From owner-freebsd-scsi@FreeBSD.ORG Mon Oct 8 11:08:39 2007 Return-Path: Delivered-To: freebsd-scsi@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 5D07C16A421 for ; Mon, 8 Oct 2007 11:08:39 +0000 (UTC) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 449D413C465 for ; Mon, 8 Oct 2007 11:08:39 +0000 (UTC) (envelope-from owner-bugmaster@FreeBSD.org) Received: from freefall.freebsd.org (gnats@localhost [127.0.0.1]) by freefall.freebsd.org (8.14.1/8.14.1) with ESMTP id l98B8dx9083442 for ; Mon, 8 Oct 2007 11:08:39 GMT (envelope-from owner-bugmaster@FreeBSD.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.1/8.14.1/Submit) id l98B8cQA083438 for freebsd-scsi@FreeBSD.org; Mon, 8 Oct 2007 11:08:38 GMT (envelope-from owner-bugmaster@FreeBSD.org) Date: Mon, 8 Oct 2007 11:08:38 GMT Message-Id: <200710081108.l98B8cQA083438@freefall.freebsd.org> X-Authentication-Warning: freefall.freebsd.org: gnats set sender to owner-bugmaster@FreeBSD.org using -f From: FreeBSD bugmaster To: freebsd-scsi@FreeBSD.org Cc: Subject: Current problem reports assigned to you X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 08 Oct 2007 11:08:39 -0000 Current FreeBSD problem reports Critical problems Serious problems S Tracker Resp. Description -------------------------------------------------------------------------------- o kern/39388 scsi ncr/sym drivers fail with 53c810 and more than 256MB m o kern/40895 scsi wierd kernel / device driver bug o kern/52638 scsi [panic] SCSI U320 on SMP server won't run faster than s kern/57398 scsi [mly] Current fails to install on mly(4) based RAID di o kern/60598 scsi wire down of scsi devices conflicts with config o kern/60641 scsi [sym] Sporadic SCSI bus resets with 53C810 under load s kern/61165 scsi [panic] kernel page fault after calling cam_send_ccb o kern/74627 scsi [ahc] [hang] Adaptec 2940U2W Can't boot 5.3 o kern/81887 scsi [aac] Adaptec SCSI 2130S aac0: GetDeviceProbeInfo comm o kern/90282 scsi [sym] SCSI bus resets cause loss of ch device o kern/92798 scsi [ahc] SCSI problem with timeouts o kern/93128 scsi [sym] FreeBSD 6.1 BETA 1 has problems with Symbios/LSI o kern/94838 scsi Kernel panic while mounting SD card with lock switch o o kern/99954 scsi [ahc] reading from DVD failes on 6.x (regression) o kern/110847 scsi [ahd] Tyan U320 onboard problem with more than 3 disks 15 problems total. Non-critical problems S Tracker Resp. Description -------------------------------------------------------------------------------- o kern/23314 scsi [aic] aic driver fails to detect Adaptec 1520B unless o kern/35234 scsi World access to /dev/pass? (for scanner) requires acce o kern/38828 scsi [feature request] DPT PM2012B/90 doesn't work o kern/44587 scsi dev/dpt/dpt.h is missing defines required for DPT_HAND o kern/76178 scsi [ahd] Problem with ahd and large SCSI Raid system o kern/114597 scsi [sym] System hangs at SCSI bus reset with dual HBAs 6 problems total. From owner-freebsd-scsi@FreeBSD.ORG Mon Oct 8 13:30:52 2007 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id F0FAD16A41A for ; Mon, 8 Oct 2007 13:30:52 +0000 (UTC) (envelope-from supportsobaka@mail.ru) Received: from mx4.mail.ru (fallback.mail.ru [194.67.57.14]) by mx1.freebsd.org (Postfix) with ESMTP id A5ECF13C448 for ; Mon, 8 Oct 2007 13:30:52 +0000 (UTC) (envelope-from supportsobaka@mail.ru) Received: from mx33.mail.ru (mx33.mail.ru [194.67.23.194]) by mx4.mail.ru (mPOP.Fallback_MX) with ESMTP id E28181D3B2 for ; Mon, 8 Oct 2007 13:46:32 +0400 (MSD) Received: from [212.176.204.213] (port=9600 helo=A) by mx33.mail.ru with asmtp id 1IepBy-000DaW-00 for freebsd-scsi@freebsd.org; Mon, 08 Oct 2007 13:46:26 +0400 Date: Mon, 8 Oct 2007 13:46:26 +0400 From: supportsobaka@mail.ru X-Mailer: The Bat! (v3.85.03) Professional Organization: supportsobaka@mail.ru X-Priority: 3 (Normal) Message-ID: <466670819.20071008134626@mail.ru> To: freebsd-scsi@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Subject: LSI SAS 1064E in FreeBSD 6.2 X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: supportsobaka@mail.ru List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 08 Oct 2007 13:30:53 -0000 Hello Is any way to use new mpt driver from FreeBSD 7 on FreeBSD 6.2 (need LSI SAS 1064E support) -- supportsobaka@mail.ru From owner-freebsd-scsi@FreeBSD.ORG Mon Oct 8 16:59:31 2007 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id C270C16A419 for ; Mon, 8 Oct 2007 16:59:31 +0000 (UTC) (envelope-from delphij@delphij.net) Received: from tarsier.geekcn.org (tarsier.geekcn.org [210.51.165.229]) by mx1.freebsd.org (Postfix) with ESMTP id 7AC7413C46A for ; Mon, 8 Oct 2007 16:59:31 +0000 (UTC) (envelope-from delphij@delphij.net) Received: from localhost (tarsier.geekcn.org [210.51.165.229]) by tarsier.geekcn.org (Postfix) with ESMTP id 565B3EB9033; Tue, 9 Oct 2007 00:41:13 +0800 (CST) X-Virus-Scanned: amavisd-new at geekcn.org Received: from tarsier.geekcn.org ([210.51.165.229]) by localhost (mail.geekcn.org [210.51.165.229]) (amavisd-new, port 10024) with ESMTP id wHjbfEyPJhzg; Tue, 9 Oct 2007 00:41:02 +0800 (CST) Received: from LI-Xins-MacBook.local (71.5.7.139.ptr.us.xo.net [71.5.7.139]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by tarsier.geekcn.org (Postfix) with ESMTP id E1923EB910B; Tue, 9 Oct 2007 00:41:01 +0800 (CST) DomainKey-Signature: a=rsa-sha1; s=default; d=delphij.net; c=nofws; q=dns; h=message-id:date:from:reply-to:organization:user-agent: mime-version:to:cc:subject:references:in-reply-to: x-enigmail-version:openpgp:content-type; b=XiF/qA3rWkpythy2DgjyjsAT16yNO4MLVZ9IWwclVunIxtk14DwkSZaS7Cvf/38uF YKp6VvNOay0VamGgi9itg== Message-ID: <470A5D94.3040304@delphij.net> Date: Mon, 08 Oct 2007 09:40:52 -0700 From: LI Xin Organization: The FreeBSD Project User-Agent: Thunderbird 2.0.0.6 (Macintosh/20070728) MIME-Version: 1.0 To: supportsobaka@mail.ru References: <466670819.20071008134626@mail.ru> In-Reply-To: <466670819.20071008134626@mail.ru> X-Enigmail-Version: 0.95.3 OpenPGP: url=http://www.delphij.net/delphij.asc Content-Type: multipart/signed; micalg=pgp-sha512; protocol="application/pgp-signature"; boundary="------------enig4ED73C08A30DEFCF709D2175" Cc: freebsd-scsi@freebsd.org Subject: Re: LSI SAS 1064E in FreeBSD 6.2 X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: d@delphij.net List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 08 Oct 2007 16:59:31 -0000 This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --------------enig4ED73C08A30DEFCF709D2175 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable supportsobaka@mail.ru wrote: > Hello >=20 >=20 > Is any way to use new mpt driver from FreeBSD 7 on FreeBSD 6.2 (need LS= I > SAS 1064E support) I think it was supported on 6.2-RELEASE (according to code), no? Cheers, --=20 Xin LI http://www.delphij.net/ FreeBSD - The Power to Serve! --------------enig4ED73C08A30DEFCF709D2175 Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHCl2UOfuToMruuMARCozIAJ0X07YhpMTcMox9T/sXJHNlLcYChwCeOzMY cFavkq3eMLsISd9yM6nSCYY= =TRpc -----END PGP SIGNATURE----- --------------enig4ED73C08A30DEFCF709D2175-- From owner-freebsd-scsi@FreeBSD.ORG Tue Oct 9 19:00:58 2007 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 133AF16A419 for ; Tue, 9 Oct 2007 19:00:58 +0000 (UTC) (envelope-from supportsobaka@mail.ru) Received: from mx27.mail.ru (mx27.mail.ru [194.67.23.64]) by mx1.freebsd.org (Postfix) with ESMTP id A3EC513C48D for ; Tue, 9 Oct 2007 19:00:57 +0000 (UTC) (envelope-from supportsobaka@mail.ru) Received: from [212.176.204.213] (port=43872 helo=A) by mx27.mail.ru with asmtp id 1IfKK8-000Jj9-00 for freebsd-scsi@freebsd.org; Tue, 09 Oct 2007 23:00:56 +0400 Date: Tue, 9 Oct 2007 23:00:57 +0400 From: supportsobaka@mail.ru X-Mailer: The Bat! (v3.85.03) Professional Organization: supportsobaka@mail.ru X-Priority: 3 (Normal) Message-ID: <561442888.20071009230057@mail.ru> To: freebsd-scsi@freebsd.org In-Reply-To: <470A5D94.3040304@delphij.net> References: <466670819.20071008134626@mail.ru> <470A5D94.3040304@delphij.net> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Subject: Re[2]: LSI SAS 1064E in FreeBSD 6.2 X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: supportsobaka@mail.ru List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 09 Oct 2007 19:00:58 -0000 Hello LX> I think it was supported on 6.2-RELEASE (according to code), no? LX> Cheers, No: http://www.freebsd.org/cgi/man.cgi?query=mpt&sektion=4&manpath=FreeBSD+6.2-RELEASE SAS support only here: http://www.freebsd.org/cgi/man.cgi?query=mpt&apropos=0&sektion=4&manpath=FreeBSD+7-current&format=html Hardware notes for 7.x The following controllers are supported by the mpt(4) driver: ... LSI Logic **AS1064**, LSI Logic AS1068 .... These systems also contain Integrated Raid Mirroring and Integrated Raid Mirroring Enhanced which this driver also supports. The SAS controller chips are also present on many new AMD/Opteron based systems, like the Sun 4100. Note that this controller can drive both SAS and SATA drives or a mix of them at the same time. The Integrated Raid Mirroring available for these controllers is poorly supported at best.... So, is it possible to backport this driver to 6.2 ?! From owner-freebsd-scsi@FreeBSD.ORG Tue Oct 9 19:14:43 2007 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 1D96A16A418 for ; Tue, 9 Oct 2007 19:14:43 +0000 (UTC) (envelope-from delphij@delphij.net) Received: from tarsier.geekcn.org (tarsier.geekcn.org [210.51.165.229]) by mx1.freebsd.org (Postfix) with ESMTP id A2D8F13C467 for ; Tue, 9 Oct 2007 19:14:42 +0000 (UTC) (envelope-from delphij@delphij.net) Received: from localhost (tarsier.geekcn.org [210.51.165.229]) by tarsier.geekcn.org (Postfix) with ESMTP id 4B08DEB556F; Wed, 10 Oct 2007 03:14:41 +0800 (CST) X-Virus-Scanned: amavisd-new at geekcn.org Received: from tarsier.geekcn.org ([210.51.165.229]) by localhost (mail.geekcn.org [210.51.165.229]) (amavisd-new, port 10024) with ESMTP id GHsSbGpHqyVZ; Wed, 10 Oct 2007 03:14:36 +0800 (CST) Received: from LI-Xins-MacBook.local (71.5.7.139.ptr.us.xo.net [71.5.7.139]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by tarsier.geekcn.org (Postfix) with ESMTP id CDBF6EB3F51; Wed, 10 Oct 2007 03:14:35 +0800 (CST) DomainKey-Signature: a=rsa-sha1; s=default; d=delphij.net; c=nofws; q=dns; h=message-id:date:from:reply-to:organization:user-agent: mime-version:to:cc:subject:references:in-reply-to: x-enigmail-version:openpgp:content-type; b=NRuhS2C2gJBBTx3xbz1I+XVm523hGWLnsJ1ppnGyf8DiCKz33PEyxGIThuNaB9lpU HvVonhT/HpB9k1v/aC2Gg== Message-ID: <470BD317.1020209@delphij.net> Date: Tue, 09 Oct 2007 12:14:31 -0700 From: LI Xin Organization: The FreeBSD Project User-Agent: Thunderbird 2.0.0.6 (Macintosh/20070728) MIME-Version: 1.0 To: supportsobaka@mail.ru References: <466670819.20071008134626@mail.ru> <470A5D94.3040304@delphij.net> <561442888.20071009230057@mail.ru> In-Reply-To: <561442888.20071009230057@mail.ru> X-Enigmail-Version: 0.95.3 OpenPGP: url=http://www.delphij.net/delphij.asc Content-Type: multipart/signed; micalg=pgp-sha512; protocol="application/pgp-signature"; boundary="------------enig1EB68262FA3F11BCBCD96D64" Cc: freebsd-scsi@freebsd.org Subject: Re: LSI SAS 1064E in FreeBSD 6.2 X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: d@delphij.net