From owner-freebsd-acpi@FreeBSD.ORG Mon Sep 8 10:41:47 2014 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id C36B47BB for ; Mon, 8 Sep 2014 10:41:47 +0000 (UTC) Received: from mail-yk0-x22f.google.com (mail-yk0-x22f.google.com [IPv6:2607:f8b0:4002:c07::22f]) (using TLSv1 with cipher ECDHE-RSA-RC4-SHA (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 595BB18EA for ; Mon, 8 Sep 2014 10:41:47 +0000 (UTC) Received: by mail-yk0-f175.google.com with SMTP id 142so241605ykq.20 for ; Mon, 08 Sep 2014 03:41:46 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :content-type; bh=c/5e+DkrPN3I9+YuEp3KjTgaq+abwjDfSYmjugO/B+g=; b=T6CmxGcSMul3t45PG4coeM0YeOD3PmJkCfJYntOmH4La757Ey4+2lBhTV8OMqLZoMU LwIUSHQhAV/4YaiWHFWYy0w52M10OuH4OntTUsonnosPcEpN4BnnxzPA3DQPSbJH2gGy mESgE6XlOq0kI0izri8iP1BS1/Oe2xtb49EkSi5Ooi6P4yWUHUwz83X1GPILw5ITLOkl e/GyhXUbTypMmH6Ebf66N8PT0ZYHwkwESmPHmDLx89o477jm47MA7CH0Reohdgnwsz2X Y7Ata8phVx+uPsGM2ZqgtCNNpyIeIlZePa/vFkTya9vbudTl4fVI/M/3vHIcMvz54cx1 40MQ== MIME-Version: 1.0 X-Received: by 10.236.171.232 with SMTP id r68mr4200638yhl.99.1410172906139; Mon, 08 Sep 2014 03:41:46 -0700 (PDT) Received: by 10.170.132.197 with HTTP; Mon, 8 Sep 2014 03:41:46 -0700 (PDT) In-Reply-To: References: Date: Mon, 8 Sep 2014 14:41:46 +0400 Message-ID: Subject: Re: freebsd-acpi Digest, Vol 456, Issue 2 From: nick gigashvili To: freebsd-acpi@freebsd.org Content-Type: text/plain; charset=UTF-8 X-Content-Filtered-By: Mailman/MimeDel 2.1.18-1 X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.18-1 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 08 Sep 2014 10:41:47 -0000 Thanks Ian for response Ill do as you suggested... what about ASL syntax error shouldn't I pay attantion to it ? On Sat, Sep 6, 2014 at 4:00 PM, wrote: > Send freebsd-acpi mailing list submissions to > freebsd-acpi@freebsd.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.freebsd.org/mailman/listinfo/freebsd-acpi > or, via email, send a message with subject or body 'help' to > freebsd-acpi-request@freebsd.org > > You can reach the person managing the list at > freebsd-acpi-owner@freebsd.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of freebsd-acpi digest..." > > > Today's Topics: > > 1. Problems with acpi (battery status not shown) (nick gigashvili) > 2. Re: Problems with acpi (battery status not shown) (Ian Smith) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 5 Sep 2014 18:43:23 +0400 > From: nick gigashvili > To: freebsd-acpi@freebsd.org > Subject: Problems with acpi (battery status not shown) > Message-ID: > w@mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Hi > > I'm having problem with acpi battery status is not updated it is freezed on > 96% when on AC power, I'm running FreeBSD 10-RELEASE on HP Workstation > 8570w. > I tested ASL with iasl and it has syntax error. I coultn't boot with acpi > turned off so Im sending you dmesg output only with acpi enabled. > > here is ASL file link: > https://www.sendspace.com/file/do5xn7 > > Thank you > -------------- next part -------------- > Table 'FACP' at 0xbeffc000 > Table 'HPET' at 0xbeffb000 > Table 'APIC' at 0xbeffa000 > APIC: Found table at 0xbeffa000 > APIC: Using the MADT enumerator. > MADT: Found CPU APIC ID 0 ACPI ID 0: enabled > SMP: Added CPU 0 (AP) > MADT: Found CPU APIC ID 1 ACPI ID 1: enabled > SMP: Added CPU 1 (AP) > MADT: Found CPU APIC ID 2 ACPI ID 2: enabled > SMP: Added CPU 2 (AP) > MADT: Found CPU APIC ID 3 ACPI ID 3: enabled > SMP: Added CPU 3 (AP) > MADT: Found CPU APIC ID 4 ACPI ID 4: enabled > SMP: Added CPU 4 (AP) > MADT: Found CPU APIC ID 5 ACPI ID 5: enabled > SMP: Added CPU 5 (AP) > MADT: Found CPU APIC ID 6 ACPI ID 6: enabled > SMP: Added CPU 6 (AP) > MADT: Found CPU APIC ID 7 ACPI ID 7: enabled > SMP: Added CPU 7 (AP) > Copyright (c) 1992-2014 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 10.0-RELEASE-p7 #0: Tue Jul 8 06:37:44 UTC 2014 > root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 > FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610 > Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff817f2000. > Calibrating TSC clock ... TSC clock: 2394611688 Hz > CPU: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (2394.61-MHz K8-class CPU) > Origin = "GenuineIntel" Id = 0x306a9 Family = 0x6 Model = 0x3a > Stepping = 9 > > Features=0xbfebfbff > > Features2=0x7fbae3bf > AMD Features=0x28100800 > AMD Features2=0x1 > Standard Extended Features=0x281 > TSC: P-state invariant, performance statistics > real memory = 8589934592 (8192 MB) > Physical memory chunk(s): > 0x0000000000010000 - 0x0000000000099fff, 565248 bytes (138 pages) > 0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages) > 0x000000000181f000 - 0x00000000bd8fefff, 3155034112 bytes (770272 pages) > 0x00000000bec7f000 - 0x00000000bef71fff, 3092480 bytes (755 pages) > 0x00000000befff000 - 0x00000000beffffff, 4096 bytes (1 pages) > 0x0000000100000000 - 0x000000022f5e8fff, 5089693696 bytes (1242601 pages) > avail memory = 8195903488 (7816 MB) > Event timer "LAPIC" quality 600 > ACPI APIC Table: > INTR: Adding local APIC 1 as a target > INTR: Adding local APIC 2 as a target > INTR: Adding local APIC 3 as a target > INTR: Adding local APIC 4 as a target > INTR: Adding local APIC 5 as a target > INTR: Adding local APIC 6 as a target > INTR: Adding local APIC 7 as a target > FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs > FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > cpu2 (AP): APIC ID: 2 > cpu3 (AP): APIC ID: 3 > cpu4 (AP): APIC ID: 4 > cpu5 (AP): APIC ID: 5 > cpu6 (AP): APIC ID: 6 > cpu7 (AP): APIC ID: 7 > APIC: CPU 0 has ACPI ID 0 > APIC: CPU 1 has ACPI ID 1 > APIC: CPU 2 has ACPI ID 2 > APIC: CPU 3 has ACPI ID 3 > APIC: CPU 4 has ACPI ID 4 > APIC: CPU 5 has ACPI ID 5 > APIC: CPU 6 has ACPI ID 6 > APIC: CPU 7 has ACPI ID 7 > lapic0: CMCI unmasked > x86bios: IVT 0x000000-0x0004ff at 0xfffff80000000000 > x86bios: SSEG 0x098000-0x098fff at 0xfffffe01ebf9f000 > x86bios: EBDA 0x09d000-0x09ffff at 0xfffff8000009d000 > x86bios: ROM 0x0a0000-0x0fefff at 0xfffff800000a0000 > XEN: CPU 0 has VCPU ID 0 > XEN: CPU 1 has VCPU ID 1 > XEN: CPU 2 has VCPU ID 2 > XEN: CPU 3 has VCPU ID 3 > XEN: CPU 4 has VCPU ID 4 > XEN: CPU 5 has VCPU ID 5 > XEN: CPU 6 has VCPU ID 6 > XEN: CPU 7 has VCPU ID 7 > ULE: setup cpu 0 > ULE: setup cpu 1 > ULE: setup cpu 2 > ULE: setup cpu 3 > ULE: setup cpu 4 > ULE: setup cpu 5 > ULE: setup cpu 6 > ULE: setup cpu 7 > ACPI: RSDP 0xf2f10 00024 (v02 HPQOEM) > ACPI: XSDT 0xbeffe120 00094 (v01 HPQOEM SLIC-MPC 0000000F 01000013) > ACPI: FACP 0xbeffc000 0010C (v05 HPQOEM 176B 0000000F HP 00000001) > ACPI: DSDT 0xbefd6000 20720 (v02 HPQOEM 176B 00000001 INTL 20110112) > ACPI: FACS 0xbec34000 00040 > ACPI: HPET 0xbeffb000 00038 (v01 HPQOEM 176B 00000001 HP 00000001) > ACPI: APIC 0xbeffa000 000BC (v01 HPQOEM 176B 00000001 HP 00000001) > ACPI: MCFG 0xbeff9000 0003C (v01 HPQOEM 176B 00000001 HP 00000001) > ACPI: TCPA 0xbeff7000 00032 (v02 HPQOEM 176B 00000000 HP 00000001) > ACPI: SSDT 0xbefd3000 002CA (v01 HPQOEM SataAhci 00001000 INTL 20110112) > ACPI: SSDT 0xbefd2000 0048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112) > ACPI: SLIC 0xbefd1000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) > ACPI: FPDT 0xbefcf000 00044 (v01 HPQOEM 176B 00000001 HP 00000001) > ACPI: BGRT 0xbefce000 00038 (v00 HPQOEM 176B 00000001 HP 00000001) > ACPI: SSDT 0xbefcd000 00E42 (v01 HPQOEM ATIGFX 00000001 INTL 20110112) > ACPI: SSDT 0xbefca000 00932 (v01 PmRef Cpu0Ist 00003000 INTL 20110112) > ACPI: SSDT 0xbefc9000 00AAD (v01 PmRef CpuPm 00003000 INTL 20110112) > ACPI: ASF! 0xbeff8000 000A5 (v32 HPQOEM 176B 00000001 HP 00000001) > MADT: Found IO APIC ID 0, Interrupt 0 at 0xfec00000 > ioapic0: Routing external 8259A's -> intpin 0 > MADT: Interrupt override: source 0, irq 2 > ioapic0: Routing IRQ 0 -> intpin 2 > MADT: Interrupt override: source 9, irq 9 > ioapic0: intpin 9 trigger: level > lapic0: Routing NMI -> LINT1 > lapic0: LINT1 trigger: edge > lapic0: LINT1 polarity: high > lapic1: Routing NMI -> LINT1 > lapic1: LINT1 trigger: edge > lapic1: LINT1 polarity: high > lapic2: Routing NMI -> LINT1 > lapic2: LINT1 trigger: edge > lapic2: LINT1 polarity: high > lapic3: Routing NMI -> LINT1 > lapic3: LINT1 trigger: edge > lapic3: LINT1 polarity: high > lapic4: Routing NMI -> LINT1 > lapic4: LINT1 trigger: edge > lapic4: LINT1 polarity: high > lapic5: Routing NMI -> LINT1 > lapic5: LINT1 trigger: edge > lapic5: LINT1 polarity: high > lapic6: Routing NMI -> LINT1 > lapic6: LINT1 trigger: edge > lapic6: LINT1 polarity: high > lapic7: Routing NMI -> LINT1 > lapic7: LINT1 trigger: edge > lapic7: LINT1 polarity: high > ioapic0 irqs 0-23 on motherboard > cpu0 BSP: > ID: 0x00000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 > cmci: 0x000000f2 > wlan: <802.11 Link Layer> > snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] > feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 > feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 > Hardware, VIA Nehemiah Padlock RNG: VIA Padlock RNG not present > kbd: new array size 4 > kbd1 at kbdmux0 > mem: > null: > nfslock: pseudo-device > Falling back to random adaptor > random: initialized > VESA: INT 0x10 vector 0xc000:0x039e > VESA: information block > 0000 56 45 53 41 00 03 44 02 00 c0 01 00 00 00 44 00 > 0010 00 99 00 01 18 0f 59 01 00 c0 e4 00 00 c0 e0 56 > 0020 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 0030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 0040 00 00 00 00 00 01 01 01 03 01 05 01 07 01 10 01 > 0050 11 01 13 01 14 01 16 01 17 01 19 01 1a 01 0d 01 > 0060 0e 01 20 01 93 01 95 01 96 01 b3 01 b5 01 b6 01 > 0070 c3 01 c5 01 c6 01 33 01 35 01 36 01 53 01 55 01 > 0080 56 01 63 01 65 01 66 01 21 01 22 01 23 01 24 01 > 0090 43 01 45 01 46 01 73 01 75 01 76 01 83 01 85 01 > 00a0 86 01 d3 01 d5 01 d6 01 e3 01 e5 01 e6 01 d1 01 > 00b0 d2 01 d4 01 ff ff 00 00 00 00 00 00 00 00 00 00 > 00c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 0100 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 0110 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 0120 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 0130 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 > 0140 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 0150 00 00 00 00 80 81 01 00 00 00 00 00 00 00 00 00 > 0160 00 00 00 00 a8 06 00 00 00 00 00 00 08 00 00 00 > 0170 00 00 00 00 cc 5b 09 54 00 00 00 00 e1 ef 02 54 > 0180 00 00 00 00 e1 ef 02 54 00 00 00 00 e1 ef 02 