Date: Sun, 21 Oct 2001 00:19:38 -0400 (EDT) From: Nathan Binkert <binkertn@umich.edu> To: Matthew <mgt@hytekblue.com> Cc: <lyndon@atg.aciworldwide.com>, <freebsd-net@FreeBSD.ORG> Subject: Re: D-Link DGE-500T support Message-ID: <Pine.GSO.4.33.0110210019000.21042-100000@soso.eecs.umich.edu> In-Reply-To: <200110202206550921.00165911@cobalt.hytekblue.com>
next in thread | previous in thread | raw e-mail | index | archive | help
The DGE-500T uses a different chip than the DGE-500SX. The 500T uses the nge driver, and the 500SX uses the lge driver. Nathan > well obvoiusly this is not the same but i was able to get the lge > driver to work with the dlink DGE-500SX. i get about 212mb a second > through put on a 32bit pci slot and closer to 600mb/s on a 64bit slot > however the card does not seam to be very stable on my motherboard in > a 64bit slot. best of luck with the dge-500t > Matthew > if its not broke i will fix it till it is :) > > > *********** REPLY SEPARATOR *********** > > On 10/19/2001, at 5:50 PM, Lyndon Nerenberg wrote: > > >Have any of you managed to get the DFE-500T running with the > >lge driver? lge(4) hints that this should work, but I don't see > >anything in the list archives to indicate that someone has > >actually used this NIC successfully. (Note: I'm talking about > >the NIC that talks over copper, not fibre.) > > > > > >--lyndon > > > >Lizzie Borden took an axe, > >And plunged it deep into the VAX; > >Don't you envy people who > >Do all the things YOU want to do? > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org > >with "unsubscribe freebsd-net" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-net" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-net" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.4.33.0110210019000.21042-100000>