List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 09 Oct 2007 19:14:43 -0000 This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --------------enig1EB68262FA3F11BCBCD96D64 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable supportsobaka@mail.ru wrote: > Hello >=20 >=20 > LX> I think it was supported on 6.2-RELEASE (according to code), no? >=20 > LX> Cheers, >=20 > No: > http://www.freebsd.org/cgi/man.cgi?query=3Dmpt&sektion=3D4&manpath=3DFr= eeBSD+6.2-RELEASE >=20 > SAS support only here: > http://www.freebsd.org/cgi/man.cgi?query=3Dmpt&apropos=3D0&sektion=3D4&= manpath=3DFreeBSD+7-current&format=3Dhtml >=20 > Hardware notes for 7.x >=20 > The following controllers are supported by the mpt(4) driver: > ... > LSI Logic **AS1064**, LSI Logic AS1068 > .... No, this is just because the documentation lagging behind code change, but the code is there so it should work. The support was MFC'ed at: Thu Jun 8 17:47:35 2006 UTC (16 months ago) by mjacob. Therefore, if it does not work, could you please let us know (preferably with pciconf -lv output if you could, so we will be able to figure out what's happening) so we can fix it? > These systems also contain Integrated Raid Mirroring and Integrated > Raid Mirroring Enhanced which this driver also supports. The SAS > controller chips are also present on many new AMD/Opteron based > systems, like the Sun 4100. Note that this controller can drive both > SAS and SATA drives or a mix of them at the same time. The Integrated > Raid Mirroring available for these controllers is poorly supported at > best.... >=20 >=20 > So, is it possible to backport this driver to 6.2 ?! Cheers, --=20 Xin LI http://www.delphij.net/ FreeBSD - The Power to Serve! --------------enig1EB68262FA3F11BCBCD96D64 Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHC9MXOfuToMruuMARCgb7AJ9sHpvFdEQi9aJsbGEIUxIVZ9mH9QCdGOa6 By3Q8eX7R2yA9rd91sp7ibI= =czHO -----END PGP SIGNATURE----- --------------enig1EB68262FA3F11BCBCD96D64-- From owner-freebsd-scsi@FreeBSD.ORG Wed Oct 10 08:36:13 2007 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id DA99F16A417; Wed, 10 Oct 2007 08:36:13 +0000 (UTC) (envelope-from mohacsi@niif.hu) Received: from mail.ki.iif.hu (mail.ki.iif.hu [193.6.222.241]) by mx1.freebsd.org (Postfix) with ESMTP id 9C7BD13C43E; Wed, 10 Oct 2007 08:36:13 +0000 (UTC) (envelope-from mohacsi@niif.hu) Received: from localhost (localhost [IPv6:::1]) by mail.ki.iif.hu (Postfix) with ESMTP id D1FFF848D4; Wed, 10 Oct 2007 10:19:05 +0200 (CEST) X-Virus-Scanned: by amavisd-new at mignon.ki.iif.hu Received: from mail.ki.iif.hu ([127.0.0.1]) by localhost (mignon.ki.iif.hu [127.0.0.1]) (amavisd-new, port 10024) with LMTP id s-1Nfg3fPcXo; Wed, 10 Oct 2007 10:19:03 +0200 (CEST) Received: by mail.ki.iif.hu (Postfix, from userid 9002) id 5E95B84807; Wed, 10 Oct 2007 10:19:03 +0200 (CEST) To: FreeBSD-gnats-submit@freebsd.org From: Mohacsi Janos X-send-pr-version: 3.113 X-GNATS-Notify: Message-Id: <20071010081903.5E95B84807@mail.ki.iif.hu> Date: Wed, 10 Oct 2007 10:19:03 +0200 (CEST) Cc: freebsd-scsi@freebsd.org Subject: isp0 messages in the log X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Mohacsi Janos List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 10 Oct 2007 08:36:13 -0000 >Submitter-Id: current-users >Originator: Mohacsi Janos >Organization: NIIF >Confidential: no >Synopsis: isp0 messages in the log >Severity: non-critical >Priority: low >Category: kern >Class: sw-bug >Release: FreeBSD 6.2-STABLE i386 >Environment: System: FreeBSD mignon.ki.iif.hu 6.2-STABLE FreeBSD 6.2-STABLE #10: Thu Jul 12 20:44:48 CEST 2007 root@mignon2.ki.iif.hu:/usr/obj/usr/src/sys/MIGNON2 i386 >Description: On the device isp0 with FC attached storage: isp0: [GIANT-LOCKED] isp0: Board Type 2200, Chip Revision 0x5, loaded F/W Revision 2.2.6 da1 at isp0 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-4 device da1: 100.000MB/s transfers, Tagged Queueing Enabled da1: 547419MB (1121114624 512 byte sectors: 255H 63S/T 69786C) the messages: isp0: Command for fast post handle 0x27c not found isp0: Command for fast post handle 0x27e not found isp0: Command for fast post handle 0x1a8 not found isp0: Command for fast post handle 0x238 not found isp0: Command for fast post handle 0x239 not found isp0: Command for fast post handle 0x23a not found isp0: Command for fast post handle 0x2fe not found isp0: Command for fast post handle 0x301 not found isp0: Command for fast post handle 0x386 not found isp0: Command for fast post handle 0x385 not found isp0: Command for fast post handle 0x351 not found isp0: Command for fast post handle 0x352 not found isp0: Command for fast post handle 0x1c5 not found ... Should I worry or safely ignore theese messages which appear 10-20 times daily? >How-To-Repeat: try using isp qlogic card. >Fix: is it cosmetical or serious From owner-freebsd-scsi@FreeBSD.ORG Wed Oct 10 14:48:38 2007 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id C0ED716A41A for ; Wed, 10 Oct 2007 14:48:38 +0000 (UTC) (envelope-from scottl@samsco.org) Received: from pooker.samsco.org (pooker.samsco.org [168.103.85.57]) by mx1.freebsd.org (Postfix) with ESMTP id 5A6E513C461 for ; Wed, 10 Oct 2007 14:48:38 +0000 (UTC) (envelope-from scottl@samsco.org) Received: from phobos.samsco.home (phobos.samsco.home [192.168.254.11]) (authenticated bits=0) by pooker.samsco.org (8.13.8/8.13.8) with ESMTP id l9AEmAYX033863; Wed, 10 Oct 2007 08:48:11 -0600 (MDT) (envelope-from scottl@samsco.org) Message-ID: <470CE612.2060102@samsco.org> Date: Wed, 10 Oct 2007 08:47:46 -0600 From: Scott Long User-Agent: Mozilla/5.0 (Macintosh; U; Intel