From owner-freebsd-acpi@FreeBSD.ORG Mon Oct 16 11:08:09 2006 Return-Path: X-Original-To: freebsd-acpi@FreeBSD.org Delivered-To: freebsd-acpi@FreeBSD.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D7B2D16A4C2 for ; Mon, 16 Oct 2006 11:08:09 +0000 (UTC) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [216.136.204.21]) by mx1.FreeBSD.org (Postfix) with ESMTP id 877C843D60 for ; Mon, 16 Oct 2006 11:08:09 +0000 (GMT) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (linimon@localhost [127.0.0.1]) by freefall.freebsd.org (8.13.4/8.13.4) with ESMTP id k9GB89Dj028047 for ; Mon, 16 Oct 2006 11:08:09 GMT (envelope-from owner-bugmaster@FreeBSD.org) Received: (from linimon@localhost) by freefall.freebsd.org (8.13.4/8.13.4/Submit) id k9GB88Xk028043 for freebsd-acpi@FreeBSD.org; Mon, 16 Oct 2006 11:08:08 GMT (envelope-from owner-bugmaster@FreeBSD.org) Date: Mon, 16 Oct 2006 11:08:08 GMT Message-Id: <200610161108.k9GB88Xk028043@freefall.freebsd.org> X-Authentication-Warning: freefall.freebsd.org: linimon set sender to owner-bugmaster@FreeBSD.org using -f From: FreeBSD bugmaster To: freebsd-acpi@FreeBSD.org Cc: Subject: Current problem reports assigned to you X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 16 Oct 2006 11:08:10 -0000 Current FreeBSD problem reports Critical problems Serious problems S Tracker Resp. Description -------------------------------------------------------------------------------- o i386/54756 acpi ACPI suspend/resume problem on CF-W2 laptop o i386/55661 acpi ACPI suspend/resume problem on ARMADA M700 o kern/55822 acpi No ACPI power off with SMP kernel o kern/56024 acpi ACPI suspend drains battery while in S3 o i386/64002 acpi acpi problem o i386/67273 acpi [hang] system hangs with acpi and Xfree o i386/72566 acpi ACPI, FreeBSD disables fan on Compaq Armada 1750 o i386/79080 acpi acpi thermal changes freezes HP nx6110 o i386/79081 acpi ACPI suspend/resume not working on HP nx6110 o i386/80426 acpi [APIC] [panic] 5.4-RC3 still panic when boot on ASUS P o i386/87568 acpi [ACPI] [REGRESSION] 6.0-STABLE needs ACPI disabled but 11 problems total. Non-critical problems S Tracker Resp. Description -------------------------------------------------------------------------------- o kern/67309 acpi zzz reboot computer (ACPI S3) o i386/69750 acpi Boot without ACPI failed on ASUS L5 o i386/73822 acpi [request] add thermal support to ACPI o kern/73823 acpi [feature request] acpi / power-on by timer support f kern/74030 acpi Unplugging AC causes battery % to stay locked at 98% f kern/90871 acpi ACPI problems with ASUS A8N-VM-CSM o kern/97383 acpi Volume buttons on IBM Thinkpad crash system with ACPI o kern/98171 acpi [acpi] ACPI 1304 / 0501 errors on Acer 5024WLMi Laptop o kern/103365 acpi [acpi] acpi poweroff doesn't work with geli device att 9 problems total. From owner-freebsd-acpi@FreeBSD.ORG Mon Oct 16 16:50:05 2006 Return-Path: X-Original-To: freebsd-acpi@hub.freebsd.org Delivered-To: freebsd-acpi@hub.freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1328A16A416; Mon, 16 Oct 2006 16:50:04 +0000 (UTC) (envelope-from jhb@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [216.136.204.21]) by mx1.FreeBSD.org (Postfix) with ESMTP id ACE2343D4C; Mon, 16 Oct 2006 16:50:04 +0000 (GMT) (envelope-from jhb@FreeBSD.org) Received: from freefall.freebsd.org (jhb@localhost [127.0.0.1]) by freefall.freebsd.org (8.13.4/8.13.4) with ESMTP id k9GGo4Ys064200; Mon, 16 Oct 2006 16:50:04 GMT (envelope-from jhb@freefall.freebsd.org) Received: (from jhb@localhost) by freefall.freebsd.org (8.13.4/8.13.4/Submit) id k9GGo4TW064196; Mon, 16 Oct 2006 16:50:04 GMT (envelope-from jhb) Date: Mon, 16 Oct 2006 16:50:04 GMT From: John Baldwin Message-Id: <200610161650.k9GGo4TW064196@freefall.freebsd.org> To: g_jin@lbl.gov, jhb@FreeBSD.org, freebsd-acpi@FreeBSD.org Cc: Subject: Re: i386/80426: [APIC] [panic] 5.4-RC3 still panic when boot on ASUS P2B-DS M/B X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 16 Oct 2006 16:50:05 -0000 Synopsis: [APIC] [panic] 5.4-RC3 still panic when boot on ASUS P2B-DS M/B State-Changed-From-To: open->closed State-Changed-By: jhb State-Changed-When: Mon Oct 16 16:49:21 UTC 2006 State-Changed-Why: As noted in the followup, for the few machines that encounter this panic, the procedure is to explicitly disable ACPI like the panic message instructs. http://www.freebsd.org/cgi/query-pr.cgi?pr=80426 From owner-freebsd-acpi@FreeBSD.ORG Mon Oct 16 16:54:58 2006 Return-Path: X-Original-To: freebsd-acpi@hub.freebsd.org Delivered-To: freebsd-acpi@hub.freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 62FC216A40F; Mon, 16 Oct 2006 16:54:58 +0000 (UTC) (envelope-from jhb@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [216.136.204.21]) by mx1.FreeBSD.org (Postfix) with ESMTP id 24E2143D46; Mon, 16 Oct 2006 16:54:58 +0000 (GMT) (envelope-from jhb@FreeBSD.org) Received: from freefall.freebsd.org (jhb@localhost [127.0.0.1]) by freefall.freebsd.org (8.13.4/8.13.4) with ESMTP id k9GGsvwr064829; Mon, 16 Oct 2006 16:54:58 GMT (envelope-from jhb@freefall.freebsd.org) Received: (from jhb@localhost) by freefall.freebsd.org (8.13.4/8.13.4/Submit) id k9GGsvST064825; Mon, 16 Oct 2006 16:54:57 GMT (envelope-from jhb) Date: Mon, 16 Oct 2006 16:54:57 GMT From: John Baldwin Message-Id: <200610161654.k9GGsvST064825@freefall.freebsd.org> To: arne_woerner@yahoo.com, jhb@FreeBSD.org, freebsd-acpi@FreeBSD.org Cc: Subject: Re: i386/73822: [request] add thermal support to ACPI X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 16 Oct 2006 16:54:58 -0000 Synopsis: [request] add thermal support to ACPI State-Changed-From-To: open->closed State-Changed-By: jhb State-Changed-When: Mon Oct 16 16:54:28 UTC 2006 State-Changed-Why: Machine in question doesn't have ACPI thermal zones, so there's nothing an ACPI driver can do. http://www.freebsd.org/cgi/query-pr.cgi?pr=73822 From owner-freebsd-acpi@FreeBSD.ORG Mon Oct 16 17:00:41 2006 Return-Path: X-Original-To: freebsd-acpi@hub.freebsd.org Delivered-To: freebsd-acpi@hub.freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id F085316A407 for ; Mon, 16 Oct 2006 17:00:41 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [216.136.204.21]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6EA3D43D4C for ; Mon, 16 Oct 2006 17:00:41 +0000 (GMT) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (gnats@localhost [127.0.0.1]) by freefall.freebsd.org (8.13.4/8.13.4) with ESMTP id k9GH0fmw065034 for ; Mon, 16 Oct 2006 17:00:41 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.13.4/8.13.4/Submit) id k9GH0fBS065030; Mon, 16 Oct 2006 17:00:41 GMT (envelope-from gnats) Date: Mon, 16 Oct 2006 17:00:41 GMT Message-Id: <200610161700.k9GH0fBS065030@freefall.freebsd.org> To: freebsd-acpi@FreeBSD.org From: John Baldwin Cc: Subject: Re: i386/64002: acpi problem X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: John Baldwin List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 16 Oct 2006 17:00:42 -0000 The following reply was made to PR i386/64002; it has been noted by GNATS. From: John Baldwin To: bug-followup@freebsd.org, burzax@o2.pl Cc: Subject: Re: i386/64002: acpi problem Date: Mon, 16 Oct 2006 12:47:45 -0400 Can you try a more recent version such as 6.1? If so and the problem still persists, we'll need to you to capture a dmesg to figure out exactly what problems you are having. -- John Baldwin From owner-freebsd-acpi@FreeBSD.ORG Mon Oct 16 17:00:45 2006 Return-Path: X-Original-To: freebsd-acpi@hub.freebsd.org Delivered-To: freebsd-acpi@hub.freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B45D816A403 for ; Mon, 16 Oct 2006 17:00:45 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [216.136.204.21]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2F53343D46 for ; Mon, 16 Oct 2006 17:00:45 +0000 (GMT) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (gnats@localhost [127.0.0.1]) by freefall.freebsd.org (8.13.4/8.13.4) with ESMTP id k9GH0jnD065055 for ; Mon, 16 Oct 2006 17:00:45 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.13.4/8.13.4/Submit) id k9GH0iPn065054; Mon, 16 Oct 2006 17:00:45 GMT (envelope-from gnats) Date: Mon, 16 Oct 2006 17:00:45 GMT Message-Id: <200610161700.k9GH0iPn065054@freefall.freebsd.org> To: freebsd-acpi@FreeBSD.org From: John Baldwin Cc: Subject: Re: i386/87568: [ACPI] [REGRESSION] 6.0-STABLE needs ACPI disabled but 5.4-RELEASE didn't