From owner-freebsd-wireless@freebsd.org Mon Dec 28 17:17:21 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 49BFBA53BFF for ; Mon, 28 Dec 2015 17:17:21 +0000 (UTC) (envelope-from bugzilla-noreply@FreeBSD.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 287BB1C3A for ; Mon, 28 Dec 2015 17:17:21 +0000 (UTC) (envelope-from bugzilla-noreply@FreeBSD.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id tBSHHDCM000173 for ; Mon, 28 Dec 2015 17:17:21 GMT (envelope-from bugzilla-noreply@FreeBSD.org) Message-Id: <201512281717.tBSHHDCM000173@kenobi.freebsd.org> From: bugzilla-noreply@FreeBSD.org To: freebsd-wireless@FreeBSD.org Subject: Problem reports for freebsd-wireless@FreeBSD.org that need special attention Date: Mon, 28 Dec 2015 17:17:21 +0000 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 28 Dec 2015 17:17:21 -0000 To view an individual PR, use: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=(Bug Id). The following is a listing of current problems submitted by FreeBSD users, which need special attention. These represent problem reports covering all versions including experimental development code and obsolete releases. Status | Bug Id | Description ------------+-----------+--------------------------------------------------- Open | 154598 | [ath] Atheros 5424/2424 can't connect to WPA netw Open | 163312 | [panic] [ath] kernel panic: page fault with ath0 Open | 166190 | [ath] TX hangs and frames stuck in TX queue Open | 166357 | [ath] 802.11n TX stall when the first frame in th Open | 169362 | [ath] AR5416: radar pulse PHY errors sometimes in 5 problems total for which you should take action. From owner-freebsd-wireless@freebsd.org Tue Dec 29 09:33:54 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 378C4A548C9; Tue, 29 Dec 2015 09:33:54 +0000 (UTC) (envelope-from vbotka@gmail.com) Received: from mail-wm0-x244.google.com (mail-wm0-x244.google.com [IPv6:2a00:1450:400c:c09::244]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id C99B91272; Tue, 29 Dec 2015 09:33:53 +0000 (UTC) (envelope-from vbotka@gmail.com) Received: by mail-wm0-x244.google.com with SMTP id l65so31271497wmf.3; Tue, 29 Dec 2015 01:33:53 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=date:from:to:cc:subject:message-id:in-reply-to:references :organization:mime-version:content-type; bh=fuoEvXBdRerkC+LyCzuMg6wGbODKBgm89LzoyqRPam0=; b=Ka1HSDsk0HcKlz62t6WO0SUvvzhruAQWdiUOzZDWx15ZIoIzbca+JSBBOXxjwVpChj acKVqXh0qdLREPab7iTzLl/SPlO5pwPqeJ1CK1eDZn15buFzUT0fWAS2yCx0FnvnG/hH Jf7mV/3V9kdXtZhFkXgWMef6ZmOwhmiz2ra2TSEezcE/zkFlwAeOS/HWq8cfstKH5FWp JaogZPpt8fy5iSW0CZiPfZl2WucmQ0yLUG9U4FzB6wEoXcnB1wzmop9cRBsg2ZmqNZjz fYR35BfwB2nVoLFmMNOXlOcRc/Pk8l2kKhTLkttQyHp9d57r9ovbaKfiLLp3UzzLlmMe UQVg== X-Received: by 10.194.120.134 with SMTP id lc6mr72298114wjb.130.1451381632149; Tue, 29 Dec 2015 01:33:52 -0800 (PST) Received: from planb.netng.org (ip-89-176-92-35.net.upcbroadband.cz. [89.176.92.35]) by smtp.gmail.com with ESMTPSA id pn6sm60317143wjb.15.2015.12.29.01.33.50 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Tue, 29 Dec 2015 01:33:50 -0800 (PST) Date: Tue, 29 Dec 2015 10:33:48 +0100 From: Vladimir Botka To: freebsd-wireless@FreeBSD.org Cc: freebsd-arm@freebsd.org, freebsd-current@FreeBSD.org Subject: Re: D-link wireless not detected Message-ID: <20151229103348.29c9469c@planb.netng.org> In-Reply-To: <1BA8A509-38E0-4975-BD66-95D934D9E055@cs.huji.ac.il> References: <1BA8A509-38E0-4975-BD66-95D934D9E055@cs.huji.ac.il> Organization: na X-Mailer: Claws Mail 3.12.0 (GTK+ 2.24.28; i686-pc-linux-gnu) MIME-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; boundary="Sig_/DIbs5Y2xeDqwY7/bk3y2DOC"; protocol="application/pgp-signature" X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 29 Dec 2015 09:33:54 -0000 --Sig_/DIbs5Y2xeDqwY7/bk3y2DOC Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Hi Danny, On Tue, 29 Dec 2015 11:16:27 +0200 Daniel Braniss wrote: > Hi All, > I have a working tp-link usb (realtek), but can=E2=80=99t get a d-link(al= so realtek) to work. > usbconfig: > ugen0.4: at usbus0, cfg=3D0 md=3DH= OST spd=3DHIGH (480Mbps) pwr=3DON (500mA) > This is on a raspberry pi running a resent current. > cheers & season greetings, > danny I've added freebsd-wireless list. My 2 cents. It might be helpful to see more details about the adapters. For example: # usbconfig -u 0 -a 7 dump_device_desc ugen0.7: <802.11 n WLAN Ralink> at usbus0, cfg=3D0 md=3DHOST spd=3DHIGH (480Mbps) pwr=3DON (450mA) bLength =3D 0x0012=20 bDescriptorType =3D 0x0001=20 bcdUSB =3D 0x0200=20 bDeviceClass =3D 0x0000 bDeviceSubClass =3D 0x0000=20 bDeviceProtocol =3D 0x0000=20 bMaxPacketSize0 =3D 0x0040=20 idVendor =3D 0x148f=20 idProduct =3D 0x5370=20 bcdDevice =3D 0x0101=20 iManufacturer =3D 0x0001 iProduct =3D 0x0002 <802.11 n WLAN> iSerialNumber =3D 0x0003 <1.0> bNumConfigurations =3D 0x0001 Cheers, -vlado --Sig_/DIbs5Y2xeDqwY7/bk3y2DOC Content-Type: application/pgp-signature Content-Description: OpenPGP digital signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAEBAgAGBQJWglN9AAoJEJDRmRKO1E8BH7wH/1AOUWiO0SHr5UhcXAdz1v19 IWqdpKzPcKvdBaL78wQNKHj/jPBWQtBNw4soSd9dSQ7+p2ujYrdI8T365ntAnDwi Xfw9xPaQlRmy8GZ2086ORv7DzggKssRdOW7mHMhxZDv0FDoSieoyszQ4ZsgKAnIk vQrJZzmLqqwlRh24Hb2WE9PkZQ1eRc8k8sYA6cyU6Bfqru0niJyz/03qjYoIjceK kHLmesIBly9jep47ldfHfMV9j9+fHEqIC+w55tgZOOHd2RpgW5mOumv4jJ3pTy8W 9rICqxLVP0DlgvKZ8hVk2e7GwryS5rKYCB9e1x/FPSqpMS6Gq5+3LH5VNMLCar4= =OICa -----END PGP SIGNATURE----- --Sig_/DIbs5Y2xeDqwY7/bk3y2DOC-- From owner-freebsd-wireless@freebsd.org Tue Dec 29 09:43:05 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id B9805A54E7C; Tue, 29 Dec 2015 09:43:05 +0000 (UTC) (envelope-from danny@cs.huji.ac.il) Received: from kabab.cs.huji.ac.il (kabab.cs.huji.ac.il [132.65.116.210]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 75E76103C; Tue, 29 Dec 2015 09:43:02 +0000 (UTC) (envelope-from danny@cs.huji.ac.il) Received: from chamsa.cs.huji.ac.il ([132.65.80.19]) by kabab.cs.huji.ac.il with esmtp id 1aDqnz-000PiY-Vx; Tue, 29 Dec 2015 11:43:00 +0200 Content-Type: text/plain; charset=utf-8 Mime-Version: 1.0 (Mac OS X Mail 8.2 \(2104\)) Subject: Re: D-link wireless not detected From: Daniel Braniss In-Reply-To: <20151229103348.29c9469c@planb.netng.org> Date: Tue, 29 Dec 2015 11:42:59 +0200 Cc: freebsd-wireless@FreeBSD.org, freebsd-arm@freebsd.org, freebsd-current@FreeBSD.org Content-Transfer-Encoding: quoted-printable Message-Id: <382E50DE-7B65-4469-9851-8F28A335096C@cs.huji.ac.il> References: <1BA8A509-38E0-4975-BD66-95D934D9E055@cs.huji.ac.il> <20151229103348.29c9469c@planb.netng.org> To: Vladimir Botka X-Mailer: Apple Mail (2.2104) X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 29 Dec 2015 09:43:05 -0000 > On 29 Dec 2015, at 11:33, Vladimir Botka wrote: >=20 > Hi Danny, >=20 > On Tue, 29 Dec 2015 11:16:27 +0200 > Daniel Braniss wrote: >> Hi All, >> I have a working tp-link usb (realtek), but can=E2=80=99t get a = d-link(also realtek) to work. >> usbconfig: >> ugen0.4: at usbus0, cfg=3D0 = md=3DHOST spd=3DHIGH (480Mbps) pwr=3DON (500mA) >> This is on a raspberry pi running a resent current. >> cheers & season greetings, >> danny >=20 > I've added freebsd-wireless list. >=20 > My 2 cents. It might be helpful to see more details about the = adapters. > For example: >=20 > # usbconfig -u 0 -a 7 dump_device_desc > ugen0.7: <802.11 n WLAN Ralink> at usbus0, cfg=3D0 md=3DHOST spd=3DHIGH > (480Mbps) pwr=3DON (450mA) > bLength =3D 0x0012=20 > bDescriptorType =3D 0x0001=20 > bcdUSB =3D 0x0200=20 > bDeviceClass =3D 0x0000 > bDeviceSubClass =3D 0x0000=20 > bDeviceProtocol =3D 0x0000=20 > bMaxPacketSize0 =3D 0x0040=20 > idVendor =3D 0x148f=20 > idProduct =3D 0x5370=20 > bcdDevice =3D 0x0101=20 > iManufacturer =3D 0x0001 > iProduct =3D 0x0002 <802.11 n WLAN> > iSerialNumber =3D 0x0003 <1.0> > bNumConfigurations =3D 0x0001 so here it is: root@:~ # usbconfig -u 0 -a 4 dump_device_desc ugen0.4: at usbus0, cfg=3D0 = md=3DHOST spd=3DHIGH (480Mbps) pwr=3DON (500mA) bLength =3D 0x0012=20 bDescriptorType =3D 0x0001=20 bcdUSB =3D 0x0210=20 bDeviceClass =3D 0x0000 bDeviceSubClass =3D 0x0000=20 bDeviceProtocol =3D 0x0000=20 bMaxPacketSize0 =3D 0x0040=20 idVendor =3D 0x2001=20 idProduct =3D 0x3319=20 bcdDevice =3D 0x0200=20 iManufacturer =3D 0x0001 iProduct =3D 0x0002 iSerialNumber =3D 0x0003 <00e04c000001> bNumConfigurations =3D 0x0001=20 thanks, danny From owner-freebsd-wireless@freebsd.org Tue Dec 29 09:51:12 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id B8A16A550FE; Tue, 29 Dec 2015 09:51:12 +0000 (UTC) (envelope-from hps@selasky.org) Received: from mail.turbocat.net (mail.turbocat.net [IPv6:2a01:4f8:d16:4514::2]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 8513F1500; Tue, 29 Dec 2015 09:51:12 +0000 (UTC) (envelope-from hps@selasky.org) Received: from laptop015.home.selasky.org (unknown [62.141.129.119]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by mail.turbocat.net (Postfix) with ESMTPSA id 326D11FE024; Tue, 29 Dec 2015 10:51:10 +0100 (CET) Subject: Re: D-link wireless not detected To: Daniel Braniss , Vladimir Botka References: <1BA8A509-38E0-4975-BD66-95D934D9E055@cs.huji.ac.il> <20151229103348.29c9469c@planb.netng.org> <382E50DE-7B65-4469-9851-8F28A335096C@cs.huji.ac.il> Cc: freebsd-arm@freebsd.org, freebsd-wireless@FreeBSD.org, freebsd-current@FreeBSD.org From: Hans Petter Selasky Message-ID: <5682580B.30107@selasky.org> Date: Tue, 29 Dec 2015 10:53:15 +0100 User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:38.0) Gecko/20100101 Thunderbird/38.4.0 MIME-Version: 1.0 In-Reply-To: <382E50DE-7B65-4469-9851-8F28A335096C@cs.huji.ac.il> Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 8bit X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 29 Dec 2015 09:51:12 -0000 On 12/29/15 10:42, Daniel Braniss wrote: > >> On 29 Dec 2015, at 11:33, Vladimir Botka wrote: >> >> Hi Danny, >> >> On Tue, 29 Dec 2015 11:16:27 +0200 >> Daniel Braniss wrote: >>> Hi All, >>> I have a working tp-link usb (realtek), but can’t get a d-link(also realtek) to work. >>> usbconfig: >>> ugen0.4: at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA) >>> This is on a raspberry pi running a resent current. >>> cheers & season greetings, >>> danny >> >> I've added freebsd-wireless list. >> >> My 2 cents. It might be helpful to see more details about the adapters. >> For example: >> >> # usbconfig -u 0 -a 7 dump_device_desc >> ugen0.7: <802.11 n WLAN Ralink> at usbus0, cfg=0 md=HOST spd=HIGH >> (480Mbps) pwr=ON (450mA) >> bLength = 0x0012 >> bDescriptorType = 0x0001 >> bcdUSB = 0x0200 >> bDeviceClass = 0x0000 >> bDeviceSubClass = 0x0000 >> bDeviceProtocol = 0x0000 >> bMaxPacketSize0 = 0x0040 >> idVendor = 0x148f >> idProduct = 0x5370 >> bcdDevice = 0x0101 >> iManufacturer = 0x0001 >> iProduct = 0x0002 <802.11 n WLAN> >> iSerialNumber = 0x0003 <1.0> >> bNumConfigurations = 0x0001 > > > so here it is: > root@:~ # usbconfig -u 0 -a 4 dump_device_desc > ugen0.4: at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA) > > bLength = 0x0012 > bDescriptorType = 0x0001 > bcdUSB = 0x0210 > bDeviceClass = 0x0000 > bDeviceSubClass = 0x0000 > bDeviceProtocol = 0x0000 > bMaxPacketSize0 = 0x0040 > idVendor = 0x2001 > idProduct = 0x3319 > bcdDevice = 0x0200 > iManufacturer = 0x0001 > iProduct = 0x0002 > iSerialNumber = 0x0003 <00e04c000001> > bNumConfigurations = 0x0001 > > thanks, > danny > Did you google the idVendor and idProduct values and see if Linux has a driver already? --HPS From owner-freebsd-wireless@freebsd.org Tue Dec 29 10:12:32 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id CDFC2A55815; Tue, 29 Dec 2015 10:12:32 +0000 (UTC) (envelope-from danny@cs.huji.ac.il) Received: from kabab.cs.huji.ac.il (kabab.cs.huji.ac.il [132.65.116.210]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 87720106B; Tue, 29 Dec 2015 10:12:32 +0000 (UTC) (envelope-from danny@cs.huji.ac.il) Received: from chamsa.cs.huji.ac.il ([132.65.80.19]) by kabab.cs.huji.ac.il with esmtp id 1aDrGU-0000Go-OB; Tue, 29 Dec 2015 12:12:26 +0200 Mime-Version: 1.0 (Mac OS X Mail 8.2 \(2104\)) Subject: Re: D-link wireless not detected From: Daniel Braniss In-Reply-To: <5682580B.30107@selasky.org> Date: Tue, 29 Dec 2015 12:12:26 +0200 Cc: Vladimir Botka , freebsd-arm@freebsd.org, freebsd-wireless@FreeBSD.org, freebsd-current@FreeBSD.org Message-Id: <346C6669-E51E-498F-8AD0-C294F70B441D@cs.huji.ac.il> References: <1BA8A509-38E0-4975-BD66-95D934D9E055@cs.huji.ac.il> <20151229103348.29c9469c@planb.netng.org> <382E50DE-7B65-4469-9851-8F28A335096C@cs.huji.ac.il> <5682580B.30107@selasky.org> To: Hans Petter Selasky X-Mailer: Apple Mail (2.2104) Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.20 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 29 Dec 2015 10:12:32 -0000 > On 29 Dec 2015, at 11:53, Hans Petter Selasky wrote: >=20 > On 12/29/15 10:42, Daniel Braniss wrote: >>=20 >>> On 29 Dec 2015, at 11:33, Vladimir Botka wrote: >>>=20 >>> Hi Danny, >>>=20 >>> On Tue, 29 Dec 2015 11:16:27 +0200 >>> Daniel Braniss wrote: >>>> Hi All, >>>> I have a working tp-link usb (realtek), but can=E2=80=99t get a = d-link(also realtek) to work. >>>> usbconfig: >>>> ugen0.4: at usbus0, cfg=3D0 = md=3DHOST spd=3DHIGH (480Mbps) pwr=3DON (500mA) >>>> This is on a raspberry pi running a resent current. >>>> cheers & season greetings, >>>> danny >>>=20 >>> I've added freebsd-wireless list. >>>=20 >>> My 2 cents. It might be helpful to see more details about the = adapters. >>> For example: >>>=20 >>> # usbconfig -u 0 -a 7 dump_device_desc >>> ugen0.7: <802.11 n WLAN Ralink> at usbus0, cfg=3D0 md=3DHOST = spd=3DHIGH >>> (480Mbps) pwr=3DON (450mA) >>> bLength =3D 0x0012 >>> bDescriptorType =3D 0x0001 >>> bcdUSB =3D 0x0200 >>> bDeviceClass =3D 0x0000 >>> bDeviceSubClass =3D 0x0000 >>> bDeviceProtocol =3D 0x0000 >>> bMaxPacketSize0 =3D 0x0040 >>> idVendor =3D 0x148f >>> idProduct =3D 0x5370 >>> bcdDevice =3D 0x0101 >>> iManufacturer =3D 0x0001 >>> iProduct =3D 0x0002 <802.11 n WLAN> >>> iSerialNumber =3D 0x0003 <1.0> >>> bNumConfigurations =3D 0x0001 >>=20 >>=20 >> so here it is: >> root@:~ # usbconfig -u 0 -a 4 dump_device_desc >> ugen0.4: at usbus0, cfg=3D0 = md=3DHOST spd=3DHIGH (480Mbps) pwr=3DON (500mA) >>=20 >> bLength =3D 0x0012 >> bDescriptorType =3D 0x0001 >> bcdUSB =3D 0x0210 >> bDeviceClass =3D 0x0000 >> bDeviceSubClass =3D 0x0000 >> bDeviceProtocol =3D 0x0000 >> bMaxPacketSize0 =3D 0x0040 >> idVendor =3D 0x2001 >> idProduct =3D 0x3319 >> bcdDevice =3D 0x0200 >> iManufacturer =3D 0x0001 >> iProduct =3D 0x0002 >> iSerialNumber =3D 0x0003 <00e04c000001> >> bNumConfigurations =3D 0x0001 >>=20 >> thanks, >> danny >>=20 >=20 > Did you google the idVendor and idProduct values and see if Linux has = a driver already? >=20 > =E2=80=94HPS >=20 = https://github.com/Mange/rtl8192eu-linux-driver/blob/master/os_dep/linux/u= sb_intf.c = and look at line 216 danny From owner-freebsd-wireless@freebsd.org Tue Dec 29 10:18:42 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 4997BA559CC; Tue, 29 Dec 2015 10:18:42 +0000 (UTC) (envelope-from hps@selasky.org) Received: from mail.turbocat.net (heidi.turbocat.net [88.198.202.214]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 1230712BD; Tue, 29 Dec 2015 10:18:41 +0000 (UTC) (envelope-from hps@selasky.org) Received: from laptop015.home.selasky.org (unknown [62.141.129.119]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by mail.turbocat.net (Postfix) with ESMTPSA id D7EAE1FE024; Tue, 29 Dec 2015 11:18:31 +0100 (CET) Subject: Re: D-link wireless not detected To: Daniel Braniss References: <1BA8A509-38E0-4975-BD66-95D934D9E055@cs.huji.ac.il> <20151229103348.29c9469c@planb.netng.org> <382E50DE-7B65-4469-9851-8F28A335096C@cs.huji.ac.il> <5682580B.30107@selasky.org> <346C6669-E51E-498F-8AD0-C294F70B441D@cs.huji.ac.il> Cc: Vladimir Botka , freebsd-arm@freebsd.org, freebsd-wireless@FreeBSD.org, freebsd-current@FreeBSD.org From: Hans Petter Selasky Message-ID: <56825E74.3050609@selasky.org> Date: Tue, 29 Dec 2015 11:20:36 +0100 User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:38.0) Gecko/20100101 Thunderbird/38.4.0 MIME-Version: 1.0 In-Reply-To: <346C6669-E51E-498F-8AD0-C294F70B441D@cs.huji.ac.il> Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 29 Dec 2015 10:18:42 -0000 On 12/29/15 11:12, Daniel Braniss wrote: > > https://github.com/Mange/rtl8192eu-linux-driver/blob/master/os_dep/linux/usb_intf.c > and look at line 216 > > danny Hi, You should be able to get this device working by adding a device entry to: src/sys/dev/usb/wlan/if_urtwn.c Can you make a patch and PR for this, and I'll submit upstream. I recommend you test using an 11-current kernel. --HPS From owner-freebsd-wireless@freebsd.org Tue Dec 29 12:26:28 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 439A1A530BC; Tue, 29 Dec 2015 12:26:28 +0000 (UTC) (envelope-from danny@cs.huji.ac.il) Received: from kabab.cs.huji.ac.il (kabab.cs.huji.ac.il [132.65.116.210]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id F24A01B06; Tue, 29 Dec 2015 12:26:27 +0000 (UTC) (envelope-from danny@cs.huji.ac.il) Received: from chamsa.cs.huji.ac.il ([132.65.80.19]) by kabab.cs.huji.ac.il with esmtp id 1aDtM4-0002Kx-Vx; Tue, 29 Dec 2015 14:26:21 +0200 Content-Type: text/plain; charset=utf-8 Mime-Version: 1.0 (Mac OS X Mail 8.2 \(2104\)) Subject: Re: D-link wireless not detected From: Daniel Braniss In-Reply-To: <56825E74.3050609@selasky.org> Date: Tue, 29 Dec 2015 14:26:20 +0200 Cc: Vladimir Botka , freebsd-arm@freebsd.org, freebsd-wireless@FreeBSD.org, freebsd-current@FreeBSD.org Content-Transfer-Encoding: quoted-printable Message-Id: <1EC3E6CB-5031-46F3-A3AD-329DB1FDC882@cs.huji.ac.il> References: <1BA8A509-38E0-4975-BD66-95D934D9E055@cs.huji.ac.il> <20151229103348.29c9469c@planb.netng.org> <382E50DE-7B65-4469-9851-8F28A335096C@cs.huji.ac.il> <5682580B.30107@selasky.org> <346C6669-E51E-498F-8AD0-C294F70B441D@cs.huji.ac.il> <56825E74.3050609@selasky.org> To: Hans Petter Selasky X-Mailer: Apple Mail (2.2104) X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 29 Dec 2015 12:26:28 -0000 > On 29 Dec 2015, at 12:20, Hans Petter Selasky wrote: >=20 > On 12/29/15 11:12, Daniel Braniss wrote: >>=20 >> = https://github.com/Mange/rtl8192eu-linux-driver/blob/master/os_dep/linux/u= sb_intf.c = >> and look at line 216 >>=20 >> danny >=20 > Hi, >=20 > You should be able to get this device working by adding a device entry = to: >=20 > src/sys/dev/usb/wlan/if_urtwn.c >=20 > Can you make a patch and PR for this, and I'll submit upstream. I = recommend you test using an 11-current kernel. >=20 > --HPS clearly, I=E2=80=99m missing something, because it=E2=80=99s not working = :-( the only visible change is now ugen0.4: <802.11n WLAN Adapter RealtekWireless N Nano USB A> at usbus0, = cfg=3D0 md=3DHOST spd=3DHIGH (480Mbps) pwr=3DON (500mA) before it was ugen0.4: at usbus0, cfg=3D0 = md=3DHOST spd=3DHIGH (480Mbps) pwr=3DON (500mA) rnd> svn diff Index: usbdevs =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D --- usbdevs (revision 291745) +++ usbdevs (working copy) @@ -1657,6 +1657,7 @@ product DLINK2 RTL8192SU_1 0x3300 RTL8192SU product DLINK2 RTL8192SU_2 0x3302 RTL8192SU product DLINK2 DWA131A1 0x3303 DWA-131 A1 +product DLINK DWA131 0x3319 DWA-131 product DLINK2 DWA160A2 0x3a09 DWA-160 A2 product DLINK2 DWA120 0x3a0c DWA-120 product DLINK2 DWA120_NF 0x3a0d DWA-120 (no firmware) Index: wlan/if_urtwn.c =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D --- wlan/if_urtwn.c (revision 291745) +++ wlan/if_urtwn.c (working copy) @@ -116,6 +116,7 @@ URTWN_DEV(DLINK, RTL8192CU_2), URTWN_DEV(DLINK, RTL8192CU_3), URTWN_DEV(DLINK, DWA131B), + URTWN_DEV(DLINK, DWA131), // danny URTWN_DEV(EDIMAX, EW7811UN), URTWN_DEV(EDIMAX, RTL8192CU), URTWN_DEV(FEIXUN, RTL8188CU), From owner-freebsd-wireless@freebsd.org Tue Dec 29 12:29:02 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 80577A531F9; Tue, 29 Dec 2015 12:29:02 +0000 (UTC) (envelope-from hps@selasky.org) Received: from mail.turbocat.net (mail.turbocat.net [IPv6:2a01:4f8:d16:4514::2]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 4988B1D2F; Tue, 29 Dec 2015 12:29:02 +0000 (UTC) (envelope-from hps@selasky.org) Received: from laptop015.home.selasky.org (unknown [62.141.129.119]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by mail.turbocat.net (Postfix) with ESMTPSA id 646871FE024; Tue, 29 Dec 2015 13:28:59 +0100 (CET) Subject: Re: D-link wireless not detected To: Daniel Braniss References: <1BA8A509-38E0-4975-BD66-95D934D9E055@cs.huji.ac.il> <20151229103348.29c9469c@planb.netng.org> <382E50DE-7B65-4469-9851-8F28A335096C@cs.huji.ac.il> <5682580B.30107@selasky.org> <346C6669-E51E-498F-8AD0-C294F70B441D@cs.huji.ac.il> <56825E74.3050609@selasky.org> <1EC3E6CB-5031-46F3-A3AD-329DB1FDC882@cs.huji.ac.il> Cc: Vladimir Botka , freebsd-arm@freebsd.org, freebsd-wireless@FreeBSD.org, freebsd-current@FreeBSD.org From: Hans Petter Selasky Message-ID: <56827D08.2070602@selasky.org> Date: Tue, 29 Dec 2015 13:31:04 +0100 User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:38.0) Gecko/20100101 Thunderbird/38.4.0 MIME-Version: 1.0 In-Reply-To: <1EC3E6CB-5031-46F3-A3AD-329DB1FDC882@cs.huji.ac.il> Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 8bit X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 29 Dec 2015 12:29:02 -0000 On 12/29/15 13:26, Daniel Braniss wrote: > >> On 29 Dec 2015, at 12:20, Hans Petter Selasky wrote: >> >> On 12/29/15 11:12, Daniel Braniss wrote: >>> >>> https://github.com/Mange/rtl8192eu-linux-driver/blob/master/os_dep/linux/usb_intf.c >>> and look at line 216 >>> >>> danny >> >> Hi, >> >> You should be able to get this device working by adding a device entry to: >> >> src/sys/dev/usb/wlan/if_urtwn.c >> >> Can you make a patch and PR for this, and I'll submit upstream. I recommend you test using an 11-current kernel. >> >> --HPS > > clearly, I’m missing something, because it’s not working :-( > the only visible change is now > ugen0.4: <802.11n WLAN Adapter RealtekWireless N Nano USB A> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA) > before it was > ugen0.4: at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA) > > rnd> svn diff > Index: usbdevs > =================================================================== > --- usbdevs (revision 291745) > +++ usbdevs (working copy) > @@ -1657,6 +1657,7 @@ > product DLINK2 RTL8192SU_1 0x3300 RTL8192SU > product DLINK2 RTL8192SU_2 0x3302 RTL8192SU > product DLINK2 DWA131A1 0x3303 DWA-131 A1 > +product DLINK DWA131 0x3319 DWA-131 > product DLINK2 DWA160A2 0x3a09 DWA-160 A2 > product DLINK2 DWA120 0x3a0c DWA-120 > product DLINK2 DWA120_NF 0x3a0d DWA-120 (no firmware) > Index: wlan/if_urtwn.c > =================================================================== > --- wlan/if_urtwn.c (revision 291745) > +++ wlan/if_urtwn.c (working copy) > @@ -116,6 +116,7 @@ > URTWN_DEV(DLINK, RTL8192CU_2), > URTWN_DEV(DLINK, RTL8192CU_3), > URTWN_DEV(DLINK, DWA131B), > + URTWN_DEV(DLINK, DWA131), // danny > URTWN_DEV(EDIMAX, EW7811UN), > URTWN_DEV(EDIMAX, RTL8192CU), > URTWN_DEV(FEIXUN, RTL8188CU), > Hi, You should use vendor RALINK (according to your usbconfig dump) vendor RALINK 0x148f Ralink Technology --HPS From owner-freebsd-wireless@freebsd.org Tue Dec 29 12:36:44 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id C3652A5380C; Tue, 29 Dec 2015 12:36:44 +0000 (UTC) (envelope-from danny@cs.huji.ac.il) Received: from kabab.cs.huji.ac.il (kabab.cs.huji.ac.il [132.65.116.210]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 50FC71566; Tue, 29 Dec 2015 12:36:44 +0000 (UTC) (envelope-from danny@cs.huji.ac.il) Received: from chamsa.cs.huji.ac.il ([132.65.80.19]) by kabab.cs.huji.ac.il with esmtp id 1aDtW3-0002Rf-5u; Tue, 29 Dec 2015 14:36:39 +0200 Mime-Version: 1.0 (Mac OS X Mail 8.2 \(2104\)) Subject: Re: D-link wireless not detected From: Daniel Braniss In-Reply-To: <56827D08.2070602@selasky.org> Date: Tue, 29 Dec 2015 14:36:38 +0200 Cc: Vladimir Botka , freebsd-arm@freebsd.org, freebsd-wireless@FreeBSD.org, freebsd-current@FreeBSD.org Message-Id: References: <1BA8A509-38E0-4975-BD66-95D934D9E055@cs.huji.ac.il> <20151229103348.29c9469c@planb.netng.org> <382E50DE-7B65-4469-9851-8F28A335096C@cs.huji.ac.il> <5682580B.30107@selasky.org> <346C6669-E51E-498F-8AD0-C294F70B441D@cs.huji.ac.il> <56825E74.3050609@selasky.org> <1EC3E6CB-5031-46F3-A3AD-329DB1FDC882@cs.huji.ac.il> <56827D08.2070602@selasky.org> To: Hans Petter Selasky X-Mailer: Apple Mail (2.2104) Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.20 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 29 Dec 2015 12:36:44 -0000 > On 29 Dec 2015, at 14:31, Hans Petter Selasky wrote: >=20 > On 12/29/15 13:26, Daniel Braniss wrote: >>=20 >>> On 29 Dec 2015, at 12:20, Hans Petter Selasky = wrote: >>>=20 >>> On 12/29/15 11:12, Daniel Braniss wrote: >>>>=20 >>>> = https://github.com/Mange/rtl8192eu-linux-driver/blob/master/os_dep/linux/u= sb_intf.c = >>>> and look at line 216 >>>>=20 >>>> danny >>>=20 >>> Hi, >>>=20 >>> You should be able to get this device working by adding a device = entry to: >>>=20 >>> src/sys/dev/usb/wlan/if_urtwn.c >>>=20 >>> Can you make a patch and PR for this, and I'll submit upstream. I = recommend you test using an 11-current kernel. >>>=20 >>> --HPS >>=20 >> clearly, I=E2=80=99m missing something, because it=E2=80=99s not = working :-( >> the only visible change is now >> ugen0.4: <802.11n WLAN Adapter RealtekWireless N Nano USB A> at = usbus0, cfg=3D0 md=3DHOST spd=3DHIGH (480Mbps) pwr=3DON (500mA) >> before it was >> ugen0.4: at usbus0, cfg=3D0 = md=3DHOST spd=3DHIGH (480Mbps) pwr=3DON (500mA) >>=20 >> rnd> svn diff >> Index: usbdevs >> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D >> --- usbdevs (revision 291745) >> +++ usbdevs (working copy) >> @@ -1657,6 +1657,7 @@ >> product DLINK2 RTL8192SU_1 0x3300 RTL8192SU >> product DLINK2 RTL8192SU_2 0x3302 RTL8192SU >> product DLINK2 DWA131A1 0x3303 DWA-131 A1 >> +product DLINK DWA131 0x3319 DWA-131 >> product DLINK2 DWA160A2 0x3a09 DWA-160 A2 >> product DLINK2 DWA120 0x3a0c DWA-120 >> product DLINK2 DWA120_NF 0x3a0d DWA-120 (no firmware) >> Index: wlan/if_urtwn.c >> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D >> --- wlan/if_urtwn.c (revision 291745) >> +++ wlan/if_urtwn.c (working copy) >> @@ -116,6 +116,7 @@ >> URTWN_DEV(DLINK, RTL8192CU_2), >> URTWN_DEV(DLINK, RTL8192CU_3), >> URTWN_DEV(DLINK, DWA131B), >> + URTWN_DEV(DLINK, DWA131), // danny >> URTWN_DEV(EDIMAX, EW7811UN), >> URTWN_DEV(EDIMAX, RTL8192CU), >> URTWN_DEV(FEIXUN, RTL8188CU), >>=20 >=20 > Hi, >=20 > You should use vendor RALINK (according to your usbconfig dump) >=20 > vendor RALINK 0x148f Ralink Technology you are confusing Vladimir=E2=80=99s with mine. here is mine again: ugen0.4: at usbus0, cfg=3D0 = md=3DHOST spd=3DHIGH (480Mbps) pwr=3DON (500mA) bLength =3D 0x0012=20 bDescriptorType =3D 0x0001=20 bcdUSB =3D 0x0210=20 bDeviceClass =3D 0x0000 bDeviceSubClass =3D 0x0000=20 bDeviceProtocol =3D 0x0000=20 bMaxPacketSize0 =3D 0x0040=20 idVendor =3D 0x2001 <=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D D-LINK idProduct =3D 0x3319=20 bcdDevice =3D 0x0200=20 iManufacturer =3D 0x0001 iProduct =3D 0x0002 iSerialNumber =3D 0x0003 <00e04c000001> bNumConfigurations =3D 0x0001=20 danny From owner-freebsd-wireless@freebsd.org Tue Dec 29 12:42:09 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 4C28DA53B54; Tue, 29 Dec 2015 12:42:09 +0000 (UTC) (envelope-from hps@selasky.org) Received: from mail.turbocat.net (heidi.turbocat.net [88.198.202.214]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 13BBB1B92; Tue, 29 Dec 2015 12:42:08 +0000 (UTC) (envelope-from hps@selasky.org) Received: from laptop015.home.selasky.org (unknown [62.141.129.119]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by mail.turbocat.net (Postfix) with ESMTPSA id B99661FE024; Tue, 29 Dec 2015 13:42:06 +0100 (CET) Subject: Re: D-link wireless not detected To: Daniel Braniss References: <1BA8A509-38E0-4975-BD66-95D934D9E055@cs.huji.ac.il> <20151229103348.29c9469c@planb.netng.org> <382E50DE-7B65-4469-9851-8F28A335096C@cs.huji.ac.il> <5682580B.30107@selasky.org> <346C6669-E51E-498F-8AD0-C294F70B441D@cs.huji.ac.il> <56825E74.3050609@selasky.org> <1EC3E6CB-5031-46F3-A3AD-329DB1FDC882@cs.huji.ac.il> <56827D08.2070602@selasky.org> Cc: Vladimir Botka , freebsd-arm@freebsd.org, freebsd-wireless@FreeBSD.org, freebsd-current@FreeBSD.org From: Hans Petter Selasky Message-ID: <5682801B.6020404@selasky.org> Date: Tue, 29 Dec 2015 13:44:11 +0100 User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:38.0) Gecko/20100101 Thunderbird/38.4.0 MIME-Version: 1.0 In-Reply-To: Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 29 Dec 2015 12:42:09 -0000 On 12/29/15 13:36, Daniel Braniss wrote: > Until /etc/devd/usb.conf is regenerated, you'll need to manually load the kernel module for urtwn. Did you do that? --HPS From owner-freebsd-wireless@freebsd.org Tue Dec 29 13:00:52 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 7950EA54183; Tue, 29 Dec 2015 13:00:52 +0000 (UTC) (envelope-from danny@cs.huji.ac.il) Received: from kabab.cs.huji.ac.il (kabab.cs.huji.ac.il [132.65.116.210]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 328501334; Tue, 29 Dec 2015 13:00:51 +0000 (UTC) (envelope-from danny@cs.huji.ac.il) Received: from chamsa.cs.huji.ac.il ([132.65.80.19]) by kabab.cs.huji.ac.il with esmtp id 1aDttO-0003JH-AZ; Tue, 29 Dec 2015 15:00:46 +0200 Content-Type: text/plain; charset=utf-8 Mime-Version: 1.0 (Mac OS X Mail 8.2 \(2104\)) Subject: Re: D-link wireless not detected From: Daniel Braniss In-Reply-To: <5682801B.6020404@selasky.org> Date: Tue, 29 Dec 2015 15:00:45 +0200 Cc: Vladimir Botka , freebsd-arm@freebsd.org, freebsd-wireless@FreeBSD.org, freebsd-current@FreeBSD.org Content-Transfer-Encoding: quoted-printable Message-Id: References: <1BA8A509-38E0-4975-BD66-95D934D9E055@cs.huji.ac.il> <20151229103348.29c9469c@planb.netng.org> <382E50DE-7B65-4469-9851-8F28A335096C@cs.huji.ac.il> <5682580B.30107@selasky.org> <346C6669-E51E-498F-8AD0-C294F70B441D@cs.huji.ac.il> <56825E74.3050609@selasky.org> <1EC3E6CB-5031-46F3-A3AD-329DB1FDC882@cs.huji.ac.il> <56827D08.2070602@selasky.org> <5682801B.6020404@selasky.org> To: Hans Petter Selasky X-Mailer: Apple Mail (2.2104) X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 29 Dec 2015 13:00:52 -0000 > On 29 Dec 2015, at 14:44, Hans Petter Selasky wrote: >=20 > On 12/29/15 13:36, Daniel Braniss wrote: >>=20 >=20 > Until /etc/devd/usb.conf is regenerated, you'll need to manually load = the kernel module for urtwn. Did you do that? >=20 > --HPS >=20 ok, set if_urtwn_load=3Dyes and now I get: ugen0.4: at usbus0 urtwn0: on usbus0 urtwn0: could not allocate USB transfers, err=3DUSB_ERR_NO_PIPE Fatal kernel mode data abort: 'Translation Fault (L1)' on write trapframe: 0xda29fb88 FSR=3D00000805, FAR=3D00000000, spsr=3D60000013 r0 =3D00000000, r1 =3D00000000, r2 =3Dc0a72cb0, r3 =3D00000165 r4 =3Dc2cd0000, r5 =3Dc0a86650, r6 =3Dc2cd1a80, r7 =3D00000000 r8 =3Dc2cd1dd8, r9 =3Dc2cd1a20, r10=3Dc2a85dd0, r11=3Dda29fc20 r12=3D00000000, ssp=3Dda29fc18, slr=3D00000004, pc =3Dc0a3f7cc [ thread pid 13 tid 100045 ] Stopped at ieee80211_ifdetach+0x4c: str r0, [r1] db>=20 btw, as long as you are willing to help, I will keep testing, in other words, i=E2=80=99m ok. thanks, danny From owner-freebsd-wireless@freebsd.org Tue Dec 29 13:58:23 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 59EAAA55657; Tue, 29 Dec 2015 13:58:23 +0000 (UTC) (envelope-from kevlo@ns.kevlo.org) Received: from ns.kevlo.org (220-135-115-6.HINET-IP.hinet.net [220.135.115.6]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client CN "ns.kevlo.org", Issuer "ns.kevlo.org" (not verified)) by mx1.freebsd.org (Postfix) with ESMTPS id EB7C91E1C; Tue, 29 Dec 2015 13:58:22 +0000 (UTC) (envelope-from kevlo@ns.kevlo.org) Received: from ns.kevlo.org (localhost [127.0.0.1]) by ns.kevlo.org (8.14.9/8.14.9) with ESMTP id tBTDvHwO016004 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-GCM-SHA384 bits=256 verify=NO); Tue, 29 Dec 2015 21:57:18 +0800 (CST) (envelope-from kevlo@ns.kevlo.org) Received: (from kevlo@localhost) by ns.kevlo.org (8.14.9/8.14.9/Submit) id tBTDvFb7016003; Tue, 29 Dec 2015 21:57:15 +0800 (CST) (envelope-from kevlo) Date: Tue, 29 Dec 2015 21:57:15 +0800 From: Kevin Lo To: Daniel Braniss Cc: Hans Petter Selasky , freebsd-wireless@FreeBSD.org, freebsd-arm@freebsd.org, freebsd-current@FreeBSD.org Subject: Re: D-link wireless not detected Message-ID: <20151229135715.GA15933@ns.kevlo.org> References: <1BA8A509-38E0-4975-BD66-95D934D9E055@cs.huji.ac.il> <20151229103348.29c9469c@planb.netng.org> <382E50DE-7B65-4469-9851-8F28A335096C@cs.huji.ac.il> <5682580B.30107@selasky.org> <346C6669-E51E-498F-8AD0-C294F70B441D@cs.huji.ac.il> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <346C6669-E51E-498F-8AD0-C294F70B441D@cs.huji.ac.il> User-Agent: Mutt/1.5.23 (2014-03-12) X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 29 Dec 2015 13:58:23 -0000 On Tue, Dec 29, 2015 at 12:12:26PM +0200, Daniel Braniss wrote: > > > On 29 Dec 2015, at 11:53, Hans Petter Selasky wrote: > > > > On 12/29/15 10:42, Daniel Braniss wrote: > >> > >>> On 29 Dec 2015, at 11:33, Vladimir Botka wrote: > >>> > >>> Hi Danny, > >>> > >>> On Tue, 29 Dec 2015 11:16:27 +0200 > >>> Daniel Braniss wrote: > >>>> Hi All, > >>>> I have a working tp-link usb (realtek), but can’t get a d-link(also realtek) to work. > >>>> usbconfig: > >>>> ugen0.4: at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA) > >>>> This is on a raspberry pi running a resent current. > >>>> cheers & season greetings, > >>>> danny > >>> > >>> I've added freebsd-wireless list. > >>> > >>> My 2 cents. It might be helpful to see more details about the adapters. > >>> For example: > >>> > >>> # usbconfig -u 0 -a 7 dump_device_desc > >>> ugen0.7: <802.11 n WLAN Ralink> at usbus0, cfg=0 md=HOST spd=HIGH > >>> (480Mbps) pwr=ON (450mA) > >>> bLength = 0x0012 > >>> bDescriptorType = 0x0001 > >>> bcdUSB = 0x0200 > >>> bDeviceClass = 0x0000 > >>> bDeviceSubClass = 0x0000 > >>> bDeviceProtocol = 0x0000 > >>> bMaxPacketSize0 = 0x0040 > >>> idVendor = 0x148f > >>> idProduct = 0x5370 > >>> bcdDevice = 0x0101 > >>> iManufacturer = 0x0001 > >>> iProduct = 0x0002 <802.11 n WLAN> > >>> iSerialNumber = 0x0003 <1.0> > >>> bNumConfigurations = 0x0001 > >> > >> > >> so here it is: > >> root@:~ # usbconfig -u 0 -a 4 dump_device_desc > >> ugen0.4: at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA) > >> > >> bLength = 0x0012 > >> bDescriptorType = 0x0001 > >> bcdUSB = 0x0210 > >> bDeviceClass = 0x0000 > >> bDeviceSubClass = 0x0000 > >> bDeviceProtocol = 0x0000 > >> bMaxPacketSize0 = 0x0040 > >> idVendor = 0x2001 > >> idProduct = 0x3319 > >> bcdDevice = 0x0200 > >> iManufacturer = 0x0001 > >> iProduct = 0x0002 > >> iSerialNumber = 0x0003 <00e04c000001> > >> bNumConfigurations = 0x0001 > >> > >> thanks, > >> danny > >> > > > > Did you google the idVendor and idProduct values and see if Linux has a driver already? > > > > —HPS > > > > > https://github.com/Mange/rtl8192eu-linux-driver/blob/master/os_dep/linux/usb_intf.c > and look at line 216 Your device (D-Link DWA-131 rev E1) is rtl8192eu, which is not supported by FreeBSD. > danny Kevin From owner-freebsd-wireless@freebsd.org Tue Dec 29 14:00:33 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 40A09A55737; Tue, 29 Dec 2015 14:00:33 +0000 (UTC) (envelope-from hps@selasky.org) Received: from mail.turbocat.net (heidi.turbocat.net [88.198.202.214]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 03B941FC4; Tue, 29 Dec 2015 14:00:32 +0000 (UTC) (envelope-from hps@selasky.org) Received: from laptop015.home.selasky.org (unknown [62.141.129.119]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by mail.turbocat.net (Postfix) with ESMTPSA id 93E7D1FE024; Tue, 29 Dec 2015 15:00:30 +0100 (CET) Subject: Re: D-link wireless not detected To: Daniel Braniss References: <1BA8A509-38E0-4975-BD66-95D934D9E055@cs.huji.ac.il> <20151229103348.29c9469c@planb.netng.org> <382E50DE-7B65-4469-9851-8F28A335096C@cs.huji.ac.il> <5682580B.30107@selasky.org> <346C6669-E51E-498F-8AD0-C294F70B441D@cs.huji.ac.il> <56825E74.3050609@selasky.org> <1EC3E6CB-5031-46F3-A3AD-329DB1FDC882@cs.huji.ac.il> <56827D08.2070602@selasky.org> <5682801B.6020404@selasky.org> Cc: Vladimir Botka , freebsd-arm@freebsd.org, freebsd-wireless@FreeBSD.org, freebsd-current@FreeBSD.org, Andriy Voskoboinyk From: Hans Petter Selasky Message-ID: <5682927B.6020704@selasky.org> Date: Tue, 29 Dec 2015 15:02:35 +0100 User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:38.0) Gecko/20100101 Thunderbird/38.4.0 MIME-Version: 1.0 In-Reply-To: Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 8bit X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 29 Dec 2015 14:00:33 -0000 On 12/29/15 14:00, Daniel Braniss wrote: > >> On 29 Dec 2015, at 14:44, Hans Petter Selasky wrote: >> >> On 12/29/15 13:36, Daniel Braniss wrote: >>> >> >> Until /etc/devd/usb.conf is regenerated, you'll need to manually load the kernel module for urtwn. Did you do that? >> >> --HPS >> > ok, set if_urtwn_load=yes > and now I get: > > ugen0.4: at usbus0 > urtwn0: on usbus0 > urtwn0: could not allocate USB transfers, err=USB_ERR_NO_PIPE > Fatal kernel mode data abort: 'Translation Fault (L1)' on write > trapframe: 0xda29fb88 > FSR=00000805, FAR=00000000, spsr=60000013 > r0 =00000000, r1 =00000000, r2 =c0a72cb0, r3 =00000165 > r4 =c2cd0000, r5 =c0a86650, r6 =c2cd1a80, r7 =00000000 > r8 =c2cd1dd8, r9 =c2cd1a20, r10=c2a85dd0, r11=da29fc20 > r12=00000000, ssp=da29fc18, slr=00000004, pc =c0a3f7cc > > [ thread pid 13 tid 100045 ] > Stopped at ieee80211_ifdetach+0x4c: str r0, [r1] > db> > > btw, as long as you are willing to help, I will keep testing, > in other words, i’m ok. Hi Andriy, Can you fix the crash above and verify this error patch? Andriy: After: usbd_transfer_unsetup(sc->sc_xfer, URTWN_N_TRANSFER); There is no need for: usbd_transfer_drain(sc->sc_xfer[x]); --HPS From owner-freebsd-wireless@freebsd.org Tue Dec 29 14:05:01 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id BCFC9A559A4; Tue, 29 Dec 2015 14:05:01 +0000 (UTC) (envelope-from hps@selasky.org) Received: from mail.turbocat.net (heidi.turbocat.net [88.198.202.214]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 8337114C9; Tue, 29 Dec 2015 14:05:01 +0000 (UTC) (envelope-from hps@selasky.org) Received: from laptop015.home.selasky.org (unknown [62.141.129.119]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by mail.turbocat.net (Postfix) with ESMTPSA id 96D5A1FE024; Tue, 29 Dec 2015 15:04:59 +0100 (CET) Subject: Re: D-link wireless not detected To: Daniel Braniss References: <1BA8A509-38E0-4975-BD66-95D934D9E055@cs.huji.ac.il> <20151229103348.29c9469c@planb.netng.org> <382E50DE-7B65-4469-9851-8F28A335096C@cs.huji.ac.il> <5682580B.30107@selasky.org> <346C6669-E51E-498F-8AD0-C294F70B441D@cs.huji.ac.il> <56825E74.3050609@selasky.org> <1EC3E6CB-5031-46F3-A3AD-329DB1FDC882@cs.huji.ac.il> <56827D08.2070602@selasky.org> <5682801B.6020404@selasky.org> <5682927B.6020704@selasky.org> Cc: Andriy Voskoboinyk , freebsd-wireless@FreeBSD.org, freebsd-arm@freebsd.org, freebsd-current@FreeBSD.org From: Hans Petter Selasky Message-ID: <56829387.7080508@selasky.org> Date: Tue, 29 Dec 2015 15:07:03 +0100 User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:38.0) Gecko/20100101 Thunderbird/38.4.0 MIME-Version: 1.0 In-Reply-To: <5682927B.6020704@selasky.org> Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 8bit X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 29 Dec 2015 14:05:01 -0000 On 12/29/15 15:02, Hans Petter Selasky wrote: > On 12/29/15 14:00, Daniel Braniss wrote: >> >>> On 29 Dec 2015, at 14:44, Hans Petter Selasky wrote: >>> >>> On 12/29/15 13:36, Daniel Braniss wrote: >>>> >>> >>> Until /etc/devd/usb.conf is regenerated, you'll need to manually load >>> the kernel module for urtwn. Did you do that? >>> >>> --HPS >>> >> ok, set if_urtwn_load=yes >> and now I get: >> >> ugen0.4: at usbus0 >> urtwn0: on usbus0 >> urtwn0: could not allocate USB transfers, err=USB_ERR_NO_PIPE >> Fatal kernel mode data abort: 'Translation Fault (L1)' on write >> trapframe: 0xda29fb88 >> FSR=00000805, FAR=00000000, spsr=60000013 >> r0 =00000000, r1 =00000000, r2 =c0a72cb0, r3 =00000165 >> r4 =c2cd0000, r5 =c0a86650, r6 =c2cd1a80, r7 =00000000 >> r8 =c2cd1dd8, r9 =c2cd1a20, r10=c2a85dd0, r11=da29fc20 >> r12=00000000, ssp=da29fc18, slr=00000004, pc =c0a3f7cc >> >> [ thread pid 13 tid 100045 ] >> Stopped at ieee80211_ifdetach+0x4c: str r0, [r1] >> db> >> >> btw, as long as you are willing to help, I will keep testing, >> in other words, i’m ok. > > Hi Andriy, > > Can you fix the crash above and verify this error patch? > Hi, I see 11-current has a fix. Maybe MFC that to 10-stable? > Andriy: > > After: > usbd_transfer_unsetup(sc->sc_xfer, URTWN_N_TRANSFER); > There is no need for: > usbd_transfer_drain(sc->sc_xfer[x]); --HPS From owner-freebsd-wireless@freebsd.org Tue Dec 29 14:09:04 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id A24A5A55B1D; Tue, 29 Dec 2015 14:09:04 +0000 (UTC) (envelope-from koobs.freebsd@gmail.com) Received: from mail-pa0-x22d.google.com (mail-pa0-x22d.google.com [IPv6:2607:f8b0:400e:c03::22d]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 750211810; Tue, 29 Dec 2015 14:09:04 +0000 (UTC) (envelope-from koobs.freebsd@gmail.com) Received: by mail-pa0-x22d.google.com with SMTP id cy9so124803334pac.0; Tue, 29 Dec 2015 06:09:04 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=sender:reply-to:subject:references:to:cc:from:message-id:date :user-agent:mime-version:in-reply-to:content-type :content-transfer-encoding; bh=5180giaH4ELEqUUFFr45LJKGFdRYo7ro5LF0KCvNiQo=; b=dpaxFlNMoi/wzIbcEG7KA45V4ij1YrAtu+1YFN7O04Ln3r1wIs6K/nJRe8XzE6DAME EYzTbF+9sy/dzx18ZicBTE1xKpdcx7tj624R8X1o6WoPwpjCgSlVV6qN1pKnYNxSN1oe E87Rtk6nXtjXM4eakC73Lh9+StE73q2abZqCOm8EbtG10T24gP2SWVxqwLVkMTAOpy5i WUF2DkncViVEDUYH/brMEhVMFxbpWnC6y7ZwMKgdFfe4nNuYWO5n/hq77pYYEK34l78P Qy9Tj3o067y6VQlH1Mj08HPmElL748Yg5KsMON2pHqWrXNK8VLhxDtlj9dt4M51HeFC9 4Ztw== X-Received: by 10.66.222.101 with SMTP id ql5mr86597169pac.144.1451398144159; Tue, 29 Dec 2015 06:09:04 -0800 (PST) Received: from ?IPv6:2001:44b8:31ae:7b01:adf9:d5f0:d710:6dae? (2001-44b8-31ae-7b01-adf9-d5f0-d710-6dae.static.ipv6.internode.on.net. [2001:44b8:31ae:7b01:adf9:d5f0:d710:6dae]) by smtp.gmail.com with ESMTPSA id n64sm83680882pfi.19.2015.12.29.06.09.01 (version=TLSv1/SSLv3 cipher=OTHER); Tue, 29 Dec 2015 06:09:03 -0800 (PST) Sender: Kubilay Kocak Reply-To: koobs@FreeBSD.org Subject: Re: D-link wireless not detected References: <1BA8A509-38E0-4975-BD66-95D934D9E055@cs.huji.ac.il> <20151229103348.29c9469c@planb.netng.org> <382E50DE-7B65-4469-9851-8F28A335096C@cs.huji.ac.il> <5682580B.30107@selasky.org> <346C6669-E51E-498F-8AD0-C294F70B441D@cs.huji.ac.il> <56825E74.3050609@selasky.org> <1EC3E6CB-5031-46F3-A3AD-329DB1FDC882@cs.huji.ac.il> <56827D08.2070602@selasky.org> <5682801B.6020404@selasky.org> <5682927B.6020704@selasky.org> <56829387.7080508@selasky.org> To: Hans Petter Selasky , Daniel Braniss Cc: Andriy Voskoboinyk , freebsd-wireless@FreeBSD.org, freebsd-arm@freebsd.org, freebsd-current@FreeBSD.org From: Kubilay Kocak Message-ID: <568293F8.3040905@FreeBSD.org> Date: Wed, 30 Dec 2015 01:08:56 +1100 User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:42.0) Gecko/20100101 Thunderbird/42.0 MIME-Version: 1.0 In-Reply-To: <56829387.7080508@selasky.org> Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8bit X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 29 Dec 2015 14:09:04 -0000 On 30/12/2015 1:07 AM, Hans Petter Selasky wrote: > On 12/29/15 15:02, Hans Petter Selasky wrote: >> On 12/29/15 14:00, Daniel Braniss wrote: >>> >>>> On 29 Dec 2015, at 14:44, Hans Petter Selasky wrote: >>>> >>>> On 12/29/15 13:36, Daniel Braniss wrote: >>>>> >>>> >>>> Until /etc/devd/usb.conf is regenerated, you'll need to manually load >>>> the kernel module for urtwn. Did you do that? >>>> >>>> --HPS >>>> >>> ok, set if_urtwn_load=yes >>> and now I get: >>> >>> ugen0.4: at usbus0 >>> urtwn0: on usbus0 >>> urtwn0: could not allocate USB transfers, err=USB_ERR_NO_PIPE >>> Fatal kernel mode data abort: 'Translation Fault (L1)' on write >>> trapframe: 0xda29fb88 >>> FSR=00000805, FAR=00000000, spsr=60000013 >>> r0 =00000000, r1 =00000000, r2 =c0a72cb0, r3 =00000165 >>> r4 =c2cd0000, r5 =c0a86650, r6 =c2cd1a80, r7 =00000000 >>> r8 =c2cd1dd8, r9 =c2cd1a20, r10=c2a85dd0, r11=da29fc20 >>> r12=00000000, ssp=da29fc18, slr=00000004, pc =c0a3f7cc >>> >>> [ thread pid 13 tid 100045 ] >>> Stopped at ieee80211_ifdetach+0x4c: str r0, [r1] >>> db> >>> >>> btw, as long as you are willing to help, I will keep testing, >>> in other words, i’m ok. >> >> Hi Andriy, >> >> Can you fix the crash above and verify this error patch? >> > > Hi, > > I see 11-current has a fix. Maybe MFC that to 10-stable? Is there a Bugzilla issue ID for it? >> Andriy: >> >> After: >> usbd_transfer_unsetup(sc->sc_xfer, URTWN_N_TRANSFER); >> There is no need for: >> usbd_transfer_drain(sc->sc_xfer[x]); > > --HPS > From owner-freebsd-wireless@freebsd.org Tue Dec 29 14:14:19 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 69803A55D7A; Tue, 29 Dec 2015 14:14:19 +0000 (UTC) (envelope-from andriyvos@gmail.com) Received: from mail-lf0-f44.google.com (mail-lf0-f44.google.com [209.85.215.44]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id EF06C1D8C; Tue, 29 Dec 2015 14:14:18 +0000 (UTC) (envelope-from andriyvos@gmail.com) Received: by mail-lf0-f44.google.com with SMTP id y184so212604687lfc.1; Tue, 29 Dec 2015 06:14:18 -0800 (PST) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=content-type:to:subject:references:date:cc:mime-version :content-transfer-encoding:from:message-id:in-reply-to:user-agent; bh=sS0Us8C/fcishtPT0it8WGOESQsqutlk6Q3xQCCF6Ko=; b=hKOx9s16P0BxzafdzBnBj70v5WfN9XFutjpHKRyQ24b6nOXus9uf3kUkDV7HakFXAY ovskyAuJdNZLbJUuOLoaiftsJRRAZCBZWzO5d6r+A+4lTgxAoONV7YstddNe/8O6muOz chMk/FYGF3WwBGiMhtXouDjA/B3LjLVJfkNjmElEfMTs5ICtX0pCoSpgXK/zOSM0Mag5 qEQ1JAwpOk9hggHq7TJOOEmwHmr1MaIOT3kiV/uAEB48BK1BZcfI0QaFeazHiKZH229c 9h1jyvrlPnTdHfK+D/hCoAnmCEru9CF2X1I3BWV/8YnZL9b32MHVd/gXa9gjWsvkVQhx a+HQ== X-Received: by 10.25.91.139 with SMTP id p133mr610236lfb.108.1451398450602; Tue, 29 Dec 2015 06:14:10 -0800 (PST) Received: from localhost ([77.91.171.160]) by smtp.gmail.com with ESMTPSA id h8sm11047917lbd.5.2015.12.29.06.14.09 (version=TLS1 cipher=AES128-SHA bits=128/128); Tue, 29 Dec 2015 06:14:10 -0800 (PST) Content-Type: text/plain; charset=utf-8; format=flowed; delsp=yes To: "Kubilay Kocak" Subject: Re: D-link wireless not detected References: <1BA8A509-38E0-4975-BD66-95D934D9E055@cs.huji.ac.il> <20151229103348.29c9469c@planb.netng.org> <382E50DE-7B65-4469-9851-8F28A335096C@cs.huji.ac.il> <5682580B.30107@selasky.org> <346C6669-E51E-498F-8AD0-C294F70B441D@cs.huji.ac.il> <56825E74.3050609@selasky.org> <1EC3E6CB-5031-46F3-A3AD-329DB1FDC882@cs.huji.ac.il> <56827D08.2070602@selasky.org> <5682801B.6020404@selasky.org> <5682927B.6020704@selasky.org> <56829387.7080508@selasky.org> <568293F8.3040905@FreeBSD.org> Date: Tue, 29 Dec 2015 16:14:08 +0200 Cc: "Hans Petter Selasky" , "Daniel Braniss" , "freebsd-wireless@freebsd.org" , freebsd-arm@freebsd.org, freebsd-current@freebsd.org MIME-Version: 1.0 Content-Transfer-Encoding: Quoted-Printable From: "Andriy Voskoboinyk" Message-ID: In-Reply-To: <568293F8.3040905@FreeBSD.org> User-Agent: Opera Mail/12.16 (FreeBSD) X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 29 Dec 2015 14:14:19 -0000 Tue, 29 Dec 2015 16:08:56 +0200 =D0=B1=D1=83=D0=BB=D0=BE =D0=BD=D0=B0=D0= =BF=D0=B8=D1=81=D0=B0=D0=BD=D0=BE Kubilay Kocak = : > On 30/12/2015 1:07 AM, Hans Petter Selasky wrote: >> On 12/29/15 15:02, Hans Petter Selasky wrote: >>> On 12/29/15 14:00, Daniel Braniss wrote: >>>> >>>>> On 29 Dec 2015, at 14:44, Hans Petter Selasky = >>>>> wrote: >>>>> >>>>> On 12/29/15 13:36, Daniel Braniss wrote: >>>>>> >>>>> >>>>> Until /etc/devd/usb.conf is regenerated, you'll need to manually l= oad >>>>> the kernel module for urtwn. Did you do that? >>>>> >>>>> --HPS >>>>> >>>> ok, set if_urtwn_load=3Dyes >>>> and now I get: >>>> >>>> ugen0.4: at usbus0 >>>> urtwn0: on usbus0 >>>> urtwn0: could not allocate USB transfers, err=3DUSB_ERR_NO_PIPE >>>> Fatal kernel mode data abort: 'Translation Fault (L1)' on write >>>> trapframe: 0xda29fb88 >>>> FSR=3D00000805, FAR=3D00000000, spsr=3D60000013 >>>> r0 =3D00000000, r1 =3D00000000, r2 =3Dc0a72cb0, r3 =3D00000165 >>>> r4 =3Dc2cd0000, r5 =3Dc0a86650, r6 =3Dc2cd1a80, r7 =3D00000000 >>>> r8 =3Dc2cd1dd8, r9 =3Dc2cd1a20, r10=3Dc2a85dd0, r11=3Dda29fc20 >>>> r12=3D00000000, ssp=3Dda29fc18, slr=3D00000004, pc =3Dc0a3f7cc >>>> >>>> [ thread pid 13 tid 100045 ] >>>> Stopped at ieee80211_ifdetach+0x4c: str r0, [r1] >>>> db> >>>> >>>> btw, as long as you are willing to help, I will keep testing, >>>> in other words, i=E2=80=99m ok. >>> >>> Hi Andriy, >>> >>> Can you fix the crash above and verify this error patch? >>> >> >> Hi, >> >> I see 11-current has a fix. Maybe MFC that to 10-stable? > > Is there a Bugzilla issue ID for it? No, it was fixed in r292174 (as a part of = https://reviews.freebsd.org/D4447) > >>> Andriy: >>> >>> After: >>> usbd_transfer_unsetup(sc->sc_xfer, URTWN_N_TRANSFER); >>> There is no need for: >>> usbd_transfer_drain(sc->sc_xfer[x]); >> >> --HPS >> > > _______________________________________________ > freebsd-wireless@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to = > "freebsd-wireless-unsubscribe@freebsd.org" From owner-freebsd-wireless@freebsd.org Tue Dec 29 14:20:25 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id E29FAA55FFF; Tue, 29 Dec 2015 14:20:25 +0000 (UTC) (envelope-from kevlo@ns.kevlo.org) Received: from ns.kevlo.org (220-135-115-6.HINET-IP.hinet.net [220.135.115.6]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client CN "ns.kevlo.org", Issuer "ns.kevlo.org" (not verified)) by mx1.freebsd.org (Postfix) with ESMTPS id 85E34115B; Tue, 29 Dec 2015 14:20:25 +0000 (UTC) (envelope-from kevlo@ns.kevlo.org) Received: from ns.kevlo.org (localhost [127.0.0.1]) by ns.kevlo.org (8.14.9/8.14.9) with ESMTP id tBTEJgDx016182 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-GCM-SHA384 bits=256 verify=NO); Tue, 29 Dec 2015 22:19:42 +0800 (CST) (envelope-from kevlo@ns.kevlo.org) Received: (from kevlo@localhost) by ns.kevlo.org (8.14.9/8.14.9/Submit) id tBTEJfh4016181; Tue, 29 Dec 2015 22:19:41 +0800 (CST) (envelope-from kevlo) Date: Tue, 29 Dec 2015 22:19:40 +0800 From: Kevin Lo To: Hans Petter Selasky Cc: Daniel Braniss , freebsd-wireless@FreeBSD.org, freebsd-arm@freebsd.org, freebsd-current@FreeBSD.org Subject: Re: D-link wireless not detected Message-ID: <20151229141940.GA16117@ns.kevlo.org> References: <382E50DE-7B65-4469-9851-8F28A335096C@cs.huji.ac.il> <5682580B.30107@selasky.org> <346C6669-E51E-498F-8AD0-C294F70B441D@cs.huji.ac.il> <56825E74.3050609@selasky.org> <1EC3E6CB-5031-46F3-A3AD-329DB1FDC882@cs.huji.ac.il> <56827D08.2070602@selasky.org> <5682801B.6020404@selasky.org> <5682927B.6020704@selasky.org> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <5682927B.6020704@selasky.org> User-Agent: Mutt/1.5.23 (2014-03-12) X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 29 Dec 2015 14:20:26 -0000 On Tue, Dec 29, 2015 at 03:02:35PM +0100, Hans Petter Selasky wrote: > On 12/29/15 14:00, Daniel Braniss wrote: > > > >> On 29 Dec 2015, at 14:44, Hans Petter Selasky wrote: > >> > >> On 12/29/15 13:36, Daniel Braniss wrote: > >>> > >> > >> Until /etc/devd/usb.conf is regenerated, you'll need to manually load the kernel module for urtwn. Did you do that? > >> > >> --HPS > >> > > ok, set if_urtwn_load=yes > > and now I get: > > > > ugen0.4: at usbus0 > > urtwn0: on usbus0 > > urtwn0: could not allocate USB transfers, err=USB_ERR_NO_PIPE > > Fatal kernel mode data abort: 'Translation Fault (L1)' on write > > trapframe: 0xda29fb88 > > FSR=00000805, FAR=00000000, spsr=60000013 > > r0 =00000000, r1 =00000000, r2 =c0a72cb0, r3 =00000165 > > r4 =c2cd0000, r5 =c0a86650, r6 =c2cd1a80, r7 =00000000 > > r8 =c2cd1dd8, r9 =c2cd1a20, r10=c2a85dd0, r11=da29fc20 > > r12=00000000, ssp=da29fc18, slr=00000004, pc =c0a3f7cc > > > > [ thread pid 13 tid 100045 ] > > Stopped at ieee80211_ifdetach+0x4c: str r0, [r1] > > db> > > > > btw, as long as you are willing to help, I will keep testing, > > in other words, i’m ok. > > Hi Andriy, > > Can you fix the crash above and verify this error patch? > > Andriy: > > After: > usbd_transfer_unsetup(sc->sc_xfer, URTWN_N_TRANSFER); > There is no need for: > usbd_transfer_drain(sc->sc_xfer[x]); As I mentioned previously we don't support rtl8192eu. One difference between those is the the number of endpoints and its addresses. > --HPS From owner-freebsd-wireless@freebsd.org Tue Dec 29 17:42:13 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id B7ABAA55B40; Tue, 29 Dec 2015 17:42:13 +0000 (UTC) (envelope-from adrian.chadd@gmail.com) Received: from mail-ig0-x229.google.com (mail-ig0-x229.google.com [IPv6:2607:f8b0:4001:c05::229]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client CN "smtp.gmail.com", Issuer "Google Internet Authority G2" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 83D3B1D97; Tue, 29 Dec 2015 17:42:13 +0000 (UTC) (envelope-from adrian.chadd@gmail.com) Received: by mail-ig0-x229.google.com with SMTP id to4so165919278igc.0; Tue, 29 Dec 2015 09:42:13 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type:content-transfer-encoding; bh=ewfdmgcCvVzj8ej0KyiWR9pCxg9HG80tlC7Z7r76Vjo=; b=zKxrF/9vRbeBI2lTTsfIYYEM5TRhEu6s5DKP3QUugH8psN/cuFi0sDJD8jRRweVAKv Grovm1CGjVvy0mR3/PS+rMYW+JAY9Ncmlnu5asGrALZ93Eh8ebdMnSLAiN8W5kcgFr8U WQHE42RlCqn5m5+MQjD7FADYScrA0vBCTDUWgdebKkX8zrD0/ArynqLsH8cRrDYaDkKx 8ySFIhL7vqay9YmIroEvA7vznINaAISpx2Fn5o3qnAKVJG/OrdkB08no147lacVlsC9a JMqI6pHVV+arfq+a71GnY58nXE0PeGYflEV7ebnRzHnGchkhAU7c91GzRY5IOYIWiLOz AYrQ== MIME-Version: 1.0 X-Received: by 10.50.50.238 with SMTP id f14mr7380028igo.37.1451410932912; Tue, 29 Dec 2015 09:42:12 -0800 (PST) Received: by 10.36.121.202 with HTTP; Tue, 29 Dec 2015 09:42:12 -0800 (PST) In-Reply-To: <20151229141940.GA16117@ns.kevlo.org> References: <382E50DE-7B65-4469-9851-8F28A335096C@cs.huji.ac.il> <5682580B.30107@selasky.org> <346C6669-E51E-498F-8AD0-C294F70B441D@cs.huji.ac.il> <56825E74.3050609@selasky.org> <1EC3E6CB-5031-46F3-A3AD-329DB1FDC882@cs.huji.ac.il> <56827D08.2070602@selasky.org> <5682801B.6020404@selasky.org> <5682927B.6020704@selasky.org> <20151229141940.GA16117@ns.kevlo.org> Date: Tue, 29 Dec 2015 09:42:12 -0800 Message-ID: Subject: Re: D-link wireless not detected From: Adrian Chadd To: Kevin Lo Cc: Hans Petter Selasky , "freebsd-arm@freebsd.org" , "freebsd-wireless@freebsd.org" , freebsd-current Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 29 Dec 2015 17:42:13 -0000 I'll go order one and take a crack at it soon. (I saw this when looking at the r92su and realtek linux drivers - they do a whole bunch of extra endpoint gymnastics that we don't..) -a On 29 December 2015 at 06:19, Kevin Lo wrote: > On Tue, Dec 29, 2015 at 03:02:35PM +0100, Hans Petter Selasky wrote: >> On 12/29/15 14:00, Daniel