From owner-freebsd-questions Mon Mar 4 0:45: 7 2002 Delivered-To: freebsd-questions@freebsd.org Received: from nebula.anchoragerescue.org (cable-115-7-237-24.anchorageak.net [24.237.7.115]) by hub.freebsd.org (Postfix) with ESMTP id 360CA37B402 for ; Mon, 4 Mar 2002 00:45:02 -0800 (PST) Received: from there (galaxy.anchoragerescue.org [24.237.7.95]) by nebula.anchoragerescue.org (Postfix) with SMTP id AEBFEB2ED; Sun, 3 Mar 2002 23:44:45 -0900 (AKST) Content-Type: text/plain; charset="iso-8859-1" From: Beech Rintoul To: Jarek Granat Subject: Re: ppp... exited on signal 11 Date: Sun, 3 Mar 2002 23:44:45 -0900 X-Mailer: KMail [version 1.3] Cc: questions@freebsd.org References: <20020304074559.R24153-100000@adeon.lublin.pl> In-Reply-To: <20020304074559.R24153-100000@adeon.lublin.pl> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20020304084445.AEBFEB2ED@nebula.anchoragerescue.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sunday 03 March 2002 09:49 pm, Jarek Granat wrote: > > Sig 11's usually mean hardware problems. Bad RAM is the usual culprit, > > but also check that your CPU isn't overheating, and try another modem if > > you have one. I've also seen a lot of this problem with overclocked > > processors. You might want to do a google search on "signal 11" there is > > troubleshooting info available, I just don't remember the exact site. > > I found good website - thanks. > > It could be CPU or memory problems... > Do you know any benchmarks to detect problems??? > Now I can't turn of server, but I try it soon. > > I also have strange kernel's compile errors (warnings). > Could it be the samehardware problem? > > > Thanks, I can't tell you much about the kernel warnings without actually seeing the messages, but generally warnings that do not result in a fatal error aren't anything to worry about. As for benchmarks there are several in the ports collection, but in my experience doing a make world stresses the RAM about as well as can be done while it's still in the machine. I usually just swap strips with a known good one until the sig 11's quit. You can also take the strips in to your local computer shop and have them tested on a machine. Since it's ppp that's going belly up I would take a good look at your modem. Try swapping it with another one and see if it cures your problem. Switch serial ports if you have another. And as an afterthought check your cables (inside and out) a loose connection to the motherboard can cause the problem your seeing as well. Good Luck, Beech -- ------------------------------------------------------------------- Beech Rintoul - IT Manager - Instructor - akbeech@anchoragerescue.org /"\ ASCII Ribbon Campaign | Anchorage Gospel Rescue Mission \ / - NO HTML/RTF in e-mail | P.O. Box 230510 X - NO Word docs in e-mail | Anchorage, AK 99523-0510 / \ ----------------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message