From owner-freebsd-stable@FreeBSD.ORG Sat Jan 1 01:01:00 2005 Return-Path: Delivered-To: freebsd-stable@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 54E2C16A4CE for ; Sat, 1 Jan 2005 01:01:00 +0000 (GMT) Received: from smtp-vbr11.xs4all.nl (smtp-vbr11.xs4all.nl [194.109.24.31]) by mx1.FreeBSD.org (Postfix) with ESMTP id A33C343D2D for ; Sat, 1 Jan 2005 01:00:59 +0000 (GMT) (envelope-from rsmith@xs4all.nl) Received: from slackbox.xs4all.nl (slackbox.xs4all.nl [213.84.242.160]) by smtp-vbr11.xs4all.nl (8.12.11/8.12.11) with ESMTP id j0110wi4049099 for ; Sat, 1 Jan 2005 02:00:58 +0100 (CET) (envelope-from rsmith@xs4all.nl) Received: by slackbox.xs4all.nl (Postfix, from userid 1001) id 69E58630C; Sat, 1 Jan 2005 02:01:11 +0100 (CET) Date: Sat, 1 Jan 2005 02:01:11 +0100 From: Roland Smith To: freebsd-stable@freebsd.org Message-ID: <20050101010111.GA7319@slackbox.xs4all.nl> Mail-Followup-To: freebsd-stable@freebsd.org References: <20041229154905.GA1820@algol.adsl.nerim.net> <20041230083332.GA587@nosferatu.blackend.org> <20041231150712.GA1203@algol.adsl.nerim.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="MGYHOYXEY6WxJCY8" Content-Disposition: inline In-Reply-To: <20041231150712.GA1203@algol.adsl.nerim.net> User-Agent: Mutt/1.4.2.1i X-GPG-Fingerprint: 1A2B 477F 9970 BA3C 2914 B7CE 1277 EFB0 C321 A725 Organization: Me, organized? X-Virus-Scanned: by XS4ALL Virus Scanner Subject: Re: USB scanner not attached when connected after system startup] X-BeenThere: freebsd-stable@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Production branch of FreeBSD source code List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 01 Jan 2005 01:01:00 -0000 --MGYHOYXEY6WxJCY8 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Fri, Dec 31, 2004 at 04:07:12PM +0100, Harald Weis wrote: > On Thu, Dec 30, 2004 at 09:33:32AM +0100, Marc Fonvieille wrote: > > On Wed, Dec 29, 2004 at 04:49:05PM +0100, Harald Weis wrote: > > >=20 > > > My scanner (EPSON PERFECTION 1650) is working alright if it is connec= ted before system startup. > > > But when connected to the running system it doesn't get attached by u= sbd. I can't find out from Handbook, manpages or mailing lists what could b= e the reason. > > > > >=20 > > I assume you followed the Image Scanner section in the Handbook. > > Is usbd really running? Are you using the default usbd.conf? >=20 > In reply to both Marc and Roland, I confirm and say: >=20 > 1. usbd is really running all the time (usbd_enable=3D"YES" being in rc.c= onf) > 2. using the default usbd.conf, which I studied only recently to find out= what could be missing. > 3. added the following lines to it for testing: > device "Perfection 1650 scanner" > devname "uscanner[0-9]+" > attach "sane-find-scanner -q" > detach "sane-find-scanner -q" What are you trying to accomplish here? sane-find-scanner just lists the devices it finds. > I still haven't got a clue of what other command could be useful > here. I think Ialso understood that the proper attachment/detachment > function of usbd has nothing to do with those commands. Right or > wrong? On 5.3, I don't have to use usbd at all. The device node is created by devfs (on 5.3). You might have to do it manually on 4.x?. I use devfs.rules to make the scanner device available to a group usb, of which I'm a member, and that's it. Sane can use the scanner. For the record, my dll.conf looks like this: --------------------------- dll.conf ------------------------------- # Load the epson backend. epson --------------------------- dll.conf ------------------------------- And epson.conf contains just: -------------------------- epson.conf ------------------------------ usb /dev/uscanner0 -------------------------- epson.conf ------------------------------ > 4. Killing usbd and running ``usbd -dvv'' confirms that usbd does not > detect any event when I connect or disconnect the signal cable of the > scanner (needless to say that the scanner is connected to power). No > error message in the debugging output, just this: I usually do it the other way around. I keep the USB cable plugged in, and connect or disconnect the power to the transformer, because the 1650 doesn't have an on/off switch. Do you see anything in dmesg output after you plug in the scanner? Roland --=20 R.F. Smith /"\ ASCII Ribbon Campaign r s m i t h @ x s 4 a l l . n l \ / No HTML/RTF in email http://www.xs4all.nl/~rsmith/ X No Word docs in email / \ Respect for open standards --MGYHOYXEY6WxJCY8 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.0 (FreeBSD) iD8DBQFB1fZXEnfvsMMhpyURAjz+AJ0WnFEApFKvvkBfpAStrmc4ZVgK0QCfT3RV 5QBWb9EKvoN2kNmTKWKQuh8= =f73h -----END PGP SIGNATURE----- --MGYHOYXEY6WxJCY8-- From owner-freebsd-stable@FreeBSD.ORG Sat Jan 1 01:22:34 2005 Return-Path: Delivered-To: freebsd-stable@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4EFB216A4CE for ; Sat, 1 Jan 2005 01:22:34 +0000 (GMT) Received: from obsecurity.dyndns.org (CPE0050040655c8-CM00111ae02aac.cpe.net.cable.rogers.com [69.199.47.57]) by mx1.FreeBSD.org (Postfix) with ESMTP id 12A6343D1F for ; Sat, 1 Jan 2005 01:22:34 +0000 (GMT) (envelope-from kris@obsecurity.org) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id 3963251500; Fri, 31 Dec 2004 17:22:01 -0800 (PST) Date: Fri, 31 Dec 2004 17:22:00 -0800 From: Kris Kennaway To: Kris Kennaway , freebsd-stable@FreeBSD.org Message-ID: <20050101012200.GA95056@xor.obsecurity.org> References: <20041231190904.GA18620@meer.net> <20041231202929.GA13727@xor.obsecurity.org> <20041231235755.GA67655@meer.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="5vNYLRcllDrimb99" Content-Disposition: inline In-Reply-To: <20041231235755.GA67655@meer.net> User-Agent: Mutt/1.4.2.1i Subject: Re: ports directories are broken again? X-BeenThere: freebsd-stable@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Production branch of FreeBSD source code List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 01 Jan 2005 01:22:34 -0000 --5vNYLRcllDrimb99 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Fri, Dec 31, 2004 at 03:57:55PM -0800, Joe Rhett wrote: > > On Fri, Dec 31, 2004 at 11:09:04AM -0800, Joe Rhett wrote: > > > neptune.sv$ pkg_add -r frontpage > > > Error: FTP Unable to get ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386= /packages-5.3-release/Latest/frontpage.tbz: File unavailable (e.g., file no= t found, no access) > =20 > On Fri, Dec 31, 2004 at 12:29:29PM -0800, Kris Kennaway wrote: > > frontpage has not been packaged for years because a dependency > > (compat3x) is forbidden for security reasons. It looks like your > > expectations are broken here :) > =20 > I have no expecation other than that if the freebsd site indicates that a > package is available, that it should be there. It provides a link to a > supposed package, which does not exist. It provides a link to where the package would be if it exists. The web frontend has no knowledge of which packages are available at any given point in time because this set fluctuates on a daily basis, so the frontend is always going to have windows where it's out of date with respect to what's on the ftp site. One could imagine changing this with some hard work, or at least improving the documentation, but that's how things are today. You're welcome to submit a PR with your suggestion on how to change the documentation to annotate this. > And your comment of "for years" makes no sense when applied to versions of > the OS which haven't existed for more than a few months. (not that it > isn't true, but it certainly defies basic logic, no?) No, the ports tree is independent of the version of FreeBSD you're running. No version of FreeBSD has been able to produce a package of frontpage for a long time, because the package is not buildable in the underlying ports collection. Kris --5vNYLRcllDrimb99 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.6 (FreeBSD) iD4DBQFB1fs4Wry0BWjoQKURAvRTAJY3HRD1jylQPOpE0dmrDGUheHiDAJ0cEiSh YZS8M1aNmioSgVvWkpmpCQ== =5YaB -----END PGP SIGNATURE----- --5vNYLRcllDrimb99-- From owner-freebsd-stable@FreeBSD.ORG Sat Jan 1 01:29:22 2005 Return-Path: Delivered-To: freebsd-stable@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2A74F16A4CE for ; Sat, 1 Jan 2005 01:29:22 +0000 (GMT) Received: from obsecurity.dyndns.org (CPE0050040655c8-CM00111ae02aac.cpe.net.cable.rogers.com [69.199.47.57]) by mx1.FreeBSD.org (Postfix) with ESMTP id E499343D1F for ; Sat, 1 Jan 