From owner-freebsd-mobile Sun Jan 23 5:45:29 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from zappa.demon.nl (zappa.demon.nl [195.173.232.30]) by hub.freebsd.org (Postfix) with ESMTP id 7E98414C89 for ; Sun, 23 Jan 2000 05:45:13 -0800 (PST) (envelope-from ron@zappa.demon.nl) Received: from chaos (dweezil.demon.nl [192.168.1.5]) by zappa.demon.nl (Postfix) with SMTP id 2A2825B82 for ; Sun, 23 Jan 2000 14:48:12 +0100 (CET) Message-ID: <000501bf65a7$c88b9d40$0501a8c0@demon.nl> From: "Ron Klinkien" To: Subject: 3CCFE574BT and 4.0 very sluggish...Need help Date: Sun, 23 Jan 2000 14:43:07 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2615.200 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I hope someone can give me a pointer about how I can figure out why my 3Com 3C574BT isn't working properly. I have an Compaq Presario 1246 laptop with a 3CCFE574BT pccard (5V/16Bit) fitted in the only PCCARD/CARDBUS slot this laptop has. I run 4.0 CURRENT from 22 jan 2000 It's been getting recoqnised ok, and I can give it any irq I want with the pccard.conf irq line, but its not working ok, only a few bytes get through very slowly... I have tried all irq's, they all have the same result, i'm lost... Does a vmstat -i has to show irq on pcic or ep0 after ifconfig ? Mine doesn't.. How can I get more debug info so I can see what's wrong?... OUTPUT OF boot -v: --------------------------------------------------- [first part skipped] npx0: on motherboard npx0: INT 16 interface i586_bzero() bandwidth = 236239073 bytes/sec bzero() bandwidth = 102113754 bytes/sec apm0: on motherboard apm: found APM BIOS v1.2, connected at v1.2 pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=05011106) pcib0: on motherboard found-> vendor=0x1106, dev=0x0501, revid=0x03 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base f8000000, size 26 found-> vendor=0x1106, dev=0x8501, revid=0x00 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x1106, dev=0x0686, revid=0x19 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1106, dev=0x0571, revid=0x06 class=01-01-8a, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 00001820, size 4 found-> vendor=0x1106, dev=0x3038, revid=0x0a class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=11 map[20]: type 1, range 32, base 00001800, size 5 found-> vendor=0x1106, dev=0x3057, revid=0x20 class=06-01-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x1106, dev=0x3058, revid=0x21 class=04-01-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=c, irq=11 map[10]: type 1, range 32, base 00001000, size 8 map[14]: type 1, range 32, base 00001834, size 2 map[18]: type 1, range 32, base 00001830, size 2 found-> vendor=0x11c1, dev=0x0449, revid=0x01 class=07-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base f4000000, size 8 map[14]: type 3, range 32, base 00001838, size 3 map[18]: type 1, range 32, base 00001400, size 8 found-> vendor=0x104c, dev=0xac1e, revid=0x00 class=06-07-00, hdrtype=0x02, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=0 pci0: on pcib0 pcib1: at device 1.0 on pci0 found-> vendor=0x1023, dev=0x8420, revid=0x5c class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base f5000000, size 23 map[14]: type 1, range 32, base f4100000, size 17 map[18]: type 1, range 32, base f4800000, size 23 pci1: on pcib1 vga-pci0: mem 0xf4800000-0xf4ffffff,0xf4100000-0xf411ffff,0xf5000000-0xf57fffff irq 9 at device 0.0 on pci1 isab0: at device 7.0 on pci0 isa0: on isab0 ata-pci0: port 0x1820-0x182f at device 7.1 on pci0 ata-pci0: Busmastering DMA supported ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1820 ata0: mask=03 status0=50 status1=00 ata0: mask=03 status0=50 status1=00 ata0: devices = 0x1 ata0 at 0x01f0 irq 14 on ata-pci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1828 ata1: mask=03 status0=50 status1=00 ata1: mask=03 status0=00 status1=00 ata1: devices = 0x4 ata1 at 0x0170 irq 15 on ata-pci0 pci0: VIA 83C572 USB controller (vendor=0x1106, dev=0x3038) at 7.2 irq 11 isab1: at device 7.4 on pci0 chip1: port 0x1830-0x1833,0x1834-0x1837,0x1000-0x10ff irq 11 at device 7.5 on pci0 pci0: unknown card (vendor=0x11c1, dev=0x0449) at 9.0 irq 9 chip2: irq 0 at device 10.0 on pci0 Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata-isa0: already registered as ata0 ata-isa1: already registered as ata1 atkbdc0: at port 0x60-0x6f on