From owner-freebsd-multimedia Sun Jul 11 5:24:26 1999 Delivered-To: freebsd-multimedia@freebsd.org Received: from dialup124.zpr.Uni-Koeln.DE (dialup124.zpr.Uni-Koeln.DE [134.95.219.124]) by hub.freebsd.org (Postfix) with ESMTP id 3D0901514B; Sun, 11 Jul 1999 05:24:21 -0700 (PDT) (envelope-from se@dialup124.zpr.Uni-Koeln.DE) Received: (from se@localhost) by dialup124.zpr.Uni-Koeln.DE (8.9.3/8.9.3) id NAA00907; Sun, 11 Jul 1999 13:31:46 +0200 (CEST) (envelope-from se) Date: Sun, 11 Jul 1999 13:31:46 +0200 From: Stefan Esser To: The Hermit Hacker Cc: freebsd-multimedia@FreeBSD.ORG, Stefan Esser Subject: Re: QuickTime: Anyone doing anything with this? Message-ID: <19990711133146.C388@dialup124.mi.uni-koeln.de> Reply-To: se@FreeBSD.ORG References: Mime-Version: 1.0 Content-Type: multipart/mixed; boundary=oLBj+sq0vYjzfsbl X-Mailer: Mutt 0.95.6i In-Reply-To: ; from The Hermit Hacker on Thu, Jul 08, 1999 at 09:48:52AM -0300 Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org --oLBj+sq0vYjzfsbl Content-Type: text/plain; charset=us-ascii On 1999-07-08 09:48 -0300, The Hermit Hacker wrote: > > Just got this from one of my co-workers: > > http://www.apple.com/pr/library/1999/jul/07qt.html > > Wonder if anyone has/is looking at this already as far as FreeBSD is > concerned? I prepared a port, but was not able to test it. Sent it to hackers already, with the following comments: % Here is my attempt at a port. I had no time to test it, though, but % the build seems to be OK, and the binaries don't drop core immediately ;-) % % I made some assumptions in the patches for the PTHREAD_MUTEX_RECURSIVE_NP % argument passed to pthread_mutexattr_setkind_np(), see patch-ab and -af, % which may be just signs of pure optimism. Didn't check the sources of the % pthreads library to see whether my assumption (PTHREAD_MUTEX_RECURSIVE_NP % may be defined as PTHREAD_MUTEX_RECURSIVE) is correct or not. I just wanted % get the build to complete ... Regards, STefan --oLBj+sq0vYjzfsbl Content-Type: application/x-tar-gz Content-Disposition: attachment; filename="quicktime-server.port.tar.gz" Content-Transfer-Encoding: base64 H4sICA77hDcCA3F1aWNrdGltZS1zZXJ2ZXIucG9ydC50YXIA7Rx/c9q4Mv/iT6GXMFc4YmMb Aw05bkLBSbiGH8XONZ25GZ9jC/Ar2DzbNMnd9b7q+ypvJRkwxkmv717Im441DZa1q5W00q52 11J75kc8dmb44BmTJIo1RUEHCEn1qhh/0iTLAES1uiJBsVSFPFSoVg6QeLCHtAxC00foIPgC CwJ88C2mI9THd2jh+WGALG82w1boeC6aR8sCjT2/AXP0r6VjfQydOeYD7H/CPneEfsZ+QFB9 DEAf2w06l4IIoI4ZYmT5GB6smKTX6Kfl7AFJJycngPJ+6s3XoFXSQjw2XaT+G/vohwCfjX2M bwNb8PzJj9wR1Mp37UYeclynq+n9Vk9t5rQQ2pk77kSjHeNlbvj2goGSnQZYu6WrF4NRV9Wa OReHXK+l6erI0Lo6KZmG4aJRLt/d3QmL5e3MsQJv6VtYMBeLGRYsb15e+N4/gUVBOVg1W2Y4 ZQ5odfs6/KmjZm678wT2VjXU/s/NXLev6a2rK2M4GlyMWr3mYb6QKCoeol+43Bqx09JbcSzy HqH03na6IwKjmeIhx9keP8ahNW0A9CzEQYh4H+ULhF0Eo8yyhD3FfEG90Uettm5o1+c3RfTH H+h3ShUA7ctBER1+8JZoan7CKPRglidOEMK8mCEKpxi9ahGeoMECu0ijHEDDiDevDk+36TDu I8dFnm9DBsjZ3p0780yb0rKB8mqxQYET0PX4jySZ5Hvbc11oj5D7iok7TpKBebSR6cKfZeEF Gx1QwK6Fj9EEh+gBaAV4NgYkguMt3TBJg1Sfm+7SnMEKpxPAmNQx/TsY9nqNIrZIXwEvQi9J hLSz5kUAOR867PkP6NVmAl8JUS1874RIOkWfOW7hBSGP70PftMIGJdgeFlE+P3zfKVNS5d5K mvOF96O32qhdLAMe4faYzAqhl2vdestQn+JoMmnZm6Uzs7surPUlVQsBK2Yo5613rCu2x4rz Be2yGGvinQ4r4v6BsP7+wVi6zn3Zxj3TiqHkxysSLj7lOMFxrdnSxugHIjhkEQjzjz9yB1l6 tsQWyPO2gRSxXq0+uv9DEtf7fwUACEFeOUDVbP/f0/zP7efk9RfsPzD35Gj+axVJrlD7r1bN 7L99pF6nigo7NpQAPBEmvxVRE8kn9u3JrVIbS3WYlNe1qmJWRPlWqd/enlQq2Mq08zcg/71n 9QK/IP+SUpfX+l+sSFAiSVUpk/99JLBYwWa0bPROPycW4nffUd8P8WO0WhTCcKB1b7icPyel o6m5YGqiPHNu3+kjfUgqCiaXm7mID5AglBmtBDxek7a4eX+qVdq1pCG5rhA5WRzngJXKxrLy hsDMHI7U8+5NkXQE32OrvHYIoQNb1m/UYfboumNvt1QnztRWaTSyVMAFThDWwTr/uEtZM+fg oVwx12ob0lkTiTHuHRmBDiNIqOyo7o7BDW79wqDvQsQqanBHJvuu6wluw/hJxkXVibmexulg avq4bHtP8Lo1HF6pxlW3rfY1lZXsuh7pnsfa8dga7khtdXrqDqf0BIs6niX44Th9/NSpTgw+ bSyx4X8b8r8wwVl9Zg/gr9v/NalaV4j9X1cy+3+v80+fvGm+xP5fqa3mX64rxBeQJKUiZ/v/ PhLP89HWX97eef/Mvcc2CdmCNCJRbihSo/qaRW9LpVJ6nZw+XbIqgFlpKGJDrLAqZ2eIV46l CirR37MzDnHoCP6htjdfAAEf2UDIdZiyJ/G08cycBBzfboMTgicWyUK7q/xVt/929VKiOJYF GYpBchHcshC/CKckxseh1ghKTB+a5jug4vuqBu98xzBmjru8NwyaH+qXZEPRDKMpQQGMswvb VU/tDUYfjI765vriotu/aIqkZ+dXrQtKY4J40w0cxL8HG4Qr/WXqBns1tNa5+mRjpccaiw0P Br/CyRci/CLhM+V+5fVxHZXob4z71HgJPW+GWMQ0EDheVzXdaA96vUHfGLz5SWvmBlpvGeJ7 wUP2cj5/MFx8Z9h4hkMMRfxs1YPS19XkEBtvt38+oOi5Zm5jgW3glOoWnPSawYkNFkdpoi27 DNpNGKmZx/ek/r99ifhPXY7p/0qF6n+plun/Pev/laxai8WfCU1eURrSyY7yj1VI4tcaYPCt NX9VOa6hEvyeUN2T+x3+cgGt3ApDHxRWIdIhxpwUmlBohN8X56DgPKsQOL9hb5yGUiyeElK7 ELKTFDYtAFrpyBm7sMegSAUbvWtdvTFGavt6pHV/Vo3+EHDoJoSfwHkMBHWxazvj9O4EOPzo uLbhLmKdOn6iGTquzzn4KXzyHLu4RZKN7rsxpXSMtob5N+Xfegn5r9Sllf0vSnKNyX8W/30p +Z/umH5yQxQflf5pUvarDSlu9dWJ7MMvk/2j1Se+w/nDnNU/hFI8C3AM+EO03oXpj1Rwidwa xrmP8RsNrChSlsAE0WLIkRSunvEWB9olYGI/IG1mW3+a/Nsv4f/Vpfr6+48sV6n8K9n+v0f5 34kbrvy6FFUgb6mCR2tuaYVaQ6qudQi1CI4VMAiOq1QnaNd96qw0+Xvw5PjOtaZGjlFT4hB4 ctc3ETwOAqfofKSqoBBWwG1vau0XjS5bw5T6UuQYKSLpiyIdv2bGCfGdSEiT+U+Q2XSAvJFz C4j3IEdP0QjUuxN+XbrmHCN+/mvMH0JcKQq6Ntboq4B1KVHQyEWk84XLzqjIlXb7ER9tWk/W pDlkzbDpNmAwLGbPAsAeWobODB6b2YKXCQ69BXGUaLjTNpb2AlwrOkcSzE+pWotmiUTi8wW9 NyQh31MEdpKNBMTTcR8KfuBbh4gn0WIEjf7+Gf1ymqhT9vEE358i1qeu5bkN0eb4bZxN3xii P16PL5g4m/zSTczA9+t3f2ouGAeigPL3MKDS8zST4P1Os0musbGbE0CfYzcUpvTw0fo1NJ0Z q1MO54tTRFQTb91+GiOQOqFMYtODmw+ElAD8Jl9pt0u5v6v/8Uvof3nz/V+p15j/R+K/mf7f j/6PfTX5QgxQblQqG+3/aL0t3X9CvMFKzBtUTo4lYhKebCKBV903o9bogzFs6Zc0xnUlcHws 4sXxR2gV5ItFBEtbQbHBRuevI4KJoFgUEyPUWKSwVNoOK64A7XYsmLgKNgKBUqm4ji2y19hG Q8oHQ521tTWkIqHxhnZ0to5GbXYKyAWhTTpTSkWLgOhoE1hMiyZ2rnvDkfruWtV0jRa0NE0d 6SQ7xvfkcCMJrsaDn2lU0iuVnq6UCGSm04CJFrTr8/Pujao1EAkbIFCRmQ3+f2T/j1/C/68p lY39T8//S4pcz/T/C+j/rRjgjvJXxFTl/1gcEDT/63UdalHK1OyXo28QWQzwL8UA9yn/kxeJ /8kb+VfESP7FTP5fUP6nXy/906TsnzTAzNtYfdTlh18m+88Y8cs29f9e/qcvIf9ybRP/qygS O/+Ryf9LyP/cdNxHNv+KnCr+qxq5hPgrSkOSNuJfkWXyHYA9iAL4TI5hbHbkuKwj8skLhdif O64Z4kKRhJMYdibj/2v5/zgpP3cbX3H/R5TFGjkRINZq2fm/fc0/ObGj9vVna+NL+h9V199/ 63WRfP8RpWr2/WcviR4o58mJcqQIIiqwG6vFnSurmcb9dvV/R9Xao2ds46vkn5z/QvV6dv4j k/8s7Uf+h1ddTX85+ZfE2P//Ildr9P6vlJ3/30vaveG1OYLNPQYkR6tTgbGj14/BL7CbCmL3 3dJBsUtyqQjry3Vp0EduzKWg7l6W49LugG1dYEvH2LrQloqyc8EtFeuxS2ypyOweXCpofXGO O7Md35+jncGvACm1M9WfpSxlKUvfYPoPHTKzHABQAAA= --oLBj+sq0vYjzfsbl-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Mon Jul 12 1: 5:58 1999 Delivered-To: freebsd-multimedia@freebsd.org Received: from ns.oeno.com (ns.oeno.com [194.100.99.145]) by hub.freebsd.org (Postfix) with SMTP id 1014414C98 for ; Mon, 12 Jul 1999 01:05:55 -0700 (PDT) (envelope-from will@ns.oeno.com) Received: (qmail 26415 invoked by uid 1001); 12 Jul 1999 08:04:38 -0000 Date: 12 Jul 1999 08:04:38 -0000 Message-ID: <19990712080438.26412.qmail@ns.oeno.com> From: Ville-Pertti Keinonen To: jkh@zippy.cdrom.com Cc: dfr@nlsystems.com, freebsd-multimedia@FreeBSD.ORG, vallo@matti.ee In-reply-to: <12079.931539417@zippy.cdrom.com> (jkh@zippy.cdrom.com) Subject: Re: How to actually link with GLX library? Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > That must be the Riva TNT driver then because the docs are very > specific that acceleration ONLY happens at 16 bit, and I've tried > it at 16, 24 and 32 and verified this for myself already. I was talking about the G200 driver. The README and FAQ say that it only supports 16-bit Z-buffers, but that's not the same thing as color depth. The driver did seem to accelerate in 32-bit mode the last time I tried (not very recently), but you do need to have a sufficiently low resolution and/or small window. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Mon Jul 12 1:14:36 1999 Delivered-To: freebsd-multimedia@freebsd.org Received: from herring.nlsystems.com (nlsys.demon.co.uk [158.152.125.33]) by hub.freebsd.org (Postfix) with ESMTP id E9DAE151F6 for ; Mon, 12 Jul 1999 01:14:25 -0700 (PDT) (envelope-from dfr@nlsystems.com) Received: from salmon.nlsystems.com (salmon.nlsystems.com [10.0.0.3]) by herring.nlsystems.com (8.9.3/8.8.8) with ESMTP id JAA44180; Mon, 12 Jul 1999 09:14:45 +0100 (BST) (envelope-from dfr@nlsystems.com) Date: Mon, 12 Jul 1999 09:14:44 +0100 (BST) From: Doug Rabson To: Ville-Pertti Keinonen Cc: jkh@zippy.cdrom.com, freebsd-multimedia@FreeBSD.ORG, vallo@matti.ee Subject: Re: How to actually link with GLX library? In-Reply-To: <19990712080438.26412.qmail@ns.oeno.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On 12 Jul 1999, Ville-Pertti Keinonen wrote: > > > That must be the Riva TNT driver then because the docs are very > > specific that acceleration ONLY happens at 16 bit, and I've tried > > it at 16, 24 and 32 and verified this for myself already. > > I was talking about the G200 driver. The README and FAQ say that it > only supports 16-bit Z-buffers, but that's not the same thing as color > depth. > > The driver did seem to accelerate in 32-bit mode the last time I tried > (not very recently), but you do need to have a sufficiently low > resolution and/or small window. That makes sense. You need a lot more memory for 3D - for 32bpp color: width * height * 4 front buffer width * height * 4 back buffer width * height * 2 depth buffer It adds up pretty quickly which is why most of the card manufacturers are selling 16mb and 32mb cards now :-). Any memory left over is generally used for textures and the amount of texture memory can affect performance noticably. I have a 16mb TNT card (which I got from someone who upgraded to TNT2) and it has plenty of memory for 1280x1024x16bpp. -- Doug Rabson Mail: dfr@nlsystems.com Nonlinear Systems Ltd. Phone: +44 181 442 9037 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Mon Jul 12 2: 6:39 1999 Delivered-To: freebsd-multimedia@freebsd.org Received: from freeamp.org (209.249.146.48.has.no.reverse [209.249.146.48]) by hub.freebsd.org (Postfix) with ESMTP id 46B0E14BDE; Mon, 12 Jul 1999 02:06:25 -0700 (PDT) (envelope-from marc@freeamp.org) Received: (from marc@localhost) by freeamp.org (8.8.7/8.8.7) id CAA15634; Mon, 12 Jul 1999 02:27:35 -0700 Date: Mon, 12 Jul 1999 02:27:35 -0700 Message-Id: <199907120927.CAA15634@freeamp.org> From: To: multimedia@freebsd.org, ports@freebsd.org Subject: Port riva-glx Reply-To: van.woerkom@netcologne.de, marc@freeamp.org Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Over the weekend I was busy turning Jordan Hubbard's article on applying nvidia's 3d hardware acceleration XFree86/Mesa driver for RIVA based cards into a FreeBSD port. It has not been fully tested but it is in a sufficient state now that I would appreciate comments to help me sort out the remaining issues. You can download my stuff from http://www.netcologne.de/~nc-vanwoma/riva-glx Please dare to use it only if you can live a day or two without working X if things go wrong! Note that I provide a patch to Mesa3/Makefile to make this port not build XFree86 in case of a 'make patch' target (it should just extract and apply FreeBSD patches). Also note that this port applies to both RIVA 128/128ZX and RIVA TNT/TNT2/.. based cards. Regards, Marc To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Mon Jul 12 9:28:24 1999 Delivered-To: freebsd-multimedia@freebsd.org Received: from fleming.cs.strath.ac.uk (fleming.cs.strath.ac.uk [130.159.196.126]) by hub.freebsd.org (Postfix) with ESMTP id 34C2B14CB3 for ; Mon, 12 Jul 1999 09:28:18 -0700 (PDT) (envelope-from roger@cs.strath.ac.uk) Received: from muir-10 (roger@muir-10.cs.strath.ac.uk [130.159.148.10]) by fleming.cs.strath.ac.uk (8.8.8/8.8.8) with SMTP id RAA09607 Mon, 12 Jul 1999 17:28:17 +0100 (BST) Message-ID: <378A17A1.167E@cs.strath.ac.uk> Date: Mon, 12 Jul 1999 17:28:17 +0100 From: Roger Hardiman Organization: University of Strathclyde X-Mailer: Mozilla 3.04Gold (X11; I; OSF1 V4.0 alpha) MIME-Version: 1.0 To: multimedia@freebsd.org Subject: New Bt848 driver version 1.70 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, I've released another new bt848 driver. http://telepresence.dmem.strath.ac.uk/bt848 Main improvments are audio support for MSP3430 users in the USA with Hauppauge cards. A teletext bug fix for users with 2 or more bt848 cards A teletext bug fix for NTSC viewers. The driver also reports the Hauppauge Model Number and has some experimental TDA9850 (DBX) stereo initialisation code. The driver is available for all FreeBSD versions from 2.2.5 and above (including 3.x and 4.x-current) and has