Date: Sun, 21 Apr 1996 08:41:04 -0700 From: "Justin T. Gibbs" <gibbs@freefall.freebsd.org> To: Paulo Menezes <paulo@pegasus.isr.uc.pt> Cc: stable@FreeBSD.org Subject: Re: Another problem with Adaptec 2940 and S3TRIO64 Message-ID: <199604211541.IAA23080@freefall.freebsd.org> In-Reply-To: Your message of "Sun, 21 Apr 1996 16:31:27 BST." <Pine.SUN.3.91.960421162027.3511A-100000@pioneer>
next in thread | previous in thread | raw e-mail | index | archive | help
Moved to -stable. >On Sun, 14 Apr 1996, Justin T. Gibbs wrote: > >> The aic7xxx driver in 2.1R has problems. Upgrade to 2.1-STABLE and >> see if your problems go away. >> > >Well, I did... and it still shows the same problem :( >I installed the stable-kernel and started a "make world"... and after >installing the libs, it hang, with lots of messages related with the scsi >controller. >One of the messages was :"BUS DEVICE RESET message queued" As a first step, remove the entries for every device in your kernel config file that you do not need, and recompile your kernel. As a second step, make sure that the termination on your hard drive is active and powered from the drive (not the SCSI bus), use a short cable, and ensure that termination is turned on with your 2940. >Thanks again > >Paulo >---- -- Justin T. Gibbs =========================================== FreeBSD: Turning PCs into workstations ===========================================
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199604211541.IAA23080>