From owner-freebsd-hardware@FreeBSD.ORG Mon Jul 26 21:00:37 2010 Return-Path: Delivered-To: freebsd-hardware@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 8089F1065679; Mon, 26 Jul 2010 21:00:37 +0000 (UTC) (envelope-from ml@netfence.it) Received: from cp-out7.libero.it (cp-out7.libero.it [212.52.84.107]) by mx1.freebsd.org (Postfix) with ESMTP id E66788FC15; Mon, 26 Jul 2010 21:00:36 +0000 (UTC) Received: from soth.ventu (151.51.33.62) by cp-out7.libero.it (8.5.107) id 4C4D5BC50011A3DC; Mon, 26 Jul 2010 22:49:25 +0200 Received: from alamar.ventu (alamar.ventu [10.1.2.18]) by soth.ventu (8.14.4/8.14.3) with ESMTP id o6QKnPjb027239; Mon, 26 Jul 2010 22:49:25 +0200 (CEST) (envelope-from ml@netfence.it) Message-ID: <4C4DF4D5.7000701@netfence.it> Date: Mon, 26 Jul 2010 22:49:25 +0200 From: Andrea Venturoli User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; it-IT; rv:1.9.1.11) Gecko/20100724 Thunderbird/3.0.6 MIME-Version: 1.0 To: Xin LI References: <4BBA00BC.6040809@netfence.it> In-Reply-To: Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Cc: scottl@FreeBSD.org, freebsd-hardware@FreeBSD.org Subject: Re: Support for Intel SRCSASJV X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 26 Jul 2010 21:00:37 -0000 Il 04/05/10 21:54, Xin LI ha scritto: > On Mon, Apr 5, 2010 at 8:24 AM, Andrea Venturoli wrote: >> Hello. >> >> Is the SAS controller in subject supported? >> To what level? >> Can it just run? >> Is there management software available? >> Can at least RAID status be checked? >> >> I'd like to run a RAID5 on that. > > I think it was LSI 1078 (mfi(4)?) ? I don't have my hands on the > hardware though, if you have the hardware consider giving us a > feedback, thanks! I've finally put my hands on this. So far, so good (although the box is not in production yet). I've noticed some delay at boot, although I cannot tell if this is mfi related. Here's the requested feedback: > # dmesg|grep mfi > mfi0: port 0x3000-0x30ff mem 0xb1c00000-0xb1c3ffff,0xb1c40000-0xb1c7ffff irq 24 at device 0.0 on pci2 > mfi0: Megaraid SAS driver Ver 3.00 > mfi0: 1772 (333483265s/0x0020/info) - Shutdown command received from host > mfi0: 1773 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/1006/8086) > mfi0: 1774 (boot + 3s/0x0020/info) - Firmware version 1.40.92-0746 > mfi0: 1775 (boot + 3s/0x0020/info) - Board Revision > mfi0: 1776 (boot + 32s/0x0010/info) - Connector Int.Ports 0-3 (loc=2 sasMux=0x0) is active > mfi0: 1777 (boot + 32s/0x0010/info) - Connector Int.Ports 4-7 (loc=2 sasMux=0x1) is active > mfi0: 1778 (boot + 32s/0x0002/info) - Inserted: PD 11(e0xff/s17) > mfi0: 1779 (boot + 32s/0x0002/info) - Inserted: PD 11(e0xff/s17) Info: enclPd=ffff, scsiType=0, portMap=01, sasAddr=5000cca00f19fb45,0000000000000000 > mfi0: 1780 (boot + 32s/0x0002/info) - Inserted: PD 12(e0xff/s18) > mfi0: 1781 (boot + 32s/0x0002/info) - Inserted: PD 12(e0xff/s18) Info: enclPd=ffff, scsiType=0, portMap=00, sasAddr=5000cca00f14a935,0000000000000000 > mfi0: 1782 (boot + 32s/0x0002/info) - Inserted: PD 13(e0xff/s19) > mfi0: 1783 (boot + 32s/0x0002/info) - Inserted: PD 13(e0xff/s19) Info: enclPd=ffff, scsiType=0, portMap=03, sasAddr=5000cca00f187d45,0000000000000000 > mfi0: 1784 (boot + 32s/0x0002/info) - Inserted: PD 14(e0xff/s20) > mfi0: 1785 (boot + 32s/0x0002/info) - Inserted: PD 14(e0xff/s20) Info: enclPd=ffff, scsiType=0, portMap=02, sasAddr=5000cca00f15807d,0000000000000000 > mfi0: 1786 (333483308s/0x0020/info) - Time established as 07/26/10 18:15:08; (35 seconds since power on) > mfi0: 1787 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/1006/8086) > mfi0: 1788 (boot + 3s/0x0020/info) - Firmware version 1.40.92-0746 > mfi0: 1789 (boot + 3s/0x0020/info) - Board Revision > mfi0: 1790 (boot + 32s/0x0010/info) - Connector Int.Ports 0-3 (loc=2 sasMux=0x0) is active > mfi0: 1791 (boot + 32s/0x0010/info) - Connector Int.Ports 4-7 (loc=2 sasMux=0x1) is active > mfi0: 1792 (boot + 32s/0x0002/info) - Inserted: PD 11(e0xff/s17) > mfi0: 1793 (boot + 32s/0x0002/info) - Inserted: PD 11(e0xff/s17) Info: enclPd=ffff, scsiType=0, portMap=01, sasAddr=5000cca00f19fb45,0000000000000000 > mfi0: 1794 (boot + 32s/0x0002/info) - Inserted: PD 12(e0xff/s18) > mfi0: 1795 (boot + 32s/0x0002/info) - Inserted: PD 12(e0xff/s18) Info: enclPd=ffff, scsiType=0, portMap=00, sasAddr=5000cca00f14a935,0000000000000000 > mfi0: 1796 (boot + 32s/0x0002/info) - Inserted: PD 13(e0xff/s19) > mfi0: 1797 (boot + 32s/0x0002/info) - Inserted: PD 13(e0xff/s19) Info: enclPd=ffff, scsiType=0, portMap=03, sasAddr=5000cca00f187d45,0000000000000000 > mfi0: 1798 (boot + 32s/0x0002/info) - Inserted: PD 14(e0xff/s20) > mfi0: 1799 (boot + 32s/0x0002/info) - Inserted: PD 14(e0xff/s20) Info: enclPd=ffff, scsiType=0, portMap=02, sasAddr=5000cca00f15807d,0000000000000000 > mfi0: 1800 (333483496s/0x0020/info) - Time established as 07/26/10 18:18:16; (35 seconds since power on) > mfi0: 1801 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/1006/8086) > mfi0: 1802 (boot + 3s/0x0020/info) - Firmware version 1.40.92-0746 > mfi0: 1803 (boot + 3s/0x0020/info) - Board Revision > mfi0: 1804 (boot + 32s/0x0010/info) - Connector Int.Ports 0-3 (loc=2 sasMux=0x0) is active > mfi0: 1805 (boot + 32s/0x0010/info) - Connector Int.Ports 4-7 (loc=2 sasMux=0x1) is active > mfi0: 1806 (boot + 32s/0x0002/info) - Inserted: PD 11(e0xff/s17) > mfi0: 1807 (boot + 32s/0x0002/info) - Inserted: PD 11(e0xff/s17) Info: enclPd=ffff, scsiType=0, portMap=01, sasAddr=5000cca00f19fb45,0000000000000000 > mfi0: 1808 (boot + 32s/0x0002/info) - Inserted: PD 12(e0xff/s18) > mfi0: 1809 (boot + 32s/0x0002/info) - Inserted: PD 12(e0xff/s18) Info: enclPd=ffff, scsiType=0, portMap=00, sasAddr=5000cca00f14a935,0000000000000000 > mfi0: 1810 (boot + 32s/0x0002/info) - Inserted: PD 13(e0xff/s19) > mfi0: 1811 (boot + 32s/0x0002/info) - Inserted: PD 13(e0xff/s19) Info: enclPd=ffff, scsiType=0, portMap=03, sasAddr=5000cca00f187d45,0000000000000000 > mfi0: 1812 (boot + 32s/0x0002/info) - Inserted: PD 14(e0xff/s20) > mfi0: 1813 (boot + 32s/0x0002/info) - Inserted: PD 14(e0xff/s20) Info: enclPd=ffff, scsiType=0, portMap=02, sasAddr=5000cca00f15807d,0000000000000000 > mfi0: [ITHREAD] > mfi0: 1814 (333483629s/0x0020/info) - Time established as 07/26/10 18:20:29; (35 seconds since power on) > mfid0: on mfi0 > mfid0: 1284597MB (2630854656 sectors) RAID volume '' is optimal Of course it's detected as a generic LSI MegaSAS 1078, since the specific PCI IDs are not there. No problem here: I'm reporting them just in case you want to include them in an updated driver version. > # pciconf -lv > ... > mfi0@pci0:2:0:0: class=0x010400 card=0x10068086 