From owner-freebsd-hardware@FreeBSD.ORG Tue Nov 1 05:49:27 2005 Return-Path: X-Original-To: freebsd-hardware@freebsd.org Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1622E16A41F for ; Tue, 1 Nov 2005 05:49:27 +0000 (GMT) (envelope-from markir@paradise.net.nz) Received: from linda-2.paradise.net.nz (bm-2a.paradise.net.nz [203.96.152.181]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2A67043D46 for ; Tue, 1 Nov 2005 05:49:22 +0000 (GMT) (envelope-from markir@paradise.net.nz) Received: from smtp-2.paradise.net.nz (tclsnelbe2-src-nat-1 [203.96.152.177]) by linda-2.paradise.net.nz (Paradise.net.nz) with ESMTP id <0IP900AO3HHKZL@linda-2.paradise.net.nz> for freebsd-hardware@freebsd.org; Tue, 01 Nov 2005 18:48:56 +1300 (NZDT) Received: from [192.168.1.11] (218-101-28-144.dsl.clear.net.nz [218.101.28.144]) by smtp-2.paradise.net.nz (Postfix) with ESMTP id 36976669868; Tue, 01 Nov 2005 18:48:55 +1300 (NZDT) Date: Tue, 01 Nov 2005 18:48:52 +1300 From: Mark Kirkwood In-reply-to: <4366AD8B.5060209@paradise.net.nz> To: Mark Kirkwood Message-id: <436701C4.90604@paradise.net.nz> MIME-version: 1.0 Content-type: multipart/mixed; boundary=------------070504020409080208060308 X-Accept-Language: en-us, en User-Agent: Mozilla Thunderbird 1.0.6 (X11/20050726) References: <43659B35.4090905@paradise.net.nz> <4366AD8B.5060209@paradise.net.nz> Cc: freebsd-hardware@freebsd.org Subject: Re: Cannot install 6.0-RC1 on Promise SX4060 (DANGER WILL ROBINSON) X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 01 Nov 2005 05:49:27 -0000 This is a multi-part message in MIME format. --------------070504020409080208060308 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Mark Kirkwood wrote: > Mark Kirkwood wrote: > >> Hi, I am trying to install 6.0-RC1 on a system with a Promise SX4060 >> (PDC20621) + 4 Maxtor ATA-133 drives (6E040L0). The mobo is a Tyan >> Thunder LE (S2510). >> >> The card appears to be detected ok (tho the exact text rushes past >> before I can read it completely), but the drive probing fails completely: >> >> ad4 : FAILURE - SET FEATURES TRANSFER MODE timed out. >> ad4 : FAILURE - SET FEATURES RCACHE timed out. >> ad4 : FAILURE - SET FEATURES WCACHE timed out. >> ad4 : FAILURE - SET FEATURES SET_MULTI. >> ad4 : FAILURE - READ timed out (LBA = 80293185) >> ad4 : FAILURE - READ retrying (0 retries left) LBA = 0 >> .. >> ad4 : req = 0xc3b78960 SET FEATURES SET TRANSFER MODE semaphore >> timeout !!DANGER WILL ROBINSON!! >> .. >> .. >> (hand copied as I don't have a serial console) >> >> > > Some more info - running the PCI bus at 33Mhz (default is 66Mhz) makes > no difference. > Ok, in order to provide dmesg and pciconv, I booted the machine with the TX2000 and the SX4060 - however with disks plugged into the TX2000 only. It boots ok in this case, and so I can provide at least this basic info: --------------070504020409080208060308 Content-Type: text/plain; name="dmesg.verbose" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.verbose" Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-RC1 #0: Tue Nov 1 18:10:17 NZDT 2005 postgres@istral.markir.net:/usr/obj/usr/src/sys/STANDARD Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a41000. Calibrating clock(s) ... i8254 clock: 1193022 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 996845780 Hz CPU: Intel Pentium III (996.85-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x387fbff real memory = 2147483648 (2048 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c28000 - 0x000000007dbc7fff, 2096758784 bytes (511904 pages) avail memory = 2096537600 (1999 MB) MP Configuration Table version 1.4 found at 0xc00f0db0 APIC: Using the MPTable enumerator. SMP: Added CPU 0 (BSP) SMP: Added CPU 1 (AP) MPTable: APIC ID: physical 