Date: Mon, 23 Jul 2001 19:10:13 -0400 From: Randall Hopper <aa8vb@nc.rr.com> To: Eric Anholt <anholt@teleport.com> Cc: multimedia@FreeBSD.ORG Subject: Matrox G450 and XFree86-4/DRI Message-ID: <20010723191013.B892@nc.rr.com> In-Reply-To: <01072001350401.00581@positron.anholt.dyn.dhs.org>; from anholt@teleport.com on Fri, Jul 20, 2001 at 01:35:04AM -0700 References: <3B577AFA.39D5B7F@sm.socccd.cc.ca.us> <01072001350401.00581@positron.anholt.dyn.dhs.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Eric Anholt: |You can visit my page http://gladstone.uoregon.edu/~eanholt/dri/ for |information on the DRI for FreeBSD. Thanks for writing this and keeping it up-to-date. It's been a big help! Thanks to your write-up, I'm to the point where everything's built, installed, kernel modules loading (I assume drm.ko is not relevent anymore), but DRI is still a bit shy and won't enable. On boot-up, I see: drm0: <Matrox G400 (AGP)> mem 0xf2000000-0xf27fffff,0xf2800000-0xf2803fff,0xf4000000-0xf5ffffff irq 11 at device 5.0 on pci1 --> error: [drm:mga_init] *ERROR* Cannot initialize the agpgart module. device_probe_and_attach: drm0 attach returned 12 The relevent XFree86.0.log bits I think are: (II) MGA(0): [drm] bpp: 16 depth: 16 (II) MGA(0): [drm] Sarea 2200+664: 2864 (II) MGA(0): [drm] drmOpen failed --> (EE) MGA(0): [drm] DRIScreenInit failed. Disabling DRI. I'm a bit confused. I thought agpgart was history. Also, I have a G450, not a G400. I'll start digging in DRM for clues, but if anyone has ideas or debugging tips, please let me know! Thanks, Randall -- Randall Hopper aa8vb@nc.rr.com dmesg: ... FreeBSD 4.3-STABLE #2: Mon Jul 23 17:44:40 EDT 2001 rhh@stealth:/usr/src/sys/compile/STEALTH ... Preloaded elf kernel "kernel" at 0xc0484000. Preloaded elf module "linux.ko" at 0xc048409c. Preloaded elf module "agp.ko" at 0xc048413c. Preloaded elf module "tdfx.ko" at 0xc04841d8. Preloaded elf module "mga.ko" at 0xc0484274. Preloaded elf module "r128.ko" at 0xc0484310. Preloaded elf module "radeon.ko" at 0xc04843ac. Preloaded elf module "gamma.ko" at 0xc048444c. ... Pentium Pro MTRR support enabled ... info: [drm] Checking PCI vendor=4130, device=28686 info: [drm] Checking PCI vendor=4130, device=28686 info: [drm] Checking PCI vendor=4130, device=28686 info: [drm] Checking PCI vendor=4130, device=28686 info: [drm] Checking PCI vendor=4130, device=28686 info: [drm] Checking PCI vendor=4130, device=28687 info: [drm] Checking PCI vendor=4130, device=28687 info: [drm] Checking PCI vendor=4130, device=28687 info: [drm] Checking PCI vendor=4130, device=28687 ... info: [drm] Checking PCI vendor=4139, device=1317 info: [drm] Checking PCI vendor=4139, device=1317 drm0: <Matrox G400 (AGP)> mem 0xf2000000-0xf27fffff,0xf2800000-0xf2803fff,0xf4000000-0xf5ffffff irq 11 at device 5.0 on pci1 error: [drm:mga_init] *ERROR* Cannot initialize the agpgart module. device_probe_and_attach: drm0 attach returned 12 info: [drm] Checking PCI vendor=4358, device=1670 info: [drm] Checking PCI vendor=4358, device=1670 info: [drm] Checking PCI vendor=4358, device=1670 info: [drm] Checking PCI vendor=4358, device=1670 ... info: [drm] Checking PCI vendor=4358, device=12344 info: [drm] Checking PCI vendor=4358, device=12344 info: [drm] Checking PCI vendor=4358, device=12344 info: [drm] Checking PCI vendor=4358, device=12344 info: [drm] Checking PCI vendor=4358, device=12344 ... info: [drm] Checking PCI vendor=4358, device=12375 info: [drm] Checking PCI vendor=4358, device=12375 info: [drm] Checking PCI vendor=4358, device=12375 info: [drm] Checking PCI vendor=4358, device=12375 info: [drm] Checking PCI vendor=4358, device=12375 ... info: [drm] Checking PCI vendor=4279, device=36949 info: [drm] Checking PCI vendor=4279, device=36949 ... info: [drm] Checking PCI vendor=4096, device=1 info: [drm] Checking PCI vendor=4096, device=1 info: [drm] Checking PCI vendor=4096, device=1 info: [drm] Checking PCI vendor=4096, device=1 info: [drm] Checking PCI vendor=4096, device=1 ... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010723191013.B892>