chip=0x00601000 rev=0x04 hdr=0x00 > vendor = 'LSI Logic (Was: Symbios Logic, NCR)' > device = 'SAS1078 PCI-X Fusion-MPT SAS' > class = mass storage > subclass = RAID > ... > # mfiutil show adapter > mfi0 Adapter: > Product Name: Intel(R) RAID Controller SRCSASJV > Serial Number: P054824609 > Firmware: 11.0.1-0022 > RAID Levels: JBOD, RAID0, RAID1, RAID5, RAID6, RAID10, RAID50 > Battery Backup: not present > NVRAM: 32K > Onboard Memory: 512M > Minimum Stripe: 8K > Maximum Stripe: 1M > # mfiutil show firmware > mfi0 Firmware Package Version: 11.0.1-0022 > mfi0 Firmware Images: > Name Version Date Time Status > APP 1.40.92-0746 Nov 3 2009 12:10:24 active > BIOS 2.07.00 Aug 26 2009 15:05:19 active > BCON 2.2-19-e_10-Rel Jun 30 2009 11:59:33 active > PCLI 01.40-010:#%00008 Aug 21 2009 00:10:02 active > BTBL 1.00.00.01-0011 Nov 27 2007 18:29:20 active I really like mfiutil. Any chance it will be merged into 7.x? If you need other data, just ask :-) bye & Thanks av. From owner-freebsd-hardware@FreeBSD.ORG Tue Jul 27 10:41:10 2010 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id EBA26106564A for ; Tue, 27 Jul 2010 10:41:10 +0000 (UTC) (envelope-from schalexey@gmail.com) Received: from mail-vw0-f54.google.com (mail-vw0-f54.google.com [209.85.212.54]) by mx1.freebsd.org (Postfix) with ESMTP id A056D8FC08 for ; Tue, 27 Jul 2010 10:41:10 +0000 (UTC) Received: by vws7 with SMTP id 7so4103747vws.13 for ; Tue, 27 Jul 2010 03:41:09 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:received:received:date:message-id :subject:from:to:content-type:content-transfer-encoding; bh=F/SLq6STS9ogNHa8d6oAU+yWt0zQ6cEDTzBOUz5AInk=; b=ViR2q5zqMfn4AP+ueAoWeE65pIjObd1BAsRP9lAl1PtM3Y3xQB08XWKI8AtHbd/pPf 0K5dEUexax5GZeoNSDEMuZXTX6gO+2CQM3ffM1cT32GFTnwy6fQtn0BxWH9PAXu5tvz0 O3qb/lQSfw/rBJNuDk2aX+Qgppvr3dao4Q27I= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:date:message-id:subject:from:to:content-type :content-transfer-encoding; b=STg4U12bMyN7UU9AIw8PayiTtz5BQwFwCbw7KrapIiJvq+1HMa8p165xLNi+uEOyZK 6uL9Se6NObm/GPEzbajzWjE4Het2ZRNaufK3pLWoX5KBriy4i5oRGqYflfKlkpfm5uDU KvPUKvSz9ZkT6f/fJOYFldN87VmWpxtR4PJME= MIME-Version: 1.0 Received: by 10.220.169.131 with SMTP id z3mr10079523vcy.1.1280225420402; Tue, 27 Jul 2010 03:10:20 -0700 (PDT) Received: by 10.220.43.198 with HTTP; Tue, 27 Jul 2010 03:10:20 -0700 (PDT) Date: Tue, 27 Jul 2010 16:10:20 +0600 Message-ID: From: =?KOI8-R?B?4czFy9PFyiD9xdLCwcvP1w==?= To: freebsd-hardware@freebsd.org Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: quoted-printable Subject: Trables with RTL8169/8119 X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 27 Jul 2010 10:41:11 -0000 I have old machine with: FreeBSD data-srv.HOME 8.0-RELEASE FreeBSD 8.0-RELEASE #1: Sun Jul 25 17:49:20 YEKST 2010 root@data-srv.HOME:/usr/src/sys/i386/compile/GENERIC i386 and 2 NIC interfaces: re0@pci0:0:10:0: class=3D0x020000 card=3D0x816910ec chip=3D0x816910e= c rev=3D0x10 hdr=3D0x00 vendor =3D 'Realtek Semiconductor' device =3D 'Single Gigabit LOM Ethernet Controller (RTL8119)' class =3D network subclass =3D ethernet rl0@pci0:0:12:0: class=3D0x020000 card=3D0x813911f6 chip=3D0x813910e= c rev=3D0x10 hdr=3D0x00 vendor =3D 'Realtek Semiconductor' device =3D 'Realtek RTL8139 Family PCI Fast Ethernet NIC (RTL-8139/8139C/8139C)' class =3D network subclass =3D ethernet