From owner-freebsd-bugs Sun Jun 18 13:29:03 1995 Return-Path: bugs-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id NAA01777 for bugs-outgoing; Sun, 18 Jun 1995 13:29:03 -0700 Received: from vegemite.Stanford.EDU (2842@vegemite.Stanford.EDU [36.159.0.7]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id NAA01771 for ; Sun, 18 Jun 1995 13:29:02 -0700 Received: (hlew@localhost) by vegemite.Stanford.EDU (8.6.10/8.6.4) id NAA18707; Sun, 18 Jun 1995 13:29:00 -0700 Date: Sun, 18 Jun 1995 13:28:59 -0700 (PDT) From: Howard Lew To: Terry Lambert cc: bde@zeta.org.au, bugs@FreeBSD.org Subject: Re: 2.05R panics on boot In-Reply-To: <9506172244.AA16053@cs.weber.edu> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: bugs-owner@FreeBSD.org Precedence: bulk On Sat, 17 Jun 1995, Terry Lambert wrote: > Probably you made the BSD parition entry in the DM pseudo-partition table. Actually, drive C (wd0) is all msdos, and I wanted drive D (wd1) to be all FreeBSD, so there are no BSD partitions on wd0 which has the Ontrack DM. > > When you boot off the floppy, is it directly from the floppy or from the DM > boot menu? I have tried both ways and FreeBSD can boot up if I manually type: wd(1,a)/kernel > > This would tell for sure. > > You should boot DOS off floppy and run pfdisk. Okay, if boot from DOS (and with no Ontrack DM installed)... here's the output from pfdisk 0 (the 850MB Ontrack DM DOS Drive) and pfdisk 1 (540 MB FreeBSD drive) # Partition table on device: 0 geometry 1024 16 63 (cyls heads sectors) # ID First(cyl) Last(cyl) Name # start, length (sectors) 1 84 0 1652 unkno # 1, 1666223 # note: last(1): phys=(628,15,63) logical=(1652,15,63) # note: first(1): phys=(0,0,2) should be (0,1,1) 2 0 0 0 empty # 0, 0 3 0 0 0 empty # 0, 0 4 0 0 0 empty # 0, 0 # Partition table on device: 1 geometry 1022 16 63 (cyls heads sectors) # ID First(cyl) Last(cyl) Name # start, length (sectors) 1 165 0 1052 unkno # 63, 1061361 # note: last(1): phys=(1023,15,63) logical=(1052,15,63) 2 0 0 0 empty # 0, 0 3 0 0 0 empty # 0, 0 4 0 0 0 empty # 0, 0 --------- Now if I boot from the hard drive with Ontrack DM's dynamic drive overlay installed... # Partition table on device: 0 geometry 826 32 63 (cyls heads sectors) # ID First(cyl) Last(cyl) Name # start, length (sectors) 1 1 0 825 DOS12 # 63, 1665153 2 0 0 0 empty # 0, 0 3 0 0 0 empty # 0, 0 4 0 0 0 empty # 0, 0 # Partition table on device: 1 geometry 1022 16 63 (cyls heads sectors) # ID First(cyl) Last(cyl) Name # start, length (sectors) 1 165 0 1052 unkno # 63, 1061361 # note: last(1): phys=(1023,15,63) logical=(1052,15,63) 2 0 0 0 empty # 0, 0 3 0 0 0 empty # 0, 0 4 0 0 0 empty # 0, 0 So it appears that nothing changes on the 540MB drive that doesn't use Ontrack DM. So any ideas?