From owner-freebsd-hardware@FreeBSD.ORG Sun Jan 20 22:11:50 2008 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 0E21416A418 for ; Sun, 20 Jan 2008 22:11:50 +0000 (UTC) (envelope-from lnb@freebsdsystems.com) Received: from mx1.freebsdsystems.com (ns.freebsdsystems.com [69.90.68.2]) by mx1.freebsd.org (Postfix) with ESMTP id 7F65013C447 for ; Sun, 20 Jan 2008 22:11:49 +0000 (UTC) (envelope-from lnb@freebsdsystems.com) Received: (qmail 3991 invoked by uid 89); 20 Jan 2008 21:44:22 -0000 Received: from unknown (HELO panda.freebsdsystems.com) (lnb@freebsdsystems.com@216.235.8.115) by mx1.freebsdsystems.com with ESMTPA; 20 Jan 2008 21:44:21 -0000 Message-ID: <4793C0E1.1080408@freebsdsystems.com> Date: Sun, 20 Jan 2008 16:45:05 -0500 From: Lanny Baron Organization: Freedom Technologies Corp. FreeBSD Systems User-Agent: Thunderbird 2.0.0.6 (X11/20071105) MIME-Version: 1.0 To: "Peter J. Blowers" References: <535B15A1-D156-486B-9FEE-327B1ACE711D@safarivideonetworks.com> In-Reply-To: <535B15A1-D156-486B-9FEE-327B1ACE711D@safarivideonetworks.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: freebsd-hardware@freebsd.org Subject: Re: Dell Poweredge 2950 w/ PERC 6 from FreeBSD 6.3-RC2 -> FreeBSD 6.2-RELEASE? X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 20 Jan 2008 22:11:50 -0000 Hi Peter, I looked at your email and thought it was strange the the dell server wouldn't see mfi. I thought I would give one of our servers a whirl and try both 6.2-RELEASE (amd64) and 6.3-RELEASE (amd64). I used amd64 for this install because the server has 16GB of memory. Perhaps you can send a dmesg so we can compare? The dmesg you see below on both installs was done out of the box without anything done to kernel or any other files on the same 2680 server. First 6.2-RELEASE (AMD64): proserv2680# dmesg Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RELEASE #0: Fri Jan 12 08:43:30 UTC 2007 root@portnoy.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP ACPI APIC Table: Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(R) CPU E5345 @ 2.33GHz (2339.15-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6f7 Stepping = 7 Features=0xbfebfbff Features2=0x4e3bd,CX16,,,> AMD Features=0x20100800 AMD Features2=0x1 Cores per package: 4 real memory = 18790481920 (17920 MB) avail memory = 16599867392 (15830 MB) FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 cpu4 (AP): APIC ID: 4 cpu5 (AP): APIC ID: 5 cpu6 (AP): APIC ID: 6 cpu7 (AP): APIC ID: 7 ioapic0 irqs 0-23 on motherboard ioapic1 irqs 24-47 on motherboard lapic0: Forcing LINT1 to edge trigger kbd1 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: on motherboard acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi0: Power Button (fixed) acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: on acpi0 acpi_throttle0: on cpu0 cpu1: on acpi0 acpi_throttle1: on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 cpu2: on acpi0 acpi_throttle2: on cpu2 acpi_throttle2: failed to attach P_CNT device_attach: acpi_throttle2 attach returned 6 cpu3: on acpi0 acpi_throttle3: on cpu3 acpi_throttle3: failed to attach P_CNT device_attach: acpi_throttle3 attach returned 6 cpu4: on acpi0 acpi_throttle4: on cpu4 acpi_throttle4: failed to attach P_CNT device_attach: acpi_throttle4 attach returned 6 cpu5: on acpi0 acpi_throttle5: on cpu5 acpi_throttle5: failed to attach P_CNT device_attach: acpi_throttle5 attach returned 6 cpu6: on acpi0 acpi_throttle6: on