In the beginning rl0 had conflict with onboard sound, as result sound was disabled. After that both card begin work, but re0 don=92t reaction on any action (plug|unplug cable) in dmesg and don=92t ping from other PC in local. data-srv# grep ^re /var/run/dmesg.boot real memory =3D 402653184 (384 MB) re0: port 0xd000-0xd0ff mem 0xe7001000-0xe70010ff irq 12 at device 10.0 on pci0 re0: version:1.80 re0: Ethernet address: 00:e0:52:95:90:99 re0: Ethernet address: 00:e0:52:95:90:99 re0: [ITHREAD] data-srv# grep ^rl /var/run/dmesg.boot rl0: port 0xd400-0xd4ff mem 0xe7003000-0xe70030ff irq 10 at device 12.0 on pci0 rlphy0: PHY 0 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:80:48:26:a0:3a rl0: [ITHREAD] re0: flags=3D8843 metric 0 mtu 1500 ether 00:e0:52:95:90:99 inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255 media: Ethernet autoselect status: no carrier rl0: flags=3D8843 metric 0 mtu 1500 options=3D8 ether 00:80:48:26:a0:3a inet 192.168.1.2 netmask 0xffffff00 broadcast 192.168.1.255 media: Ethernet autoselect (100baseTX ) status: active Driver taken from Realteck site (v 1.8), builded as kernel module. PS: sorry for bad English. From owner-freebsd-hardware@FreeBSD.ORG Tue Jul 27 17:22:35 2010 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 0AD30106566C for ; Tue, 27 Jul 2010 17:22:35 +0000 (UTC) (envelope-from pyunyh@gmail.com) Received: from mail-pz0-f54.google.com (mail-pz0-f54.google.com [209.85.210.54]) by mx1.freebsd.org (Postfix) with ESMTP id CBC418FC08 for ; Tue, 27 Jul 2010 17:22:34 +0000 (UTC) Received: by pzk7 with SMTP id 7so1726890pzk.13 for ; Tue, 27 Jul 2010 10:22:34 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:received:received:received:from:date:to:cc :subject:message-id:reply-to:references:mime-version:content-type :content-disposition:content-transfer-encoding:in-reply-to :user-agent; bh=NrUiPMwuknvAwLzDvyWfwqTD1V1ZL8/fn31P++r3dgg=; b=a3Dey1nOXMBC8t+Ufbkw/yGKLNY25HradbfNpjOUetunP0GAvlOXPicrQITGYoUKU2 XbbwfwIxhJ6/TSVautFuAgLb0m9964oNSibRPJabjVngtWwBqlNyfuBoJ5aY6kQxvhcy BIUt3lbcDb4x5914+RCC6Jwp4bWCQjHNiUcAY= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=from:date:to:cc:subject:message-id:reply-to:references:mime-version :content-type:content-disposition:content-transfer-encoding :in-reply-to:user-agent; b=V0N0CVjMWPTm1dVlSljIGzqjkJNHShfYVSw3auXUXe44JHyjGJOLHnF7GfqlxwwMNd 8wv6SHHSDgyi44u/hDLaU1te8bLnlBPKawg1c78UQQRntRbqDrZNFzHWiqmpyqMBEYS/ W7/JJr9v/CdFksJoVfwhyEPP2iJxp4jHJ+2y8= Received: by 10.142.142.15 with SMTP id p15mr4822268wfd.254.1280251353937; Tue, 27 Jul 2010 10:22:33 -0700 (PDT) Received: from pyunyh@gmail.com ([174.35.1.224]) by mx.google.com with ESMTPS id 23sm5901681wfa.22.2010.07.27.10.22.32 (version=TLSv1/SSLv3 cipher=RC4-MD5); Tue, 27 Jul 2010 10:22:32 -0700 (PDT) Received: by pyunyh@gmail.com (sSMTP sendmail emulation); Tue, 27 Jul 2010 10:21:49 -0700 From: Pyun YongHyeon Date: Tue, 27 Jul 2010 10:21:49 -0700 To: =?utf-8?B?0JDQu9C10LrRgdC10Lkg0KnQtdGA0LHQsNC60L7Qsg==?= Message-ID: <20100727172149.GB6209@michelle.cdnetworks.