54 > 0190 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 01a0 00 00 00 00 20 e0 c6 7a 00 00 00 00 00 00 00 00 > 01b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 01c0 00 00 00 00 46 6f 38 00 00 00 00 00 00 00 00 00 > 01d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 01e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 01f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > VESA: 56 mode(s) found > VESA: v3.0, 16384k memory, flags:0x1, mode table:0xfffffe01ebfff044 > (99000044) > VESA: AMD ATOMBIOS > VESA: (C) 1988-2010, Advanced Micro Devices, Inc. FGL CHELSEA 01.00 > io: > VMBUS: load > hptnr: R750/DC7280 controller driver v1.0 > hpt27xx: RocketRAID 27xx controller driver v1.1 > hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 > acpi0: on motherboard > ACPI: All ACPI Tables successfully acquired > PCIe: Memory Mapped configuration base @ 0xe0000000 > ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 > acpi0: Power Button (fixed) > cpu0: Processor \134_PR_.CPU0 (ACPI ID 0) -> APIC ID 0 > cpu0: on acpi0 > ACPI: SSDT 0xbec32018 00861 (v01 PmRef Cpu0Cst 00003001 INTL 20110112) > ACPI: Dynamic OEM Table Load: > ACPI: SSDT 0 00861 (v01 PmRef Cpu0Cst 00003001 INTL 20110112) > cpu1: Processor \134_PR_.CPU1 (ACPI ID 1) -> APIC ID 1 > cpu1: on acpi0 > ACPI: SSDT 0xbec33a98 00303 (v01 PmRef ApIst 00003000 INTL 20110112) > ACPI: Dynamic OEM Table Load: > ACPI: SSDT 0 00303 (v01 PmRef ApIst 00003000 INTL 20110112) > ACPI: SSDT 0xbec31d98 00119 (v01 PmRef ApCst 00003000 INTL 20110112) > ACPI: Dynamic OEM Table Load: > ACPI: SSDT 0 00119 (v01 PmRef ApCst 00003000 INTL 20110112) > cpu2: Processor \134_PR_.CPU2 (ACPI ID 2) -> APIC ID 2 > cpu2: on acpi0 > cpu3: Processor \134_PR_.CPU3 (ACPI ID 3) -> APIC ID 3 > cpu3: on acpi0 > cpu4: Processor \134_PR_.CPU4 (ACPI ID 4) -> APIC ID 4 > cpu4: on acpi0 > cpu5: Processor \134_PR_.CPU5 (ACPI ID 5) -> APIC ID 5 > cpu5: on acpi0 > cpu6: Processor \134_PR_.CPU6 (ACPI ID 6) -> APIC ID 6 > cpu6: on acpi0 > cpu7: Processor \134_PR_.CPU7 (ACPI ID 7) -> APIC ID 7 > cpu7: on acpi0 > hpet0: iomem 0xfed00000-0xfed003ff on acpi0 > hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 8 timers, legacy route > hpet0: t0: irqs 0x00f00000 (0), MSI, 64bit, periodic > hpet0: t1: irqs 0x00f00000 (0), MSI > hpet0: t2: irqs 0x00f00800 (0), MSI > hpet0: t3: irqs 0x00f01000 (0), MSI > hpet0: t4: irqs 0x00000000 (0), MSI > hpet0: t5: irqs 0x00000000 (0), MSI > hpet0: t6: irqs 0x00000000 (0), MSI > hpet0: t7: irqs 0x00000000 (0), MSI > Timecounter "HPET" frequency 14318180 Hz quality 950 > msi: routing MSI-X IRQ 256 to local APIC 0 vector 49 > msi: routing MSI-X IRQ 257 to local APIC 0 vector 50 > msi: routing MSI-X IRQ 258 to local APIC 0 vector 51 > msi: routing MSI-X IRQ 259 to local APIC 0 vector 52 > msi: routing MSI-X IRQ 260 to local APIC 0 vector 53 > msi: routing MSI-X IRQ 261 to local APIC 0 vector 54 > msi: routing MSI-X IRQ 262 to local APIC 0 vector 55 > msi: routing MSI-X IRQ 263 to local APIC 0 vector 56 > Event timer "HPET" frequency 14318180 Hz quality 550 > atrtc0: port 0x70-0x77 irq 8 on acpi0 > atrtc0: Warning: Couldn't map I/O. > atrtc0: registered as a time-of-day clock (resolution 1000000us, > adjustment 0.500000000s) > ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 57 > Event timer "RTC" frequency 32768 Hz quality 0 > attimer0: port 0x40-0x43,0x50-0x53 irq 0 on acpi0 > Timecounter "i8254" frequency 1193182 Hz quality 0 > ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 58 > Event timer "i8254" frequency 1193182 Hz quality 100 > ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 > acpi_ec0: port 0x62,0x66 on acpi0 > pci_link0: Index IRQ Rtd Ref IRQs > Initial Probe 0 10 N 0 3 4 5 6 10 11 12 14 15 > Validation 0 10 N 0 3 4 5 6 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 > pci_link1: Index IRQ Rtd Ref IRQs > Initial Probe 0 5 N 0 3 4 5 6 10 11 12 14 15 > Validation 0 5 N 0 3 4 5 6 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 > pci_link2: Index IRQ Rtd Ref IRQs > Initial Probe 0 10 N 0 3 4 5 6 10 11 12 14 15 > Validation 0 10 N 0 3 4 5 6 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 > pci_link3: Index IRQ Rtd Ref IRQs > Initial Probe 0 10 N 0 3 4 5 6 10 11 12 14 15 > Validation 0 10 N 0 3 4 5 6 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 > pci_link4: Index IRQ Rtd Ref IRQs > Initial Probe 0 11 N 0 3 4 5 6 10 11 12 14 15 > Validation 0 11 N 0 3 4 5 6 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 > pci_link5: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 6 10 11 12 14 15 > Validation 0 255 N 0 3 4 5 6 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 > pci_link6: Index IRQ Rtd Ref IRQs > Initial Probe 0 10 N 0 3 4 5 6 10 11 12 14 15 > Validation 0 10 N 0 3 4 5 6 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 > pci_link7: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 6 10 11 12 14 15 > Validation 0 255 N 0 3 4 5 6 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 > pcib0: port 0xcf8-0xcff on acpi0 > pcib0: decoding 4 range 0-0xcf7 > pcib0: decoding 4 range 0xd00-0xffff > pcib0: decoding 3 range 0xa0000-0xbffff > pcib0: decoding 3 range 0xc0000000-0xdfffffff > pcib0: decoding 3 range 0xf0000000-0xfedfffff > pcib0: decoding 3 range 0xfee01000-0xffffffff > pci0: on pcib0 > pci0: domain=0, physical bus=0 > found-> vendor=0x8086, dev=0x0154, revid=0x09 > domain=0, bus=0, slot=0, func=0 > class=06-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x8086, dev=0x0151, revid=0x09 > domain=0, bus=0, slot=1, func=0 > class=06-04-00, hdrtype=0x01, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message > pcib0: matched entry for 0.1.INTA > pcib0: slot 1 INTA hardwired to IRQ 16 > found-> vendor=0x8086, dev=0x1e31, revid=0x04 > domain=0, bus=0, slot=20, func=0 > class=0c-03-30, hdrtype=0x00, mfdev=0 > cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 2 supports D0 D3 current D0 > MSI supports 8 messages, 64 bit > map[10]: type Memory, range 64, base 0xd4420000, size 16, memory > disabled > pcib0: allocated type 3 (0xd4420000-0xd442ffff) for rid 10 of pci0:0:20:0 > pcib0: no PRT entry for 0.20.INTA > found-> vendor=0x8086, dev=0x1e3a, revid=0x04 > domain=0, bus=0, slot=22, func=0 > class=07-80-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message, 64 bit > map[10]: type Memory, range 64, base 0xd4435000, size 4, enabled > pcib0: allocated type 3 (0xd4435000-0xd443500f) for rid 10 of pci0:0:22:0 > pcib0: matched entry for 0.22.INTA > pcib0: slot 22 INTA hardwired to IRQ 16 > found-> vendor=0x8086, dev=0x1502, revid=0x04 > domain=0, bus=0, slot=25, func=0 > class=02-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=5 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message, 64 bit > map[10]: type Memory, range 32, base 0xd4400000, size 17, enabled > pcib0: allocated type 3 (0xd4400000-0xd441ffff) for rid 10 of pci0:0:25:0 > map[14]: type Memory, range 32, base 0xd443b000, size 12, enabled > pcib0: allocated type 3 (0xd443b000-0xd443bfff) for rid 14 of pci0:0:25:0 > map[18]: type I/O Port, range 32, base 0x5040, size 5, enabled > pcib0: allocated type 4 (0x5040-0x505f) for rid 18 of pci0:0:25:0 > pcib0: matched entry for 0.25.INTA > pcib0: slot 25 INTA hardwired to IRQ 17 > found-> vendor=0x8086, dev=0x1e2d, revid=0x04 > domain=0, bus=0, slot=26, func=0 > class=0c-03-20, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 2 supports D0 D3 current D0 > map[10]: type Memory, range 32, base 0xd443a000, size 10, enabled > pcib0: allocated type 3 (0xd443a000-0xd443a3ff) for rid 10 of pci0:0:26:0 > pcib0: matched entry for 0.26.INTA > pcib0: slot 26 INTA hardwired to IRQ 16 > found-> vendor=0x8086, dev=0x1e20, revid=0x04 > domain=0, bus=0, slot=27, func=0 > class=04-03-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message, 64 bit > map[10]: type Memory, range 64, base 0xd4430000, size 14, enabled > pcib0: allocated type 3 (0xd4430000-0xd4433fff) for rid 10 of pci0:0:27:0 > pcib0: matched entry for 0.27.INTA > pcib0: slot 27 INTA hardwired to IRQ 22 > found-> vendor=0x8086, dev=0x1e10, revid=0xc4 > domain=0, bus=0, slot=28, func=0 > class=06-04-00, hdrtype=0x01, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=5 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message > pcib0: matched entry for 0.28.INTA > pcib0: slot 28 INTA hardwired to IRQ 17 > found-> vendor=0x8086, dev=0x1e12, revid=0xc4 > domain=0, bus=0, slot=28, func=1 > class=06-04-00, hdrtype=0x01, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=b, irq=10 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message > pcib0: matched entry for 0.28.INTB > pcib0: slot 28 INTB hardwired to IRQ 16 > found-> vendor=0x8086, dev=0x1e14, revid=0xc4 > domain=0, bus=0, slot=28, func=2 > class=06-04-00, hdrtype=0x01, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=c, irq=10 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message > pcib0: matched entry for 0.28.INTC > pcib0: slot 28 INTC hardwired to IRQ 18 > found-> vendor=0x8086, dev=0x1e16, revid=0xc4 > domain=0, bus=0, slot=28, func=3 > class=06-04-00, hdrtype=0x01, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=d, irq=10 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message > pcib0: matched entry for 0.28.INTD > pcib0: slot 28 INTD hardwired to IRQ 19 > found-> vendor=0x8086, dev=0x1e26, revid=0x04 > domain=0, bus=0, slot=29, func=0 > class=0c-03-20, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 2 supports D0 D3 current D0 > map[10]: type Memory, range 32, base 0xd4439000, size 10, enabled > pcib0: allocated type 3 (0xd4439000-0xd44393ff) for rid 10 of pci0:0:29:0 > pcib0: matched entry for 0.29.INTA > pcib0: slot 29 INTA hardwired to IRQ 16 > found-> vendor=0x8086, dev=0x1e55, revid=0x04 > domain=0, bus=0, slot=31, func=0 > class=06-01-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x8086, dev=0x1e03, revid=0x04 > domain=0, bus=0, slot=31, func=2 > class=01-06-01, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=b, irq=10 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message > map[10]: type I/O Port, range 32, base 0x5068, size 3, enabled > pcib0: allocated type 4 (0x5068-0x506f) for rid 10 of pci0:0:31:2 > map[14]: type I/O Port, range 32, base 0x5074, size 2, enabled > pcib0: allocated type 4 (0x5074-0x5077) for rid 14 of pci0:0:31:2 > map[18]: type I/O Port, range 32, base 0x5060, size 3, enabled > pcib0: allocated type 4 (0x5060-0x5067) for rid 18 of