2005 01:29:21 +0000 (GMT) (envelope-from kris@obsecurity.org) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id 10ADC51473; Fri, 31 Dec 2004 17:28:49 -0800 (PST) Date: Fri, 31 Dec 2004 17:28:48 -0800 From: Kris Kennaway To: Kris Kennaway Message-ID: <20050101012848.GA5195@xor.obsecurity.org> References: <20041231190904.GA18620@meer.net> <20041231202929.GA13727@xor.obsecurity.org> <20041231235755.GA67655@meer.net> <20050101012200.GA95056@xor.obsecurity.org> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="0OAP2g/MAC+5xKAE" Content-Disposition: inline In-Reply-To: <20050101012200.GA95056@xor.obsecurity.org> User-Agent: Mutt/1.4.2.1i cc: freebsd-stable@FreeBSD.org Subject: Re: ports directories are broken again? X-BeenThere: freebsd-stable@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Production branch of FreeBSD source code List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 01 Jan 2005 01:29:22 -0000 --0OAP2g/MAC+5xKAE Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Fri, Dec 31, 2004 at 05:22:00PM -0800, Kris Kennaway wrote: > On Fri, Dec 31, 2004 at 03:57:55PM -0800, Joe Rhett wrote: > > > On Fri, Dec 31, 2004 at 11:09:04AM -0800, Joe Rhett wrote: > > > > neptune.sv$ pkg_add -r frontpage > > > > Error: FTP Unable to get ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-5.3-release/Latest/frontpage.tbz: File unavailable (e.g., file not found, no access) > > I have no expecation other than that if the freebsd site indicates that a > > package is available, that it should be there. It provides a link to a > > supposed package, which does not exist. BTW, where are you seeing this link? The port index under www.freebsd.org/ports *does* know that frontpage will not appear in packages, and doesn't provide a link to it. http://www.freebsd.org/ports/www.html Kris --0OAP2g/MAC+5xKAE Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.6 (FreeBSD) iD8DBQFB1fzQWry0BWjoQKURAsraAKCvreXp0ZwCjGaD9kyVatvRry19uACgj3rG b7BlfOndk2VO3qswSwrksxg= =Ge9L -----END PGP SIGNATURE----- --0OAP2g/MAC+5xKAE-- From owner-freebsd-stable@FreeBSD.ORG Sat Jan 1 04:33:43 2005 Return-Path: Delivered-To: freebsd-stable@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C40F416A4CF for ; Sat, 1 Jan 2005 04:33:43 +0000 (GMT) Received: from mail.el.net (mail.el.net [68.165.89.90]) by mx1.FreeBSD.org (Postfix) with SMTP id 115C243D31 for ; Sat, 1 Jan 2005 04:33:41 +0000 (GMT) (envelope-from kalin@el.net) Received: (qmail 93666 invoked by uid 1008); 1 Jan 2005 04:34:14 -0000 Received: from unknown (HELO mail.el.net) (127.0.0.1) by mail.el.net with SMTP; 1 Jan 2005 04:34:14 -0000 Received: from 68.165.89.73 (SquirrelMail authenticated user kalin@el.net); by mail.el.net with HTTP; Fri, 31 Dec 2004 23:34:14 -0500 (EST) Message-ID: <53879.68.165.89.73.1104554054.squirrel@68.165.89.73> Date: Fri, 31 Dec 2004 23:34:14 -0500 (EST) From: "kalin mintchev" To: freebsd-stable@freebsd.org User-Agent: SquirrelMail/1.4.3a X-Mailer: SquirrelMail/1.4.3a MIME-Version: 1.0 Content-Type: text/plain;charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Priority: 3 (Normal) Importance: Normal References: In-Reply-To: cc: freebsd-questions@freebsd.org Subject: BTX halted X-BeenThere: freebsd-stable@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Production branch of FreeBSD source code List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 01 Jan 2005 04:33:43 -0000 hi all... i'm trying to install 5.3 on an amd machine... i got the discs and they are ok but when i start the off the disk the boot stops with BTX halted no matter which boot mode i chose. i looked on google and i found a few posts about bios issues but non of that helped - i couldn't find how to disable DMA. the only location i saw the DMA mentioned was under PnP/PCI configurations => Resources Controlled by in the bios but there the setting is Auto(ESCD). i tried al the options there and it still stops at the same place... anybody can help?! thanks.... -- From owner-freebsd-stable@FreeBSD.ORG Sat Jan 1 09:06:56 2005 Return-Path: Delivered-To: freebsd-stable@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 77D7416A4CF for ; Sat, 1 Jan 2005 09:06:56 +0000 (GMT) Received: from rproxy.gmail.com (rproxy.gmail.com [64.233.170.196]) by mx1.FreeBSD.org (Postfix) with ESMTP id C177743D1D for ; Sat, 1 Jan 2005 09:06:55 +0000 (GMT) (envelope-from subhro.kar@gmail.com) Received: by rproxy.gmail.com with SMTP id g11so260774rne for ; Sat, 01 Jan 2005 01:06:55 -0800 (PST) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:from:to:cc:subject:date:mime-version:content-type:x-mailer:in-reply-to:x-mimeole:thread-index:message-id; b=U1GnYL4vVToBeZlIvAEkNDikMYrWV1FdHq6yHGlsFtBkt0ZTkHNPjBDe9mucT+xFdOhVIGOJF6gPXidDLvhUGsXbkJMXaFN9pdHKuBN0spfzIYjlpkoei8YLlqH67Xk1n1tYGHulrLHYyQivBGXWLDcrX6NoDXc2w9ctnq56/gw= Received: by 10.38.4.61 with SMTP id 61mr37609rnd; Sat, 01 Jan 2005 01:06:55 -0800 (PST) Received: from phoenix ([220.225.80.140]) by smtp.gmail.com with ESMTP id 63sm52845rna.2005.01.01.01.06.53; Sat, 01 Jan 2005 01:06:55 -0800 (PST) From: "Subhro" To: "'kalin mintchev'" , Date: Sat, 1 Jan 2005 14:36:45 +0530 Mime-Version: 1.0 Content-Type: multipart/signed; boundary="----=_NextPart_000_000C_01C4F00F.50D74F40" X-Mailer: Microsoft Office Outlook, Build 11.0.6353 In-Reply-To: <53879.68.165.89.73.1104554054.squirrel@68.165.89.73> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180 Thread-Index: AcTvu0gN9U5grg7FR62T/9U3zVnK7AAJdqrg Message-ID: <41d6682f.3a0d0492.1cd0.02e5@smtp.gmail.com> cc: freebsd-questions@freebsd.org Subject: RE: BTX halted X-BeenThere: freebsd-stable@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Production branch of FreeBSD source code List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 01 Jan 2005 09:06:56 -0000 This is a multi-part message in MIME format. ------=_NextPart_000_000C_01C4F00F.50D74F40 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit The first advice I would give is, go and trying flashing your BIOS with an updated version. Regards S. Indian Institute of Information Technology Subhro Sankha Kar Block AQ-13/1, Sector V Salt Lake City PIN 700091 India > -----Original Message----- > From: owner-freebsd-questions@freebsd.org [mailto:owner-freebsd- > questions@freebsd.org] On Behalf Of kalin mintchev > Sent: Saturday, January 01, 2005 10:04 > To: freebsd-stable@freebsd.org > Cc: freebsd-questions@freebsd.org > Subject: BTX halted > > hi all... > > i'm trying to install 5.3 on an amd machine... > i got the discs and they are ok but when i start the off the disk the boot > stops with BTX halted no matter which boot mode i chose. > i looked on google and i found a few posts about bios issues but non of > that helped - i couldn't find how to disable DMA. the only location i saw > the DMA mentioned was under PnP/PCI configurations => Resources Controlled > by in the bios but there the setting is Auto(ESCD). i tried al the options > there and it still stops at the same place... > > anybody can help?! > > thanks.... > > > -- > > > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions- > unsubscribe@freebsd.org" ------=_NextPart_000_000C_01C4F00F.50D74F40 Content-Type: application/x-pkcs7-signature; name="smime.p7s" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="smime.p7s" MIAGCSqGSIb3DQEHAqCAMIACAQExCzAJBgUrDgMCGgUAMIAGCSqGSIb3DQEHAQAAoIIJ4TCCAj0w ggGmAhEAzbp/VvDf5LxU/iKss3KqVTANBgkqhkiG9w0BAQIFADBfMQswCQYDVQQGEwJVUzEXMBUG A1UEChMOVmVyaVNpZ24sIEluYy4xNzA1BgNVBAsTLkNsYXNzIDEgUHVibGljIFByaW1hcnkgQ2Vy dGlmaWNhdGlvbiBBdXRob3JpdHkwHhcNOTYwMTI5MDAwMDAwWhcNMjgwODAxMjM1OTU5WjBfMQsw CQYDVQQGEwJVUzEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xNzA1BgNVBAsTLkNsYXNzIDEgUHVi bGljIFByaW1hcnkgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkwgZ8wDQYJKoZIhvcNAQEBBQADgY0A MIGJAoGBAOUZv22jVmEtmUhx9mfeuY3rt56GgAqRDvo4Ja9GiILlc6igmyRdDR/MZW4MsNBWhBiH mgabEKFz37RYOWtuwfYV1aioP6oSBo0xrH+wNNePNGeICc0UEeJORVZpH3gCgNrcR5EpuzbJY1zF 4Ncth3uhtzKwezC6Ki8xqu6jZ9rbAgMBAAEwDQYJKoZIhvcNAQECBQADgYEATD+4i8Zo3+5DMw5d 6abLB4RNejP/khv0Nq3YlSI2aBFsfELM85wuxAc/FLAPT/+Qknb54rxK6Y/NoIAK98Up8YIiXbix 3YEjo3slFUYweRb46gVLlH8dwhzI47f0EEA8E8NfH1PoSOSGtHuhNbB7Jbq4046rPzidADQAmPPR cZQwggNmMIICz6ADAgECAhANi0/uqtIYW/R1ap0p4X/7MA0GCSqGSIb3DQEBAgUAMF8xCzAJBgNV BAYTAlVTMRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE3MDUGA1UECxMuQ2xhc3MgMSBQdWJsaWMg UHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTAeFw05ODA1MTIwMDAwMDBaFw0wODA1MTIy MzU5NTlaMIHMMRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjEfMB0GA1UECxMWVmVyaVNpZ24gVHJ1 c3QgTmV0d29yazFGMEQGA1UECxM9d3d3LnZlcmlzaWduLmNvbS9yZXBvc2l0b3J5L1JQQSBJbmNv cnAuIEJ5IFJlZi4sTElBQi5MVEQoYyk5ODFIMEYGA1UEAxM/VmVyaVNpZ24gQ2xhc3MgMSBDQSBJ bmRpdmlkdWFsIFN1YnNjcmliZXItUGVyc29uYSBOb3QgVmFsaWRhdGVkMIGfMA0GCSqGSIb3DQEB AQUAA4GNADCBiQKBgQC7WkSKBBa7Vf0DeootlE8VeDa4DUqyb5xUv7zodyqdufBou5XZMUFweoFL uUgTVi3HCOGEQqvAopKrRFyqQvCCDgLpL/vCO7u+yScKXbawNkIztW5UiE+HSr8Z2vkV6A+Hthzj zMaajn9qJJLj/OBluqexfu/J2zdqyErICQbkmQIDAQABo4G0MIGxMBEGCWCGSAGG+EIBAQQEAwIB BjA1BgNVHR8ELjAsMCqgKKAmhiRodHRwOi8vY3JsLnZlcmlzaWduLmNvbS9wY2ExLjEuMS5jcmww RwYDVR0gBEAwPjA8BgtghkgBhvhFAQcBATAtMCsGCCsGAQUFBwIBFh93d3cudmVyaXNpZ24uY29t L3JlcG9zaXRvcnkvUlBBMA8GA1UdEwQIMAYBAf8CAQAwCwYDVR0PBAQDAgEGMA0GCSqGSIb3DQEB AgUAA4GBAEJ8Dt+MeUysvwjsTVUvUImgxV5OLl6VMpt5rWURCxxKUsTVqDEhjt4Qm2wIxQfmA7nn yDR4CQnyvAZC+FqMg9GK3qoi9dnjIdLPZYwGM7DNILIzzQq9PuGdwTWpZLCnpSRb6fFo6xPEfDf0 lGQNmsW9MxfvgzOgPuWqPq7Ycx+tMIIEMjCCA5ugAwIBAgIQOo5O0s00DtVmctud5DTy6zANBgkq hkiG9w0BAQUFADCBzDEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xHzAdBgNVBAsTFlZlcmlTaWdu IFRydXN0IE5ldHdvcmsxRjBEBgNVBAsTPXd3dy52ZXJpc2lnbi5jb20vcmVwb3NpdG9yeS9SUEEg SW5jb3JwLiBCeSBSZWYuLExJQUIuTFREKGMpOTgxSDBGBgNVBAMTP1ZlcmlTaWduIENsYXNzIDEg Q0EgSW5kaXZpZHVhbCBTdWJzY3JpYmVyLVBlcnNvbmEgTm90IFZhbGlkYXRlZDAeFw0wNDExMTEw MDAwMDBaFw0wNTA3MTgyMzU5NTlaMIIBEjEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xHzAdBgNV BAsTFlZlcmlTaWduIFRydXN0IE5ldHdvcmsxRjBEBgNVBAsTPXd3dy52ZXJpc2lnbi5jb20vcmVw b3NpdG9yeS9SUEEgSW5jb3JwLiBieSBSZWYuLExJQUIuTFREKGMpOTgxHjAcBgNVBAsTFVBlcnNv bmEgTm90IFZhbGlkYXRlZDE0MDIGA1UECxMrRGlnaXRhbCBJRCBDbGFzcyAxIC0gTWljcm9zb2Z0 IEZ1bGwgU2VydmljZTETMBEGA1UEAxQKU3ViaHJvIEthcjEjMCEGCSqGSIb3DQEJARYUc3ViaHJv LmthckBnbWFpbC5jb20wgZ8wDQYJKoZIhvcNAQEBBQADgY0AMIGJAoGBAKzp0P4Gh5arpymZu4cW FUb1gQ+qcJtb5B788xi2oskigeKdCgj9tiw5VdAW2rXoOO435Ch2mjBylJb49TFDfy636Fw0F5ij VuyIwtVQQANoiMICBZ8MIZyrBSK9/PyoHeITsnIoCucE4qYGkLL3CYzijoU/iZGwAS0iif7H2jJL AgMBAAGjgcswgcgwCQYDVR0TBAIwADBEBgNVHSAEPTA7MDkGC2CGSAGG+EUBBxcDMCowKAYIKwYB BQUHAgEWHGh0dHBzOi8vd3d3LnZlcmlzaWduLmNvbS9ycGEwCwYDVR0PBAQDAgWgMB0GA1UdJQQW MBQGCCsGAQUFBwMEBggrBgEFBQcDAjAUBgpghkgBhvhFAQYHBAYWBE5vbmUwMwYDVR0fBCwwKjAo oCagJIYiaHR0cDovL2NybC52ZXJpc2lnbi5jb20vY2xhc3MxLmNybDANBgkqhkiG9w0BAQUFAAOB gQBdijWu576noKjQbr0tQSROebsGab9JvR9rh3t9WagovURLjgi6zX/U6IxUSEXi4ECXtSZtEFpL 6yNUq+/mxEXvG7RX0Pe0T5iULmJxxrzO3Qvnc0UJJHKaYd5F4JD3c6YanGjwx3vDEfDQT8pzxHtb PXp6n18sFnbfiFG0ytSKPjGCBD4wggQ6AgEBMIHhMIHMMRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5j LjEfMB0GA1UECxMWVmVyaVNpZ24gVHJ1c3QgTmV0d29yazFGMEQGA1UECxM9d3d3LnZlcmlzaWdu LmNvbS9yZXBvc2l0b3J5L1JQQSBJbmNvcnAuIEJ5IFJlZi4sTElBQi5MVEQoYyk5ODFIMEYGA1UE AxM/VmVyaVNpZ24gQ2xhc3MgMSBDQSBJbmRpdmlkdWFsIFN1YnNjcmliZXItUGVyc29uYSBOb3Qg VmFsaWRhdGVkAhA6jk7SzTQO1WZy253kNPLrMAkGBSsOAwIaBQCgggKyMBgGCSqGSIb3DQEJAzEL BgkqhkiG9w0BBwEwHAYJKoZIhvcNAQkFMQ8XDTA1MDEwMTA5MDY0NFowIwYJKoZIhvcNAQkEMRYE FCbKAobuATH+cWiJ5AWJ4n0VJYh2MGcGCSqGSIb3DQEJDzFaMFgwCgYIKoZIhvcNAwcwDgYIKoZI hvcNAwICAgCAMA0GCCqGSIb3DQMCAgFAMAcGBSsOAwIHMA0GCCqGSIb3DQMCAgEoMAcGBSsOAwIa MAoGCCqGSIb3DQIFMIHyBgkrBgEEAYI3EAQxgeQwgeEwgcwxFzAVBgNVBAoTDlZlcmlTaWduLCBJ bmMuMR8wHQYDVQQLExZWZXJpU2lnbiBUcnVzdCBOZXR3b3JrMUYwRAYDVQQLEz13d3cudmVyaXNp Z24uY29tL3JlcG9zaXRvcnkvUlBBIEluY29ycC4gQnkgUmVmLixMSUFCLkxURChjKTk4MUgwRgYD VQQDEz9WZXJpU2lnbiBDbGFzcyAxIENBIEluZGl2aWR1YWwgU3Vic2NyaWJlci1QZXJzb25hIE5v dCBWYWxpZGF0ZWQCEDqOTtLNNA7VZnLbneQ08uswgfQGCyqGSIb3DQEJEAILMYHkoIHhMIHMMRcw FQYDVQQKEw5WZXJpU2lnbiwgSW5jLjEfMB0GA1UECxMWVmVyaVNpZ24gVHJ1c3QgTmV0d29yazFG MEQGA1UECxM9d3d3LnZlcmlzaWduLmNvbS9yZXBvc2l0b3J5L1JQQSBJbmNvcnAuIEJ5IFJlZi4s TElBQi5MVEQoYyk5ODFIMEYGA1UEAxM/VmVyaVNpZ24gQ2xhc3MgMSBDQSBJbmRpdmlkdWFsIFN1 YnNjcmliZXItUGVyc29uYSBOb3QgVmFsaWRhdGVkAhA6jk7SzTQO1WZy253kNPLrMA0GCSqGSIb3 DQEBAQUABIGAi+DxgMNoB0hQ4A3gJpdACmHAIeMM1gxuxKfUdReI2nba1dcfrhv99IK2JL96BHjr oYOXd38ALngxPahIsCtyy0cocZ/auNWkcQkAK66HkoSYaknF9LyPgK3pVI2/Q4nta2yAl2e+XFbh ffH+v7PkvUI86rfCuTIh1UPK1iEOiXoAAAAAAAA= ------=_NextPart_000_000C_01C4F00F.50D74F40-- From owner-freebsd-stable@FreeBSD.ORG Sat Jan 1 09:48:57 2005 Return-Path: Delivered-To: freebsd-stable@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0E20A16A4CE; Sat, 1 Jan 2005 09:48:57 +0000 (GMT) Received: from amsfep20-int.chello.nl (amsfep20-int.chello.nl [213.46.243.18]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4FE7543D39; Sat, 1 Jan 2005 09:48:55 +0000 (GMT) (envelope-from j.molinger@chello.nl) Received: from [10.168.12.171] (really [80.57.106.6]) by amsfep20-int.chello.nlESMTP <20050101094853.RPJI17892.amsfep20-int.chello.nl@[10.168.12.171]>; Sat, 1 Jan 2005 10:48:53 +0100 Message-ID: <41D67211.1090605@chello.nl> Date: Sat, 01 Jan 2005 01:49:05 -0800 From: Jeroen Molinger User-Agent: Mozilla Thunderbird 0.8 (Windows/20040913) X-Accept-Language: en-us, en MIME-Version: 1.0 To: Rong-En Fan References: <6eb82e04122207187e0305c4@mail.gmail.com> In-Reply-To: <6eb82e04122207187e0305c4@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit cc: stable@freebsd.org cc: scottl@freebsd.org cc: scsi@freebsd.org Subject: Re: IBM ServeRAID 7k & 5.3 X-BeenThere: freebsd-stable@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Production branch of FreeBSD source code List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 01 Jan 2005 09:48:57 -0000 Rong-En Fan wrote: >[just for a record] > >Hi all, > >It seems ips(4) doesn't support ServeRAID 7k, however I just >installed 5.3-RELEASE/i386 on IBM x236 which has ServeRAID >7k installed. Everything looks fine here (I'm running RAID-5 over >4 HDDs). > >A little problem is that once a HDD fails, FreeBSD doesn't >know that unless I reboot it and saw the ips state is DEGRADED. > > >pciconf & dmesg are listed as below: > >ips0@pci3:14:0: class=0x010400 card=0x028e1014 chip=0x02509005 rev=0x07 hdr=0x00 > vendor = 'Adaptec Inc' > class = mass storage > subclass = RAID > >ips0: mem 0xcfffd000-0xcfffdfff irq 38 at >device 14.0 on pci3 >ips0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xcfffd000 >ips0: [GIANT-LOCKED] >ips0: logical drives: 1 >ips0: Logical Drive 0: RAID5 sectors: 430116864, state OK >ipsd0: on ips0 >ipsd0: Logical Drive (210018MB) > >Regards, >Rong-En Fan >_______________________________________________ >freebsd-scsi@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-scsi >To unsubscribe, send any mail to "freebsd-scsi-unsubscribe@freebsd.org" > > > > Hai Scott, Do you know when the 7K will be fully supported. I got a note from IBM that they will discontinue the ServerRAID 6M series. Best Regards Jeroen Molinger From owner-freebsd-stable@FreeBSD.ORG Sat Jan 1 12:17:22 2005 Return-Path: Delivered-To: freebsd-stable@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B65CC16A4CE for ; Sat, 1 Jan 2005 12:17:22 +0000 (GMT) Received: from central.local.mattsnetwork.co.uk (mattsnetwork.co.uk [82.152.151.201]) by mx1.FreeBSD.org (Postfix) with ESMTP id C972A43D46 for ; Sat, 1 Jan 2005 12:17:21 +0000 (GMT) (envelope-from matt@mattsnetwork.co.uk) Received: from workstation1.local.mattsnetwork.co.uk (workstation1.local.mattsnetwork.co.uk [192.168.0.148]) (authenticated bits=0)j01CHDtJ088777 (version=TLSv1/SSLv3 cipher=DHE-DSS-AES256-SHA bits=256 verify=NO) for ; Sat, 1 Jan 2005 12:17:13 GMT (envelope-from matt@mattsnetwork.co.uk) From: Matt Dawson To: freebsd-stable@FreeBSD.org Date: Sat, 1 Jan 2005 12:17:13 +0000 User-Agent: KMail/1.7.2 X-Face: Zrm9At!%e{M_#Po+[-\; RFQih#L0/\!^6f8JS_1Nz,8`(@bR%|T,c)3:o6my`.sy$Rt)'^)ec9cWp!MmeH^Gp|Afl)BkcH1GENCBqb&wZ$cdqN27uYfD=jU@1:vWXf|)LmuVKo?1wuS68KeDX&3,#wZP2$N1Ao!