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: User-Agent: Mutt/1.4.2.3i Cc: freebsd-hardware@freebsd.org Subject: Re: Trables with RTL8169/8119 X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: pyunyh@gmail.com List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 27 Jul 2010 17:22:35 -0000 On Tue, Jul 27, 2010 at 04:10:20PM +0600, ?????????????? ???????????????? wrote: > I have old machine with: > FreeBSD data-srv.HOME 8.0-RELEASE FreeBSD 8.0-RELEASE #1: Sun Jul 25 > 17:49:20 YEKST 2010 > root@data-srv.HOME:/usr/src/sys/i386/compile/GENERIC i386 > > and 2 NIC interfaces: > > re0@pci0:0:10:0: class=0x020000 card=0x816910ec chip=0x816910ec > rev=0x10 hdr=0x00 > vendor = 'Realtek Semiconductor' > device = 'Single Gigabit LOM Ethernet Controller (RTL8119)' > class = network > subclass = ethernet > rl0@pci0:0:12:0: class=0x020000 card=0x813911f6 chip=0x813910ec > rev=0x10 hdr=0x00 > vendor = 'Realtek Semiconductor' > device = 'Realtek RTL8139 Family PCI Fast Ethernet NIC > (RTL-8139/8139C/8139C)' > class = network > subclass = ethernet > > In the beginning rl0 had conflict with onboard sound, as result sound > was disabled. > After that both card begin work, but re0 don’t reaction on any action > (plug|unplug cable) in dmesg and don’t ping from other PC in local. > It's hard to guess what's going in here mainly because I'm not familiar with vendor code. > data-srv# grep ^re /var/run/dmesg.boot > real memory = 402653184 (384 MB) > re0: port 0xd000-0xd0ff mem > 0xe7001000-0xe70010ff irq 12 at device 10.0 on pci0 > re0: version:1.80 > re0: Ethernet address: 00:e0:52:95:90:99 > re0: Ethernet address: 00:e0:52:95:90:99 > re0: [ITHREAD] > > data-srv# grep ^rl /var/run/dmesg.boot > rl0: port 0xd400-0xd4ff mem > 0xe7003000-0xe70030ff irq 10 at device 12.0 on pci0 > rlphy0: PHY 0 on miibus0 > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > rl0: Ethernet address: 00:80:48:26:a0:3a > rl0: [ITHREAD] > > re0: flags=8843 metric 0 mtu 1500 > ether 00:e0:52:95:90:99 > inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255 > media: Ethernet autoselect > status: no carrier > rl0: flags=8843 metric 0 mtu 1500 > options=8 > ether 00:80:48:26:a0:3a > inet 192.168.1.2 netmask 0xffffff00 broadcast 192.168.1.255 > media: Ethernet autoselect (100baseTX ) > status: active > Driver taken from Realteck site (v 1.8), builded as kernel module. > Why you want to use vendor driver? 8.1-RELEASE should support almost all RealTek variants. Also note, vendor code effectively disables all offload features of controller and make it work like dumb RTL8139. From owner-freebsd-hardware@FreeBSD.ORG Fri Jul 30 11:25:56 2010 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 1E6E2106564A for ; Fri, 30 Jul 2010 11:25:56 +0000 (UTC) (envelope-from prateeks@cse.iitb.ac.in) Received: from smtp1.iitb.ac.in (smtp1.iitb.ac.in [59.162.23.13]) by mx1.freebsd.org (Postfix) with SMTP id 2C89F8FC12 for ; Fri, 30 Jul 2010 11:25:54 +0000 (UTC) Received: (qmail 11537 invoked from network); 30 Jul 2010 16:29:12 +0530 Received: from unknown (HELO ldns2.iitb.ac.in) (10.200.12.2) by smtp1.iitb.ac.in with SMTP; 30 Jul 2010 16:29:12 +0530 Received: (qmail 25862 invoked by uid 510); 30 Jul 2010 16:29:12 +0530 Received: from 10.200.12.201 by ldns2 (envelope-from , uid 501) with qmail-scanner-2.08 ({clamdscan: 0.96.1-exp-debug/11463} spamassassin: 3.3.1. Clear:RC:1(10.200.12.201):SA:0(0.0/5.5):. Processed in 4.64571 secs); 30 Jul 2010 10:59:12 -0000 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on ldns2.iitb.ac.in X-Spam-Level: X-Spam-Status: No, score=0.0 