From owner-freebsd-hardware@FreeBSD.ORG Mon Dec 15 18:35:23 2008 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 9AFC7106564A for ; Mon, 15 Dec 2008 18:35:23 +0000 (UTC) (envelope-from lothlorien@tochka.ru) Received: from smtp10.mtu.ru (smtp10.mtu.ru [62.5.255.14]) by mx1.freebsd.org (Postfix) with ESMTP id B277B8FC1F for ; Mon, 15 Dec 2008 18:35:22 +0000 (UTC) (envelope-from lothlorien@tochka.ru) Received: from smtp10.mtu.ru (localhost [127.0.0.1]) by smtp10.mtu.ru (Postfix) with ESMTP id 6DF7036D34C for ; Mon, 15 Dec 2008 21:17:00 +0300 (MSK) Received: from ABBEYROAD (ppp83-237-173-131.pppoe.mtu-net.ru [83.237.173.131]) by smtp10.mtu.ru (Postfix) with ESMTP id D272F36A974 for ; Mon, 15 Dec 2008 21:16:59 +0300 (MSK) Date: Mon, 15 Dec 2008 21:16:56 +0300 From: Gennady Kudryashoff X-Mailer: The Bat! (v2.10.03) UNREG / CD5BF9353B3B7091 X-Priority: 3 (Normal) Message-ID: <341627524.20081215211656@tochka.ru> To: freebsd-hardware@freebsd.org Resent-from: Gennady Kudryashoff MIME-Version: 1.0 Content-Type: text/plain; charset=koi8-r Content-Transfer-Encoding: 8bit Resent-Message-Id: <20081215181659.D272F36A974@smtp10.mtu.ru> Resent-Date: Mon, 15 Dec 2008 21:16:59 +0300 (MSK) X-DCC-STREAM-Metrics: smtp10.mtu.ru 10001; Body=0 Fuz1=0 Fuz2=0 Subject: FreeBSD 7.1-RC1 rl0 watchdog timeout with custom kernel X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Gennady Kudryashoff List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 15 Dec 2008 18:35:23 -0000 Hello, all! > A copy already sent to freebsd-questions. I have Asus X51RL laptop with FreeBSD 7.1-RC1 installed. There were no troubles with GENERIC kernel (both 7.0 and 7.1-RC1), but when I've compiled custom kernel, rl ethernet driver tells to the console a lot of errors: rl0: link state changed to UP rl0: watchdog timeout rl0: watchdog timeout Any mistake? >uname -a: FreeBSD asusbook.local 7.1-RC1 FreeBSD 7.1-RC1 #0: Mon Dec 15 08:40:11 MSK 2008 root@asusbook.local:/usr/obj/usr/src/sys/GENERIC i386 >pciconf -lv: rl0@pci0:8:7:0: class=0x020000 card=0x10451043 chip=0x813910ec rev=0x10 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RT8139 (A/B/C/810x/813x/C+) Fast Ethernet Adapter' class = network subclass = ethernet >dmesg from custom kernel (ASUSBOOK): Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.1-RC1 #2: Sun Dec 14 20:13:33 MSK 2008 root@asusbook.local:/usr/obj/usr/src/sys/ASUSBOOK Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Celeron(R) CPU 550 @ 2.00GHz (1995.14-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x10661 Stepping = 1 Features=0xafebfbff Features2=0xe31d AMD Features=0x20000000 AMD Features2=0x1 real memory = 2012905472 (1919 MB) avail memory = 1964134400 (1873 MB) kbd1 at kbdmux0 ath_hal: 0.10.5.6 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425, RF2417) acpi0: on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 77f00000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_ec0: port 0x62,0x66 on acpi0 acpi_asus0: Unsupported Asus laptop: X51RL pcib0: port 0xcf8-0xcff on acpi0 pci_link3: BIOS IRQ 10 for 0.19.INTD is invalid pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 vgapci0: port 0x7800-0x78ff mem 0x90000000-0x9fffffff,0xf88f0000-0xf88fffff irq 5 at device 5.0 on pci1 pcib2: at device 4.0 on pci0 pci2: on pcib2 ath0: mem 0xf89f0000-0xf89fffff irq 11 at device 0.0 on pci2 ath0: [ITHREAD] ath0: WARNING: using obsoleted if_watchdog interface ath0: Ethernet address: 00:15:af:9e:d1:34 ath0: mac 14.2 phy 7.0 radio 10.2 pcib3: at device 5.0 on pci0 pci3: on pcib3 pcib4: at device 6.0 on pci0 pci6: on pcib4 pcib5: at device 7.0 on pci0 pci7: on pcib5 atapci0: port 0xe800-0xe807,0xe400-0xe403,0xe000-0xe007,0xdc00-0xdc03,0xd800-0xd80f mem 0xfebffc00-0xfebfffff irq 3 at device 18.0 on pci0 atapci0: [ITHREAD] atapci0: AHCI Version 01.10 controller with 4 ports detected ata2: on atapci0 ata2: [ITHREAD] ata3: on atapci0 ata3: [ITHREAD] ata4: on atapci0 ata4: [ITHREAD] ata5: on atapci0 ata5: [ITHREAD] ohci0: mem 0xfebfe000-0xfebfefff irq 11 at device 19.