just been committed to the -current tree. Good luck, Roger -- Roger Hardiman | Telepresence Research Group roger@cs.strath.ac.uk | DMEM, University of Strathclyde tel: 0141 548 2897 | Glasgow, Scotland, G1 1XJ, UK fax: 0141 552 0557 | http://telepresence.dmem.strath.ac.uk To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Mon Jul 12 18: 8: 5 1999 Delivered-To: freebsd-multimedia@freebsd.org Received: from freeamp.org (209.249.146.48.has.no.reverse [209.249.146.48]) by hub.freebsd.org (Postfix) with ESMTP id 70F8E152CB; Mon, 12 Jul 1999 18:07:56 -0700 (PDT) (envelope-from marc@freeamp.org) Received: (from marc@localhost) by freeamp.org (8.8.7/8.8.7) id SAA23784; Mon, 12 Jul 1999 18:29:50 -0700 Date: Mon, 12 Jul 1999 18:29:50 -0700 Message-Id: <199907130129.SAA23784@freeamp.org> From: To: multimedia@freebsd.org, ports@freebsd.org Reply-To: van.woerkom@netcologne.de, marc@freeamp.org Subject: riva-glx (3d hardware acceleration) port Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I put an improved version of this port on the web at http://www.netcologne.de/~nc-vanwoma/riva-glx It should build now. Please report problems to me. Regards, Marc To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Mon Jul 12 19:44:59 1999 Delivered-To: freebsd-multimedia@freebsd.org Received: from pluto.ipass.net (pluto.ipass.net [198.79.53.5]) by hub.freebsd.org (Postfix) with ESMTP id 2E8C815089 for ; Mon, 12 Jul 1999 19:44:53 -0700 (PDT) (envelope-from rhh@ipass.net) Received: from stealth.ipass.net. (ppp-6-223.dialup.rdu.ipass.net [209.170.134.223]) by pluto.ipass.net (8.9.3/8.9.3) with ESMTP id WAA01828 for ; Mon, 12 Jul 1999 22:43:42 -0400 (EDT) Received: (from rhh@localhost) by stealth.ipass.net. (8.9.3/8.8.8) id WAA06051 for multimedia@FreeBSD.ORG; Mon, 12 Jul 1999 22:45:50 -0400 (EDT) (envelope-from rhh) Date: Mon, 12 Jul 1999 22:45:50 -0400 From: Randall Hopper To: multimedia@FreeBSD.ORG Subject: Re: New Bt848 driver version 1.70 Message-ID: <19990712224550.A5911@ipass.net> References: <378A17A1.167E@cs.strath.ac.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.1i In-Reply-To: <378A17A1.167E@cs.strath.ac.uk>; from Roger Hardiman on Mon, Jul 12, 1999 at 05:28:17PM +0100 Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Roger Hardiman: |I've released another new bt848 driver. ... |The driver also reports the Hauppauge Model Number and has some |experimental TDA9850 (DBX) stereo initialisation code. Great--Thanks! This is opportune timing for this feature for me since I'm about to get DSS (satellite) service. Randall To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Tue Jul 13 12: 4:18 1999 Delivered-To: freebsd-multimedia@freebsd.org Received: from ozz.etrust.ru (ozz.etrust.ru [195.2.84.116]) by hub.freebsd.org (Postfix) with ESMTP id 5DD36152D7; Tue, 13 Jul 1999 12:04:06 -0700 (PDT) (envelope-from osa@etrust.ru) Received: from localhost (localhost [127.0.0.1]) by ozz.etrust.ru (Postfix) with ESMTP id 08A95F2; Tue, 13 Jul 1999 23:03:12 +0400 (MSD) Date: Tue, 13 Jul 1999 23:03:11 +0400 (MSD) From: Osokin Sergey To: van.woerkom@netcologne.de, marc@freeamp.org Cc: multimedia@FreeBSD.ORG, ports@FreeBSD.ORG Subject: Re: riva-glx (3d hardware acceleration) port In-Reply-To: <199907130129.SAA23784@freeamp.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Mon, 12 Jul 1999 marc@freeamp.org wrote: > I put an improved version of this port on the web at > > http://www.netcologne.de/~nc-vanwoma/riva-glx > > It should build now. Please report problems to me. > > Bad news... I think i can't work under 4.0 with my ASUSTeK 3DexPlorer (based RIVA128) % cd /usr/ports/graphics/Mesa3/work/Mesa-3.0/demos % ./gears GLUT: Fatal Error in gears: visual with necessary capabilities not found. What does it means? Rgdz, Osokin Sergey aka oZZ, osa@etrust.ru http://www.freebsd.org.ru To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Tue Jul 13 18:24:34 1999 Delivered-To: freebsd-multimedia@freebsd.org Received: from cs.tamu.edu (clavin.cs.tamu.edu [128.194.130.106]) by hub.freebsd.org (Postfix) with ESMTP id AD663150B8 for ; Tue, 13 Jul 1999 18:24:31 -0700 (PDT) (envelope-from faisalc@cs.tamu.edu) Received: from swallow.cs.tamu.edu (IDENT:594@swallow [128.194.135.117]) by cs.tamu.edu (8.9.3/8.9.3) with ESMTP id UAA23056; Tue, 13 Jul 1999 20:22:07 -0500 (CDT) From: Faisal M Chaudhry Received: (from faisalc@localhost) by swallow.cs.tamu.edu (8.9.3/8.9.3) id UAA06031; Tue, 13 Jul 1999 20:22:27 -0500 (CDT) Message-Id: <199907140122.UAA06031@swallow.cs.tamu.edu> Subject: How to invoke "rtpdump"? To: freebsd-multimedia@freebsd.org Date: Tue, 13 Jul 1999 20:22:27 -0500 (CDT) Cc: faisalc@cs.tamu.edu (Faisal M Chaudhry) X-Mailer: ELM [version 2.4 PL25] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, I'm running FreeBSD 2.2.7-RELEASE on two PC's and have a hauppage Wincast/TV card installed on one of them. Both PC's have a waveLAN interface and I transmit video images from one PC to the other over the wireless interface. I'm using vic v2.8 to transmit the video from a camera source. Here is my problem, which I hope I can get some advice on: I need to use rtpdump to see the rtcp packets coming in on the receiving end. I have not been able to do this yet and am wondering if I am using rtpdump correctly. Here is what I do... 1) start vic on machine A: vic IPaddr-of-B/23886 2) start vic on machine B: vic IPaddr-of-A/23886 3) start rtpdump on B: rtpdump -F rtcp -t 1 IPaddr-of-A/23886 > dump.txt "23886" is the port I'm using on both machines. The video transmission is one-way (from A to B) and I can successfully see the video on B's screen. However, the file "dump.txt" is always found empty when rtpdump finishes after 1 minute. Has anyone out there used rtpdump successfully? Faisal faisal@tamu.