cpu6 acpi_throttle6: failed to attach P_CNT device_attach: acpi_throttle6 attach returned 6 cpu7: on acpi0 acpi_throttle7: on cpu7 acpi_throttle7: failed to attach P_CNT device_attach: acpi_throttle7 attach returned 6 acpi_button0: on acpi0 pcib0: port 0xca2,0xca3,0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: at device 2.0 on pci0 pci1: on pcib1 pcib2: irq 16 at device 0.0 on pci1 pci2: on pcib2 pcib3: irq 16 at device 0.0 on pci2 pci3: on pcib3 pcib4: at device 0.0 on pci3 pci4: on pcib4 mfi0: mem 0xb8b00000-0xb8b0ffff,0xb8900000-0xb891ffff irq 18 at device 14.0 on pci4 mfi0: 433 (254162137s/0x0020/0) - Shutdown command received from host mfi0: 434 (4278190080s/0x0020/0) - PCI 0x041000 0x04411 0x048086 0x043501: Firmware initialization started (PCI ID 0411/1000/3501/8086) mfi0: 435 (4278190080s/0x0020/0) - Type 18: Firmware version 1.12.00-0310 mfi0: 436 (4278190090s/0x0008/0) - Battery started charging mfi0: 437 (4278190090s/0x0008/0) - Battery temperature is normal mfi0: 438 (4278190090s/0x0008/0) - Battery Present mfi0: 439 (4278190091s/0x0020/0) - Type 18: Board Revision mfi0: 440 (4278190139s/0x0002/1) - PD 00(e0/s0) err 3: Encl PD 00 reset (Type 03) mfi0: 441 (4278190143s/0x0004/0) - PD 13(e1/s255) event: Enclosure (SES) discovered on PD 0d(c None/p1) mfi0: 442 (4278190180s/0x0002/1) - PD 13(e13/s255) err 3: Encl PD 0d Path 50015074f652e000 reset (Type 03) mfi0: 443 (4278190197s/0x0002/0) - PD 13(e13/s255) event: Inserted: Encl PD 0d mfi0: 444 (4278190197s/0x0002/0) - Type 29: Inserted: PD 0d(c None/p1) Info: enclPd=0d, scsiType=d, portMap=09, sasAddr=50015074f652e000,0000000000000000 mfi0: 445 (4278190197s/0x0002/0) - PD 08(e13/s0) event: Inserted: PD 08(e0x0d/s0) mfi0: 446 (4278190197s/0x0002/0) - Type 29: Inserted: PD 08(e0x0d/s0) Info: enclPd=0d, scsiType=0, portMap=00, sasAddr=5000c50007b4a225,0000000000000000 mfi0: 447 (4278190197s/0x0002/0) - PD 09(e13/s1) event: Inserted: PD 09(e0x0d/s1) mfi0: 448 (4278190197s/0x0002/0) - Type 29: Inserted: PD 09(e0x0d/s1) Info: enclPd=0d, scsiType=0, portMap=01, sasAddr=5000c50007b4b415,0000000000000000 mfi0: 449 (4278190197s/0x0002/0) - PD 10(e13/s4) event: Inserted: PD 0a(e0x0d/s4) mfi0: 450 (4278190197s/0x0002/0) - Type 29: Inserted: PD 0a(e0x0d/s4) Info: enclPd=0d, scsiType=0, portMap=04, sasAddr=5000c50007bd5aad,0000000000000000 mfi0: 451 (4278190197s/0x0002/0) - PD 11(e13/s2) event: Inserted: PD 0b(e0x0d/s2) mfi0: 452 (4278190197s/0x0002/0) - Type 29: Inserted: PD 0b(e0x0d/s2) Info: enclPd=0d, scsiType=0, portMap=02, sasAddr=5000c50007b4b459,0000000000000000 mfi0: 453 (4278190197s/0x0002/0) - PD 12(e13/s3) event: Inserted: PD 0c(e0x0d/s3) mfi0: 454 (4278190197s/0x0002/0) - Type 29: Inserted: PD 0c(e0x0d/s3) Info: enclPd=0d, scsiType=0, portMap=03, sasAddr=5000c50007b4b5dd,0000000000000000 mfi0: 455 (4278190197s/0x0042/0) - Type 22: Global Hot Spare created on PD 0a(e0x0d/s4) (global) mfi0: 456 (4278190197s/0x0002/0) - PD 10(e13/s4) state prior 0 new 2: State change on PD 0a(e0x0d/s4) from UNCONFIGURED_GOOD(0) to HOT SPARE(2) mfi0: 457 (4278190197s/0x0008/1) - BBU disabled; changing WB virtual disks to WT mfi0: 458 (254162289s/0x0020/0) - Adapter ticks 254162289 elapsed 118s: Time established as 01/20/08 16:38:09; (118 seconds since power on) pcib5: at device 0.2 on pci3 pci5: on pcib5 pcib6: irq 16 at device 1.0 on pci2 pci6: on pcib6 pcib7: irq 16 at device 2.0 on pci2 pci7: on pcib7 em0: port 0x2020-0x203f mem 