From owner-freebsd-current Mon May 27 21: 4: 2 2002 Delivered-To: freebsd-current@freebsd.org Received: from ns.altadena.net (ns.altadena.net [206.126.144.2]) by hub.freebsd.org (Postfix) with ESMTP id 2157137B405 for ; Mon, 27 May 2002 21:03:47 -0700 (PDT) Received: (from pete@localhost) by ns.altadena.net (8.11.6/8.11.6) id g4S43fK10487 for current@freebsd.org; Mon, 27 May 2002 21:03:41 -0700 (PDT) (envelope-from pete) From: Pete Carah Message-Id: <200205280403.g4S43fK10487@ns.altadena.net> Subject: Display controller problem To: current@freebsd.org Date: Mon, 27 May 2002 21:03:41 -0700 (PDT) X-Mailer: ELM [version 2.4ME+ PL68 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=iso8859-1 Content-Transfer-Encoding: 7bit Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This may relate to the X-window reboots - my machine shows that too, if I boot without acpi; with acpi X never gets going. Supermicro P3TDDE, 2x1ghz P3: Via Apollo Pro 266 or 266T chipset, generic Nvidia TNT2 display. (there is a conflict in the manual which says 266T but 8633 north bridge). I also have a UP system, also with a via chipset (Asus KT266, with Athlon 1.2g) which doesn't show this problem (but I don't have X configured on it). dmesg (with boot_verbose) ------------------------------------------------------------------- Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #4: Mon May 27 18:13:07 PDT 2002 pete@gooney.altadena.net:/usr/obj/usr/src/sys/GOONEY Preloaded elf kernel "/boot/kernel/kernel" at 0xc043c000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc043c0a8. Calibrating clock(s) ... TSC clock: 999389884 Hz, i8254 clock: 1193027 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium III/Pentium III Xeon/Celeron (999.53-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x383fbff real memory = 536805376 (524224K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x00466000 - 0x1ffe7fff, 532160512 bytes (129922 pages) avail memory = 517410816 (505284K bytes) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 SMP: CPU0 apic_initialize(): lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00178011, at 0xfec00000 bios32: Found BIOS32 Service Directory header at 0xc00faf10 bios32: Entry = 0xfb380 (c00fb380) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xb3b0 pnpbios: Found PnP BIOS data at 0xc00fbe00 pnpbios: Entry = f0000:be30 Rev = 1.0 Other BIOS signatures found: random: mem: Pentium Pro MTRR support enabled null: SMP: CPU0 bsp_apic_configure(): lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000010 SVR: 0x000001ff pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=30911106) Using $PIR table, 8 entries at 0xc00fdc20 npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard acpi0: power button is handled as a fixed feature programming model. ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 Timecounter "ACPI-fast" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 acpi_cpu0: on acpi0 acpi_cpu1: on acpi0 acpi_tz0: on acpi0 acpi_button0: on acpi0 acpi_pcib0: port 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0 pci0: physical bus=0 map[10]: type 3, range 32, base f0000000, size 26, enabled found-> vendor=0x1106, dev=0x3091, revid=0x01 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 powerspec 2 supports D0 D3 current D0 found-> vendor=0x1106, dev=0xb091, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 IOAPIC #0 intpin 11 -> irq 2 Freeing (NOT implemented) redirected PCI irq 11. map[10]: type 4, range 32, base 0000c000, size 3, enabled map[14]: type 4, range 32, base 0000c400, size 2, enabled map[18]: type 4, range 32, base 0000c800, size 3, enabled map[1c]: type 4, range 32, base 0000cc00, size 2, enabled map[20]: type 4, range 32, base 0000d000, size 6, enabled map[24]: type 1, range 32, base f9100000, size 17, enabled found-> vendor=0x105a, dev=0x4d30, revid=0x02 bus=0, slot=12, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 intpin=a, irq=2 powerspec 1 supports D0 D3 current D0 map[10]: type 1, range 32, base f9120000, size 12, enabled map[14]: type 4, range 32, base 0000d400, size 6, enabled map[18]: type 1, range 32, base f9000000, size 20, enabled found-> vendor=0x8086, dev=0x1229, revid=0x08 