pci0:0:31:2 > map[1c]: type I/O Port, range 32, base 0x5070, size 2, enabled > pcib0: allocated type 4 (0x5070-0x5073) for rid 1c of pci0:0:31:2 > map[20]: type I/O Port, range 32, base 0x5020, size 5, enabled > pcib0: allocated type 4 (0x5020-0x503f) for rid 20 of pci0:0:31:2 > map[24]: type Memory, range 32, base 0xd4438000, size 11, enabled > pcib0: allocated type 3 (0xd4438000-0xd44387ff) for rid 24 of pci0:0:31:2 > pcib0: matched entry for 0.31.INTB > pcib0: slot 31 INTB hardwired to IRQ 19 > found-> vendor=0x8086, dev=0x1e22, revid=0x04 > domain=0, bus=0, slot=31, func=3 > class=0c-05-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=c, irq=10 > map[10]: type Memory, range 64, base 0xd4434000, size 8, enabled > pcib0: allocated type 3 (0xd4434000-0xd44340ff) for rid 10 of pci0:0:31:3 > map[20]: type I/O Port, range 32, base 0xef80, size 5, enabled > pcib0: allocated type 4 (0xef80-0xef9f) for rid 20 of pci0:0:31:3 > pcib0: matched entry for 0.31.INTC > pcib0: slot 31 INTC hardwired to IRQ 18 > pcib1: irq 16 at device 1.0 on pci0 > pcib0: allocated type 4 (0x4000-0x4fff) for rid 1c of pcib1 > pcib0: allocated type 3 (0xd4300000-0xd43fffff) for rid 20 of pcib1 > pcib0: allocated type 3 (0xc0000000-0xcfffffff) for rid 24 of pcib1 > pcib1: domain 0 > pcib1: secondary bus 1 > pcib1: subordinate bus 1 > pcib1: I/O decode 0x4000-0x4fff > pcib1: memory decode 0xd4300000-0xd43fffff > pcib1: prefetched decode 0xc0000000-0xcfffffff > pcib1: special decode VGA > pci1: on pcib1 > pci1: domain=0, physical bus=1 > found-> vendor=0x1002, dev=0x682d, revid=0x00 > domain=0, bus=1, slot=0, func=0 > class=03-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 3 supports D0 D1 D2 D3 current D0 > MSI supports 1 message, 64 bit > map[10]: type Prefetchable Memory, range 64, base 0xc0000000, size > 28, enabled > pcib1: allocated prefetch range (0xc0000000-0xcfffffff) for rid 10 of > pci0:1:0:0 > map[18]: type Memory, range 64, base 0xd4300000, size 18, enabled > pcib1: allocated memory range (0xd4300000-0xd433ffff) for rid 18 of > pci0:1:0:0 > map[20]: type I/O Port, range 32, base 0x4000, size 8, enabled > pcib1: allocated I/O port range (0x4000-0x40ff) for rid 20 of pci0:1:0:0 > pcib1: matched entry for 1.0.INTA > pcib1: slot 0 INTA hardwired to IRQ 16 > found-> vendor=0x1002, dev=0xaab0, revid=0x00 > domain=0, bus=1, slot=0, func=1 > class=04-03-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=b, irq=10 > powerspec 3 supports D0 D1 D2 D3 current D0 > MSI supports 1 message, 64 bit > map[10]: type Memory, range 64, base 0xd4340000, size 14, enabled > pcib1: allocated memory range (0xd4340000-0xd4343fff) for rid 10 of > pci0:1:0:1 > pcib1: matched entry for 1.0.INTB > pcib1: slot 0 INTB hardwired to IRQ 17 > vgapci0: port 0x4000-0x40ff mem > 0xc0000000-0xcfffffff,0xd4300000-0xd433ffff irq 16 at device 0.0 on pci1 > vgapci0: Boot video device > hdac0: mem 0xd4340000-0xd4343fff irq 17 at > device 0.1 on pci1 > hdac0: PCI card vendor: 0x103c, device: 0x176b > hdac0: HDA Driver Revision: 20120126_0002 > hdac0: Config options: on=0x00000000 off=0x00000000 > hdac0: attempting to allocate 1 MSI vectors (1 supported) > msi: routing MSI IRQ 264 to local APIC 0 vector 59 > hdac0: using IRQ 264 for MSI > hdac0: hdac_get_capabilities: Invalid corb size (0) > device_attach: hdac0 attach returned 6 > xhci0: mem 0xd4420000-0xd442ffff > irq 10 at device 20.0 on pci0 > xhci0: attempting to allocate 1 MSI vectors (8 supported) > msi: routing MSI IRQ 264 to local APIC 0 vector 59 > xhci0: using IRQ 264 for MSI > xhci0: MSI enabled > xhci0: 32 byte context size. > xhci0: Port routing mask set to 0xffffffff > usbus0 on xhci0 > xhci0: usbpf: Attached > pci0: at device 22.0 (no driver attached) > em0: port 0x5040-0x505f mem > 0xd4400000-0xd441ffff,0xd443b000-0xd443bfff irq 17 at device 25.0 on pci0 > em0: attempting to allocate 1 MSI vectors (1 supported) > msi: routing MSI IRQ 265 to local APIC 0 vector 60 > em0: using IRQ 265 for MSI > em0: Using an MSI interrupt > em0: bpf attached > em0: Ethernet address: fc:15:b4:06:78:e5 > ehci0: mem 0xd443a000-0xd443a3ff > irq 16 at device 26.0 on pci0 > ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 61 > usbus1: EHCI version 1.0 > usbus1 on ehci0 > ehci0: usbpf: Attached > hdac0: mem 0xd4430000-0xd4433fff irq > 22 at device 27.0 on pci0 > hdac0: PCI card vendor: 0x103c, device: 0x176b > hdac0: HDA Driver Revision: 20120126_0002 > hdac0: Config options: on=0x00000000 off=0x00000000 > hdac0: attempting to allocate 1 MSI vectors (1 supported) > msi: routing MSI IRQ 266 to local APIC 0 vector 62 > hdac0: using IRQ 266 for MSI > hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256 > pcib2: irq 17 at device 28.0 on pci0 > pcib0: allocated type 3 (0xd4200000-0xd42fffff) for rid 20 of pcib2 > pcib2: domain 0 > pcib2: secondary bus 2 > pcib2: subordinate bus 2 > pcib2: memory decode 0xd4200000-0xd42fffff > pci2: on pcib2 > pci2: domain=0, physical bus=2 > pcib3: irq 16 at device 28.1 on pci0 > pcib0: allocated type 4 (0x2000-0x3fff) for rid 1c of pcib3 > pcib0: allocated type 3 (0xd0000000-0xd3ffffff) for rid 20 of pcib3 > pcib3: domain 0 > pcib3: secondary bus 3 > pcib3: subordinate bus 35 > pcib3: I/O decode 0x2000-0x3fff > pcib3: memory decode 0xd0000000-0xd3ffffff > pci3: on pcib3 > pci3: domain=0, physical bus=3 > pcib4: irq 18 at device 28.2 on pci0 > pcib0: allocated type 3 (0xd4100000-0xd41fffff) for rid 20 of pcib4 > pcib4: domain 0 > pcib4: secondary bus 36 > pcib4: subordinate bus 36 > pcib4: memory decode 0xd4100000-0xd41fffff > pci36: on pcib4 > pci36: domain=0, physical bus=36 > found-> vendor=0x197b, dev=0x2380, revid=0x30 > domain=0, bus=36, slot=0, func=0 > class=0c-00-10, hdrtype=0x00, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message > map[10]: type Memory, range 32, base 0xd4100000, size 11, enabled > pcib4: allocated memory range (0xd4100000-0xd41007ff) for rid 10 of > pci0:36:0:0 > map[14]: type Memory, range 32, base 0xd4105000, size 8, enabled > pcib4: allocated memory range (0xd4105000-0xd41050ff) for rid 14 of > pci0:36:0:0 > pcib4: matched entry for 36.0.INTA > pcib4: slot 0 INTA hardwired to IRQ 18 > found-> vendor=0x197b, dev=0x2392, revid=0x30 > domain=0, bus=36, slot=0, func=1 > class=08-80-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message > map[10]: type Memory, range 32, base 0xd4104000, size 8, enabled > pcib4: allocated memory range (0xd4104000-0xd41040ff) for rid 10 of > pci0:36:0:1 > pcib4: matched entry for 36.0.INTA > pcib4: slot 0 INTA hardwired to IRQ 18 > found-> vendor=0x197b, dev=0x2391, revid=0x30 > domain=0, bus=36, slot=0, func=2 > class=08-05-01, hdrtype=0x00, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message > map[10]: type Memory, range 32, base 0xd4103000, size 8, enabled > pcib4: allocated memory range (0xd4103000-0xd41030ff) for rid 10 of > pci0:36:0:2 > pcib4: matched entry for 36.0.INTA > pcib4: slot 0 INTA hardwired to IRQ 18 > pci36: at device 0.0 (no driver attached) > pci36: at device 0.1 (no driver attached) > sdhci_pci0: mem 0xd4103000-0xd41030ff irq 18 at device > 0.2 on pci36 > sdhci_pci0-slot0: 50MHz 4bits 3.3V 1.8V DMA > sdhci_pci0-slot0: ============== REGISTER DUMP ============== > sdhci_pci0-slot0: Sys addr: 0x00000000 | Version: 0x0000ad01 > sdhci_pci0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 > sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 > sdhci_pci0-slot0: Present: 0x00080000 | Host ctl: 0x00000000 > sdhci_pci0-slot0: Power: 0x00000000 | Blk gap: 0x00000000 > sdhci_pci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000000 > sdhci_pci0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 > sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb > sdhci_pci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000 > sdhci_pci0-slot0: Caps: 0x054032b2 | Max curr: 0x00000000 > sdhci_pci0-slot0: =========================================== > sdhci_pci0: 1 slot(s) allocated > ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 63 > pcib5: irq 19 at device 28.3 on pci0 > pcib0: allocated type 3 (0xd4000000-0xd40fffff) for rid 20 of pcib5 > pcib5: domain 0 > pcib5: secondary bus 37 > pcib5: subordinate bus 37 > pcib5: memory decode 0xd4000000-0xd40fffff > pci37: on pcib5 > pci37: domain=0, physical bus=37 > found-> vendor=0x8086, dev=0x0082, revid=0x34 > domain=0, bus=37, slot=0, func=0 > class=02-80-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message, 64 bit > map[10]: type Memory, range 64, base 0xd4000000, size 13, enabled > pcib5: allocated memory range (0xd4000000-0xd4001fff) for rid 10 of > pci0:37:0:0 > pcib5: matched entry for 37.0.INTA > pcib5: slot 0 INTA hardwired to IRQ 19 > iwn0: mem 0xd4000000-0xd4001fff irq 19 at > device 0.0 on pci37 > iwn0: attempting to allocate 1 MSI vectors (1 supported) > msi: routing MSI IRQ 267 to local APIC 0 vector 64 > iwn0: using IRQ 267 for MSI > iwn0: MIMO 2T2R, MoW, address a4:4e:31:12:91:98 > iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps > iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps > iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps > 24Mbps 36Mbps 48Mbps 54Mbps > iwn0: 2T2R > iwn0: 11na MCS 20MHz > iwn0: MCS 0-7: 6.5Mbps - 65Mbps > iwn0: MCS 8-15: 13Mbps - 130Mbps > iwn0: 11na MCS 20MHz SGI > iwn0: MCS 0-7: 7Mbps - 72Mbps > iwn0: MCS 8-15: 14.5Mbps - 144.5Mbps > iwn0: 11na MCS 40MHz: > iwn0: MCS 0-7: 13.5Mbps - 135Mbps > iwn0: MCS 8-15: 27Mbps - 270Mbps > iwn0: 11na MCS 40MHz SGI: > iwn0: MCS 0-7: 15Mbps - 150Mbps > iwn0: MCS 8-15: 30Mbps - 300Mbps > iwn0: 11ng MCS 20MHz > iwn0: MCS 0-7: 6.5Mbps - 65Mbps > iwn0: MCS 8-15: 13Mbps - 130Mbps > iwn0: 11ng MCS 20MHz SGI > iwn0: MCS 0-7: 7Mbps - 72Mbps > iwn0: MCS 8-15: 14.5Mbps - 144.5Mbps > iwn0: 11ng MCS 40MHz: > iwn0: MCS 0-7: 13.5Mbps - 135Mbps > iwn0: MCS 8-15: 27Mbps - 270Mbps > iwn0: 11ng MCS 40MHz SGI: > iwn0: MCS 0-7: 15Mbps - 150Mbps > iwn0: MCS 8-15: 30Mbps - 300Mbps > ehci1: mem 0xd4439000-0xd44393ff > irq 16 at device 29.0 on pci0 > usbus2: EHCI version 1.0 > usbus2 on ehci1 > ehci1: usbpf: Attached > isab0: at device 31.0 on pci0 > isa0: on isab0 > ahci0: port > 0x5068-0x506f,0x5074-0x5077,0x5060-0x5067,0x5070-0x5073,0x5020-0x503f mem > 0xd4438000-0xd44387ff irq 19 at device 31.2 on pci0 > ahci0: attempting to allocate 1 MSI vectors (1 supported) > msi: routing MSI IRQ 268 to local APIC 0 vector 65 > ahci0: using IRQ 268 for MSI > ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported > ahci0: Caps: 64bit NCQ SS ALP AL CLO 6Gbps PMD SSC PSC 32cmd EM eSATA > 6ports > ahci0: Caps2: APST > ahcich0: at channel 0 on ahci0 > ahcich0: Caps: > ahcich1: at channel 1 on ahci0 > ahcich1: Caps: > ahcich2: not probed (disabled) > ahcich3: at channel 3 on ahci0 > ahcich3: Caps: ESP > ahcich4: at channel 4 on ahci0 > ahcich4: Caps: ESP > ahcich5: at channel 5 on ahci0 > ahcich5: Caps: ESP > ahciem0: on ahci0 > ahciem0: Caps: ALHD XMT SMB LED > pci0: at device 31.3 (no driver attached) > battery0: on acpi0 > battery1: on acpi0 > acpi_acad0: on acpi0 > acpi_button0: on acpi0 > acpi_lid0: on acpi0 > acpi_tz0: on acpi0 > acpi_tz1: on acpi0 > acpi_tz2: on acpi0 > acpi_tz3: on acpi0 > acpi_tz4: on acpi0 > acpi_tz5: on acpi0 > acpi_tz6: on acpi0 > acpi_tz7: on acpi0 > atkbdc0: port 0x60,0x64 irq 1 on acpi0 > atkbd0: irq 1 on atkbdc0 > atkbd: the current kbd controller command byte 0047 > atkbd: keyboard ID 0x41ab (2) > kbd0 at atkbd0 > kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 > ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 66 > atkbd0: [GIANT-LOCKED] > psm0: unable to allocate IRQ > psmcpnp0: irq 12 on acpi0 > psm0: current command byte:0047 > psm0: irq 12 on atkbdc0 > ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 67 > psm0: [GIANT-LOCKED] > psm0: model IntelliMouse, device ID 3-00, 3 buttons > psm0: config:00000000, flags:00000008, packet size:4 > psm0: syncmask:08, syncbits:00 > ppc1: using extended I/O port range > ppc1: SPP ECP ECP+EPP > ppc1: port 0x378-0x37f,0x778-0x77a irq 5 on acpi0 > ppc1: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc1: FIFO with 16/16/15 bytes threshold > ioapic0: routing intpin 5 (ISA IRQ 5) to lapic 0 vector 68 > ppbus0: on ppc1 > lpt0: on ppbus0 > lpt0: Interrupt-driven port > ppi0: on ppbus0 > ACPI: Enabled 4 GPEs in block 00 to 3F > acpi0: wakeup code va 0xfffffe0235ae2000 pa 0x90000 > ahc_isa_identify 0: ioport 0xc00 alloc failed > ahc_isa_identify 1: ioport 0x1c00 alloc failed > ahc_isa_identify 2: ioport 0x2c00 alloc failed > ahc_isa_identify 3: ioport 0x3c00 alloc failed > ahc_isa_identify 4: ioport 0x4c00 alloc failed > ahc_isa_identify 5: ioport 0x5c00 alloc failed > ahc_isa_identify 6: ioport 0x6c00 alloc failed > ahc_isa_identify 7: ioport 0x7c00 alloc failed > ahc_isa_identify 8: ioport 0x8c00 alloc failed > ahc_isa_identify 9: ioport 0x9c00 alloc failed > ahc_isa_identify 10: ioport 0xac00 alloc failed > ahc_isa_identify 11: ioport 0xbc00 alloc failed > ahc_isa_identify 12: ioport 0xcc00 alloc failed > ahc_isa_identify 13: ioport 0xdc00 alloc failed > ahc_isa_identify 14: ioport 0xec00 alloc failed > ex_isa_identify() > pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0 > pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0 > pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0 > pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0 > pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0 > pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0 > pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0 > pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0 > pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0 > pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0 > pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0 > pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0 > pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0 > isa_probe_children: disabling PnP devices > atkbdc: atkbdc0 already exists; skipping it > atrtc: atrtc0 already exists; skipping it > attimer: attimer0 already exists; skipping it > sc: sc0 already exists; skipping it > isa_probe_children: probing non-PnP devices > orm0: at iomem 0xc0000-0xcffff on isa0 > sc0: at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) > vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0 > pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0 > pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0 > pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0 > fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > ppc0: cannot reserve I/O port range > ppc0 failed to probe at irq 7 on isa0 > pcib0: allocated type 4 (0x3f8-0x3ff) for rid 0 of uart0 > uart0 failed to probe at port 0x3f8-0x3ff irq 4 on isa0 > pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1 > uart1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 > wbwd0 failed to probe on isa0 > isa_probe_children: probing PnP devices > est0: on cpu0 > p4tcc0: on cpu0 > est1: on cpu1 > p4tcc1: on cpu1 > est2: on cpu2 > p4tcc2: on cpu2 > est3: on cpu3 > p4tcc3: on cpu3 > est4: on cpu4 > p4tcc4: on cpu4 > est5: on cpu5 > p4tcc5: on cpu5 > est6: on cpu6 > p4tcc6: on cpu6 > est7: on cpu7 > p4tcc7: on cpu7 > Device configuration finished. > procfs registered > lapic: Divisor 2, Frequency 49887747 Hz > Timecounters tick every 1.000 msec > vlan: initialized, using hash tables with chaining > tcp_init: net.inet.tcp.tcbhashsize auto tuned to 65536 > lo0: bpf attached > hptnr: no controller detected. > hpt27xx: no controller detected. > hptrr: no controller detected. > hdacc0: at cad 0 on hdac0 > hdaa0: at nid 1 on hdacc0 > hdaa0: Subsystem ID: 0x103c176b > hdaa0: NumGPIO=3 NumGPO=0 NumGPI=0 GPIWake=1 GPIUnsol=1 > hdaa0: GPIO0: disabled > hdaa0: GPIO1: disabled > hdaa0: GPIO2: disabled > hdaa0: Original pins configuration: > hdaa0: nid 0x as seq device conn jack loc color > misc > hdaa0: 10 21011030 3 0 Line-out Jack 1/8 Ext-Rear Black 0 > hdaa0: 11 0421101f 1 15 Headphones Jack 1/8 Right Black 0 > hdaa0: 12 04a11020 2 0 Mic Jack 1/8 Right Black 0 > hdaa0: 13 90170110 1 0 Speaker Fixed Analog Internal Unknown 1 > hdaa0: 14 40f000f0 15 0 Other None Unknown 0x00 Unknown 0 > hdaa0: 15 2181102e 2 14 Line-in Jack 1/8 Ext-Rear Black 0 > hdaa0: 16 40f000f0 15 0 Other None Unknown 0x00 Unknown 0 > hdaa0: 17 d5a30140 4 0 Mic Both ATAPI 0x15 Unknown 1 > hdaa0: 31 40f000f0 15 0 Other None Unknown 0x00 Unknown 0 > hdaa0: 32 40f000f0 15 0 Other None Unknown 0x00 Unknown 0 > hdaa0: Patched pins configuration: > hdaa0: nid 0x as seq device conn jack loc color > misc > hdaa0: 10 21011030 3 0 Line-out Jack 1/8 Ext-Rear Black 0 > hdaa0: 11 0421101f 1 15 Headphones Jack 1/8 Right Black 0 > hdaa0: 12 04a11020 2 0 Mic Jack 1/8 Right Black 0 > hdaa0: 13 90170110 1 0 Speaker Fixed Analog Internal Unknown 1 > hdaa0: 14 40f000f0 15 0 Other None Unknown 0x00 Unknown 0 > DISA > hdaa0: 15 2181102e 2 14 Line-in Jack 1/8 Ext-Rear Black 0 > hdaa0: 16 40f000f0 15 0 Other None Unknown 0x00 Unknown 0 > DISA > hdaa0: 17 d5a30140 4 0 Mic Both ATAPI 0x15 Unknown 1 > hdaa0: 31 40f000f0 15 0 Other None Unknown 0x00 Unknown 0 > DISA > hdaa0: 32 40f000f0 15 0 Other None Unknown 0x00 Unknown 0 > DISA > hdaa0: 4 associations found: > hdaa0: Association 0 (1) out: > hdaa0: Pin nid=13 seq=0 > hdaa0: Pin nid=11 seq=15 > hdaa0: Association 1 (2) in: > hdaa0: Pin nid=12 seq=0 > hdaa0: Pin nid=15 seq=14 > hdaa0: Association 2 (3) out: > hdaa0: Pin nid=10 seq=0 > hdaa0: Association 3 (4) in: > hdaa0: Pin nid=17 seq=0 > hdaa0: Tracing association 0 (1) > hdaa0: Pin 13 traced to DAC 19 > hdaa0: Pin 11 traced to DAC 19 and hpredir 0 > hdaa0: Association 0 (1) trace succeeded > hdaa0: Tracing association 1 (2) > hdaa0: Pin 12 traced to ADC 21 > hdaa0: Pin 15 traced to ADC 21 > hdaa0: Association 1 (2) trace succeeded > hdaa0: Tracing association 2 (3) > hdaa0: Pin 10 traced to DAC 20 > hdaa0: Association 2 (3) trace succeeded > hdaa0: Tracing association 3 (4) > hdaa0: Pin 17 traced to ADC 22 > hdaa0: Association 3 (4) trace succeeded > hdaa0: Looking for additional DAC for association 0 (1) > hdaa0: Looking for additional ADC for association 1 (2) > hdaa0: Looking for additional DAC for association 2 (3) > hdaa0: Looking for additional ADC for association 3 (4) > hdaa0: Tracing input monitor > hdaa0: Tracing nid 27 to out > hdaa0: nid 27 is input monitor > hdaa0: Tracing other input monitors > hdaa0: Tracing nid 12 to out > hdaa0: Tracing nid 15 to out > hdaa0: Tracing nid 17 to out > hdaa0: Tracing beeper > hdaa0: Headphones redirection for association 0 nid=11 using unsolicited > responses. > hdaa0: Redirect output to: main > hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref > pcm0: at nid 13,11 and 12,15 on hdaa0 > pcm0: Playback: > pcm0: Stream cap: 0x00000001 PCM > pcm0: PCM cap: 0x000e05e0 16 20 24 bits, 44 48 88 96 192 KHz > pcm0: DAC: 19 > pcm0: > pcm0: nid=13 [pin: Speaker (Fixed)] > pcm0: + <- nid=19 [audio output] [src: pcm] > pcm0: > pcm0: nid=11 [pin: Headphones (Black Jack)] > pcm0: + <- nid=19 [audio output] [src: pcm] > pcm0: > pcm0: Record: > pcm0: Stream cap: 0x00000001 PCM > pcm0: PCM cap: 0x000e05e0 16 20 24 bits, 44 48 88 96 192 KHz > pcm0: ADC: 21 > pcm0: > pcm0: nid=21 [audio input] > pcm0: + <- nid=23 [audio selector] [src: line, mic, mix] > pcm0: + <- nid=12 [pin: Mic (Black Jack)] [src: mic] > pcm0: + <- nid=15 [pin: Line-in (Black Jack)] [src: line] > pcm0: + <- nid=27 [audio mixer] [src: mix] > pcm0: > pcm0: Input Mix: > pcm0: > pcm0: nid=27 [audio mixer] > pcm0: + <- nid=12 [pin: Mic (Black Jack)] [src: mic] > pcm0: + <- nid=15 [pin: Line-in (Black Jack)] [src: line] > pcm0: > pcm0: Master Volume (OSS: vol): -95/0dB > pcm0: +- ctl 7 (nid 19 out): -95/0dB (128 steps) + mute > pcm0: > pcm0: PCM Volume (OSS: pcm): -95/0dB > pcm0: +- ctl 7 (nid 19 out): -95/0dB (128 steps) + mute > pcm0: > pcm0: Microphone Volume (OSS: mic): 0/30dB > pcm0: +- ctl 2 (nid 12 out): 0/30dB (4 steps) > pcm0: +- ctl 9 (nid 23 out): 0/22dB (16 steps) + mute > pcm0: +- ctl 11 (nid 27 in 0): -34/12dB (32 steps) + mute > pcm0: > pcm0: Line-in Volume (OSS: line): 0/30dB > pcm0: +- ctl 4 (nid 15 out): 0/30dB (4 steps) > pcm0: +- ctl 9 (nid 23 out): 0/22dB (16 steps) + mute > pcm0: +- ctl 13 (nid 27 in 2): -34/12dB (32 steps) + mute > pcm0: > pcm0: Speaker/Beep Volume (OSS: speaker): -18/0dB > pcm0: +- ctl 20 (nid 33 out): -18/0dB (4 steps) + mute > pcm0: > pcm0: Recording Level (OSS: rec): 0/22dB > pcm0: +- ctl 9 (nid 23 out): 0/22dB (16 steps) + mute > pcm0: +- ctl 11 (nid 27 in 0): -34/12dB (32 steps) + mute > pcm0: +- ctl 13 (nid 27 in 2): -34/12dB (32 steps) + mute > pcm0: > pcm0: Input Mix Level (OSS: mix): 0/22dB > pcm0: +- ctl 9 (nid 23 out): 0/22dB (16 steps) + mute > pcm0: > pcm0: Mixer "vol": > pcm0: Mixer "pcm": > pcm0: Mixer "speaker": > pcm0: Mixer "line": > pcm0: Mixer "mic": > pcm0: Mixer "mix": > pcm0: Mixer "rec": > pcm0: Mixer "ogain": > pcm0: Playback channel set is: Front Left, Front