From owner-freebsd-questions Sun Jan 10 20:51:17 1999 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id UAA01968 for freebsd-questions-outgoing; Sun, 10 Jan 1999 20:51:17 -0800 (PST) (envelope-from owner-freebsd-questions@FreeBSD.ORG) Received: from presley.cybertrails.com (presley.cybertrails.com [162.42.150.35]) by hub.freebsd.org (8.8.8/8.8.8) with SMTP id UAA01960 for ; Sun, 10 Jan 1999 20:51:12 -0800 (PST) (envelope-from kf7nn1@cybertrails.com) Received: (qmail 13351 invoked from network); 11 Jan 1999 04:48:12 -0000 Received: from unknown (HELO cybertrails.com) (162.42.132.4) by presley.cybertrails.com with SMTP; 11 Jan 1999 04:48:12 -0000 Message-ID: <36998325.7DC88FBF@cybertrails.com> Date: Sun, 10 Jan 1999 21:50:45 -0700 From: George Vagner X-Mailer: Mozilla 4.06 [en] (Win98; U) MIME-Version: 1.0 To: larry_nilsen CC: "freebsd-questions@FreeBSD.ORG" Subject: Re: ppp "Not" References: <368AAFC2.7ABE6254@eee.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG for one thing i see is your modem is on com 1, so do you have a mouse on com1 too or are you using a ps/2 type? if your using a ps/2 type then you must have an external modem plugged in to the com1 port. another thing i see is your trying to use 38400 bps and sometimes that is not a good choice for speed, try 57600 or 19200 if u have an external modem, if you have an internal modem on com1 like it shows make sure that com1 is disabled in the bios or else you have 2 devices mapped at the same address and irq. I would suggest using an external modem if your not, that way you avoid irq and i/o port conflicts. larry_nilsen wrote: > > Hi My FreeBSD Box still not Connected here is what i have > ppp Version 1.7-$Date:1998/07/06 02:07:29 $ > pppON>show hdlc > HDLC level errors > FCS:0 ADDR: 0 COMMAND:0 PROTO:0 > pppON>show log > log:Carrier CCP Chat Command Connect IPCP LCP Phase > Tun Warning Error ALERT > Local:Warning Error Alert > pppON> show route > Destination Gateway Flags Netif > 127.0.0.1 127.0.0.1 UH lo0 > pppON>show stopped > stopped Timer: LCP:Disabled, IPCP: Disabled, CCP: Disabled > pppON> show modem > device:/dev/cuaa0 speed:38400 > cs8, noparity, CTS/RTS on > connect Count :2 > out q:387 > Dial Script= Abort Busy Abort etc..... etc.... > login Script= > Phone Numbers(s)= xxx-xxxx > Connect Time :1554 secs > 0 octets in 0 octets out > Overall 0 bytes /sec > > When I Start ppp This is What I See > pppON Circle> term > Working in interactive mode > Entering terminal mode > Type ~? for help > [] <----- I get no response from ~? or AT nothing happens > so ive tried +++(enter) ATE1(enter) simultaneously and still no OK! > response I just cant get my Modem to echo back to me.Could it be that > I have a mis-configured modem and if so how do i configure it.And > also ive been told i might have some setup problems with my modem > if it looks like it from the info- ive put here .How can i remedy this? > > I hope this information helps to Remedy my ppp Thankyou.... > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message