0xb8820000-0xb883ffff,0xb8400000-0xb87fffff irq 18 at device 0.0 on pci7 em0: Ethernet address: 00:15:17:4f:65:2e em1: port 0x2000-0x201f mem 0xb8800000-0xb881ffff,0xb8000000-0xb83fffff irq 19 at device 0.1 on pci7 em1: Ethernet address: 00:15:17:4f:65:2f pcib8: at device 0.3 on pci1 pci8: on pcib8 pcib9: at device 3.0 on pci0 pci9: on pcib9 pcib10: at device 4.0 on pci0 pci10: on pcib10 pcib11: at device 5.0 on pci0 pci11: on pcib11 pcib12: at device 6.0 on pci0 pci12: on pcib12 pcib13: at device 7.0 on pci0 pci13: on pcib13 pci0: at device 8.0 (no driver attached) uhci0: port 0x3080-0x309f irq 23 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x3060-0x307f irq 22 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0x3040-0x305f irq 23 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: port 0x3020-0x303f irq 22 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] usb3: on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: mem 0xb8d00000-0xb8d003ff irq 23 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: on ehci0 usb4: USB revision 2.0 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered pcib14: at device 30.0 on pci0 pci14: on pcib14 pci14: at device 12.0 (no driver attached) isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30a0-0x30af irq 20 at device 31.1 on pci0 ata0: on atapci0 ata1: on atapci0 pci0: at device 31.3 (no driver attached) sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 orm0: at iomem 0xc0000-0xc8fff on isa0 ppc0: cannot reserve I/O port range sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec acd0: CDRW at ata0-slave UDMA33 mfid0: on mfi0 mfid0: 278472MB (570310656 sectors) RAID volume '' is optimal lapic3: Forcing LINT1 to edge trigger SMP: AP CPU #3 Launched! lapic1: Forcing LINT1 to edge trigger SMP: AP CPU #1 Launched! lapic2: Forcing LINT1 to edge trigger SMP: AP CPU #2 Launched! lapic4: Forcing LINT1 to edge trigger SMP: AP CPU #4 Launched! lapic6: Forcing LINT1 to edge trigger SMP: AP CPU #6 Launched! lapic5: Forcing LINT1 to edge trigger SMP: AP CPU #5 Launched! lapic7: Forcing LINT1 to edge trigger SMP: AP CPU #7 Launched! Trying to mount root from ufs:/dev/mfid0s1a mfi0: 459 (254162401s/0x0008/0) - Battery relearn pending: Battery is under charge Below is 6.3-RELEASE: Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.3-RELEASE #0: Wed Jan 16 01:43:02 UTC 2008 root@palmer.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP ACPI APIC Table: Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(R) CPU E5345 @ 2.33GHz (2339.15-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6f7 Stepping = 7 Features=0xbfebfbff Features2=0x4e3bd AMD Features=0x20100800 AMD Features2=0x1 Cores per package: 4 real memory = 18790481920 (17920 MB) avail memory = 16598941696 (15829 MB) FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 cpu4 (AP): APIC ID: 4 cpu5 (AP): APIC ID: 5 cpu6 (AP): APIC ID: 6 cpu7 (AP): APIC ID: 7 ioapic0 irqs 0-23 on motherboard ioapic1 irqs 24-47 on motherboard lapic0: Forcing LINT1 to edge trigger kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Jan 16 2008 01:41:13) acpi0: on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 cpu0: on acpi0 acpi_throttle0: on cpu0 cpu1: on acpi0 acpi_throttle1: on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 cpu2: on acpi0 acpi_throttle2: on cpu2 acpi_throttle2: failed to attach P_CNT device_attach: acpi_throttle2 attach returned 6 cpu3: on acpi0 acpi_throttle3: on cpu3 