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: on ohci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 2 ports with 2 removable, self powered ohci1: mem 0xfebfd000-0xfebfdfff irq 5 at device 19.1 on pci0 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb1: OHCI version 1.0, legacy support usb1: on ohci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 2 ports with 2 removable, self powered ohci2: mem 0xfebfc000-0xfebfcfff irq 4 at device 19.2 on pci0 ohci2: [GIANT-LOCKED] ohci2: [ITHREAD] usb2: OHCI version 1.0, legacy support usb2: on ohci2 usb2: USB revision 1.0 uhub2: on usb2 uhub2: 2 ports with 2 removable, self powered ohci3: mem 0xfebfb000-0xfebfbfff irq 5 at device 19.3 on pci0 ohci3: [GIANT-LOCKED] ohci3: [ITHREAD] usb3: OHCI version 1.0, legacy support usb3: on ohci3 usb3: USB revision 1.0 uhub3: on usb3 uhub3: 2 ports with 2 removable, self powered ohci4: mem 0xfebfa000-0xfebfafff irq 4 at device 19.4 on pci0 ohci4: [GIANT-LOCKED] ohci4: [ITHREAD] usb4: OHCI version 1.0, legacy support usb4: on ohci4 usb4: USB revision 1.0 uhub4: on usb4 uhub4: 2 ports with 2 removable, self powered ehci0: mem 0xfebff800-0xfebff8ff irq 9 at device 19.5 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb5: EHCI version 1.0 usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4 usb5: on ehci0 usb5: USB revision 2.0 uhub5: on usb5 uhub5: 10 ports with 10 removable, self powered pci0: at device 20.0 (no driver attached) atapci1: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0 ata0: on atapci1 ata0: [ITHREAD] pcm0: mem 0xfebf4000-0xfebf7fff irq 11 at device 20.2 on pci0 pcm0: [ITHREAD] isab0: at device 20.3 on pci0 isa0: on isab0 pcib6: at device 20.4 on pci0 pci8: on pcib6 cbb0: irq 5 at device 1.0 on pci8 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [ITHREAD] pci8: at device 1.1 (no driver attached) pci8: at device 1.2 (no driver attached) rl0: port 0xb800-0xb8ff mem 0xfeaff400-0xfeaff4ff irq 5 at device 7.0 on pci8 miibus0: on rl0 rlphy0: PHY 0 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:1f:c6:f1:38:ff rl0: [ITHREAD] acpi_lid0: on acpi0 acpi_button0: on acpi0 acpi_button1: on acpi0 acpi_tz0: on acpi0 acpi_acad0: on acpi0 battery0: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Synaptics Touchpad, device ID 3 cpu0: on acpi0 p4tcc0: on cpu0 acpi_asus0: Unsupported Asus laptop: X51RL pmtimer0 on isa0 orm0: at iomem 0xc0000-0xccfff pnpid ORM0000 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: parallel port not found. sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled Timecounter "TSC" frequency 1995141435 Hz quality 800 Timecounters tick every 10.000 msec acd0: DVDR at ata0-slave UDMA33 ad4: 152627MB at ata2-master SATA150 pcm0: pcm0: Trying to mount root from ufs:/dev/ad4s2a rl0: link state changed to UP rl0: watchdog timeout rl0: watchdog timeout rl0: watchdog timeout rl0: watchdog timeout rl0: watchdog timeout rl0: watchdog timeout > dmesg from GENERIC kernel: Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.1-RC1 #0: Mon Dec 15 08:40:11 MSK 2008 root@asusbook.local:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Celeron(R) CPU 550 @ 2.00GHz (1995.14-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x10661 Stepping = 1 Features=0xafebfbff Features2=0xe31d AMD Features=0x20000000 AMD Features2=0x1 real memory = 2012905472 (1919 MB) avail memory = 1959628800 (1868 MB) ACPI APIC Table: ioapic0 irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.10.5.6 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425, RF2417) acpi0: on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 77f00000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_ec0: port 0x62,0x66 on acpi0 acpi_asus0: Unsupported Asus laptop: X51RL pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 vgapci0: port 0x7800-0x78ff mem 0x90000000-0x9fffffff,0xf88f0000-0xf88fffff irq 17 at device 5.0 on pci1 pcib2: at device 4.0 on pci0 pci2: on pcib2 ath0: mem 0xf89f0000-0xf89fffff irq 16 at device 0.0 on pci2 ath0: [ITHREAD] ath0: WARNING: using obsoleted if_watchdog interface ath0: Ethernet address: 00:15:af:9e:d1:34 ath0: mac 14.2 phy 7.0 radio 10.2 pcib3: at device 5.0 on pci0 pci3: on pcib3 pcib4: at device 6.0 on pci0 pci6: on pcib4 pcib5: at device 7.0 on pci0 pci7: on pcib5 atapci0: port 0xe800-0xe807,0xe400-0xe403,0xe000-0xe007,0xdc00-0xdc03,0xd800-0xd80f mem 0xfebffc00-0xfebfffff irq 22 at device 18.0 on pci0 atapci0: [ITHREAD] atapci0: AHCI Version 01.10 controller with 4 ports detected ata2: on atapci0 ata2: [ITHREAD] ata3: on atapci0 ata3: [ITHREAD] ata4: on atapci0 ata4: [ITHREAD] ata5: on atapci0 ata5: [ITHREAD] ohci0: mem 0xfebfe000-0xfebfefff irq 16 at device 19.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: on ohci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 2 ports with 2 removable, self powered ohci1: mem 0xfebfd000-0xfebfdfff irq 17 at device 19.1 on pci0 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: on ohci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 2 ports with 2 removable, self powered ohci2: mem 0xfebfc000-0xfebfcfff irq 18 at device 19.2 on pci0 ohci2: [GIANT-LOCKED] ohci2: [ITHREAD] usb2: OHCI version 1.0, legacy support usb2: SMM does not respond, resetting usb2: on ohci2 usb2: USB revision 1.0 uhub2: on usb2 uhub2: 2 ports with 2 removable, self powered ohci3: mem 0xfebfb000-0xfebfbfff irq 17 at device 19.3 on pci0 ohci3: [GIANT-LOCKED] ohci3: [ITHREAD] usb3: OHCI version 1.0, legacy support usb3: SMM does not respond, resetting usb3: on ohci3 usb3: USB revision 1.0 uhub3: on usb3 uhub3: 2 ports with 2 removable, self powered ohci4: mem 0xfebfa000-0xfebfafff irq 18 at device 19.4 on pci0 ohci4: [GIANT-LOCKED] ohci4: [ITHREAD] usb4: OHCI version 1.0, legacy support usb4: SMM does not respond, resetting usb4: on ohci4 usb4: USB revision 1.0 uhub4: on usb4 uhub4: 2 ports with 2 removable, self powered ehci0: mem 0xfebff800-0xfebff8ff irq 19 at device 19.5 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb5: EHCI version 1.0 usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4 usb5: on ehci0 usb5: USB revision 2.0 uhub5: on usb5 uhub5: 10 ports with 10 removable, self powered pci0: at device 20.0 (no driver attached) atapci1: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0 ata0: on atapci1 ata0: [ITHREAD] pcm0: mem 0xfebf4000-0xfebf7fff irq 16 at device 20.2 on pci0 pcm0: [ITHREAD] isab0: at device 20.3 on pci0 isa0: on isab0 pcib6: at device 20.4 on pci0 pci8: on pcib6 cbb0: irq 21 at device 1.0 on pci8 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [ITHREAD] pci8: at device 1.1 (no driver attached) pci8: at device 1.2 (no driver attached) rl0: port 0xb800-0xb8ff mem 0xfeaff400-0xfeaff4ff irq 20 at device 7.0 on pci8 miibus0: on rl0 rlphy0: PHY 0 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:1f:c6:f1:38:ff rl0: [ITHREAD] acpi_lid0: on acpi0 acpi_button0: on acpi0 acpi_button1: on acpi0 acpi_tz0: on acpi0 acpi_acad0: on acpi0 battery0: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Synaptics Touchpad, device ID 3 cpu0: on acpi0 p4tcc0: on cpu0 acpi_asus0: Unsupported Asus laptop: X51RL pmtimer0 on isa0 orm0: at iomem 0xc0000-0xccfff pnpid ORM0000 on isa0 ppc0: parallel port not found. sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: on uhub2 ums0: 3 buttons and Z dir. Timecounter "TSC" frequency 1995140715 Hz quality 800 Timecounters tick every 10.000 msec acd0: DVDR at ata0-slave UDMA33 ad4: 152627MB at ata2-master SATA150 pcm0: pcm0: Trying to mount root from ufs:/dev/ad4s2a rl0: link state changed to UP custom kernel (ASUSBOOK) config: # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.474.2.15.2.1 2008/11/25 02:59:29 kensmith Exp $ cpu I486_CPU cpu I586_CPU cpu I686_CPU ident ASUSBOOK # To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" # Default places to look for devices. makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options SCHED_ULE # ULE scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking #options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options MD_ROOT # MD is a potential root device options NFSCLIENT # Network Filesystem Client options NFSSERVER # Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCLIENT options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options