From owner-freebsd-multimedia@FreeBSD.ORG Sun Aug 28 18:51:29 2011 Return-Path: Delivered-To: freebsd-multimedia@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 6124C106564A for ; Sun, 28 Aug 2011 18:51:29 +0000 (UTC) (envelope-from nox@jelal.kn-bremen.de) Received: from smtp.kn-bremen.de (gelbbaer.kn-bremen.de [78.46.108.116]) by mx1.freebsd.org (Postfix) with ESMTP id 1DD7F8FC16 for ; Sun, 28 Aug 2011 18:51:28 +0000 (UTC) Received: by smtp.kn-bremen.de (Postfix, from userid 10) id 026B51E0022F; Sun, 28 Aug 2011 20:51:27 +0200 (CEST) Received: from triton8.kn-bremen.de (noident@localhost [127.0.0.1]) by triton8.kn-bremen.de (8.14.4/8.14.3) with ESMTP id p7SIoHoZ073765; Sun, 28 Aug 2011 20:50:17 +0200 (CEST) (envelope-from nox@triton8.kn-bremen.de) Received: (from nox@localhost) by triton8.kn-bremen.de (8.14.4/8.14.3/Submit) id p7SIoHLR073764; Sun, 28 Aug 2011 20:50:17 +0200 (CEST) (envelope-from nox) From: Juergen Lock Date: Sun, 28 Aug 2011 20:50:17 +0200 To: Juergen Lock Message-ID: <20110828185016.GA73747@triton8.kn-bremen.de> References: <20110820170249.GA96844@triton8.kn-bremen.de> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20110820170249.GA96844@triton8.kn-bremen.de> User-Agent: Mutt/1.5.21 (2010-09-15) Cc: freebsd-multimedia@FreeBSD.org Subject: Re: A better remote for pctv452e/s2-3600, dib0700/nova-td (dvb-s2/t) X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 28 Aug 2011 18:51:29 -0000 Sorry for following up to myself but... On Sat, Aug 20, 2011 at 07:02:49PM +0200, Juergen Lock wrote: > Hi! > > I just tried this so I wanted to share... Both my dvb-s2 (TechnoTrend > S2-3600 and most likely also the original PCTV 452e) and my new > dual dvb-t tuner Hauppauge Nova-TD (see > > http://wiki.freebsd.org/WebcamCompat > > ) work with an universal remote configured as an rc5 remote Hauppauge > PVR-350 (I used a Logitech Harmony but other universal remotes > should also work as long as they can use the PVR-350 config), if I > set the /usr/local/etc/rc_keymaps/haupp keymap using ir-keymap(1) > installed by the multimedia/v4l-utils port: > > ir-keymap -d /dev/input/event0 -w /usr/local/etc/rc_keymaps/haupp > Actually it's ir-keytable not ir-keymap, sorry. > (you can ignore the error about setting protocol which doesn't work > since webcamd doesn't emulate Linux' /sys nodes), and then configure > lirc for devinput as described in the lirc port's pkg-message, quote: > > webcamd 3.0.0.1 now supports /dev/input/eventX (X there can be for > example 0, 8, 16 etc) and uses it exclusively for almost all tuners, > only mceusb IR-only devices now support both interfaces. So if you > don't get a /dev/lircX device node anymore and want to make lirc > use a remote with such a tuner you now need the lirc devinput driver, > if you start lircd via the rc.d script set lircd_flags and lircd_device > in rc.conf(5), like: > > lircd_flags="-H devinput" > lircd_device="/dev/input/event0" > > The example lircd.conf includes the devinput config file too so if > all goes well irw(1) should still work with such tuners and show > buttons pressed [...] > > (and yes, irw(1) works with the PVR350 config.) > > Btw I used this particular remote since a) it's rc5 (which both > these tuners' shipped remotes use) and b) it was one with one of > the most buttons out of the available rc5 keymaps in > /usr/local/etc/rc_keymaps so I can assign extra buttons to custom > functions using lirc too (which I still need to do, I want to define > at least buttons to start either of vdr-sxfe or xbmc...) > > Enjoy, :) > Juergen From owner-freebsd-multimedia@FreeBSD.ORG Mon Aug 29 11:07:12 2011 Return-Path: Delivered-To: freebsd-multimedia@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id F1A96106567A for ; Mon, 29 Aug 2011 11:07:12 +0000 (UTC) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id E01818FC24 for ; Mon, 29 Aug 2011 11:07:12 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.4/8.14.4) with ESMTP id p7TB7CLx089334 for ; Mon, 29 Aug 2011 11:07:12 GMT (envelope-from owner-bugmaster@FreeBSD.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.4/8.14.4/Submit) id p7TB7C53089332 for freebsd-multimedia@FreeBSD.org; Mon, 29 Aug 2011 11:07:12 GMT (envelope-from owner-bugmaster@FreeBSD.org) Date: Mon, 29 Aug 2011 11:07:12 GMT Message-Id: <201108291107.p7TB7C53089332@freefall.freebsd.org> X-Authentication-Warning: freefall.freebsd.org: gnats set sender to owner-bugmaster@FreeBSD.org using -f From: FreeBSD bugmaster To: freebsd-multimedia@FreeBSD.org Cc: Subject: Current problem reports assigned to freebsd-multimedia@FreeBSD.org X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 29 Aug 2011 11:07:13 -0000 Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description -------------------------------------------------------------------------------- o ports/159993 multimedia [patch] multimedia/podcatcher: broken with ruby19 o kern/159236 multimedia [pcm] [patch] set PCM_CAP_DEFAULT for the default snd o ports/158987 multimedia multimedia/py-kaa-multimedia: fix build error for grap o kern/158979 multimedia [snd_uadio] snd_uaudio fails to initialize built-in mi o kern/158542 multimedia [snd_hda] hdac0: hdac_get_capabilities: Invalid corb s f kern/158424 multimedia [snd_hda] snd_hda driver doesn't expose 'rec' flag for o ports/158102 multimedia ports/multimedia/mjpegtools triggers internal compiler o ports/157885 multimedia multimedia/mjpegtools 2.0.0 build failure o kern/156726 multimedia [snd_uaudio]: snd_uaudio(4) fails to detach when mixer o kern/156433 multimedia [sound] [patch] OSS4/VPC is broken on 64-bit platforms o kern/156198 multimedia [snd_hda] [hang] loading snd_hda kernel module hangs s o kern/156165 multimedia [hdac] Missing card definition for hdac audio device, o kern/153920 multimedia [sound] [patch] Replace the GPL'd sound/maestro3 heade o kern/153901 multimedia [sound] [patch] Replace the GPL'd emu10k1-alsa.h with o ports/153846 multimedia graphics/libcaca 0.99.beta17 - Hidden dependency on Xl o kern/152622 multimedia [pcm] uaudio recording problem o kern/152500 multimedia [hdac] play interrupt timeout, channel dead o kern/152378 multimedia [sound][patch] Update snd_envy24ht to be MPSAFE and us f ports/150502 multimedia multimedia/gpac-libgpac 0.4.5_4,1 fails to compile on o kern/150284 multimedia [snd_hda] No gain with Audio o kern/149943 multimedia [pcm]: CS4236 audio problem o kern/148741 multimedia [sound] Headphones are deaf (do not work) on Lenovo Th o kern/147504 multimedia [oss] [panic] panic: dev_pager_getpage: map function r o kern/146031 multimedia [snd_hda] race condition when kldunload snd_hda sound o kern/144659 multimedia [pcm] The distortion of the sound playback of music at o kern/143505 multimedia [pcm] FreeBSD 8.0-RELEASE (x64) won't make sound card o kern/141826 multimedia [snd_hda] load of snd_hda module fails o kern/140591 multimedia [PATCH][sound] No sound output on lineout/headphone ja o kern/140453 multimedia [sound] No sound inside Virtualbox on 50% volume o kern/137589 multimedia [snd_uaudio] snd_uaudio.ko (USB audio driver) doesn't o kern/134767 multimedia [sound] [snd_hda] [regression] Sigmatel STAC9205X no s o kern/132848 multimedia [sound] [snd_emu10kx] driver problem with card init, s o kern/132511 multimedia [sound] [snd_hda] Probing ALC888 codec on ASRock K10N7 o kern/129604 multimedia [sound] Sound stops with error: pcm0:virtual:dsp0.vp0: o kern/127131 multimedia [bktr] /usr/src/sys/dev/bktr/bktr_os.c, line 469: wron s kern/125756 multimedia [sound] [patch] cannot detect soft-modem on HDA bus o kern/124319 multimedia [sound] [snd_emu10k1] [regression] Cannot record from o kern/122086 multimedia [sound] maestro sound driver is working, but mixer ini p kern/121156 multimedia [sound] [patch] Turn on inverted external amplifier se o kern/120857 multimedia [sound] [snd_emu10k1] snd_emu10k1 driver issues a warn o kern/120780 multimedia [sound] [snd_hda] snd_hda doesn't work on Dell Latitut o kern/119973 multimedia [sound] [snd_maestro] [regression] snd_maestro only wo o kern/119931 multimedia [sound] No sound card detected on ASUS "K8V-X SE R2.00 o kern/119759 multimedia [sound] [snd_emu10k1] [regression] Can not record anyt f kern/115666 multimedia [sound] Microphone does not work o kern/115300 multimedia [sound] [snd_hda] [regression] snd_hda(4) fails to att o kern/114760 multimedia [sound] [snd_cmi] snd_cmi driver causing sporadic syst o kern/111767 multimedia [sound] ATI SB450 High Definition Audio Controller sou o kern/107516 multimedia [sound] [snd_emu10k1] - skips, clicks and lag after a o kern/107051 multimedia [sound] only 2 channels output works for the ALC850 (o o kern/104874 multimedia [sound] [snd_emu10k1] kldload snd_emu10k1 hangs system o kern/104626 multimedia [sound] FreeBSD 6.2 does not support SoundBlaster Audi o kern/101417 multimedia [sound] 4-speakers output not possible on Asus A8V-Del o kern/100859 multimedia [sound] [snd_ich] snd_ich broken on GIGABYTE 915 syste o kern/98752 multimedia [sound] Intel ich6 82801 FB - on Packard Bell A8810 la o kern/98504 multimedia [sound] Sound is distorted with SB Live 5.1 o kern/98496 multimedia [sound] [snd_ich] some functions don't work in my soun o kern/97609 multimedia [sound] Load Sound Module - VIA8233 - fails o kern/97535 multimedia [sound] [snd_mss] doesn't work in 6.0-RELEASE and abov o kern/96538 multimedia [sound] emu10k1-driver inverts channels o kern/95086 multimedia [sound] uaudio line in problem with sbdm lx o kern/94279 multimedia [sound] [snd_neomagic] snd_neomagic crashes on FreeBSD o kern/93986 multimedia [sound] Acer TravelMate 4652LMi pcm0 channel dead o kern/92512 multimedia [sound] distorted mono output with emu10k1 o kern/87782 multimedia [sound] snd_t4dwave and pcm0:record:0: record interrup s kern/83697 multimedia [sound] [snd_mss] [patch] support, docs