0, logical 0:0 APIC ID: physical 1, logical 0:1 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00fdb90 bios32: Entry = 0xfdba0 (c00fdba0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xdbc1 pnpbios: Found PnP BIOS data at 0xc00f4c60 pnpbios: Entry = f0000:3964 Rev = 1.0 Other BIOS signatures found: ioapic0: Assuming intbase of 0 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: intpin 0 -> ExtINT (edge, high) ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) ioapic1: Assuming intbase of 16 ioapic1: intpin 0 -> PCI IRQ 16 (level, low) ioapic1: intpin 1 -> PCI IRQ 17 (level, low) ioapic1: intpin 2 -> PCI IRQ 18 (level, low) ioapic1: intpin 3 -> PCI IRQ 19 (level, low) ioapic1: intpin 4 -> PCI IRQ 20 (level, low) ioapic1: intpin 5 -> PCI IRQ 21 (level, low) ioapic1: intpin 6 -> PCI IRQ 22 (level, low) ioapic1: intpin 7 -> PCI IRQ 23 (level, low) ioapic1: intpin 8 -> PCI IRQ 24 (level, low) ioapic1: intpin 9 -> PCI IRQ 25 (level, low) ioapic1: intpin 10 -> PCI IRQ 26 (level, low) ioapic1: intpin 11 -> PCI IRQ 27 (level, low) ioapic1: intpin 12 -> PCI IRQ 28 (level, low) ioapic1: intpin 13 -> PCI IRQ 29 (level, low) ioapic1: intpin 14 -> PCI IRQ 30 (level, low) ioapic1: intpin 15 -> PCI IRQ 31 (level, low) ioapic1: intpin 6 bus PCI ioapic1: intpin 6 trigger: level ioapic1: intpin 6 polarity: low ioapic1: intpin 11 bus PCI ioapic1: intpin 11 trigger: level ioapic1: intpin 11 polarity: low ioapic1: intpin 4 bus PCI ioapic1: intpin 4 trigger: level ioapic1: intpin 4 polarity: low ioapic1: intpin 5 bus PCI ioapic1: intpin 5 trigger: level ioapic1: intpin 5 polarity: low ioapic0: intpin 10 bus PCI ioapic0: intpin 10 trigger: level ioapic0: intpin 10 polarity: low ioapic1: intpin 7 bus PCI ioapic1: intpin 7 trigger: level ioapic1: intpin 7 polarity: low ioapic0: intpin 1 bus ISA ioapic0: intpin 1 trigger: edge ioapic0: intpin 1 polarity: high ioapic0: intpin 2 bus ISA ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: high ioapic0: intpin 3 bus ISA ioapic0: intpin 3 trigger: edge ioapic0: intpin 3 polarity: high ioapic0: intpin 4 bus ISA ioapic0: intpin 4 trigger: edge ioapic0: intpin 4 polarity: high ioapic0: intpin 6 bus ISA ioapic0: intpin 6 trigger: edge ioapic0: intpin 6 polarity: high ioapic0: intpin 8 bus ISA ioapic0: intpin 8 trigger: edge ioapic0: intpin 8 polarity: high ioapic0: intpin 12 bus ISA ioapic0: intpin 12 trigger: edge ioapic0: intpin 12 polarity: high ioapic0: intpin 13 bus ISA ioapic0: intpin 13 trigger: edge ioapic0: intpin 13 polarity: high ioapic0: intpin 14 bus ISA ioapic0: intpin 14 trigger: edge ioapic0: intpin 14 polarity: high ioapic0: intpin 15 bus ISA ioapic0: intpin 15 trigger: edge ioapic0: intpin 15 polarity: high lapic: Routing ExtINT -> LINT0 lapic: LINT0 trigger: edge lapic: LINT0 polarity: high lapic: Routing NMI -> LINT1 lapic: LINT1 trigger: edge lapic: LINT1 polarity: high ioapic0 irqs 0-15 on motherboard ioapic1 irqs 16-31 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00040011 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00000000 err: 0x0001000f pcm: 0x00010000 wlan: <802.11 Link Layer> null: random: nfslock: pseudo-device io: mem: Pentium Pro MTRR support enabled npx0: [FAST] npx0: on motherboard npx0: INT 16 interface cpu0 on motherboard cpu1 on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x80000070 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00091166) pcibios: BIOS version 2.10 Found $PIR table, 10 entries at 0xc00f51d0 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 15 A 0x01 10 embedded 0 4 A 0x14 3 4 5 7 9 10 11 12 14 15 embedded 0 5 A 0x15 3 4 5 7 9 10 11 12 14 15 embedded 0 1 A 0x16 3 4 5 7 9 10 11 12 14 15 embedded 0 3 A 0x1f 3 4 5 7 9 10 11 12 14 15 embedded 1 6 A 0x1d 3 4 5 7 9 10 11 12 