_'mZOws67 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200501011217.13171.matt@mattsnetwork.co.uk> X-Spam-Status: No, score=-2.8 required=2.5 tests=ALL_TRUSTED autolearn=failed version=3.0.1 X-Spam-Checker-Version: SpamAssassin 3.0.1 (2004-10-22) on central.local.mattsnetwork.co.uk X-Virus-Scanned: ClamAV 0.80/640/Thu Dec 23 18:48:27 2004 clamav-milter version 0.80j18:48:27 2004 clamav-milter version 0.80j o X-Virus-Status: Clean Subject: MFCs? X-BeenThere: freebsd-stable@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Production branch of FreeBSD source code List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 01 Jan 2005 12:17:22 -0000 Hi all, Is there any chance we will see the new ath, 802.11 and ITE (Gigabyte) RAID MFC'd into 5.x sometime in the future, or is this new stuff going to mean running -CURRENT? -- Matt Dawson. matt@mattsnetwork.co.uk MD2657-RIPE OpenNIC M_D9 From owner-freebsd-stable@FreeBSD.ORG Sat Jan 1 12:33:20 2005 Return-Path: Delivered-To: freebsd-stable@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D7C9916A4CE for ; Sat, 1 Jan 2005 12:33:20 +0000 (GMT) Received: from gw01.mail.saunalahti.fi (gw01.mail.saunalahti.fi [195.197.172.115]) by mx1.FreeBSD.org (Postfix) with ESMTP id 04DCE43D46 for ; Sat, 1 Jan 2005 12:33:20 +0000 (GMT) (envelope-from pertti.kosunen@pp.nic.fi) Received: from [127.0.0.1] (KMMLXXXI.dsl.saunalahti.fi [62.142.71.181]) by gw01.mail.saunalahti.fi (Postfix) with ESMTP id E9F7DACEB5 for ; Sat, 1 Jan 2005 14:33:18 +0200 (EET) Message-ID: <41D6988F.2000604@pp.nic.fi> Date: Sat, 01 Jan 2005 14:33:19 +0200 From: Pertti Kosunen User-Agent: Mozilla Thunderbird 1.0 / FreeBSD 5.3 X-Accept-Language: en-us, en MIME-Version: 1.0 To: "freebsd-stable@freebsd.org" Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: [Fwd: Re: ad2: FAILURE - READ_DMA, but CD on slave controller recognized?] X-BeenThere: freebsd-stable@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Production branch of FreeBSD source code List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 01 Jan 2005 12:33:21 -0000 C. Fischer wrote: >this has started bugging me ever since moving from 4-stable to 5-stable. >"ad2", which had been recognized no problem on the former, fails on the >latter. since i have a multibooter, i can boot 4.10 residing on "ad2" without >trouble. 4.10 can access "ad0" and "ad1" fine (this is how i got the initial >install in place), but i used "ad2" for backups and this doesn't work anymore. > >the system otherwise works and there are no DMA related hardware errors ever >reported except for "ad2" not beeing recognized. this seems to indicate that >the problem lies in the initial disk checking phase. It's pretty common problem with 5.3, one solution is to: Disable DMA for boot. cat /boot/loader.conf hw.ata.ata_dma="0" hw.ata.atapi_dma="0" And enable first channel DMA later. cat /etc/rc.local atacontrol mode 0 udma4 udma4 http://lists.freebsd.org/pipermail/freebsd-stable/ Searchs previous messages for other workarounds. Disabling APIC might help. From owner-freebsd-stable@FreeBSD.ORG Sat Jan 1 12:57:36 2005 Return-Path: Delivered-To: freebsd-stable@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id F06C816A4CE for ; Sat, 1 Jan 2005 12:57:36 +0000 (GMT) Received: from zaphod.nitro.dk (port324.ds1-khk.adsl.cybercity.dk [212.242.113.79]) by mx1.FreeBSD.org (Postfix) with ESMTP id A0ACF43D2D for ; Sat, 1 Jan 2005 12:57:36 +0000 (GMT) (envelope-from simon@zaphod.nitro.dk) Received: by zaphod.nitro.dk (Postfix, from userid 3000) id 8EFC611D79; Sat, 1 Jan 2005 13:57:35 +0100 (CET) Date: Sat, 1 Jan 2005 13:57:35 +0100 From: "Simon L. Nielsen" To: Matt Dawson Message-ID: <20050101125734.GF761@zaphod.nitro.dk> References: <200501011217.13171.matt@mattsnetwork.co.uk> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="+KJYzRxRHjYqLGl5" Content-Disposition: inline In-Reply-To: <200501011217.13171.matt@mattsnetwork.co.uk> User-Agent: Mutt/1.5.6i cc: freebsd-stable@FreeBSD.org Subject: Re: MFCs? X-BeenThere: freebsd-stable@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Production branch of FreeBSD source code List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 01 Jan 2005 12:57:37 -0000 --+KJYzRxRHjYqLGl5 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On 2005.01.01 12:17:13 +0000, Matt Dawson wrote: > Is there any chance we will see the new ath, 802.11 and ITE (Gigabyte) R= AID=20 > MFC'd into 5.x sometime in the future, or is this new stuff going to mean= =20 > running -CURRENT? Sam has already said that the wlan parts will not be MFC'ed since they break the API/ABI. I would suspect (read I don't know for sure and it's S=F8ren's call) that the ata changes are going to MFC'ed, but since there are some quirks in the ata code in CURRENT at the moment, which are being worked on, I wouldn't hold my breath for the MFC. --=20 Simon L. Nielsen --+KJYzRxRHjYqLGl5 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.6 (FreeBSD) iD8DBQFB1p4+h9pcDSc1mlERAusfAKC6Axy97SLaqGk1Km654+PJCZBDaQCfaUM7 3Mj4GUZ0fUlOB/9tD0e+s+o= =0kRS -----END PGP SIGNATURE----- --+KJYzRxRHjYqLGl5-- From owner-freebsd-stable@FreeBSD.ORG Sat Jan 1 13:14:41 2005 Return-Path: Delivered-To: freebsd-stable@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E1EA116A4E0; Sat, 1 Jan 2005 13:14:41 +0000 (GMT) Received: from central.local.mattsnetwork.co.uk (mattsnetwork.co.uk [82.152.151.201]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0038C43D2F; Sat, 1 Jan 2005 13:14:40 +0000 (GMT) (envelope-from matt@mattsnetwork.co.uk) Received: from workstation2.local.mattsnetwork.co.uk (workstation2.local.mattsnetwork.co.uk [192.168.0.142]) (authenticated bits=0)j01DEU6v088924 (version=TLSv1/SSLv3 cipher=DHE-DSS-AES256-SHA bits=256 verify=NO); Sat, 1 Jan 2005 13:14:31 GMT (envelope-from matt@mattsnetwork.co.uk) From: Matt Dawson To: "Simon L. Nielsen" Date: Sat, 1 Jan 2005 13:14:30 +0000 User-Agent: KMail/1.7.2 References: <200501011217.13171.matt@mattsnetwork.co.uk> <20050101125734.GF761@zaphod.nitro.dk> In-Reply-To: <20050101125734.GF761@zaphod.nitro.dk> X-Face: Zrm9At!%e{M_#Po+[-\; RFQih#L0/\!^6f8JS_1Nz,8`(@bR%|T,c)3:o6my`.sy$Rt)'^)ec9cWp!MmeH^Gp|Afl)BkcH1GENCBqb&wZ$cdqN27uYfD=jU@1:vWXf|)LmuVKo?1wuS68KeDX&3,#wZP2$N1Ao!_'mZOws67 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Message-Id: <200501011314.30584.matt@mattsnetwork.co.uk> X-Spam-Status: No, score=-2.8 required=2.5 tests=ALL_TRUSTED autolearn=failed version=3.0.1 X-Spam-Checker-Version: SpamAssassin 3.0.1 (2004-10-22) on central.local.mattsnetwork.co.uk X-Virus-Scanned: ClamAV 0.80/640/Thu Dec 23 18:48:27 2004 clamav-milter version 0.80j18:48:27 2004 clamav-milter version 0.80j o X-Virus-Status: Clean cc: freebsd-stable@freebsd.org Subject: Re: MFCs? X-BeenThere: freebsd-stable@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Production branch of FreeBSD source code List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 01 Jan 2005 13:14:42 -0000 On Saturday 01 Jan 2005 12:57, Simon L. Nielsen wrote: > Sam has already said that the wlan parts will not be MFC'ed since they > break the API/ABI. Hmm, that's what I thought. It seemed to touch too many other bits of the=20 networking code to be that simple. I will stick with 5.x for now. The ath=20 board is in the server providing hostap service. It would have been nice to= =20 have proper 54Mbps support instead of the current 11Mbps, but I can't risk= =20 all the other services this box runs breaking. Ah well... > > I would suspect (read I don't know for sure and it's S=F8ren's call) > that the ata changes are going to MFC'ed, but since there are some > quirks in the ata code in CURRENT at the moment, which are being > worked on, I wouldn't hold my breath for the MFC. I won't. I don't use the ITE RAID on the Gigabyte board anyway, and the=20 support for the VIA SATA is rock-solid. The reason I wanted to know was tha= t=20 I found this board to be solid and stable and it would be nice to be able t= o=20 recommend an AMD64 board with 100% support. Even the ACPI is flawless on th= is=20 board. Its one let-down is the ITE device which doesn't even work as a norm= al=20 ATA controller. Yes, OK, I should be running -CURRENT with an AMD64 anyway, I know ;-) Thanks for the information. =2D-=20 Matt Dawson. matt@mattsnetwork.co.uk MD2657-RIPE OpenNIC M_D9 From owner-freebsd-stable@FreeBSD.ORG Sat Jan 1 15:56:13 2005 Return-Path: Delivered-To: freebsd-stable@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 33E5416A4CE; Sat, 1 Jan 2005 15:56:13 +0000 (GMT) Received: from pooker.samsco.org (pooker.samsco.org [168.103.85.57]) by mx1.FreeBSD.org (Postfix) with ESMTP id BC1E643D45; Sat, 1 Jan 2005 15:56:12 +0000 (GMT) (envelope-from scottl@freebsd.org) Received: from [192.168.254.11] (junior-wifi.samsco.home [192.168.254.11]) (authenticated bits=0) by pooker.samsco.org (8.12.11/8.12.10) with ESMTP id j01Fwd5Y002029; Sat, 1 Jan 2005 08:58:41 -0700 (MST) (envelope-from scottl@freebsd.org) Message-ID: <41D6C7BF.7030405@freebsd.org> Date: Sat, 01 Jan 2005 08:54:39 -0700 From: Scott Long User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.7.2) Gecko/20040929 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Jeroen Molinger References: <6eb82e04122207187e0305c4@mail.gmail.com> <41D67211.1090605@chello.nl> In-Reply-To: <41D67211.1090605@chello.nl> X-Enigmail-Version: 0.86.1.0 X-Enigmail-Supports: pgp-inline, pgp-mime Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit X-Spam-Status: No, hits=0.0 required=3.8 tests=none autolearn=no version=2.63 X-Spam-Checker-Version: SpamAssassin 2.63 (2004-01-11) on pooker.samsco.org cc: stable@freebsd.org cc: Rong-En Fan cc: scsi@freebsd.org Subject: Re: IBM ServeRAID 7k & 5.3 X-BeenThere: freebsd-stable@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Production branch of FreeBSD source code List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 01 Jan 2005 15:56:13 -0000 Jeroen Molinger wrote: > Rong-En Fan wrote: > >> [just for a record] >> >> Hi all, >> >> It seems ips(4) doesn't support ServeRAID 7k, however I just >> installed 5.3-RELEASE/i386 on IBM x236 which has ServeRAID >> 7k installed. Everything looks fine here (I'm running RAID-5 over >> 4 HDDs). >> >> A little problem is that once a HDD fails, FreeBSD doesn't >> know that unless I reboot it and saw the ips state is DEGRADED. >> >> >> pciconf & dmesg are listed as below: >> >> ips0@pci3:14:0: class=0x010400 card=0x028e1014 chip=0x02509005 >> rev=0x07 hdr=0x00 >> vendor = 'Adaptec Inc' >> class = mass storage >> subclass = RAID >> >> ips0: mem 0xcfffd000-0xcfffdfff irq 38 at >> device 14.0 on pci3 >> ips0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xcfffd000 >> ips0: [GIANT-LOCKED] >> ips0: logical drives: 1 >> ips0: Logical Drive 0: RAID5 sectors: 430116864, state OK >> ipsd0: on ips0 >> ipsd0: Logical Drive (210018MB) >> >> Regards, >> Rong-En Fan >> _______________________________________________ >> freebsd-scsi@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-scsi >> To unsubscribe, send any mail to "freebsd-scsi-unsubscribe@freebsd.org" >> >> >> >> > Hai Scott, > > Do you know when the 7K will be fully supported. I got a note from IBM > that they will discontinue the ServerRAID 6M series. > > Best Regards > > Jeroen Molinger I guess that by 'support' that you are referring to the problem with it not seeing a failed drive? I really have no idea how that is supposed to work, if at all. Scott From owner-freebsd-stable@FreeBSD.ORG Sat Jan 1 15:58:35 2005 Return-Path: Delivered-To: freebsd-stable@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E8BE816A4CE for ; Sat, 1 Jan 2005 15:58:35 +0000 (GMT) Received: from digger1.defence.gov.au (digger1.defence.gov.au [203.5.217.4]) by mx1.FreeBSD.org (Postfix) with ESMTP id 147D143D1F for ; Sat, 1 Jan 2005 15:58:34 +0000 (GMT) (envelope-from wilkinsa@squash.dsto.defence.gov.au) Received: from ednmsw503.dsto.defence.gov.au (ednmsw503.dsto.defence.gov.au [131.185.2.150]) by digger1.defence.gov.au with ESMTP id j01FvP1A019125 for ; Sun, 2 Jan 2005 02:27:25 +1030 (CST) Received: from muttley.dsto.defence.gov.au (unverified) by ednmsw503.dsto.defence.gov.au (Content Technologies SMTPRS 4.3.10) with ESMTP id ; Sun, 2 Jan 2005 02:28:26 +1030 Received: from ednex501.dsto.defence.gov.au (ednex501.dsto.defence.gov.au [131.185.2.81]) by muttley.dsto.defence.gov.au (8.11.3/8.11.3) with ESMTP id j01FrfQ22053; Sun, 2 Jan 2005 02:23:41 +1030 (CST) Received: from squash.dsto.defence.gov.au ([131.185.40.212]) by ednex501.dsto.defence.gov.au with SMTP (Microsoft Exchange Internet Mail Service Version 5.5.2653.13) id YK37P7QF; Sun, 2 Jan 2005 02:23:39 +1030 Received: from squash.dsto.defence.gov.au (localhost [127.0.0.1]) by squash.dsto.defence.gov.au (8.12.11/8.12.11) with ESMTP id j01FsKqd035131 ; Sun, 2 Jan 2005 02:24:20 +1030 (CST) (envelope-from wilkinsa@squash.dsto.defence.gov.au) Received: (from wilkinsa@localhost) by squash.dsto.defence.gov.au (8.12.11/8.12.11/Submit) id j01FsJ4Z035130; Sun, 2 Jan 2005 02:24:19 +1030 (CST) (envelope-from wilkinsa) Date: Sun, 2 Jan 2005 02:24:19 +1030 From: "Wilkinson, Alex" To: Palle Girgensohn Message-ID: <20050101155419.GH34509@squash.dsto.defence.gov.au> Mail-Followup-To: Palle Girgensohn , Paul Mather , stable@freebsd.org References: <05F0F09DEB66858D9B452FB8@palle.girgensohn.se> <20041229203601.GD10293@odin.ac.hmc.edu> <20041229210110.GA16903@odin.ac.hmc.edu> <44633F1A12BF90A756A3AB0F@palle.girgensohn.se> <41D323CF.8070701@gromit.dlib.vt.edu> <20041230173656.GA2423@doom.homeunix.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Disposition: inline In-Reply-To: <20041230173656.GA2423@doom.homeunix.org> User-Agent: Mutt/1.5.6i cc: stable@freebsd.org Subject: Re: how to remote update 4.10 -> 5.3? X-BeenThere: freebsd-stable@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Production branch of FreeBSD source code List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 01 Jan 2005 15:58:36 -0000 0n Thu, Dec 30, 2004 at 08:36:56PM +0300, Igor Pokrovsky wrote: >On Wed, Dec 29, 2004 at 04:38:23PM -0500, Paul Mather wrote: >> Palle Girgensohn wrote: >> >> >I've tried the UPDATING instructions, both locally and remotely (the >> >latter failed ;-). But really, everything has to be reinstalled, ports >> >and the lot, so a new install is probably the best way... >> > >> >> That's not so bad. A reinstall means you can newfs your partitions as >> UFS2 filesystems, which wouldn't be the case if you upgraded 4.10 in-place. > >Are there any other advantages of UFS2 over UFS except maximum disk size? http://lists.freebsd.org/pipermail/freebsd-current/2003-April/001444.html - aW From owner-freebsd-stable@FreeBSD.ORG Sat Jan 1 17:35:40 2005 Return-Path: Delivered-To: freebsd-stable@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 928DD16A4CE for ; Sat, 1 Jan 2005 17:35:40 +0000 (GMT) Received: from rader.servnow.com (rader.servnow.com [69.93.129.4]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1666843D39 for ; Sat, 1 Jan 2005 17:35:40 +0000 (GMT) (envelope-from mikes@siralan.org) Received: from 12-210-221-89.client.insightbb.com ([12.210.221.89] helo=familysquires.net) by rader.servnow.com with esmtps (TLSv1:AES256-SHA:256) (Exim 4.43) id 1CknA8-0008Il-1d for freebsd-stable@freebsd.org; Sat, 01 Jan 2005 12:35:36 -0500 Date: Sat, 1 Jan 2005 12:35:37 -0500 (EST) From: "Michael L. Squires" X-X-Sender: mikes@familysquires.net To: freebsd-stable@freebsd.org In-Reply-To: <41D6C7BF.7030405@freebsd.org> Message-ID: <20050101123004.E35628@familysquires.net> References: <6eb82e04122207187e0305c4@mail.gmail.com> <41D67211.1090605@chello.nl> <41D6C7BF.7030405@freebsd.org> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - rader.servnow.com X-AntiAbuse: Original Domain - freebsd.org X-AntiAbuse: Originator/Caller UID/GID - [0 0] / [47 12] X-AntiAbuse: Sender Address Domain - siralan.org X-Source: X-Source-Args: X-Source-Dir: Subject: LINUX base upgrade and rpm 4.04 port X-BeenThere: freebsd-stable@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Production branch of FreeBSD source code List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 01 Jan 2005 17:35:40 -0000 For security reasons the linux-base version has been updated from 7 to 8; when I follow the instructions in /usr/ports/UPDATING I get a message from the linux-8 make process that I should have first installed rpm 4.0.4 (apparently /var/lib/rpm/packages.rpm is in db1 format, and linux-8 wants it in db3 format; also, the user "rpm" is apparently missing). Should rpm 4.0.4 be installed before updating, or after, or not at all? Mike Squires From owner-freebsd-stable@FreeBSD.ORG Sat Jan 1 18:10:13 2005 Return-Path: Delivered-To: freebsd-stable@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1F35916A4CE for ; Sat, 1 Jan 2005 18:10:13 +0000 (GMT) Received: from av8-1-sn3.vrr.skanova.net (av8-1-sn3.vrr.skanova.net [81.228.9.183]) by mx1.FreeBSD.org (Postfix) with ESMTP id D707E43D3F for ; Sat, 1 Jan 2005 18:10:11 +0000 (GMT) (envelope-from joel@automatvapen.se) Received: by av8-1-sn3.vrr.skanova.net (Postfix, from userid 502) id A417B37FAD; Sat, 1 Jan 2005 19:10:10 +0100 (CET) Received: from smtp3-1-sn3.vrr.skanova.net (smtp3-1-sn3.vrr.skanova.net [81.228.9.101]) by av8-1-sn3.vrr.skanova.net (Postfix) with ESMTP id 8A41B37F71 for ; Sat, 1 Jan 2005 19:10:10 +0100 (CET) Received: from t8o55p4.telia.com (t8o55p4.telia.com [81.225.220.124]) by smtp3-1-sn3.vrr.skanova.net (Postfix) with ESMTP id 80AC537E42 for ; Sat, 1 Jan 2005 19:10:07 +0100 (CET) From: Joel Dahl To: "freebsd-stable@freebsd.org" Content-Type: multipart/mixed; boundary="=-RpgTlD6jpYIXk2fyXbTf" Date: Sat, 01 Jan 2005 19:06:31 +0100 Message-Id: <1104602791.571.17.camel@dude.automatvapen.se> Mime-Version: 1.0 X-Mailer: Evolution 2.0.2 FreeBSD GNOME Team Port Subject: RELENG_5: Fatal trap 12: page fault while in kernel mode X-BeenThere: freebsd-stable@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Production branch of FreeBSD source code List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 01 Jan 2005 18:10:13 -0000 --=-RpgTlD6jpYIXk2fyXbTf Content-Type: text/plain Content-Transfer-Encoding: 7bit I got this when I tried to blank a CD with burncd, and I can reproduce it. Most of it is written by hand, and I'm no debugger guru, so here goes... This is RELENG_5, cvsup'ed and built today (dmesg is attached): # uname -a FreeBSD dude.automatvapen.se 5.3-STABLE FreeBSD 5.3-STABLE #0: Sat Jan 1 14:36:28 CET 2005 joel@dude.automatvapen.se:/usr/obj/usr/src/sys/WRK i386 # burncd -f /dev/acd0 blank fixate blanking CD - 100% done fixating CD, please wait.. kernel trap 12 with interrupts disabled Fatal trap 12: page fault while in kernel mode fault virtual address = 0xfffc fault code = supervisor read, page not present instruction pointer = 0x8:0xc052cb63 stack pointer = 0x10:0xd5453c08 frame pointer = 0x10:0xd5453c28 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = resume, IOPL = 0 current process = 6 (thread taskq) [thread 100047] Stopped at turnstile_wait+0xa3: movl 0(%edx),%eax db> trace turnstile_wait(0,c1c1c368,fffc,220,c1c1c368) at turnstile_wait+0xa3 _mtx_lock_sleep(c1c1c368,c1a3baf0,0,c06d246a,4f) at _mtx_lock_sleep +0x12c _mtx_lock_flags(c1c1c368,0,c06d246a,4f,1) at _mtx_lock_flags+0xbf _sema_post(c1c1c368,c06c1ac2,18b,c1a29c58) at _sema_post+0x2a ata_completed(c1c1c320,1,c06d524a,bd,c1a29c58) at ata_completed+0x44b taskqueue_run(c1a29c40,c1a29c58,5c,c06cc2f9,0) at taskqueue_run+0xb2 taskqueue_thread_loop(c0733148,d5453d48,c06cfc49,31f,c0733148) at taskqueue_thread_loop+0x3b fork_exit(c052b620,c0733148,d5453d48) at fork_exit+0xc6 fork_trampoline() at fork_trampoline+0x8 --- trap 0x1, eip = 0, esp = 0xd5453d7c, ebp = 0 --- db> show reg cs 0x8 ds 0x10 es 0x10 fs 0x18 ss 0x10 eax 0 ecx 0x1 edx 0xfffc ebx 0xc1c1c368 esp 0xd5453c08 ebp 0xd5453c28 esi 0xc1a3baf0 edi 0 eip 0xc052cb63 turnstile_wait+oxa3 efl 0x10006 dr0 0 dr1 0 dr2 0 dr3 0 dr4 0xffff0ff0 dr5 0x400 dr6 0xffff0ff0 dr7 0x400 turnstile_wait+0xa3: movl 0(%edx),%eax db> call doadump Dumping 511 MB panic: blockable sleep lock (sleep mutex) taskqueue @ /usr/src/sys/kern/subr_taskqueue.c:132 Uptime: 13:50s I reproduced the original panic again, and did this at the prompt: db> cont panic: blockable sleep lock (sleep mutex) process lock @ /usr/src/sys/i386/i386/ trap.c:699 KDB: enter: panic [thread 100047] Stopped at kdb_enter+0x30: leave db> call doadump Dumping 511 MB 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 256 272 288 304 320 336 352 368 384 400 416 432 448 464 480 496 Dump complete 0xf db> reset So, kgdb gives me this: # kgdb kernel.debug vmcore.1 [GDB will not be able to debug user-mode threads: /usr/lib/libthread_db.so: Undefined symbol "p s_pglobal_lookup"] GNU gdb 6.1.1 [FreeBSD] Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-marcel-freebsd". doadump () at pcpu.h:159 (kgdb) bt #0 doadump () at pcpu.h:159 #1 0xc044e695 in db_fncall (dummy1=0, dummy2=0, dummy3=1999, dummy4=0xd5453928 "@ar@") at /usr/src/sys/ddb/db_command.c:531 #2 0xc044e412 in db_command (last_cmdp=0xc07258c4, cmd_table=0x0, aux_cmd_tablep=0xc06f19ec, aux_cmd_tablep_end=0xc06f19f0) at /usr/src/sys/ddb/db_command.c:349 #3 0xc044e51a in db_command_loop () at /usr/src/sys/ddb/db_command.c:455 #4 0xc0450515 in db_trap (type=3, code=0) at /usr/src/sys/ddb/db_main.c:221 #5 0xc0523bf7 in kdb_trap (type=0, code=0, tf=0xd5453a74) at /usr/src/sys/kern/subr_kdb.c:418 #6 0xc0694a8a in trap (frame= {tf_fs = 24, tf_es = 16, tf_ds = 16, tf_edi = 1, tf_esi = -1066575188, tf_ebp = -716883268, tf_isp = -716883296, tf_ebx = -7168832 at /usr/src/sys/i386/i386/trap.c:576 #7 0xc0682c1a in calltrap () at /usr/src/sys/i386/i386/exception.s:140 #8 0x00000018 in ?? () #9 0x00000010 in ?? () #10 0x00000010 in ?? () #11 0x00000001 in ?? () #12 0xc06d5aac in ?? () #13 0xd5453abc in ?? () #14 0xd5453aa0 in ?? () #15 0xd5453af4 in ?? () #16 0x00000001 in ?? () #17 0xc1015000 in ?? () #18 0x00000012 in ?? () #19 0x00000003 in ?? () #20 0x00000000 in ?? () #21 0xc0523900 in kdb_enter (msg=0x0) at cpufunc.h:56 #22 0xc050874c in panic ( fmt=0xc06d5aac "blockable sleep lock (%s) %s @ %s:%d") at /usr/src/sys/kern/kern_shutdown.c:550 #23 0xc052e03e in witness_checkorder (lock=0xc1a3a3f4, flags=9, file=0xc06ec8d0 "/usr/src/sys/i386/i386/trap.c", line=699) at /usr/src/sys/kern/subr_witness.c:714 #24 0xc04fe57a in _mtx_lock_flags (m=0xc1a3a3f4, opts=0, file=0xc06ec8d0 "/usr/src/sys/i386/i386/trap.c", line=699) at /usr/src/sys/kern/kern_mutex.c:271 #25 0xc0694c11 in trap_pfault (frame=0xd5453bc8, usermode=0, eva=65532) at /usr/src/sys/i386/i386/trap.c:699 #26 0xc069490d in trap (frame= {tf_fs = 24, tf_es = 16, tf_ds = 16, tf_edi = 0, tf_esi = -1046234384, tf_ebp = -716882904, tf_isp = -716882956, tf_ebx = -1044264 at /usr/src/sys/i386/i386/trap.c:417 #27 0xc0682c1a in calltrap () at /usr/src/sys/i386/i386/exception.s:140 #28 0x00000018 in ?? () #29 0x00000010 in ?? () #30 0x00000010 in ?? () #31 0x00000000 in ?? () #32 0xc1a3baf0 in ?? () #33 0xd5453c28 in ?? () #34 0xd5453bf4 in ?? () #35 0xc1c1c818 in ?? () #36 0x0000fffc in ?? () #37 0x00000001 in ?? () #38 0x00000000 in ?? () #39 0x0000000c in ?? () #40 0x00000000 in ?? () #41 0xc052cb63 in turnstile_wait (ts=0x0, lock=0xc1c1c818, owner=0xfffc) at /usr/src/sys/kern/subr_turnstile.c:480 #42 0xc04fea8c in _mtx_lock_sleep (m=0xc1c1c818, td=0xc1a3baf0, opts=0, file=0x0, line=0) at /usr/src/sys/kern/kern_mutex.c:560 #43 0xc04fe5af in _mtx_lock_flags (m=0xc1c1c818, opts=0, file=0xc06d246a "/usr/src/sys/kern/kern_sema.c", line=79) at /usr/src/sys/kern/kern_mutex.c:273 #44 0xc05078aa in _sema_post (sema=0xc1c1c818, file=0xc06c1ac2 "/usr/src/sys/dev/ata/ata-queue.c", line=395) at /usr/src/sys/kern/kern_sema.c:79 #45 0xc0454c7b in ata_completed (context=0xc1c1c7d0, dummy=1) at /usr/src/sys/dev/ata/ata-queue.c:395 #46 0xc052b542 in taskqueue_run (queue=0xc1a29c40) at /usr/src/sys/kern/subr_taskqueue.c:191 #47 0xc052b65b in taskqueue_thread_loop (arg=0x0) at /usr/src/sys/kern/subr_taskqueue.c:237 #48 0xc04f0e36 in fork_exit (callout=0xc052b620 , arg=0x0, frame=0x0) at /usr/src/sys/kern/kern_fork.c:807 #49 0xc0682c7c in fork_trampoline () at /usr/src/sys/i386/i386/exception.s:209 -- Joel --=-RpgTlD6jpYIXk2fyXbTf Content-Disposition: attachment; filename=dmesg Content-Type: text/plain; name=dmesg; charset=us-ascii Content-Transfer-Encoding: 7bit Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-STABLE #0: Sat Jan 1 14:36:28 CET 2005 joel@dude.automatvapen.se:/usr/obj/usr/src/sys/WRK WARNING: WITNESS option enabled, expect reduced performance. mptable_probe: MP Config Table has bad signature: \^E\^G ACPI APIC Table: Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) XP 3000+ (2162.75-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0 Features=0x383fbff AMD Features=0xc0400000 real memory = 536805376 (511 MB) avail memory = 515629056 (491 MB) ioapic0 irqs 0-23 on motherboard npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 agp0: mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 pci0: at device 0.1 (no driver attached) pci0: at device 0.2 (no driver attached) pci0: at device 0.3 (no driver attached) pci0: at device 0.4 (no driver attached) pci0: at device 0.5 (no driver attached) isab0: at device 1.0 on pci0 isa0: on isab0 pci0: at device 1.1 (no driver attached) ohci0: mem 0xe8003000-0xe8003fff irq 22 at device 2.