From owner-freebsd-stable Sun Oct 13 6:10:59 2002 Delivered-To: freebsd-stable@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 3A94C37B401 for ; Sun, 13 Oct 2002 06:10:51 -0700 (PDT) Received: from bunrab.catwhisker.org (adsl-63-193-123-122.dsl.snfc21.pacbell.net [63.193.123.122]) by mx1.FreeBSD.org (Postfix) with ESMTP id D1C3543E91 for ; Sun, 13 Oct 2002 06:10:49 -0700 (PDT) (envelope-from david@catwhisker.org) Received: from bunrab.catwhisker.org (localhost [127.0.0.1]) by bunrab.catwhisker.org (8.12.6/8.12.6) with ESMTP id g9DDAnOp023914 for ; Sun, 13 Oct 2002 06:10:49 -0700 (PDT) (envelope-from david@bunrab.catwhisker.org) Received: (from david@localhost) by bunrab.catwhisker.org (8.12.6/8.12.6/Submit) id g9DDAnG1023913 for stable@freebsd.org; Sun, 13 Oct 2002 06:10:49 -0700 (PDT) (envelope-from david) Date: Sun, 13 Oct 2002 06:10:49 -0700 (PDT) From: David Wolfskill Message-Id: <200210131310.g9DDAnG1023913@bunrab.catwhisker.org> To: stable@freebsd.org Subject: panic trying to boot today's -STABLE Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is on my 2x876 MHz PIII build machine. Updated sources: freebeast(4.7-S)[6] tail /var/log/cvsup-history.log CVSup ended from cvsup14.freebsd.org at Thu Oct 10 03:56:28 PDT 2002 CVSup begin from cvsup14.freebsd.org at Fri Oct 11 03:47:02 PDT 2002 CVSup begin from cvsup13.freebsd.org at Fri Oct 11 03:47:05 PDT 2002 CVSup ended from cvsup13.freebsd.org at Fri Oct 11 03:57:41 PDT 2002 CVSup begin from cvsup14.freebsd.org at Sat Oct 12 03:47:03 PDT 2002 CVSup begin from cvsup13.freebsd.org at Sat Oct 12 03:47:06 PDT 2002 CVSup ended from cvsup13.freebsd.org at Sat Oct 12 03:55:58 PDT 2002 CVSup begin from cvsup14.freebsd.org at Sun Oct 13 03:47:02 PDT 2002 CVSup begin from cvsup13.freebsd.org at Sun Oct 13 03:47:06 PDT 2002 CVSup ended from cvsup13.freebsd.org at Sun Oct 13 03:55:30 PDT 2002 Build process was uneventful; on reboot, I see (cut/pasted from serial console; verbose boot is my default): Type '?' for a list of commands, 'help' for more detailed help. ok boot -s SMAP type=01 base=00000000 00000000 len=00000000 0009fc00 SMAP type=01 base=00000000 0009fc00 len=00000000 00000400 SMAP type=02 base=00000000 000f0000 len=00000000 00010000 SMAP type=02 base=00000000 fec00000 len=00000000 01400000 SMAP type=01 base=00000000 00100000 len=00000000 1fef0000 SMAP type=03 base=00000000 1fff3000 len=00000000 0000d000 SMAP type=04 base=00000000 1fff0000 len=00000000 00003000 Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.7-STABLE #338: Sun Oct 13 05:21:59 PDT 2002 root@freebeast.catwhisker.org:/common/S1/obj/usr/src/sys/FREEBEAST Calibrating clock(s) ... TSC clock: 876473534 Hz, i8254 clock: 1193293 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium III/Pentium III Xeon/Celeron (876.40-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x383fbff real memory = 536805376 (524224K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x0041a000 - 0x1ffe7fff, 532471808 bytes (129998 pages) kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 avail memory = 518299648 (506152K bytes) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 SMP: CPU0 apic_initialize(): lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00178011, at 0xfec00000 bios32: Found BIOS32 Service Directory header at 0xc00faf20 bios32: Entry = 0xfb390 (c00fb390) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xb3c0 pnpbios: Found PnP BIOS data at 0xc00fbde0 pnpbios: Entry = f0000:be10 Rev = 1.0 Other BIOS signatures found: ACPI: 000f6750 Preloaded elf kernel "kernel" at 0xc03f0000. Preloaded elf module "snd_cmi.ko" at 0xc03f00a8. Preloaded elf