GEOM_PART_GPT # GUID Partition Tables. options GEOM_LABEL # Provides labelization options COMPAT_43TTY # BSD 4.3 TTY compat [KEEP THIS!] options COMPAT_FREEBSD4 # Compatible with FreeBSD4 options COMPAT_FREEBSD5 # Compatible with FreeBSD5 options COMPAT_FREEBSD6 # Compatible with FreeBSD6 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options STACK # stack(9) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options ADAPTIVE_GIANT # Giant mutex is adaptive. options STOP_NMI # Stop CPUS using NMI instead of IPI options AUDIT # Security event auditing #options KDTRACE_HOOKS # Kernel DTrace hooks # To make an SMP kernel, the next two lines are needed #options SMP # Symmetric MultiProcessor Kernel #device apic # I/O APIC # CPU frequency control device cpufreq # Bus support. device eisa device pci # Floppy drives #device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives device ataraid # ATA RAID drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID # Static device numbering # SCSI Controllers #device ahb # EISA AHA1742 family #device ahc # AHA2940 and onboard AIC7xxx devices #options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. #device ahd # AHA39320/29320 and onboard AIC79xx devices #options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. #device amd # AMD 53C974 (Tekram DC-390(T)) #device hptiop # Highpoint RocketRaid 3xxx series #device isp # Qlogic family #device ispfw # Firmware for QLogic HBAs- normally a module #device mpt # LSI-Logic MPT-Fusion #device ncr # NCR/Symbios Logic #device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') #device trm # Tekram DC395U/UW/F DC315U adapters #device adv # Advansys SCSI adapters #device adw # Advansys wide SCSI adapters #device aha # Adaptec 154x SCSI adapters #device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. #device bt # Buslogic/Mylex MultiMaster SCSI adapters #device ncv # NCR 53C500 #device nsp # Workbit Ninja SCSI-3 #device stg # TMC 18C30/18C50 # SCSI peripherals device scbus # SCSI bus (required for SCSI) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) device ses # SCSI Environmental Services (and SAF-TE) # RAID controllers interfaced to the SCSI subsystem #device amr # AMI MegaRAID #device arcmsr # Areca SATA II RAID #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID #device ciss # Compaq Smart RAID 5* #device dpt # DPT Smartcache III, IV - See NOTES for options #device hptmv # Highpoint RocketRAID 182x #device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx #device iir # Intel Integrated RAID #device ips # IBM (Adaptec) ServeRAID #device mly # Mylex AcceleRAID/eXtremeRAID #device twa # 3ware 9000 series PATA/SATA RAID # RAID controllers #device aac # Adaptec FSA RAID #device aacp # SCSI passthrough for aac (requires CAM) #device ida # Compaq Smart RAID #device mfi # LSI MegaRAID SAS #device mlx # Mylex DAC960 family #device pst # Promise Supertrak SX6000 #device twe # 3ware ATA RAID # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device kbdmux # keyboard multiplexer device vga # VGA video card driver device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc device agp # support several AGP chipsets # Power management support (see NOTES for more options) #device apm # Add suspend/resume support for the i8254. device pmtimer # PCCARD (PCMCIA) support # PCMCIA and cardbus bridge support device cbb # cardbus (yenta) bridge device pccard # PC Card (16-bit) bus device cardbus # CardBus (32-bit) bus # Serial (COM) ports device sio # 8250, 16[45]50 based serial ports device uart # Generic UART driver # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # If you've got a "dumb" serial or parallel PCI card that is # supported by the puc(4) glue driver, uncomment the following # line to enable it (connects to sio, uart and/or ppc drivers): #device puc # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (``Tulip'') #device em # Intel PRO/1000 Gigabit Ethernet Family #device igb # Intel PRO/1000 PCIE Server Gigabit Family #device ixgb # Intel PRO/10GbE Ethernet Card #device le # AMD Am7900 LANCE and Am79C9xx PCnet #device txp # 3Com 3cR990 (``Typhoon'') #device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support #device age # Attansic/Atheros L1 Gigabit Ethernet #device ale # Atheros AR8121/AR8113/AR8114 Ethernet #device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet #device bfe # Broadcom BCM440x 10/100 Ethernet #device bge # Broadcom BCM570xx Gigabit Ethernet #device dc # DEC/Intel 21143 and various workalikes #device et # Agere ET1310 10/100/Gigabit Ethernet #device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet #device lge # Level 1 LXT1001 gigabit Ethernet #device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet #device nfe # nVidia nForce MCP on-board Ethernet #device nge # NatSemi DP83820 gigabit Ethernet #device nve # nVidia nForce MCP on-board Ethernet Networking #device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le') #device re # RealTek 8139C+/8169/8169S/8110S device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet #device ste # Sundance ST201 (D-Link DFE-550TX) #device stge # Sundance/Tamarack TC9021 gigabit Ethernet #device ti # Alteon Networks Tigon I/II gigabit Ethernet #device tl # Texas Instruments ThunderLAN #device tx # SMC EtherPower II (83c170 ``EPIC'') #device vge # VIA VT612x gigabit Ethernet #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. pccard NICs included. #device cs # Crystal Semiconductor CS89x0 NIC # 'device ed' requires 'device miibus' #device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards #device ex # Intel EtherExpress Pro/10 and Pro/10+ #device ep # Etherlink III based cards #device fe # Fujitsu MB8696x based cards #device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc. #device sn # SMC's 9000 series of Ethernet chips #device xe # Xircom pccard Ethernet # Wireless NIC cards device wlan # 802.11 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_amrr # AMRR transmit rate control algorithm device wlan_scan_ap # 802.11 AP mode scanning device wlan_scan_sta # 802.11 STA mode scanning #device an # Aironet 4500/4800 802.11 wireless NICs. device ath # Atheros pci/cardbus NIC's device ath_hal # Atheros HAL (Hardware Access Layer) device ath_rate_sample # SampleRate tx rate control for ath #device awi # BayStack 660 and others #device ral # Ralink Technology RT2500 wireless NICs. #device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. #device wl # Older non 802.11 Wavelan wireless NIC. # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support device sl # Kernel SLIP device ppp # Kernel PPP device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device faith # IPv6-to-IPv4 relaying (translation) device firmware # firmware assist module # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device ehci # EHCI PCI->USB interface (USB 2.0) device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse #device ural # Ralink Technology RT2500USB wireless NICs #device rum # Ralink Technology RT2501USB wireless NICs #device urio # Diamond Rio 500 MP3 player device uscanner # Scanners # USB Serial devices device ucom # Generic com ttys device uark # Technologies ARK3116 based serial adapters device ubsa # Belkin F5U103 and compatible serial adapters device ubser # BWCT console serial adapters device uftdi # For FTDI usb serial adapters device uipaq # Some WinCE based devices device uplcom # Prolific PL-2303 serial adapters device uslcom # SI Labs CP2101/CP2102 serial adapters device uvisor # Visor and Palm devices device uvscom # USB serial support for DDI pocket's PHS # USB Ethernet, requires miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet # FireWire support #device firewire # FireWire bus code #device sbp # SCSI over FireWire (Requires scbus and da) #device fwe # Ethernet over FireWire (non-standard!) #device fwip # IP over FireWire (RFC 2734,3146) #device dcons # Dumb console driver #device dcons_crom # Configuration ROM for dcons Thank you for help. _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" __________ NOD32 3692 (20081215) Information __________ This message was checked by NOD32 antivirus system. http://www.eset.com