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Tue Jul 13 20: 6:52 1999 Delivered-To: freebsd-multimedia@freebsd.org Received: from mickey00.mickey.ai.kyutech.ac.jp (mickey00.mickey.ai.kyutech.ac.jp [131.206.21.1]) by hub.freebsd.org (Postfix) with ESMTP id 0DE1614E7F; Tue, 13 Jul 1999 20:06:32 -0700 (PDT) (envelope-from ohashi@mickey.ai.kyutech.ac.jp) Received: from atohasi.mickey.ai.kyutech.ac.jp (atohasi.mickey.ai.kyutech.ac.jp [131.206.21.80]) by mickey00.mickey.ai.kyutech.ac.jp (8.9.3/3.7W-mickey) with ESMTP id LAA09211; Wed, 14 Jul 1999 11:58:52 +0900 (JST) Received: (from ohashi@localhost) by atohasi.mickey.ai.kyutech.ac.jp (8.9.3/3.7W) id LAA07131; Wed, 14 Jul 1999 11:58:47 +0900 (JST) Date: Wed, 14 Jul 1999 11:58:47 +0900 (JST) Message-Id: <199907140258.LAA07131@atohasi.mickey.ai.kyutech.ac.jp> To: osa@etrust.ru Cc: van.woerkom@netcologne.de, marc@freeamp.org, multimedia@FreeBSD.ORG, ports@FreeBSD.ORG, ohashi@mickey.ai.kyutech.ac.jp Subject: Re: riva-glx (3d hardware acceleration) port In-Reply-To: Your message of "Wed, 14 Jul 1999 04:03:11 JST". From: ohashi@mickey.ai.kyutech.ac.jp (Takeshi OHASHI) X-Mailer: mnews [version 1.21] 1997-12/23(Tue) Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org osa>>On Mon, 12 Jul 1999 marc@freeamp.org wrote: osa>> osa>>> I put an improved version of this port on the web at osa>>> osa>>> http://www.netcologne.de/~nc-vanwoma/riva-glx osa>>> osa>>> It should build now. Please report problems to me. osa>>> osa>>> osa>>Bad news... osa>>I think i can't work under 4.0 with my ASUSTeK 3DexPlorer osa>>(based RIVA128) osa>> osa>>% cd /usr/ports/graphics/Mesa3/work/Mesa-3.0/demos osa>>% ./gears osa>>GLUT: Fatal Error in gears: visual with necessary capabilities not found. osa>> osa>>What does it means? I don't know about that error exactly, but it seems not to suppor your current visual. Did you recompile Mesa-3.0 and XFree86 after applied the pathes? Did you check your XF86Config? In our site, riva-glx ports work fine on RIVA128(RAM 4MB), RIVA128(RAM 8MB) and RIVA128TNT(RAM 16MB). I could build xtt-SVGA-1.2.1 with 3D support. It is very nice. -- Takeshi OHASHI ohashi@mickey.ai.kyutech.ac.jp ohashi@jp.FreeBSD.ORG To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Tue Jul 13 23:54:58 1999 Delivered-To: freebsd-multimedia@freebsd.org Received: from herring.nlsystems.com (nlsys.demon.co.uk [158.152.125.33]) by hub.freebsd.org (Postfix) with ESMTP id 8A57214FAA; Tue, 13 Jul 1999 23:54:41 -0700 (PDT) (envelope-from dfr@nlsystems.com) Received: from salmon.nlsystems.com (salmon.nlsystems.com [10.0.0.3]) by herring.nlsystems.com (8.9.3/8.8.8) with ESMTP id HAA06274; Wed, 14 Jul 1999 07:53:00 +0100 (BST) (envelope-from dfr@nlsystems.com) Date: Wed, 14 Jul 1999 07:53:00 +0100 (BST) From: Doug Rabson To: Osokin Sergey Cc: van.woerkom@netcologne.de, marc@freeamp.org, multimedia@freebsd.org, ports@freebsd.org Subject: Re: riva-glx (3d hardware acceleration) port In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Tue, 13 Jul 1999, Osokin Sergey wrote: > > On Mon, 12 Jul 1999 marc@freeamp.org wrote: > > > I put an improved version of this port on the web at > > > > http://www.netcologne.de/~nc-vanwoma/riva-glx > > > > It should build now. Please report problems to me. > > > > > Bad news... > I think i can't work under 4.0 with my ASUSTeK 3DexPlorer > (based RIVA128) > > % cd /usr/ports/graphics/Mesa3/work/Mesa-3.0/demos > % ./gears > GLUT: Fatal Error in gears: visual with necessary capabilities not found. > > What does it means? Possibly not enough video memory. What screen mode are you using? How much ram does the card have? -- Doug Rabson Mail: dfr@nlsystems.com Nonlinear Systems Ltd. Phone: +44 181 442 9037 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Wed Jul 14 1:19:20 1999 Delivered-To: freebsd-multimedia@freebsd.org Received: from basil.cdt.luth.se (basil.cdt.luth.se [130.240.64.67]) by hub.freebsd.org (Postfix) with ESMTP id 9C6C21538C for ; Wed, 14 Jul 1999 01:19:13 -0700 (PDT) (envelope-from peppar@cdt.luth.se) Received: from cdt.luth.se (blipp.cdt.luth.se [130.240.194.242]) by basil.cdt.luth.se (8.8.8/8.7.3) with ESMTP id KAA02834; Wed, 14 Jul 1999 10:18:34 +0200 (MET DST) Message-ID: <378C47F0.F98EC503@cdt.luth.se> Date: Wed, 14 Jul 1999 10:18:56 +0200 From: Peter Parnes Organization: Centre for Distance-spanning =?iso-8859-1?Q?Technology=2FLule=E5?= University of Technology, Marratech AB X-Mailer: Mozilla 4.6 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: Faisal M Chaudhry Cc: freebsd-multimedia@FreeBSD.ORG Subject: Re: How to invoke "rtpdump"? References: <199907140122.UAA06031@swallow.cs.tamu.edu> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I have never used _that_ RTPDump but here is a guess... Try starting RTPDump on port 23887 instead of 23886. FYI, RTP actually consists of two protocols, RTP for data and RTCP for control. RTP is transported on the baseport while RTCP is transported on baseport+1. /P To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Wed Jul 14 5:28:58 1999 Delivered-To: freebsd-multimedia@freebsd.org Received: from gloria.cord.edu (gloria.cord.edu [138.129.254.6]) by hub.freebsd.org (Postfix) with ESMTP id B2A2A14BCD; Wed, 14 Jul 1999 05:28:53 -0700 (PDT) (envelope-from twschulz@gloria.cord.edu) Received: from localhost (twschulz@localhost) by gloria.cord.edu (8.9.0/8.9.1) with ESMTP id HAA12199; Wed, 14 Jul 1999 07:28:01 -0500 (CDT) Date: Wed, 14 Jul 1999 07:28:01 -0500 (CDT) From: Trenton Schulz To: Osokin Sergey Cc: van.woerkom@netcologne.de, marc@freeamp.org, multimedia@FreeBSD.ORG, ports@FreeBSD.ORG Subject: Re: riva-glx (3d hardware acceleration) port In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Tue, 13 Jul 1999, Osokin Sergey wrote: > > On Mon, 12 Jul 1999 marc@freeamp.org wrote: > > > I put an improved version of this port on the web at > > > > http://www.netcologne.de/~nc-vanwoma/riva-glx > > > > It should build now. Please report problems to me. > > > > > Bad news... > I think i can't work under 4.0 with my ASUSTeK 3DexPlorer > (based RIVA128) > > % cd /usr/ports/graphics/Mesa3/work/Mesa-3.0/demos > % ./gears > GLUT: Fatal Error in gears: visual with necessary capabilities not found. > > What does it means? What this means is that your card does not have enough memory to do 3d acceleration at your current resolution/depth. If you have a riva128 with 4MB of Ram like I do, you have to run X at a resolution of 800x600 or 640x480 in 15bpp or 16bpp to get Hardware acceleration. And this is the total desktop resolution (no virtual desktop) However a pager is ok. Hope this helps, -- Trenton Schulz twschulz@cord.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Wed Jul 14 13:37:51 1999 Delivered-To: freebsd-multimedia@freebsd.org Received: from ozz.etrust.ru (ozz.etrust.ru [195.2.84.116]) by hub.freebsd.org (Postfix) with ESMTP id E152214FC7; Wed, 14 Jul 1999 13:37:37 -0700 (PDT) (envelope-from osa@etrust.ru) Received: from localhost (localhost [127.0.0.1]) by ozz.etrust.ru (Postfix) with ESMTP id E142422E; Thu, 15 Jul 1999 00:37:31 +0400 (MSD) Date: Thu, 15 Jul 1999 00:37:31 +0400 (MSD) From: Osokin Sergey To: Trenton Schulz Cc: van.woerkom@netcologne.de, marc@freeamp.org, multimedia@FreeBSD.ORG, ports@FreeBSD.ORG Subject: Re: riva-glx (3d hardware acceleration) port In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Wed, 14 Jul 1999, Trenton Schulz wrote: > On Tue, 13 Jul 1999, Osokin Sergey wrote: > > > > > On Mon, 12 Jul 1999 marc@freeamp.org wrote: > > > > > I put an improved version of this port on the web at > > > > > > http://www.netcologne.de/~nc-vanwoma/riva-glx > > > > > > It should build now. Please report problems to me. > > > > > > > > Bad news... > > I think i can't work under 4.0 with my ASUSTeK 3DexPlorer > > (based RIVA128) > > > > % cd /usr/ports/graphics/Mesa3/work/Mesa-3.0/demos > > % ./gears > > GLUT: Fatal Error in gears: visual with necessary capabilities not found. > > > > What does it means? > > What this means is that your card does not have enough memory to do 3d > acceleration at your current resolution/depth. If you have a riva128 with > 4MB of Ram like I do, you have to run X at a resolution of 800x600 or > 640x480 in 15bpp or 16bpp to get Hardware acceleration. And this is the > total desktop resolution (no virtual desktop) However a pager is ok. > > Hope this helps, > Yes. Its help me. :-) I run my patched X-server in 800x600x15bpp on my ASUS 3DexPlorer with 4Mb RAM on board & i c 3D :-) Thanks all for help. Rgdz, Osokin Sergey aka oZZ, osa@etrust.ru P.S. I think i need more memory for good resolution ... :-) Thanks all. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Thu Jul 15 6:25:56 1999 Delivered-To: freebsd-multimedia@freebsd.org Received: from paprika.michvhf.com (paprika.michvhf.com [209.57.60.12]) by hub.freebsd.org (Postfix) with SMTP id CCE1014D8A for ; Thu, 15 Jul 1999 06:25:48 -0700 (PDT) (envelope-from vev@michvhf.com) Received: (qmail 23266 invoked by uid 1001); 15 Jul 1999 13:24:55 -0000 Date: Thu, 15 Jul 1999 09:24:55 -0400 (EDT) From: Vince Vielhaber To: freebsd-multimedia@freebsd.org Subject: pcm0 and the 1373 Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I'm setting up a new machine that has onboard sound in the form of an ES1373 Creative (Ensoniq, probably). Visual config shows an unknown device as ES0 and pcm0 doesn't find anything (tried various forms in the kernel config for that one, the last one was/is: device pcm0 Is there any driver for this chip? Under windows it uses the SoundBlaster AudioPCI 64V driver. So far I haven't found anything on Creative's or Ensoniq's website. Vince. -- ========================================================================== Vince Vielhaber -- KA8CSH email: vev@michvhf.com flame-mail: /dev/null # include TEAM-OS2 Online Campground Directory http://www.camping-usa.com Online Giftshop Superstore http://www.cloudninegifts.com ========================================================================== To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Thu Jul 15 12: 4:53 1999 Delivered-To: freebsd-multimedia@freebsd.org Received: from hpcs14.dv.fal.de (hpcs14e.dv.fal.de [134.110.18.14]) by hub.freebsd.org (Postfix) with ESMTP id 951261559D for ; Thu, 15 Jul 1999 12:04:44 -0700 (PDT) (envelope-from kraft@hpcs14.dv.fal.de) Received: (from kraft@localhost) by hpcs14.dv.fal.de (8.9.1/8.9.1) id VAA05492; Thu, 15 Jul 1999 21:04:37 +0200 (MET) From: Martin Kraft Message-Id: <199907151904.VAA05492@hpcs14.dv.fal.de> Subject: RE: SB Vibra16: more joy and rapture To: freebsd-multimedia@freebsd.org Date: Thu, 15 Jul 1999 21:04:37 +0200 (MET) Cc: cdoherty@nttmcl.com Reply-To: martin.kraft@fal.de X-Mailer: ELM [version 2.4 PL23] Content-Type: text Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Chris, your problem (posted on july 7) was: > int format = AFMT_S16_LE; > Ioctl( fd, SNDCTL_DSP_SETFMT, &format ); > > at which point format == 0. disturbed, I then did > > Ioctl( fd, AFMT_QUERY, &format ); > > thinking I might get the current format; and ioctl() failed! > > is this a characteristic of SB cards? can I safely assume if > ioctl() returns ok from SNDCTL_DSP_SETFMT, that the > format has been set? I had the same situation, and this was, what I found today in an earlier posting by runge on january 3 in mailing.freebsd.bugs (found it via www.deja.com): > Subject: i386/9283: ioctl(SNDCTL_DSP_SETFMT) on /dev/audio (pcm) > returns wrong value when sampling [..] > Environment: > FreeBSD fietje 3.0-RELEASE FreeBSD 3.0-RELEASE #15: Sat Jan 2 17:28:59 > CET 1999 > > >Description: > if you configure the audio device (luigis pcm driver) for sampling and > set the format via SNDCTL_DSP_SETFMT, the > driver returns the wrong format, even if it's set to the right value. > This bug even can be found in -current, guessing, it's in all previous > versions as well. > >How-To-Repeat: > open device read-only and try changing the sample format. Check the > return value and compare to input. > >Fix: > in /usr/src/sys/i386/isa/snd/sound.c change this: > > if (ask_init(d)) > *(int *)arg = d->play_fmt ; > > in line 992 (source of 3.0 RELEASE) > > to: > if (ask_init(d)) > { > if (d->play_fmt) > *(int *)arg = d->play_fmt ; > if (d->rec_fmt) > *(int *)arg = d->rec_fmt ; > } I did this change, recompiled my kernel, and it works (using DAP). Hope this also helps for you. Martin (martin.kraft@fal.de) P.S.: I don't follow freebsd-multimedia@freebsd.org; I just found your question in www.deja.com. Please cc any comment to my personal email address. Thanks. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Thu Jul 15 12:46: 6 1999 Delivered-To: freebsd-multimedia@freebsd.org Received: from alicia.nttmcl.com (alicia.nttmcl.com [216.69.69.10]) by hub.freebsd.org (Postfix) with ESMTP id BD09B14DEB for ; Thu, 15 Jul 1999 12:46:04 -0700 (PDT) (envelope-from cdoherty@nttmcl.com) Received: from bob by alicia.nttmcl.com (8.8.5/3.5W(96/10/22)) id MAA06756; Thu, 15 Jul 1999 12:42:07 -0700 (PDT) Message-Id: <3.0.6.32.19990715124131.008135a0@alicia.nttmcl.com> X-Sender: cdoherty@alicia.nttmcl.com X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.6 (32) Date: Thu, 15 Jul 1999 12:41:31 -0700 To: martin.kraft@fal.de, freebsd-multimedia@freebsd.org From: Chris Doherty Subject: RE: SB Vibra16: more joy and rapture In-Reply-To: <199907151904.VAA05492@hpcs14.dv.fal.de> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org [using ioctl() AFMT_QUERY returns format == 0] >> is this a characteristic of SB cards? can I safely assume if >> ioctl() returns ok from SNDCTL_DSP_SETFMT, that the >> format has been set? thanks! the code appears in the same file at line 1027 in 3.1-RELEASE; the code is different in 3.2-RELEASE (line 1059), but on inspection it doesn't look like this particular bug has been fixed--the changes fix a bug causing ioctl() to fail on some sound cards, rather than this problem of returning successfully with the wrong value. Chris >I had the same situation, and this was, what I found today in an >earlier posting by runge on january 3 in >mailing.freebsd.bugs (found it via www.deja.com): > >> in /usr/src/sys/i386/isa/snd/sound.c change this: >> >> if (ask_init(d)) >> *(int *)arg = d->play_fmt ; >> >> in line 992 (source of 3.0 RELEASE) >> >> to: >> if (ask_init(d)) >> { >> if (d->play_fmt) >> *(int *)arg = d->play_fmt ; >> if (d->rec_fmt) >> *(int *)arg = d->rec_fmt ; >> } > > --------------- I don't speak for NTT MCL. I'm an intern. Chris Doherty cdoherty@nttmcl.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Fri Jul 16 1: 6:38 1999 Delivered-To: freebsd-multimedia@freebsd.org Received: from ncsrv.netcologne.de (dial1-36.netcologne.de [194.8.196.36]) by hub.freebsd.org (Postfix) with ESMTP id 16E0614FB6; Fri, 16 Jul 1999 01:06:24 -0700 (PDT) (envelope-from van.woerkom@netcologne.de) Received: (from marc@localhost) by oranje.my.domain (8.9.3/8.9.1) id JAA00534; Wed, 14 Jul 1999 09:40:58 +0200 (CEST) (envelope-from van.woerkom@netcologne.de) Date: Wed, 14 Jul 1999 09:40:58 +0200 (CEST) Message-Id: <199907140740.JAA00534@oranje.my.domain> X-Authentication-Warning: oranje.my.domain: marc set sender to van.woerkom@netcologne.de using -f From: Marc van Woerkom To: ohashi@mickey.ai.kyutech.ac.jp Cc: osa@etrust.ru, multimedia@FreeBSD.ORG, ports@FreeBSD.ORG In-reply-to: <199907140258.LAA07131@atohasi.mickey.ai.kyutech.ac.jp> (ohashi@mickey.ai.kyutech.ac.jp) Subject: Re: riva-glx (3d hardware acceleration) port Reply-To: van.woerkom@netcologne.de, marc@freeamp.org References: <199907140258.LAA07131@atohasi.mickey.ai.kyutech.ac.jp> Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > In our site, riva-glx ports work fine on RIVA128(RAM 4MB), RIVA128(RAM > 8MB) and RIVA128TNT(RAM 16MB). > > I could build xtt-SVGA-1.2.1 with 3D support. It is very nice. I am glad to hear this! Thanks again to Jordan for his excellent article. Some additional points: 1. The new server has some additonal 2D accelerations too! From the riva-x-glx.faq document: Q. What are the differences in the 2D portion of the X server from the 3.3.3.1 version? A. More 2D acceleration has been added. Specifically stippled pattern fills; the logout screen in KDE was driving me crazy! The glyph rendering routines have all been hooked and accelerated at a high level. Some bugs in the video clock routines have been fixed (some people mentioned mode switches hanging - hopefully fixed). The X server now recognizes all TNT and TNT2 variants. 2. It looks like it has one 2d visual bug. I use Emacs 20.3.1 from the ports collection and here the screen update leaves part of the screen uncleaned - a horizontal line remains. (Just use the typical 2 tiled Emacs screen and then C-x 1 one window to full size, watch part of the separation middle bar to remain on the screen - C-l to refresh) I saw something different when browsing through my Netscape navigator bookmarks. Again a horizontal line remained. 3. The present port is not perfect yet: - It does not check if the XFree86 and Mesa stuff has been removed from the system - it is likely not to clean everything it put on the system - it should have some additional words of guidance, as the 3d acceleration works under specific settings only. Please read riva-x-glx.faq! - package building has not tested at all I will try to improve this during the next two weeks. At least it should clean properly at the time XFree86 4 arrives and we want to get rid of this stuff. :) Regards, Marc To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Fri Jul 16 1: 6:39 1999 Delivered-To: freebsd-multimedia@freebsd.org Received: from ncsrv.netcologne.de (dial1-36.netcologne.de [194.8.196.36]) by hub.freebsd.org (Postfix) with ESMTP id 7B3F314EE5; Fri, 16 Jul 1999 01:06:24 -0700 (PDT) (envelope-from van.woerkom@netcologne.de) Received: (from marc@localhost) by oranje.my.domain (8.9.3/8.9.1) id EAA69605; Wed, 14 Jul 1999 04:49:10 +0200 (CEST) (envelope-from van.woerkom@netcologne.de) Date: Wed, 14 Jul 1999 04:49:10 +0200 (CEST) Message-Id: <199907140249.EAA69605@oranje.my.domain> X-Authentication-Warning: oranje.my.domain: marc set sender to van.woerkom@netcologne.de using -f From: Marc van Woerkom To: osa@etrust.ru Cc: van.woerkom@netcologne.de, multimedia@FreeBSD.ORG, ports@FreeBSD.ORG In-reply-to: (message from Osokin Sergey on Tue, 13 Jul 1999 23:03:11 +0400 (MSD)) Subject: Re: riva-glx (3d hardware acceleration) port Reply-To: van.woerkom@netcologne.de References: Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > % cd /usr/ports/graphics/Mesa3/work/Mesa-3.0/demos > % ./gears > GLUT: Fatal Error in gears: visual with necessary capabilities not found. > > What does it means? I am not sure, as I did not encounter this error message so far. My card is a RIVA 128 based Diamond Viper 330 and here it work. Albeit I have to use a 15 or 16 bit color mode (maybe that is you problem) and it works only if the display is configured for 640x320 and 800x600 resolutions. I would suggest you read the docs in X11R6/share/docs/riva-glx, there were some remarks. Regards, Marc To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Fri Jul 16 2:30:36 1999 Delivered-To: freebsd-multimedia@freebsd.org Received: from herring.nlsystems.com (nlsys.demon.co.uk [158.152.125.33]) by hub.freebsd.org (Postfix) with ESMTP id 37BA314F36; Fri, 16 Jul 1999 02:30:30 -0700 (PDT) (envelope-from dfr@nlsystems.com) Received: from salmon.nlsystems.com (salmon.nlsystems.com [10.0.0.3]) by herring.nlsystems.com (8.9.3/8.8.8) with ESMTP id KAA86581; Fri, 16 Jul 1999 10:28:30 +0100 (BST) (envelope-from dfr@nlsystems.com) Date: Fri, 16 Jul 1999 10:28:30 +0100 (BST) From: Doug Rabson To: van.woerkom@netcologne.de, marc@freeamp.org Cc: ohashi@mickey.ai.kyutech.ac.jp, osa@etrust.ru, multimedia@freebsd.org, ports@freebsd.org Subject: Re: riva-glx (3d hardware acceleration) port In-Reply-To: <199907140740.JAA00534@oranje.my.domain> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Wed, 14 Jul 1999, Marc van Woerkom wrote: > > In our site, riva-glx ports work fine on RIVA128(RAM 4MB), RIVA128(RAM > > 8MB) and RIVA128TNT(RAM 16MB). > > > > I could build xtt-SVGA-1.2.1 with 3D support. It is very nice. > > I am glad to hear this! Thanks again to Jordan for his excellent article. > > Some additional points: > > ... > > 3. The present port is not perfect yet: > > - It does not check if the XFree86 and Mesa stuff has been removed from > the system > > - it is likely not to clean everything it put on the system > > - it should have some additional words of guidance, as the 3d acceleration > works under specific settings only. Please read riva-x-glx.faq! > > - package building has not tested at all > > I will try to improve this during the next two weeks. > At least it should clean properly at the time XFree86 4 arrives and we > want to get rid of this stuff. :) The glx implementation has a couple of bugs too. It can't cope with 256x256 textures (a bug in the glx protocol code which is fixed in the current glx sources). The tnt driver also doesn't support glTexCoord4f() but I have a fix for that. -- Doug Rabson Mail: dfr@nlsystems.com Nonlinear Systems Ltd. Phone: +44 181 442 9037 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Fri Jul 16 2:56:46 1999 Delivered-To: freebsd-multimedia@freebsd.org Received: from freeamp.org (209.249.146.48.has.no.reverse [209.249.146.48]) by hub.freebsd.org (Postfix) with ESMTP id A0B5E14D23; Fri, 16 Jul 1999 02:56:43 -0700 (PDT) (envelope-from marc@freeamp.org) Received: (from marc@localhost) by freeamp.org (8.8.7/8.8.7) id DAA03273; Fri, 16 Jul 1999 03:20:03 -0700 Date: Fri, 16 Jul 1999 03:20:03 -0700 Message-Id: <199907161020.DAA03273@freeamp.org> From: To: dfr@nlsystems.com Cc: van.woerkom@netcologne.de, ohashi@mickey.ai.kyutech.ac.jp, osa@etrust.ru, multimedia@freebsd.org, ports@freebsd.org In-reply-to: (message from Doug Rabson on Fri, 16 Jul 1999 10:28:30 +0100 (BST)) Subject: Re: riva-glx (3d hardware acceleration) port Reply-To: van.woerkom@netcologne.de, marc@freeamp.org References: Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > The glx implementation has a couple of bugs too. It can't cope with > 256x256 textures (a bug in the glx protocol code which is fixed in the > current glx sources). I would like to sync with the latest sources and fill the patches directory but I have had closer looks so far only on the nvidia stuff. Dunno anything more about glx origin than http://glx.on.openprojects.net/ (which is very Linux und Matrox G200 centric BTW) right now. Will investigate tonight. This link indicates that there is some benchmark suite available http://glx.on.openprojects.net/benchmarks.html and possibly there is also a GL testsuite somewhere. > The tnt driver also doesn't support glTexCoord4f() > but I have a fix for that. The packages for the RIVA 128 etc and TNT etc are the same. For some reason they were just called riva-glx and riva_glx. I found that the visual bugs I experience are related to fonts handling somehow. Different font, different effects. Regards, Marc P.S. Has email submission to freebsd.org been made been more strict? I found several emails defered in my /var/spool/mqueue because hub.freebsd.org could not resolve my hostname (which is not valid, as I my provider assigns IPs dynamically only and assigns no systemnames) This was no problem before (I found a sendmail.cf to work around this) since this week it is. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Fri Jul 16 22:39:33 1999 Delivered-To: freebsd-multimedia@freebsd.org Received: from dial1-19.netcologne.de (dial1-19.netcologne.de [194.8.196.19]) by hub.freebsd.org (Postfix) with ESMTP id 2CC1214D1B for ; Fri, 16 Jul 1999 22:39:29 -0700 (PDT) (envelope-from van.woerkom@netcologne.de) Received: (from marc@localhost) by oranje.my.domain (8.9.3/8.9.1) id HAA37878; Sat, 17 Jul 1999 07:36:02 +0200 (CEST) (envelope-from van.woerkom@netcologne.de) Date: Sat, 17 Jul 1999 07:36:02 +0200 (CEST) Message-Id: <199907170536.HAA37878@oranje.my.domain> X-Authentication-Warning: oranje.my.domain: marc set sender to van.woerkom@netcologne.de using -f From: Marc van Woerkom To: multimedia@FreeBSD.ORG Subject: FreeBSD: unlocked 3rd daemension Reply-To: van.woerkom@netcologne.de, marc@freeamp.org Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Consider this http://www.netcologne.de/~nc-vanwoma/riva-glx/freebsd3d my entry, if FreeBSD.org ever does a weird logo contest. I hope Kirk McKusik won't sue me for this.. ("Hey Kirk, it was late, there happened to be this 3d card in my box and I stumbled accross one