acpi_throttle3: failed to attach P_CNT device_attach: acpi_throttle3 attach returned 6 cpu4: on acpi0 acpi_throttle4: on cpu4 acpi_throttle4: failed to attach P_CNT device_attach: acpi_throttle4 attach returned 6 cpu5: on acpi0 acpi_throttle5: on cpu5 acpi_throttle5: failed to attach P_CNT device_attach: acpi_throttle5 attach returned 6 cpu6: on acpi0 acpi_throttle6: on cpu6 acpi_throttle6: failed to attach P_CNT device_attach: acpi_throttle6 attach returned 6 cpu7: on acpi0 acpi_throttle7: on cpu7 acpi_throttle7: failed to attach P_CNT device_attach: acpi_throttle7 attach returned 6 acpi_button0: on acpi0 pcib0: port 0xca2,0xca3,0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: at device 2.0 on pci0 pci1: on pcib1 pcib2: irq 16 at device 0.0 on pci1 pci2: on pcib2 pcib3: irq 16 at device 0.0 on pci2 pci3: on pcib3 pcib4: at device 0.0 on pci3 pci4: on pcib4 mfi0: mem 0xb8b00000-0xb8b0ffff,0xb8900000-0xb891ffff irq 18 at device 14.0 on pci4 mfi0: Megaraid SAS driver Ver 2.00 mfi0: 379 (254160554s/0x0020/0) - Shutdown command received from host mfi0: 380 (4278190080s/0x0020/0) - PCI 0x041000 0x04411 0x048086 0x043501: Firmware initialization started (PCI ID 0411/1000/3501/8086) mfi0: 381 (4278190080s/0x0020/0) - Type 18: Firmware version 1.12.00-0310 mfi0: 382 (4278190080s/0x0020/0) - PCI 0x041000 0x04411 0x048086 0x043501: Firmware initialization started (PCI ID 0411/1000/3501/8086) mfi0: 383 (4278190080s/0x0020/0) - Type 18: Firmware version 1.12.00-0310 mfi0: 384 (4278190094s/0x0008/0) - Battery started charging mfi0: 385 (4278190094s/0x0008/0) - Battery temperature is normal mfi0: 386 (4278190094s/0x0008/0) - Battery Present mfi0: 387 (4278190094s/0x0020/0) - Type 18: Board Revision mfi0: 388 (4278190141s/0x0002/1) - PD 00(e0/s0) err 3: Encl PD 00 reset (Type 03) mfi0: 389 (4278190145s/0x0004/0) - PD 13(e1/s255) event: Enclosure (SES) discovered on PD 0d(c None/p1) mfi0: 390 (4278190145s/0x0002/0) - PD 13(e13/s255) event: Inserted: Encl PD 0d mfi0: 391 (4278190145s/0x0002/0) - Type 29: Inserted: PD 0d(c None/p1) Info: enclPd=0d, scsiType=d, portMap=09, sasAddr=50015074f652e000,0000000000000000 mfi0: 392 (4278190145s/0x0002/0) - PD 08(e13/s0) event: Inserted: PD 08(e0x0d/s0) mfi0: 393 (4278190145s/0x0002/0) - Type 29: Inserted: PD 08(e0x0d/s0) Info: enclPd=0d, scsiType=0, portMap=00, sasAddr=5000c50007b4a225,0000000000000000 mfi0: 394 (4278190145s/0x0002/0) - PD 09(e13/s1) event: Inserted: PD 09(e0x0d/s1) mfi0: 395 (4278190145s/0x0002/0) - Type 29: Inserted: PD 09(e0x0d/s1) Info: enclPd=0d, scsiType=0, portMap=01, sasAddr=5000c50007b4b415,0000000000000000 mfi0: 396 (4278190145s/0x0002/0) - PD 10(e13/s4) event: Inserted: PD 0a(e0x0d/s4) mfi0: 397 (4278190145s/0x0002/0) - Type 29: Inserted: PD 0a(e0x0d/s4) Info: enclPd=0d, scsiType=0, portMap=04, sasAddr=5000c50007bd5aad,0000000000000000 mfi0: 398 (4278190145s/0x0002/0) - PD 11(e13/s2) event: Inserted: PD 0b(e0x0d/s2) mfi0: 399 (4278190145s/0x0002/0) - Type 29: Inserted: PD 0b(e0x0d/s2) Info: enclPd=0d, scsiType=0, portMap=02, sasAddr=5000c50007b4b459,0000000000000000 mfi0: 400 (4278190145s/0x0002/0) - PD 12(e13/s3) event: Inserted: PD 0c(e0x0d/s3) mfi0: 401 (4278190145s/0x0002/0) - Type 29: Inserted: PD 0c(e0x0d/s3) Info: enclPd=0d, scsiType=0, portMap=03, sasAddr=5000c50007b4b5dd,0000000000000000 mfi0: 402 (4278190145s/0x0042/0) - Type 22: Global Hot Spare created on PD 0a(e0x0d/s4) (global) mfi0: 403 (4278190145s/0x0002/0) - PD 10(e13/s4) state prior 0 new 2: State change on PD 0a(e0x0d/s4) from UNCONFIGURED_GOOD(0) to HOT SPARE(2) mfi0: 404 (4278190146s/0x0008/1) - BBU disabled; changing WB virtual disks to WT mfi0: 405 (254160660s/0x0020/0) - Adapter ticks 254160660 elapsed 66s: Time established as 01/20/08 16:11:00; (66 seconds since power on) pcib5: at device 0.2 on pci3 pci5: on pcib5 pcib6: irq 16 at device 1.0 on pci2 pci6: on pcib6 pcib7: irq 16 at device 2.0 on pci2 pci7: on pcib7 em0: port 0x2020-0x203f mem 0xb8820000-0xb883ffff,0xb8400000-0xb87fffff irq 18 at device 0.0 on pci7 em0: Ethernet address: 00:15:17:4f:65:2e em1: port 0x2000-0x201f mem 0xb8800000-0xb881ffff,0xb8000000-0xb83fffff irq 19 at device 0.1 on pci7 em1: Ethernet address: 00:15:17:4f:65:2f pcib8: at device 0.3 on pci1 pci8: on pcib8 pcib9: at device 3.0 on pci0 pci9: on pcib9 pcib10: at device 4.0 on pci0 pci10: on pcib10 pcib11: at device 5.0 on pci0 pci11: on pcib11 pcib12: at device 6.0 on pci0 pci12: on pcib12 pcib13: at device 7.0 on pci0 pci13: on pcib13 pci0: at device 8.0 (no driver attached) uhci0: port 0x3080-0x309f irq 23 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x3060-0x307f irq 22 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0x3040-0x305f irq 23 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: port 0x3020-0x303f irq 22 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] usb3: on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: mem 0xb8d00000-0xb8d003ff irq 23 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: on ehci0 usb4: USB revision 2.0 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered pcib14: at device 30.0 on pci0 pci14: on pcib14 pci14: at device 12.0 (no driver attached) isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30a0-0x30af irq 20 at device 31.1 on pci0 ata0: on atapci0 ata1: on atapci0 pci0: at device 31.3 (no driver attached) sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 orm0: at iomem 0xc0000-0xc8fff on isa0 ppc0: cannot reserve I/O port range sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec hptrr: no controller detected. acd0: CDRW at ata0-slave UDMA33 mfid0: on mfi0 mfid0: 278472MB (570310656 sectors) RAID volume '' is optimal lapic2: Forcing LINT1 to edge trigger SMP: AP CPU #2 Launched! lapic1: Forcing LINT1 to edge trigger SMP: AP CPU #1 Launched! lapic3: Forcing LINT1 to edge trigger SMP: AP CPU #3 Launched! lapic6: Forcing LINT1 to edge trigger SMP: AP CPU #6 Launched! lapic5: Forcing LINT1 to edge trigger SMP: AP CPU #5 Launched! lapic7: Forcing LINT1 to edge trigger SMP: AP CPU #7 Launched! lapic4: Forcing LINT1 to edge trigger SMP: AP CPU #4 Launched! Trying to mount root from ufs:/dev/mfid0s1a Regards, ___________________________________________________ Lanny Baron FreeBSD Systems / Freedom Technologies Corporation Toll Free: 1.877.963.1900 High Performance Servers and RAID Storage Systems http://www.FreeBSDsystems.COM ___________________________________________________ Peter J. Blowers wrote: > FreeBSD 6.3 will boot on our PERC 6 machine, but 6.2 won't recognize the > mfi device. Just backporting the mfi.ko appears to be insufficient. > Has anyone done this? Any hints as to what else might be needed? > > Thanks, > Peter J. Blowers > > _______________________________________________ > freebsd-hardware@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-hardware > To unsubscribe, send any mail to "freebsd-hardware-unsubscribe@freebsd.org"