Mac OS X; en-US; rv:1.8.1.6) Gecko/20070802 SeaMonkey/1.1.4 MIME-Version: 1.0 To: Mohacsi Janos References: <20071010081903.5E95B84807@mail.ki.iif.hu> In-Reply-To: <20071010081903.5E95B84807@mail.ki.iif.hu> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Greylist: Sender succeeded SMTP AUTH authentication, not delayed by milter-greylist-2.0.2 (pooker.samsco.org [168.103.85.57]); Wed, 10 Oct 2007 08:48:11 -0600 (MDT) X-Spam-Status: No, score=-1.4 required=5.5 tests=ALL_TRUSTED autolearn=failed version=3.1.8 X-Spam-Checker-Version: SpamAssassin 3.1.8 (2007-02-13) on pooker.samsco.org Cc: freebsd-scsi@freebsd.org, FreeBSD-gnats-submit@freebsd.org Subject: Re: isp0 messages in the log X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 10 Oct 2007 14:48:38 -0000 Mohacsi Janos wrote: >> Submitter-Id: current-users >> Originator: Mohacsi Janos >> Organization: NIIF >> Confidential: no >> Synopsis: isp0 messages in the log >> Severity: non-critical >> Priority: low >> Category: kern >> Class: sw-bug >> Release: FreeBSD 6.2-STABLE i386 >> Environment: > System: FreeBSD mignon.ki.iif.hu 6.2-STABLE FreeBSD 6.2-STABLE #10: Thu Jul 12 20:44:48 CEST 2007 root@mignon2.ki.iif.hu:/usr/obj/usr/src/sys/MIGNON2 i386 > >> Description: > On the device isp0 with FC attached storage: > > isp0: [GIANT-LOCKED] > isp0: Board Type 2200, Chip Revision 0x5, loaded F/W Revision 2.2.6 > da1 at isp0 bus 0 target 1 lun 0 > da1: Fixed Direct Access SCSI-4 device > da1: 100.000MB/s transfers, Tagged Queueing Enabled > da1: 547419MB (1121114624 512 byte sectors: 255H 63S/T 69786C) > > the messages: > isp0: Command for fast post handle 0x27c not found > isp0: Command for fast post handle 0x27e not found > isp0: Command for fast post handle 0x1a8 not found > isp0: Command for fast post handle 0x238 not found > isp0: Command for fast post handle 0x239 not found > isp0: Command for fast post handle 0x23a not found > isp0: Command for fast post handle 0x2fe not found > isp0: Command for fast post handle 0x301 not found > isp0: Command for fast post handle 0x386 not found > isp0: Command for fast post handle 0x385 not found > isp0: Command for fast post handle 0x351 not found > isp0: Command for fast post handle 0x352 not found > isp0: Command for fast post handle 0x1c5 not found > ... > > Should I worry or safely ignore theese messages which appear 10-20 times > daily? > > >> How-To-Repeat: > try using isp qlogic card. >> Fix: > is it cosmetical or serious If it's not causing I/O to stall and the system to eventually freeze/panic, it's probably cosmetic. I don't know enough about the Qlogic hardware to know exactly why it's happening. Scott From owner-freebsd-scsi@FreeBSD.ORG Thu Oct 11 07:24:37 2007 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id A5A9F16A417 for ; Thu, 11 Oct 2007 07:24:37 +0000 (UTC) (envelope-from supportsobaka@mail.ru) Received: from mx34.mail.ru (mx38.mail.ru [194.67.23.34]) by mx1.freebsd.org (Postfix) with ESMTP id 74A9C13C45D for ; Thu, 11 Oct 2007 07:24:37 +0000 (UTC) (envelope-from supportsobaka@mail.ru) Received: from [212.176.204.213] (port=12639 helo=A) by mx34.mail.ru with asmtp id 1IfsNq-0004ci-00; Thu, 11 Oct 2007 11:23:02 +0400 Date: Thu, 11 Oct 2007 11:24:28 +0400 From: supportsobaka@mail.ru X-Mailer: The Bat! (v3.85.03) Professional Organization: supportsobaka@mail.ru X-Priority: 3 (Normal) Message-ID: <708336321.20071011112428@mail.ru> To: LI Xin In-Reply-To: <470BD317.1020209@delphij.net> References: <466670819.20071008134626@mail.ru> <470A5D94.3040304@delphij.net> <561442888.20071009230057@mail.ru> <470BD317.1020209@delphij.net> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Cc: freebsd-scsi@freebsd.org Subject: Re[2]: LSI SAS 1064E in FreeBSD 6.2 X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: supportsobaka@mail.ru List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 11 Oct 2007 07:24:37 -0000 Hello >> ... >> LSI Logic **AS1064**, LSI Logic AS1068 >> .... LX> No, this is just because the documentation lagging behind code change, LX> but the code is there so it should work. LX> The support was MFC'ed at: Thu Jun 8 17:47:35 2006 UTC (16 months ago) LX> by mjacob. LX> Therefore, if it does not work, could you please let us know (preferably LX> with pciconf -lv output if you could, so we will be able to figure out LX> what's happening) so we can fix it? It is impossible even start system now. It stops before HDD's initialization, after: Timecounters tick every 1.000 msec ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to accept, logging limited to 100 packets/entry by default Boot from CD not helped too :( We will try today something else... Is any idea from you, how to boot system on this machine with LSI SAS 1064E controller? -- mailto:supportsobaka@mail.ru From owner-freebsd-scsi@FreeBSD.ORG Thu Oct 11 07:40:13 2007 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 8933416A41A for ; Thu, 11 Oct 2007 07:40:13 +0000 (UTC) (envelope-from supportsobaka@mail.ru) Received: from mx6.mail.ru (mx6.mail.ru [194.67.23.26]) by mx1.freebsd.org (Postfix) with ESMTP id 5F24713C46A for ; Thu, 11 Oct 2007 07:40:13 +0000 (UTC) (envelope-from supportsobaka@mail.ru) Received: from [212.176.204.213] (port=51621 helo=A) by mx6.mail.ru with asmtp id 1IfseK-0006jI-00; Thu, 11 Oct 2007 11:40:04 +0400 Date: Thu, 11 Oct 2007 11:40:04 +0400 From: supportsobaka@mail.ru X-Mailer: The Bat! (v3.85.03) Professional Organization: supportsobaka@mail.ru X-Priority: 3 (Normal) Message-ID: <902552335.20071011114004@mail.ru> To: freebsdlists@bsdunix.ch MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Cc: freebsd-scsi@freebsd.org Subject: Which SCSI Raid controller? X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: supportsobaka@mail.ru List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 11 Oct 2007 07:40:13 -0000 Hello You can use Adaptec 2130 We have no problem with it You can use /usr/ports/sysutils/aaccli for admin controller and HDD From owner-freebsd-scsi@FreeBSD.ORG Thu Oct 11 10:48:26 2007 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id C7FB416A41B for ; Thu, 11 Oct 2007 10:48:26 +0000 (UTC) (envelope-from supportsobaka@mail.ru) Received: from mx3.mail.ru (mx3.mail.ru [194.67.23.149]) by mx1.freebsd.org (Postfix) with ESMTP id ABA2C13C46E for ; Thu, 11 Oct 2007 10:48:26 +0000 (UTC) (envelope-from supportsobaka@mail.ru) Received: from [212.176.204.213] (port=30802 helo=A) by mx3.mail.ru with asmtp id 1Ifvaa-0005F4-00; Thu, 11 Oct 2007 14:48:24 +0400 Date: Thu, 11 Oct 2007 14:48:22 +0400 From: supportsobaka@mail.ru X-Mailer: The Bat! (v3.85.03) Professional Organization: supportsobaka@mail.ru X-Priority: 3 (Normal) Message-ID: <76421680.20071011144822@mail.ru> To: freebsdlists@bsdunix.ch MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Cc: freebsd-scsi@freebsd.org Subject: Re[2]: Which SCSI Raid controller? X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: supportsobaka@mail.ru List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 11 Oct 2007 10:48:26 -0000 Hello >In the past I was very happy with Adaptec 2100S but it's EOL. I don't >like the new Adaptec 2120 and 2130 cards. Mainly because there is no cli >tool available which works well. >Regards, >Thomas You can use Adaptec 2130 We have no problem with it You can use /usr/ports/sysutils/aaccli for admin controller and HDD From owner-freebsd-scsi@FreeBSD.ORG Fri Oct 12 07:38:10 2007 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 260F916A419 for ; Fri, 12 Oct 2007 07:38:10 +0000 (UTC) (envelope-from delphij@delphij.net) Received: from tarsier.geekcn.org (tarsier.geekcn.org [210.51.165.229]) by mx1.freebsd.org (Postfix) with ESMTP id B36EE13C478 for ; Fri, 12 Oct 2007 07:38:09 +0000 (UTC) (envelope-from delphij@delphij.net) Received: from localhost (tarsier.geekcn.org [210.51.165.229]) by tarsier.geekcn.org (Postfix) with ESMTP id 989AAEC1D14; Fri, 12 Oct 2007 15:38:08 +0800 (CST) X-Virus-Scanned: amavisd-new at geekcn.org Received: from tarsier.geekcn.org ([210.51.165.229]) by localhost (mail.geekcn.org [210.51.165.229]) (amavisd-new, port 10024) with ESMTP id bX0bZPQw5yGK; Fri, 12 Oct 2007 15:38:04 +0800 (CST) Received: from LI-Xins-MacBook.local (c-67-161-39-180.hsd1.ca.comcast.net [67.161.39.180]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by tarsier.geekcn.org (Postfix) with ESMTP id 987F6EC1D10; Fri, 12 Oct 2007 15:38:02 +0800 (CST) DomainKey-Signature: a=rsa-sha1; s=default; d=delphij.net; c=nofws; q=dns; h=message-id:date:from:reply-to:organization:user-agent: mime-version:to:cc:subject:references:in-reply-to: x-enigmail-version:openpgp:content-type; b=q/G2wd7lpNDYgVZQEG5CAUoRYtp+sfg4bnEd70PuQSQ4+kyXSSMs+P7muKQ+vs/qH SzmybtvGbGcALxpMpKxsA== Message-ID: <470F244E.5090508@delphij.net> Date: Fri, 12 Oct 2007 00:37:50 -0700 From: LI Xin Organization: The FreeBSD Project User-Agent: Thunderbird 2.0.0.6 (Macintosh/20070728) MIME-Version: 1.0 To: supportsobaka@mail.ru References: <466670819.20071008134626@mail.ru> <470A5D94.3040304@delphij.net> <561442888.20071009230057@mail.ru> <470BD317.1020209@delphij.net> <708336321.20071011112428@mail.ru> In-Reply-To: <708336321.20071011112428@mail.ru> X-Enigmail-Version: 0.95.3 OpenPGP: url=http://www.delphij.net/delphij.asc Content-Type: multipart/signed; micalg=pgp-sha512; protocol="application/pgp-signature"; boundary="------------enig241503764C0D22636B760ECE" Cc: freebsd-scsi@freebsd.org, LI Xin , John Baldwin Subject: Re: LSI SAS 1064E in FreeBSD 6.2 X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: d@delphij.net List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 12 Oct 2007 07:38:10 -0000 This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --------------enig241503764C0D22636B760ECE Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable supportsobaka@mail.ru wrote: > Hello >=20 > >> ... >>> LSI Logic **AS1064**, LSI Logic AS1068 >>> .... >=20 > LX> No, this is just because the documentation lagging behind code chan= ge, > LX> but the code is there so it should work. >=20 > LX> The support was MFC'ed at: Thu Jun 8 17:47:35 2006 UTC (16 months a= go) > LX> by mjacob. >=20 > LX> Therefore, if it does not work, could you please let us know (prefe= rably > LX> with pciconf -lv output if you could, so we will be able to figure = out > LX> what's happening) so we can fix it? >=20 >=20 > It is impossible even start system now. It stops before HDD's > initialization, after: >=20 > Timecounters tick every 1.000 msec > ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disab= led, default to accept, logging limited to 100 packets/entry by default >=20 > Boot from CD not helped too :( > We will try today something else... >=20 > Is any idea from you, how to boot system on this machine with LSI > SAS 1064E controller? This sounds like an interrupt related problem. Which motherboard do you use? Cheers, --=20 Xin LI http://www.delphij.net/ FreeBSD - The Power to Serve! --------------enig241503764C0D22636B760ECE Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHDyROOfuToMruuMARCqCWAJ0dLdd/W+Nn2mmnh2Horo+dMVzmOQCfVKSw o6VEnmAcQyyyZ117gqQtokk= =2njF -----END PGP SIGNATURE----- --------------enig241503764C0D22636B760ECE-- From owner-freebsd-scsi@FreeBSD.ORG Fri Oct 12 09:26:58 2007 