of those Mesa demos, plus it is Friday evening, meaning I have one week of boring Win32 stuff behind me - I guess it was inevitable.." :) Regards, Marc To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Sat Jul 17 1: 4:18 1999 Delivered-To: freebsd-multimedia@freebsd.org Received: from herring.nlsystems.com (nlsys.demon.co.uk [158.152.125.33]) by hub.freebsd.org (Postfix) with ESMTP id 5AAE514D01; Sat, 17 Jul 1999 01:04:09 -0700 (PDT) (envelope-from dfr@nlsystems.com) Received: from salmon.nlsystems.com (salmon.nlsystems.com [10.0.0.3]) by herring.nlsystems.com (8.9.3/8.8.8) with ESMTP id IAA69131; Sat, 17 Jul 1999 08:52:36 +0100 (BST) (envelope-from dfr@nlsystems.com) Date: Sat, 17 Jul 1999 08:52:36 +0100 (BST) From: Doug Rabson To: van.woerkom@netcologne.de, marc@freeamp.org Cc: ohashi@mickey.ai.kyutech.ac.jp, osa@etrust.ru, multimedia@freebsd.org, ports@freebsd.org Subject: Re: riva-glx (3d hardware acceleration) port In-Reply-To: <199907161020.DAA03273@freeamp.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Fri, 16 Jul 1999 marc@freeamp.org wrote: > > The glx implementation has a couple of bugs too. It can't cope with > > 256x256 textures (a bug in the glx protocol code which is fixed in the > > current glx sources). > > I would like to sync with the latest sources and fill the patches directory > but I have had closer looks so far only on the nvidia stuff. > > Dunno anything more about glx origin than > > http://glx.on.openprojects.net/ > > (which is very Linux und Matrox G200 centric BTW) right now. > Will investigate tonight. This is where I have taken the sources from. They have integrated the tnt driver and are maintaining it as far as I can see. > > This link indicates that there is some benchmark suite available > > http://glx.on.openprojects.net/benchmarks.html > > and possibly there is also a GL testsuite somewhere. Don't know about that > > > > The tnt driver also doesn't support glTexCoord4f() > > but I have a fix for that. > > The packages for the RIVA 128 etc and TNT etc are the same. > For some reason they were just called riva-glx and riva_glx. > > I found that the visual bugs I experience are related to fonts > handling somehow. Different font, different effects. I have the same problems with fonts. > > Regards, > Marc > > P.S. > > Has email submission to freebsd.org been made been more strict? > > I found several emails defered in my /var/spool/mqueue > because hub.freebsd.org could not resolve my hostname > (which is not valid, as I my provider assigns IPs dynamically only and > assigns no systemnames) > > This was no problem before (I found a sendmail.cf to work around this) > since this week it is. I haven't noticed anything strange. You might try asking Jonathan Bresler who is in charge of all mail-related matters. -- Doug Rabson Mail: dfr@nlsystems.com Nonlinear Systems Ltd. Phone: +44 181 442 9037 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Sat Jul 17 10:22:14 1999 Delivered-To: freebsd-multimedia@freebsd.org Received: from qn-lpr2-98.quicknet.inet.fi (qn-lpr2-165.quicknet.inet.fi [194.251.102.165]) by hub.freebsd.org (Postfix) with ESMTP id 1324F14BF8 for ; Sat, 17 Jul 1999 10:22:08 -0700 (PDT) (envelope-from junki@qn-lpr2-165.quicknet.inet.fi) Received: from localhost (junki@localhost) by qn-lpr2-98.quicknet.inet.fi (8.9.3/8.9.1) with ESMTP id UAA00691 for ; Sat, 17 Jul 1999 20:21:52 +0300 (EEST) (envelope-from junki@qn-lpr2-165.quicknet.inet.fi) Date: Sat, 17 Jul 1999 20:21:52 +0300 (EEST) From: Juha Nurmela X-Sender: junki@pena.oh5nxo.ampr.org Reply-To: Juha.Nurmela@quicknet.inet.fi To: multimedia@freebsd.org Subject: AleVT (nice teletext viewer) workaround for bt848 Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=X-UNKNOWN Content-Transfer-Encoding: QUOTED-PRINTABLE Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hello. alevt works very nicely after taking out the sequence check. It even blits "=C4=E4li=F6 =E4l=E4 ly=F6, =F6=F6li=E4 l=E4ikkyy !" correctl= y. $ diff -c alev*/vbi.c.orig alev*/vbi.c *** alevt-1.4.4/vbi.c.orig Sat Jul 17 20:08:09 1999 --- alevt-1.4.4/vbi.c Sat Jul 17 20:07:49 1999 *************** *** 511,520 **** --- 511,522 ---- if (n !=3D vbi->bufsize) return; =20 + #if 0 seq =3D *(u32 *)&rawbuf[n - 4]; if (vbi->seq+1 !=3D seq) out_of_sync(vbi); vbi->seq =3D seq; + #endif =20 for (i =3D 0; i+BPL <=3D n; i +=3D BPL) vbi_line(vbi, rawbuf + i); To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message From owner-freebsd-multimedia Sat Jul 17 19:57:18 1999 Delivered-To: freebsd-multimedia@freebsd.org Received: from texorami.ghostwheel.com (texorami.ghostwheel.com [207.201.56.160]) by hub.freebsd.org (Postfix) with ESMTP id 33B7A14BE7 for ; Sat, 17 Jul 1999 19:57:15 -0700 (PDT) (envelope-from bsdmm@ghostwheel.com) Received: from avalon (avalon.ghostwheel.com [207.201.56.88]) by texorami.ghostwheel.com (8.9.3/8.9.3) with SMTP id TAA86036 for ; Sat, 17 Jul 1999 19:54:08 -0700 (PDT) (envelope-from bsdmm@ghostwheel.com) Message-Id: <4.1.19990717192254.00976700@pop.ghostwheel.com> X-Sender: bsdmm@pop.ghostwheel.com (Unverified) X-Mailer: QUALCOMM Windows Eudora Pro Version 4.1 Date: Sat, 17 Jul 1999 19:53:31 -0700 To: freebsd-multimedia@freebsd.org From: Chris Knight Subject: Seeking tools for use with a Win/TV card. Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Greetings, I have recently installed a Win/TV card in my FreeBSD box, and am looking for tools that would allow me to capture single frames, preferably with brightness controll or some mechanism for auto adjustment. I have modified the meteor capture tool at /usr/share/example/meteor, and it is working, but I will need to be aqble to adjust the brightness/contrast. I have also installed fxtv, which although it is fantastic, doesn't seem to do single frame captures. At least, not from what I see in the help display. The end goal is to be using the Win/TV card, in conjunction with a X-10 wireless video camera, for a webcam. Any suggestions or pointers appreciated. -ck To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message