From owner-freebsd-mobile Thu Apr 26 4:38: 5 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from moo.sysabend.org (moo.sysabend.org [63.86.88.201]) by hub.freebsd.org (Postfix) with ESMTP id 0312C37B424 for ; Thu, 26 Apr 2001 04:38:00 -0700 (PDT) (envelope-from ragnar@sysabend.org) Received: by moo.sysabend.org (Postfix, from userid 1004) id DD71E7589; Thu, 26 Apr 2001 04:41:48 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by moo.sysabend.org (Postfix) with ESMTP id D9FD91D95 for ; Thu, 26 Apr 2001 04:41:48 -0700 (PDT) Date: Thu, 26 Apr 2001 04:41:48 -0700 (PDT) From: Jamie Bowden To: mobile@FreeBSD.org Subject: Latitude C800 Message-ID: Approved: yep X-representing: Only myself. X-badge: We don't need no stinking badges. X-obligatory-profanity: Fuck X-moo: Moo. MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I recently replaced my Latitude CPx with a C800. Everything is working save two things: 1) The IEEE 1394 (FireWire) port, which I didn't expect would. 2) Sound. The sound card is the Maestro3 (as opposed to the CPx's Maestro 2e). Any date on when support for this chipset will be available? Quick Hardware overview and dmesg output for those interested: P3/850, 256MB RAM, ATI Rage Mobility M 32MB (up to 64) graphics, 15" LCD that can do 1500x1040 at at least 75hz, fixed CDROM (CDRW available), two bays on the front as well, one is battery only, the other is battery or peripheral, sound is Maestro 3, and there's a 1395 port as well. The rest of the hardware is easily gleaned from the dmesg out. Overall it's a very nice machine. For ethernet and modem I'm using the Intel Pro/100 PC Card and Zoom 56k PC Card I used in the CPx. Here's the dmesg: Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.2-RELEASE #1: Wed Apr 25 20:12:03 EDT 2001 jamie@ghast:/usr/src/sys/compile/ghast Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (848.15-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383f9ff real memory = 268353536 (262064K bytes) avail memory = 257802240 (251760K bytes) Preloaded elf kernel "kernel" at 0xc0314000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc031409c. module_register_init: MOD_LOAD (vesa, c0226780, 0) error 6 Pentium Pro MTRR support enabled apm0: on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at 0.0 irq 11 pcib2: at device 30.0 on pci0 pci2: on pcib2 pci2: (vendor=0x125d, dev=0x1998) at 3.0 irq 5 chip1: irq 11 at device 15.0 o n pci2 chip2: irq 11 at device 15.1 o n pci2 pci2: (vendor=0x104c, dev=0x8027) at 15.2 irq 11 isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0xbfa0-0xbfaf at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 uhci0: port 0xdce0-0xdcff irq 11 at device 31.2 on pci0 uhci0: (New UHCI DeviceId=0x24428086) usb0: on uhci0 usb0: USB revision 1.0 uhub0: (0x24428086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: on isa0 sc0: VGA <8 virtual consoles, flags=0x200> fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A joy0 at port 0x201 on isa0 pcic0: at port 0x3e0-0x3e1 irq 10 on isa0 pcic0: management irq 10 pccard0: on pcic0 pccard1: on pcic0 ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold lpt0: on ppbus0 lpt0: Interrupt-driven port ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable ad0: 19077MB [38760/16/63] at ata0-master BIOSDMA acd0: CDROM at ata0-slave using PIO4 Mounting root from ufs:/dev/ad0s2a pccard: card inserted, slot 0 pccard: card inserted, slot 1 xe0 at port 0x240-0x24f iomem 0xd0000-0xd0fff irq 9 slot 0 on pccard0 xe0: Intel CE3, bonding version 0x45, 100Mbps capable xe0: DingoID = 0x444b, RevisionID = 0x1, VendorID = 0 xe0: Ethernet address 00:a0:c9:bc:3e:b4 sio1 at port 0x3e8-0x3ef irq 3 slot 1 on pccard1 sio1: type 16550A All my old CPx bay modules (DVD, LS-120, Zip 100, Floppy) fit no problem and work as expected. Yes, I'm still running 4.2-R as ftp2 does not yet have the 4.3-R tree or ISO. Jamie Bowden -- "It was half way to Rivendell when the drugs began to take hold" Hunter S Tolkien "Fear and Loathing in Barad Dur" Iain Bowen To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message