X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: John Baldwin List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 16 Oct 2006 17:00:45 -0000 The following reply was made to PR i386/87568; it has been noted by GNATS. From: John Baldwin To: bug-followup@freebsd.org, markhannon@optusnet.com.au Cc: Subject: Re: i386/87568: [ACPI] [REGRESSION] 6.0-STABLE needs ACPI disabled but 5.4-RELEASE didn't Date: Mon, 16 Oct 2006 12:53:01 -0400 We need more details (such as a dmesg from 6.x and a dmesg from 5.4) to investigate further. Also, can you clarify what you mean by "doesn't install?" Does sysinstall not see any hard drives, does it not boot at all, does it boot part way and then hang, etc.? -- John Baldwin From owner-freebsd-acpi@FreeBSD.ORG Mon Oct 16 17:00:50 2006 Return-Path: X-Original-To: freebsd-acpi@hub.freebsd.org Delivered-To: freebsd-acpi@hub.freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 39E3B16A407 for ; Mon, 16 Oct 2006 17:00:50 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [216.136.204.21]) by mx1.FreeBSD.org (Postfix) with ESMTP id A905A43D46 for ; Mon, 16 Oct 2006 17:00:49 +0000 (GMT) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (gnats@localhost [127.0.0.1]) by freefall.freebsd.org (8.13.4/8.13.4) with ESMTP id k9GH0nLE065078 for ; Mon, 16 Oct 2006 17:00:49 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.13.4/8.13.4/Submit) id k9GH0nsF065077; Mon, 16 Oct 2006 17:00:49 GMT (envelope-from gnats) Date: Mon, 16 Oct 2006 17:00:49 GMT Message-Id: <200610161700.k9GH0nsF065077@freefall.freebsd.org> To: freebsd-acpi@FreeBSD.org From: John Baldwin Cc: Subject: Re: kern/103365: [acpi] acpi poweroff doesn't work with geli device attached X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: John Baldwin List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 16 Oct 2006 17:00:50 -0000 The following reply was made to PR kern/103365; it has been noted by GNATS. From: John Baldwin To: bug-followup@freebsd.org, mirya@matrix.ua Cc: Subject: Re: kern/103365: [acpi] acpi poweroff doesn't work with geli device attached Date: Mon, 16 Oct 2006 12:57:11 -0400 This is almost certainly not an ACPI problem but a geli(4) one. Does 'shutdown -r now' also hang? -- John Baldwin From owner-freebsd-acpi@FreeBSD.ORG Tue Oct 17 12:00:45 2006 Return-Path: X-Original-To: freebsd-acpi@hub.freebsd.org Delivered-To: freebsd-acpi@hub.freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id CC6E716A638 for ; Tue, 17 Oct 2006 12:00:45 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [216.136.204.21]) by mx1.FreeBSD.org (Postfix) with ESMTP id 37CB043D49 for ; Tue, 17 Oct 2006 12:00:45 +0000 (GMT) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (gnats@localhost [127.0.0.1]) by freefall.freebsd.org (8.13.4/8.13.4) with ESMTP id k9HC0icN066700 for ; Tue, 17 Oct 2006 12:00:44 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.13.4/8.13.4/Submit) id k9HC0io5066699; Tue, 17 Oct 2006 12:00:44 GMT (envelope-from gnats) Date: Tue, 17 Oct 2006 12:00:44 GMT Message-Id: <200610171200.k9HC0io5066699@freefall.freebsd.org> To: freebsd-acpi@FreeBSD.org From: Mark Hannon Cc: Subject: Re: i386/87568: [ACPI] [REGRESSION] 6.0-STABLE needs ACPI disabled but 5.4-RELEASE didn't X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Mark Hannon List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 17 Oct 2006 12:00:45 -0000 The following reply was made to PR i386/87568; it has been noted by GNATS. From: Mark Hannon To: John Baldwin Cc: bug-followup@freebsd.org Subject: Re: i386/87568: [ACPI] [REGRESSION] 6.0-STABLE needs ACPI disabled but 5.4-RELEASE didn't Date: Tue, 17 Oct 2006 21:53:15 +1000 --=-kjQan7f3I+EpOgqPiEYy Content-Type: text/plain Content-Transfer-Encoding: 7bit I'm sorry I no longer have FreeBSD installed on this machine. The symptoms were a hang part way through the install (sysinstall would see the drives etc). If I installed with ACPI off and then booted the installed OS with it on again then I would get a hard hang within a minute. Disabling ACPI helped, disabling the APIC also helped. Regards/Mark On Mon, 2006-10-16 at 12:53 -0400, John Baldwin wrote: > We need more details (such as a dmesg from 6.x and a dmesg from 5.4) to > investigate further. Also, can you clarify what you mean by "doesn't > install?" Does sysinstall not see any hard drives, does it not boot at all, > does it boot part way and then hang, etc.? > --=-kjQan7f3I+EpOgqPiEYy Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 7bit I'm sorry I no longer have FreeBSD installed on this machine.  The symptoms were a hang part way through the install (sysinstall would see the drives etc).  If I installed with ACPI off and then booted the installed OS with it on again then I would get a hard hang within a minute.  Disabling ACPI helped, disabling the APIC also helped.

Regards/Mark


On Mon, 2006-10-16 at 12:53 -0400, John Baldwin wrote: 
 We need more details (such as a dmesg from 6.x and a dmesg from 5.4) to 
 investigate further.  Also, can you clarify what you mean by "doesn't 
 install?"  Does sysinstall not see any hard drives, does it not boot at all, 
 does it boot part way and then hang, etc.?
--=-kjQan7f3I+EpOgqPiEYy-- From owner-freebsd-acpi@FreeBSD.ORG Tue Oct 17 16:19:45 2006 Return-Path: X-Original-To: freebsd-acpi@hub.freebsd.org Delivered-To: freebsd-acpi@hub.freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9FC9016A40F; Tue, 17 Oct 2006 16:19:45 +0000 (UTC) (envelope-from jhb@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [216.136.204.21]) by mx1.FreeBSD.org (Postfix) with ESMTP id 56F4243D4C; Tue, 17 Oct 2006 16:19:44 +0000 (GMT) (envelope-from jhb@FreeBSD.org) Received: from freefall.freebsd.org (jhb@localhost [127.0.0.1]) by freefall.freebsd.org (8.13.4/8.13.4) with ESMTP id k9HGJi1c089572; Tue, 17 Oct 2006 16:19:44 GMT (envelope-from jhb@freefall.freebsd.org) Received: (from jhb@localhost) by freefall.freebsd.org (8.13.4/8.13.4/Submit) id k9HGJibo089568; Tue, 17 Oct 2006 16:19:44 GMT (envelope-from jhb) Date: Tue, 17 Oct 2006 16:19:44 GMT From: John Baldwin Message-Id: <200610171619.k9HGJibo089568@freefall.freebsd.org> To: markhannon@optusnet.com.au, jhb@FreeBSD.org, freebsd-acpi@FreeBSD.org Cc: Subject: Re: i386/87568: [ACPI] [REGRESSION] 6.0-STABLE needs ACPI disabled but 5.4-RELEASE didn't X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 17 Oct 2006 16:19:45 -0000 Synopsis: [ACPI] [REGRESSION] 6.0-STABLE needs ACPI disabled but 5.4-RELEASE didn't State-Changed-From-To: open->closed State-Changed-By: jhb State-Changed-When: Tue Oct 17 16:19:16 UTC 2006 State-Changed-Why: No longer able to test the box. http://www.freebsd.org/cgi/query-pr.cgi?pr=87568 From owner-freebsd-acpi@FreeBSD.ORG Fri Oct 20 12:36:37 2006 Return-Path: X-Original-To: acpi@FreeBSD.org Delivered-To: freebsd-acpi@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 3DB6116A40F for ; Fri, 20 Oct 2006 12:36:37 +0000 (UTC) (envelope-from joel@FreeBSD.org) Received: from av8-2-sn3.vrr.skanova.net (av8-2-sn3.vrr.skanova.net [81.228.9.184]) by mx1.FreeBSD.org (Postfix) with ESMTP id 09F1943D4C for ; Fri, 20 Oct 2006 12:36:36 +0000 (GMT) (envelope-from joel@FreeBSD.org) Received: by av8-2-sn3.vrr.skanova.net (Postfix, from userid 502) id DED63386F9; Fri, 20 Oct 2006 14:36:34 +0200 (CEST) Received: from smtp3-2-sn3.vrr.skanova.net (smtp3-2-sn3.vrr.skanova.net [81.228.9.102]) by av8-2-sn3.vrr.skanova.net (Postfix) with ESMTP id BF83937E7B for ; Fri, 20 Oct 2006 14:36:34 +0200 (CEST) Received: from dude.automatvapen.se (81-229-112-193-no21.tbcn.telia.com [81.229.112.193]) by smtp3-2-sn3.vrr.skanova.net (Postfix) with ESMTP id 28BA237E4D for ; Fri, 20 Oct 2006 14:36:33 +0200 (CEST) From: Joel Dahl To: acpi@FreeBSD.org Content-Type: multipart/mixed; boundary="=-STXYCKdOyAjC0TaJ1LZW" Date: Fri, 20 Oct 2006 14:36:35 +0200 Message-Id: <1161347795.671.14.camel@localhost> Mime-Version: 1.0 X-Mailer: Evolution 2.6.1 FreeBSD GNOME Team Port Cc: Subject: HP NX7400 - ACPI problems X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 20 Oct 2006 12:36:37 -0000 --=-STXYCKdOyAjC0TaJ1LZW Content-Type: text/plain Content-Transfer-Encoding: 7bit A few notes on running the latest CURRENT (plain GENERIC) on a HP NX7400 laptop, maybe someone can help me solve these problems: # 1 The following (somewhat annoying) message is repeated on the console all the time: acpi_tz0: _CRT value is absurd, ignored (256.0C) # 2 Sometimes, perhaps one out of ten, the battery isn't detected, so "acpiconf -i batt" gives me: Design capacity: 0 mWh Last full capacity: 0 mWh Technology: primary (non-rechargable) Design voltage: 0 mWh Capacity (warn): 0 mWh Capacity (low): 0 mWh Low/warn granularity: 0 mWh Warn/full granularity: 0 mWh Model number: Serial number: Type: OEM info: State: not present It should look like this (which it also usually does): Design capacity: 3915 mAh Last full capacity: 3915 mAh Technology: secondary (rechargable) Design voltage: 10800 mV Capacity (warn): 196 mAh Capacity (low): 40 mAh Low/warn granularity: 100 mAh Warn/full granularity: 100 mAh Model number: Primary Serial number: 02710 2006/05/10 Type: LIon OEM info: Hewlett-Packard State: high Remaining capacity 100% Remaining time unknown Present rate 0 mA Voltage 16626 mV # 3 Battery time in FreeBSD is bad compared to Windows. I can usually run this laptop on battery for 3,5 hours while in Windows, but the battery only lasts for 2 hours in FreeBSD. Can this be tweaked somehow? # 4 I've seen an ACPI-related panic (reported on current@) during boot. Only happened twice so far though. For reference: http://people.freebsd.org/~joel/panics/panic001.jpg I've also attached a verbose dmesg in case someone wants it. -- Joel --=-STXYCKdOyAjC0TaJ1LZW Content-Disposition: attachment; filename=dmesg.txt Content-Type: text/plain; name=dmesg.txt; charset=us-ascii Content-Transfer-Encoding: 7bit Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-CURRENT #0: Fri Oct 20 09:45:22 CEST 2006 joel@jesus.automatvapen.se:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Using 64 colors for the VM-PQ tuning (2048, 8) Preloaded elf kernel "/boot/kernel/kernel" at 0xc0c44000. Preloaded elf module "/boot/kernel/snd_hda.ko" at 0xc0c441ec. Preloaded elf module "/boot/kernel/sound.ko" at 0xc0c44298. Preloaded elf module "/boot/kernel/atapicam.ko" at 0xc0c44344. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0c443f4. Table 'FACP' at 0x1f7e5600 Table 'APIC' at 0x1f7e56c0 MADT: Found table at 0x1f7e56c0 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 2: enabled SMP: Added CPU 1 (AP) INTR: Adding local APIC 0 as a target ACPI APIC Table: Calibrating clock(s) ... i8254 clock: 1193178 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1662513730 Hz CPU: Genuine Intel(R) CPU T2300 @ 1.66GHz (1662.51-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6e8 Stepping = 8 Features=0xbfe9fbff Features2=0xc189> AMD Features=0x100000 Cores per package: 2 Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries Data TLB: 4 KB Pages, 4-way set associative, 128 entries Instruction TLB: 4 MB pages, fully associative, 2 entries 2nd-level cache: 2-MB, 8-way set associative, 64-byte line size 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size Data TLB: 4 MB Pages, 4-way set associative, 8 entries 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size L2 cache: 2048 kbytes, 8-way associative, 64 bytes/line real memory = 528285696 (503 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001028000 - 0x000000001eeb0fff, 501780480 bytes (122505 pages) avail memory = 503099392 (479 MB) INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00fa000 bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x322 pnpbios: Found PnP BIOS data at 0xc00f59a0 pnpbios: Entry = f0000:59ce Rev = 1.0 pnpbios: Event flag at f59c6 pnpbios: OEM ID a2303c10 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 1 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: intpin 0 -> ExtINT (edge, high) ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) ioapic0: intpin 16 -> PCI IRQ 16 (level, low) ioapic0: intpin 17 -> PCI IRQ 17 (level, low) ioapic0: intpin 18 -> PCI IRQ 18 (level, low) ioapic0: intpin 19 -> PCI IRQ 19 (level, low) ioapic0: intpin 20 -> PCI IRQ 20 (level, low) ioapic0: intpin 21 -> PCI IRQ 21 (level, low) ioapic0: intpin 22 -> PCI IRQ 22 (level, low) ioapic0: intpin 23 -> PCI IRQ 23 (level, low) MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: high MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: high lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00000200 err: 0x00010000 pcm: 0x00010000 wlan: <802.11 Link Layer> ath_rate: version 1.2 random: nfslock: pseudo-device io: kbd: new array size 4 kbd1 at kbdmux0 mem: Pentium Pro MTRR support enabled null: ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) rr232x: RocketRAID 232x controller driver v1.02 (Oct 20 2006 09:45:05) npx0: INT 16 interface acpi0: on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x8000fa20 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=27a08086) pcibios: BIOS version 2.10 acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 2 dev 6 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: Power Button (fixed) acpi0: wakeup code va 0xcc8a5000 pa 0x9d000 ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_ec0: port 0x62,0x66 on acpi0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 10 11 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 10 11 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 10 11 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 10 11 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 10 11 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 10 11 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 10 11 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 10 11 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 10 11 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 10 11 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 10 11 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 10 11 pci_link4: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 10 11 pci_link4: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 10 11 pci_link4: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 10 11 pci_link5: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 10 11 pci_link5: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 10 11 pci_link5: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 10 11 pci_link6: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 10 11 pci_link6: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 10 11 pci_link6: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 10 11 pci_link7: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 none pci_link7: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 none pci_link7: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 none cpu0: on acpi0 acpi_throttle0: on cpu0 acpi_throttle0: P_CNT from P_BLK 0x1010 cpu1: on acpi0 acpi_throttle1: on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x27a0, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27a2, revid=0x03 bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type 1, range 32, base f4400000, size 19, enabled map[14]: type 4, range 32, base 00004000, size 3, enabled map[18]: type 3, range 32, base e0000000, size 28, enabled map[1c]: type 1, range 32, base f4480000, size 18, enabled pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x27a6, revid=0x03 bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base f4500000, size 19, enabled found-> vendor=0x8086, dev=0x27d8, revid=0x01 bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 64, base f4580000, size 14, enabled pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x27d0, revid=0x01 bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x27d2, revid=0x01 bus=0, slot=28, func=1 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 pcib0: matched entry for 0.28.INTB pcib0: slot 28 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x27d6, revid=0x01 bus=0, slot=28, func=3 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=d, irq=10 pcib0: matched entry for 0.28.INTD pcib0: slot 28 INTD hardwired to IRQ 19 found-> vendor=0x8086, dev=0x27c8, revid=0x01 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type 4, range 32, base 00004020, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x27c9, revid=0x01 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type 4, range 32, base 00004040, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x27ca, revid=0x01 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[20]: type 4, range 32, base 00004060, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x27cb, revid=0x01 bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=10 map[20]: type 4, range 32, base 00004080, size 5, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 19 found-> vendor=0x8086, dev=0x27cc, revid=0x01 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base f4584000, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x2448, revid=0xe1 bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27b9, revid=0x01 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27df, revid=0x01 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type 4, range 32, base 000040a0, size 4, enabled pcib0: matched entry for 0.31.INTA pcib0: slot 31 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x27c5, revid=0x01 bus=0, slot=31, func=2 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type 4, range 32, base 000013f0, size 3, enabled map[14]: type 4, range 32, base 000015f4, size 2, enabled map[18]: type 4, range 32, base 00001370, size 3, enabled map[1c]: type 4, range 32, base 00001574, size 2, enabled map[20]: type 4, range 32, base 000040d0, size 4, enabled map[24]: type 1, range 32, base f4585000, size 10, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 17 vgapci0: port 0x4000-0x4007 mem 0xf4400000-0xf447ffff,0xe0000000-0xefffffff,0xf4480000-0xf44bffff irq 16 at device 2.0 on pci0 agp0: on vgapci0 vgapci0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xf4400000 vgapci0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xf4400000 vgapci0: Reserved 0x40000 bytes for rid 0x1c type 3 at 0xf4480000 vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xe0000000 agp0: detected 7932k stolen memory agp0: aperture size is 256M vgapci1: mem 0xf4500000-0xf457ffff at device 2.1 on pci0 pcm0: mem 0xf4580000-0xf4583fff irq 16 at device 27.0 on pci0 pcm0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xf4580000 ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49 pcm0: [MPSAFE] pcib1: irq 16 at device 28.0 on pci0 pcib1: secondary bus 8 pcib1: subordinate bus 8 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xfff00000-0xfffff pcib1: prefetched decode 0xfff00000-0xfffff pci8: on pcib1 pci8: physical bus=8 pcib2: irq 17 at device 28.1 on pci0 pcib2: secondary bus 16 pcib2: subordinate bus 16 pcib2: I/O decode 0xf000-0xfff pcib2: memory decode 0xf4000000-0xf40fffff pcib2: prefetched decode 0xfff00000-0xfffff pci16: on pcib2 pci16: physical bus=16 found-> vendor=0x8086, dev=0x4222, revid=0x02 bus=16, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 32, base f4000000, size 12, enabled pcib2: (null) requested memory range 0xf4000000-0xf4000fff: good pcib2: matched entry for 16.0.INTA pcib2: slot 0 INTA hardwired to IRQ 17 pci16: at device 0.0 (no driver attached) pcib3: irq 19 at device 28.3 on pci0 pcib3: secondary bus 32 pcib3: subordinate bus 32 pcib3: I/O decode 0x2000-0x3fff pcib3: memory decode 0xf0000000-0xf3ffffff pcib3: prefetched decode 0xfff00000-0xfffff pci32: on pcib3 pci32: physical bus=32 uhci0: port 0x4020-0x403f irq 20 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4020 ioapic0: routing intpin 20 (PCI IRQ 20) to vector 50 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x4040-0x405f irq 17 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4040 ioapic0: routing intpin 17 (PCI IRQ 17) to vector 51 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0x4060-0x407f irq 18 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4060 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 52 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: on usb2 uhub2: 2 ports with 2 removable, self powered uhci3: port 0x4080-0x409f irq 19 at device 29.3 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4080 ioapic0: routing intpin 19 (PCI IRQ 19) to vector 53 uhci3: [GIANT-LOCKED] usb3: on uhci3 usb3: USB revision 1.0 uhub3: on usb3 uhub3: 2 ports with 2 removable, self powered ehci0: mem 0xf4584000-0xf45843ff irq 20 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf4584000 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: on ehci0 usb4: USB revision 2.0 uhub4: on usb4 uhub4: 8 ports with 8 removable, self powered pcib4: at device 30.0 on pci0 pcib4: secondary bus 2 pcib4: subordinate bus 3 pcib4: I/O decode 0xf000-0xfff pcib4: memory decode 0xf4100000-0xf43fffff pcib4: prefetched decode 0xfff00000-0xfffff pcib4: Subtractively decoded bridge. pci2: on pcib4 pci2: physical bus=2 found-> vendor=0x104c, dev=0x8039, revid=0x00 bus=2, slot=6, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0xc4 (49000 ns), maxlat=0x03 (750 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base f4100000, size 12, enabled pcib4: (null) requested memory range 0xf4100000-0xf4100fff: good pcib4: matched entry for 2.6.INTA pcib4: slot 6 INTA hardwired to IRQ 18 found-> vendor=0x104c, dev=0x803a, revid=0x00 bus=2, slot=6, func=1 class=0c-00-10, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=b, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base f4101000, size 11, enabled pcib4: (null) requested memory range 0xf4101000-0xf41017ff: good map[14]: type 1, range 32, base f4104000, size 14, enabled pcib4: (null) requested memory range 0xf4104000-0xf4107fff: good pcib4: matched entry for 2.6.INTB pcib4: slot 6 INTB hardwired to IRQ 19 found-> vendor=0x14e4, dev=0x170c, revid=0x02 bus=2, slot=14, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base f4108000, size 13, enabled pcib4: (null) requested memory range 0xf4108000-0xf4109fff: good pcib4: matched entry for 2.14.INTA pcib4: slot 14 INTA hardwired to IRQ 16 cbb0: mem 0xf4100000-0xf4100fff irq 18 at device 6.0 on pci2 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf4100000 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0x8039104c 0x02100007 0x06070000 0x00824010 0x10: 0xf4100000 0x020000a0 0x20030302 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07440112 0x40: 0x30a2103c 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x08441060 0x01a30019 0x00170000 0x01011b22 0x90: 0x406402c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0xb7512925 0x0e019467 0x00000000 0x00000000 fwohci0: vendor=104c, dev=803a fwohci0: vendor=104c, dev=803a fwohci0: <1394 Open Host Controller Interface> mem 0xf4101000-0xf41017ff,0xf4104000-0xf4107fff irq 19 at device 6.1 on pci2 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xf4101000 fwohci0: [MPSAFE] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:02:3f:99:29:c1:29:0c fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:02:3f:c1:29:0c fwe0: bpf attached fwe0: Ethernet address: 02:02:3f:c1:29:0c fwe0: if_start running deferred for Giant sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) bfe0: mem 0xf4108000-0xf4109fff irq 16 at device 14.0 on pci2 bfe0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xf4108000 miibus0: on bfe0 bmtphy0: on miibus0 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bfe0: bpf attached bfe0: Ethernet address: 00:15:60:c3:2d:2a bfe0: [MPSAFE] isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40a0-0x40af irq 16 at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x40a0 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=00 stat1=00 devices=0x4 ioapic0: routing intpin 14 (ISA IRQ 14) to vector 54 ata0: [MPSAFE] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ioapic0: routing intpin 15 (ISA IRQ 15) to vector 55 ata1: [MPSAFE] atapci1: port 0x13f0-0x13f7,0x15f4-0x15f7,0x1370-0x1377,0x1574-0x1577,0x40d0-0x40df mem 0xf4585000-0xf45853ff irq 17 at device 31.2 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x40d0 atapci1: [MPSAFE] atapci1: Reserved 0x400 bytes for rid 0x24 type 3 at 0xf4585000 atapci1: AHCI Version 01.10 controller with 4 ports detected ata2: on atapci1 ata2: SATA connect ready time=0ms ata2: sata_connect devices=0x1 ata2: [MPSAFE] ata3: on atapci1 ata3: SATA connect status=00000000 ata3: [MPSAFE] ata4: on atapci1 ata4: SATA connect status=00000000 ata4: [MPSAFE] ata5: on atapci1 ata5: SATA connect status=00000000 ata5: [MPSAFE] battery0: on acpi0 battery1: on acpi0 acpi_acad0: on acpi0 acpi_button0: on acpi0 acpi_lid0: on acpi0 acpi_tz0: on acpi0 acpi_tz0: _CRT value is absurd, ignored (256.0C) acpi_tz1: on acpi0 acpi_tz2: on acpi0 acpi_tz3: on acpi0 acpi_tz4: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: irq 12 on acpi0 psm0: current command byte:0065 psm0: irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to vector 57 