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ulpt0: hp deskjet 5550, rev 2.00/1.00, addr 2, iclass 7/1 ulpt0: using bi-directional mode ohci1: mem 0xe8004000-0xe8004fff irq 21 at device 2.1 on pci0 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: on ohci1 usb1: USB revision 1.0 uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 2, iclass 3/1 ums0: 5 buttons and Z dir. pci0: at device 2.2 (no driver attached) pci0: at device 4.0 (no driver attached) pcm0: port 0xb400-0xb47f,0xb000-0xb0ff mem 0xe8001000-0xe8001fff irq 21 at device 6.0 on pci0 pcm0: [GIANT-LOCKED] pcm0: pcib1: at device 8.0 on pci0 pci1: on pcib1 fxp0: port 0x9000-0x903f mem 0xe7000000-0xe701ffff,0xe7020000-0xe7020fff irq 17 at device 9.0 on pci1 miibus0: on fxp0 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:02:b3:d6:fd:4b atapci0: port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 9.0 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pcib2: at device 30.0 on pci0 pci2: on pcib2 pci2: at device 0.0 (no driver attached) pci2: at device 0.1 (no driver attached) sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0: port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: on ppc0 plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] orm0: at iomem 0xd2000-0xd37ff,0xd0000-0xd17ff,0xc0000-0xccfff on isa0 pmtimer0 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2162746483 Hz quality 800 Timecounters tick every 10.000 msec ad0: 76319MB [155061/16/63] at ata0-master UDMA100 ad1: 117246MB [238216/16/63] at ata0-slave UDMA133 acd0: DVDR at ata1-master UDMA33 Mounting root from ufs:/dev/ad0s2a --=-RpgTlD6jpYIXk2fyXbTf-- From owner-freebsd-stable@FreeBSD.ORG Sat Jan 1 22:25:12 2005 Return-Path: Delivered-To: freebsd-stable@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B2A8E16A4CE for ; Sat, 1 Jan 2005 22:25:12 +0000 (GMT) Received: from carver.gumbysoft.com (carver.gumbysoft.com [66.220.23.50]) by mx1.FreeBSD.org (Postfix) with ESMTP id 91EB743D3F for ; Sat, 1 Jan 2005 22:25:12 +0000 (GMT) (envelope-from dwhite@gumbysoft.com) Received: by carver.gumbysoft.com (Postfix, from userid 1000) id 8732F72DD4; Sat, 1 Jan 2005 14:25:12 -0800 (PST) Received: from localhost (localhost [127.0.0.1]) by carver.gumbysoft.com (Postfix) with ESMTP id 81CF872DCB; Sat, 1 Jan 2005 14:25:12 -0800 (PST) Date: Sat, 1 Jan 2005 14:25:12 -0800 (PST) From: Doug White To: Lucas Madar In-Reply-To: <41CA7846.2020604@negaverse.org> Message-ID: <20050101142355.U87126@carver.gumbysoft.com> References: <41CA7846.2020604@negaverse.org> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII cc: freebsd-stable@freebsd.org Subject: Re: panic in 5.3-stable related to heavy usage and libthr X-BeenThere: freebsd-stable@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Production branch of FreeBSD source code List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 01 Jan 2005 22:25:12 -0000 Sorry for the late reply on this, reading back mail from vacation. On Thu, 23 Dec 2004, Lucas Madar wrote: > I updated a machine today to 5.3-STABLE and almost instantly it crashed > when a heavily threaded program ran. (The machine was previously running > 5.2-release). > > This crash is reproducible under heavy load with four threads using > libthr -- I haven't tested any other variances on this scheme, and I > will be testing 5.3-RELEASE tomorrow to see if it exhibits the same > problems. Do you have a test program that exhibits this behavior? Have you tried it with KSE (libpthread)? Were you able to test on -RELEASE? > relevant info from kgdb, with null pointer goodness. Indeed :( > #23 0x00000000 in ?? () > #24 0xc055681f in sleepq_remove_thread (sq=0x0, td=0x0) at > /data/rootsystem/src/sys/kern/subr_sleepqueue.c:581 > #25 0xc0556a16 in sleepq_signal (wchan=0xc2b91320, flags=0, pri=-1) at > /data/rootsystem/src/sys/kern/subr_sleepqueue.c:677 > #26 0xc053fa53 in wakeup_one (ident=0xc2b91320) at > /data/rootsystem/src/sys/kern/kern_synch.c:266 > #27 0xc0543052 in thr_wake (td=0xc2b91000, uap=0xc2b91000) at > /data/rootsystem/src/sys/kern/kern_thr.c:303 > #28 0xc0698c9f in syscall (frame= > {tf_fs = 134742063, tf_es = 134742063, tf_ds = -1078001617, tf_edi > = 134558784, tf_esi = 135229440, tf_ebp = -1079198052, tf_isp = > -378659468, tf_ebx = 671863452, tf_edx = 134558792, tf_ecx = 0, tf_eax = > 443, tf_trapno = 22, tf_err = 2, tf_eip = 672179195, tf_cs = 31, > tf_eflags = 662, tf_esp = -1079198096, tf_ss = 47}) at > /data/rootsystem/src/sys/i386/i386/trap.c:1001 > #29 0xc0686c1f in Xint0x80_syscall () at > /data/rootsystem/src/sys/i386/i386/exception.s:201 > > Is this useful to anyone? I'll keep this around if you need to poke at > any structures. > > - lucas > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" > -- Doug White | FreeBSD: The Power to Serve dwhite@gumbysoft.com | www.FreeBSD.org From owner-freebsd-stable@FreeBSD.ORG Sat Jan 1 22:45:22 2005 Return-Path: Delivered-To: freebsd-stable@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id DA1F616A4CE for ; Sat, 1 Jan 2005 22:45:22 +0000 (GMT) Received: from mail.efacilitas.de (efacilitas.de [213.133.110.227]) by mx1.FreeBSD.org (Postfix) with ESMTP id 57EAD43D1F for ; Sat, 1 Jan 2005 22:45:22 +0000 (GMT) (envelope-from bkoenig@cs.tu-berlin.de) Received: from mail.alpha-tierchen.de (port-212-202-169-228.dynamic.qsc.de [212.202.169.228]) by mail.efacilitas.de (Postfix) with ESMTP id D7EF3123962 for ; Sat, 1 Jan 2005 23:45:11 +0100 (CET) Received: from localhost (localhost.local [127.0.0.1]) by mail.alpha-tierchen.de (Postfix) with ESMTP id A6B11CCE4F8 for ; Sat, 1 Jan 2005 23:45:08 +0100 (CET) Received: from mail.alpha-tierchen.de ([127.0.0.1]) by localhost (mail.efacilitas.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 00536-03 for ; Sat, 1 Jan 2005 23:45:04 +0100 (CET) Received: from alpha (alpha.local [192.168.1.2]) by mail.alpha-tierchen.de (Postfix) with ESMTP id 860B6CCE454 for ; Sat, 1 Jan 2005 22:51:40 +0100 (CET) From: =?utf-8?B?QmrDtnJuIEvDtm5pZw==?= To: Date: Sat, 1 Jan 2005 22:52:47 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable X-Mailer: Microsoft Office Outlook, Build 11.0.6353 Thread-Index: AcTwTDtYE3mpJPenQg27x8vTU3AQCA== X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180 Message-Id: <20050101215140.860B6CCE454@mail.alpha-tierchen.de> X-Virus-Scanned: amavisd-new at alpha-tierchen.de Subject: everything concerning SLIP seems to be out of date X-BeenThere: freebsd-stable@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Production branch of FreeBSD source code List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 01 Jan 2005 22:45:23 -0000 Hello, I wanted to use SLIP to connect two machines with a null-modem cable, = but I realize that all information concerning this topic seems to be out = of date. First of all the device sl0 doesn't exist in 5.3 although there = is a "device sl" in sys/i386/conf/GENERIC for Kernel SLIP. The manpage = of sl contains at least one gross error: the synopsis is obsolete. = slattach(8) refers to uustat(1), but uustat(1) doesn't exist. Chapter = 21.7 of the handbook is absolutly useless in conjunction with = 5.3-RELEASE. Does these things have a background or a specific reason? Is there an = easy alternative? Was SLIP declared as obsolete but someone forgot to = document it? Best regards Bj=C3=B6rn From owner-freebsd-stable@FreeBSD.ORG Sat Jan 1 22:49:17 2005 Return-Path: Delivered-To: freebsd-stable@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A83F916A4CE for ; Sat, 1 Jan 2005 22:49:17 +0000 (GMT) Received: from obsecurity.dyndns.org (CPE0050040655c8-CM00111ae02aac.cpe.net.cable.rogers.com [69.199.47.57]) by mx1.FreeBSD.org (Postfix) with ESMTP id 74E5443D1F for ; Sat, 1 Jan 2005 22:49:17 +0000 (GMT) (envelope-from kris@obsecurity.org) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id C826551432; Sat, 1 Jan 2005 14:49:10 -0800 (PST) Date: Sat, 1 Jan 2005 14:49:10 -0800 From: Kris Kennaway To: "Michael L. Squires" Message-ID: <20050101224910.GC68629@xor.obsecurity.org> References: <6eb82e04122207187e0305c4@mail.gmail.com> <41D67211.1090605@chello.nl> <41D6C7BF.7030405@freebsd.org> <20050101123004.E35628@familysquires.