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 78B8D16A419 for ; Fri, 12 Oct 2007 09:26:58 +0000 (UTC) (envelope-from supportsobaka@mail.ru) Received: from mx30.mail.ru (mx30.mail.ru [194.67.23.238]) by mx1.freebsd.org (Postfix) with ESMTP id 27E7C13C455 for ; Fri, 12 Oct 2007 09:26:57 +0000 (UTC) (envelope-from supportsobaka@mail.ru) Received: from [212.176.204.213] (port=57653 helo=A) by mx30.mail.ru with asmtp id 1IgGnI-0004i3-00 for freebsd-scsi@freebsd.org; Fri, 12 Oct 2007 13:26:56 +0400 Date: Fri, 12 Oct 2007 13:26:56 +0400 From: supportsobaka@mail.ru X-Mailer: The Bat! (v3.85.03) Professional Organization: supportsobaka@mail.ru X-Priority: 3 (Normal) Message-ID: <905896076.20071012132656@mail.ru> To: freebsd-scsi@freebsd.org In-Reply-To: <470F244E.5090508@delphij.net> References: <466670819.20071008134626@mail.ru> <470A5D94.3040304@delphij.net> <561442888.20071009230057@mail.ru> <470BD317.1020209@delphij.net> <708336321.20071011112428@mail.ru> <470F244E.5090508@delphij.net> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Subject: Re[2]: LSI SAS 1064E in FreeBSD 6.2 X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: supportsobaka@mail.ru List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 12 Oct 2007 09:26:58 -0000 Hello, LI. LX> This sounds like an interrupt related problem. Which motherboard do you LX> use? LX> Cheers, Talk about serious decision - Intel's Blade. Chassis SBCE and blades SBXD132. We think that problem not in controller, but in IBM's front panel module (media bay), which FreeBSD recognize as umass. We will try today compile kernel without umass and start system from HDD. -- Oleg From owner-freebsd-scsi@FreeBSD.ORG Sat Oct 13 13:22:39 2007 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 0F8C316A480 for ; Sat, 13 Oct 2007 13:22:39 +0000 (UTC) (envelope-from supportsobaka@mail.ru) Received: from mx3.mail.ru (mx3.mail.ru [194.67.23.149]) by mx1.freebsd.org (Postfix) with ESMTP id 8C35113C459 for ; Sat, 13 Oct 2007 13:22:38 +0000 (UTC) (envelope-from supportsobaka@mail.ru) Received: from [212.176.204.213] (port=19081 helo=A) by mx3.mail.ru with asmtp id 1Iggwu-000Dzr-00; Sat, 13 Oct 2007 17:22:36 +0400 Date: Sat, 13 Oct 2007 17:22:33 +0400 From: supportsobaka@mail.ru X-Mailer: The Bat! (v3.85.03) Professional Organization: supportsobaka@mail.ru X-Priority: 3 (Normal) Message-ID: <1341254202.20071013172233@mail.ru> To: LI Xin In-Reply-To: <470BD317.1020209@delphij.net> References: <466670819.20071008134626@mail.ru> <470A5D94.3040304@delphij.net> <561442888.20071009230057@mail.ru> <470BD317.1020209@delphij.net> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Cc: freebsd-scsi@freebsd.org Subject: Re[2]: LSI SAS 1064E in FreeBSD 6.2 X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: supportsobaka@mail.ru List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 13 Oct 2007 13:22:39 -0000 Hello LX> The support was MFC'ed at: Thu Jun 8 17:47:35 2006 UTC (16 months ago) LX> by mjacob. LX> Therefore, if it does not work, could you please let us know (preferably LX> with pciconf -lv output if you could, so we will be able to figure out LX> what's happening) so we can fix it? We did as described here http://lists.freebsd.org/pipermail/freebsd-scsi/2007-October/003206.html and system was started on FreeBSD 6.2-release p8 But some problem still present. ============ dmesg ============ ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to accept, logging limited to 100 packets/entry by default (probe0:mpt0:0:0:1): error 22 (probe0:mpt0:0:0:1): Unretryable Error (probe0:mpt0:0:0:2): error 22 (probe0:mpt0:0:0:2): Unretryable Error (probe0:mpt0:0:0:3): error 22 (probe0:mpt0:0:0:3): Unretryable Error (probe0:mpt0:0:0:4): error 22 (probe0:mpt0:0:0:4): Unretryable Error (probe0:mpt0:0:0:5): error 22 (probe0:mpt0:0:0:5): Unretryable Error (probe0:mpt0:0:0:6): error 22 (probe0:mpt0:0:0:6): Unretryable Error (probe0:mpt0:0:0:7): error 22 (probe0:mpt0:0:0:7): Unretryable Error pass0 at mpt0 bus 0 target 0 lun 0 pass0: Fixed Direct Access SCSI-5 device pass0: Serial Number K101T782CAEA pass0: 300.000MB/s transfers, Tagged Queueing Enabled pass1 at mpt0 bus 0 target 1 lun 0 pass1: Fixed Direct Access SCSI-3 device pass1: Serial Number B361P6900JVB pass1: 300.000MB/s transfers, Tagged Queueing Enabled da0 at mpt0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-5 device da0: Serial Number K101T782CAEA da0: 300.000MB/s transfers, Tagged Queueing Enabled da0: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C) da1 at mpt0 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-3 device da1: Serial Number B361P6900JVB da1: 300.000MB/s transfers, Tagged Queueing Enabled da1: 70136MB (143638992 512 byte sectors: 255H 63S/T 8941C) GEOM: new disk da0 GEOM: new disk da1 ATA PseudoRAID loaded SMP: AP CPU #1 Launched! ============== pciconf -lv ============= hostb0@pci0:0:0: class=0x060000 card=0x80868086 chip=0x25d88086 rev=0xb1 hdr=0x00 vendor = 'Intel Corporation' class = bridge subclass = HOST-PCI pcib1@pci0:2:0: class=0x060400 card=0x00000050 chip=0x25f78086 rev=0xb1 hdr=0x01 vendor = 'Intel Corporation' class = bridge subclass = PCI-PCI pcib6@pci0:3:0: class=0x060400 card=0x00000050 chip=0x25e38086 rev=0xb1 hdr=0x01 vendor = 'Intel Corporation' class = bridge subclass = PCI-PCI pcib7@pci0:4:0: class=0x060400 card=0x00000050 chip=0x25e48086 rev=0xb1 hdr=0x01 vendor = 'Intel Corporation' class = bridge subclass = PCI-PCI pcib8@pci0:5:0: class=0x060400 card=0x00000050 chip=0x25e58086 rev=0xb1 hdr=0x01 vendor = 'Intel Corporation' class = bridge subclass = PCI-PCI pcib9@pci0:6:0: class=0x060400 card=0x00000050 