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: on ppc0 plip0: on ppbus0 plip0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 ioapic0: routing intpin 7 (ISA IRQ 7) to vector 58 ppc0: [GIANT-LOCKED] sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0x4e81 0x4e81 0x4e81 0x4e81 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0x4e81 0x4e81 0x4e81 0x4e81 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding ioapic0: routing intpin 4 (ISA IRQ 4) to vector 59 sio0: [FAST] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x4e81 0x4e81 0x4e81 0x4e81 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered lapic: Divisor 2, Frequency 83125691 hz Timecounter "TSC" frequency 1662513730 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached rr232x: no controller detected. acpi_tz0: _AC3: temperature 60.0 >= setpoint 50.0 acpi_tz0: _AC2: temperature 60.0 >= setpoint 60.0 acpi_tz0: switched from NONE to _AC2: 60.0C battery0: battery initialization start battery1: battery initialization start ata0-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire acd0: setting PIO4 on ICH7 chip acd0: DVDR drive at ata0 as master acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc acpi_tz0: _AC3: temperature 60.0 >= setpoint 50.0 acpi_tz0: _CRT value is absurd, ignored (256.0C) acpi_tz0: _AC3: temperature 60.0 >= setpoint 45.0 ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times acpi_tz0: _AC3: temperature 60.0 >= setpoint 45.0 ad4: 76319MB at ata2-master SATA150 ad4: 156301488 sectors [165398C/15H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad4 battery0: battery initialization done, tried 1 times ad4: Intel check1 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed pcm0: HDA_DEBUG: HDA Config: on=0x00000000 off=0x00000000 pcm0: HDA_DEBUG: Starting CORB Engine... pcm0: HDA_DEBUG: Starting RIRB Engine... pcm0: HDA_DEBUG: Enabling controller interrupt... pcm0: HDA_DEBUG: Scanning HDA codecs... pcm0: HDA_DEBUG: Probing codec: 0 pcm0: HDA_DEBUG: startnode=1 endnode=2 pcm0: HDA_DEBUG: Found AFG nid=1 [startnode=1 endnode=2] pcm0: HDA_DEBUG: Parsing AFG nid=1 cad=0 pcm0: Vendor: 0x000011d4 pcm0: Device: 0x00001981 pcm0: Revision: 0x00000002 pcm0: Stepping: 0x00000000 pcm0: PCI Subvendor: 0x30a2103c pcm0: Nodes: start=2 endnode=32 total=30 pcm0: HDA_DEBUG: Parsing Ctls... pcm0: HDA_DEBUG: Parsing vendor patch... pcm0: HDA_DEBUG: Building AFG tree... pcm0: HDA_DEBUG: HWiP: HDA Widget Parser - Revision 1 pcm0: HDA_DEBUG: HWiP: Found 2 DAC path using HDA_PARSE_MIXER strategy. pcm0: HDA_DEBUG: AFG commit... pcm0: HDA_DEBUG: Ctls commit... pcm0: [ 1] Ctl nid=5 Bind to NONE pcm0: [ 2] Ctl nid=5 Bind to NONE pcm0: [ 3] Ctl nid=6 Bind to NONE pcm0: [ 4] Ctl nid=7 DISABLED pcm0: [ 5] Ctl nid=8 Bind to NONE pcm0: [ 6] Ctl nid=9 Bind to NONE pcm0: [ 7] Ctl nid=9 Bind to NONE pcm0: [13] Ctl nid=24 Bind to NONE pcm0: [14] Ctl nid=24 Bind to NONE pcm0: [15] Ctl nid=26 Bind to NONE pcm0: [16] Ctl nid=27 Bind to NONE pcm0: [18] Ctl nid=29 Bind to NONE pcm0: [19] Ctl nid=30 Bind to NONE pcm0: [20] Ctl nid=31 Bind to NONE pcm0: HDA_DEBUG: PCMDIR_PLAY setup... pcm0: HDA_DEBUG: PCMDIR_REC setup... pcm0: HDA_DEBUG: OSS mixer initialization... pcm0: HDA_DEBUG: Pin sense: nid=6 res=0x0000ffe4 pcm0: HDA_DEBUG: Enabling headphone/speaker audio routing switching: pcm0: HDA_DEBUG: index=1 nid=6 pci_subvendor=0x30a2103c codec=0x11d41981 pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "rec": pcm0: Mixer "ogain": pcm0: HDA_DEBUG: Registering PCM channels... pcm0: sndbuf_setmap 1e8c9000, 4000; 0xd4a95000 -> 1e8c9000 pcm0: sndbuf_setmap 1e8af000, 4000; 0xd4a99000 -> 1e8af000 pcm0: pcm0: pcm0: pcm0: pcm0: HDA config/quirks: fixedrate forcestereo pcm0: pcm0: +-------------------+ pcm0: | DUMPING HDA NODES | pcm0: +-------------------+ pcm0: pcm0: Default Parameter pcm0: ----------------- pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x000e007f pcm0: PCM size: 16 20 24 pcm0: PCM rate: 44 48 88 96 176 192 pcm0: IN amp: 0x00270300 pcm0: OUT amp: 0x80053f3d pcm0: pcm0: nid: 2 [DIGITAL] [DISABLED] pcm0: name: audio output pcm0: widget_cap: 0x00030311 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Stream cap: 0x00000005 pcm0: Format: AC3 PCM pcm0: PCM cap: 0x00020060 pcm0: PCM size: 16 pcm0: PCM rate: 44 48 pcm0: connections: 2 pcm0: | pcm0: + <- nid=1 [GHOST!] [UNKNOWN] pcm0: | pcm0: + <- nid=4 [audio input] pcm0: pcm0: nid: 3 [ANALOG] pcm0: name: audio output pcm0: widget_cap: 0x00000441 pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000011 pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x000e007f pcm0: PCM size: 16 20 24 pcm0: PCM rate: 44 48 88 96 176 192 pcm0: connections: 0 pcm0: pcm0: nid: 4 [ANALOG] pcm0: name: audio input pcm0: widget_cap: 0x00100511 pcm0: Parse flags: 0x00000002 pcm0: Ctl flags: 0x00000800 pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x0006007f pcm0: PCM size: 16 20 pcm0: PCM rate: 44 48 88 96 176 192 pcm0: connections: 1 pcm0: | pcm0: + <- nid=21 [audio selector] pcm0: pcm0: nid: 5 [ANALOG] pcm0: name: pin: line out (jack) pcm0: widget_cap: 0x00400187 pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x0001173f pcm0: ISC TRQD HP OUT IN EAPD : UNSOL pcm0: Pin config: 0x01014010 pcm0: Pin control: 0x00000040 OUT pcm0: EAPD: 0x00000002 pcm0: Output amp: 0x80053f3d pcm0: mute=1 step=63 size=5 offset=61 pcm0: Input amp: 0x00270300 pcm0: mute=0 step=3 size=39 offset=0 pcm0: connections: 2 pcm0: | pcm0: + <- nid=3 [audio output] pcm0: | pcm0: + <- nid=14 [audio mixer] (selected) pcm0: pcm0: nid: 6 [ANALOG] pcm0: name: pin: headphones out (jack) pcm0: widget_cap: 0x00400185 pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x0000001f pcm0: ISC TRQD HP OUT : UNSOL pcm0: Pin config: 0x0221401f pcm0: Pin control: 0x000000c0 HP OUT pcm0: Output amp: 0x80053f3d pcm0: mute=1 step=63 size=5 offset=61 pcm0: connections: 2 pcm0: | pcm0: + <- nid=3 [audio output] pcm0: | pcm0: + <- nid=14 [audio mixer] (selected) pcm0: pcm0: nid: 7 [ANALOG] [DISABLED] pcm0: name: pin: line out (none) pcm0: widget_cap: 0x00400104 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x00000010 pcm0: OUT pcm0: Pin config: 0x50070030 pcm0: Pin control: 0x00000040 OUT pcm0: Output amp: 0x80053f3d pcm0: mute=1 step=63 size=5 offset=61 pcm0: connections: 1 pcm0: | pcm0: + <- nid=15 [audio mixer] pcm0: pcm0: nid: 8 [ANALOG] pcm0: name: pin: Mic in (jack) pcm0: widget_cap: 0x00400083 pcm0: Parse flags: 0x00000002 pcm0: Ctl flags: 0x00000081 pcm0: Pin cap: 0x00001727 pcm0: ISC TRQD IN : UNSOL pcm0: Pin config: 0x02a19040 pcm0: Pin control: 0x00000020 IN pcm0: Input amp: 0x00270300 pcm0: mute=0 step=3 size=39 offset=0 pcm0: connections: 0 pcm0: pcm0: nid: 9 [ANALOG] pcm0: name: pin: line in (jack) pcm0: widget_cap: 0x00400187 pcm0: Parse flags: 0x00000002 pcm0: Ctl flags: 0x00000041 pcm0: Pin cap: 0x00001737 pcm0: ISC TRQD OUT IN : UNSOL pcm0: Pin config: 0x01813041 pcm0: Pin control: 0x00000020 IN pcm0: Output amp: 0x80053f3d pcm0: mute=1 step=63 size=5 offset=61 pcm0: Input amp: 0x00270300 pcm0: mute=0 step=3 size=39 offset=0 pcm0: connections: 2 pcm0: | pcm0: + <- nid=3 [audio output] (selected) pcm0: | pcm0: + <- nid=14 [audio mixer] pcm0: pcm0: nid: 10 [DIGITAL] [DISABLED] pcm0: name: pin: SPDIF out (none) pcm0: widget_cap: 0x00400301 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x00000010 pcm0: OUT pcm0: Pin config: 0x41450020 pcm0: Pin control: 0x00000040 OUT pcm0: connections: 1 pcm0: | pcm0: + <- nid=2 [audio output] [DISABLED] pcm0: pcm0: nid: 11 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x00300101 pcm0: Parse flags: 0x00000002 pcm0: Ctl flags: 0x00000000 pcm0: connections: 6 pcm0: | pcm0: + <- nid=3 [audio output] pcm0: | pcm0: + <- nid=12 [audio mixer] pcm0: | pcm0: + <- nid=9 [pin: line in (jack)] pcm0: | pcm0: + <- nid=14 [audio mixer] (selected) pcm0: | pcm0: + <- nid=5 [pin: line out (jack)] pcm0: | pcm0: + <- nid=24 [pin: Mic in (jack)] pcm0: pcm0: nid: 12 [ANALOG] pcm0: name: audio mixer pcm0: widget_cap: 0x00200101 pcm0: Parse flags: 0x00000002 pcm0: Ctl flags: 0x00000000 pcm0: connections: 2 pcm0: | pcm0: + <- nid=30 [audio selector] pcm0: | pcm0: + <- nid=31 [audio selector] pcm0: pcm0: nid: 13 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x0030010c pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000021 pcm0: Output amp: 0x800b0f0f pcm0: mute=1 step=15 size=11 offset=15 pcm0: connections: 2 pcm0: | pcm0: + <- nid=16 [beep widget] (selected) pcm0: | pcm0: + <- nid=22 [pin: other (fixed)] pcm0: pcm0: nid: 14 [ANALOG] pcm0: name: audio mixer pcm0: widget_cap: 0x00200101 pcm0: Parse flags: 0x00000003 pcm0: Ctl flags: 0x000000f1 pcm0: connections: 8 pcm0: | pcm0: + <- nid=13 [audio selector] pcm0: | pcm0: + <- nid=17 [audio selector] pcm0: | pcm0: + <- nid=18 [audio selector] pcm0: | pcm0: + <- nid=19 [audio selector] pcm0: | pcm0: + <- nid=26 [audio selector] pcm0: | pcm0: + <- nid=27 [audio selector] pcm0: | pcm0: + <- nid=28 [audio selector] pcm0: | pcm0: + <- nid=29 [audio selector] pcm0: pcm0: nid: 15 [ANALOG] pcm0: name: audio mixer pcm0: widget_cap: 0x00200100 pcm0: Parse flags: 0x00000002 pcm0: Ctl flags: 0x00000000 pcm0: connections: 1 pcm0: | pcm0: + <- nid=11 [audio selector] pcm0: pcm0: nid: 16 [ANALOG] pcm0: name: beep widget pcm0: widget_cap: 0x00700000 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000021 pcm0: connections: 0 pcm0: pcm0: nid: 17 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x0030010d pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000011 pcm0: Output amp: 0x80051f17 pcm0: mute=1 step=31 size=5 offset=23 pcm0: connections: 1 pcm0: | pcm0: + <- nid=3 [audio output] pcm0: pcm0: nid: 18 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x0030010d pcm0: Parse flags: 0x00000002 pcm0: Ctl flags: 0x00000081 pcm0: Output amp: 0x80051f17 pcm0: mute=1 step=31 size=5 offset=23 pcm0: connections: 1 pcm0: | pcm0: + <- nid=8 [pin: Mic in (jack)] pcm0: pcm0: nid: 19 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x0030010d pcm0: Parse flags: 0x00000002 pcm0: Ctl flags: 0x00000041 pcm0: Output amp: 0x80051f17 pcm0: mute=1 step=31 size=5 offset=23 pcm0: connections: 1 pcm0: | pcm0: + <- nid=9 [pin: line in (jack)] pcm0: pcm0: nid: 20 [ANALOG] pcm0: name: power widget pcm0: widget_cap: 0x00500500 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: connections: 6 pcm0: | pcm0: + <- nid=13 [audio selector] (selected) pcm0: | pcm0: + <- nid=14 [audio mixer] pcm0: | pcm0: + <- nid=144 [GHOST!] [UNKNOWN] pcm0: | pcm0: + <- nid=19 [audio selector] pcm0: | pcm0: + <- nid=154 [GHOST!] [UNKNOWN] pcm0: | pcm0: + <- nid=29 [audio selector] pcm0: pcm0: nid: 21 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x0030010d pcm0: Parse flags: 0x00000006 pcm0: Ctl flags: 0x00000800 pcm0: Output amp: 0x80050f00 pcm0: mute=1 step=15 size=5 offset=0 pcm0: connections: 8 pcm0: | pcm0: + <- nid=12 [audio mixer] pcm0: | pcm0: + <- nid=9 [pin: line in (jack)] pcm0: | pcm0: + <- nid=14 [audio mixer] pcm0: | pcm0: + <- nid=15 [audio mixer] pcm0: | pcm0: + <- nid=25 [pin: CD (none)] [DISABLED] pcm0: | pcm0: + <- nid=5 [pin: line out (jack)] pcm0: | pcm0: + <- nid=24 [pin: Mic in (jack)] (selected) pcm0: | pcm0: + <- nid=23 [pin: AUX (none)] [DISABLED] pcm0: pcm0: nid: 22 [ANALOG] pcm0: name: pin: other (fixed) pcm0: widget_cap: 0x00400000 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x00000020 pcm0: IN pcm0: Pin config: 0x90f30050 pcm0: Pin control: 0x00000000 pcm0: connections: 0 pcm0: pcm0: nid: 23 [ANALOG] [DISABLED] pcm0: name: pin: AUX (none) pcm0: widget_cap: 0x00400081 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x00000027 pcm0: ISC TRQD IN : UNSOL pcm0: Pin config: 0x50930044 pcm0: Pin control: 0x00000020 IN pcm0: connections: 0 pcm0: pcm0: nid: 24 [ANALOG] pcm0: name: pin: Mic in (jack) pcm0: widget_cap: 0x00400187 pcm0: Parse flags: 0x00000002 pcm0: Ctl flags: 0x00000081 pcm0: Pin cap: 0x00001737 pcm0: ISC TRQD OUT IN : UNSOL pcm0: Pin config: 0x01a19043 pcm0: Pin control: 0x00000020 IN pcm0: Output amp: 0x80053f3d pcm0: mute=1 step=63 size=5 offset=61 pcm0: Input amp: 0x00270300 pcm0: mute=0 step=3 size=39 offset=0 pcm0: connections: 2 pcm0: | pcm0: + <- nid=3 [audio output] (selected) pcm0: | pcm0: + <- nid=14 [audio mixer] pcm0: pcm0: nid: 25 [ANALOG] [DISABLED] pcm0: name: pin: CD (none) pcm0: widget_cap: 0x00400001 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x00000020 pcm0: IN pcm0: Pin config: 0x50330042 pcm0: Pin control: 0x00000020 IN pcm0: connections: 0 pcm0: pcm0: nid: 26 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x0030010d pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Output amp: 0x80051f17 pcm0: mute=1 step=31 size=5 offset=23 pcm0: connections: 1 pcm0: | pcm0: + <- nid=5 [pin: line out (jack)] pcm0: pcm0: nid: 27 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x0030010d pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Output amp: 0x80051f17 pcm0: mute=1 step=31 size=5 offset=23 pcm0: connections: 1 pcm0: | pcm0: + <- nid=23 [pin: AUX (none)] [DISABLED] pcm0: pcm0: nid: 28 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x0030010d pcm0: Parse flags: 0x00000002 pcm0: Ctl flags: 0x00000081 pcm0: Output amp: 0x80051f17 pcm0: mute=1 step=31 size=5 offset=23 pcm0: connections: 1 pcm0: | pcm0: + <- nid=24 [pin: Mic in (jack)] pcm0: pcm0: nid: 29 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x0030010d pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Output amp: 0x80051f17 pcm0: mute=1 step=31 size=5 offset=23 pcm0: connections: 1 pcm0: | pcm0: + <- nid=25 [pin: CD (none)] [DISABLED] pcm0: pcm0: nid: 30 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x0030010d pcm0: Parse flags: 0x00000002 pcm0: Ctl flags: 0x00000000 pcm0: Output amp: 0x80000000 pcm0: mute=1 step=0 size=0 offset=0 pcm0: connections: 1 pcm0: | pcm0: + <- nid=8 [pin: Mic in (jack)] pcm0: pcm0: nid: 31 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x0030010d pcm0: Parse flags: 0x00000002 pcm0: Ctl flags: 0x00000000 pcm0: Output amp: 0x80000000 pcm0: mute=1 step=0 size=0 offset=0 pcm0: connections: 1 pcm0: | pcm0: + <- nid=24 [pin: Mic in (jack)] pcm0: pcm0: +------------------------+ pcm0: | DUMPING HDA AMPLIFIERS | pcm0: +------------------------+ pcm0: pcm0: 1: nid=5 dir=0x1 index=0 ossmask=0x00000000 ossdev=0 pcm0: 2: nid=5 dir=0x2 index=0 ossmask=0x00000000 ossdev=0 pcm0: 3: nid=6 dir=0x1 index=0 ossmask=0x00000000 ossdev=0 pcm0: 4: nid=7 dir=0x1 index=0 ossmask=0x00000000 ossdev=0 [DISABLED] pcm0: 5: nid=8 dir=0x2 index=0 ossmask=0x00000000 ossdev=0 pcm0: 6: nid=9 dir=0x1 index=0 ossmask=0x00000000 ossdev=0 pcm0: 7: nid=9 dir=0x2 index=0 ossmask=0x00000000 ossdev=0 pcm0: 8: nid=13 dir=0x1 index=0 ossmask=0x00000021 ossdev=5 pcm0: 9: nid=17 dir=0x1 index=0 ossmask=0x00000011 ossdev=4 pcm0: 10: nid=18 dir=0x1 index=0 ossmask=0x00000081 ossdev=7 pcm0: 11: nid=19 dir=0x1 index=0 ossmask=0x00000041 ossdev=6 pcm0: 12: nid=21 dir=0x1 index=0 ossmask=0x00000800 ossdev=0 pcm0: 13: nid=24 dir=0x1 index=0 ossmask=0x00000000 ossdev=0 pcm0: 14: nid=24 dir=0x2 index=0 ossmask=0x00000000 ossdev=0 pcm0: 15: nid=26 dir=0x1 index=0 ossmask=0x00000000 ossdev=0 pcm0: 16: nid=27 dir=0x1 index=0 ossmask=0x00000000 ossdev=0 pcm0: 17: nid=28 dir=0x1 index=0 ossmask=0x00000081 ossdev=7 pcm0: 18: nid=29 dir=0x1 index=0 ossmask=0x00000000 ossdev=0 pcm0: 19: nid=30 dir=0x1 index=0 ossmask=0x00000000 ossdev=0 pcm0: 20: nid=31 dir=0x1 index=0 ossmask=0x00000000 ossdev=0 pcm0: pcm0: +-----------------------------------+ pcm0: | DUMPING HDA AUDIO/VOLUME CONTROLS | pcm0: +-----------------------------------+ pcm0: pcm0: Master Volume (OSS: vol) pcm0: | pcm0: +- nid: 13 index: 0 mute: 1 step: 15 size: 11 off: 15 dir=0x1 ossmask=0x00000021 pcm0: | pcm0: +- nid: 17 index: 0 mute: 1 step: 31 size: 5 off: 23 dir=0x1 ossmask=0x00000011 pcm0: | pcm0: +- nid: 18 index: 0 mute: 1 step: 31 size: 5 off: 23 dir=0x1 ossmask=0x00000081 pcm0: | pcm0: +- nid: 19 index: 0 mute: 1 step: 31 size: 5 off: 23 dir=0x1 ossmask=0x00000041 pcm0: | pcm0: +- nid: 28 index: 0 mute: 1 step: 31 size: 5 off: 23 dir=0x1 ossmask=0x00000081 pcm0: pcm0: PCM Volume (OSS: pcm) pcm0: | pcm0: +- nid: 17 index: 0 mute: 1 step: 31 size: 5 off: 23 dir=0x1 ossmask=0x00000011 pcm0: pcm0: Microphone Volume (OSS: mic) pcm0: | pcm0: +- nid: 18 index: 0 mute: 1 step: 31 size: 5 off: 23 dir=0x1 ossmask=0x00000081 pcm0: | pcm0: +- nid: 28 index: 0 mute: 1 step: 31 size: 5 off: 23 dir=0x1 ossmask=0x00000081 pcm0: pcm0: Line-in Volume (OSS: line) pcm0: | pcm0: +- nid: 19 index: 0 mute: 1 step: 31 size: 5 off: 23 dir=0x1 ossmask=0x00000041 pcm0: pcm0: Recording Level (OSS: rec) pcm0: | pcm0: +- nid: 21 index: 0 mute: 1 step: 15 size: 5 off: 0 dir=0x1 ossmask=0x00000800 pcm0: pcm0: Speaker/Beep (OSS: speaker) pcm0: | pcm0: +- nid: 