Right, > pcm0: Playback channel matrix is: 2.0 (unknown) > pcm0: Recording channel set is: Front Left, Front Right, > pcm0: Recording channel matrix is: 2.0 (disconnected) > pcm1: at nid 10 and 17 on hdaa0 > pcm1: Playback: > pcm1: Stream cap: 0x00000001 PCM > pcm1: PCM cap: 0x000e05e0 16 20 24 bits, 44 48 88 96 192 KHz > pcm1: DAC: 20 > pcm1: > pcm1: nid=10 [pin: Line-out (Black Jack)] > pcm1: + <- nid=20 [audio output] [src: pcm] > pcm1: > pcm1: Record: > pcm1: Stream cap: 0x00000001 PCM > pcm1: PCM cap: 0x000e05e0 16 20 24 bits, 44 48 88 96 192 KHz > pcm1: ADC: 22 > pcm1: > pcm1: nid=22 [audio input] > pcm1: + <- nid=24 [audio selector] [src: monitor] > pcm1: + <- nid=17 [pin: Mic (Both)] [src: monitor] > pcm1: > pcm1: Master Volume (OSS: vol): -95/0dB > pcm1: +- ctl 8 (nid 20 out): -95/0dB (128 steps) + mute > pcm1: > pcm1: PCM Volume (OSS: pcm): -95/0dB > pcm1: +- ctl 8 (nid 20 out): -95/0dB (128 steps) + mute > pcm1: > pcm1: Microphone2 Volume (OSS: monitor): 0/30dB > pcm1: +- ctl 5 (nid 17 out): 0/30dB (4 steps) > pcm1: +- ctl 10 (nid 24 out): 0/22dB (16 steps) + mute > pcm1: > pcm1: Recording Level (OSS: rec): 0/22dB > pcm1: +- ctl 5 (nid 17 out): 0/30dB (4 steps) > pcm1: +- ctl 10 (nid 24 out): 0/22dB (16 steps) + mute > pcm1: > pcm1: Mixer "vol": > pcm1: Mixer "pcm": > pcm1: Mixer "rec": > pcm1: Mixer "ogain": > pcm1: Mixer "monitor": > pcm1: Playback channel set is: Front Left, Front Right, > pcm1: Playback channel matrix is: 2.0 (disconnected) > pcm1: Automatically set rec source to: monitor > pcm1: Recording channel set is: Front Left, Front Right, > pcm1: Recording channel matrix is: 2.0 (unknown) > random: unblocking device. > usbus0: 5.0Gbps Super Speed USB v3.0 > usbus1: 480Mbps High Speed USB v2.0 > usbus2: 480Mbps High Speed USB v2.0 > ahcich0: AHCI reset... > ahcich0: SATA connect time=1000us status=00000123 > ahcich0: AHCI reset: device found > ahcich1: AHCI reset... > ahcich1: SATA connect time=1800us status=00000113 > ahcich1: AHCI reset: device found > ahcich1: AHCI reset: device ready after 0ms > ahcich3: AHCI reset... > ugen1.1: at usbus1 > uhub0: on usbus1 > ugen0.1: <0x8086> at usbus0 > uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 > ugen2.1: at usbus2 > uhub2: on usbus2 > ahcich3: SATA connect timeout time=10000us status=00000000 > ahcich3: AHCI reset: device not found > ahcich4: AHCI reset... > ahcich4: SATA connect timeout time=10000us status=00000000 > ahcich4: AHCI reset: device not found > ahcich5: AHCI reset... > ahcich5: SATA connect timeout time=10000us status=00000000 > ahcich5: AHCI reset: device not found > battery0: battery initialization start > battery1: battery initialization start > acpi_acad0: acline initialization start > acpi_acad0: On Line > acpi_acad0: acline initialization done, tried 1 times > ahcich0: AHCI reset: device ready after 100ms > ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 > ada0: ATA-9 SATA 2.x device > ada0: Serial Number TF0500Y91YESKL > ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > ada0: Command Queueing enabled > ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) > ada0: Previously was known as ad4 > GEOM: new disk ada0 > GEOM: new disk cd0 > ses0 at ahciem0 bus 0 scbus5 target 0 lun 0 > ses0: SEMB S-E-S 2.00 device > ses0: SEMB SES Device > pass0 at ahcich0 bus 0 scbus0 target 0 lun 0 > pass0: ATA-9 SATA 2.x device > pass0: Serial Number TF0500Y91YESKL > pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > ses0: Generation Code 0x0 has 1 SubEnclosures > ses0: SubEnclosure ID 0, 1 Types With this ID, Descriptor Length 36, > offset 8 > ses0: WWN: 0 > ses0: Type Desc[0]: Type 0x17, MaxElt 6, In Subenc 0, Text Length 0: > pass0: Command Queueing enabled > pass1 at ahcich1 bus 0 scbus1 target 0 lun 0 > pass1: Removable CD-ROM SCSI-0 device > pass1: Serial Number R8Y66GOCC00JQQ > pass1: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO > 8192bytes) > pass2 at ahciem0 bus 0 scbus5 target 0 lun 0 > pass2: SEMB S-E-S 2.00 device > cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 > cd0: Removable CD-ROM SCSI-0 device > cd0: Serial Number R8Y66GOCC00JQQ > cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) > cd0: Attempt to query device size failed: NOT READY, Medium not present - > tray closed > battery0: battery initialization done, tried 1 times > Netvsc initializing... lapic7: CMCI unmasked > lapic6: CMCI unmasked > lapic3: CMCI unmasked > lapic2: CMCI unmasked > lapic4: CMCI unmasked > lapic5: CMCI unmasked > SMP: AP CPU #1 Launched! > cpu1 AP: > ID: 0x01000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 > cmci: 0x000100f2 > SMP: AP CPU #3 Launched! > cpu3 AP: > ID: 0x03000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 > cmci: 0x000000f2 > SMP: AP CPU #4 Launched! > cpu4 AP: > ID: 0x04000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 > cmci: 0x000000f2 > SMP: AP CPU #6 Launched! > cpu6 AP: > ID: 0x06000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 > cmci: 0x000000f2 > SMP: AP CPU #2 Launched! > cpu2 AP: > ID: 0x02000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 > cmci: 0x000000f2 > SMP: AP CPU #7 Launched! > cpu7 AP: > ID: 0x07000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 > cmci: 0x000000f2 > SMP: AP CPU #5 Launched! > cpu5 AP: > ID: 0x05000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 > cmci: 0x000000f2 > ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 1 vector 48 > ioapic0: routing intpin 5 (ISA IRQ 5) to lapic 2 vector 48 > ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 3 vector 48 > ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 4 vector 48 > ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 5 vector 48 > ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 6 vector 48 > msi: Assigning MSI-X IRQ 257 to local APIC 1 vector 49 > msi: Assigning MSI-X IRQ 258 to local APIC 2 vector 49 > msi: Assigning MSI-X IRQ 259 to local APIC 3 vector 49 > msi: Assigning MSI-X IRQ 260 to local APIC 4 vector 49 > msi: Assigning MSI-X IRQ 261 to local APIC 5 vector 49 > msi: Assigning MSI-X IRQ 262 to local APIC 6 vector 49 > msi: Assigning MSI-X IRQ 263 to local APIC 7 vector 48 > msi: Assigning MSI IRQ 264 to local APIC 7 vector 49 > msi: Assigning MSI IRQ 266 to local APIC 1 vector 50 > msi: Assigning MSI IRQ 267 to local APIC 2 vector 50 > msi: Assigning MSI IRQ 268 to local APIC 3 vector 50 > SMP: passed TSC synchronization test > TSC timecounter discards lower 1 bit(s) > Timecounter "TSC-low" frequency 1197305844 Hz quality 1000 > GEOM_PART: partition 1 is not aligned on 4096 bytes > GEOM_PART: partition 3 is not aligned on 4096 bytes > GEOM_PART: partition 1 is not aligned on 4096 bytes > GEOM_PART: partition 2 is not aligned on 4096 bytes > GEOM_PART: partition 4 is not aligned on 4096 bytes > GEOM_PART: partition 5 is not aligned on 4096 bytes > GEOM_PART: partition 6 is not aligned on 4096 bytes > GEOM_PART: partition 7 is not aligned on 4096 bytes > uhub1: 8 ports with 8 removable, self powered > GEOM_PART: partition 1 is not aligned on 4096 bytes > GEOM_PART: partition 3 is not aligned on 4096 bytes > GEOM_PART: partition 1 is not aligned on 4096 bytes > GEOM_PART: partition 2 is not aligned on 4096 bytes > GEOM_PART: partition 4 is not aligned on 4096 bytes > GEOM_PART: partition 5 is not aligned on 4096 bytes > GEOM_PART: partition 6 is not aligned on 4096 bytes > GEOM_PART: partition 7 is not aligned on 4096 bytes > Root mount waiting for: usbus2 usbus1 > uhub2: 3 ports with 3 removable, self powered > uhub0: 3 ports with 3 removable, self powered > Root mount waiting for: usbus2 usbus1 > ugen1.2: at usbus1 > uhub3: on > usbus1 > ugen2.2: at usbus2 > uhub4: on > usbus2 > Root mount waiting for: usbus2 usbus1 > uhub3: 6 ports with 6 removable, self powered > uhub4: 8 ports with 8 removable, self powered > Root mount waiting for: usbus2 usbus1 > ugen1.3: at usbus1 > ugen2.3: at usbus2 > ugen1.4: at usbus1 > Trying to mount root from ufs:/dev/ada0s1a [rw]... > start_init: trying /sbin/init > em0: Link is up 100 Mbps Full Duplex > ubt0: on usbus2 > WARNING: attempt to domain_add(bluetooth) after domainfinalize() > WARNING: attempt to domain_add(netgraph) after domainfinalize() > battery1: battery initialization failed, giving up > -------------- next part -------------- > hw.acpi.supported_sleep_state: S3 S4 S5 > hw.acpi.power_button_state: S5 > hw.acpi.sleep_button_state: S3 > hw.acpi.lid_switch_state: NONE > hw.acpi.standby_state: NONE > hw.acpi.suspend_state: S3 > hw.acpi.sleep_delay: 1 > hw.acpi.s4bios: 0 > hw.acpi.verbose: 0 > hw.acpi.disable_on_reboot: 0 > hw.acpi.handle_reboot: 1 > hw.acpi.reset_video: 0 > hw.acpi.cpu.cx_lowest: C1 > hw.acpi.battery.life: 96 > hw.acpi.battery.time: -1 > hw.acpi.battery.state: 0 > hw.acpi.battery.units: 2 > hw.acpi.battery.info_expire: 5 > hw.acpi.acline: 1 > hw.acpi.thermal.min_runtime: 0 > hw.acpi.thermal.polling_rate: 10 > hw.acpi.thermal.user_override: 0 > hw.acpi.thermal.tz0.temperature: 57.0C > hw.acpi.thermal.tz0.active: -1 > hw.acpi.thermal.tz0.passive_cooling: 0 > hw.acpi.thermal.tz0.thermal_flags: 0 > hw.acpi.thermal.tz0._PSV: -1 > hw.acpi.thermal.tz0._HOT: 104.0C > hw.acpi.thermal.tz0._CRT: 128.0C > hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 > hw.acpi.thermal.tz0._TC1: -1 > hw.acpi.thermal.tz0._TC2: -1 > hw.acpi.thermal.tz0._TSP: -1 > hw.acpi.thermal.tz1.temperature: 51.0C > hw.acpi.thermal.tz1.active: -1 > hw.acpi.thermal.tz1.passive_cooling: 1 > hw.acpi.thermal.tz1.thermal_flags: 0 > hw.acpi.thermal.tz1._PSV: 108.0C > hw.acpi.thermal.tz1._HOT: -1 > hw.acpi.thermal.tz1._CRT: 128.0C > hw.acpi.thermal.tz1._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 > hw.acpi.thermal.tz1._TC1: 1 > hw.acpi.thermal.tz1._TC2: 2 > hw.acpi.thermal.tz1._TSP: 300 > hw.acpi.thermal.tz2.temperature: 47.0C > hw.acpi.thermal.tz2.active: -1 > hw.acpi.thermal.tz2.passive_cooling: 0 > hw.acpi.thermal.tz2.thermal_flags: 0 > hw.acpi.thermal.tz2._PSV: -1 > hw.acpi.thermal.tz2._HOT: -1 > hw.acpi.thermal.tz2._CRT: 128.0C > hw.acpi.thermal.tz2._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 > hw.acpi.thermal.tz2._TC1: -1 > hw.acpi.thermal.tz2._TC2: -1 > hw.acpi.thermal.tz2._TSP: -1 > hw.acpi.thermal.tz3.temperature: 47.0C > hw.acpi.thermal.tz3.active: -1 > hw.acpi.thermal.tz3.passive_cooling: 0 > hw.acpi.thermal.tz3.thermal_flags: 0 > hw.acpi.thermal.tz3._PSV: -1 > hw.acpi.thermal.tz3._HOT: -1 > hw.acpi.thermal.tz3._CRT: 128.0C > hw.acpi.thermal.tz3._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 > hw.acpi.thermal.tz3._TC1: -1 > hw.acpi.thermal.tz3._TC2: -1 > hw.acpi.thermal.tz3._TSP: -1 > hw.acpi.thermal.tz4.temperature: 31.0C > hw.acpi.thermal.tz4.active: -1 > hw.acpi.thermal.tz4.passive_cooling: 0 > hw.acpi.thermal.tz4.thermal_flags: 0 > hw.acpi.thermal.tz4._PSV: 55.0C > hw.acpi.thermal.tz4._HOT: -1 > hw.acpi.thermal.tz4._CRT: 128.0C > hw.acpi.thermal.tz4._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 > hw.acpi.thermal.tz4._TC1: 50 > hw.acpi.thermal.tz4._TC2: 0 > hw.acpi.thermal.tz4._TSP: 300 > hw.acpi.thermal.tz5.temperature: 127.0C > hw.acpi.thermal.tz5.active: -1 > hw.acpi.thermal.tz5.passive_cooling: 0 > hw.acpi.thermal.tz5.thermal_flags: 0 > hw.acpi.thermal.tz5._PSV: -1 > hw.acpi.thermal.tz5._HOT: -1 > hw.acpi.thermal.tz5._CRT: 128.0C > hw.acpi.thermal.tz5._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 > hw.acpi.thermal.tz5._TC1: -1 > hw.acpi.thermal.tz5._TC2: -1 > hw.acpi.thermal.tz5._TSP: -1 > hw.acpi.thermal.tz6.temperature: 0.0C > hw.acpi.thermal.tz6.active: -1 > hw.acpi.thermal.tz6.passive_cooling: 0 > hw.acpi.thermal.tz6.thermal_flags: 0 > hw.acpi.thermal.tz6._PSV: -1 > hw.acpi.thermal.tz6._HOT: -1 > hw.acpi.thermal.tz6._CRT: 128.0C > hw.acpi.thermal.tz6._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 > hw.acpi.thermal.tz6._TC1: -1 > hw.acpi.thermal.tz6._TC2: -1 > hw.acpi.thermal.tz6._TSP: -1 > hw.acpi.thermal.tz7.temperature: 0.0C > hw.acpi.thermal.tz7.active: -1 > hw.acpi.thermal.tz7.passive_cooling: 0 > hw.acpi.thermal.tz7.thermal_flags: 0 > hw.acpi.thermal.tz7._PSV: -1 > hw.acpi.thermal.tz7._HOT: -1 > hw.acpi.thermal.tz7._CRT: 128.0C > hw.acpi.thermal.tz7._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 > hw.acpi.thermal.tz7._TC1: -1 > hw.acpi.thermal.tz7._TC2: -1 > hw.acpi.thermal.tz7._TSP: -1 > > ------------------------------ > > Message: 2 > Date: Sat, 6 Sep 2014 02:01:41 +1000 (EST) > From: Ian Smith > To: nick gigashvili > Cc: freebsd-acpi@freebsd.org > Subject: Re: Problems with acpi (battery status not shown) > Message-ID: <20140906013705.Y58647@sola.nimnet.asn.au> > Content-Type: TEXT/PLAIN; CHARSET=US-ASCII > > On Fri, 5 Sep 2014 18:43:23 +0400, nick gigashvili wrote: > > Hi > > > > I'm having problem with acpi battery status is not updated it is > freezed on > > 96% when on AC power, I'm running FreeBSD 10-RELEASE on HP Workstation > > 8570w. > > I tested ASL with iasl and it has syntax error. I coultn't boot with > acpi > > turned off so Im sending you dmesg output only with acpi enabled. > > > > here is ASL file link: > > https://www.sendspace.com/file/do5xn7 > > > > Thank you > > Your hw.acpi tree and verbose dmesg look alright on a very quick browse. > No AE_* ACPI errors and battery initialisation looks good, assuming you > have just one battery fitted of the two supported. > > It's quite possible that there's no problem. Li-Ion batteries are not > trickle-charged like older technology batteries (NiCd or NiMH) but after > a full charge gradually self-discharge over days, perhaps weeks while > the laptop is powered, until the battery gets down to below around 95% > (on my Thinkpads anyway), when it will get boosted back to 100% again. > > My X200 is down to 95%; I'm expecting a charge cycle any day now :) > > State: high > Remaining capacity: 95% > Remaining time: unknown > Present rate: 0 mW > Present voltage: 12418 mV > > Try unplugging power and watching with acpiconf -i0 until down to say > 90% or lower, then reconnect power; it should charge up to 100% again, > and stay up around 98-99% for a while before gradually dropping. > > If it doesn't, try reporting the result of acpiconf -i0 at different > states and times; just the lines above will do, except for the first. > > And don't forget to let it run on battery sometimes, it's good for it; > occasional deep (or even complete) discharges help keep the battery's > internal 'coulomb counter' in good shape, and don't hurt battery life. > > cheers, Ian > > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > freebsd-acpi@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-acpi > To unsubscribe, send any mail to "freebsd-acpi-unsubscribe@freebsd.org" > > ------------------------------ > > End of freebsd-acpi Digest, Vol 456, Issue 2 > ******************************************** > From owner-freebsd-acpi@FreeBSD.ORG Mon Sep 8 13:00:49 2014 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 59D3DE4 for ; Mon, 8 Sep 2014 13:00:49 +0000 (UTC) Received: from sola.nimnet.asn.au (paqi.nimnet.asn.au [115.70.110.159]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id BC1C1197E for ; Mon, 8 Sep 2014 13:00:47 +0000 (UTC) Received: from localhost (localhost [127.0.0.1]) by sola.nimnet.asn.au (8.14.2/8.14.2) with ESMTP id s88D0cqc071337; Mon, 8 Sep 2014 23:00:38 +1000 (EST) (envelope-from smithi@nimnet.asn.au) Date: Mon, 8 Sep 2014 23:00:38 +1000 (EST) From: Ian Smith To: nick gigashvili Subject: Re: Problems with acpi (battery status not shown) In-Reply-To: Message-ID: <20140908213852.L58647@sola.nimnet.asn.au> References: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Cc: freebsd-acpi@freebsd.org X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.18-1 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 08 Sep 2014 13:00:49 -0000 On Mon, 8 Sep 2014 14:41:46 +0400, nick gigashvili wrote: > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of freebsd-acpi digest..." One has to be really careful replying to digests; not only to restore the Subject but also to quote no more than necessary to follow the one message or topic. We already had your verbose dmesg etc .. > Thanks Ian for response Ill do as you suggested... Let us know. My X200 dropped back to 94% today but remains relaxed. > what about ASL syntax error shouldn't I pay attantion to it ? I wouldn't know, only a little bit about batteries. You need to show exact error message/s to interest someone who knows what those mean. I had a brief dive into a few sections of your 925KiB hp-8570w.asl and managed to surface before drowning .. little the wiser. Your original message below for context, without attachments. cheers, Ian > > Message: 1 > > Date: Fri, 5 Sep 2014 18:43:23 +0400 > > From: nick gigashvili > > To: freebsd-acpi@freebsd.org > > Subject: Problems with acpi (battery status not shown) > > Message-ID: > > > w@mail.gmail.com> > > Content-Type: text/plain; charset="utf-8" > > > > Hi > > > > I'm having problem with acpi battery status is not updated it is freezed on > > 96% when on AC power, I'm running FreeBSD 10-RELEASE on HP Workstation > > 8570w. > > I tested ASL with iasl and it has syntax error. I coultn't boot with acpi > > turned off so Im sending you dmesg output only with acpi enabled. > > > > here is ASL file link: > > https://www.sendspace.com/file/do5xn7 > > > > Thank you > > -------------- next part -------------- > > Table 'FACP' at 0xbeffc000 > > Table 'HPET' at 0xbeffb000 > > Table 'APIC' at 0xbeffa000 [..] From owner-freebsd-acpi@FreeBSD.ORG Tue Sep 9 19:44:58 2014 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 60FA0174 for ; Tue, 9 Sep 2014 19:44:58 +0000 (UTC) Received: from mail-yk0-x22a.google.com (mail-yk0-x22a.google.com [IPv6:2607:f8b0:4002:c07::22a]) (using TLSv1 with cipher ECDHE-RSA-RC4-SHA (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 11332D0A for ; Tue, 9 Sep 2014 19:44:58 +0000 (UTC) Received: by mail-yk0-f170.google.com with SMTP id 19so1861934ykq.1 for ; Tue, 09 Sep 2014 12:44:57 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; bh=m1+EaQTt3cQOMEb/YqNvCWeZHq2hgkiaGDvkCdqtXRY=; b=ZfRkN+p4UYhniF7sn5XVIymyaWbSPYEKVXbHPdPjq9ymaVOegA+oPa0Do4l9xw3xRE e/lWELa4Nttm7x5mZDwWCx2+W8B5vGCaCIss89+87t0GIBZDvPJKEGWcRCjO6oLJ301B DmWOczc8utTfSDDmyzu4+/TPXlw5dHN7J1HXkysdS7cne/2KONrIOynRSAageW/G8MU5 fdeqU9zb5gbwaycQep0MBodBG0p/4KwzNIijBB31RrWjcQaMcE0/ozqtNDcwArXC871b wbeAb4oSQhwjZq0leYp/L3UbHeDlUL2ey/VGm219vOj9dA/0j8AlVKr1zX7BPqVaKVkK 6Y9A== MIME-Version: 1.0 X-Received: by 10.236.93.177 with SMTP id l37mr25888643yhf.88.1410291897152; Tue, 09 Sep 2014 12:44:57 -0700 (PDT) Received: by 10.170.132.197 with HTTP; Tue, 9 Sep 2014 12:44:56 -0700 (PDT) In-Reply-To: <20140908213852.L58647@sola.nimnet.asn.au> References: <20140908213852.L58647@sola.nimnet.asn.au> Date: Tue, 9 Sep 2014 23:44:56 +0400 Message-ID: Subject: Re: Problems with acpi (battery status not shown) From: nick gigashvili To: Ian Smith Content-Type: multipart/mixed; boundary=20cf3010eaf58f695e0502a72bcf X-Content-Filtered-By: Mailman/MimeDel 2.1.18-1 Cc: freebsd-acpi@freebsd.org X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.18-1 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 09 Sep 2014 19:44:58 -0000 --20cf3010eaf58f695e0502a72bcf Content-Type: text/plain; charset=UTF-8 Hi again I did as you suggested I tested with acpiconf with different times and different states here are the results. first two files are when laptop was charging only difference in these two files was in Present voltage last two files are when laptop was discharging there is no difference in these two. After couple hours it ran out of battery and l aptop was powered off then I put it on AC power and turned it on battery was at 0% and charging and after some time it is still at 0% and charging Now regarding to ASL file I ran iasl my-asl.asl and on line 27104 there was syntax error with "Package (0x06)" unfortunately I don'tunderstand a damn thing with ASL syntax ... maybe this will make no difference but still I tried Thanks On Mon, Sep 8, 2014 at 5:00 PM, Ian Smith wrote: > On Mon, 8 Sep 2014 14:41:46 +0400, nick gigashvili wrote: > > > > When replying, please edit your Subject line so it is more specific > > > than "Re: Contents of freebsd-acpi digest..." > > One has to be really careful replying to digests; not only to restore > the Subject but also to quote no more than necessary to follow the one > message or topic. We already had your verbose dmesg etc .. > > > Thanks Ian for response Ill do as you suggested... > > Let us know. My X200 dropped back to 94% today but remains relaxed. > > > what about ASL syntax error shouldn't I pay attantion to it ? > > I wouldn't know, only a little bit about batteries. You need to show > exact error message/s to interest someone who knows what those mean. > > I had a brief dive into a few sections of your 925KiB hp-8570w.asl and > managed to surface before drowning .. little the wiser. > > Your original message