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="HG+GLK89HZ1zG0kk" Content-Disposition: inline In-Reply-To: <20050101123004.E35628@familysquires.net> User-Agent: Mutt/1.4.2.1i cc: freebsd-stable@freebsd.org Subject: Re: LINUX base upgrade and rpm 4.04 port X-BeenThere: freebsd-stable@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Production branch of FreeBSD source code List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 01 Jan 2005 22:49:17 -0000 --HG+GLK89HZ1zG0kk Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Sat, Jan 01, 2005 at 12:35:37PM -0500, Michael L. Squires wrote: > For security reasons the linux-base version has been updated from 7 to 8;= =20 > when I follow the instructions in /usr/ports/UPDATING I get a message fro= m=20 > the linux-8 make process that I should have first installed rpm 4.0.4=20 > (apparently /var/lib/rpm/packages.rpm is in db1 format, and linux-8 wants= =20 > it in db3 format; also, the user "rpm" is apparently missing). >=20 > Should rpm 4.0.4 be installed before updating, or after, or not at all? You should send messages discussing ports to the port maintainer, and to ports@FreeBSD.org. The relevant people may not read this list. Kris --HG+GLK89HZ1zG0kk Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.6 (FreeBSD) iD8DBQFB1yjlWry0BWjoQKURAmTfAKDZsUs7cgZtrqH70T9Oy8ve+kFtoQCfaPGQ gyMyD//XMuX+Oa2c6akr/U8= =2JN4 -----END PGP SIGNATURE----- --HG+GLK89HZ1zG0kk-- From owner-freebsd-stable@FreeBSD.ORG Sat Jan 1 22:52:21 2005 Return-Path: Delivered-To: freebsd-stable@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4B2E916A4CE for ; Sat, 1 Jan 2005 22:52:21 +0000 (GMT) Received: from obsecurity.dyndns.org (CPE0050040655c8-CM00111ae02aac.cpe.net.cable.rogers.com [69.199.47.57]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1594143D39 for ; Sat, 1 Jan 2005 22:52:21 +0000 (GMT) (envelope-from kris@obsecurity.org) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id 4E79D51432; Sat, 1 Jan 2005 14:52:14 -0800 (PST) Date: Sat, 1 Jan 2005 14:52:14 -0800 From: Kris Kennaway To: Bj??rn K??nig Message-ID: <20050101225214.GD68629@xor.obsecurity.org> References: <20050101215140.860B6CCE454@mail.alpha-tierchen.de> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="GpGaEY17fSl8rd50" Content-Disposition: inline In-Reply-To: <20050101215140.860B6CCE454@mail.alpha-tierchen.de> User-Agent: Mutt/1.4.2.1i cc: freebsd-stable@freebsd.org Subject: Re: everything concerning SLIP seems to be out of date X-BeenThere: freebsd-stable@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Production branch of FreeBSD source code List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 01 Jan 2005 22:52:21 -0000 --GpGaEY17fSl8rd50 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Sat, Jan 01, 2005 at 10:52:47PM +0100, Bj??rn K??nig wrote: > I wanted to use SLIP to connect two machines with a null-modem > cable, but I realize that all information concerning this topic > seems to be out of date. First of all the device sl0 doesn't exist > in 5.3 although there is a "device sl" in sys/i386/conf/GENERIC for > Kernel SLIP. As you can probably tell from the comment, that's it. > The manpage of sl contains at least one gross error: > the synopsis is obsolete. slattach(8) refers to uustat(1), but > uustat(1) doesn't exist. Chapter 21.7 of the handbook is absolutly > useless in conjunction with 5.3-RELEASE. UUCP was moved from the base system to the ports tree. > Does these things have a background or a specific reason? Is there > an easy alternative? Was SLIP declared as obsolete but someone > forgot to document it? The SLIP protocol is certainly fading into the mists of history. Please submit a PR with these corrections. Kris --GpGaEY17fSl8rd50 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.6 (FreeBSD) iD8DBQFB1ymeWry0BWjoQKURAnxPAKCGOv2OJmq6iXLuXx+/N7Ne8qwdhACfS5Nb VZ/CCqKXSNkp56MEboaUpEo= =4P9o -----END PGP SIGNATURE----- --GpGaEY17fSl8rd50-- From owner-freebsd-stable@FreeBSD.ORG Sat Jan 1 23:41:31 2005 Return-Path: Delivered-To: freebsd-stable@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 46DFF16A4CE for ; Sat, 1 Jan 2005 23:41:31 +0000 (GMT) Received: from smf-camp13.smf.ebay.com (smfcamppool13.emailebay.com [66.135.215.242]) by mx1.FreeBSD.org (Postfix) with ESMTP id 77F7843D2D for ; Sat, 1 Jan 2005 23:41:25 +0000 (GMT) (envelope-from cmuser@shaggy.smf.ebay.com) Received: from shaggy.smf.ebay.com (fallback-camp.vip.smf.ebay.com [10.108.160.50])j01NfOb9009282 for ; Sat, 1 Jan 2005 15:41:24 -0800 Received: (from cmuser@localhost) by shaggy.smf.ebay.com (8.11.6+Sun/8.11.6) id j01NfOJ02687; Sat, 1 Jan 2005 15:41:24 -0800 (PST) Date: Sat, 1 Jan 2005 15:41:24 -0800 (PST) From: Unexpected reply handler Message-Id: <200501012341.j01NfOJ02687@shaggy.smf.ebay.com> To: stable@freebsd.org References: <200501012341.j01Nf6jx019073@mailhost6.sjc.ebay.com> In-Reply-To: <200501012341.j01Nf6jx019073@mailhost6.sjc.ebay.com> Precedence: junk X-Loop: reply@reply.ebay.com Subject: Re: hi X-BeenThere: freebsd-stable@freebsd.org X-Mailman-Version: 2.1.1 List-Id: Production branch of FreeBSD source code List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 01 Jan 2005 23:41:31 -0000 Thank you for your response. Please don't reply to this message - it is an automated response and your reply will not be received. If you have a question for eBay Customer Support, please visit the following eBay Help page. This page will help you locate the answer to your question, or assist you in contacting us: http://pages.ebay.com/help/index.html If you would like to change your notification preferences, which determine what type of email you receive from eBay, please follow the steps below: 1. Click "My eBay" located at the top of all eBay pages. You may be asked to sign in. 2. Click the "eBay Preferences" link located under the "My Account" heading. 3. Click the "view/change" link to the right of "Notification Preferences." You may be asked to sign in once more. 4. On the "Change Your Notification Preferences" page, check the boxes to indicate the types of messages you'd like to receive from eBay. Then, uncheck the boxes to indicate the types of messages you don't want to receive from us. 5. Once you're done, be sure to click the "Save Changes" button at the top or bottom of the page. Again, thanks for writing eBay. -- From owner-freebsd-stable@FreeBSD.ORG Sat Jan 1 23:48:37 2005 Return-Path: Delivered-To: freebsd-stable@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7779616A4CE for ; Sat, 1 Jan 2005 23:48:37 +0000 (GMT) Received: from smtp.net4b.pt (out.net4b.pt [195.245.176.1]) by mx1.FreeBSD.org (Postfix) with ESMTP id F044943D1F for ; Sat, 1 Jan 2005 23:48:35 +0000 (GMT) (envelope-from mags@oniduo.pt) Received: (qmail 28764 invoked from network); 1 Jan 2005 23:47:49 +0000 Received: from 10001235523.0000017045.acesso.oni.pt (HELO [192.168.1.75]) ([213.58.77.7]) (envelope-sender ) by smtp.net4b.pt (qmail-ldap-1.03) with SMTP for ; 1 Jan 2005 23:47:49 +0000 From: Miguel Saturnino To: freebsd-stable@freebsd.org Content-Type: text/plain; charset=iso8859-1 Date: Sat, 01 Jan 2005 23:48:32 +0000 Message-Id: <1104623312.666.23.camel@localhost> Mime-Version: 1.0 X-Mailer: Evolution 2.0.3 FreeBSD GNOME Team Port Content-Transfer-Encoding: 8bit Subject: Can't access ATAPI CD-RW through SCSI using atapicam X-BeenThere: freebsd-stable@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Production branch of FreeBSD source code List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 01 Jan 2005 23:48:37 -0000 Hi all! I'm trying to access my CD-RW drive trough SCSI (so I can use a graphical interface program to burn CDs) with no luck. I've added "device atapicam" to my kernel configuration and rebuild the kernel (as described in the handbook) but I only managed to get my ZIP drive to get recognized as a SCSI device, the CD-RW still shows up as a IDE device... The relevant part of my kernel configuration file: device ata device atadisk # ATA disk drives #device atapicd # ATAPI CDROM drives options ATA_STATIC_ID # Static device numbering device atapicam device scbus # SCSI bus (required for SCSI) device cd # CD device pass # Passthrough device (direct SCSI ... device da # Direct Access (disks) root@furao # tail /var/run/dmesg.boot ata0-master: DMA limited to UDMA33, non-ATA66 cable or device ata0-slave: DMA limited to UDMA33, non-ATA66 cable or device ad0: 38166MB [77545/16/63] at ata0-master UDMA33 ad1: 19092MB [38792/16/63] at ata0-slave UDMA33 acd0: CDRW at ata1-master PIO4 da0 at umass-sim0 bus 0 target 0 lun 0 da0: Removable Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: 96MB (196608 512 byte sectors: 64H 32S/T 96C) Mounting root from ufs:/dev/ad1s1a root@furao # uname -a FreeBSD furao.diabretes 5.3-STABLE FreeBSD 5.3-STABLE #6: Sat Jan 1 16:49:40 WET 2005 root@furao.diabretes:/usr/obj/usr/src/sys/GENERIC i386 root@furao # atacontrol list ATA channel 0: Master: ad0 ATA/ATAPI revision 6 Slave: ad1 ATA/ATAPI revision 6 ATA channel 1: Master: acd0 ATA/ATAPI revision 5 Slave: no device present root@furao # camcontrol devlist at scbus0 target 0 lun 0 (da0,pass0) root@furao # cdrecord -scanbus Cdrecord-Clone 2.01 (i386-unknown-freebsd5.3) Copyright (C) 1995-2004 Jörg Schilling Using libscg version 'schily-0.8'. scsibus0: 0,0,0 0) 'IOMEGA ' 'ZIP 100 ' '79.E' Removable Disk 0,1,0 1) * 0,2,0 2) * 0,3,0 3) * 0,4,0 4) * 0,5,0 5) * 0,6,0 6) * 0,7,0 7) * Any sugestions? TIA! Miguel