14 15 embedded 1 6 B 0x1c 3 4 5 7 9 10 11 12 14 15 slot 1 1 2 A 0x1b 3 4 5 7 9 10 11 12 14 15 slot 1 1 2 B 0x1e 3 4 5 7 9 10 11 12 14 15 slot 1 1 2 C 0x1d 3 4 5 7 9 10 11 12 14 15 slot 1 1 2 D 0x1c 3 4 5 7 9 10 11 12 14 15 slot 2 1 3 A 0x17 3 4 5 7 9 10 11 12 14 15 slot 2 1 3 B 0x18 3 4 5 7 9 10 11 12 14 15 slot 2 1 3 C 0x19 3 4 5 7 9 10 11 12 14 15 slot 2 1 3 D 0x1a 3 4 5 7 9 10 11 12 14 15 slot 3 1 4 A 0x1e 3 4 5 7 9 10 11 12 14 15 slot 3 1 4 B 0x1d 3 4 5 7 9 10 11 12 14 15 slot 3 1 4 C 0x1c 3 4 5 7 9 10 11 12 14 15 slot 3 1 4 D 0x1b 3 4 5 7 9 10 11 12 14 15 slot 4 1 5 A 0x1d 3 4 5 7 9 10 11 12 14 15 slot 4 1 5 B 0x1c 3 4 5 7 9 10 11 12 14 15 slot 4 1 5 C 0x1b 3 4 5 7 9 10 11 12 14 15 slot 4 1 5 D 0x1e 3 4 5 7 9 10 11 12 14 15 pcib0: pcibus 0 on motherboard pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x1166, dev=0x0009, revid=0x06 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x2200, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0009, revid=0x06 bus=0, slot=0, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0200, cachelnsz=8 (dwords) lattimer=0x10 (480 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x4752, revid=0x27 bus=0, slot=1, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base fc000000, size 24, enabled map[14]: type 4, range 32, base 0000d800, size 8, enabled map[18]: type 1, range 32, base fdaff000, size 12, enabled pcib0: slot 1 INTA routed to irq 22 found-> vendor=0x8086, dev=0x1229, revid=0x08 bus=0, slot=4, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base fdafe000, size 12, enabled map[14]: type 4, range 32, base 0000d400, size 6, enabled map[18]: type 1, range 32, base fd900000, size 20, enabled pcib0: slot 4 INTA routed to irq 20 found-> vendor=0x8086, dev=0x1229, revid=0x08 bus=0, slot=5, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base fdafd000, size 12, enabled map[14]: type 4, range 32, base 0000d000, size 6, enabled map[18]: type 1, range 32, base fd700000, size 20, enabled pcib0: slot 5 INTA routed to irq 21 found-> vendor=0x1166, dev=0x0200, revid=0x50 bus=0, slot=15, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[90]: type 4, range 32, base 00000580, size 4, enabled found-> vendor=0x1166, dev=0x0211, revid=0x00 bus=0, slot=15, func=1 class=01-01-8a, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000ffa0, size 4, enabled found-> vendor=0x1166, dev=0x0220, revid=0x04 bus=0, slot=15, func=2 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=a, irq=10 map[10]: type 1, range 32, base fdafc000, size 12, enabled pcib0: slot 15 INTA routed to irq 10 pci0: at device 1.0 (no driver attached) fxp0: port 0xd400-0xd43f mem 0xfdafe000-0xfdafefff,0xfd900000-0xfd9fffff irq 20 at device 4.0 on pci0 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfdafe000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 1229 8086 100c 0008 fxp0: Dynamic Standby mode is disabled miibus0: on fxp0 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp0: Ethernet address: 00:e0:81:20:00:0c fxp0: [MPSAFE] fxp1: port 0xd000-0xd03f mem 0xfdafd000-0xfdafdfff,0xfd700000-0xfd7fffff irq 21 at device 5.0 on pci0 fxp1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfdafd000 fxp1: using memory space register mapping fxp1: PCI IDs: 8086 1229 8086 100c 0008 fxp1: Dynamic Standby mode is disabled miibus1: on fxp1 inphy1: on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: bpf attached fxp1: Ethernet address: 00:e0:81:20:00:0d fxp1: [MPSAFE] isab0: port 0x580-0x58f at device 15.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 15.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=60 ostat1=70 ata0: stat0=0x20 err=0x20 lsb=0x20 msb=0x20 ata0: stat1=0x30 err=0x30 lsb=0x30 msb=0x30 ata0: reset tp2 stat0=20 stat1=30 devices=0x0 ata0: [MPSAFE] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x00 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=00 devices=0x4 ata1: [MPSAFE] ohci0: mem 0xfdafc000-0xfdafcfff irq 10 at device 15.2 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfdafc000 ohci0: (New OHCI DeviceId=0x02201166) ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: on ohci0 usb0: USB revision 1.0 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered pcib1: pcibus 1 on motherboard pci1: on pcib1 pci1: physical bus=1 found-> vendor=0x105a, dev=0x6269, revid=0x02 bus=1, slot=2, func=0 class=01-04-85, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0430, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x12 (4500 ns) intpin=a, irq=10 powerspec 1 supports D0 D1 D3 current D0 map[10]: type 4, range 32, base 0000efe0, size 3, enabled map[14]: type 4, range 32, base 0000efac, size 2, enabled map[18]: type 4, range 32, base 0000efa0, size 3, enabled map[1c]: type 4, range 32, base 0000efa8, size 2, enabled map[20]: type 4, range 32, base 0000ef90, size 4, enabled map[24]: type 1, range 32, base febf0000, size 16, enabled pcib1: slot 2 INTA routed to irq 27 found-> vendor=0x105a, dev=0x6621, revid=0x01 bus=1, slot=3, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x06 (1500 ns), maxlat=0x12 (4500 ns) intpin=a, irq=7 powerspec 1 supports D0 D1 D3 current D0 map[10]: type 4, range 32, base 0000e800, size 8, enabled map[14]: type 4, range 32, base 0000e400, size 8, enabled map[18]: type 4, range 32, base 0000e000, size 8, enabled map[1c]: type 1, range 32, base fea00000, size 20, enabled map[20]: type 1, range 32, base febd8000, size 15, enabled pcib1: slot 3 INTA routed to irq 23 atapci1: port 0xefe0-0xefe7,0xefac-0xefaf,0xefa0-0xefa7,0xefa8-0xefab,0xef90-0xef9f mem 0xfebf0000-0xfebfffff irq 27 at device 2.0 on pci1 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xef90 atapci1: [MPSAFE] ata2: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xefe0 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xefac ata2: reset tp1 mask=03 ostat0=50 ostat1=00 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1 ata2: [MPSAFE] ata3: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xefa0 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xefa8 ata3: reset tp1 mask=03 ostat0=50 ostat1=00 ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=50 stat1=00 devices=0x1 ata3: [MPSAFE] atapci2: port 0xe800-0xe8ff,0xe400-0xe4ff,0xe000-0xe0ff mem 0xfea00000-0xfeafffff,0xfebd8000-0xfebdffff irq 23 at device 3.0 on pci1 atapci2: rid 0x20 is memory, requested 4 atapci2: Reserved 0x8000 bytes for rid 0x20 type 3 at 0xfebd8000 atapci2: Reserved 0x100000 bytes for rid 0x1c type 3 at 0xfea00000 atapci2: [MPSAFE] atapci2: DIMM size 1024MB @ 0x00000000 ata4: on atapci2 ata4: reset tp1 mask=03 ostat0=60 ostat1=70 ata4: stat0=0x20 err=0x20 lsb=0x20 msb=0x20 ata4: stat1=0x30 err=0x30 lsb=0x30 msb=0x30 ata4: reset tp2 stat0=20 stat1=30 devices=0x0 ata4: [MPSAFE] ata5: on atapci2 ata5: reset tp1 mask=03 ostat0=60 ostat1=70 ata5: stat0=0x20 err=0x20 lsb=0x20 msb=0x20 ata5: stat1=0x30 err=0x30 lsb=0x30 msb=0x30 ata5: reset tp2 stat0=20 stat1=30 devices=0x0 ata5: [MPSAFE] ata6: on atapci2 ata6: reset tp1 mask=03 ostat0=60 ostat1=70 ata6: stat0=0x20 err=0x20 lsb=0x20 msb=0x20 ata6: stat1=0x30 err=0x30 lsb=0x30 msb=0x30 ata6: reset tp2 stat0=20 stat1=30 devices=0x0 ata6: [MPSAFE] ata7: on atapci2 ata7: reset tp1 mask=03 ostat0=60 ostat1=70 ata7: stat0=0x20 err=0x20 lsb=0x20 msb=0x20 ata7: stat1=0x30 err=0x30 lsb=0x30 msb=0x30 ata7: reset tp2 stat0=20 stat1=30 devices=0x0 ata7: [MPSAFE] ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete pnpbios: 14 devices, largest 234 bytes PNP0c01: adding fixed memory32 range 