chip=0x25e68086 rev=0xb1 hdr=0x01 vendor = 'Intel Corporation' class = bridge subclass = PCI-PCI pcib11@pci0:7:0: class=0x060400 card=0x00000050 chip=0x25e78086 rev=0xb1 hdr=0x01 vendor = 'Intel Corporation' class = bridge subclass = PCI-PCI hostb1@pci0:16:0: class=0x060000 card=0x02dd1014 chip=0x25f08086 rev=0xb1 hdr=0x00 vendor = 'Intel Corporation' class = bridge subclass = HOST-PCI hostb2@pci0:16:1: class=0x060000 card=0x80868086 chip=0x25f08086 rev=0xb1 hdr=0x00 vendor = 'Intel Corporation' class = bridge subclass = HOST-PCI hostb3@pci0:16:2: class=0x060000 card=0x80868086 chip=0x25f08086 rev=0xb1 hdr=0x00 vendor = 'Intel Corporation' class = bridge subclass = HOST-PCI hostb4@pci0:17:0: class=0x060000 card=0x80868086 chip=0x25f18086 rev=0xb1 hdr=0x00 vendor = 'Intel Corporation' class = bridge subclass = HOST-PCI hostb5@pci0:19:0: class=0x060000 card=0x80868086 chip=0x25f38086 rev=0xb1 hdr=0x00 vendor = 'Intel Corporation' class = bridge subclass = HOST-PCI hostb6@pci0:21:0: class=0x060000 card=0x80868086 chip=0x25f58086 rev=0xb1 hdr=0x00 vendor = 'Intel Corporation' class = bridge subclass = HOST-PCI hostb7@pci0:22:0: class=0x060000 card=0x80868086 chip=0x25f68086 rev=0xb1 hdr=0x00 vendor = 'Intel Corporation' class = bridge subclass = HOST-PCI pcib13@pci0:28:0: class=0x060400 card=0x00000040 chip=0x26908086 rev=0x09 hdr=0x01 vendor = 'Intel Corporation' class = bridge subclass = PCI-PCI uhci0@pci0:29:0: class=0x0c0300 card=0x02dd1014 chip=0x26888086 rev=0x09 hdr=0x00 vendor = 'Intel Corporation' class = serial bus subclass = USB uhci1@pci0:29:1: class=0x0c0300 card=0x02dd1014 chip=0x26898086 rev=0x09 hdr=0x00 vendor = 'Intel Corporation' class = serial bus subclass = USB uhci2@pci0:29:2: class=0x0c0300 card=0x02dd1014 chip=0x268a8086 rev=0x09 hdr=0x00 vendor = 'Intel Corporation' class = serial bus subclass = USB ehci0@pci0:29:7: class=0x0c0320 card=0x02dd1014 chip=0x268c8086 rev=0x09 hdr=0x00 vendor = 'Intel Corporation' class = serial bus subclass = USB pcib14@pci0:30:0: class=0x060401 card=0x00000050 chip=0x244e8086 rev=0xd9 hdr=0x01 vendor = 'Intel Corporation' device = '82801BA/CA/DB/DBL/EB/ER/FB (ICH2/3/4/4/5/5/6), 6300ESB Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI isab0@pci0:31:0: class=0x060100 card=0x00000000 chip=0x26708086 rev=0x09 hdr=0x00 vendor = 'Intel Corporation' class = bridge subclass = PCI-ISA atapci0@pci0:31:2: class=0x010180 card=0x02dd1014 chip=0x26808086 rev=0x09 hdr=0x00 vendor = 'Intel Corporation' class = mass storage subclass = ATA pcib2@pci7:0:0: class=0x060400 card=0x00000044 chip=0x35008086 rev=0x01 hdr=0x01 vendor = 'Intel Corporation' class = bridge subclass = PCI-PCI pcib5@pci7:0:3: class=0x060400 card=0x00000044 chip=0x350c8086 rev=0x01 hdr=0x01 vendor = 'Intel Corporation' class = bridge subclass = PCI-PCI pcib3@pci9:0:0: class=0x060400 card=0x00000044 chip=0x35108086 rev=0x01 hdr=0x01 vendor = 'Intel Corporation' class = bridge subclass = PCI-PCI pcib4@pci9:1:0: class=0x060400 card=0x00000044 chip=0x35148086 rev=0x01 hdr=0x01 vendor = 'Intel Corporation' class = bridge subclass = PCI-PCI pcib10@pci3:0:0: class=0x060400 card=0x00000060 chip=0x01031166 rev=0xc3 hdr=0x01 vendor = 'ServerWorks (Was: Reliance Computer Corp)' class = bridge subclass = PCI-PCI none0@pci4:0:0: class=0x020000 card=0x03271014 chip=0x16ac14e4 rev=0x12 hdr=0x00 vendor = 'Broadcom Corporation' class = network subclass = ethernet pcib12@pci5:0:0: class=0x060400 card=0x00000060 chip=0x01031166 rev=0xc3 hdr=0x01 vendor = 'ServerWorks (Was: Reliance Computer Corp)' class = bridge subclass = PCI-PCI none1@pci6:0:0: class=0x020000 card=0x03271014 chip=0x16ac14e4 rev=0x12 hdr=0x00 vendor = 'Broadcom Corporation' class = network subclass = ethernet mpt0@pci2:0:0: class=0x010000 card=0x03061014 chip=0x00561000 rev=0x02 hdr=0x00 vendor = 'LSI Logic (Was: Symbios Logic, NCR)' class = mass storage subclass = SCSI none2@pci1:1:0: class=0x030000 card=0x03051014 chip=0x515e1002 rev=0x02 hdr=0x00 vendor = 'ATI Technologies Inc' class = display subclass = VGA ============= -- Oleg From owner-freebsd-scsi@FreeBSD.ORG Sat Oct 13 14:30:16 2007 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id C309C16A419 for ; Sat, 13 Oct 2007 14:30:16 +0000 (UTC) (envelope-from scottl@samsco.org) Received: from pooker.samsco.org (pooker.samsco.org [168.103.85.57]) by mx1.freebsd.org (Postfix) with ESMTP id AA20013C458 for ; Sat, 13 Oct 2007 14:30:15 +0000 (UTC) (envelope-from scottl@samsco.org) Received: from phobos.samsco.home (phobos.samsco.home [192.168.254.11]) (authenticated bits=0) by pooker.samsco.org (8.13.8/8.13.8) with ESMTP id l9DETs8l054022; Sat, 13 Oct 2007 08:29:55 -0600 (MDT) (envelope-from scottl@samsco.org) Message-ID: <4710D646.6030400@samsco.org> Date: Sat, 13 Oct 2007 08:29:26 -0600 From: Scott Long User-Agent: Mozilla/5.0 (Macintosh; U; Intel Mac OS X; en-US; rv:1.8.1.6) Gecko/20070802 SeaMonkey/1.1.4 MIME-Version: 1.0 To: supportsobaka@mail.ru References: <466670819.20071008134626@mail.ru> <470A5D94.3040304@delphij.net> <561442888.20071009230057@mail.ru> <470BD317.1020209@delphij.net> <1341254202.20071013172233@mail.ru> In-Reply-To: <1341254202.20071013172233@mail.ru> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Greylist: Sender succeeded SMTP AUTH authentication, not delayed by milter-greylist-2.0.2 (pooker.samsco.org [168.103.85.57]); Sat, 13 Oct 2007 08:29:55 -0600 (MDT) X-Spam-Status: No, score=-1.4 required=5.5 tests=ALL_TRUSTED autolearn=failed version=3.1.8 X-Spam-Checker-Version: SpamAssassin 3.1.8 (2007-02-13) on pooker.samsco.org Cc: freebsd-scsi@freebsd.org Subject: Re: LSI SAS 1064E