added for full o kern/82043 multimedia [sound] snd_emu10k1 - mixer does not work. o kern/81146 multimedia [sound] Sound isn't working AT ALL for Sis7012 onboard o kern/80632 multimedia [sound] pcm driver missing support for CMI8738 auxilla o kern/79912 multimedia [sound] sound broken for 2 VIA chipsets: interrupt sto o kern/79905 multimedia [sound] sis7018 sound module problem o kern/79678 multimedia [sound] sound works except recording from any source o conf/75137 multimedia [sound] add snd_* modules support to /etc/rc.d/mixer f kern/72995 multimedia [sound] Intel ICH2 (82801BA) - sound nearly inaudible o kern/63204 multimedia [sound] /dev/mixer broken with ESS Maestro-2E (still o o kern/60677 multimedia [sound] [patch] No reaction of volume controy key on I s kern/60599 multimedia [bktr] [partial patch] No sound for ATI TV Wonder (ste o kern/37600 multimedia [sound] [partial patch] t4dwave drive doesn't record. o kern/23546 multimedia [sound] [snd_csa] [patch] csa DMA-interrupt problem 79 problems total. From owner-freebsd-multimedia@FreeBSD.ORG Wed Aug 31 08:54:56 2011 Return-Path: Delivered-To: multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id BDD3A1065670 for ; Wed, 31 Aug 2011 08:54:56 +0000 (UTC) (envelope-from 1wkmmr@gmail.com) Received: from mail-pz0-f45.google.com (mail-pz0-f45.google.com [209.85.210.45]) by mx1.freebsd.org (Postfix) with ESMTP id 951868FC08 for ; Wed, 31 Aug 2011 08:54:56 +0000 (UTC) Received: by pzk33 with SMTP id 33so1621911pzk.18 for ; Wed, 31 Aug 2011 01:54:56 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=message-id:date:from:user-agent:mime-version:to:subject :content-type:content-transfer-encoding; bh=KtClSmZaKImrC3QuSU3P8X/TWH2cZsXvhflJK0LDW9Y=; b=Trn6mqMr72dQiRrrU9vY3Nh+PKwWkrnUB+DcDonYAp0w6BIGee4fnPxN9IucClws2R AZVmcntKzn3NuzL5Rs4HhJlikQ0EPotLcgZ8vL5KoE9L9sHWx+DmhFc45Q1WEnzbS58t FGIe5KKNVaAnw+ic+JwrKEpNX63kF8dXVPKjI= Received: by 10.68.33.8 with SMTP id n8mr163863pbi.314.1314779279132; Wed, 31 Aug 2011 01:27:59 -0700 (PDT) Received: from dhcp18.merlin.gs.niigata-u.ac.jp (tf-bsp02.eng.niigata-u.ac.jp. [133.35.85.2]) by mx.google.com with ESMTPS id p7sm271599pbe.0.2011.08.31.01.27.57 (version=SSLv3 cipher=OTHER); Wed, 31 Aug 2011 01:27:58 -0700 (PDT) Message-ID: <4E5DF07D.9000801@gmail.com> Date: Wed, 31 Aug 2011 17:27:41 +0900 From: Mamoru Iwaki <1wkmmr@gmail.com> User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:6.0) Gecko/20110825 Thunderbird/6.0 MIME-Version: 1.0 To: multimedia@FreeBSD.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: Subject: ports/audio/libsamplerate fails package creation X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 Aug 2011 08:54:56 -0000 Hi, I'm trying to create a package of ports/audio/libsamplerate: # New ports collection makefile for: libsamplerate # Date created: 2 February 2003 # Whom: # # $FreeBSD: ports/audio/libsamplerate/Makefile,v 1.25 2011/08/31 00:40:56 sylvio Exp $ but 'make package' fails as follows: test -z "/usr/local/lib/pkgconfig" || /usr/local/bin/gmkdir -p "/usr/local/lib/pkgconfig" /usr/bin/install -c -m 644 samplerate.pc '/usr/local/lib/pkgconfig' install -o root -g wheel -m 444 /mnt2/usr/ports/audio/libsamplerate/work/libsamplerate-0.1.8/doc/*.css /usr/local/share/doc/libsamplerate install -o root -g wheel -m 444 /mnt2/usr/ports/audio/libsamplerate/work/libsamplerate-0.1.8/doc/*.html /usr/local/share/doc/libsamplerate install -o root -g wheel -m 444 /mnt2/usr/ports/audio/libsamplerate/work/libsamplerate-0.1.8/doc/*.png /usr/local/share/doc/libsamplerate ===> Running ldconfig /sbin/ldconfig -m /usr/local/lib ===> Registering installation for libsamplerate-0.1.8 ===> Building package for libsamplerate-0.1.8 tar: libdata/pkgconfig/samplerate.pc: Cannot stat: No such file or directory tar: Error exit delayed from previous errors. pkg_create: make_dist: tar command failed with code 256 *** Error code 1 Stop in /mnt2/usr/ports/audio/libsamplerate. It looks that 'samplerate.pc' was installed into /usr/local/lib/pkgconfig but tried to read from (/usr/local/)libdata/pkgconfig/ I'm not sure what location is intended to install the file. Please check the port. Cheers --- Mamoru Iwaki Japan From owner-freebsd-multimedia@FreeBSD.ORG Wed Aug 31 12:13:42 2011 Return-Path: Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id E79901065674; Wed, 31 Aug 2011 12:13:42 +0000 (UTC) (envelope-from alexvpetrov@gmail.com) Received: from mail-bw0-f54.google.com (mail-bw0-f54.google.com [209.85.214.54]) by mx1.freebsd.org (Postfix) with ESMTP id 46B818FC19; Wed, 31 Aug 2011 12:13:41 +0000 (UTC) Received: by bkat8 with SMTP id t8so1072460bka.13 for ; Wed, 31 Aug 2011 05:13:41 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=from:to:subject:date:user-agent:cc:mime-version:content-type :content-transfer-encoding:message-id; bh=8q45IJJMBu4vLl2Wb7t4mkeQ21Y7KMFveKA3pac/vxY=; b=BmcD1T6XITaCjSsItSZBukpHDvU3uv5pqdMfkRvH2Ez3db3fVMym5idY7m4LgBqpbf sqZhP2bxIjAQ4kDBUgZJffSrXnO+8/vBFjt83QVeSdABF0e0/XlFwKixNwrYTU56X/jq Gf0Zt0wwzu3EZMWz7De+nhkJ3kyjFQg2dv880= Received: by 10.204.157.19 with SMTP id z19mr181218bkw.254.1314791085343; Wed, 31 Aug 2011 04:44:45 -0700 (PDT) Received: from alex.super ([91.195.101.86]) by mx.google.com with ESMTPS id j1sm341684bks.41.2011.08.31.04.44.42 (version=TLSv1/SSLv3 cipher=OTHER); Wed, 31 Aug 2011 04:44:43 -0700 (PDT) From: "Alex V. Petrov" To: freebsd-multimedia@freebsd.org Date: Wed, 31 Aug 2011 19:44:37 +0800 User-Agent: KMail/1.13.7 (FreeBSD/9.0-BETA1; KDE/4.6.5; amd64; ; ) MIME-Version: 1.0 Content-Type: Text/Plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Message-Id: <201108311944.38078.alexvpetrov@gmail.com> Cc: hselasky@freebsd.org Subject: I have problem with libv4l X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 Aug 2011 12:13:43 -0000 Hi all! In June, after updating libv4l, my webcam (Mustek Gsmart mini 3) is not working (I use pwcview). $ pwcview Webcam set to: 320x240 (sif) at 5 fps Segmentation fault (core dumped) gdb: #0 0x0000000800ae1bfb in jpeg_idct_16x16 (cinfo=Variable "cinfo" is not available.) at jidctint.c:2760 2760 outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp0, [New Thread 803807400 (LWP 101450/pwcview)] Now did downgrade to libv4l-0.8.1 - camera works fine. FreeBSD alex.super 9.0-BETA1 FreeBSD 9.0-BETA1 #2: Sun Aug 28 20:01:09 KRAST 2011 alex@alex.super:/usr/obj/usr/src/sys/ALEX amd64 ----- Alex V. Petrov From owner-freebsd-multimedia@FreeBSD.ORG Wed Aug 31 12:54:06 2011 Return-Path: Delivered-To: multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 44BAF106564A for ; Wed, 31 Aug 2011 12:54:06 +0000 (UTC) (envelope-from kwm@rainbow-runner.nl) Received: from fep32.mx.upcmail.net (fep32.mx.upcmail.net [62.179.121.50]) by mx1.freebsd.org (Postfix) with ESMTP id 8CF728FC16 for ; Wed, 31 Aug 2011 12:54:05 +0000 (UTC) Received: from edge05.upcmail.net ([192.168.13.212]) by viefep16-int.chello.at (InterMail vM.8.01.02.02 201-2260-120-106-20100312) with ESMTP id <20110831123608.MDNW1962.viefep16-int.chello.at@edge05.upcmail.net>; Wed, 31 Aug 2011 14:36:08 +0200 Received: from [192.168.0.126] ([77.250.114.160]) by edge05.upcmail.net with edge id T0c71h0123TiT91050c8S6; Wed, 31 Aug 2011 14:36:08 +0200 X-SourceIP: 77.250.114.160 From: Koop Mast To: Mamoru Iwaki <1wkmmr@gmail.com> Date: Wed, 31 Aug 2011 14:35:44 +0200 In-Reply-To: <4E5DF07D.9000801@gmail.com> References: <4E5DF07D.9000801@gmail.com> Content-Type: text/plain; charset="us-ascii" X-Mailer: Evolution 3.0.2 FreeBSD GNOME Team Port Content-Transfer-Encoding: 7bit Message-ID: <1314794145.916.0.camel@crashalot.rainbow-runner.nl> Mime-Version: 1.0 X-Cloudmark-Analysis: v=1.1 cv=jqrf5qXv5urL2URZ3a9OklEvUdrM81ZtB3GWlHLPCVk= c=1 sm=0 a=yZGVJDiE--kA:10 a=kj9zAlcOel0A:10 a=6I5d2MoRAAAA:8 a=ebmHXgCWDyJUG9VELJAA:9 a=dqIJ9cnpCle7ZFy_lFUA:7 a=CjuIK1q_8ugA:10 a=SV7veod9ZcQA:10 a=HpAAvcLHHh0Zw7uRqdWCyQ==:117 Cc: multimedia@FreeBSD.org Subject: Re: ports/audio/libsamplerate fails package creation X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 Aug 2011 12:54:06 -0000 On Wed, 2011-08-31 at 17:27 +0900, Mamoru Iwaki wrote: > Hi, > > I'm trying to create a package of ports/audio/libsamplerate: > > # New ports collection makefile for: libsamplerate > # Date created: 2 February 2003 > # Whom: > # > # $FreeBSD: ports/audio/libsamplerate/Makefile,v 1.25 2011/08/31 > 00:40:56 sylvio Exp $ Can up update and try version 1.26 of the Makefile? This should be fixed with that. -Koop > but 'make package' fails as follows: > > test -z "/usr/local/lib/pkgconfig" || /usr/local/bin/gmkdir -p > "/usr/local/lib/pkgconfig" > /usr/bin/install -c -m 644 samplerate.pc '/usr/local/lib/pkgconfig' > install -o root -g wheel -m 444 > /mnt2/usr/ports/audio/libsamplerate/work/libsamplerate-0.1.8/doc/*.css > /usr/local/share/doc/libsamplerate > install -o root -g wheel -m 444 > /mnt2/usr/ports/audio/libsamplerate/work/libsamplerate-0.1.8/doc/*.html > /usr/local/share/doc/libsamplerate > install -o root -g wheel -m 444 > /mnt2/usr/ports/audio/libsamplerate/work/libsamplerate-0.1.8/doc/*.png > /usr/local/share/doc/libsamplerate > ===> Running ldconfig > /sbin/ldconfig -m /usr/local/lib > ===> Registering installation for libsamplerate-0.1.8 > ===> Building package for libsamplerate-0.1.8 > tar: libdata/pkgconfig/samplerate.pc: Cannot stat: No such file or directory > tar: Error exit delayed from previous errors. > pkg_create: make_dist: tar command failed with code 256 > *** Error code 1 > > Stop in /mnt2/usr/ports/audio/libsamplerate. > > > It looks that 'samplerate.pc' was installed into > /usr/local/lib/pkgconfig but tried to read from > (/usr/local/)libdata/pkgconfig/ > I'm not sure what location is intended to install the file. > > Please check the port. > > Cheers > --- > Mamoru Iwaki > Japan > _______________________________________________ > freebsd-multimedia@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia > To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@freebsd.org" From owner-freebsd-multimedia@FreeBSD.ORG Wed Aug 31 23:08:25 2011 Return-Path: Delivered-To: freebsd-multimedia@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id AFAC5106564A for ; Wed, 31 Aug 2011 23:08:25 +0000 (UTC) (envelope-from nox@jelal.kn-bremen.de) Received: from smtp.kn-bremen.de (gelbbaer.kn-bremen.de [78.46.108.116]) by mx1.freebsd.org (Postfix) with ESMTP id 6D5BB8FC14 for ; Wed, 31 Aug 2011 23:08:25 +0000 (UTC) Received: by smtp.kn-bremen.de (Postfix, from userid 10) id 537F11E00236; Thu, 1 Sep 2011 01:08:24 +0200 (CEST) Received: from triton8.kn-bremen.de (noident@localhost [127.0.0.1]) by triton8.kn-bremen.de (8.14.4/8.14.3) with ESMTP id p7VN1VUG062422 for ; Thu, 1 Sep 2011 01:01:31 +0200 (CEST) (envelope-from nox@triton8.kn-bremen.de) Received: (from nox@localhost) by triton8.kn-bremen.de (8.14.4/8.14.3/Submit) id p7VN1VDJ062421 for freebsd-multimedia@FreeBSD.org; Thu, 1 Sep 2011 01:01:31 +0200 (CEST) (envelope-from nox) From: Juergen Lock Date: Thu, 1 Sep 2011 01:01:31 +0200 To: freebsd-multimedia@FreeBSD.org Message-ID: <20110831230131.GA60999@triton8.kn-bremen.de> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.21 (2010-09-15) Cc: Subject: Using a midi keyboard with FreeBSD (jack update, ardour3 alpha...) X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 31 Aug 2011 23:08:25 -0000 Hi! So I was looking for midi software that could work with a midi keyboard on an usb midi interface (snd_uaudio, /dev/umidi0.0), and found that at least both rosegarden and musescore only know alsa seq interfaces (which we don't have nor emulate on FreeBSD), not raw midi (I'm not sure there's a difference between alsa raw midi and oss raw midi) I then found audio/lmms which appears to support oss midi, but couldn't get it to work with my interface (and also found it cannot export midi, only save in its own private fileformat.) I even tried to update lmms to the latest release (I'd need to clean that up before it would be ready for public consumption), but then... I found that the 3.0 alpha versions of Ardour... http://ardour.org/node/4532 http://ardour.org/a3_features http://ardour.org/a3_features_midi http://ardour.org/a3_features_midi_editing http://www.archive.org/details/Introduction_to_Ardour_3.0_MIDI ...have grown midi support, _and_ ardour uses jack for both midi output and input so I could use my keyboard with audio/jack_umidi. Well, so now I have a first preliminary port of 3.0alpha10 svn r10000: (same revision as the Linux binaries on their site) http://people.freebsd.org/~nox/tmp/ardour-3.0alpha10-preliminary.patch (apply on top of the current audio/ardour in the portstree) This needs a newer version of audio/jack so I updated that too: (please test this update even if you don't use ardour or midi) http://people.freebsd.org/~nox/tmp/jack-0.120.1.patch TODO: - Test (and possibly fix) the VST stuff (it uses wine and thus probably only works on i386 and I'm on amd64 so I didn't attempt to build it.) - Fix the port so it respects C{,XX}FLAGS? (it now uses waf which seems to ignore them.) - Add slv2 support and test it (would at least need updating audio/slv2 because ardour3 needs slv2 >= 0.6.4 .) - More missing features? - Add knob to build release version and/or strip the installed objects? (/usr/local/lib/ardour3 is currently 1.6G, the build dir work/ is 3.7G. It appears tho you can run the build from below the work/ dir without installing it by invoking: work/ardour-3.0alpha10_10000/gtk2_ardour/ardev ) - Test! (are the Ardour devs interested in FreeBSD bugreports? I don't know. :) What I do know is they don't want the alphas discussed in their webforums, qoute: -------snip----------- This is an alpha version of Ardour 3.0. You are respectfully requested NOT to ask for assistance with build issues and not to report issues with Ardour 3.0 on the forums at ardour.org. Please use IRC, the bug tracker and/or the ardour mailing lists (-dev or -user) Thanks for your co-operation with our development process. -------snip----------- Enjoy, :) Juergen PS: The export function in the gui doesn't work for midi tracks, but you can fork a track and after that grab a midi file out of: /interchange//midifiles From owner-freebsd-multimedia@FreeBSD.ORG Thu Sep 1 09:15:52 2011 Return-Path: Delivered-To: multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 7DC66106564A for ; Thu, 1 Sep 2011 09:15:52 +0000 (UTC) (envelope-from 1wkmmr@gmail.com) Received: from mail-iy0-f182.google.com (mail-iy0-f182.google.com [209.85.210.182]) by mx1.freebsd.org (Postfix) with ESMTP id 46D2D8FC13 for ; Thu, 1 Sep 2011 09:15:52 +0000 (UTC) Received: by iadx2 with SMTP id x2so2302252iad.13 for ; Thu, 01 Sep 2011 02:15:51 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=message-id:date:from:user-agent:mime-version:to:subject:references :in-reply-to:content-type:content-transfer-encoding; bh=KKBjvISVkUcSCZh6rv/qzbN29uHKz9GG8eQqvE9mywQ=; b=prQIMrZ5niGmy4jpCT4DWXY7Y/+wGPkk+SnPf8AYpXa6CmvLXL0NSjmOyA6ukK7yy5 +ov8lMh0ALsUe3/d8lyy5syg37iF0VhUP5T4m2kD1FOjePTmosSMhUrPc4YnqFfKc6jd TDopRyhdM3ZtIAZHRcHahX8MQmr8mxrDQB6gM= Received: by 10.231.63.136 with SMTP id b8mr2543797ibi.43.1314868551506; Thu, 01 Sep 2011 02:15:51 -0700 (PDT) Received: from [192.168.0.166] (tf-bsp02.eng.niigata-u.ac.jp [133.35.85.2]) by mx.google.com with ESMTPS id b5sm258770ibu.1.2011.09.01.02.15.49 (version=SSLv3 cipher=OTHER); Thu, 01 Sep 2011 02:15:50 -0700 (PDT) Message-ID: <4E5F4D3C.8000709@gmail.com> Date: Thu, 01 Sep 2011 18:15:40 +0900 From: Mamoru Iwaki <1wkmmr@gmail.com> User-Agent: Mozilla/5.0 (Windows NT 5.1; rv:6.0.1) Gecko/20110830 Thunderbird/6.0.1 MIME-Version: 1.0 To: Koop Mast , Christian Weisgerber , multimedia@FreeBSD.org References: <4E5DF07D.9000801@gmail.com> <1314794145.916.0.camel@crashalot.rainbow-runner.nl> In-Reply-To: <1314794145.916.0.camel@crashalot.rainbow-runner.nl> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: Subject: Re: ports/audio/libsamplerate fails package creation X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Sep 2011 09:15:52 -0000 Hi, Thank you for your help. Ver. 1.26 looks working good for me. (2011/08/31 21:35), Koop Mast wrote: > On Wed, 2011-08-31 at 17:27 +0900, Mamoru Iwaki wrote: >> Hi, >> >> I'm trying to create a package of ports/audio/libsamplerate: >> >> # New ports collection makefile for: libsamplerate >> # Date created: 2 February 2003 >> # Whom: >> # >> # $FreeBSD: ports/audio/libsamplerate/Makefile,v 1.25 2011/08/31 >> 00:40:56 sylvio Exp $ > > Can up update and try version 1.26 of the Makefile? This should be fixed > with that. > > -Koop (2011/08/31 19:41), Christian Weisgerber wrote: > In article<4E5DF07D.9000801@gmail.com> you write: > >> I'm trying to create a package of ports/audio/libsamplerate: >> # >> # $FreeBSD: ports/audio/libsamplerate/Makefile,v 1.25 2011/08/31 >> 00:40:56 sylvio Exp $ > > I just committed some comprehensive fixes. > --- Mamoru Iwaki Japan From owner-freebsd-multimedia@FreeBSD.ORG Thu Sep 1 18:26:48 2011 Return-Path: Delivered-To: freebsd-multimedia@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 94B6D1065670 for ; Thu, 1 Sep 2011 18:26:48 +0000 (UTC) (envelope-from nox@jelal.kn-bremen.de) Received: from smtp.kn-bremen.de (gelbbaer.kn-bremen.de [78.46.108.116]) by mx1.freebsd.org (Postfix) with ESMTP id 3097F8FC12 for ; Thu, 1 Sep 2011 18:26:48 +0000 (UTC) Received: by smtp.kn-bremen.de (Postfix, from userid 10) id E34271E00233; Thu, 1 Sep 2011 20:26:46 +0200 (CEST) Received: from triton8.kn-bremen.de (noident@localhost [127.0.0.1]) by triton8.kn-bremen.de (8.14.4/8.14.3) with ESMTP id p81I0hiE005503; Thu, 1 Sep 2011 20:00:43 +0200 (CEST) (envelope-from nox@triton8.kn-bremen.de) Received: (from nox@localhost) by triton8.kn-bremen.de (8.14.4/8.14.3/Submit) id p81I0hZU005502; Thu, 1 Sep 2011 20:00:43 +0200 (CEST) (envelope-from nox) From: Juergen Lock Date: Thu, 1 Sep 2011 20:00:43 +0200 To: Juergen Lock Message-ID: <20110901180043.GA5319@triton8.kn-bremen.de> References: <20110831230131.GA60999@triton8.kn-bremen.de> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20110831230131.GA60999@triton8.kn-bremen.de> User-Agent: Mutt/1.5.21 (2010-09-15) Cc: freebsd-multimedia@FreeBSD.org Subject: Re: Using a midi keyboard with FreeBSD (jack update, ardour3 alpha...) X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 01 Sep 2011 18:26:48 -0000 Small update: On Thu, Sep 01, 2011 at 01:01:31AM +0200, Juergen Lock wrote: > Hi! > > So I was looking for midi software that could work with a midi > keyboard on an usb midi interface (snd_uaudio, /dev/umidi0.0), and > found that at least both rosegarden and musescore only know alsa seq > interfaces (which we don't have nor emulate on FreeBSD), not raw > midi (I'm not sure there's a difference between alsa raw midi and > oss raw midi) I then found audio/lmms which appears to support > oss midi, but couldn't get it to work with my interface (and also > found it cannot export midi, only save in its own private fileformat.) > I even tried to update lmms to the latest release (I'd need to clean > that up before it would be ready for public consumption), but then... > > I found that the 3.0 alpha versions of Ardour... > > http://ardour.org/node/4532 > http://ardour.org/a3_features > http://ardour.org/a3_features_midi > http://ardour.org/a3_features_midi_editing > http://www.archive.org/details/Introduction_to_Ardour_3.0_MIDI > > ...have grown midi support, _and_ ardour uses jack for both midi > output and input so I could use my keyboard with audio/jack_umidi. > Well, so now I have a first preliminary port of 3.0alpha10 svn > r10000: (same revision as the Linux binaries on their site) > > http://people.freebsd.org/~nox/tmp/ardour-3.0alpha10-preliminary.patch > > (apply on top of the current audio/ardour in the portstree) > > This needs a newer version of audio/jack so I updated that too: > (please test this update even if you don't use ardour or midi) > > http://people.freebsd.org/~nox/tmp/jack-0.120.1.patch > > TODO: > > - Test (and possibly fix) the VST stuff (it uses wine and thus probably > only works on i386 and I'm on amd64 so I didn't attempt to build it.) > - Fix the port so it respects C{,XX}FLAGS? (it now uses waf which > seems to ignore them.) > - Add slv2 support and test it (would at least need updating audio/slv2 > because ardour3 needs slv2 >= 0.6.4 .) audio/slv2 was updated yesterday so I added the dependencies and verified the port still passes tb: http://people.freebsd.org/~nox/tmp/ardour-3.0alpha10-preliminary2.patch I don't have any lv2 plugins tho so I can't test this... > - More missing features? > - Add knob to build release version and/or strip the installed > objects? (/usr/local/lib/ardour3 is currently 1.6G, the build > dir work/ is 3.7G. It appears tho you can run the build from > below the work/ dir without installing it by invoking: > > work/ardour-3.0alpha10_10000/gtk2_ardour/ardev > > ) > - Test! (are the Ardour devs interested in FreeBSD bugreports? > I don't know. :) What I do know is they don't want the alphas > discussed in their webforums, qoute: > > -------snip----------- > This is an alpha version of Ardour 3.0. > > You are respectfully requested NOT to ask for assistance with build issues > and not to report issues with Ardour 3.0 on the forums at ardour.org. > > Please use IRC, the bug tracker and/or the ardour mailing lists (-dev or -user) > > Thanks for your co-operation with our development process. > -------snip----------- > > Enjoy, :) > Juergen > > PS: The export function in the gui doesn't work for midi tracks, but > you can fork a track and after that grab a midi file out of: > > /interchange//midifiles From owner-freebsd-multimedia@FreeBSD.ORG Fri Sep 2 19:40:51 2011 Return-Path: Delivered-To: freebsd-multimedia@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 27057106566C; Fri, 2 Sep 2011 19:40:51 +0000 (UTC) (envelope-from nox@jelal.kn-bremen.de) Received: from smtp.kn-bremen.de (gelbbaer.kn-bremen.de [78.46.108.116]) by mx1.freebsd.org (Postfix) with ESMTP id 8E6FE8FC08; Fri, 2 Sep 2011 19:40:50 +0000 (UTC) Received: by smtp.kn-bremen.de (Postfix, from userid 10) id 4977B1E0023E; Fri, 2 Sep 2011 21:40:49 +0200 (CEST) Received: from triton8.kn-bremen.de (noident@localhost [127.0.0.1]) by triton8.kn-bremen.de (8.14.4/8.14.3) with ESMTP id p82JdJS0026451; Fri, 2 Sep 2011 21:39:19 +0200 (CEST) (envelope-from nox@triton8.kn-bremen.de) Received: (from nox@localhost) by triton8.kn-bremen.de (8.14.4/8.14.3/Submit) id p82JdJji026450; Fri, 2 Sep 2011 21:39:19 +0200 (CEST) (envelope-from nox) From: Juergen Lock Date: Fri, 2 Sep 2011 21:39:19 +0200 To: Juergen Lock Message-ID: <20110902193919.GA26281@triton8.kn-bremen.de> References: <20110831230131.GA60999@triton8.kn-bremen.de> <20110901180043.GA5319@triton8.kn-bremen.de> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20110901180043.GA5319@triton8.kn-bremen.de> User-Agent: Mutt/1.5.21 (2010-09-15) Cc: freebsd-multimedia@FreeBSD.org, danfe@FreeBSD.org, hselasky@FreeBSD.org Subject: Re: Using a midi keyboard with FreeBSD (jack update, ardour3 alpha...) X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Sep 2011 19:40:51 -0000 I did another update: http://people.freebsd.org/~nox/tmp/ardour-3.0alpha10-preliminary3.patch (mostly Makefiles cleanups, I also added a DEBUG knob that can be turned off if e.g. you are low on diskspace, and I removed the SoundTouch dependency since I was told it is no longer used.) Enjoy, :) Juergen On Thu, Sep 01, 2011 at 08:00:43PM +0200, Juergen Lock wrote: > Small update: > > On Thu, Sep 01, 2011 at 01:01:31AM +0200, Juergen Lock wrote: > > Hi! > > > > So I was looking for midi software that could work with a midi > > keyboard on an usb midi interface (snd_uaudio, /dev/umidi0.0), and > > found that at least both rosegarden and musescore only know alsa seq > > interfaces (which we don't have nor emulate on FreeBSD), not raw > > midi (I'm not sure there's a difference between alsa raw midi and > > oss raw midi) I then found audio/lmms which appears to support > > oss midi, but couldn't get it to work with my interface (and also > > found it cannot export midi, only save in its own private fileformat.) > > I even tried to update lmms to the latest release (I'd need to clean > > that up before it would be ready for public consumption), but then... > > > > I found that the 3.0 alpha versions of Ardour... > > > > http://ardour.org/node/4532 > > http://ardour.org/a3_features > > http://ardour.org/a3_features_midi > > http://ardour.org/a3_features_midi_editing > > http://www.archive.org/details/Introduction_to_Ardour_3.0_MIDI > > > > ...have grown midi