isa0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 00 00 64 psm: status 00 03 64 psm: status 00 03 64 psm: status 10 00 64 psm: data 08 00 00 psm: status 00 02 64 psm: data 08 00 00 psm: status 00 02 64 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 vga0: at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x700ff fb0: port:0x3b0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 6b 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 30 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 6b 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 30 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) pcic: management irq 10 pcic0: at port 0x3e0 iomem 0xd0000 irq 10 on isa0 pccard0: on pcic0 pccard1: on pcic0 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: not probed (disabled) sio2: not probed (disabled) sio3: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: EPP SPP ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode lpt0: on ppbus0 lpt0: Interrupt-driven port isa_probe_children: probing PnP devices BIOS Geometries: 0:022def3f 0..557=558 cylinders, 0..239=240 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: ppp0 attached new masks: bio 4008c040, tty 40031092, net 40071092 bpf: lo0 attached ata0-master: success setting up UDMA2 mode on VIA chip ad0: piomode=4 dmamode=2 udmamode=2 cblid=0 ad0: ATA-4 disk at ata0 as master ad0: 4126MB (8452080 sectors), 8944 cyls, 15 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, UDMA33 Creating DISK ad0 Creating DISK wd0 ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1 ata1-master: success setting up UDMA2 mode on VIA chip acd0: CDROM drive at ata1 as master acd0: read 4134KB/s (4134KB/s), 128KB buffer, UDMA33 acd0: Reads: CD-R, CD-RW, CD-DA stream acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked Mounting root from ufs:/dev/ad0s3a pccard: card inserted, slot 0 pccard: card inserted, slot 1 ad0s1: type 0xb, start 63, end = 2676239, size 2676177 : OK ad0s2: type 0x5, start 2676240, end = 5352479, size 2676240 : OK ad0s3: type 0xa5, start 5352480, end = 8452079, size 3099600 : OK ad0s5: type 0xb, start 2676303, end = 5352479, size 2676177 : OK start_init: trying /sbin/init ep0: Pass 1 of 2 detection failed (nonfatal) ep0: <3Com 3C574B, Megahertz 3CCFE574BT or Fast Etherlink 3C574-TX> at port 0x300-0x31f irq 11 slot 0 on pccard0 ep0: Ethernet address 00:50:04:f2:fd:59 bpf: ep0 attached OUTPUT OF pccardc dumpcis:------------------------------------------- Configuration data for card in slot 0 Tuple #1, code = 0x1 (Common memory descriptor), length = 2 000: 00 ff Common memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = reserved, 32 units Tuple #2, code = 0x17 (Attribute memory descriptor), length = 3 000: 43 02 ff Attribute memory device information: Device number 1, type EEPROM, WPS = OFF Speed = 150nS, Memory block size = 8Kb, 1 units Tuple #3, code = 0x20 (Manufacturer ID), length = 4 000: 01 01 74 05 PCMCIA ID = 0x101, OEM ID = 0x574 Tuple #4, code = 0x21 (Functional ID), length = 2 000: 06 00 Network/LAN adapter Tuple #5, code = 0x15 (Version 1 info), length = 29 000: 04 01 33 43 6f 6d 00 4d 65 67 61 68 65 72 74 7a 010: 20 35 37 34 42 00 42 00 30 30 31 00 ff Version = 4.1, Manuf = [3Com],card vers = [Megahertz 574B] Addit. info = [B],[001] Tuple #6, code = 0x1a (Configuration map), length = 6 000: 02 03 00 00 01 03 Reg len = 3, config register addr = 0x10000, last config = 0x3 Registers: XX------ Tuple #7, code = 0x1b (Configuration entry), length = 15 000: c1 01 1d 71 55 35 55 54 e0 72 5d 65 30 ff ff Config index = 0x1(default) Interface byte = 0x1 (I/O) Vcc pwr: Nominal operating supply voltage: 5 x 1V Max current average over 1 second: 3 x 10mA Max current average over 10 ms: 5 x 10mA Power down supply current: 5 x 1mA Wait scale Speed = 7.0 x 100 ns RDY/BSY scale Speed = 7.0 x 100 ns Card decodes 18 address lines, full 8/16 Bit I/O IRQ modes: Level, Pulse IRQs: IOCK 1 4 5 6 8 10 11 12 14 Tuple #8, code = 0x19 (JEDEC descr for attribute memory), length = 3 000: 00 00 ff Tuple #9, code = 0x14 (No link), length = 0 Tuple #10, code = 0x10 (Checksum), length = 5 000: ae ff 5b 00 00 Checksum from offset -82, length 91, value is 0x0 Tuple #11, code = 0xff (Terminator), length = 113 000: 5b 19 03 00 00 ff 14 00 10 05 9d ff 6c 00 00 ff 010: 7a ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 020: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 030: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 040: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 050: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 060: ff ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 070: 00 Configuration data for card in slot 1 Tuple #1, code = 0xff (Terminator), length = 0 2 slots found MY rc.conf: ------------------------------------------------------- # This file now contains just the overrides from /etc/defaults/rc.conf # please make all changes to this file. hostname="chaos.demon.nl" moused_enable="NO" apm_enable="YES" pccard_enable="YES" pccard_conf="/etc/pccard.conf" pccard_ifconfig="inet 192.168.1.3 netmask 255.255.255.224" MY pccard.conf (relevant part) ----------------------------------- # Generally available IO ports io 0x240-0x360 # Generally available IRQs (Built-in sound-card owners remove 5) irq 11 13 15 # Available memory slots memory 0xd4000 96k # 3Com Megahertz 574B card "3Com" "Megahertz 574B" config 0x1 "ep0" ? 0x1 insert logger -t pccard:$device -s 3Com Megahertz 574B inserted insert /etc/pccard_ether $device remove logger -t pccard:$device -s 3Com Megahertz 574B removed remove /sbin/ifconfig $device delete ifconfig -a: ----------------------------------------------------------- ppp0: flags=8010 mtu 1500 lo0: flags=8049 mtu 16384 inet 127.0.0.1 netmask 0xff000000 ep0: flags=8943 mtu 1500 inet 192.168.1.3 netmask 0xffffffe0 broadcast 192.168.1.31 ether 00:50:04:f2:fd:59 vmstat -i : ------------------------------------------------------------ interrupt total rate ata-pci0 irq14 1330 3 ata-pci0 irq15 4 0 fdc0 irq6 1 0 atkbd0 irq1 696 1 clk irq0 41774 99 Total 43805 104 PING to my router connected 10Mb/UTP : ------------------------------------ PING 192.168.1.1 (192.168.1.1): 56 data bytes --- 192.168.1.1 ping statistics --- 11 packets transmitted, 0 packets received, 100% packet loss PING 192.168.1.1 (192.168.1.1): 56 data bytes TCPDUMP local ------------------------------------------------------------ 64 bytes from 192.168.1.1: icmp_seq=0 ttl=255 time=65647.386 ms 64 bytes from 192.168.1.1: icmp_seq=1 ttl=255 time=64646.904 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=255 time=63636.911 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=255 time=62626.905 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=255 time=61616.900 ms 64 bytes from 192.168.1.1: icmp_seq=5 ttl=255 time=60606.890 ms 64 bytes from 192.168.1.1: icmp_seq=6 ttl=255 time=59596.888 ms 64 bytes from 192.168.1.1: icmp_seq=7 ttl=255 time=58586.883 ms 64 bytes from 192.168.1.1: icmp_seq=8 ttl=255 time=57576.879 ms etc... MY KERNEL CONFIG : ------------------------------------------------------ # # CHAOS -- Compaq Presario 1246 Laptop # # $FreeBSD: src/sys/i386/conf/PLUTO,v 1.000 2000/01/21 20:40:58 ronk Exp $ machine i386 cpu I586_CPU ident CHAOS maxusers 16 options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores device isa0 device pci0 # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata2 device atadisk0 # ATA disk drives device atapicd0 # ATAPI CDROM drives options ATA_STATIC_ID #Static device numbering options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 device psm0 at atkbdc? irq 12 device vga0 at isa? port ? conflicts # splash screen/screen saver pseudo-device splash options VESA # syscons is the default console driver, resembling an SCO console device sc0 at isa? # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? flags 0x20 # Advanced Power Management # PCCARD (PCMCIA) support device card0 device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000 device pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000 disable # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? disable port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? port? irq 7 device ppbus0 # Parallel port bus (required) device lpt0 at ppbus? # Printer device ep0 pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device bpf #Berkeley packet filter TRACEROUTE: ----------------------------------------------------- 1 LANmodem (192.168.1.1) 1062.919 ms 1999.537 ms 2000.017 ms Ping doens't return anything within 8 seconds, telnet responce is quicker, but still slow... Please help... Regards, Ron. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message