in FreeBSD 6.2 X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 13 Oct 2007 14:30:16 -0000 supportsobaka@mail.ru wrote: > Hello > > > LX> The support was MFC'ed at: Thu Jun 8 17:47:35 2006 UTC (16 months ago) > LX> by mjacob. > > LX> Therefore, if it does not work, could you please let us know (preferably > LX> with pciconf -lv output if you could, so we will be able to figure out > LX> what's happening) so we can fix it? > > We did as described here > http://lists.freebsd.org/pipermail/freebsd-scsi/2007-October/003206.html and system was started on FreeBSD 6.2-release p8 > > But some problem still present. > What problems persist? Are you talking about the "Unretryable Error" messages, or something else? Scott From owner-freebsd-scsi@FreeBSD.ORG Sat Oct 13 16:25:58 2007 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 657B716A41A for ; Sat, 13 Oct 2007 16:25:58 +0000 (UTC) (envelope-from supportsobaka@mail.ru) Received: from mx27.mail.ru (mx27.mail.ru [194.67.23.23]) by mx1.freebsd.org (Postfix) with ESMTP id 1F79513C448 for ; Sat, 13 Oct 2007 16:25:57 +0000 (UTC) (envelope-from supportsobaka@mail.ru) Received: from [212.176.204.213] (port=5526 helo=A) by mx27.mail.ru with asmtp id 1IgjoJ-0001zQ-00; Sat, 13 Oct 2007 20:25:55 +0400 Date: Sat, 13 Oct 2007 20:25:55 +0400 From: supportsobaka@mail.ru X-Mailer: The Bat! (v3.85.03) Professional Organization: supportsobaka@mail.ru X-Priority: 3 (Normal) Message-ID: <17210495744.20071013202555@mail.ru> To: Scott Long In-Reply-To: <4710D646.6030400@samsco.org> References: <466670819.20071008134626@mail.ru> <470A5D94.3040304@delphij.net> <561442888.20071009230057@mail.ru> <470BD317.1020209@delphij.net> <1341254202.20071013172233@mail.ru> <4710D646.6030400@samsco.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Cc: freebsd-scsi@freebsd.org Subject: Re[2]: LSI SAS 1064E in FreeBSD 6.2 X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: supportsobaka@mail.ru List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 13 Oct 2007 16:25:58 -0000 Hello SL> supportsobaka@mail.ru wrote: >> Hello >> >> >> LX> The support was MFC'ed at: Thu Jun 8 17:47:35 2006 UTC (16 months ago) >> LX> by mjacob. >> >> LX> Therefore, if it does not work, could you please let us know (preferably >> LX> with pciconf -lv output if you could, so we will be able to figure out >> LX> what's happening) so we can fix it? >> >> We did as described here >> http://lists.freebsd.org/pipermail/freebsd-scsi/2007-October/003206.html and system was started on FreeBSD 6.2-release p8 >> >> But some problem still present. >> SL> What problems persist? Are you talking about the "Unretryable Error" SL> messages, or something else? Yes, first about "Unretryable Error", and second - "none0 at pci4:0:0:" for Broadcom Ethernet. Forgot to say that "if_bce.ko" driver loaded. NIC - BMC5708S NetXtreme II Gigabit Ethernet -- Oleg From owner-freebsd-scsi@FreeBSD.ORG Sat Oct 13 22:52:04 2007 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id CFE2C16A41B for ; Sat, 13 Oct 2007 22:52:04 +0000 (UTC) (envelope-from scottl@samsco.org) Received: from pooker.samsco.org (pooker.samsco.org [168.103.85.57]) by mx1.freebsd.org (Postfix) with ESMTP id 7EA4C13C46E for ; Sat, 13 Oct 2007 22:52:04 +0000 (UTC) (envelope-from scottl@samsco.org) Received: from phobos.samsco.home (phobos.samsco.home [192.168.254.11]) (authenticated bits=0) by pooker.samsco.org (8.13.8/8.13.8) with ESMTP id l9DMppZP056065; Sat, 13 Oct 2007 16:51:51 -0600 (MDT) (envelope-from scottl@samsco.org) Message-ID: <47114BE9.9070509@samsco.org> Date: Sat, 13 Oct 2007 16:51:21 -0600 From: Scott Long User-Agent: Mozilla/5.0 (Macintosh; U; Intel Mac OS X; en-US; rv:1.8.1.6) Gecko/20070802 SeaMonkey/1.1.4 MIME-Version: 1.0 To: supportsobaka@mail.ru References: <466670819.20071008134626@mail.ru> <470A5D94.3040304@delphij.net> <561442888.20071009230057@mail.ru> <470BD317.1020209@delphij.net> <1341254202.20071013172233@mail.ru> <4710D646.6030400@samsco.org> <17210495744.20071013202555@mail.ru> In-Reply-To: <17210495744.20071013202555@mail.ru> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Greylist: Sender succeeded SMTP AUTH authentication, not delayed by milter-greylist-2.0.2 (pooker.samsco.org [168.103.85.57]); Sat, 13 Oct 2007 16:51:52 -0600 (MDT) X-Spam-Status: No, score=-1.4 required=5.5 tests=ALL_TRUSTED autolearn=failed version=3.1.8 X-Spam-Checker-Version: SpamAssassin 3.1.8 (2007-02-13) on pooker.samsco.org Cc: freebsd-scsi@freebsd.org Subject: Re: LSI SAS 1064E in FreeBSD 6.2 X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 13 Oct 2007 22:52:04 -0000 supportsobaka@mail.ru wrote: > Hello > > SL> supportsobaka@mail.ru wrote: >>> Hello >>> >>> >>> LX> The support was MFC'ed at: Thu Jun 8 17:47:35 2006 UTC (16 months ago) >>> LX> by mjacob. >>> >>> LX> Therefore, if it does not work, could you please let us know (preferably >>> LX> with pciconf -lv output if you could, so we will be able to figure out >>> LX> what's happening) so we can fix it? >>> >>> We did as described here >>> http://lists.freebsd.org/pipermail/freebsd-scsi/2007-October/003206.html and system was started on FreeBSD 6.2-release p8 >>> >>> But some problem still present. >>> > > SL> What problems persist? Are you talking about the "Unretryable Error" > SL> messages, or something else? > > > Yes, first about "Unretryable Error", This error is harmless and can be ignored. It looks like disk devices did indeed show up, yes? > and second - "none0 at > pci4:0:0:" for Broadcom Ethernet. Doug White might be able to help you here. It might be as simple as just a missing PCI ID in the driver. Scott