below for context, without attachments. > > cheers, Ian > > > > Message: 1 > > > Date: Fri, 5 Sep 2014 18:43:23 +0400 > > > From: nick gigashvili > > > To: freebsd-acpi@freebsd.org > > > Subject: Problems with acpi (battery status not shown) > > > Message-ID: > > > > > w@mail.gmail.com> > > > Content-Type: text/plain; charset="utf-8" > > > > > > Hi > > > > > > I'm having problem with acpi battery status is not updated it is > freezed on > > > 96% when on AC power, I'm running FreeBSD 10-RELEASE on HP Workstation > > > 8570w. > > > I tested ASL with iasl and it has syntax error. I coultn't boot with > acpi > > > turned off so Im sending you dmesg output only with acpi enabled. > > > > > > here is ASL file link: > > > https://www.sendspace.com/file/do5xn7 > > > > > > Thank you > > > -------------- next part -------------- > > > Table 'FACP' at 0xbeffc000 > > > Table 'HPET' at 0xbeffb000 > > > Table 'APIC' at 0xbeffa000 > > [..] > --20cf3010eaf58f695e0502a72bcf Content-Type: text/plain; charset=US-ASCII; name="charging-acpiconf-1-39pm.txt" Content-Disposition: attachment; filename="charging-acpiconf-1-39pm.txt" Content-Transfer-Encoding: base64 X-Attachment-Id: f_hzvejsz10 RGVzaWduIGNhcGFjaXR5Ogk0NjkwIG1BaApMYXN0IGZ1bGwgY2FwYWNpdHk6CTQ2OTAgbUFoClRl Y2hub2xvZ3k6CQlzZWNvbmRhcnkgKHJlY2hhcmdlYWJsZSkKRGVzaWduIHZvbHRhZ2U6CQkxNDQw MCBtVgpDYXBhY2l0eSAod2Fybik6CTIwMCBtQWgKQ2FwYWNpdHkgKGxvdyk6CQkxMDAgbUFoCkxv dy93YXJuIGdyYW51bGFyaXR5OgkxMDAgbUFoCldhcm4vZnVsbCBncmFudWxhcml0eToJMTAwIG1B aApNb2RlbCBudW1iZXI6CQlQcmltYXJ5ClNlcmlhbCBudW1iZXI6CQkwMjQ4MCAyMDEzLzA3LzEw ClR5cGU6CQkJTElvbgpPRU0gaW5mbzoJCUhld2xldHQtUGFja2FyZApTdGF0ZToJCQloaWdoIApS ZW1haW5pbmcgY2FwYWNpdHk6CTk3JQpSZW1haW5pbmcgdGltZToJCXVua25vd24KUHJlc2VudCBy YXRlOgkJMCBtQSAoMCBtVykKUHJlc2VudCB2b2x0YWdlOgkxNjU2MyBtVgo= --20cf3010eaf58f695e0502a72bcf Content-Type: text/plain; charset=US-ASCII; name="charging-acpiconf-2-46pm.txt" Content-Disposition: attachment; filename="charging-acpiconf-2-46pm.txt" Content-Transfer-Encoding: base64 X-Attachment-Id: f_hzvek5na1 RGVzaWduIGNhcGFjaXR5Ogk0NjkwIG1BaApMYXN0IGZ1bGwgY2FwYWNpdHk6CTQ2OTAgbUFoClRl Y2hub2xvZ3k6CQlzZWNvbmRhcnkgKHJlY2hhcmdlYWJsZSkKRGVzaWduIHZvbHRhZ2U6CQkxNDQw MCBtVgpDYXBhY2l0eSAod2Fybik6CTIwMCBtQWgKQ2FwYWNpdHkgKGxvdyk6CQkxMDAgbUFoCkxv dy93YXJuIGdyYW51bGFyaXR5OgkxMDAgbUFoCldhcm4vZnVsbCBncmFudWxhcml0eToJMTAwIG1B aApNb2RlbCBudW1iZXI6CQlQcmltYXJ5ClNlcmlhbCBudW1iZXI6CQkwMjQ4MCAyMDEzLzA3LzEw ClR5cGU6CQkJTElvbgpPRU0gaW5mbzoJCUhld2xldHQtUGFja2FyZApTdGF0ZToJCQloaWdoIApS ZW1haW5pbmcgY2FwYWNpdHk6CTk3JQpSZW1haW5pbmcgdGltZToJCXVua25vd24KUHJlc2VudCBy YXRlOgkJMCBtQSAoMCBtVykKUHJlc2VudCB2b2x0YWdlOgkxNjU4NCBtVgo= --20cf3010eaf58f695e0502a72bcf Content-Type: text/plain; charset=US-ASCII; name="discharging-acpiconf-4-39pm.txt" Content-Disposition: attachment; filename="discharging-acpiconf-4-39pm.txt" Content-Transfer-Encoding: base64 X-Attachment-Id: f_hzvek9xt2 RGVzaWduIGNhcGFjaXR5Ogk0NjkwIG1BaApMYXN0IGZ1bGwgY2FwYWNpdHk6CTQ2OTAgbUFoClRl Y2hub2xvZ3k6CQlzZWNvbmRhcnkgKHJlY2hhcmdlYWJsZSkKRGVzaWduIHZvbHRhZ2U6CQkxNDQw MCBtVgpDYXBhY2l0eSAod2Fybik6CTIwMCBtQWgKQ2FwYWNpdHkgKGxvdyk6CQkxMDAgbUFoCkxv dy93YXJuIGdyYW51bGFyaXR5OgkxMDAgbUFoCldhcm4vZnVsbCBncmFudWxhcml0eToJMTAwIG1B aApNb2RlbCBudW1iZXI6CQlQcmltYXJ5ClNlcmlhbCBudW1iZXI6CQkwMjQ4MCAyMDEzLzA3LzEw ClR5cGU6CQkJTElvbgpPRU0gaW5mbzoJCUhld2xldHQtUGFja2FyZApTdGF0ZToJCQloaWdoIApS ZW1haW5pbmcgY2FwYWNpdHk6CTk3JQpSZW1haW5pbmcgdGltZToJCXVua25vd24KUHJlc2VudCBy YXRlOgkJMCBtQSAoMCBtVykKUHJlc2VudCB2b2x0YWdlOgkxNjU4NSBtVgo= --20cf3010eaf58f695e0502a72bcf Content-Type: text/plain; charset=US-ASCII; name="discharging-acpiconf-6-07pm.txt" Content-Disposition: attachment; filename="discharging-acpiconf-6-07pm.txt" Content-Transfer-Encoding: base64 X-Attachment-Id: f_hzvekg1y3 RGVzaWduIGNhcGFjaXR5Ogk0NjkwIG1BaApMYXN0IGZ1bGwgY2FwYWNpdHk6CTQ2OTAgbUFoClRl Y2hub2xvZ3k6CQlzZWNvbmRhcnkgKHJlY2hhcmdlYWJsZSkKRGVzaWduIHZvbHRhZ2U6CQkxNDQw MCBtVgpDYXBhY2l0eSAod2Fybik6CTIwMCBtQWgKQ2FwYWNpdHkgKGxvdyk6CQkxMDAgbUFoCkxv dy93YXJuIGdyYW51bGFyaXR5OgkxMDAgbUFoCldhcm4vZnVsbCBncmFudWxhcml0eToJMTAwIG1B aApNb2RlbCBudW1iZXI6CQlQcmltYXJ5ClNlcmlhbCBudW1iZXI6CQkwMjQ4MCAyMDEzLzA3LzEw ClR5cGU6CQkJTElvbgpPRU0gaW5mbzoJCUhld2xldHQtUGFja2FyZApTdGF0ZToJCQloaWdoIApS ZW1haW5pbmcgY2FwYWNpdHk6CTk3JQpSZW1haW5pbmcgdGltZToJCXVua25vd24KUHJlc2VudCBy YXRlOgkJMCBtQSAoMCBtVykKUHJlc2VudCB2b2x0YWdlOgkxNjU4NSBtVgo= --20cf3010eaf58f695e0502a72bcf Content-Type: text/plain; charset=US-ASCII; name="asl-error.txt" Content-Disposition: attachment; filename="asl-error.txt" Content-Transfer-Encoding: base64 X-Attachment-Id: f_hzvel2m44 CkludGVsIEFDUEkgQ29tcG9uZW50IEFyY2hpdGVjdHVyZQpBU0wgT3B0aW1pemluZyBDb21waWxl ciB2ZXJzaW9uIDIwMTMwODIzLTY0CkNvcHlyaWdodCAoYykgMjAwMCAtIDIwMTMgSW50ZWwgQ29y cG9yYXRpb24KCkNvbXBpbGVyIGFib3J0aW5nIGR1ZSB0byBwYXJzZXItZGV0ZWN0ZWQgc3ludGF4 IGVycm9yKHMpCmhwLTg1NzB3LmFzbCAgMjcxMDQ6ICAgICAgICAgUGFja2FnZSAoMHgwNikKRXJy b3IgICAgNjEyNiAtICAgICAgc3ludGF4IGVycm9yIF4gCgpBU0wgSW5wdXQ6ICAgICBocC04NTcw dy5hc2wgLSAyNzEyNCBsaW5lcywgODg0NTI1IGJ5dGVzLCAxMDE0OSBrZXl3b3JkcwoKQ29tcGls YXRpb24gY29tcGxldGUuIDEgRXJyb3JzLCAwIFdhcm5pbmdzLCAwIFJlbWFya3MsIDAgT3B0aW1p emF0aW9ucwoK --20cf3010eaf58f695e0502a72bcf-- From owner-freebsd-acpi@FreeBSD.ORG Wed Sep 10 00:52:49 2014 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id E2FDEDF7 for ; Wed, 10 Sep 2014 00:52:49 +0000 (UTC) Received: from mga02.intel.com (mga02.intel.com [134.134.136.20]) by mx1.freebsd.org (Postfix) with ESMTP id B893C1F0 for ; Wed, 10 Sep 2014 00:52:49 +0000 (UTC) Received: from orsmga001.jf.intel.com ([10.7.209.18]) by orsmga101.jf.intel.com with ESMTP; 09 Sep 2014 17:51:41 -0700 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.04,494,1406617200"; d="scan'208";a="570876498" Received: from orsmsx106.amr.corp.intel.com ([10.22.225.133]) by orsmga001.jf.intel.com with ESMTP; 09 Sep 2014 17:51:41 -0700 Received: from orsmsx151.amr.corp.intel.com (10.22.226.38) by ORSMSX106.amr.corp.intel.com (10.22.225.133) with Microsoft SMTP Server (TLS) id 14.3.195.1; Tue, 9 Sep 2014 17:51:41 -0700 Received: from orsmsx112.amr.corp.intel.com ([169.254.12.46]) by ORSMSX151.amr.corp.intel.com ([169.254.7.110]) with mapi id 14.03.0195.001; Tue, 9 Sep 2014 17:51:40 -0700 From: "Moore, Robert" To: nick gigashvili , Ian Smith Subject: RE: Problems with acpi (battery status not shown) Thread-Topic: Problems with acpi (battery status not shown) Thread-Index: AQHPy2T2K/Z9lhTFPEavL7RNaZC6VJv5q58A///gHdA= Date: Wed, 10 Sep 2014 00:51:40 +0000 Message-ID: <94F2FBAB4432B54E8AACC7DFDE6C92E37D1F877D@ORSMSX112.amr.corp.intel.com> References: <20140908213852.L58647@sola.nimnet.asn.au> In-Reply-To: Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-originating-ip: [10.22.254.138] Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: base64 MIME-Version: 1.0 Cc: "freebsd-acpi@freebsd.org" X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.18-1 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 10 Sep 2014 00:52:50 -0000 V2hhdCB3YXMgdXNlZCB0byBkaXNhc3NlbWJsZSB0aGUgZmlsZSBpbiB0aGUgZmlyc3QgcGxhY2U/ DQoNClBsZWFzZSBzZW5kIHRoZSBhY3BpZHVtcCBmb3IgdGhlIG1hY2hpbmUsIHRoYW5rcy4NCkJv Yg0KDQoNCj4gLS0tLS1PcmlnaW5hbCBNZXNzYWdlLS0tLS0NCj4gRnJvbTogb3duZXItZnJlZWJz ZC1hY3BpQGZyZWVic2Qub3JnIFttYWlsdG86b3duZXItZnJlZWJzZC0NCj4gYWNwaUBmcmVlYnNk Lm9yZ10gT24gQmVoYWxmIE9mIG5pY2sgZ2lnYXNodmlsaQ0KPiBTZW50OiBUdWVzZGF5LCBTZXB0 ZW1iZXIgMDksIDIwMTQgMTI6NDUgUE0NCj4gVG86IElhbiBTbWl0aA0KPiBDYzogZnJlZWJzZC1h Y3BpQGZyZWVic2Qub3JnDQo+IFN1YmplY3Q6IFJlOiBQcm9ibGVtcyB3aXRoIGFjcGkgKGJhdHRl cnkgc3RhdHVzIG5vdCBzaG93bikNCj4gDQo+IEhpIGFnYWluDQo+IA0KPiBJIGRpZCBhcyB5b3Ug c3VnZ2VzdGVkIEkgdGVzdGVkIHdpdGggYWNwaWNvbmYgd2l0aCBkaWZmZXJlbnQgdGltZXMgYW5k DQo+IGRpZmZlcmVudCBzdGF0ZXMgaGVyZSBhcmUgdGhlIHJlc3VsdHMuIGZpcnN0IHR3byBmaWxl cyBhcmUgd2hlbiBsYXB0b3Agd2FzDQo+IGNoYXJnaW5nIG9ubHkgZGlmZmVyZW5jZSBpbiB0aGVz ZSB0d28gZmlsZXMgd2FzIGluIFByZXNlbnQgdm9sdGFnZSBsYXN0DQo+IHR3byBmaWxlcyBhcmUg d2hlbiBsYXB0b3Agd2FzIGRpc2NoYXJnaW5nIHRoZXJlIGlzIG5vIGRpZmZlcmVuY2UgaW4gdGhl c2UNCj4gdHdvLiBBZnRlciBjb3VwbGUgaG91cnMgaXQgcmFuIG91dCBvZiBiYXR0ZXJ5IGFuZCBs IGFwdG9wIHdhcyBwb3dlcmVkIG9mZg0KPiB0aGVuIEkgcHV0IGl0IG9uIEFDIHBvd2VyIGFuZCB0 dXJuZWQgaXQgb24gYmF0dGVyeSB3YXMgYXQgMCUgYW5kIGNoYXJnaW5nDQo+IGFuZCBhZnRlciBz b21lIHRpbWUgaXQgaXMgc3RpbGwgYXQgMCUgYW5kIGNoYXJnaW5nDQo+IA0KPiBOb3cgcmVnYXJk aW5nIHRvIEFTTCBmaWxlIEkgcmFuIGlhc2wgbXktYXNsLmFzbCBhbmQgb24gbGluZSAyNzEwNCB0 aGVyZQ0KPiB3YXMgc3ludGF4IGVycm9yIHdpdGggIlBhY2thZ2UgICgweDA2KSIgdW5mb3J0dW5h dGVseSBJIGRvbid0dW5kZXJzdGFuZCBhDQo+IGRhbW4gdGhpbmcgd2l0aCBBU0wgc3ludGF4IC4u Lg0KPiBtYXliZSB0aGlzIHdpbGwgbWFrZSBubyBkaWZmZXJlbmNlIGJ1dCBzdGlsbCBJIHRyaWVk DQo+IA0KPiBUaGFua3MNCj4gDQo+IE9uIE1vbiwgU2VwIDgsIDIwMTQgYXQgNTowMCBQTSwgSWFu IFNtaXRoIDxzbWl0aGlAbmltbmV0LmFzbi5hdT4gd3JvdGU6DQo+IA0KPiA+IE9uIE1vbiwgOCBT ZXAgMjAxNCAxNDo0MTo0NiArMDQwMCwgbmljayBnaWdhc2h2aWxpIHdyb3RlOg0KPiA+DQo+ID4g ID4gPiBXaGVuIHJlcGx5aW5nLCBwbGVhc2UgZWRpdCB5b3VyIFN1YmplY3QgbGluZSBzbyBpdCBp cyBtb3JlDQo+ID4gc3BlY2lmaWMgID4gPiB0aGFuICJSZTogQ29udGVudHMgb2YgZnJlZWJzZC1h Y3BpIGRpZ2VzdC4uLiINCj4gPg0KPiA+IE9uZSBoYXMgdG8gYmUgcmVhbGx5IGNhcmVmdWwgcmVw bHlpbmcgdG8gZGlnZXN0czsgbm90IG9ubHkgdG8gcmVzdG9yZQ0KPiA+IHRoZSBTdWJqZWN0IGJ1 dCBhbHNvIHRvIHF1b3RlIG5vIG1vcmUgdGhhbiBuZWNlc3NhcnkgdG8gZm9sbG93IHRoZSBvbmUN Cj4gPiBtZXNzYWdlIG9yIHRvcGljLiAgV2UgYWxyZWFkeSBoYWQgeW91ciB2ZXJib3NlIGRtZXNn IGV0YyAuLg0KPiA+DQo+ID4gID4gVGhhbmtzIElhbiBmb3IgcmVzcG9uc2UgSWxsIGRvIGFzIHlv dSBzdWdnZXN0ZWQuLi4NCj4gPg0KPiA+IExldCB1cyBrbm93LiAgTXkgWDIwMCBkcm9wcGVkIGJh Y2sgdG8gOTQlIHRvZGF5IGJ1dCByZW1haW5zIHJlbGF4ZWQuDQo+ID4NCj4gPiAgPiB3aGF0IGFi b3V0IEFTTCBzeW50YXggZXJyb3Igc2hvdWxkbid0IEkgcGF5IGF0dGFudGlvbiB0byBpdCA/DQo+ ID4NCj4gPiBJIHdvdWxkbid0IGtub3csIG9ubHkgYSBsaXR0bGUgYml0IGFib3V0IGJhdHRlcmll cy4gIFlvdSBuZWVkIHRvIHNob3cNCj4gPiBleGFjdCBlcnJvciBtZXNzYWdlL3MgdG8gaW50ZXJl c3Qgc29tZW9uZSB3aG8ga25vd3Mgd2hhdCB0aG9zZSBtZWFuLg0KPiA+DQo+ID4gSSBoYWQgYSBi cmllZiBkaXZlIGludG8gYSBmZXcgc2VjdGlvbnMgb2YgeW91ciA5MjVLaUIgaHAtODU3MHcuYXNs IGFuZA0KPiA+IG1hbmFnZWQgdG8gc3VyZmFjZSBiZWZvcmUgZHJvd25pbmcgLi4gbGl0dGxlIHRo ZSB3aXNlci4NCj4gPg0KPiA+IFlvdXIgb3JpZ2luYWwgbWVzc2FnZSBiZWxvdyBmb3IgY29udGV4 dCwgd2l0aG91dCBhdHRhY2htZW50cy4NCj4gPg0KPiA+IGNoZWVycywgSWFuDQo+ID4NCj4gPiAg PiA+IE1lc3NhZ2U6IDENCj4gPiAgPiA+IERhdGU6IEZyaSwgNSBTZXAgMjAxNCAxODo0MzoyMyAr MDQwMCAgPiA+IEZyb206IG5pY2sgZ2lnYXNodmlsaQ0KPiA+IDxuaWNrYWdpZ2FzaHZpbGlAZ21h aWwuY29tPiAgPiA+IFRvOiBmcmVlYnNkLWFjcGlAZnJlZWJzZC5vcmcgID4gPg0KPiA+IFN1Ympl Y3Q6IFByb2JsZW1zIHdpdGggYWNwaSAoYmF0dGVyeSBzdGF0dXMgbm90IHNob3duKSAgPiA+DQo+ ID4gTWVzc2FnZS1JRDoNCj4gPiAgPiA+ICAgICAgICAgPENBK3hpMzliSmhobytVOVVQdWl1eGJ6 