support, _and_ ardour uses jack for both midi > > output and input so I could use my keyboard with audio/jack_umidi. > > Well, so now I have a first preliminary port of 3.0alpha10 svn > > r10000: (same revision as the Linux binaries on their site) > > > > http://people.freebsd.org/~nox/tmp/ardour-3.0alpha10-preliminary.patch > > > > (apply on top of the current audio/ardour in the portstree) > > > > This needs a newer version of audio/jack so I updated that too: > > (please test this update even if you don't use ardour or midi) > > > > http://people.freebsd.org/~nox/tmp/jack-0.120.1.patch > > > > TODO: > > > > - Test (and possibly fix) the VST stuff (it uses wine and thus probably > > only works on i386 and I'm on amd64 so I didn't attempt to build it.) > > - Fix the port so it respects C{,XX}FLAGS? (it now uses waf which > > seems to ignore them.) > > - Add slv2 support and test it (would at least need updating audio/slv2 > > because ardour3 needs slv2 >= 0.6.4 .) > > audio/slv2 was updated yesterday so I added the dependencies and > verified the port still passes tb: > > http://people.freebsd.org/~nox/tmp/ardour-3.0alpha10-preliminary2.patch > > I don't have any lv2 plugins tho so I can't test this... > > > - More missing features? > > - Add knob to build release version and/or strip the installed > > objects? (/usr/local/lib/ardour3 is currently 1.6G, the build > > dir work/ is 3.7G. It appears tho you can run the build from > > below the work/ dir without installing it by invoking: > > > > work/ardour-3.0alpha10_10000/gtk2_ardour/ardev > > > > ) > > - Test! (are the Ardour devs interested in FreeBSD bugreports? > > I don't know. :) What I do know is they don't want the alphas > > discussed in their webforums, qoute: > > > > -------snip----------- > > This is an alpha version of Ardour 3.0. > > > > You are respectfully requested NOT to ask for assistance with build issues > > and not to report issues with Ardour 3.0 on the forums at ardour.org. > > > > Please use IRC, the bug tracker and/or the ardour mailing lists (-dev or -user) > > > > Thanks for your co-operation with our development process. > > -------snip----------- > > > > Enjoy, :) > > Juergen > > > > PS: The export function in the gui doesn't work for midi tracks, but > > you can fork a track and after that grab a midi file out of: > > > > /interchange//midifiles From owner-freebsd-multimedia@FreeBSD.ORG Sat Sep 3 13:20:55 2011 Return-Path: Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 1AD1F1065689 for ; Sat, 3 Sep 2011 13:20:55 +0000 (UTC) (envelope-from guru@unixarea.de) Received: from ms16-1.1blu.de (ms16-1.1blu.de [89.202.0.34]) by mx1.freebsd.org (Postfix) with ESMTP id D19888FC16 for ; Sat, 3 Sep 2011 13:20:54 +0000 (UTC) Received: from [93.104.95.202] (helo=localhost.my.domain) by ms16-1.1blu.de with esmtpsa (TLS-1.0:DHE_RSA_AES_256_CBC_SHA1:32) (Exim 4.69) (envelope-from ) id 1QzjL9-0000Oh-IY; Sat, 03 Sep 2011 08:04:27 +0200 Received: from localhost.my.domain (localhost [127.0.0.1]) by localhost.my.domain (8.14.4/8.14.3) with ESMTP id p8364Pvc002378; Sat, 3 Sep 2011 08:04:25 +0200 (CEST) (envelope-from guru@unixarea.de) Received: (from guru@localhost) by localhost.my.domain (8.14.4/8.14.3/Submit) id p8364PlZ002377; Sat, 3 Sep 2011 08:04:25 +0200 (CEST) (envelope-from guru@unixarea.de) X-Authentication-Warning: localhost.my.domain: guru set sender to guru@unixarea.de using -f Date: Sat, 3 Sep 2011 08:04:24 +0200 From: Matthias Apitz To: freebsd-multimedia@freebsd.org Message-ID: <20110903060424.GA2352@tinyCurrent> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline X-Operating-System: FreeBSD 8.0-CURRENT (i386) User-Agent: Mutt/1.5.21 (2010-09-15) X-Con-Id: 51246 X-Originating-IP: 93.104.95.202 Subject: falshplayer10 && /tmp file system full X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Matthias Apitz List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 03 Sep 2011 13:20:55 -0000 Hi, Yesterday evening my wife complaint that she was unable to watch her favored movies in YouTube within KDE's konqueror and flash10. Both we run the same 9-CURRENT in our laptops and mine was working, in her the flash only showed the moving circle but no picture. After some time of checking I came to the idea to fire up konqueror from a xterm window to see perhaps some messages, and yes, it just said repeating: /tmp file system full... There are a lot of file /tmp/FlashXX* with tons of Megatbytes, and one can even re-play them with mplayer, they are of type: $ file /tmp/FlashXX4g7qKo /tmp/FlashXX4g7qKo: Macromedia Flash Video after removin them all was fine again; Questions: - Why they are there left over? - Why is konqueror (or flash) hyding the fact of FS full and not just popping up some error box to let 'normal' users get to the problem? Thanks matthias -- Matthias Apitz t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211 e - w http://www.unixarea.de/