0-0x9fbff, size=0x9fc00 PNP0c01: adding fixed memory32 range 0x9fc00-0x9ffff, size=0x400 PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=0x20000 PNP0c01: adding fixed memory32 range 0x100000-0x7fffffff, size=0x7ff00000 PNP0c01: adding fixed memory32 range 0xfec00000-0xfec00fff, size=0x1000 PNP0c01: adding fixed memory32 range 0xfec01000-0xfec01fff, size=0x1000 PNP0c01: adding fixed memory32 range 0xfee00000-0xfee00fff, size=0x1000 PNP0c01: adding fixed memory32 range 0xfff80000-0xffffffff, size=0x80000 pnpbios: handle 0 device ID PNP0c01 (010cd041) PNP0200: adding dma mask 0x10 PNP0200: adding io range 0-0xf, size=0x10, align=0x1 PNP0200: adding io range 0x80-0x90, size=0x11, align=0x1 PNP0200: adding io range 0x94-0x9f, size=0xc, align=0x1 PNP0200: adding io range 0xc0-0xde, size=0x1f, align=0x1 pnpbios: handle 2 device ID PNP0200 (0002d041) PNP0100: adding irq mask 0x1 PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1 pnpbios: handle 3 device ID PNP0100 (0001d041) PNP0b00: adding irq mask 0x100 PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1 pnpbios: handle 4 device ID PNP0b00 (000bd041) PNP0303: adding irq mask 0x2 PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1 PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1 pnpbios: handle 5 device ID PNP0303 (0303d041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 pnpbios: handle 6 device ID PNP0800 (0008d041) PNP0c04: adding irq mask 0x2000 PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 pnpbios: handle 7 device ID PNP0c04 (040cd041) PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1 PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1 PNP0c02: adding io range 0x10-0x1f, size=0x10, align=0x1 PNP0c02: adding io range 0x40b-0x40b, size=0x1, align=0x1 PNP0c02: adding io range 0x4d6-0x4d6, size=0x1, align=0x1 PNP0c02: adding io range 0xc00-0xc01, size=0x2, align=0x1 PNP0c02: adding io range 0xc14-0xc14, size=0x1, align=0x1 PNP0c02: adding io range 0xc49-0xc4a, size=0x2, align=0x1 PNP0c02: adding io range 0xc52-0xc52, size=0x1, align=0x1 PNP0c02: adding io range 0xc6c-0xc6c, size=0x1, align=0x1 PNP0c02: adding io range 0xc6f-0xc6f, size=0x1, align=0x1 PNP0c02: adding io range 0xcd6-0xcd7, size=0x2, align=0x1 PNP0c02: adding io range 0xf50-0xf58, size=0x9, align=0x1 PNP0c02: adding io range 0x374-0x375, size=0x2, align=0x1 PNP0c02: adding io range 0x377-0x377, size=0x1, align=0x1 PNP0c02: adding fixed memory32 range 0xd3800-0xdffff, size=0xc800 pnpbios: handle 8 device ID PNP0c02 (020cd041) PNP0c02: adding io range 0x580-0x58f, size=0x10, align=0x1 PNP0c02: adding io range 0x500-0x51f, size=0x20, align=0x1 pnpbios: handle 9 device ID PNP0c02 (020cd041) pnpbios: handle 10 device ID PNP0a03 (030ad041) PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8 PNP0501: adding irq mask 0x10 pnpbios: handle 11 device ID PNP0501 (0105d041) PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0x8 PNP0501: adding irq mask 0x8 pnpbios: handle 12 device ID PNP0501 (0105d041) PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x1 PNP0700: adding irq mask 0x40 PNP0700: adding dma mask 0x4 pnpbios: handle 13 device ID PNP0700 (0007d041) unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: at iomem 0xc0000-0xc7fff,0xc8000-0xd17ff,0xd1800-0xd27ff,0xd2800-0xd37ff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0065 psm0: failed to reset the aux device. bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0: ic_type 90 part_id 80 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: ic_type 90 part_id 80 fdc0: [MPSAFE] fdc0: [FAST] fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) ppc0: parallel port not found. ppc0: failed to probe at irq 7 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x8041 