required=5.5 tests=IITB_ORIG,PROPER_IITB_MSGID, T_RP_MATCHES_RCVD autolearn=no version=3.3.1 X-Envelope-From: prateeks@cse.iitb.ac.in Received: from unknown (HELO smtp-auth.iitb.ac.in) (10.200.12.201) by ldns2.iitb.ac.in with SMTP; 30 Jul 2010 16:29:07 +0530 Received: from nsl-21.cse.iitb.ac.in (nsl-21.cse.iitb.ac.in [10.105.12.21]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by smtp-auth.iitb.ac.in (Postfix) with ESMTP id B686E13906 for ; Fri, 30 Jul 2010 16:29:07 +0530 (IST) Date: Fri, 30 Jul 2010 16:29:07 +0530 (IST) From: Prateek Sharma To: freebsd-hardware@"freebsd.org." Message-ID: User-Agent: Alpine 2.00 (DEB 1167 2008-08-23) MIME-Version: 1.0 Content-Type: TEXT/PLAIN; format=flowed; charset=US-ASCII Cc: Subject: LSI SAS 9200 series X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 30 Jul 2010 11:25:56 -0000 Hello, I am trying to install FreeBSD-8.1 on a server with the LSI SAS 9200 disk controller card. Before the partitioning step the installer says "disks not found.". However, just after freebsd boots , i get the diagnostic message saying something like: "Drive C: is disk ad0 Drive D: is disk ad1 .. " So are my disks getting detected or not? Does anyone know if the card is supported by FreeBSD? Is there any way i can get this to work? Thanks From owner-freebsd-hardware@FreeBSD.ORG Fri Jul 30 11:54:22 2010 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id E6AA91065677 for ; Fri, 30 Jul 2010 11:54:21 +0000 (UTC) (envelope-from michael@fuckner.net) Received: from dedihh.fuckner.net (dedihh.fuckner.net [81.209.183.161]) by mx1.freebsd.org (Postfix) with ESMTP id 5CBBD8FC19 for ; Fri, 30 Jul 2010 11:54:21 +0000 (UTC) Received: from dedihh.fuckner.net (localhost [127.0.0.1]) by dedihh.fuckner.net (Postfix) with ESMTP id DE27924295; Fri, 30 Jul 2010 13:34:25 +0200 (CEST) X-Virus-Scanned: amavisd-new at fuckner.net Received: from dedihh.fuckner.net ([127.0.0.1]) by dedihh.fuckner.net (dedihh.fuckner.net [127.0.0.1]) (amavisd-new, port 10024) with SMTP id dGO9L2XPXES5; Fri, 30 Jul 2010 13:34:19 +0200 (CEST) Received: from tkd14.delnet (unknown [85.183.0.20]) by dedihh.fuckner.net (Postfix) with ESMTPA id 8961E24283; Fri, 30 Jul 2010 13:34:19 +0200 (CEST) Message-ID: <4C52B8C8.3060504@fuckner.net> Date: Fri, 30 Jul 2010 13:34:32 +0200 From: Michael Fuckner User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.7) Gecko/20100720 Fedora/3.1.1-1.fc13 Thunderbird/3.1.1 MIME-Version: 1.0 To: Prateek Sharma References: In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-hardware@freebsd.org Subject: Re: LSI SAS 9200 series X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 30 Jul 2010 11:54:22 -0000 On 07/30/2010 12:59 PM, Prateek Sharma wrote: > Hello, > I am trying to install FreeBSD-8.1 on a server with the LSI SAS 9200 > disk controller card. Before the partitioning step the installer says > "disks not found.". > > However, just after freebsd boots , i get the diagnostic message saying > something like: > "Drive C: is disk ad0 > Drive D: is disk ad1 > .. " So are my disks getting detected or not? Does anyone know if the > card is supported by FreeBSD? > Is there any way i can get this to work? it is recognized by the Bios, but not the OS, since the 6GBit LSI Chips (2004, 2008, 2108) are currently unsupported by FreeBSD :( Regards, Michael!