module "snd_pcm.ko" at 0xc03f0148. Pentium Pro MTRR support enabled Creating DISK md0 md0: Malloc disk SMP: CPU0 bsp_apic_configure(): lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000010 SVR: 0x000001ff pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=30911106) Using $PIR table, 8 entries at 0xc00fde30 apm0: on motherboard apm0: found APM BIOS v1.2, connected at v1.2 npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard found-> vendor=0x1106, dev=0x3091, revid=0x01 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base d9000000, size 23 found-> vendor=0x1106, dev=0xb091, revid=0x00 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 IOAPIC #0 intpin 11 -> irq 2 Freeing (NOT implemented) redirected PCI irq 11. found-> vendor=0x10ec, dev=0x8129, revid=0x00 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=2 map[10]: type 1, range 32, base 0000c000, size 7 map[14]: type 1, range 32, base d9800000, size 7 IOAPIC #0 intpin 12 -> irq 5 Freeing (NOT implemented) redirected PCI irq 12. found-> vendor=0x13f6, dev=0x0111, revid=0x10 class=04-01-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[10]: type 1, range 32, base 0000c400, size 8 found-> vendor=0x1095, dev=0x0649, revid=0x02 class=01-04-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[10]: type 1, range 32, base 0000c800, size 3 map[14]: type 1, range 32, base 0000cc00, size 2 map[18]: type 1, range 32, base 0000d000, size 3 map[1c]: type 1, range 32, base 0000d400, size 2 map[20]: type 1, range 32, base 0000d800, size 4 found-> vendor=0x1106, dev=0x3074, revid=0x00 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1106, dev=0x0571, revid=0x06 class=01-01-8a, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000dc00, size 4 pci0: on pcib0 pcib1: at device 1.0 on pci0 found-> vendor=0x5333, dev=0x8a13, revid=0x02 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base d0000000, size 26 pci1: on pcib1 pci1: (vendor=0x5333, dev=0x8a13) at 0.0 rl0: port 0xc000-0xc07f mem 0xd9800000-0xd980007f irq 2 at device 9.0 on pci0 rl0: Ethernet address: 00:80:c6:f9:08:58 miibus0: on rl0 rlphy0: on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: rl0 attached pcm0: port 0xc400-0xc4ff irq 5 at device 14.0 on pci0 pcm0: sndbuf_setmap 1000, 4000; 0xd5d46000 -> 1000 pcm0: sndbuf_setmap 5000, 4000; 0xd5d4a000 -> 5000 atapci0: port 0xd800-0xd80f,0xd400-0xd403,0xd000-0xd007,0xcc00-0xcc03,0xc800-0xc807 irq 10 at device 15.0 on pci0 ata-: ata2 exists, using next available unit number ata2: iobase=0xc800 altiobase=0xcc02 bmaddr=0xd800 ata2: mask=03 ostat0=7f ostat2=7f ata2-master: ATAPI 7f 7f ata2-slave: ATAPI 7f 7f ata2: mask=03 stat0=7f stat1=7f ata2-master: ATA 7f 7f ata2-slave: ATA 7f 7f ata2: devices=00 ata2: at 0xc800 on atapci0 ata3: iobase=0xd000 altiobase=0xd402 bmaddr=0xd808 ata3: mask=03 ostat0=7f ostat2=7f ata3-master: ATAPI 7f 7f ata3-slave: ATAPI 7f 7f ata3: mask=03 stat0=7f stat1=7f ata3-master: ATA 7f 7f ata3-slave: ATA 7f 7f ata3: devices=00 ata3: at 0xd000 on atapci0 using shared irq10. isab0: at device 17.0 on pci0 isa0: on isab0 atapci1: port 0xdc00-0xdc0f at device 17.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xdc00 ata0: mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: mask=03 stat0=50 stat1=00 ata0-master: ATA 01 a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci1 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xdc08 ata1: mask=03 ostat0=50 ostat2=01 ata1-master: ATAPI 14 eb ata1-slave: ATAPI 00 00 ata1: mask=03 stat0=00 stat1=00 ata1-slave: ATA 04 a5 ata1: devices=06 ata1: at 0x170 irq 15 on atapci1 ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: