From owner-freebsd-bugs Wed Dec 9 22:00:03 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id WAA05481 for freebsd-bugs-outgoing; Wed, 9 Dec 1998 22:00:03 -0800 (PST) (envelope-from owner-freebsd-bugs@FreeBSD.ORG) Received: from freefall.freebsd.org (freefall.FreeBSD.ORG [204.216.27.21]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id VAA05438 for ; Wed, 9 Dec 1998 21:59:59 -0800 (PST) (envelope-from gnats@FreeBSD.org) Received: (from Unknown UID 563@localhost) by freefall.freebsd.org (8.8.8/8.8.5) id WAA16190; Wed, 9 Dec 1998 22:00:00 -0800 (PST) Received: (from nobody@localhost) by hub.freebsd.org (8.8.8/8.8.8) id VAA04698; Wed, 9 Dec 1998 21:54:18 -0800 (PST) (envelope-from nobody) Message-Id: <199812100554.VAA04698@hub.freebsd.org> Date: Wed, 9 Dec 1998 21:54:18 -0800 (PST) From: tim.withers@computer.org To: freebsd-gnats-submit@FreeBSD.ORG X-Send-Pr-Version: www-1.0 Subject: kern/9036: Boot 3.0-Release hangs with BT-445S after 'Waiting 15 seconds for SCSI devices to settle' Sender: owner-freebsd-bugs@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org >Number: 9036 >Category: kern >Synopsis: Boot 3.0-Release hangs with BT-445S after 'Waiting 15 seconds for SCSI devices to settle' >Confidential: no >Severity: critical >Priority: low >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Wed Dec 9 22:00:00 PST 1998 >Last-Modified: >Originator: Tim Withers >Organization: >Release: 2.2.7-Release upgrading to 3.0-Release >Environment: FreeBSD epsilon.financeworld.net 2.2.7-RELEASE FreeBSD 2.2.7-RELEASE #0: Mon Sep 21 11:01:16 EST 1998 timw@epsilon.financeworld.net:/usr/src/sys/compile/EPS ILON i386 >Description: I am attempting to upgrade from 2.2.7-Release to 3.0-Release using the Walnut Creek CDROM. When booting from the CDROM (using install.bat), or from an installation boot floppy (boot.flp), the boot process hangs after the message: 'Waiting 15 seconds for SCSI devices to settle' I waited at least 5 minutes, with no change. I use user-config to disable all devices which are not present on my system. If I boot from the floppy and disable the bt0 device in user-config, the system successfully boots up to the installation menu. Below are the last few lines displayed from an attempted boot with the -v flag. Below that is an output of dmesg from the same system booted under FreeBSD 2.2.7-Release. ---------- avail memory = 16961536 (16564K bytes) ... adv0: disabled, not probed. bt0 at 0x330-0x333 irq 11 on isa bt0: BT-445S FW Rev. 3.37 Narrow SCSI Host Adapter, SCSI ID 7, 30 CCBs bt0: Using Strict Round Robin Mailbox Mode aha0: disabled, not probed. npx0 on motherboard npx0: INT 16 interface imasks: bio c0084040, tty c007049a, net c007049a BIOS Geometries: 0:03ff0f3f 0..1023=1024 cylinders, 0..15=16 heads, 1..63=63 sectors 0 accounted for Device configuration finished. Waiting 15 seconds for SCSI devices to settle bt0: Using Strict Round Robin Mailbox Mode ---------- Copyright (c) 1992-1998 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 2.2.7-RELEASE #0: Mon Sep 21 11:01:16 EST 1998 timw@epsilon.financeworld.net:/usr/src/sys/compile/EPSILON CPU: i486DX (486-class CPU) real memory = 21233664 (20736K bytes) avail memory = 18980864 (18536K bytes) Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> ed0 at 0x280-0x29f irq 10 on isa ed0: address 00:60:67:04:9a:85, type NE2000 (16 bit) sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface lpt1 not found at 0xffffffff fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 1222MB (2503872 sectors), 2484 cyls, 16 heads, 63 S/T, 512 B/S bt0: Bt445S/ 0-(32bit) bus bt0: Your card cannot DMA above 16MB boundary. Bounce buffering enabled. bt0: reading board settings, busmastering, int=11 bt0: version 3.37, fast sync, parity, 32 mbxs, 32 ccbs bt0: targ 2 sync rate= 5.00MB/s(200ns), offset=15 bt0: targ 6 async bt0: Using Strict Round robin scheme bt0 at 0x330 irq 11 on isa (bt0:2:0): "DEC RZ25 (C) DEC 0A00" type 0 fixed SCSI 2 sd0(bt0:2:0): Direct-Access 406MB (832527 512 byte sectors) (bt0:6:0): "DEC RRD42 (C) DEC 4.3d" type 5 removable SCSI 2 cd0(bt0:6:0): CD-ROM cd present [1100228 x 512 byte records] npx0 flags 0x1 on motherboard npx0: INT 16 interface >How-To-Repeat: Boot 3.0-Release install floppy or CDROM (using install.bat), and leave device bt0 enabled in user-config. >Fix: Boots to installation menu if bt0 is disabled in user-config. >Audit-Trail: >Unformatted: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message