bus=0, slot=13, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 found-> vendor=0x1106, dev=0x3074, revid=0x00 bus=0, slot=17, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000d800, size 4, enabled found-> vendor=0x1106, dev=0x0571, revid=0x06 bus=0, slot=17, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000dc00, size 5, enabled found-> vendor=0x1106, dev=0x3038, revid=0x1b bus=0, slot=17, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 intpin=d, irq=5 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000e000, size 5, enabled found-> vendor=0x1106, dev=0x3038, revid=0x1b bus=0, slot=17, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 intpin=d, irq=5 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000e400, size 5, enabled found-> vendor=0x1106, dev=0x3038, revid=0x1b bus=0, slot=17, func=4 class=0c-03-00, hdrtype=0x00, mfdev=0 intpin=d, irq=5 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000e800, size 8, enabled map[14]: type 1, range 32, base f9121000, size 8, enabled found-> vendor=0x1106, dev=0x3065, revid=0x62 bus=0, slot=18, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 pci0: on acpi_pcib0 agp0: mem 0xf0000000-0xf3ffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 256M pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xf6000000-0xf7ffffff pcib1: prefetched decode 0xf4000000-0xf5ffffff pci1: physical bus=1 map[10]: type 1, range 32, base f6000000, size 24, enabled map[14]: type 3, range 32, base f4000000, size 25, enabled found-> vendor=0x10de, dev=0x002d, revid=0x15 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=10 powerspec 1 supports D0 D3 current D0 pci1: on pcib1 pci1: at device 0.0 (no driver attached) atapci0: port 0xd000-0xd03f,0xcc00-0xcc03,0xc800-0xc807,0xc400-0xc403,0xc000-0xc007 mem 0xf9100000-0xf911ffff irq 2 at device 12.0 on pci0 ata2: iobase=0xc000 altiobase=0xc402 bmaddr=0xd000 ata2: mask=03 ostat0=00 ostat2=00 ata2-master: ATAPI 00 00 ata2-slave: ATAPI 00 00 ata2: mask=03 stat0=00 stat1=00 ata2: devices=00 ata2: at 0xc000 on atapci0 ata3: iobase=0xc800 altiobase=0xcc02 bmaddr=0xd008 ata3: mask=03 ostat0=00 ostat2=00 ata3-master: ATAPI 00 00 ata3-slave: ATAPI 00 00 ata3: mask=03 stat0=00 stat1=00 ata3: devices=00 ata3: at 0xc800 on atapci0 fxp0: port 0xd400-0xd43f mem 0xf9000000-0xf90fffff,0xf9120000-0xf9120fff irq 5 at device 13.0 on pci0 fxp0: using memory space register mapping fxp0: Ethernet address 00:30:48:41:14:66 fxp0: PCI IDs: 8086 1229 8086 000c 0008 fxp0: Dynamic Standby mode is disabled inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: fxp0 attached isab0: at device 17.0 on pci0 isa0: on isab0 atapci1: port 0xd800-0xd80f at device 17.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xd800 ata0: mask=03 ostat0=50 ostat2=50 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: mask=03 stat0=50 stat1=50 ata0-master: ATA 01 a5 ata0-slave: ATA 01 a5 ata0: devices=03 ata0: at 0x1f0 irq 14 on atapci1 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xd808 ata1: mask=02 ostat0=ff ostat2=50 ata1-slave: ATAPI 14 eb ata1: mask=02 stat0=00 stat1=00 ata1: devices=08 ata1: at 0x170 irq 15 on atapci1 uhci0: port 0xdc00-0xdc1f irq 5 at device 17.2 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xe000-0xe01f irq 5 at device 17.3 on pci0 usb1: on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xe400-0xe41f irq 5 at device 17.4 on pci0 usb2: on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: at device 18.0 (no driver attached) fdc0: port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: EPP SPP ppc0 port 0x778-0x77b,0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode plip0: on ppbus0 bpf: lp0 attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 vpo0: can't connect to the drive imm0: (disconnect) s1=0x38 s2=0x38, s3=0x38 imm0: (connect) s1=0x38 s2=0x38, s3=0x38 imm0: (connect) s1=0x38 s2=0x38, s3=0x38 unknown: not probed (disabled) psmcpnp0 irq 12 on acpi0 atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 psm0: irq 12 on atkbdc0 psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons psm0: config:00000000, flags:00000000, packet size:4 psm0: syncmask:08, syncbits:08 unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: