAS problem / Timeout X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 26 Jun 2008 06:23:56 -0000 Hello. I got the following problem with Freebsd 7.0-Release. I got a Adaptec 4805 SAS controller + 6 Samsung Sata Harddisks (HD250HJ). Almost all few hours, the system freezes for like 1-2 minutes and I see the following output in the messages log: Jun 26 01:49:32 friedhelm kernel: aac0: COMMAND 0xc64e5300 TIMEOUT AFTER 72 SECONDS Jun 26 01:49:32 friedhelm kernel: aac0: COMMAND 0xc64e7080 TIMEOUT AFTER 65 SECONDS Jun 26 01:49:32 friedhelm kernel: aac0: COMMAND 0xc64e8000 TIMEOUT AFTER 45 SECONDS Jun 26 01:49:32 friedhelm kernel: aac0: COMMAND 0xc64ea0c0 TIMEOUT AFTER 45 SECONDS Jun 26 01:49:32 friedhelm kernel: aac0: COMMAND 0xc64ea940 TIMEOUT AFTER 43 SECONDS Jun 26 01:49:32 friedhelm kernel: aac0: COMMAND 0xc64e4d40 TIMEOUT AFTER 43 SECONDS Jun 26 01:49:32 friedhelm kernel: aac0: COMMAND 0xc64e5180 TIMEOUT AFTER 43 SECONDS Jun 26 01:49:32 friedhelm kernel: aac0: COMMAND 0xc64e5600 TIMEOUT AFTER 43 SECONDS Any idea what causes this? Attached some output from dmesg and arcconf. aac0: mem 0xdfe00000-0xdfffffff irq 18 at device 14.0 on pci6 aac0: New comm. interface enabled aac0: [ITHREAD] aac0: Adaptec 4805SAS, aac driver 2.0.0-1 aac0: Error 5 sending VMIoctl command aacd0: on aac0 aacd0: 953186MB (1952124928 sectors) and some Infos from Arcconf: arcconf getconfig 1 Controllers found: 1 ---------------------------------------------------------------------- Controller information ---------------------------------------------------------------------- Controller Status : Optimal Channel description : SAS/SATA Controller Model : Adaptec 4805SAS Controller Serial Number : 6A110CA43F9 Physical Slot : 0 Temperature : 33 C/ 91 F (Normal) Installed memory : 128 MB Copyback : Disabled Background consistency check : Enabled Automatic Failover : Enabled Defunct disk drive count : 0 Logical devices/Failed/Degraded : 1/0/1 -------------------------------------------------------- Controller Version Information -------------------------------------------------------- BIOS : 5.2-0 (15323) Firmware : 5.2-0 (15323) Driver : 0.0-0 (0) Boot Flash : 5.2-0 (15323) -------------------------------------------------------- Controller Battery Information -------------------------------------------------------- Status : Not Installed ---------------------------------------------------------------------- Logical device information ---------------------------------------------------------------------- Logical device number 0 Logical device name : imgserver RAID level : 6 XOR Status of logical device : Degraded Size : 953186 MB Stripe-unit size : 256 KB Read-cache mode : Enabled Write-cache mode : Disabled (write-through) Write-cache setting : Enabled (write-back) Partitioned : Yes Protected by Hot-Spare : No Bootable : Yes Failed stripes : Yes -------------------------------------------------------- Logical device segment information -------------------------------------------------------- Segment 0 : Present (0,0) Segment 1 : Present (0,1) Segment 2 : Present (0,2) Segment 3 : Present (0,3) Segment 4 : Present (0,4) Segment 5 : Present (0,5) ---------------------------------------------------------------------- Physical Device information ---------------------------------------------------------------------- Device #0 Device is a Hard drive State : Online Supported : Yes Transfer Speed : SATA 1.5 Gb/s Reported Channel,Device : 0,0 Vendor : SAMSUNG Model : HD250HJ Firmware : FH100-06 Size : 238475 MB Write Cache : Enabled (write-back) FRU : None S.M.A.R.T. : No Device #1 Device is a Hard drive State : Online Supported : Yes Transfer Speed : SATA 1.5 Gb/s Reported Channel,Device : 0,1 Vendor : SAMSUNG Model : HD250HJ Firmware : FH100-06 Size : 238475 MB Write Cache : Enabled (write-back) FRU : None S.M.A.R.T. : No Device #2 Device is a Hard drive State : Online Supported : Yes Transfer Speed : SATA 1.5 Gb/s Reported Channel,Device : 0,2 Vendor : SAMSUNG Model : HD250HJ Firmware : FH100-05 Size : 238475 MB Write Cache : Enabled (write-back) FRU : None S.M.A.R.T. : No Device #3 Device is a Hard drive State : Online Supported : Yes Transfer Speed : SATA 1.5 Gb/s Reported Channel,Device : 0,3 Vendor : SAMSUNG Model : HD250HJ Firmware : FH100-05 Size : 238475 MB Write Cache : Enabled (write-back) FRU : None S.M.A.R.T. : No Device #4 Device is a Hard drive State : Online Supported : Yes Transfer Speed : SATA 1.5 Gb/s Reported Channel,Device : 0,4 Vendor : SAMSUNG Model : HD250HJ Firmware : FH100-05 Size : 238475 MB Write Cache : Enabled (write-back) FRU : None S.M.A.R.T. : No Device #5 Device is a Hard drive State : Online Supported : Yes Transfer Speed : SATA 1.5 Gb/s Reported Channel,Device : 0,5 Vendor : SAMSUNG Model : HD250HJ Firmware : FH100-05 Size : 238475 MB Write Cache : Enabled (write-back) FRU : None S.M.A.R.T. : No arcconf getlogs 1 DEVICE Controllers found: 1 arcconf getlogs 1 EVENT Controllers found: 1 arcconf getlogs 1 DEAD Controllers found: 1