From owner-freebsd-questions Wed Feb 21 17:32: 3 2001 Delivered-To: freebsd-questions@freebsd.org Received: from scaup.prod.itd.earthlink.net (scaup.prod.itd.earthlink.net [207.217.121.49]) by hub.freebsd.org (Postfix) with ESMTP id A86B937B491; Wed, 21 Feb 2001 17:31:57 -0800 (PST) (envelope-from ifetch@cs.du.edu) Received: from oak.ivanfetch.tzo.com (dialup-64.156.38.6.Denver1.Level3.net [64.156.38.6]) by scaup.prod.itd.earthlink.net (EL-8_9_3_3/8.9.3) with ESMTP id RAA28851; Wed, 21 Feb 2001 17:31:55 -0800 (PST) Date: Wed, 21 Feb 2001 18:32:05 -0700 (MST) From: Ivan Fetch X-Sender: ifetch@oak.ivanfetch.tzo.com To: freebsd-hardware@freebsd.org, freebsd-questions@freebsd.org Subject: Difficulty with Dell DSA Raid Controller Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello, i am hoping someone can shed some light on difficulties I am having with a Dell DSA Raid controller: The system is a Dell PowerEdge XE5133-2 (dual Pentium 133 processors, 128 Mb RAM, Dell DSA raid controller with three 4 Gb ultra SCSI hard drives, an NCR SCSI controller attached to a CD-ROM and tape drive). I would like to get FreeBSD 4.2-release installed on this machine, so I used the EISA Configuration Utility to turn on AHA154x emulation mode for the DSA controller. FreeBSD picks up the AHA controller now, but no drives show up as attached to this controller (the NCR controller is picked up too and the CD-ROM and tape drive show up). I tried variations of `aha emulation for all devices' (seems like the most likely to work), aha emulation for pas through devices only (also changing the three drives to pass through in the DSA manager software), and AHA emulation for all devices (while still leaving the three hard drives as pass through drives). Dell suggested connecting each drive to another controller and formating the drive to get rid of the raid signatures, but this sounsd like a stabb in the dark to me . I am very interested how this controller works under FreeBSD, whether you can still use raid configurations under AHA154x emulation (Dell says no but I've found evidence on the web - FreeBSD - which says yes), and why does the AHA controller show up but no disks!? I appreciate any help offered, Ivan. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message