cXNGY1dIdzhaalJUNXcwdFREdWZFYUtGRjE9DQo+ID4gID4gPiB3QG1haWwuZ21haWwuY29tPg0K PiA+ICA+ID4gQ29udGVudC1UeXBlOiB0ZXh0L3BsYWluOyBjaGFyc2V0PSJ1dGYtOCINCj4gPiAg PiA+DQo+ID4gID4gPiBIaQ0KPiA+ICA+ID4NCj4gPiAgPiA+IEknbSBoYXZpbmcgcHJvYmxlbSB3 aXRoIGFjcGkgYmF0dGVyeSBzdGF0dXMgaXMgbm90IHVwZGF0ZWQgaXQgaXMNCj4gPiBmcmVlemVk IG9uICA+ID4gOTYlIHdoZW4gb24gQUMgcG93ZXIsIEknbSBydW5uaW5nIEZyZWVCU0QgMTAtUkVM RUFTRQ0KPiA+IG9uIEhQIFdvcmtzdGF0aW9uICA+ID4gODU3MHcuDQo+ID4gID4gPiBJIHRlc3Rl ZCBBU0wgd2l0aCBpYXNsIGFuZCBpdCBoYXMgc3ludGF4IGVycm9yLiBJIGNvdWx0bid0IGJvb3QN Cj4gPiB3aXRoIGFjcGkgID4gPiB0dXJuZWQgb2ZmIHNvIEltIHNlbmRpbmcgeW91IGRtZXNnIG91 dHB1dCBvbmx5IHdpdGgNCj4gPiBhY3BpIGVuYWJsZWQuDQo+ID4gID4gPg0KPiA+ICA+ID4gaGVy ZSBpcyBBU0wgZmlsZSBsaW5rOg0KPiA+ICA+ID4gaHR0cHM6Ly93d3cuc2VuZHNwYWNlLmNvbS9m aWxlL2RvNXhuNw0KPiA+ICA+ID4NCj4gPiAgPiA+IFRoYW5rIHlvdQ0KPiA+ICA+ID4gLS0tLS0t LS0tLS0tLS0gbmV4dCBwYXJ0IC0tLS0tLS0tLS0tLS0tICA+ID4gVGFibGUgJ0ZBQ1AnIGF0DQo+ ID4gMHhiZWZmYzAwMCAgPiA+IFRhYmxlICdIUEVUJyBhdCAweGJlZmZiMDAwICA+ID4gVGFibGUg J0FQSUMnIGF0DQo+ID4gMHhiZWZmYTAwMA0KPiA+DQo+ID4gWy4uXQ0KPiA+DQo= From owner-freebsd-acpi@FreeBSD.ORG Wed Sep 10 07:56:41 2014 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 54123AB1 for ; Wed, 10 Sep 2014 07:56:41 +0000 (UTC) Received: from sola.nimnet.asn.au (paqi.nimnet.asn.au [115.70.110.159]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id B753CA14 for ; Wed, 10 Sep 2014 07:56:40 +0000 (UTC) Received: from localhost (localhost [127.0.0.1]) by sola.nimnet.asn.au (8.14.2/8.14.2) with ESMTP id s8A7uUsJ062121; Wed, 10 Sep 2014 17:56:30 +1000 (EST) (envelope-from smithi@nimnet.asn.au) Date: Wed, 10 Sep 2014 17:56:30 +1000 (EST) From: Ian Smith To: "Moore, Robert" Subject: RE: Problems with acpi (battery status not shown) In-Reply-To: <94F2FBAB4432B54E8AACC7DFDE6C92E37D1F877D@ORSMSX112.amr.corp.intel.com> Message-ID: <20140910174325.E61666@sola.nimnet.asn.au> References: <20140908213852.L58647@sola.nimnet.asn.au> <94F2FBAB4432B54E8AACC7DFDE6C92E37D1F877D@ORSMSX112.amr.corp.intel.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Cc: "freebsd-acpi@freebsd.org" , nick gigashvili X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.18-1 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 10 Sep 2014 07:56:41 -0000 On Wed, 10 Sep 2014 00:51:40 +0000, Moore, Robert wrote: > What was used to disassemble the file in the first place? I gather Nick followed the standard instructions for ACPI debugging. > Please send the acpidump for the machine, thanks. > Bob At 925KiB it's a tad big to attach. From Nick's OP (with verbose dmesg and sysctl hw.acpi attached): > here is ASL file link: > https://www.sendspace.com/file/do5xn7 Horrid site, careful where you click .. >From these acpiconf readings, the problem with getting battery status is certainly real, despite battery init looking good and EC looking ok too. cheers, Ian > > -----Original Message----- > > From: owner-freebsd-acpi@freebsd.org [mailto:owner-freebsd- > > acpi@freebsd.org] On Behalf Of nick gigashvili > > Sent: Tuesday, September 09, 2014 12:45 PM > > To: Ian Smith > > Cc: freebsd-acpi@freebsd.org > > Subject: Re: Problems with acpi (battery status not shown) > > > > Hi again > > > > I did as you suggested I tested with acpiconf with different times and > > different states here are the results. first two files are when laptop was > > charging only difference in these two files was in Present voltage last > > two files are when laptop was discharging there is no difference in these > > two. After couple hours it ran out of battery and l aptop was powered off > > then I put it on AC power and turned it on battery was at 0% and charging > > and after some time it is still at 0% and charging > > > > Now regarding to ASL file I ran iasl my-asl.asl and on line 27104 there > > was syntax error with "Package (0x06)" unfortunately I don'tunderstand a > > damn thing with ASL syntax ... > > maybe this will make no difference but still I tried > > > > Thanks > > > > On Mon, Sep 8, 2014 at 5:00 PM, Ian Smith wrote: > > > > > On Mon, 8 Sep 2014 14:41:46 +0400, nick gigashvili wrote: > > > > > > > > When replying, please edit your Subject line so it is more > > > specific > > than "Re: Contents of freebsd-acpi digest..." > > > > > > One has to be really careful replying to digests; not only to restore > > > the Subject but also to quote no more than necessary to follow the one > > > message or topic. We already had your verbose dmesg etc .. > > > > > > > Thanks Ian for response Ill do as you suggested... > > > > > > Let us know. My X200 dropped back to 94% today but remains relaxed. > > > > > > > what about ASL syntax error shouldn't I pay attantion to it ? > > > > > > I wouldn't know, only a little bit about batteries. You need to show > > > exact error message/s to interest someone who knows what those mean. > > > > > > I had a brief dive into a few sections of your 925KiB hp-8570w.asl and > > > managed to surface before drowning .. little the wiser. > > > > > > Your original message below for context, without attachments. > > > > > > cheers, Ian > > > > > > > > Message: 1 > > > > > Date: Fri, 5 Sep 2014 18:43:23 +0400 > > From: nick gigashvili > > > > > To: freebsd-acpi@freebsd.org > > > > > Subject: Problems with acpi (battery status not shown) > > > > > Message-ID: > > > > > > > > > w@mail.gmail.com> > > > > > Content-Type: text/plain; charset="utf-8" > > > > > > > > > > Hi > > > > > > > > > > I'm having problem with acpi battery status is not updated it is > > > freezed on > > 96% when on AC power, I'm running FreeBSD 10-RELEASE > > > on HP Workstation > > 8570w. > > > > > I tested ASL with iasl and it has syntax error. I coultn't boot > > > with acpi > > turned off so Im sending you dmesg output only with > > > acpi enabled. > > > > > > > > > > here is ASL file link: > > > > > https://www.sendspace.com/file/do5xn7 > > > > > > > > > > Thank you > > > > > -------------- next part -------------- > > Table 'FACP' at > > > 0xbeffc000 > > Table 'HPET' at 0xbeffb000 > > Table 'APIC' at > > > 0xbeffa000 > > > > > > [..] > > > > From owner-freebsd-acpi@FreeBSD.ORG Fri Sep 12 20:15:23 2014 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 40977F58 for ; Fri, 12 Sep 2014 20:15:23 +0000 (UTC) Received: from centos5.fkeinternet.com (centos5.fkeinternet.com [216.154.215.239]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 073F6232 for ; Fri, 12 Sep 2014 20:15:22 +0000 (UTC) Received: from centos5.fkeinternet.com (localhost.localdomain [127.0.0.1]) by centos5.fkeinternet.com (8.14.4/8.14.4) with ESMTP id s8CK5pBS009696 for ; Fri, 12 Sep 2014 16:05:51 -0400 Received: (from root@localhost) by centos5.fkeinternet.com (8.14.4/8.14.4/Submit) id s8CK5pYg009695 for freebsd-acpi@freebsd.org; Fri, 12 Sep 2014 16:05:51 -0400 Date: Fri, 12 Sep 2014 16:05:51 -0400 Message-Id: <201409122005.s8CK5pYg009695@centos5.fkeinternet.com> To: freebsd-acpi@freebsd.org Original-To: freebsd-acpi@freebsd.org Reply-To: From: "Fred Koschara" Sender: blog14912@wfredk.com Subject: NASA's plans, Sept. 11, 1969, and what they mean today MIME-Version: 1.0 Content-Type: text/plain X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.18-1 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 12 Sep 2014 20:15:23 -0000 In yesterday's Space History Newsletter[1], you will find this information: Program information, NASA manned space flight after 1969 Two major directions were identified for NASA's manned space flight in the next decade on 11 September 1969. These were further exploration of the Moon, with possibly the establishment of a permanent Lunar surface base, and the continued development of manned flight in Earth orbit, leading to a permanent manned space station supported by a low-cost shuttle system. To maintain direction, the following key milestones were proposed: ... By 1990 Earth orbit space base Lunar surface base Possible Mars landing An excerpt from my commentary[2]: ... Historically, two things have led to growth of the American economy – expansion into new frontiers, and innovation – creation of new industries, and new methods for existing ones. Since there are no longer any frontiers available on the Earth, there's only one option left: Innovation is what has to drive economic growth. While there have been bursts of development such as introduction of personal computers and the whole set of industries that grew out of that innovation, and there are many fields where incremental innovation can be seen today, the whole-economy blast of innovation painted in broad strokes that led to six pairs of astronauts landing on the Moon hasn't been seen since the government-funded space program was castrated in the early 1970's. Developing a strong space exploration and development program, one that can and will achieve the kind of plans laid out in NASA's 1969 outline, will require a lot of innovation, in nearly every field of endeavor. That is how to solve the economic woes the country now finds itself mired under. ... To get the whole story, please see my blog post at http://wfredk.com/blog/2014091109/nasas-plans-sept-11-1969-and-what-they-mean-today References: 1) http://l5development.com/i_resource/history/DayInHistory.php?d=0911 2) http://wfredk.com/blog/2014091109/nasas-plans-sept-11-1969-and-what-they-mean-today http://wfredk.com/blog/?p=190 http://wfredk.com/blog ------------------------------------------------------------------------ Please feel free to forward this email to anyone you think would like to get it. If it annoys you, feel free to just delete it. If you don't ever want to hear from me again, just send me a note to that effect, and I'll add you to a list I keep of addresses I don't send email to. _____________________________________________________________________________ We are going to run out of oil. Before that happens, we MUST have a replacement source of energy and feed stock for our civilization that has become so dependent on plastic. The time to act is NOW!! Space Power Now, for humanity's survival - http://SpacePowerNow.org The L5 Development Group - Solutions in Space - http://L5Development.com For-profit space exploration and development as a private enterprise FREE space history newsletter - http://L5Development.com/SpaceHistoryNews.php For your daily dose of art, try http://PhotoByFred.com Investment quality fine art prints - http://LimitedEditionPhoto.com My personal Web page is http://wfredk.com - stop by some time!