Braniss wrote: >> > >> >> On 29 Dec 2015, at 14:44, Hans Petter Selasky wrote= : >> >> >> >> On 12/29/15 13:36, Daniel Braniss wrote: >> >>> >> >> >> >> Until /etc/devd/usb.conf is regenerated, you'll need to manually load= the kernel module for urtwn. Did you do that? >> >> >> >> --HPS >> >> >> > ok, set if_urtwn_load=3Dyes >> > and now I get: >> > >> > ugen0.4: at usbus0 >> > urtwn0: on usbus0 >> > urtwn0: could not allocate USB transfers, err=3DUSB_ERR_NO_PIPE >> > Fatal kernel mode data abort: 'Translation Fault (L1)' on write >> > trapframe: 0xda29fb88 >> > FSR=3D00000805, FAR=3D00000000, spsr=3D60000013 >> > r0 =3D00000000, r1 =3D00000000, r2 =3Dc0a72cb0, r3 =3D00000165 >> > r4 =3Dc2cd0000, r5 =3Dc0a86650, r6 =3Dc2cd1a80, r7 =3D00000000 >> > r8 =3Dc2cd1dd8, r9 =3Dc2cd1a20, r10=3Dc2a85dd0, r11=3Dda29fc20 >> > r12=3D00000000, ssp=3Dda29fc18, slr=3D00000004, pc =3Dc0a3f7cc >> > >> > [ thread pid 13 tid 100045 ] >> > Stopped at ieee80211_ifdetach+0x4c: str r0, [r1] >> > db> >> > >> > btw, as long as you are willing to help, I will keep testing, >> > in other words, i=E2=80=99m ok. >> >> Hi Andriy, >> >> Can you fix the crash above and verify this error patch? >> >> Andriy: >> >> After: >> usbd_transfer_unsetup(sc->sc_xfer, URTWN_N_TRANSFER); >> There is no need for: >> usbd_transfer_drain(sc->sc_xfer[x]); > > As I mentioned previously we don't support rtl8192eu. One difference > between those is the the number of endpoints and its addresses. > >> --HPS > _______________________________________________ > freebsd-arm@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" From owner-freebsd-wireless@freebsd.org Wed Dec 30 06:55:16 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id E715EA53745; Wed, 30 Dec 2015 06:55:15 +0000 (UTC) (envelope-from danny@cs.huji.ac.il) Received: from kabab.cs.huji.ac.il (kabab.cs.huji.ac.il [132.65.116.210]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 9DA721C80; Wed, 30 Dec 2015 06:55:15 +0000 (UTC) (envelope-from danny@cs.huji.ac.il) Received: from chamsa.cs.huji.ac.il ([132.65.80.19]) by kabab.cs.huji.ac.il with esmtp id 1aEAf5-000I9b-0i; Wed, 30 Dec 2015 08:55:07 +0200 Content-Type: text/plain; charset=utf-8 Mime-Version: 1.0 (Mac OS X Mail 8.2 \(2104\)) Subject: Re: D-link wireless not detected From: Daniel Braniss In-Reply-To: Date: Wed, 30 Dec 2015 08:55:06 +0200 Cc: Kevin Lo , "freebsd-arm@freebsd.org" , "freebsd-wireless@freebsd.org" , Hans Petter Selasky , freebsd-current Content-Transfer-Encoding: quoted-printable Message-Id: References: <382E50DE-7B65-4469-9851-8F28A335096C@cs.huji.ac.il> <5682580B.30107@selasky.org> <346C6669-E51E-498F-8AD0-C294F70B441D@cs.huji.ac.il> <56825E74.3050609@selasky.org> <1EC3E6CB-5031-46F3-A3AD-329DB1FDC882@cs.huji.ac.il> <56827D08.2070602@selasky.org> <5682801B.6020404@selasky.org> <5682927B.6020704@selasky.org> <20151229141940.GA16117@ns.kevlo.org> To: Adrian Chadd X-Mailer: Apple Mail (2.2104) X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 30 Dec 2015 06:55:16 -0000 > On 29 Dec 2015, at 19:42, Adrian Chadd wrote: >=20 > I'll go order one and take a crack at it soon. >=20 > (I saw this when looking at the r92su and realtek linux drivers - they > do a whole bunch of extra endpoint gymnastics that we don't..) great, let me know, and I can help out debugging. danny >=20 >=20 > -a >=20 >=20 > On 29 December 2015 at 06:19, Kevin Lo wrote: >> On Tue, Dec 29, 2015 at 03:02:35PM +0100, Hans Petter Selasky wrote: >>> On 12/29/15 14:00, Daniel Braniss wrote: >>>>=20 >>>>> On 29 Dec 2015, at 14:44, Hans Petter Selasky = wrote: >>>>>=20 >>>>> On 12/29/15 13:36, Daniel Braniss wrote: >>>>>>=20 >>>>>=20 >>>>> Until /etc/devd/usb.conf is regenerated, you'll need to manually = load the kernel module for urtwn. Did you do that? >>>>>=20 >>>>> --HPS >>>>>=20 >>>> ok, set if_urtwn_load=3Dyes >>>> and now I get: >>>>=20 >>>> ugen0.4: at usbus0 >>>> urtwn0: on usbus0 >>>> urtwn0: could not allocate USB transfers, err=3DUSB_ERR_NO_PIPE >>>> Fatal kernel mode data abort: 'Translation Fault (L1)' on write >>>> trapframe: 0xda29fb88 >>>> FSR=3D00000805, FAR=3D00000000, spsr=3D60000013 >>>> r0 =3D00000000, r1 =3D00000000, r2 =3Dc0a72cb0, r3 =3D00000165 >>>> r4 =3Dc2cd0000, r5 =3Dc0a86650, r6 =3Dc2cd1a80, r7 =3D00000000 >>>> r8 =3Dc2cd1dd8, r9 =3Dc2cd1a20, r10=3Dc2a85dd0, r11=3Dda29fc20 >>>> r12=3D00000000, ssp=3Dda29fc18, slr=3D00000004, pc =3Dc0a3f7cc >>>>=20 >>>> [ thread pid 13 tid 100045 ] >>>> Stopped at ieee80211_ifdetach+0x4c: str r0, [r1] >>>> db> >>>>=20 >>>> btw, as long as you are willing to help, I will keep testing, >>>> in other words, i=E2=80=99m ok. >>>=20 >>> Hi Andriy, >>>=20 >>> Can you fix the crash above and verify this error patch? >>>=20 >>> Andriy: >>>=20 >>> After: >>> usbd_transfer_unsetup(sc->sc_xfer, URTWN_N_TRANSFER); >>> There is no need for: >>> usbd_transfer_drain(sc->sc_xfer[x]); >>=20 >> As I mentioned previously we don't support rtl8192eu. One difference >> between those is the the number of endpoints and its addresses. >>=20 >>> --HPS >> _______________________________________________ >> freebsd-arm@freebsd.org mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-arm >> To unsubscribe, send any mail to = "freebsd-arm-unsubscribe@freebsd.org" > _______________________________________________ > freebsd-arm@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" From owner-freebsd-wireless@freebsd.org Thu Dec 31 02:28:45 2015 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id E2F46A5563F for ; Thu, 31 Dec 2015 02:28:45 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id D428A1357 for ; Thu, 31 Dec 2015 02:28:45 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id tBV2SjrM013776 for ; Thu, 31 Dec 2015 02:28:45 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 188654] [urtwn] tp-link wl-725n Realtek 8188 chip do not work with urtwn driver Date: Thu, 31 Dec 2015 02:28:45 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: unspecified X-Bugzilla-Keywords: X-Bugzilla-Severity: Affects Only Me X-Bugzilla-Who: koobs@FreeBSD.org X-Bugzilla-Status: In Progress X-Bugzilla-Resolution: X-Bugzilla-Priority: Normal X-Bugzilla-Assigned-To: freebsd-wireless@FreeBSD.org X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: see_also Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 31 Dec 2015 02:28:46 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D188654 Kubilay Kocak changed: What |Removed |Added ---------------------------------------------------------------------------- See Also| |https://bugs.freebsd.org/bu | |gzilla/show_bug.cgi?id=3D2= 054 | |77 --=20 You are receiving this mail because: You are the assignee for the bug.= From owner-freebsd-wireless@freebsd.org Fri Jan 1 11:08:51 2016 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 1E38EA59467 for ; Fri, 1 Jan 2016 11:08:51 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 0F2F21C10 for ; Fri, 1 Jan 2016 11:08:51 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id u01B8nq8072738 for ; Fri, 1 Jan 2016 11:08:50 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 193788] Intel WiFi Dual Band 7260 NIC not supported Date: Fri, 01 Jan 2016 11:08:50 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: 11.0-CURRENT X-Bugzilla-Keywords: X-Bugzilla-Severity: Affects Many People X-Bugzilla-Who: greg@unrelenting.technology X-Bugzilla-Status: New X-Bugzilla-Resolution: X-Bugzilla-Priority: --- X-Bugzilla-Assigned-To: freebsd-wireless@FreeBSD.org X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: cc Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 01 Jan 2016 11:08:51 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D193788 Greg V changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |greg@unrelenting.technology --- Comment #2 from Greg V --- This should be closed, the iwm driver is in -CURRENT, works on my ThinkPad = X240 with the 7260. --=20 You are receiving this mail because: You are the assignee for the bug.= From owner-freebsd-wireless@freebsd.org Sat Jan 2 05:54:48 2016 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 3D424A5F32F for ; Sat, 2 Jan 2016 05:54:48 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 2EAB41724 for ; Sat, 2 Jan 2016 05:54:48 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id u025sm6A068287 for ; Sat, 2 Jan 2016 05:54:48 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 169433] [iwn] iwn(4) doesn't support 6235 chip. Date: Sat, 02 Jan 2016 05:54:48 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: unspecified X-Bugzilla-Keywords: patch X-Bugzilla-Severity: Affects Only Me X-Bugzilla-Who: jpm820@gmail.com X-Bugzilla-Status: In Progress X-Bugzilla-Resolution: X-Bugzilla-Priority: Normal X-Bugzilla-Assigned-To: freebsd-wireless@FreeBSD.org X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: cc Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 02 Jan 2016 05:54:48 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D169433 Joe Maloney changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |jpm820@gmail.com --- Comment #10 from Joe Maloney --- Hello I see this question has been asked but I did not see an answer. I ha= ve this same chip. Are there any plans for this driver to be backported in ti= me for 10.3? This has been backported to PCBSD's 10.2 release, and 10.1 relea= se prior.=20=20 Would project policy hold a fix like this back until 11? What would hold it back until 11 if I may ask? I am just wondering if I can help the project = when I notice these things to backport them someday if I am ever punished with a commit bit. Thanks for your time. --=20 You are receiving this mail because: You are the assignee for the bug.= From owner-freebsd-wireless@freebsd.org Sat Jan 2 06:14:16 2016 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id DEAE8A5F71F for ; Sat, 2 Jan 2016 06:14:16 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id D00381D0A for ; Sat, 2 Jan 2016 06:14:16 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id u026EE9l081397 for ; Sat, 2 Jan 2016 06:14:16 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 169433] [iwn] iwn(4) doesn't support 6235 chip. Date: Sat, 02 Jan 2016 06:14:14 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: unspecified X-Bugzilla-Keywords: patch X-Bugzilla-Severity: Affects Only Me X-Bugzilla-Who: koobs@FreeBSD.org X-Bugzilla-Status: In Progress X-Bugzilla-Resolution: X-Bugzilla-Priority: Normal X-Bugzilla-Assigned-To: freebsd-wireless@FreeBSD.org X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: see_also Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 02 Jan 2016 06:14:17 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D169433 Kubilay Kocak changed: What |Removed |Added ---------------------------------------------------------------------------- See Also| |https://bugs.freebsd.org/bu | |gzilla/show_bug.cgi?id=3D1= 818 | |98 --=20 You are receiving this mail because: You are the assignee for the bug.= From owner-freebsd-wireless@freebsd.org Sat Jan 2 06:14:15 2016 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id EBD36A5F71A for ; Sat, 2 Jan 2016 06:14:15 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id DC46F1D03 for ; Sat, 2 Jan 2016 06:14:15 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id u026EE9Z081397 for ; Sat, 2 Jan 2016 06:14:15 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 181898] [iwn] [patch] Centrino Advanced-N 6235 with latest iwn(4) Date: Sat, 02 Jan 2016 06:14:14 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: 10.0-CURRENT X-Bugzilla-Keywords: easy, patch X-Bugzilla-Severity: Affects Only Me X-Bugzilla-Who: koobs@FreeBSD.org X-Bugzilla-Status: Closed X-Bugzilla-Resolution: FIXED X-Bugzilla-Priority: Normal X-Bugzilla-Assigned-To: adrian@freebsd.org X-Bugzilla-Flags: mfc-stable10? X-Bugzilla-Changed-Fields: flagtypes.name keywords assigned_to see_also cc Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 02 Jan 2016 06:14:16 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D181898 Kubilay Kocak changed: What |Removed |Added ---------------------------------------------------------------------------- Flags| |mfc-stable10? Keywords| |easy, patch Assignee|freebsd-wireless@FreeBSD.or |adrian@freebsd.org |g | See Also| |https://bugs.freebsd.org/bu | |gzilla/show_bug.cgi?id=3D1= 738 | |98, | |https://bugs.freebsd.org/bu | |gzilla/show_bug.cgi?id=3D1= 694 | |33 CC| |mav@FreeBSD.org --- Comment #3 from Kubilay Kocak --- Assign to committer that resolved. Also track this was not MFC'd to stable/= 10. Also reference other related (same?) issues, one of which is still not clos= ed --=20 You are receiving this mail because: You are the assignee for the bug.= From owner-freebsd-wireless@freebsd.org Sat Jan 2 06:14:16 2016 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 3FCE4A5F71D for ; Sat, 2 Jan 2016 06:14:16 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 311B01D05 for ; Sat, 2 Jan 2016 06:14:16 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id u026EE9d081397 for ; Sat, 2 Jan 2016 06:14:16 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 173898] [iwn] [patch] iwn(4) DOES support 6235 chip. Date: Sat, 02 Jan 2016 06:14:14 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: 10.0-CURRENT X-Bugzilla-Keywords: X-Bugzilla-Severity: Affects Only Me X-Bugzilla-Who: koobs@FreeBSD.org X-Bugzilla-Status: Closed X-Bugzilla-Resolution: FIXED X-Bugzilla-Priority: Normal X-Bugzilla-Assigned-To: freebsd-wireless@FreeBSD.org X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: see_also Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 02 Jan 2016 06:14:16 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D173898 Kubilay Kocak changed: What |Removed |Added ---------------------------------------------------------------------------- See Also| |https://bugs.freebsd.org/bu | |gzilla/show_bug.cgi?id=3D1= 818 | |98 --=20 You are receiving this mail because: You are the assignee for the bug.= From owner-freebsd-wireless@freebsd.org Sat Jan 2 06:16:35 2016 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id C83A2A5F7C2 for ; Sat, 2 Jan 2016 06:16:35 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id B8F031E7F for ; Sat, 2 Jan 2016 06:16:35 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id u026GZ7R085096 for ; Sat, 2 Jan 2016 06:16:35 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 169433] [iwn] iwn(4) doesn't support 6235 chip. Date: Sat, 02 Jan 2016 06:16:35 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: unspecified X-Bugzilla-Keywords: needs-qa, patch X-Bugzilla-Severity: Affects Only Me X-Bugzilla-Who: koobs@FreeBSD.org X-Bugzilla-Status: Open X-Bugzilla-Resolution: X-Bugzilla-Priority: Normal X-Bugzilla-Assigned-To: freebsd-wireless@FreeBSD.org X-Bugzilla-Flags: mfc-stable10? X-Bugzilla-Changed-Fields: flagtypes.name keywords bug_status Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 02 Jan 2016 06:16:35 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D169433 Kubilay Kocak changed: What |Removed |Added ---------------------------------------------------------------------------- Flags| |mfc-stable10? Keywords| |needs-qa Status|In Progress |Open --- Comment #11 from Kubilay Kocak --- This can't be in progress without an Assignee, re-open. This is an easy candidate for MFC'ing to stable/10, so that 10.3-RELEASE gets it. @Mav, since you're a committer and the original reporter of this issue, you= may be able to assist getting these issues resolved and MFC'd, since they all contain patches, and some (in other referenced See Also issues) have even b= een committed. --=20 You are receiving this mail because: You are the assignee for the bug.= From owner-freebsd-wireless@freebsd.org Sat Jan 2 06:16:45 2016 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 23D6CA5F7D6 for ; Sat, 2 Jan 2016 06:16:45 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 14C081EA4 for ; Sat, 2 Jan 2016 06:16:45 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id u026GiMs085416 for ; Sat, 2 Jan 2016 06:16:44 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 169433] [iwn] iwn(4) doesn't support 6235 chip. Date: Sat, 02 Jan 2016 06:16:45 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: unspecified X-Bugzilla-Keywords: easy, needs-qa, patch X-Bugzilla-Severity: Affects Only Me X-Bugzilla-Who: koobs@FreeBSD.org X-Bugzilla-Status: Open X-Bugzilla-Resolution: X-Bugzilla-Priority: Normal X-Bugzilla-Assigned-To: freebsd-wireless@FreeBSD.org X-Bugzilla-Flags: mfc-stable10? X-Bugzilla-Changed-Fields: keywords Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 02 Jan 2016 06:16:45 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D169433 Kubilay Kocak changed: What |Removed |Added ---------------------------------------------------------------------------- Keywords| |easy --=20 You are receiving this mail because: You are the assignee for the bug.= From owner-freebsd-wireless@freebsd.org Sat Jan 2 11:57:50 2016 Return-Path: Delivered-To: freebsd-wireless@mailman.ysv.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) by mailman.ysv.freebsd.org (Postfix) with ESMTP id 1E3F0A5E3BE for ; Sat, 2 Jan 2016 11:57:50 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id 053001CB4 for ; Sat, 2 Jan 2016 11:57:50 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id u02BvmNo034607 for ; Sat, 2 Jan 2016 11:57:49 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-wireless@FreeBSD.org Subject: [Bug 193788] Intel WiFi Dual Band 7260 NIC not supported Date: Sat, 02 Jan 2016 11:57:48 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: wireless X-Bugzilla-Version: 11.0-CURRENT X-Bugzilla-Keywords: X-Bugzilla-Severity: Affects Many People X-Bugzilla-Who: cs@FreeBSD.org X-Bugzilla-Status: Closed X-Bugzilla-Resolution: FIXED X-Bugzilla-Priority: --- X-Bugzilla-Assigned-To: freebsd-wireless@FreeBSD.org X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: bug_status resolution Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 02 Jan 2016 11:57:50 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D193788 Carlo Strub changed: What |Removed |Added ---------------------------------------------------------------------------- Status|New |Closed Resolution|--- |FIXED --- Comment #3 from Carlo Strub --- Agreed. It works pretty fine (not perfect though) on my X240 as well. --=20 You are receiving this mail because: You are the assignee for the bug.=