0x8051 0x8041 0x8041 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x8041 0x8049 0x8041 0x8041 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices unknown: can't assign resources (memory) unknown: at iomem 0-0x9fbff,0x9fc00-0x9ffff,0xe0000-0xfffff,0x100000-0x7fffffff,0xfec00000-0xfec00fff,0xfec01000-0xfec01fff,0xfee00000-0xfee00fff on isa0 unknown: can't assign resources (port) unknown: at port 0x60 on isa0 unknown: failed to probe at port 0x61 on isa0 unknown: can't assign resources (port) unknown: at port 0x580-0x58f on isa0 unknown: can't assign resources (port) unknown: at port 0x3f8-0x3ff on isa0 unknown: can't assign resources (port) unknown: at port 0x2f8-0x2ff on isa0 unknown: can't assign resources (port) unknown: at port 0x3f0-0x3f5 on isa0 Device configuration finished. Reducing kern.maxvnodes 134371 -> 100000 procfs registered lapic: Divisor 2, Frequency 66456452 hz Timecounter "TSC" frequency 996845780 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout ata1-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire acd0: setting PIO4 on ServerWorks ROSB4 chip acd0: CDRW drive at ata1 as master acd0: read 5511KB/s (5511KB/s) write 1377KB/s (1377KB/s), 2048KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: CDR, CDRW, test write acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=80 wire ad4: setting PIO4 on Promise PDC20271 chip ad4: setting UDMA133 on Promise PDC20271 chip ad4: 39205MB at ata2-master UDMA133 ad4: 80293248 sectors [79656C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad4 ********* ATA Promise FastTrak Metadata ********* promise_id dummy_0 0x00020000 magic_0 0x0100000001d90812 magic_1 0x1031 magic_2 0x00000c57 integrity 0x00000080 80 flags 0x07 7 disk_number 0 channel 0x00 device 0x00 magic_0 0x0100000001d90812 disk_offset 4294967295 disk_sectors 80293185 rebuild_lba 0xffffffff generation 0x0002 status 0x0f f type RAID0 total_disks 2 stripe_shift 7 array_width 2 array_number 0 total_sectors 160586240 cylinders 9995 heads 254 sectors 63 magic_1 0x0000000009531101 DISK# flags dummy_0 channel device magic_0 0 7 0x00 0x00 0x00 0x0100000001d90812 1 7 0x00 0x01 0x00 0x0000000001d90812 2 0 0x00 0x00 0x00 0x0000000000000000 3 0 0x00 0x00 0x00 0x0000000000000000 4 0 0x00 0x00 0x00 0x0000000000000000 5 0 0x00 0x00 0x00 0x0000000000000000 6 0 0x00 0x00 0x00 0x0000000000000000 7 0 0x00 0x00 0x00 0x0000000000000000 checksum 0x7429f4e7 ================================================= ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=80 wire ad6: setting PIO4 on Promise PDC20271 chip ad6: setting UDMA133 on Promise PDC20271 chip ad6: 39205MB at ata3-master UDMA133 ad6: 80293248 sectors [79656C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad6 ********* ATA Promise FastTrak Metadata ********* promise_id dummy_0 0x00020000 magic_0 0x0000000001d90812 magic_1 0x1031 magic_2 0x00000c57 integrity 0x00000080 80 flags 0x07 7 disk_number 1 channel 0x01 device 0x00 magic_0 0x0000000001d90812 disk_offset 4294967295 disk_sectors 80293185 rebuild_lba 0xffffffff generation 0x0002 status 0x0f f type RAID0 total_disks 2 stripe_shift 7 array_width 2 array_number 0 total_sectors 160586240 cylinders 9995 heads 254 sectors 63 magic_1 0x0000000009531101 DISK# flags dummy_0 channel device magic_0 0 7 0x00 0x00 0x00 0x0100000001d90812 1 7 0x00 0x01 0x00 0x0000000001d90812 2 0 0x00 0x00 0x00 0x0000000000000000 3 0 0x00 0x00 0x00 0x0000000000000000 4 0 0x00 0x00 0x00 0x0000000000000000 5 0 0x00 0x00 0x00 0x0000000000000000 6 0 0x00 0x00 0x00 0x0000000000000000 7 0 0x00 0x00 0x00 0x0000000000000000 checksum 0x722af5e7 ================================================= ATA PseudoRAID loaded ********** ATA PseudoRAID ar0 Metadata ********** ================================================= format Promise Fasttrak type RAID0 flags 0x01 1 magic_0 0x0000000000000000 magic_1 0x0000000009531101 generation 2 total_sectors 160586240 offset_sectors 0 heads 255 sectors 63 cylinders 9996 width 2 interleave 128 total_disks 2 disk 0: flags = 0x0b b ad4: sectors 80293185 disk 1: flags = 0x0b b ad6: sectors 80293185 ================================================= ar0: 78411MB status: READY ar0: 160586240 sectors [9996C/255H/63S] <> subdisks defined as: ar0: disk0 READY using ad4 at ata2-master ar0: disk1 READY using ad6 at ata3-master SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00040011 LDR: 0x02000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000 ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0 ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0 ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0 ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0 ioapic0: routing intpin 10 (PCI IRQ 10) to cluster 0 ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0 ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0 ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0 ioapic1: routing intpin 4 (PCI IRQ 20) to cluster 0 ioapic1: routing intpin 5 (PCI IRQ 21) to cluster 0 ioapic1: routing intpin 7 (PCI IRQ 23) to cluster 0 ioapic1: routing intpin 11 (PCI IRQ 27) to cluster 0 GEOM: new disk ar0 Trying to mount root from ufs:/dev/ar0s1a start_init: trying /sbin/init fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout --------------070504020409080208060308 Content-Type: text/plain; name="pciconf.verbose" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="pciconf.verbose" hostb0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x00091166 rev=0x06 hdr=0x00 vendor = 'ServerWorks (Was: Reliance Computer Corp)' device = 'NB6536 (CNB20-LE) AGP interface' class = bridge subclass = HOST-PCI hostb1@pci0:0:1: class=0x060000 card=0x00000000 chip=0x00091166 rev=0x06 hdr=0x00 vendor = 'ServerWorks (Was: Reliance Computer Corp)' device = 'NB6536 (CNB20-LE) AGP interface' class = bridge subclass = HOST-PCI none0@pci0:1:0: class=0x030000 card=0x00081002 chip=0x47521002 rev=0x27 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'Rage XL PCI' class = display subclass = VGA fxp0@pci0:4:0: class=0x020000 card=0x100c8086 chip=0x12298086 rev=0x08 hdr=0x00 vendor = 'Intel Corporation' device = '82550/1/7/8/9 EtherExpress PRO/100(B) Ethernet Adapter' class = network subclass = ethernet fxp1@pci0:5:0: class=0x020000 card=0x100c8086 chip=0x12298086 rev=0x08 hdr=0x00 vendor = 'Intel Corporation' device = '82550/1/7/8/9 EtherExpress PRO/100(B) Ethernet Adapter' class = network subclass = ethernet isab0@pci0:15:0: class=0x060100 card=0x02001166 chip=0x02001166 rev=0x50 hdr=0x00 vendor = 'ServerWorks (Was: Reliance Computer Corp)' device = 'OSB4 PCI to ISA Bridge' class = bridge subclass = PCI-ISA atapci0@pci0:15:1: class=0x01018a card=0x00000000 chip=0x02111166 rev=0x00 hdr=0x00 vendor = 'ServerWorks (Was: Reliance Computer Corp)' device = 'OSB4 PCI EIDE Controller' class = mass storage subclass = ATA ohci0@pci0:15:2: class=0x0c0310 card=0x02201166 chip=0x02201166 rev=0x04 hdr=0x00 vendor = 'ServerWorks (Was: Reliance Computer Corp)' device = 'OSB4 OpenHCI Compliant USB Controller' class = serial bus subclass = USB atapci1@pci1:2:0: class=0x010485 card=0x4d68105a chip=0x6269105a rev=0x02 hdr=0x00 vendor = 'Promise Technology Inc' device = 'PDC20271 FastTrak TX2000 EIDE controller' class = mass storage subclass = RAID atapci2@pci1:3:0: class=0x010400 card=0x6621105a chip=0x6621105a rev=0x01 hdr=0x00 vendor = 'Promise Technology Inc' device = 'PDC 20621(?) FastTrak SX4000' class = mass storage subclass = RAID --------------070504020409080208060308--