13 index: 0 mute: 1 step: 15 size: 11 off: 15 dir=0x1 ossmask=0x00000021 pcm0: pcm0: Playback path: pcm0: pcm0: nid=5 [pin: line out (jack)] pcm0: ^ pcm0: | pcm0: +-----<------+ pcm0: ^ pcm0: | pcm0: nid=14 [audio mixer] pcm0: ^ pcm0: | pcm0: nid=17 [audio selector] pcm0: ^ pcm0: | pcm0: nid=3 [audio output] pcm0: pcm0: nid=6 [pin: headphones out (jack)] pcm0: ^ pcm0: | pcm0: +-----<------+ pcm0: ^ pcm0: | pcm0: nid=14 [audio mixer] pcm0: ^ pcm0: | pcm0: nid=17 [audio selector] pcm0: ^ pcm0: | pcm0: nid=3 [audio output] pcm0: pcm0: Recording sources: pcm0: pcm0: nid=21 [audio selector] pcm0: | pcm0: + <- nid=12 [audio mixer] pcm0: | pcm0: + <- nid=9 [pin: line in (jack)] [recsrc: vol, line] pcm0: | pcm0: + <- nid=14 [audio mixer] [recsrc: vol, pcm, speaker, line, mic] pcm0: | pcm0: + <- nid=15 [audio mixer] pcm0: | pcm0: + <- nid=5 [pin: line out (jack)] pcm0: | pcm0: + <- nid=24 [pin: Mic in (jack)] [recsrc: vol, mic] pcm0: pcm0: +--------------------------------------+ pcm0: | DUMPING PCM Playback/Record Channels | pcm0: +--------------------------------------+ pcm0: pcm0: PCM Playback: 1 pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x000e007f pcm0: PCM size: 16 20 24 pcm0: PCM rate: 44 48 88 96 176 192 pcm0: DAC: 3 pcm0: pcm0: PCM Record: 1 pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x0006007f pcm0: PCM size: 16 20 pcm0: PCM rate: 44 48 88 96 176 192 pcm0: ADC: 4 (probe0:ata0:0:0:0): error 22 (probe0:ata0:0:0:0): Unretryable Error (probe0:ata0:0:0:0): error 6 (probe0:ata0:0:0:0): Unretryable Error (probe0:ata0:0:0:0): error 22 (probe0:ata0:0:0:0): Unretryable Error (probe1:sbp0:0:0:0): error 22 (probe1:sbp0:0:0:0): Unretryable Error (probe2:sbp0:0:1:0): error 22 (probe2:sbp0:0:1:0): Unretryable Error (probe3:sbp0:0:2:0): error 22 (probe3:sbp0:0:2:0): Unretryable Error (probe4:sbp0:0:3:0): error 22 (probe4:sbp0:0:3:0): Unretryable Error (probe5:sbp0:0:4:0): error 22 (probe5:sbp0:0:4:0): Unretryable Error (probe6:sbp0:0:5:0): error 22 (probe6:sbp0:0:5:0): Unretryable Error (probe7:sbp0:0:6:0): error 22 (probe7:sbp0:0:6:0): Unretryable Error pass0 at ata0 bus 0 target 0 lun 0 pass0: Removable CD-ROM SCSI-0 device pass0: 16.000MB/s transfers GEOM: new disk cd0 ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010200 err: 0x00010000 pcm: 0x00010000 INTR: Assigning IRQ 1 to local APIC 0 ioapic0: Assigning ISA IRQ 1 to local APIC 0 INTR: Assigning IRQ 4 to local APIC 1 ioapic0: Assigning ISA IRQ 4 to local APIC 1 INTR: Assigning IRQ 7 to local APIC 0 ioapic0: Assigning ISA IRQ 7 to local APIC 0 INTR: Assigning IRQ 9 to local APIC 1 ioapic0: Assigning ISA IRQ 9 to local APIC 1 INTR: Assigning IRQ 12 to local APIC 0 ioapic0: Assigning ISA IRQ 12 to local APIC 0 INTR: Assigning IRQ 14 to local APIC 1 ioapic0: Assigning ISA IRQ 14 to local APIC 1 INTR: Assigning IRQ 15 to local APIC 0 ioapic0: Assigning ISA IRQ 15 to local APIC 0 INTR: Assigning IRQ 16 to local APIC 1 ioapic0: Assigning PCI IRQ 16 to local APIC 1 INTR: Assigning IRQ 17 to local APIC 0 ioapic0: Assigning PCI IRQ 17 to local APIC 0 INTR: Assigning IRQ 18 to local APIC 1 ioapic0: Assigning PCI IRQ 18 to local APIC 1 INTR: Assigning IRQ 19 to local APIC 0 ioapic0: Assigning PCI IRQ 19 to local APIC 0 INTR: Assigning IRQ 20 to local APIC 1 ioapic0: Assigning PCI IRQ 20 to local APIC 1 (cd0:ata0:0:0:0): error 6 (cd0:ata0:0:0:0): Unretryable Error cd0 at ata0 bus 0 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present (cd0:ata0:0:0:0): error 6 (cd0:ata0:0:0:0): Unretryable Error (cd0:ata0:0:0:0): error 6 (cd0:ata0:0:0:0): Unretryable Error (cd0:ata0:0:0:0): error 6 (cd0:ata0:0:0:0): Unretryable Error Trying to mount root from ufs:/dev/ad4s2a start_init: trying /sbin/init acpi_tz0: _AC3: temperature 60.0 >= setpoint 45.0 acpi_tz0: _AC3: temperature 60.0 >= setpoint 45.0 splash: image decoder found: daemon_saver acpi_tz0: _AC3: temperature 60.0 >= setpoint 45.0 acpi_tz0: _AC3: temperature 60.0 >= setpoint 45.0 acpi_tz0: _AC3: temperature 60.0 >= setpoint 45.0 battery1: battery initialization failed, giving up acpi_tz0: _AC3: temperature 60.0 >= setpoint 45.0 acpi_tz0: _AC3: temperature 60.0 >= setpoint 45.0 acpi_tz0: _AC3: temperature 60.0 >= setpoint 45.0 acpi_tz0: _AC3: temperature 60.0 >= setpoint 45.0 acpi_tz0: _AC3: temperature 60.0 >= setpoint 45.0 acpi_tz0: _AC3: temperature 60.0 >= setpoint 45.0 acpi_tz0: _AC3: temperature 60.0 >= setpoint 45.0 acpi_tz0: _AC3: temperature 60.0 >= setpoint 45.0 acpi_tz0: _AC3: temperature 50.0 >= setpoint 45.0 acpi_tz0: _AC3: temperature 50.0 >= setpoint 45.0 acpi_tz0: _CRT value is absurd, ignored (256.0C) acpi_tz0: _AC3: temperature 50.0 >= setpoint 45.0 acpi_tz0: switched from _AC2 to _AC3: 50.0C --=-STXYCKdOyAjC0TaJ1LZW-- From owner-freebsd-acpi@FreeBSD.ORG Fri Oct 20 16:25:47 2006 Return-Path: X-Original-To: acpi@FreeBSD.org Delivered-To: freebsd-acpi@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7337716A40F for ; Fri, 20 Oct 2006 16:25:47 +0000 (UTC) (envelope-from nate@root.org) Received: from root.org (root.org [67.118.192.226]) by mx1.FreeBSD.org (Postfix) with ESMTP id E97B843D45 for ; Fri, 20 Oct 2006 16:25:46 +0000 (GMT) (envelope-from nate@root.org) Received: (qmail 93497 invoked from network); 20 Oct 2006 16:26:20 -0000 Received: from ppp-71-139-31-204.dsl.snfc21.pacbell.net (HELO ?10.0.5.59?) (nate-mail@71.139.31.204) by root.org with ESMTPA; 20 Oct 2006 16:26:20 -0000 Message-ID: <4538F878.9050605@root.org> Date: Fri, 20 Oct 2006 09:25:28 -0700 From: Nate Lawson User-Agent: Thunderbird 1.5.0.7 (Windows/20060909) MIME-Version: 1.0 To: Joel Dahl References: <1161347795.671.14.camel@localhost> In-Reply-To: <1161347795.671.14.camel@localhost> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: acpi@FreeBSD.org Subject: Re: HP NX7400 - ACPI problems X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 20 Oct 2006 16:25:47 -0000 Joel Dahl wrote: > A few notes on running the latest CURRENT (plain GENERIC) on a HP NX7400 > laptop, maybe someone can help me solve these problems: > > # 1 > The following (somewhat annoying) message is repeated on the console all > the time: > > acpi_tz0: _CRT value is absurd, ignored (256.0C) > > # 2 > Sometimes, perhaps one out of ten, the battery isn't detected, so > "acpiconf -i batt" gives me: > > Design capacity: 0 mWh > Last full capacity: 0 mWh > Technology: primary (non-rechargable) > Design voltage: 0 mWh > Capacity (warn): 0 mWh > Capacity (low): 0 mWh > Low/warn granularity: 0 mWh > Warn/full granularity: 0 mWh > Model number: ... > # 4 > I've seen an ACPI-related panic (reported on current@) during boot. > Only happened twice so far though. For reference: > http://people.freebsd.org/~joel/panics/panic001.jpg All part of the same problem. Your EC (embedded controller) is not responding. Check the acpi list archives for some other HP laptops where this occurred and a workaround patch. I'll do my best to turn it into a final patch and get it committed. -- Nate From owner-freebsd-acpi@FreeBSD.ORG Sat Oct 21 05:59:45 2006 Return-Path: X-Original-To: acpi@freebsd.org Delivered-To: freebsd-acpi@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0226016A407 for ; Sat, 21 Oct 2006 05:59:45 +0000 (UTC) (envelope-from redchrom@gmail.com) Received: from ug-out-1314.google.com (ug-out-1314.google.com [66.249.92.171]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5AB7E43D5C for ; Sat, 21 Oct 2006 05:59:44 +0000 (GMT) (envelope-from redchrom@gmail.com) Received: by ug-out-1314.google.com with SMTP id m2so827300uge for ; Fri, 20 Oct 2006 22:59:43 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:date:from:to:subject:message-id:reply-to:mail-followup-to:references:mime-version:content-type:content-disposition:in-reply-to:user-agent:x-useless-header; b=SR25KcBaEBoUr43hmkA6BYSvqXtAMPFqGxMkNcnH9uAdUcVcfv9CaXvuGY0tL9oi0bARzr7mkK4L3f2Pb39zSj4jO7PYJfISKm4oNdlqODcCfKdTGC7WXdNrYPo69/Uwon2wq2a7t75CCzGS8QMH/5YOMZwmcsi7pT5qYxJQNAU= Received: by 10.67.119.9 with SMTP id w9mr1825680ugm; Fri, 20 Oct 2006 22:59:43 -0700 (PDT) Received: from localhost ( [195.46.115.181]) by mx.google.com with ESMTP id 30sm2226986ugf.2006.10.20.22.59.40; Fri, 20 Oct 2006 22:59:42 -0700 (PDT) Date: Sat, 21 Oct 2006 14:59:41 +0900 From: Stepan Zastupov To: acpi@FreeBSD.org Message-ID: <20061021055941.GA1582@stepan.ispsystem.net> Mail-Followup-To: acpi@FreeBSD.org References: <1161347795.671.14.camel@localhost> Mime-Version: 1.0 Content-Type: text/plain; charset=koi8-r Content-Disposition: inline In-Reply-To: <1161347795.671.14.camel@localhost> User-Agent: Mutt/1.4.2.2i X-Useless-Header: They killed Kenny! THOSE BASTARDS! Cc: Subject: Re: HP NX7400 - ACPI problems X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Stepan Zastupov List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 21 Oct 2006 05:59:45 -0000 Hi, i'm using hp nx6110 and most of acpi problems on this laptop caused by the bfe driver, try to remove it from kernel. -- Best regards, Stepan Zastupov aka RedChrom ISPSystem From owner-freebsd-acpi@FreeBSD.ORG Sat Oct 21 08:00:01 2006 Return-Path: X-Original-To: acpi@FreeBSD.org Delivered-To: freebsd-acpi@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8D7F016A417 for ; Sat, 21 Oct 2006 08:00:01 +0000 (UTC) (envelope-from joel@FreeBSD.org) Received: from av10-1-sn2.hy.skanova.net (av10-1-sn2.hy.skanova.net [81.228.8.181]) by mx1.FreeBSD.org (Postfix) with ESMTP id 33D9943D80 for ; Sat, 21 Oct 2006 07:59:55 +0000 (GMT) (envelope-from joel@FreeBSD.org) Received: by av10-1-sn2.hy.skanova.net (Postfix, from userid 502) id EC57A3AFC2; Sat, 21 Oct 2006 09:59:52 +0200 (CEST) Received: from smtp4-1-sn2.hy.skanova.net (smtp4-1-sn2.hy.skanova.net [81.228.8.92]) by av10-1-sn2.hy.skanova.net (Postfix) with ESMTP id BCC9238C9F; Sat, 21 Oct 2006 09:59:52 +0200 (CEST) Received: from dude.automatvapen.se (81-229-112-193-no21.tbcn.telia.com [81.229.112.193]) by smtp4-1-sn2.hy.skanova.net (Postfix) with ESMTP id 8819037E77; Sat, 21 Oct 2006 09:59:42 +0200 (CEST) From: Joel Dahl To: Nate Lawson In-Reply-To: <4538F878.9050605@root.org> References: <1161347795.671.14.camel@localhost> <4538F878.9050605@root.org> Content-Type: text/plain Date: Sat, 21 Oct 2006 09:59:37 +0200 Message-Id: <1161417577.671.2.camel@localhost> Mime-Version: 1.0 X-Mailer: Evolution 2.6.1 FreeBSD GNOME Team Port Content-Transfer-Encoding: 7bit Cc: acpi@FreeBSD.org Subject: Re: HP NX7400 - ACPI problems X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 21 Oct 2006 08:00:01 -0000 On Fri, 2006-10-20 at 09:25 -0700, Nate Lawson wrote: > Joel Dahl wrote: > > A few notes on running the latest CURRENT (plain GENERIC) on a HP NX7400 > > laptop, maybe someone can help me solve these problems: > > > > # 1 > > The following (somewhat annoying) message is repeated on the console all > > the time: > > > > acpi_tz0: _CRT value is absurd, ignored (256.0C) > > > > # 2 > > Sometimes, perhaps one out of ten, the battery isn't detected, so > > "acpiconf -i batt" gives me: > > > > Design capacity: 0 mWh > > Last full capacity: 0 mWh > > Technology: primary (non-rechargable) > > Design voltage: 0 mWh > > Capacity (warn): 0 mWh > > Capacity (low): 0 mWh > > Low/warn granularity: 0 mWh > > Warn/full granularity: 0 mWh > > Model number: > ... > > # 4 > > I've seen an ACPI-related panic (reported on current@) during boot. > > Only happened twice so far though. For reference: > > http://people.freebsd.org/~joel/panics/panic001.jpg > > All part of the same problem. Your EC (embedded controller) is not > responding. Check the acpi list archives for some other HP laptops > where this occurred and a workaround patch. Ok, I searched the archives, but no luck... > I'll do my best to turn it into a final patch and get it committed. That would be awesome, thanks. :-) -- Joel From owner-freebsd-acpi@FreeBSD.ORG Sat Oct 21 15:32:38 2006 Return-Path: X-Original-To: freebsd-acpi@freebsd.org Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 85E9216A415; Sat, 21 Oct 2006 15:32:38 +0000 (UTC) (envelope-from ru@rambler-co.ru) Received: from relay0.rambler.ru (relay0.rambler.ru [81.19.66.187]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9690C43D8C; Sat, 21 Oct 2006 15:32:23 +0000 (GMT) (envelope-from ru@rambler-co.ru) Received: from relay0.rambler.ru (localhost [127.0.0.1]) by relay0.rambler.ru (Postfix) with ESMTP id 536EE6E8D; Sat, 21 Oct 2006 19:32:20 +0400 (MSD) Received: from edoofus.park.rambler.ru (unknown [81.19.65.108]) by relay0.rambler.ru (Postfix) with ESMTP id 36B0871C5; Sat, 21 Oct 2006 19:17:38 +0400 (MSD) Received: (from ru@localhost) by edoofus.park.rambler.ru (8.13.8/8.13.8) id k9LFHiED052330; Sat, 21 Oct 2006 19:17:44 +0400 (MSD) (envelope-from ru) Date: Sat, 21 Oct 2006 19:17:44 +0400 From: Ruslan Ermilov To: Jung-uk Kim Message-ID: <20061021151744.GA52140@rambler-co.ru> References: <200610102126.24853.jkim@FreeBSD.org> MIME-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="huq684BweRXVnRxX" Content-Disposition: inline In-Reply-To: <200610102126.24853.jkim@FreeBSD.org> User-Agent: Mutt/1.5.13 (2006-08-11) X-Virus-Scanned: No virus found Cc: freebsd-acpi@freebsd.org Subject: Re: [PATCH] ACPI-CA 20060912 X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 21 Oct 2006 15:32:38 -0000 --huq684BweRXVnRxX Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Tue, Oct 10, 2006 at 09:26:21PM -0400, Jung-uk Kim wrote: > FYI, merge from the latest ACPI-CA (downloaded from Intel web site)=20 > and the patch against HEAD is here: >=20 > http://people.freebsd.org/~jkim/acpica-import-20060912.diff.gz >=20 > (Note: There are removed files and added files. Don't forget '-p'=20 > option when you patch.) >=20 Kernel doesn't compile when this patch applied cleanly to a fresh -CURRENT: : =3D=3D=3D> acpi/acpi (all) : cc -O2 -fno-strict-aliasing -pipe -march=3Dpentiumpro -DACPI_USE_LOCAL_CA= CHE -Werror -D_KERNEL -DKLD_MODULE -std=3Dc99 -nostdinc -I- -I/usr/src/sys= /modules/acpi/acpi/../../../contrib/dev/acpica -DHAVE_KERNEL_OPTION_HEADERS= -include /usr/obj/usr/src/sys/LURKER/opt_global.h -I. -I@ -I@/contrib/altq= -finline-limit=3D8000 --param inline-unit-growth=3D100 --param large-funct= ion-growth=3D1000 -fno-common -g -I/usr/obj/usr/src/sys/LURKER -mno-align-l= ong-strings -mpreferred-stack-boundary=3D2 -mno-mmx -mno-3dnow -mno-sse -m= no-sse2 -mno-sse3 -ffreestanding -Wall -Wredundant-decls -Wnested-externs -= Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qu= al -Wundef -fformat-extensions -c /usr/src/sys/modules/acpi/acpi/../../../= contrib/dev/acpica/dsfield.c : In file included from @/contrib/dev/acpica/acenv.h:230, : from @/contrib/dev/acpica/acpi.h:127, : from /usr/src/sys/modules/acpi/acpi/../../../contrib/dev= /acpica/dsfield.c:119: : @/contrib/dev/acpica/acfreebsd.h:129:1: "ACPI_USE_LOCAL_CACHE" redefined : :2:1: this is the location of the previous definition : *** Error code 1 :=20 : Stop in /usr/src/sys/modules/acpi/acpi. : *** Error code 1 Cheers, --=20 Ruslan Ermilov ru@FreeBSD.org FreeBSD committer --huq684BweRXVnRxX Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (FreeBSD) iD8DBQFFOjoYqRfpzJluFF4RAhVcAJ4rPlNi+cyJ7EiVZZ1x9rsJQnB3tgCfRzJ/ Dg+QRQzPLh7h3yXd6pU741Y= =XaxY -----END PGP SIGNATURE----- --huq684BweRXVnRxX-- From owner-freebsd-acpi@FreeBSD.ORG Sat Oct 21 16:52:21 2006 Return-Path: X-Original-To: freebsd-acpi@hub.freebsd.org Delivered-To: freebsd-acpi@hub.freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6216616A407; Sat, 21 Oct 2006 16:52:21 +0000 (UTC) (envelope-from linimon@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [216.136.204.21]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1B15243D5E; Sat, 21 Oct 2006 16:52:21 +0000 (GMT) (envelope-from linimon@FreeBSD.org) Received: from freefall.freebsd.org (linimon@localhost [127.0.0.1]) by freefall.freebsd.org (8.13.4/8.13.4) with ESMTP id k9LGqKJc087530; Sat, 21 Oct 2006 16:52:20 GMT (envelope-from linimon@freefall.freebsd.org) Received: (from linimon@localhost) by freefall.freebsd.org (8.13.4/8.13.4/Submit) id k9LGqKHU087526; Sat, 21 Oct 2006 16:52:20 GMT (envelope-from linimon) Date: Sat, 21 Oct 2006 16:52:20 GMT From: Mark Linimon Message-Id: <200610211652.k9LGqKHU087526@freefall.freebsd.org> To: linimon@FreeBSD.org, freebsd-bugs@FreeBSD.org, freebsd-acpi@FreeBSD.org Cc: Subject: Re: kern/104625: ACPI on ASUS A8N-32 SLI/ASUS P4P800 does not show thermal zones or fan speed X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 21 Oct 2006 16:52:21 -0000 Synopsis: ACPI on ASUS A8N-32 SLI/ASUS P4P800 does not show thermal zones or fan speed Responsible-Changed-From-To: freebsd-bugs->freebsd-acpi Responsible-Changed-By: linimon Responsible-Changed-When: Sat Oct 21 16:51:53 UTC 2006 Responsible-Changed-Why: Over to maintainer(s). http://www.freebsd.org/cgi/query-pr.cgi?pr=104625