From owner-freebsd-current Tue Aug 20 7:55: 7 2002 Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id BFE0337B400; Tue, 20 Aug 2002 07:54:38 -0700 (PDT) Received: from ns.altadena.net (ns.altadena.net [206.126.144.2]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0739743E3B; Tue, 20 Aug 2002 07:54:38 -0700 (PDT) (envelope-from pete@ns.altadena.net) Received: from ns.altadena.net (localhost [127.0.0.1]) by ns.altadena.net (8.12.3/8.12.3) with ESMTP id g7KEsbQO019935; Tue, 20 Aug 2002 07:54:37 -0700 (PDT) (envelope-from pete@ns.altadena.net) Received: (from pete@localhost) by ns.altadena.net (8.12.3/8.12.3/Submit) id g7KEsbD9019934; Tue, 20 Aug 2002 07:54:37 -0700 (PDT) (envelope-from pete) From: Pete Carah Message-Id: <200208201454.g7KEsbD9019934@ns.altadena.net> Subject: VAIO R505ES better, but... To: mobile@freebsd.org, current@freebsd.org Date: Tue, 20 Aug 2002 07:54:37 -0700 (PDT) X-Mailer: ELM [version 2.4ME+ PL68 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=iso8859-1 Content-Transfer-Encoding: 7bit Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Well, now it boots (presumably thanks to IRQ fixes for TI bridges...) Now it doesn't spot *any* devices on pc-card or the built-in wi0; also the mouse gets lost ("psm0: unable to allocate IRQ"). The Memory-stick does work (with a manual camcontrol rescan). (there are plenty of complaints from booting with no card present, but it works right once I plug one in. Firewire driver not yet present (I know about the patch and will likely try it when I get time.) I'm mostly concerned with the newcard not seeing *any* cards or card-like objects (e.g. the built-in orinoco). Stable sees the orinoco but won't use it due to lack of a properly-mapped IRQ. My zoom modem card was also plugged in for this boot and not spotted... Another nit for whoever handles ACPI: If I do "shutdown -p now", the system powers down apparently properly, but when I try to power back up it locks up in a state with the power and battery light both on and nothing else running. Thank heavens for a good supply of paper clips :-) "shutdown -h now" and powering off with the button works fine. -- Pete verbose DMESG follows --------------------------------------------------------- Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #4: Tue Aug 20 05:54:23 PDT 2002 pete@port2.altadena.net:/d/obj-s/current/usr/src/sys/PORT2 Preloaded elf kernel "/boot/kernel/kernel" at 0xc043e000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc043e0a8. Calibrating clock(s) ... TSC clock: 1193121752 Hz, i8254 clock: 1193199 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method Timecounter "TSC" frequency 1193107642 Hz CPU: Pentium III/Pentium III Xeon/Celeron (1193.11-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 Features=0x383f9ff real memory = 266862592 (260608K bytes) Physical memory chunk(s): 0x00001000 - 0x0009dfff, 643072 bytes (157 pages) 0x00465000 - 0x0fceffff, 260616192 bytes (63627 pages) 0x0fd00000 - 0x0fe77fff, 1540096 bytes (376 pages) avail memory = 253870080 (247920K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f6ba0 bios32: Entry = 0xfd871 (c00fd871) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd870+0x13a pnpbios: Found PnP BIOS data at 0xc00f6bd0 pnpbios: Entry = f0000:880c Rev = 1.0 Other BIOS signatures found: random: mem: Pentium Pro MTRR support enabled null: pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f904 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=35758086) Using $PIR table, 9 entries at 0xc00fdf30 npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 Timecounter "ACPI-fast" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_cpu0: on acpi0 acpi_tz0: on acpi0 acpi_lid0: on acpi0 acpi_button0: on acpi0 acpi_pcib0: port 0xcf8-0xcff on acpi0 pci0: physical bus=0 map[10]: type 3, range 32, base 00000000, size 0, enabled found-> vendor=0x8086, dev=0x3575, revid=0x04 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 map[10]: type 3, range 32, base e8000000, size 27, enabled map[14]: type 1, range 32, base e0000000, size 19, enabled found-> vendor=0x8086, dev=0x3577, revid=0x04 bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 intpin=a, irq=9 powerspec 1 supports D0 D1 D3 current D0 map[10]: type 3, range 32, base f0000000, size 27, enabled map[14]: type 1, range 32, base e0080000, size 19, enabled found-> vendor=0x8086, dev=0x3577, revid=0x00 bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 powerspec 1 supports D0 D1 D3 current D0 map[20]: type 4, range 32, base 00001800, size 5, enabled found-> vendor=0x8086, dev=0x2482, revid=0x02 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 intpin=a, irq=9 map[20]: type 4, range 32, base 00001820, size 5, enabled found-> vendor=0x8086, dev=0x2484, revid=0x02 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 intpin=b, irq=9 map[20]: type 4, range 32, base 00001840, size 5, enabled found-> vendor=0x8086, dev=0x2487, revid=0x02 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 intpin=c, irq=255 found-> vendor=0x8086, dev=0x2448, revid=0x42 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 found-> vendor=0x8086, dev=0x248c, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 map[10]: type 4, range 32, base 000001f0, size 3, enabled map[14]: type 4, range 32, base 000003f4, size 2, enabled map[18]: type 4, range 32, base 00000170, size 3, enabled map[1c]: type 4, range 32, base 00000374, size 2, enabled map[20]: type 4, range 32, base 00001860, size 4, enabled map[24]: type 1, range 32, base e0100000, size 10, memory disabled found-> vendor=0x8086, dev=0x248a, revid=0x02 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 intpin=a, irq=255 map[20]: type 4, range 32, base 00001880, size 5, enabled found-> vendor=0x8086, dev=0x2483, revid=0x02 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 intpin=b, irq=255 map[10]: type 4, range 32, base 00001c00, size 8, port disabled map[14]: type 4, range 32, base 000018c0, size 6, enabled found-> vendor=0x8086, dev=0x2485, revid=0x02 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 intpin=b, irq=9 map[10]: type 4, range 32, base 00002400, size 8, port disabled map[14]: type 4, range 32, base 00002000, size 7, enabled found-> vendor=0x8086, dev=0x2486, revid=0x02 bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 intpin=b, irq=255 pci0: on acpi_pcib0 pci0: at device 2.0 (no driver attached) pci0: at device 2.1 (no driver attached) uhci0: port 0x1800-0x181f irq 9 at device 29.0 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x1820-0x183f irq 9 at device 29.1 on pci0 usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0x1840-0x185f at device 29.2 on pci0 acpi_pcib0: matched entry for 0.29.INTC (source \\_SB_.LNKC) acpi_pcib0: possible interrupts: 9 acpi_pcib0: routed interrupt 9 via \\_SB_.LNKC usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered umass0: Sony USB Memory Stick Slot, rev 1.10/1.09, addr 2 umass0:0:0:-1: Attached to scbus0 as device 0 pcib1: at device 30.0 on pci0 pcib1: secondary bus 2 pcib1: subordinate bus 2 pcib1: I/O decode 0x3000-0x3fff pcib1: memory decode 0xe0200000-0xe02fffff pcib1: prefetched decode 0xfff00000-0xfffff pci1: physical bus=2 map[10]: type 1, range 32, base e0205000, size 11, enabled map[14]: type 1, range 32, base e0200000, size 14, enabled found-> vendor=0x104c, dev=0x8023, revid=0x00 bus=2, slot=2, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 found-> vendor=0x1180, dev=0x0475, revid=0x80 bus=2, slot=5, func=0 class=06-07-00, hdrtype=0x02, mfdev=0 intpin=a, irq=3 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base e0204000, size 12, enabled map[14]: type 4, range 32, base 00003000, size 6, enabled found-> vendor=0x8086, dev=0x1031, revid=0x42 bus=2, slot=8, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 found-> vendor=0x104c, dev=0xac50, revid=0x01 bus=2, slot=11, func=0 class=06-07-00, hdrtype=0x02, mfdev=0 intpin=a, irq=255 powerspec 1 supports D0 D1 D2 D3 current D0 pci1: on pcib1 pci1: at device 2.0 (no driver attached) cbb0: irq 3 at device 5.0 on pci1 pcib1: device cbb0 requested decoded memory range 0xe0200000-0xe02fffff cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 fxp0: port 0x3000-0x303f mem 0xe0204000-0xe0204fff irq 9 at device 8.0 on pci1 pcib1: device fxp0 requested decoded memory range 0xe0204000-0xe0204fff fxp0: using memory space register mapping fxp0: Ethernet address 08:00:46:4e:96:17 fxp0: PCI IDs: 8086 1031 104d 8100 0042 fxp0: Dynamic Standby mode is disabled inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: fxp0 attached cbb1: at device 11.0 on pci1 pcib1: device cbb1 requested decoded memory range 0xe0200000-0xe02fffff cardbus1: on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb: Unable to map IRQ... device_probe_and_attach: cbb1 attach returned 12 isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xe0100000-0xe01003ff at device 31.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1860 ata0: mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: mask=03 stat0=50 stat1=00 ata0-master: ATA 01 a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1868 ata1: mask=03 ostat0=00 ostat2=00 ata1-master: ATAPI 00 00 ata1-slave: ATAPI 00 00 ata1: mask=03 stat0=00 stat1=00 ata1: devices=00 ata1: at 0x170 irq 15 on atapci0 pci0: at device 31.3 (no driver attached) pci0: at device 31.5 (no driver attached) pci0: at device 31.6 (no driver attached) atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: unable to allocate IRQ acpi_ec0: port 0x66,0x62 on acpi0 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A unknown: not probed (disabled) unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold plip0: on ppbus0 bpf: lp0 attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 fdc0: port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 acpi_cmbat0: on acpi0 acpi_acad0: on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) eisa0: on motherboard eisa0: unknown card B@H0000 (0x08080000) at slot 1 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: