From owner-freebsd-acpi@FreeBSD.ORG Mon Sep 17 12:17:00 2007 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 4E8F016A417 for ; Mon, 17 Sep 2007 12:17:00 +0000 (UTC) (envelope-from rp@tns.cz) Received: from bns.tns.cz (bns.tns.cz [213.194.214.115]) by mx1.freebsd.org (Postfix) with ESMTP id C03FA13C4B0 for ; Mon, 17 Sep 2007 12:16:58 +0000 (UTC) (envelope-from rp@tns.cz) Received: from bns.tns.cz (localhost [127.0.0.1]) by bns.tns.cz (Postfix) with ESMTP id 49C6C55E401 for ; Mon, 17 Sep 2007 13:53:19 +0200 (CEST) Received: from belzebub.tns.cz (belzebub [192.168.144.3]) by bns.tns.cz with ESMTP id 4DSJALT00018WYQ5JAG; Mon, 17 Sep 2007 13:53:19 +0200 (CEST) Received: by belzebub.tns.cz (Postfix, from userid 1001) id 3AA2216AB55; Mon, 17 Sep 2007 13:56:01 +0200 (CEST) Date: Mon, 17 Sep 2007 13:56:01 +0200 From: Roman Pavlik To: freebsd-acpi@freebsd.org Message-ID: <20070917115601.GA1371@belzebub.tns.cz> MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="AhhlLboLdkugWU4S" Content-Disposition: inline Content-Transfer-Encoding: 8bit User-Agent: Mutt/1.5.12-2006-07-14 Subject: HP6710: 7-current can't boot with enabled acpi X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 17 Sep 2007 12:17:00 -0000 --AhhlLboLdkugWU4S Content-Type: text/plain; charset=iso-8859-2 Content-Disposition: inline Content-Transfer-Encoding: 8bit FreeBSD 7-current, snap 200708 can't boot on Compaq/HP 6710b laptop with ACPI enabled. The boot process ends with acpi_tz0: _AC4: temperature 65.0 >= setpoint 30.0 acpi_tz0: _AC3: temperature 65.0 >= setpoint 40.0 acpi_tz0: _AC2: temperature 65.0 >= setpoint 50.0 which indefinitely loops. However manual escape to debugger is possible. Without acpi it works fine. There is no problem with FreeBSD 6.x release even with ACPI enabled. The attached files: - hp6710-6.1_frenzy.acpion.dmesg (boot -v on 6.1-frenzy with ACPI) - hp6710-7cur-acpioff.dmesg (boot -v on 7-current without ACPI) - hp6710-7cur-acpion.dmesg (transcript of boot -v on 7-current (warning! made by hand)) - rp-hp6710b.asl (acpidump -dt) is located at: http://www.tns.cz/~rp/rp-hp6710b.asl There is another problem on this machine (I'm not sure if it is connected with ACPI problem): It froze during boot if the integrated LAN is enabled in the BIOS (it is BroadCom NetLink Gigabyte adapter - the driver for it is not in 6.2 release but was already added to STABLE branch). Thank you for advice, -- Roman Pavlík --AhhlLboLdkugWU4S Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="hp6710-6.1_frenzy.acpion.dmesg" found-> vendor=0x8086, dev=0x2a03, revid=0x0c bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 map[10]: type 1, range 64, base e4700000, size 20, enabled found-> vendor=0x8086, dev=0x2834, revid=0x03 bus=0, slot=26, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type 4, range 32, base 00004020, size 5, enabled pcib0: matched entry for 0.26.INTA pcib0: slot 26 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2835, revid=0x03 bus=0, slot=26, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type 4, range 32, base 00004040, size 5, enabled pcib0: matched entry for 0.26.INTB pcib0: slot 26 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x283a, revid=0x03 bus=0, slot=26, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base e4800000, size 10, enabled pcib0: matched entry for 0.26.INTC pcib0: slot 26 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x284b, revid=0x03 bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 64, base e4804000, size 14, enabled pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x283f, revid=0x03 bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2841, revid=0x03 bus=0, slot=28, func=1 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 pcib0: matched entry for 0.28.INTB pcib0: slot 28 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x2843, revid=0x03 bus=0, slot=28, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 pcib0: matched entry for 0.28.INTC pcib0: slot 28 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x2847, revid=0x03 bus=0, slot=28, func=4 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2830, revid=0x03 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type 4, range 32, base 00004060, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x2831, revid=0x03 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type 4, range 32, base 00004080, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 21 found-> vendor=0x8086, dev=0x2832, revid=0x03 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[20]: type 4, range 32, base 000040a0, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x2836, revid=0x03 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base e4808000, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x2448, revid=0xf3 bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2815, revid=0x03 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2850, revid=0x03 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type 4, range 32, base 000040c0, size 4, enabled pcib0: matched entry for 0.31.INTA pcib0: slot 31 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2829, revid=0x03 bus=0, slot=31, func=2 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 4 messages map[10]: type 4, range 32, base 000013f0, size 3, enabled map[14]: type 4, range 32, base 000015f4, size 2, enabled map[18]: type 4, range 32, base 00001370, size 3, enabled map[1c]: type 4, range 32, base 00001574, size 2, enabled map[20]: type 4, range 32, base 00004100, size 5, enabled map[24]: type 1, range 32, base e4809000, size 11, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 17 pci0: at device 2.0 (no driver attached) pci0: at device 2.1 (no driver attached) uhci0: port 0x4020-0x403f irq 16 at device 26.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4020 ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x4040-0x405f irq 17 at device 26.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4040 ioapic0: routing intpin 17 (PCI IRQ 17) to vector 50 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ehci0: mem 0xe4800000-0xe48003ff irq 18 at device 26.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xe4800000 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51 ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: on ehci0 usb2: USB revision 2.0 uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 4 ports with 4 removable, self powered pci0: at device 27.0 (no driver attached) pcib1: irq 16 at device 28.0 on pci0 pcib1: secondary bus 8 pcib1: subordinate bus 8 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xfff00000-0xfffff pcib1: prefetched decode 0xfff00000-0xfffff pci8: on pcib1 pci8: physical bus=8 pcib2: irq 17 at device 28.1 on pci0 pcib2: secondary bus 16 pcib2: subordinate bus 16 pcib2: I/O decode 0xf000-0xfff pcib2: memory decode 0xe4100000-0xe41fffff pcib2: prefetched decode 0xfff00000-0xfffff pci16: on pcib2 pci16: physical bus=16 found-> vendor=0x8086, dev=0x4222, revid=0x02 bus=16, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 32, base e4100000, size 12, enabled pcib2: (null) requested memory range 0xe4100000-0xe4100fff: good pcib2: matched entry for 16.0.INTA pcib2: slot 0 INTA hardwired to IRQ 17 pci16: at device 0.0 (no driver attached) pcib3: irq 18 at device 28.2 on pci0 pcib3: secondary bus 24 pcib3: subordinate bus 24 pcib3: I/O decode 0xf000-0xfff pcib3: memory decode 0xe4000000-0xe40fffff pcib3: prefetched decode 0xfff00000-0xfffff pci24: on pcib3 pci24: physical bus=24 found-> vendor=0x14e4, dev=0x1693, revid=0x02 bus=24, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 64, base e4000000, size 16, enabled pcib3: (null) requested memory range 0xe4000000-0xe400ffff: good pcib3: matched entry for 24.0.INTA pcib3: slot 0 INTA hardwired to IRQ 18 pci24: at device 0.0 (no driver attached) pcib4: irq 16 at device 28.4 on pci0 pcib4: secondary bus 40 pcib4: subordinate bus 40 pcib4: I/O decode 0x2000-0x3fff pcib4: memory decode 0xe0000000-0xe3ffffff pcib4: prefetched decode 0xfff00000-0xfffff pci40: on pcib4 pci40: physical bus=40 uhci2: port 0x4060-0x407f irq 20 at device 29.0 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4060 ioapic0: routing intpin 20 (PCI IRQ 20) to vector 52 uhci2: [GIANT-LOCKED] usb3: on uhci2 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered uhci3: port 0x4080-0x409f irq 21 at device 29.1 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4080 ioapic0: routing intpin 21 (PCI IRQ 21) to vector 53 uhci3: [GIANT-LOCKED] usb4: on uhci3 usb4: USB revision 1.0 uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub4: 2 ports with 2 removable, self powered uhci4: port 0x40a0-0x40bf irq 18 at device 29.2 on pci0 uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x40a0 uhci4: [GIANT-LOCKED] usb5: on uhci4 usb5: USB revision 1.0 uhub5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub5: 2 ports with 2 removable, self powered ehci1: mem 0xe4808000-0xe48083ff irq 20 at device 29.7 on pci0 ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xe4808000 ehci1: [GIANT-LOCKED] usb6: EHCI version 1.0 usb6: companion controllers, 2 ports each: usb3 usb4 usb5 usb6: on ehci1 usb6: USB revision 2.0 uhub6: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub6: 6 ports with 6 removable, self powered pcib5: at device 30.0 on pci0 pcib5: secondary bus 2 pcib5: subordinate bus 3 pcib5: I/O decode 0xf000-0xfff pcib5: memory decode 0xe4200000-0xe45fffff pcib5: prefetched decode 0xfff00000-0xfffff pcib5: Subtractively decoded bridge. pci2: on pcib5 pci2: physical bus=2 found-> vendor=0x1180, dev=0x0476, revid=0xb6 bus=2, slot=4, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base e4200000, size 12, enabled pcib5: (null) requested memory range 0xe4200000-0xe4200fff: good pcib5: matched entry for 2.4.INTA pcib5: slot 4 INTA hardwired to IRQ 16 found-> vendor=0x1180, dev=0x0832, revid=0x02 bus=2, slot=4, func=1 class=0c-00-10, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=b, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base e4201000, size 11, enabled pcib5: (null) requested memory range 0xe4201000-0xe42017ff: good pcib5: matched entry for 2.4.INTB pcib5: slot 4 INTB hardwired to IRQ 17 cbb0: mem 0xe4200000-0xe4200fff irq 16 at device 4.0 on pci2 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe4200000 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0x04761180 0x02100007 0x060700b6 0x00824000 0x10: 0xe4200000 0x020000dc 0x20030302 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07000110 0x40: 0x30c0103c 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x30a00001 0x00000000 0x04630463 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000008 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0xba000000 0x00003000 0x00000000 0xc0: 0x30c0103c 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 fwohci0: vendor=1180, dev=832 fwohci0: vendor=1180, dev=832 fwohci0: <1394 Open Host Controller Interface> mem 0xe4201000-0xe42017ff irq 17 at device 4.1 on pci2 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xe4201000 fwohci0: [GIANT-LOCKED] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:02:3f:99:29:4d:3b:0e fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 dcons_crom0: on firewire0 dcons_crom0: bus_addr 0x7d05b000 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:02:3f:4d:3b:0e fwe0: bpf attached fwe0: Ethernet address: 02:02:3f:4d:3b:0e sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40c0-0x40cf irq 16 at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x40c0 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=00 stat1=00 devices=0x4 ioapic0: routing intpin 14 (ISA IRQ 14) to vector 54 ata0: [MPSAFE] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ioapic0: routing intpin 15 (ISA IRQ 15) to vector 55 ata1: [MPSAFE] pci0: at device 31.2 (no driver attached) battery0: on acpi0 battery1: on acpi0 acpi_acad0: on acpi0 acpi_button0: on acpi0 acpi_lid0: on acpi0 acpi_tz0: on acpi0 acpi_tz0: _CRT value is absurd, ignored (256.0C) acpi_tz1: on acpi0 acpi_tz2: on acpi0 acpi_tz3: on acpi0 acpi_tz4: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: irq 12 on acpi0 psm0: current command byte:0065 psm0: irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to vector 57 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: port 0x378-0x37f,0x778-0x77a irq 7 drq 1 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: on ppc0 plip0: on ppbus0 plip0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 ioapic0: routing intpin 7 (ISA IRQ 7) to vector 58 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it ppc: ppc0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete arl: in identify arl: free mem vector = 0xffff arl0: not found at 0xc0000 arl0: not found at 0xc2000 arl0: not found at 0xc4000 arl0: not found at 0xc6000 arl0: not found at 0xc8000 arl0: not found at 0xca000 arl0: not found at 0xcc000 arl0: not found at 0xce000 arl0: not found at 0xd0000 arl0: not found at 0xd2000 arl0: not found at 0xd4000 arl0: not found at 0xd6000 arl0: not found at 0xd8000 arl0: not found at 0xda000 arl0: not found at 0xdc000 arl0: not found at 0xde000 ex_isa_identify() sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: at iomem 0xd0000-0xd0fff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0x4ea1 0x4ea1 0x4ea1 0x4ea1 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding ioapic0: routing intpin 4 (ISA IRQ 4) to vector 59 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x4ea1 0x4ea1 0x4ea1 0x4ea1 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices ubt0: Broadcom Corp HP Integrated Module, rev 2.00/1.00, addr 2 ubt0: Broadcom Corp HP Integrated Module, rev 2.00/1.00, addr 2 ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2 ubt0: Interface 1 (alt.config 4) endpoints: isoc-in=0x83, isoc-out=0x3; wMaxPacketSize=64; nframes=5, buffer size=320 ugen0: vendor 0x08ff Fingerprint Sensor, rev 1.10/6.23, addr 2 Device configuration finished. Reducing kern.maxvnodes 133593 -> 100000 procfs registered lapic: Divisor 2, Frequency 99750387 hz Timecounter "TSC" frequency 2194523683 Hz quality 800 Timecounters tick every 1.000 msec crypto: crypto: assign driver 0, flags 6 crypto: driver 0 registers alg 1 flags 0 maxoplen 0 crypto: driver 0 registers alg 2 flags 0 maxoplen 0 crypto: driver 0 registers alg 3 flags 0 maxoplen 0 crypto: driver 0 registers alg 4 flags 0 maxoplen 0 crypto: driver 0 registers alg 5 flags 0 maxoplen 0 crypto: driver 0 registers alg 17 flags 0 maxoplen 0 crypto: driver 0 registers alg 6 flags 0 maxoplen 0 crypto: driver 0 registers alg 7 flags 0 maxoplen 0 crypto: driver 0 registers alg 15 flags 0 maxoplen 0 crypto: driver 0 registers alg 8 flags 0 maxoplen 0 crypto: driver 0 registers alg 16 flags 0 maxoplen 0 crypto: driver 0 registers alg 9 flags 0 maxoplen 0 crypto: driver 0 registers alg 10 flags 0 maxoplen 0 crypto: driver 0 registers alg 13 flags 0 maxoplen 0 crypto: driver 0 registers alg 14 flags 0 maxoplen 0 crypto: driver 0 registers alg 11 flags 0 maxoplen 0 crypto: driver 0 registers alg 18 flags 0 maxoplen 0 IPv6 packet filtering initialized, default to accept, logging limited to 100 packets/entry IPsec: Initialized Security Association Processing. ncp_load: loaded lo0: bpf attached ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default rr232x: no controller detected. md0: Preloaded image 2097152 bytes at 0xc0d230bc acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 0 dev 28 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 0 dev 28 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 0 dev 28 func 2 battery0: battery initialization start battery0: battery initialization done, tried 1 times battery1: battery initialization start acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times acpi_tz0: _AC4: temperature 65.0 >= setpoint 35.0 acpi_tz0: _AC3: temperature 65.0 >= setpoint 45.0 acpi_tz0: _AC2: temperature 65.0 >= setpoint 55.0 acpi_tz0: _AC1: temperature 65.0 >= setpoint 65.0 acpi_tz0: switched from NONE to _AC1: 65.0C ata0-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire acpi_tz0: _AC4: temperature 65.0 >= setpoint 35.0 acpi_tz0: _AC3: temperature 65.0 >= setpoint 45.0 acpi_tz0: _AC2: temperature 65.0 >= setpoint 55.0 acpi_tz0: _CRT value is absurd, ignored (256.0C) acpi_tz0: _AC4: temperature 65.0 >= setpoint 30.0 acpi_tz0: _AC3: temperature 65.0 >= setpoint 40.0 acpi_tz0: _AC2: temperature 65.0 >= setpoint 50.0 acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 0 dev 28 func 4 acd0: DVDR drive at ata0 as master acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-R 120mm data disc (probe7:ata0:0:0:0): error 22 (probe7:ata0:0:0:0): Unretryable Error (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error pass0 at ata0 bus 0 target 0 lun 0 pass0: Removable CD-ROM SCSI-0 device pass0: 16.000MB/s transfers GEOM: new disk cd0 ATA PseudoRAID loaded cd0 at ata0 bus 0 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: cd present [129547 x 2048 byte records] Trying to mount root from ufs:/dev/md0 start_init: trying /sbin/init md1.uzip: 5547 x 130560 blocks acpi_tz0: _AC4: temperature 65.0 >= setpoint 30.0 acpi_tz0: _AC3: temperature 65.0 >= setpoint 40.0 acpi_tz0: _AC2: temperature 65.0 >= setpoint 50.0 acpi_tz0: _AC4: temperature 65.0 >= setpoint 30.0 acpi_tz0: _AC3: temperature 65.0 >= setpoint 40.0 acpi_tz0: _AC2: temperature 65.0 >= setpoint 50.0 acpi_tz0: _AC4: temperature 60.0 >= setpoint 30.0 acpi_tz0: _AC3: temperature 60.0 >= setpoint 40.0 acpi_tz0: _AC2: temperature 60.0 >= setpoint 50.0 acpi_tz0: _AC4: temperature 60.0 >= setpoint 30.0 acpi_tz0: _AC3: temperature 60.0 >= setpoint 40.0 acpi_tz0: _AC2: temperature 60.0 >= setpoint 50.0 acpi_tz0: _CRT value is absurd, ignored (256.0C) acpi_tz0: _AC4: temperature 60.0 >= setpoint 30.0 acpi_tz0: _AC3: temperature 60.0 >= setpoint 40.0 acpi_tz0: _AC2: temperature 60.0 >= setpoint 50.0 acpi_tz0: switched from _AC1 to _AC2: 60.0C acpi_tz0: _AC4: temperature 60.0 >= setpoint 30.0 acpi_tz0: _AC3: temperature 60.0 >= setpoint 40.0 acpi_tz0: _AC4: temperature 60.0 >= setpoint 30.0 acpi_tz0: _AC3: temperature 60.0 >= setpoint 40.0 acpi_tz0: _AC4: temperature 65.0 >= setpoint 30.0 acpi_tz0: _AC3: temperature 65.0 >= setpoint 40.0 acpi_tz0: _AC1: temperature 65.0 >= setpoint 65.0 acpi_tz0: switched from _AC2 to _AC1: 65.0C acpi_tz0: _AC4: temperature 65.0 >= setpoint 30.0 acpi_tz0: _AC3: temperature 65.0 >= setpoint 40.0 acpi_tz0: _AC2: temperature 65.0 >= setpoint 50.0 acpi_tz0: _CRT value is absurd, ignored (256.0C) acpi_tz0: _AC4: temperature 65.0 >= setpoint 30.0 acpi_tz0: _AC3: temperature 65.0 >= setpoint 40.0 acpi_tz0: _AC2: temperature 65.0 >= setpoint 50.0 acpi_tz0: _AC4: temperature 60.0 >= setpoint 30.0 acpi_tz0: _AC3: temperature 60.0 >= setpoint 40.0 acpi_tz0: _AC2: temperature 60.0 >= setpoint 50.0 acpi_tz0: _AC4: temperature 60.0 >= setpoint 30.0 acpi_tz0: _AC3: temperature 60.0 >= setpoint 40.0 acpi_tz0: _AC2: temperature 60.0 >= setpoint 50.0 acpi_tz0: _CRT value is absurd, ignored (256.0C) acpi_tz0: _AC4: temperature 60.0 >= setpoint 30.0 acpi_tz0: _AC3: temperature 60.0 >= setpoint 40.0 acpi_tz0: _AC2: temperature 60.0 >= setpoint 50.0 acpi_tz0: switched from _AC1 to _AC2: 60.0C fuse4bsd: version 0.3.0, FUSE ABI 7.5 acpi_tz0: _AC4: temperature 60.0 >= setpoint 30.0 acpi_tz0: _AC3: temperature 60.0 >= setpoint 40.0 pcib5: pccard0 requested memory range 0xe4200000-0xe45fffff: good pccard0: CIS version PCCARD 2.0 or 2.1 pccard0: CIS info: PCMCIA, Ethernet, , pccard0: Manufacturer code 0xffffffff, product 0xffffffff pccard0: function 0: network adapter, ccr addr 3f8 mask 3 pccard0: function 0, config table entry 32: I/O card; irq mask ffff; iomask a, iospace 300-31f; mwait_required io16 irqlevel pccard0: function 0, config table entry 33: I/O card; irq mask ffff; iomask a, iospace 320-33f; mwait_required io16 irqlevel pccard0: function 0, config table entry 34: I/O card; irq mask ffff; iomask a, iospace 340-35f; mwait_required io16 irqlevel pccard0: function 0, config table entry 35: I/O card; irq mask ffff; iomask a, iospace 360-37f; mwait_required io16 irqlevel pcib5: pccard0 requested memory range 0xe4200000-0xe45fffff: good cnw0: Cannot allocate attribute memory acpi_tz0: _AC4: temperature 60.0 >= setpoint 30.0 acpi_tz0: _AC3: temperature 60.0 >= setpoint 40.0 battery1: battery initialization failed, giving up acpi_tz0: _AC4: temperature 60.0 >= setpoint 30.0 acpi_tz0: _AC3: temperature 60.0 >= setpoint 40.0 acpi_tz0: _AC4: temperature 60.0 >= setpoint 30.0 acpi_tz0: _AC3: temperature 60.0 >= setpoint 40.0 acpi_tz0: _AC4: temperature 60.0 >= setpoint 30.0 acpi_tz0: _AC3: temperature 60.0 >= setpoint 40.0 --AhhlLboLdkugWU4S Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="hp6710-7cur-acpioff.dmesg" Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-CURRENT-200708 #3: Tue Sep 11 14:25:36 CEST 2007 root@belzebub.tns.cz:/usr/src/sys/i386/compile/BELZEBUB Preloaded elf kernel "/boot/kernel/kernel" at 0xc098d000. APIC: Could not find any APICs. Calibrating clock(s) ... i8254 clock: 1193178 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2194517149 Hz CPU: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz (2194.52-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6fa Stepping = 10 Features=0xbfebfbff Features2=0xe3bd AMD Features=0x20100000 AMD Features2=0x1 Cores per package: 2 Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size L2 cache: 4096 kbytes, 16-way associative, 64 bytes/line real memory = 2138767360 (2039 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c28000 - 0x000000007d384fff, 2088095744 bytes (509789 pages) avail memory = 2087628800 (1990 MB) bios32: Found BIOS32 Service Directory header at 0xc00fa000 bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x322 pnpbios: Found PnP BIOS data at 0xc00f53a0 pnpbios: Entry = f0000:53ce Rev = 1.0 pnpbios: Event flag at f53c6 pnpbios: OEM ID c0303c10 Other BIOS signatures found: wlan_amrr: wlan: <802.11 Link Layer> random: kbd: new array size 4 kbd1 at kbdmux0 mem: Pentium Pro MTRR support enabled io: null: npx0: INT 16 interface cpu0 on motherboard est0: on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 6120c2e06000c2e device_attach: est0 attach returned 6 p4tcc0: on cpu0 pci_open(1): mode 1 addr port (0x0cf8) is 0x8000fa20 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=2a008086) pcibios: BIOS version 2.10 pcib0: pcibus 0 on motherboard pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x2a00, revid=0x0c bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2a02, revid=0x0c bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 64, base 0xe4400000, size 20, enabled map[18]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled map[20]: type I/O Port, range 32, base 0x4000, size 3, enabled found-> vendor=0x8086, dev=0x2a03, revid=0x0c bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 map[10]: type Memory, range 64, base 0xe4500000, size 20, enabled found-> vendor=0x8086, dev=0x2834, revid=0x03 bus=0, slot=26, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type I/O Port, range 32, base 0x4020, size 5, enabled found-> vendor=0x8086, dev=0x2835, revid=0x03 bus=0, slot=26, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type I/O Port, range 32, base 0x4040, size 5, enabled found-> vendor=0x8086, dev=0x283a, revid=0x03 bus=0, slot=26, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xe4600000, size 10, enabled found-> vendor=0x8086, dev=0x284b, revid=0x03 bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xe4604000, size 14, enabled found-> vendor=0x8086, dev=0x283f, revid=0x03 bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2841, revid=0x03 bus=0, slot=28, func=1 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2847, revid=0x03 bus=0, slot=28, func=4 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2830, revid=0x03 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type I/O Port, range 32, base 0x4060, size 5, enabled found-> vendor=0x8086, dev=0x2831, revid=0x03 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type I/O Port, range 32, base 0x4080, size 5, enabled found-> vendor=0x8086, dev=0x2832, revid=0x03 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[20]: type I/O Port, range 32, base 0x40a0, size 5, enabled found-> vendor=0x8086, dev=0x2836, revid=0x03 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xe4608000, size 10, enabled found-> vendor=0x8086, dev=0x2448, revid=0xf3 bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2815, revid=0x03 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2850, revid=0x03 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type I/O Port, range 32, base 0x40c0, size 4, enabled found-> vendor=0x8086, dev=0x2829, revid=0x03 bus=0, slot=31, func=2 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 4 messages map[10]: type I/O Port, range 32, base 0x13f0, size 3, enabled map[14]: type I/O Port, range 32, base 0x15f4, size 2, enabled map[18]: type I/O Port, range 32, base 0x1370, size 3, enabled map[1c]: type I/O Port, range 32, base 0x1574, size 2, enabled map[20]: type I/O Port, range 32, base 0x4100, size 5, enabled map[24]: type Memory, range 32, base 0xe4609000, size 11, enabled vgapci0: port 0x4000-0x4007 mem 0xe4400000-0xe44fffff,0xd0000000-0xdfffffff irq 10 at device 2.0 on pci0 agp0: on vgapci0 vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xd0000000 vgapci0: Reserved 0x100000 bytes for rid 0x10 type 3 at 0xe4400000 agp0: detected 7676k stolen memory agp0: aperture size is 256M vgapci1: mem 0xe4500000-0xe45fffff at device 2.1 on pci0 uhci0: port 0x4020-0x403f irq 10 at device 26.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4020 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: on uhci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x4040-0x405f irq 10 at device 26.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4040 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: on uhci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 2 ports with 2 removable, self powered ehci0: mem 0xe4600000-0xe46003ff irq 11 at device 26.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xe4600000 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: on ehci0 usb2: USB revision 2.0 uhub2: on usb2 uhub2: 4 ports with 4 removable, self powered pci0: at device 27.0 (no driver attached) pcib1: irq 10 at device 28.0 on pci0 pcib1: secondary bus 8 pcib1: subordinate bus 8 pcib1: I/O decode 0xf000-0xfff pcib1: no prefetched decode pci8: on pcib1 pci8: physical bus=8 pcib2: irq 10 at device 28.1 on pci0 pcib2: secondary bus 16 pcib2: subordinate bus 16 pcib2: I/O decode 0xf000-0xfff pcib2: memory decode 0xe4000000-0xe40fffff pcib2: no prefetched decode pci16: on pcib2 pci16: physical bus=16 found-> vendor=0x8086, dev=0x4222, revid=0x02 bus=16, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xe4000000, size 12, enabled pcib2: requested memory range 0xe4000000-0xe4000fff: good pci16: at device 0.0 (no driver attached) pcib3: irq 10 at device 28.4 on pci0 pcib3: secondary bus 40 pcib3: subordinate bus 40 pcib3: I/O decode 0x2000-0x3fff pcib3: memory decode 0xe0000000-0xe3ffffff pcib3: no prefetched decode pci40: on pcib3 pci40: physical bus=40 uhci2: port 0x4060-0x407f irq 10 at device 29.0 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4060 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb3: on uhci2 usb3: USB revision 1.0 uhub3: on usb3 uhub3: 2 ports with 2 removable, self powered uhci3: port 0x4080-0x409f irq 10 at device 29.1 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4080 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb4: on uhci3 usb4: USB revision 1.0 uhub4: on usb4 uhub4: 2 ports with 2 removable, self powered uhci4: port 0x40a0-0x40bf irq 11 at device 29.2 on pci0 uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x40a0 uhci4: [GIANT-LOCKED] uhci4: [ITHREAD] usb5: on uhci4 usb5: USB revision 1.0 uhub5: on usb5 uhub5: 2 ports with 2 removable, self powered ehci1: mem 0xe4608000-0xe46083ff irq 10 at device 29.7 on pci0 ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xe4608000 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] usb6: waiting for BIOS to give up control usb6: EHCI version 1.0 usb6: companion controllers, 2 ports each: usb3 usb4 usb5 usb6: on ehci1 usb6: USB revision 2.0 uhub6: on usb6 uhub6: 6 ports with 6 removable, self powered pcib4: at device 30.0 on pci0 pcib4: secondary bus 2 pcib4: subordinate bus 3 pcib4: I/O decode 0xf000-0xfff pcib4: memory decode 0xe4100000-0xe43fffff pcib4: no prefetched decode pcib4: Subtractively decoded bridge. pci2: on pcib4 pci2: physical bus=2 found-> vendor=0x1180, dev=0x0476, revid=0xb6 bus=2, slot=4, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xe4100000, size 12, enabled pcib4: requested memory range 0xe4100000-0xe4100fff: good found-> vendor=0x1180, dev=0x0832, revid=0x02 bus=2, slot=4, func=1 class=0c-00-10, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=b, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xe4101000, size 11, enabled pcib4: requested memory range 0xe4101000-0xe41017ff: good cbb0: mem 0xe4100000-0xe4100fff irq 5 at device 4.0 on pci2 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe4100000 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: [ITHREAD] cbb0: PCI Configuration space: 0x00: 0x04761180 0x02100007 0x060700b6 0x00824000 0x10: 0xe4100000 0x020000dc 0x20030302 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07000105 0x40: 0x30c0103c 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x30a00001 0x00000000 0x04630463 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000008 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0xba000000 0x00003000 0x00000000 0xc0: 0x30c0103c 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 0xe0: 0x24c0c000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 fwohci0: vendor=1180, dev=832 fwohci0: vendor=1180, dev=832 fwohci0: <1394 Open Host Controller Interface> mem 0xe4101000-0xe41017ff irq 10 at device 4.1 on pci2 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xe4101000 fwohci0: [MPSAFE] fwohci0: [FILTER] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:02:3f:99:29:4d:3b:0e fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwip0: on firewire0 fwip0: bpf attached fwip0: Firewire address: 00:02:3f:99:29:4d:3b:0e @ 0xfffe00000000, S400, maxrec 2048 sbp0: on firewire0 dcons_crom0: on firewire0 dcons_crom0: bus_addr 0x1178000 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:02:3f:4d:3b:0e fwe0: bpf attached fwe0: Ethernet address: 02:02:3f:4d:3b:0e fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40c0-0x40cf irq 10 at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x40c0 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=00 stat1=00 devices=0x4 ata0: [MPSAFE] ata0: [ITHREAD] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ata1: [MPSAFE] ata1: [ITHREAD] atapci1: port 0x13f0-0x13f7,0x15f4-0x15f7,0x1370-0x1377,0x1574-0x1577,0x4100-0x411f mem 0xe4609000-0xe46097ff irq 10 at device 31.2 on pci0 atapci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4100 atapci1: [MPSAFE] atapci1: [ITHREAD] atapci1: Reserved 0x800 bytes for rid 0x24 type 3 at 0xe4609000 atapci1: AHCI Version 01.10 controller with 3 ports detected ata2: on atapci1 ata2: SATA connect time=0ms ata2: [MPSAFE] ata2: [ITHREAD] ata3: on atapci1 ata3: port not implemented ata3: [MPSAFE] ata3: [ITHREAD] ata4: on atapci1 ata4: port not implemented ata4: [MPSAFE] ata4: [ITHREAD] ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete pnpbios: 13 devices, largest 250 bytes PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0 PNP0c04: adding irq mask 0x2000 pnpbios: handle 1 device ID PNP0c04 (040cd041) PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=0x20000 PNP0c01: adding fixed memory32 range 0x100000-0x7f7fffff, size=0x7f700000 pnpbios: handle 2 device ID PNP0c01 (010cd041) PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0 pnpbios: handle 3 device ID PNP0a03 (030ad041) PNP0200: adding io range 0-0xf, size=0x10, align=0 PNP0200: adding io range 0x80-0x8f, size=0x10, align=0 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0 PNP0200: adding dma mask 0x10 pnpbios: handle 5 device ID PNP0200 (0002d041) PNP0100: adding io range 0x40-0x43, size=0x4, align=0 PNP0100: adding irq mask 0x1 pnpbios: handle 6 device ID PNP0100 (0001d041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0 pnpbios: handle 7 device ID PNP0800 (0008d041) PNP0b00: adding io range 0x70-0x71, size=0x2, align=0 PNP0b00: adding io range 0x72-0x72, size=0x1, align=0 PNP0b00: adding io range 0x73-0x73, size=0x1, align=0 PNP0b00: adding irq mask 0x100 pnpbios: handle 8 device ID PNP0b00 (000bd041) PNP0303: adding io range 0x60-0x60, size=0x1, align=0 PNP0303: adding io range 0x64-0x64, size=0x1, align=0 PNP0303: adding irq mask 0x2 pnpbios: handle 9 device ID PNP0303 (0303d041) PNP0f13: adding irq mask 0x1000 pnpbios: handle 10 device ID PNP0f13 (130fd041) PNP0401: adding irq mask 0x80 PNP0401: adding dma mask 0x2 PNP0401: adding io range 0x378-0x37f, size=0x8, align=0 PNP0401: adding io range 0x778-0x77a, size=0x3, align=0 pnpbios: handle 11 device ID PNP0401 (0104d041) pnpbios: handle 12 device ID PNP0501 (0105d041) PNP0c02: adding fixed memory32 range 0xfff0000-0x100effff, size=0x100000 PNP0c02: adding fixed memory32 range 0xffb0000-0x100b03ff, size=0x100400 PNP0c02: adding io range 0x10-0x1f, size=0x10, align=0 PNP0c02: adding io range 0x24-0x3f, size=0x1c, align=0 PNP0c02: adding io range 0x4e-0x4f, size=0x2, align=0 PNP0c02: adding io range 0x50-0x53, size=0x4, align=0 PNP0c02: adding io range 0x68-0x6f, size=0x8, align=0 PNP0c02: adding io range 0x74-0x77, size=0x4, align=0 PNP0c02: adding io range 0x92-0x92, size=0x1, align=0 PNP0c02: adding io range 0x93-0x9f, size=0xd, align=0 PNP0c02: adding io range 0xa4-0xbd, size=0x1a, align=0 PNP0c02: adding io range 0x510-0x51f, size=0x10, align=0 PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0 PNP0c02: adding io range 0x1000-0x107f, size=0x80, align=0 PNP0c02: adding io range 0x1100-0x112f, size=0x30, align=0 PNP0c02: adding io range 0x1200-0x121f, size=0x20, align=0 pnpbios: handle 13 device ID PNP0c02 (020cd041) sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0065 psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: on ppc0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0xc01 0xc01 0xc01 0xc01 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0xc01 0xc01 0xc01 0xc01 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0xc01 0xc01 0xc01 0xc01 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices unknown: can't assign resources (memory) unknown: at iomem 0-0x9ffff pnpid PNP0c01 on isa0 unknown: failed to probe at port 0x61 pnpid PNP0800 on isa0 unknown: can't assign resources (port) unknown: at port 0x60 pnpid PNP0303 on isa0 unknown: can't assign resources (irq) unknown: at irq 12 pnpid PNP0f13 on isa0 unknown: can't assign resources (port) unknown: at port 0x378-0x37f pnpid PNP0401 on isa0 unknown: <16550A-compatible COM port> failed to probe pnpid PNP0501 on isa0 unknown: can't assign resources (memory) unknown: at iomem 0xfff0000-0x100effff pnpid PNP0c02 on isa0 ugen0: on uhub0 ugen1: on uhub3 Device configuration finished. Reducing kern.maxvnodes 133842 -> 100000 procfs registered Timecounter "TSC" frequency 2194517149 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attachedfirewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) ata0-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire acd0: DVDR drive at ata0 as master acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire ad4: 152627MB at ata2-master SATA150 ad4: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad4 pcib4: pccard0 requested memory range 0xe4100000-0xe43fffff: good pccard0: CIS version PCCARD 2.0 or 2.1 pccard0: CIS info: PCMCIA, Ethernet, , pccard0: Manufacturer code 0xffffffff, product 0xffffffff pccard0: function 0: network adapter, ccr addr 3f8 mask 3 pccard0: function 0, config table entry 32: I/O card; irq mask ffff; iomask a, iospace 300-31f; mwait_required io16 irqlevel pccard0: function 0, config table entry 33: I/O card; irq mask ffff; iomask a, iospace 320-33f; mwait_required io16 irqlevel pccard0: function 0, config table entry 34: I/O card; irq mask ffff; iomask a, iospace 340-35f; mwait_required io16 irqlevel pccard0: function 0, config table entry 35: I/O card; irq mask ffff; iomask a, iospace 360-37f; mwait_required io16 irqlevel interrupt storm detected on "irq5:"; throttling interrupt source pcib4: pccard0 requested memory range 0xe4100000-0xe43fffff: good ed1: at port 0x300-0x31f irq 5 function 0 config 32 on pccard0 ed1: [MPSAFE] ed1: [ITHREAD] ed1: CIS MAC 00:00:00:00:00:00 ROM DATA: 00 ff 00 ff b4 ff 4b ff 74 ff ea ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 57 ff 57 ff ed1: ROM mac 00:00:b4:4b:74:ea ed1: using obsoleted if_watchdog interface ed1: bpf attached ed1: Ethernet address: 00:00:b4:4b:74:ea ed1: type NE2000 (16 bit) ad4: Intel check1 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error ATA PseudoRAID loaded Trying to mount root from ufs:/dev/ad4s2a start_init: trying /sbin/init --AhhlLboLdkugWU4S Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="hp6710-7cur-acpion.dmesg" boot -v /boot/kernel/acpi.ko text=0x53998 date=0x2380+0x184c syms=[0x4+0x8580+0x4+0xb01e] GDB: no debug ports present KDB: debugger backeneds: ddb KDB: current backend: ddb SMAP type=01 base=0000000000000000 len=000000000009fc00 SMAP type=02 base=000000000009fc00 len=0000000000000400 SMAP type=02 base=00000000000e0000 len=0000000000020000 SMAP type=01 base=0000000000100000 len=000000007f6b0000 SMAP type=02 base=000000007f7b0000 len=0000000000015400 SMAP type=04 base=000000007f7c5400 len=0000000000022bb8 SMAP type=02 base=000000007f7e7fb8 len=0000000000018048 SMAP type=02 base=000000007f800000 len=0000000000800000 SMAP type=02 base=00000000fec00000 len=0000000000001000 SMAP type=02 base=00000000fed20000 len=0000000000070000 SMAP type=02 base=00000000fed90000 len=000000000000a000 SMAP type=02 base=00000000feda0000 len=0000000000020000 SMAP type=02 base=00000000fee00000 len=0000000000001000 SMAP type=02 base=00000000ffb00000 len=0000000000100000 SMAP type=02 base=00000000fff00000 len=0000000000100000 Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registred trademark of The FreeBSD Foundation. FreeBSD 7.0-CURRENT-200708 #3: Tue Sep 11 14:25:36 CEST 2007 root@belzebub.tns.cz:/usr/src/sys/i386/compile/BELZEBUB Preloaded elf kernel "/boot/kernel/kernel" at 0xc09f9000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc09f920c. Calibrating clock(s) ... i8254 clock: 1193197 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clokc ... TSC clock: 2194516984 Hz CPU: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz (2194.52-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6fa Stepping = 10 Features=0xbfebfbff Features2=0xe3bd AMD Features=0x20100000 AMD Features2=0x1 Cores per package: 2 Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size L2 cache: 4096 kbytes, 16-way associative, 64 bytes/line real memory = 2138767360 (2039 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c28000 - 0x000000007d384fff, 2088095744 bytes (509789 pages) avail memory = 2087612416 (1990 MB) Table 'FACP' at 0x7f7c8084 Table 'SLIC' at 0x7f7c8238 Table 'HPET' at 0x7f7c83b0 Table 'APIC' at 0x7f7c83e8 MADT: Found table at 0x7f7c83e8 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 2: enabled SMP: Added CPU 1 (AP) ACPI APIC Tbale: INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00fa000 bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x322 pnpbios: Found PnP BIOS data at 0xc00f5170 pnpbios: Entry = f0000:519e Rev = 1.0 pnpbios: event flag at f5196 pnpbios: OEM ID c0303c10 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 ACPI: RSDP @ 0x0xf7050/0x0024 (v 2 HP ) ACPI: XSDT @ 0x0x7f7c81c4/0x0074 (v 1 HPQOEM SLIC-MPC 0x00000001 HP 0x00000001) ACPI: FACP @ 0x0x7f7c8084/0x00F4 (v 4 HP 30c0 0x00000003 HP 0x00000001) ACPI: DSDT @ 0x0x7f7c84c0/0x12BE9 (v 1 HP nc75xx 0x00010000 MSFT 0x03000001) ACPI: FACS @ 0x0x7f7e7d80/0x0040 ACPI: SLIC @ 0x0x7f7c8238/0x0176 (v 1 HPQOEM SLIC-MPC 0x00000001 HP 0x00000001) ACPI: HPET @ 0x0x7f7x83b0/0x0038 (v 1 HP 30c0 0x00000001 HP 0x00000001) ACPI: APIC @ 0x0x7f7c83e8/0x0068 (v 1 HP 30c0 0x00000001 HP 0x00000001) ACPI: MCFG @ 0x0x7f7c8450/0x003C (v 1 HP 30c0 0x00000001 HP 0x00000001) ACPI: TCPA @ 0x0x7f7c848c/0x0032 (v 2 HP 30c0 0x00000001 HP 0x00000001) ACPI: SSDT @ 0x0x7f7db0a9/0x0328 (v 1 HP HPQSAT 0x00000001 MSFT 0x03000001) ACPI: SSDT @ 0x0x7f7dbc57/0x025F (v 1 HP Cpu0Tst 0x00003000 INTL 0x20060317) ACPI: SSDT @ 0x0x7f7dbeb6/0a00A6 (v 1 HP Cpu1Tst 0x00003000 INTL 0x20060317) ACPI: SSDT @ 0x0x7f7dbf5c/0x04D7 (v 1 HP CpuPm 0x00003000 INTL 0x20060317) MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 1 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Rouing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 triiger: level lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050013 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00000200 err: 0x00010000 pcm: 0x00010000 wlan_amrr: wlan: <802.11 Link Layer> kbd: new array size 4 kbd1 at kbdmux0 mem: Pentium Pro MTRR support enabled io: null: random: npx0: INT 16 interface acpi0: on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x8000fa20 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=2a008086) pcibios: BIOS version 2.10 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciID: \_SB_.C003.C111.C112 -> bus 0 dev 29 func 7 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciID: \_SB_.C003.C11B.C11C -> bus 0 dev 26 func 7 ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi_hpet0: iomem 0xfed0000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 1 hz: 14318180 opts: leg_route count_size Timecounter "HPET" frequency 14318180 Hz quality 900 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciID: \_SB_.C003.C09A -> bus 0 dev 0 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciID: \_SB_.C003.C0B0.C29B.C29C -> bus 2 dev 4 func 0 acpi0: Power Button (fixed) acpi0: wakeip code va 0xd8c75000 pa 0x1000 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciID: \_SB_.C003.C004.C0B7 -> bus 0 dev 31 func 0 acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7f700000 (3) failed ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545Mhz> port 0x1008-0x100b on acpi0 acpi_ec0: port 0x62,0x66 on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 10 11 Validation 0 255 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 10 11 Validation 0 10 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 10 11 Validation 0 11 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 10 11 Validation 0 255 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 10 11 Validation 0 10 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 10 11 Validation 0 10 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 10 11 Validation 0 255 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 none Validation 0 255 N 0 none After Disable 0 255 N 0 none cpu0: in acpi0 ACPI: SSDT @ 0x0x7f7db499/0x027F (v 1 HP Cpu0Ist 0x000030000 INSTL 0x20060317) ACPI: SSDT @ 0x0x7f7db79d/0x04BA (v 1 HP Cpu0Cst 0x000030001 INSTL 0x20060317) est0: on cpu0 p4tcc0: on cpu0 cpu1: on acpi0 ACPI: SSDT @ 0x0x7f7db3d1/0x00C8 (v 1 HP Cpu1Ist 0x000030000 INSTL 0x20060317) ACPI: SSDT @ 0x0x7f7db718/0x0085 (v 1 HP Cpu1Cst 0x000030000 INSTL 0x20060317) est1: on cpu1 p4tcc1: on cpu1 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x2a00, revid=0x0c bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2a02, revid=0x0c bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 64, base 0xe4400000, size 20, enabled map[18]: type Prefetchable Memory, range 64, base 0xd000000, size 28, enabled map[20]: type I/O Port, range 32, base 0x4000, size 3, enabled pcib0: matched entry for 0.2. INTA pcib0: slot 2 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2a03, revid=0x0c bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 map[10]: type Memory, range 64, base 0xe4500000, size 20, enabled found-> vendor=0x8086, dev=0x2834, revid=0x03 bus=0, slot=26, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message map[20]: type I/O Port, range 32, base 0x4020, size 5, enabled pcib0: matched entry for 0.26. INTA pcib0: slot 26 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2835, revid=0x03 bus=0, slot=26, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type I/O Port, range 32, base 0x4040, size 5, enabled pcib0: matched entry for 0.26. INTA pcib0: slot 26 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x283a, revid=0x03 bus=0, slot=26, func=7 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xe4600000, size 10, enabled pcib0: matched entry for 0.26. INTC pcib0: slot 26 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x284b, revid=0x03 bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xe4604000, size 14, enabled pcib0: matched entry for 0.27. INTA pcib0: slot 27 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x283f, revid=0x03 bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28. INTA pcib0: slot 28 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2841, revid=0x03 bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28. INTA pcib0: slot 28 INTA hardwired to IRQ 17 found-> vendor=0x8086, dev=0x2847, revid=0x03 bus=0, slot=28, func=4 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 MSI supports 1 message pcib0: matched entry for 0.28. INTA pcib0: slot 28 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2830, revid=0x03 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type I/O Port, range 32, base 0x4060, size 5, enabled pcib0: matched entry for 0.29. INTA pcib0: slot 29 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x2831, revid=0x03 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type I/O Port, range 32, base 0x4080, size 5, enabled pcib0: matched entry for 0.29. INTB pcib0: slot 29 INTB hardwired to IRQ 20 found-> vendor=0x8086, dev=0x2832, revid=0x03 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[20]: type I/O Port, range 32, base 0x40a0, size 5, enabled pcib0: matched entry for 0.29. INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x2836, revid=0x03 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xe4608000, size 10, enabled pcib0: matched entry for 0.29. INTA pcib0: slot 29 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x2448, revid=0xf3 bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2815, revid=0x03 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2850, revid=0x03 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[10]: type I/O Port, range 32, base 0x40c0, size 4, enabled pcib0: matched entry for 0.31. INTA pcib0: slot 31 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2829, revid=0x03 bus=0, slot=31, func=2 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x2829, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[10]: type I/O Port, range 32, base 0x13f0, size 3, enabled map[14]: type I/O Port, range 32, base 0x15f4, size 2, enabled map[18]: type I/O Port, range 32, base 0x1370, size 3, enabled map[1c]: type I/O Port, range 32, base 0x1574, size 2, enabled map[20]: type I/O Port, range 32, base 0x4100, size 5, enabled map[24]: type Memory, range 32, base 0xe4609000, size 11, enabled pcib0: matched entry for 0.31. INTB pcib0: slot 31 INTB hardwired to IRQ 17 vgapci0: port 0x4000-0x4007 mem 0xe4400000-0xe44fffff,0xd0000000-0xdfffffff agp0: on vgapci0 vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xd0000000 vgapci0: Reserved 0x100000 bytes for rid 0x10 type 3 at 0xe4400000 agp0: detected 7676k stolen memory agp0: aperture size is 256M vgapci1: mem 0xe4500000-0xe45fffff at device 2.1 on pci0 uhci0: port 0x4020-0x403f irq 16 at device 26.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4020 ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: on uhci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x4040/0x405f irq 17 at device 26.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4040 ioapic0: routing intpin 17 (PCI IRQ 17) to vector 50 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: on uhci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 2 ports with 2 removable, self powered ehci0: mem 0xe4600000-0xe46003ff irq 18 at device 26.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xe4600000 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each, usb0 usb1 usb2: on ehci0 usb2: USB revision 2.0 uhub2: on usb2 uhub2: 4 ports with 4 removable, self powered pci0: at device 27.0 (no driver attached) pcib1: irq 16 at device 28.0 on pci0 pcib1: secondary bus 8 pcib1: subordinate bus 8 pcib1: I/O decode 0xf000-0xfff pcib1: no prefetched decode pci8: on pcib1 pci8: physical bus=8 pcib2: irq 17 at device 28.1 on pci0 pcib2: secondary bus 16 pcib2: subordinate bus 16 pcib2: I/O decode 0xf000-0xfff pcib2: memory decode 0xe4000000-0xe40fffff pcib2: no prefetched decode pci16: on pcib2 pci16: physical bus=16 found-> vendor=0x8086, dev=0x4222, revid=0x02 bus=16, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map [10]: type Memory, range 32, base 0xe4000000, size 12, enabled pcib2: requested memory range 0xe4000000-0xe4000fff: good pcib2: matched entry for 16.0 INTA pcib2: slot 0 INTA hardwired to IRQ 17 pci16: at device 0.0 (no driver attached) pcib3: irq 16 at device 28.4 on pci0 pcib3: secondary bus 40 pcib3: subordinate bus 40 pcib3: I/O decode 0x2000-0x3fff pcib3: memory decode 0xe0000000-0xe3fffff pcib3: no prefetched decode pci40: on pcib3 pci40: physical bus=40 uhci2: port 0x4060-0x407f irq 20 at device 29.0 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4060 ioapic0: routing intpin 20 (PCI IRQ 20) to vector 52 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb3: on uhci2 usb3: USB revision 1.0 uhub3: on usb3 uhub3: 2 ports with 4 removable, self powered uhci3: port 0x4080-0x409f irq 21 at device 29.1 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4080 ioapic0: routing intpin 21 (PCI IRQ 21) to vector 53 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb4: on uhci3 usb4: USB revision 1.0 uhub4: on usb4 uhub4: 2 ports with 4 removable, self powered uhci4: port 0x40a0-0x40bf irq 18 at device 29.2 on pci0 uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x40a0 uhci4: [GIANT-LOCKED] uhci4: [ITHREAD] usb5: on uhci4 usb5: USB revision 1.0 uhub5: on usb5 uhub5: 2 ports with 2 removable, self powered ehci1: mem 0xe4608000-0xe46083ff irq 20 at device 29.7 on pci0 ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xe4608000 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] usb6: EHCI version 1.0 usb6: companion controllers, 2 ports each, usb3 usb4 usb5 usb6: on ehci1 usb6: USB revision 2.0 uhub6: on usb6 uhub6: 6 ports with 6 removable, self powered pcib4: at device 30.0 on pci0 pcib4: secondary bus 2 pcib4: subordinate bus 3 pcib4: I/O decode 0xf000-0xfff pcib4: memory decode 0xe4100000-0xe43ffff pcib4: no prefetched decode pcib4: Subtractively decode bridge. pci2: ob pcib4 pci2: physical bus=2 found-> vendor=0x1188, dev=0x0476, revid=0xb6 bus=2, slot=4, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map [10]: type Memory, range 32, base 0xe4100000, size 12, enabled pcib4: requested memory range 0xe4100000-0xe4100fff: good pcib4: matched entry for 2.4.INTB pcib4: slot 4 INTB hardwired to IRQ 17 cbb0: mem 0xe4100000-0xe4100fff irq 16 at device 4.0 on pci2 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe4100000 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on ccb0 cbb0: [MPSAFE] cbb0: [ITHREAD] cbb0: PCI Configuration sapce: 0x00: 0x04761180 0x20100007 0x060700b6 0x00824000 0x10: 0xe4100000 0x020000dc 0x20030302 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07000110 0x40: 0x30c0103c 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x30a00001 0x00000000 0x04630463 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000008 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0xba000000 0x00003000 0x00000000 0xc0: 0x30c0103c 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 0xe0: 0x24c0c000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 fwohci0: vendor=1180, dev=832 fwohci0: vendor=1180, dev=832 fwohci0: <1394 Open Host Controller Interface> mem 0xe4101000-0xe41017ff irq 17 at device 4.1 on pci2 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xe4101000 fwohci0: [MPSAFE] fwohci0: [ITHREAD] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:02:3f:99:29:4d:3b:0e fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400. max_rec 2048 bytes. firewire0: on fwohci0 sbp0: on firewire0 dcons_crom0: on firewire0 dcons_crom0: bus_addr 0x1160000 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:02:3f:4d:3b:0e fwe0: bpf attached fwe0: Ethernet address: 02:02:3f:4d:3b:0e fwip0: on firewire0 fwip0: bpf attached fwip0: Firewire address: 00:02:3f:99:29:4d:3b:0e @ 0xfffe00000000, S400, maxrec 2048 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CUCLEMASTER mode isab0: at device 31.0 on pci0 isab0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40c0-0x40cf irq 16 at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x40c0 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=00 stat1=00 devices=0x4 ioapic0: routing intpin 14 (ISA IRQ 14) to vector 54 ata0: [MPSAFE] ata0: [ITHREAD] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ata1: [MPSAFE] ata1: [ITHREAD] atapci1: port 0x13f0-0x13f7,0x15f4-0x15f7,0x1370-0x1377,0x1574-0x1577,0x4100-0x411f mem 0xe4609000-0xe46097ff irq 17 at device 31.2 on pci0 atapci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4100 atapci1: [MPSAFE] atapci1: [ITHREAD] atapci1: Reserved 0x800 bytes for rid 0x24 type 3 at 0xe460900 atapci1: AHCI Version 01.10 controller with 3 ports detected ata2: on atapci1 ata2: SATA connect time=0ms ata2: [MPSAFE] ata2: [ITHREAD] ata3: on atapci1 ata3: port not implemented ata3: [MPSAFE] ata3: [ITHREAD] ata4: on atapci1 ata4: port not implemented ata4: [MPSAFE] ata4: [ITHREAD] battery0: on acpi0 battery1: on acpi0 acpi_acad0: on acpi0 acpi_button0: on acpi0 acpi_lid0: on acpi0 acpi_tz0: on acpi0 acpi_tz0: _CRT value is absurd, ignored (256.0C) acpi_tz1: on acpi0 acpi_tz2: on acpi0 acpi_tz3: on acpi0 acpi_tz4: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56 atkbd0: [GIANT-LICKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ psmcpmp0: irq 12 on acpi0 psm0: current command byte:0065 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 00 00 64 psm: status 00 03 64 psm: status 00 03 64 psm: data 08 00 00 psm: status 00 02 64 psm0: irq 12 on atkbdc0 ioapco0: routing intpin 12 (ISA IRQ 12) to vector 57 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: syncmask:08, syncbits:00 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already existsl skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: on ppc0 lpt0: in ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 ioapci0: routing intpin 7 (ISA IRQ 7) to vector 58 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio0: configured irq 4 not in bitmap on probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0x4ea1 0x4ea1 0x4ea1 0x4ea1 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0: configured irq 4 not in bitmap on probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0x4ea1 0x4ea1 0x4ea1 0x4ea1 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not respoding ioapic0: routing intpin 4 (ISA IRQ 4) to vector 59 sio0: [FILTER] sio1: configured irq 3 not in bitmap on probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x4ea1 0x4ea1 0x4ea1 0x4ea1 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices ugen0: on uhub0 ugen1: on uhub3 Device configuration finised. Reducing kern.maxvnodes 133842 -> 100000 procfs registered lapic: Divisor 2, Frequency 99750924 hz Timecounter "TCS" frequency 2194520240 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached firewire0: 1 nodes, maxhp <=0, cable IRM = 0 (me) firewire0: bus manager 0 (me) acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \_SB_.C003.C11D.C11E -> bus 0 dev 28 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \_SB_.C003.C131.C11E -> bus 0 dev 28 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 acpi_tz0: _AC4: temperature 65.0 >= setpoint 35.0 acpi_tz0: _AC3: temperature 65.0 >= setpoint 45.0 acpi_tz0: _AC2: temperature 65.0 >= setpoint 55.0 acpi_tz0: _AC1: temperature 65.0 >= setpoint 65.0 acpi_tz0: switched from NONE to _AC1: 65.0C battery0: battery initialization start AcpiOsDerivePciId: \_SB_.C003.C134.C11E -> bus 0 dev 28 func 4 battery1: battery initialization start acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times acpi_tz0: _AC4: temperature 65.0 >= setpoint 35.0 acpi_tz0: _AC3: temperature 65.0 >= setpoint 45.0 acpi_tz0: _AC2: temperature 65.0 >= setpoint 55.0 acpi_tz0: _CRT value is absurd, ignored (256.0C) acpi_tz0: _AC4: temperature 65.0 >= setpoint 30.0 acpi_tz0: _AC3: temperature 65.0 >= setpoint 40.0 acpi_tz0: _AC2: temperature 65.0 >= setpoint 50.0 acpi_tz0: _AC4: temperature 65.0 >= setpoint 30.0 acpi_tz0: _AC3: temperature 65.0 >= setpoint 40.0 acpi_tz0: _AC2: temperature 65.0 >= setpoint 50.0 acpi_tz0: _AC4: temperature 65.0 >= setpoint 30.0 acpi_tz0: _AC3: temperature 65.0 >= setpoint 40.0 acpi_tz0: _AC2: temperature 65.0 >= setpoint 50.0 battery0: battery initialization done, tried 1 times --AhhlLboLdkugWU4S--