From owner-freebsd-questions Mon Aug 9 9:25:30 1999 Delivered-To: freebsd-questions@freebsd.org Received: from ds9.sci.fi (ds9.sci.fi [195.74.0.54]) by hub.freebsd.org (Postfix) with ESMTP id 4E89015256 for ; Mon, 9 Aug 1999 09:25:23 -0700 (PDT) (envelope-from yurtesen@ispro.net.tr) Received: from ispro.net.tr (dyn-0-191.tku.netti.fi [195.16.223.192]) by ds9.sci.fi (8.9.1/8.9.1) with ESMTP id TAA01020; Mon, 9 Aug 1999 19:22:42 +0300 (EET DST) Message-ID: <37AF003B.ED741737@ispro.net.tr> Date: Mon, 09 Aug 1999 19:22:19 +0300 From: Evren Yurtesen X-Mailer: Mozilla 4.51 [en] (Win98; I) X-Accept-Language: en MIME-Version: 1.0 To: Juha.Nurmela@quicknet.inet.fi, freebsd-questions@freebsd.org Subject: Re: BT878-TV card failure References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Alright, I use FreeBSD 3.2-STABLE,p200MMX, Intel VX Chipset, and in windows the tv card seems to be at irq 11,also in bios too I tried to set it to irq 10 from bios and now windows says it is on irq 11 too well, there is nothing much in the bios pnp settings since this is a compaq machine and it tries to detect everything. The pci irq option level or edge is not in my bios. today I have tried telling to freebsd that my tv card is a flyvideo from the kernel config. file. I just got the error message below, but the hard drive was not working at all. the interesting thing is the tv card is working very well under windows. so there should not be any hardware problem or bios configuration problem. I just should set the right things from freeBSD windows now sees the card at IRQ 10 and the memory range 0381F000-0381FFFF Aug 9 18:38:40 suomi /kernel: psmintr: out of sync (00c0 != 0000). here is the dmesg output, well do not worry about the hauppauge message, I am trying different card and different tuner combinations every time I run FreeBSD and the WARNING: / was not properly dismounted message (well I am shutting down freebsd properly but it got crashed so bad that nothing was working so I had to power off) Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.2-STABLE #15: Mon Aug 2 21:15:04 GMT 1999 root@suomi.ispro.net.tr:/usr/src/sys/compile/COMPAQ Timecounter "i8254" frequency 1193182 Hz CPU: Pentium/P55C (200.46-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x544 Stepping = 4 Features=0x8001bf real memory = 25165824 (24576K bytes) avail memory = 22327296 (21804K bytes) Preloaded elf kernel "kernel" at 0xc0250000. Probing for devices on PCI bus 0: chip0: rev 0x02 on pci0.0.0 chip1: rev 0x01 on pci0.1.0 ide_pci0: rev 0x00 on pci0.1.1 vga0: rev 0x54 int a irq 255 on pci0.2.0 bktr0: rev 0x02 int a irq 11 on pci0.3.0 bti2c0: iicbb0: on bti2c0 iicbus0: on iicbb0 master-only iicsmb0: on iicbus0 smbus0: on iicsmb0 iic0: on iicbus0 smbus1: on bti2c0 Hauppauge WinCast/TV, Temic PAL tuner. vga1: rev 0x01 int a irq 255 on pci0.4.0 Probing for PnP devices: Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> ed0 at 0x300-0x31f irq 9 on isa ed0: address 00:00:b4:3d:0f:3d, type NE2000 (16 bit) atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 irq 12 on isa psm0: model Generic PS/2 mouse, device ID 0 sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 6149MB (12594960 sectors), 13328 cyls, 15 heads, 63 S/T, 512 B/S wdc0: unit 1 (wd1): wd1: 2014MB (4124736 sectors), 4092 cyls, 16 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (wd2): wd2: 4110MB (8418816 sectors), 14848 cyls, 9 heads, 63 S/T, 512 B/S wdc1: unit 1 (atapi): , removable, accel, dma, iordis acd0: drive speed 2734KB/sec, 128KB cache acd0: supported read types: CD-DA acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked, lock protected ppc0 at 0x378 irq 7 flags 0x40 on isa ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold lpt0: on ppbus 0 lpt0: Interrupt-driven port ppi0: on ppbus 0 plip0: on ppbus 0 vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface apm0 on isa apm: found APM BIOS version 1.2 Intel Pentium detected, installing workaround for F00F bug changing root device to wd2s1a WARNING: / was not properly dismounted psmintr: out of sync (00c0 != 0000). psmintr: out of sync (00c0 != 0000). psmintr: out of sync (00c0 != 0000). psmintr: out of sync (00c0 != 0000). bere is the kernel config. file # # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # For more information read the handbook part System Administration -> # Configuring the FreeBSD Kernel -> The Configuration File. # The handbook is available in /usr/share/doc/handbook or online as # latest version from the FreeBSD World Wide Web server # # # An exhaustive list of options and more detailed explanations of the # device lines is present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $Id: GENERIC,v 1.143.2.13 1999/05/15 18:13:58 obrien Exp $ machine "i386" #cpu "I386_CPU" #cpu "I486_CPU" cpu "I586_CPU" #cpu "I686_CPU" ident COMPAQ maxusers 32 #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] #options MFS #Memory Filesystem #options MFS_ROOT #MFS usable as root device, "MFS" req'ed #options NFS #Network Filesystem #options NFS_ROOT #NFS usable as root device, "NFS" req'ed #options MSDOSFS #MSDOS Filesystem #options "CD9660" #ISO 9660 Filesystem #options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] #options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor config kernel root on wd0 # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs controller isa0 controller pnp0 #controller eisa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 disk fd0 at fdc0 drive 0 #disk fd1 at fdc0 drive 1 options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device acd0 #IDE CD-ROM #device wfd0 #IDE Floppy (e.g. LS-120) # A single entry for any of these controllers (ncr, ahb, ahc) is # sufficient for any number of installed devices. #controller ncr0 #controller ahb0 #controller ahc0 #controller isp0 # This controller offers a number of configuration options, too many to # document here - see the LINT file in this directory and look up the # dpt0 entry there for much fuller documentation on this. #controller dpt0 #controller adv0 at isa? port ? cam irq ? #controller adw0 #controller bt0 at isa? port ? cam irq ? #controller aha0 at isa? port ? cam irq ? #controller scbus0 #device da0 #device sa0 #device pass0 #device cd0 #Only need one of these, the code dynamically grows #device wt0 at isa? port 0x300 bio irq 5 drq 1 #device mcd0 at isa? port 0x300 bio irq 10 #controller matcd0 at isa? port 0x230 bio #device scd0 at isa? port 0x230 bio # atkbdc0 controlls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 device psm0 at isa? tty irq 12 device vga0 at isa? port ? conflicts # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? tty # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? tty #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std device npx0 at isa? port IO_NPX irq 13 # # Laptop support (see LINT for more options) # device apm0 at isa? flags 0x0 # Advanced Power Management # PCCARD (PCMCIA) support #controller card0 #device pcic0 at card? #device pcic1 at card? device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 #device sio1 at isa? port "IO_COM2" tty irq 3 #device sio2 at isa? disable port "IO_COM3" tty irq 5 #device sio3 at isa? disable port "IO_COM4" tty irq 9 # Parallel port device ppc0 at isa? port? flags 0x40 net irq 7 controller ppbus0 device lpt0 at ppbus? device plip0 at ppbus? device ppi0 at ppbus? #controller vpo0 at ppbus? # # The following Ethernet NICs are all PCI devices. # #device ax0 # ASIX AX88140A #device de0 # DEC/Intel DC21x4x (``Tulip'') #device fxp0 # Intel EtherExpress PRO/100B (82557, 82558) #device mx0 # Macronix 98713/98715/98725 (``PMAC'') #device pn0 # Lite-On 82c168/82c169 (``PNIC'') #device rl0 # RealTek 8129/8139 #device tl0 # Texas Instruments ThunderLAN #device tx0 # SMC 9432TX (83c170 ``EPIC'') #device vr0 # VIA Rhine, Rhine II #device vx0 # 3Com 3c590, 3c595 (``Vortex'') #device wb0 # Winbond W89C840F #device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'') # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. device ed0 at isa? port 0x300 net irq 9 iomem 0xd8000 #device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 #device ep0 at isa? port 0x300 net irq 10 #device ex0 at isa? port? net irq? #device fe0 at isa? port 0x300 net irq ? #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 #device lnc0 at isa? port 0x280 net irq 10 drq 0 #device xe0 at isa? port? irq ? #device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 #device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 #device cs0 at isa? port 0x300 net irq ? pseudo-device loop pseudo-device ether #pseudo-device sl 1 pseudo-device ppp 1 pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. options KTRACE #kernel tracing # This provides support for System V shared memory and message queues. # options SYSVSHM options SYSVMSG options SYSVSEM # The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be # aware of the legal and administrative consequences of enabling this # option. The number of devices determines the maximum number of # simultaneous BPF clients programs runnable. pseudo-device bpfilter 10 #Berkeley packet filter #benim eklediklerim options "MAXMEM=(128*1024)" pseudo-device snp 3 #Snoop device - to look at pty/vty/etc.. #tv karti olayi controller smbus0 controller iicbus0 controller iicbb0 device ic0 at iicbus? device iic0 at iicbus? device iicsmb0 at iicbus? device bktr0 options BKTR_USE_PLL options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL options OVERRIDE_CARD=10 options OVERRIDE_TUNER=2 #options OVERRIDE_MSP=1 #options OVERRIDE_DBX=1 Evrem Juha Nurmela wrote: >You have to give more specific information, OS version, >dmesg, cpu, motherboard chipset, kernel config etc. >Wild guess would be that the motherboard is not compliant, >the 878 has some compatibility settings for 430FX and >old VIA/SIS (enabled by some driver compile-time options). >Another guess would be that the irq from the 878 overlaps >others which don't like sharing. Doublecheck BIOS PnP and PCI >configuration. PCI irqs should probably be level-active. Juha Nurmela wrote: > > On Mon, 9 Aug 1999, Evren Yurtesen wrote: > > > I will get those information and send email again if it will help :) > > Okay. The errors looked very wierd, like someone was stomping > on irq14 (wd) and irq12 (psm) at the same time. Smells like a pci-bus > problem, bktr shouldn't have anything to do with those interrupts. > > > Are you using FreeBSD at inet (sonera?) ? > > I thought Finnish people are Linux people :) > > Not all. Some even drive foreign cars ;) Yes, this is a cable network > provided by Tel^WSonera, and I have a Hauppauge tv-card in FreeBSD. > > Juha To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message