From owner-freebsd-questions Thu Jan 1 00:01:06 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id AAA28726 for questions-outgoing; Thu, 1 Jan 1998 00:01:06 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from ocala.cs.miami.edu (ocala.cs.miami.edu [129.171.34.17]) by hub.freebsd.org (8.8.7/8.8.7) with SMTP id AAA28717 for ; Thu, 1 Jan 1998 00:01:02 -0800 (PST) (envelope-from jmcla@ocala.cs.miami.edu) Received: from ocala.cs.miami.edu by ocala.cs.miami.edu via SMTP (950413.SGI.8.6.12/940406.SGI) for id DAA17175; Thu, 1 Jan 1998 03:01:01 -0500 Date: Thu, 1 Jan 1998 03:01:01 -0500 (EST) From: "Joe \"Marcus\" Clarke" To: FreeBSD User Questions List Subject: tclsh Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I just installed 2.2.5-RELEASE from scratch, and things went flawlessly. I did it via ftp using a modem...not bad guys! Anyway, after a lot of configuring and tweaking, I finally needed to run the addgroup command. Much to my surprise, it didn't work. Turns out, /usr/bin/tclsh didn't exist. I KNOW I didn't delete it. NEVER touch anything in /usr/bin. None the less, I had installed tcl8.02, so I simply edited the script (I touched something in /usr/bin). I'd like to know if this is standard with 2.2.5, or if the tcl8.02 port deleted it, or what. Also, if this is a fluke, could someone email me the tclsh that came with 2.2.5-RELEASE so I can fill the hole? Thanks. Joe Clarke From owner-freebsd-questions Thu Jan 1 00:05:34 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id AAA28967 for questions-outgoing; Thu, 1 Jan 1998 00:05:34 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from bnoc.net (blitz.bnoc.net [204.157.39.2]) by hub.freebsd.org (8.8.7/8.8.7) with SMTP id AAA28955 for ; Thu, 1 Jan 1998 00:05:29 -0800 (PST) (envelope-from jamesh@bnoc.net) Received: from [204.157.39.69] by bnoc.net (SMTPD32-4.0) id AE267630200; Thu, 01 Jan 1998 03:04:54 -0500 Message-ID: <34AB4E4C.2F9441B9@bnoc.net> Date: Thu, 01 Jan 1998 03:05:32 -0500 From: James Higgins X-Mailer: Mozilla 4.04 [en] (Win95; I) MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Panasonic CR-563 CD-ROM Drives. Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Ok, I am new to Free-BSD but have set up RedHat and Slackware linux systems (on this same machine I might add) in the past. I have a Panasonic CR-563 cdrom that attaches through a proprietary Soundblaster interface. I cannot seem to detect it at boot time. When installing at the "boot: " prompt I specify -c then enter visual mode. Disable all hardware I know that is not present in my machine, SCSI cards and Ethernet cards (it is a home machine) and press enter on the Matsushita/Panasonic CD-Rom device. I change the I/O address to 0x630. Windows 95 shows the device at 0x630 and linux also detects the drive at 0x630. Kernel parameter in linux is "sbpcd=0x630,LaserMate" if that means anything to anyone. Then I save the userconfig parameters and continue booting. The drive light flashes like the drive is read, but when I select it as my installation media I get the now infamous "No CDROM devices found.... blah blah blah" error. I can switch to virtual console 2 and see the line: "DEBUG: Try at matcdc0 retruns errno 2". These are the only error messages I seem to get. I know it is not a hardware problem because the drive works perfectly in Windows. Can someone please help me. James Higgins From owner-freebsd-questions Thu Jan 1 01:51:42 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id BAA03186 for questions-outgoing; Thu, 1 Jan 1998 01:51:42 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from send1b.yahoomail.com (send1b.yahoomail.com [205.180.60.23]) by hub.freebsd.org (8.8.7/8.8.7) with SMTP id BAA03180 for ; Thu, 1 Jan 1998 01:51:37 -0800 (PST) (envelope-from rgireyev@yahoo.com) Message-ID: <19980101095122.8924.rocketmail@send1b.yahoomail.com> Received: from [206.175.228.17] by send1b; Thu, 01 Jan 1998 01:51:22 PST Date: Thu, 1 Jan 1998 01:51:22 -0800 (PST) From: Rudy Gireyev Subject: Re: X and Dell 17 inch To: Shoma & Ash Yadav Cc: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Happy New Year Ash! What resolution are you picking in XF86Config? Resolution and mode go hand in hand, which mode are you picking? Are you setting the clock stuff? Does XF86Config ask you to set the clock stuff? Are you setting the RAMDAC? Does XF86Config ask you to set the RAMDAC? Are you running virtual desktop? Rudy ---Shoma & Ash Yadav wrote: > > Rudy, > Yes I did run XF86Config .. but the resolution keeps defaulting to 320x200 > and the Ctrl-Alt-+ or - does not change the resolution in any way. > Cheers > Ash ;) > > p.s. Happy New Year !!!! > -----Original Message----- > From: Rudy Gireyev > To: Shoma & Ash Yadav ; questions@freebsd.org > > Date: Thursday, January 01, 1998 10:44 AM > Subject: Re: > > > >Ash, did you run XF86Config? > >I think that is all you have to do. > >You can run from /stand/sysinstall or yourself from /usr/X11R6 somewhere > > > >Rudy > > > >---Shoma & Ash Yadav wrote: > >> > >> Alex, > >> Thanx a lot for the info . I did manage to get it to work after > >enabling the > >> psm0 device. Another frustrating problem that I have run into now is > >trying > >> to get my DELL VS17 monitor to display a larger screen space. It > >seems to > >> default to 320x200 . I have tried making changes that are suggested > >in the > >> monitors file but to no avail. Would appreciate your help in > >figuring this > >> out. I have tried using twm, gwm and fvwm95 and all default to the > >320x200 > >> display. > >> > >> thanx > >> Ash ;) > >> > >> Wish you all a Hap-Hap-Happy New Year > >> > >> > > > >_________________________________________________________ > >DO YOU YAHOO!? > >Get your free @yahoo.com address at http://mail.yahoo.com > > _________________________________________________________ DO YOU YAHOO!? Get your free @yahoo.com address at http://mail.yahoo.com From owner-freebsd-questions Thu Jan 1 02:03:49 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id CAA03734 for questions-outgoing; Thu, 1 Jan 1998 02:03:49 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from send1a.yahoomail.com (send1a.yahoomail.com [205.180.60.22]) by hub.freebsd.org (8.8.7/8.8.7) with SMTP id CAA03729 for ; Thu, 1 Jan 1998 02:03:46 -0800 (PST) (envelope-from rgireyev@yahoo.com) Message-ID: <19980101100323.22446.rocketmail@send1a.yahoomail.com> Received: from [206.175.228.17] by send1a; Thu, 01 Jan 1998 02:03:23 PST Date: Thu, 1 Jan 1998 02:03:23 -0800 (PST) From: Rudy Gireyev Subject: Re: changing screen res in X To: Shoma & Ash Yadav , Greg Lehey Cc: John Preisler , garbanzo@hooked.net, questions@FreeBSD.ORG, dwhite@resnet.uoregon.edu MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk OK, OK I cannot beleive I could have been this stupid. After I read this message I think it finally hit me. When I was configuring my X the default configuration that ships with X was pointing to the wrong Xresources file. So, what I'm basically trying to say is that X never sees any of your changes and uses the same file as it used the very first time. Possibly, a default example file that shipped with X. Rudy ---Shoma & Ash Yadav wrote: > > Hi Greg, > The machine has a S3 Vision 864 chipset ( which is what I got from > SuperProbe). I am using the SVGA server eith it and the chips set is set to > generic . I can't send u the startx output cause my FreeBSD machine is'nt > networked yet and I cannot copy files over to my PC from where I am sending > this email. However startfx does not seem to notice the new display modes > and defaults to builtin 320x200. The entry for that has a (--) so I guess it > is not reading it from the XF86Config file. Also if I cahnge to anything > above 8 bpp it complains that my "generic" chipset will not allow it. > > thanx > Ash ;) > > -----Original Message----- > From: Greg Lehey > To: Shoma & Ash Yadav > Cc: John Preisler ; dwite@resnet.uoregon.edu > ; garbanzo@hooked.net ; > questions@FreeBSD.ORG > Date: Thursday, January 01, 1998 2:51 PM > Subject: Re: changing screen res in X > > > >On Thu, Jan 01, 1998 at 02:30:05PM +0800, Shoma & Ash Yadav wrote: > >> > >> John, Doug, Alex > >> Thanx a lot for your replies ... and wish U all a Hap-Hap-Happy New Year > ... > >> But ... I am still unable to get my SVGA display to go beyond the 320x200 > >> that it defaults to. Even after removing the 320x200 entry for 8 bit > depth > >> in SVGA definitions in XF86Config . If anyone out there has managed to > run > >> the X server on a dell VS 17X monitor attached to a Dell Optiplex 590 cd > u > >> pls send me a copy of your XF86Config file. > > > >Sorry, I haven't been following this thread. Is this a machine with a > >NeoMagic chipset? If so, you're out of luck: XFree86 doesn't support > >it. You should be able to run 640x480 four colours, though. The > >alternative is the XI Graphics server, which costs Real Money. > > > >If that's not the problem (i.e. you have a different chip set), let's > >see the output of the startx command. > > > >Greg > > _________________________________________________________ DO YOU YAHOO!? Get your free @yahoo.com address at http://mail.yahoo.com From owner-freebsd-questions Thu Jan 1 02:13:55 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id CAA04133 for questions-outgoing; Thu, 1 Jan 1998 02:13:55 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from mail.netcetera.dk (root@sleipner.netcetera.dk [194.192.207.2]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id CAA04127 for ; Thu, 1 Jan 1998 02:13:52 -0800 (PST) (envelope-from leifn@image.dk) Received: (from uucp@localhost) by mail.netcetera.dk (8.8.8/8.8.8) with UUCP id LAA06870 for freebsd-questions@freebsd.org; Thu, 1 Jan 1998 11:09:27 +0100 Received: by swimsuit.swimsuit.roskildebc.dk (0.99.970109) id AA02914; 01 Jan 98 01:07:11 +0100 From: leifn@image.dk (Leif Neland) Date: 31 Dec 97 16:18:26 +0100 Subject: Forwarding IP wierdly. Message-ID: References: <199712310511.VAA20231@exit.com> Organization: Fidonet: UNIX-sysadm søger job To: freebsd-questions@freebsd.org Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk At 31 Dec 97 06:11:40 Frank Mayhar wrote regarding Forwarding IP wierdly. FM> Else, if someone can tell me how to convince MacAfee VirusScan FM> to use a proxy to update itself, that would work, too. Do you administer your own DNS? Then try giving the MacAfee-update-site the ip-adress of your proxy. Leif Neland leifn@image.dk --- |Fidonet: Leif Neland 2:234/49 |Internet: leifn@image.dk From owner-freebsd-questions Thu Jan 1 02:29:29 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id CAA04747 for questions-outgoing; Thu, 1 Jan 1998 02:29:29 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from iron.singnet.com.sg (iron.singnet.com.sg [165.21.7.29]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id CAA04741 for ; Thu, 1 Jan 1998 02:29:26 -0800 (PST) (envelope-from shomash@mbox4.singnet.com.sg) Received: from area51.singnet.com.sg (tns01160.singnet.com.sg [165.21.202.190]) by iron.singnet.com.sg (8.8.7/8.8.7) with SMTP id SAA08700; Thu, 1 Jan 1998 18:29:10 +0800 (SGT) From: "Shoma & Ash Yadav" To: "Norman C Rice" , Cc: Subject: Re: changing screen res in X Date: Thu, 1 Jan 1998 18:29:43 +0800 Message-ID: <01bd16a0$2c73b1c0$36cd15a5@area51.singnet.com.sg> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 4.71.1712.3 X-MimeOLE: Produced By Microsoft MimeOLE V4.71.1712.3 Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Norman / Alex, I have tried using the S3 server but that bombs out with the following errors ... S3V: PCI: unknown ( please report), ID 0x88c1 rev 0, Linear FB@0x40000000 S3V: Unknown S3 Chipset: chip_id = 0xc1 rev.1 Ash ;) -----Original Message----- From: Norman C Rice To: Shoma & Ash Yadav Date: Thursday, January 01, 1998 3:29 PM Subject: Re: changing screen res in X >On Thu, Jan 01, 1998 at 03:15:14PM +0800, Shoma & Ash Yadav wrote: >> Hi Greg, >> The machine has a S3 Vision 864 chipset ( which is what I got from > >I haven't been following this real closely, but have you tried using >the XF86_S3 driver (accelerated driver)? You will need to change the >symbolic link for X. > >[snip] > >> >On Thu, Jan 01, 1998 at 02:30:05PM +0800, Shoma & Ash Yadav wrote: >> >> >> >> John, Doug, Alex >> >> Thanx a lot for your replies ... and wish U all a Hap-Hap-Happy New Year >> ... >> >> But ... I am still unable to get my SVGA display to go beyond the 320x200 >> >> that it defaults to. Even after removing the 320x200 entry for 8 bit >> depth >> >> in SVGA definitions in XF86Config . If anyone out there has managed to >> run >> >> the X server on a dell VS 17X monitor attached to a Dell Optiplex 590 cd >> u >> >> pls send me a copy of your XF86Config file. >> > >> >Sorry, I haven't been following this thread. Is this a machine with a >> >NeoMagic chipset? If so, you're out of luck: XFree86 doesn't support >> >it. You should be able to run 640x480 four colours, though. The >> >alternative is the XI Graphics server, which costs Real Money. >> > >> >If that's not the problem (i.e. you have a different chip set), let's >> >see the output of the startx command. >> > >> >Greg > >-- >Regards, >Norman C. Rice, Jr. From owner-freebsd-questions Thu Jan 1 02:36:20 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id CAA05013 for questions-outgoing; Thu, 1 Jan 1998 02:36:20 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from onyx.interactive.net (root@onyx.interactive.net [208.192.224.6]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id CAA05008 for ; Thu, 1 Jan 1998 02:36:18 -0800 (PST) (envelope-from cbooth@onyx.interactive.net) Received: from localhost (host015.nyc.interactive.net [208.192.234.115]) by onyx.interactive.net (8.8.8/8.8.5) with SMTP id FAA26603 for ; Thu, 1 Jan 1998 05:36:14 -0500 (EST) Date: Thu, 1 Jan 1998 05:32:57 -0500 (EST) From: "Christopher J. Booth" X-Sender: cbooth@localhost To: freebsd-questions Subject: Mouse No Move; Teepee 2.2.5.... Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I have a FreeBSD 2.2.5 mouse problem. I had the same problem in 2.2.2, and solved it with a reinstall. I would prefer not to do that this time--it is so inelegant a solution! I have a 3-button mouse on /cuaa1/sio1/COM2 (the mouse is switchable between 2- and 3-button settings, and, yes, _is_ set to 3 buttons). I have /etc/XF86Config set as Section "Pointer" Protocol "MouseSystems" Device "/dev/sysmouse" , which I understand is appropriate and correct. [Using anything but /dev/sysmouse here causes the machine to lock up and crash. I have to either control-alt-delete or push the reset button, which is not cool.] I have tried /etc/rc.conf in the following settings, to no effect: moused_type="NO" mouse_port="" moused_flags="" and moused_type="mousesystems" mouse_port="/dev/cuaa1" moused_flags="" I think that my problem is elsewhere; I have tried all kinds of different values in /etc/XF86Config and /etc/rc.conf, and also vidcontrol -m on and...no mouse movement. It is like the night before Christmas in X. X will start up this way....It opens, and the cursor just sits, dead in the water. Ugh. Can anyone suggest another file that might be missing or malconfigured? ___________________________ cbooth@onyx.interactive.net Christopher J. Booth From owner-freebsd-questions Thu Jan 1 03:09:31 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id DAA06290 for questions-outgoing; Thu, 1 Jan 1998 03:09:31 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from gatekeeper.barcode.co.il (gatekeeper.barcode.co.il [192.116.93.17]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id DAA06283 for ; Thu, 1 Jan 1998 03:09:24 -0800 (PST) (envelope-from nadav@barcode.co.il) Received: (from smap@localhost) by gatekeeper.barcode.co.il (8.8.7/8.8.7) id NAA05527; Thu, 1 Jan 1998 13:09:01 +0200 (IST) (envelope-from nadav@barcode.co.il) X-Authentication-Warning: gatekeeper.barcode.co.il: smap set sender to using -f Received: from localhost.barcode.co.il(127.0.0.1) by gatekeeper.barcode.co.il via smap (V2.0) id xma005525; Thu, 1 Jan 98 13:08:55 +0200 Message-ID: <34AB7934.2F5B@barcode.co.il> Date: Thu, 01 Jan 1998 13:08:36 +0200 From: Nadav Eiron X-Mailer: Mozilla 3.0 (X11; I; SunOS 5.6 sun4u) MIME-Version: 1.0 To: Rudy Gireyev CC: Ricardo AG Almeida , "Eric J. Schwertfeger" , questions@FreeBSD.ORG Subject: Re: Hardware Question References: <19980101024808.25841.rocketmail@send1b.yahoomail.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Rudy Gireyev wrote: > > If there are only two machines involved what's wrong with a regular > parallel (laplink) cable? :-) Performance, of course. A laplink cable will be roughly 10 times slower than Ethernet, if not more. > Or am I lost here? > > Rudy > Nadav From owner-freebsd-questions Thu Jan 1 06:10:14 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id GAA14574 for questions-outgoing; Thu, 1 Jan 1998 06:10:14 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from mail.cs.tu-berlin.de (root@mail.cs.tu-berlin.de [130.149.17.13]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id GAA14568 for ; Thu, 1 Jan 1998 06:10:08 -0800 (PST) (envelope-from wosch@cs.tu-berlin.de) Received: from panke.panke.de (anonymous214.ppp.cs.tu-berlin.de [130.149.17.214]) by mail.cs.tu-berlin.de (8.8.6/8.8.8) with ESMTP id PAA22835; Thu, 1 Jan 1998 15:08:44 +0100 (MET) Received: (from wosch@localhost) by panke.panke.de (8.8.5/8.6.12) id NAA00538; Thu, 1 Jan 1998 13:55:30 +0100 (MET) To: freebsd@phoenix.aldhfn.org (Skip Watson) Cc: freebsd-questions@freebsd.org Subject: Re: long login names References: <259ea977.u8t20e.8e6b1-freebsd@phoenix.aldhfn.org> From: Wolfram Schneider Date: 01 Jan 1998 13:55:27 +0100 In-Reply-To: freebsd@phoenix.aldhfn.org's message of Thu, 1 Jan 98 00:51:09 EST Message-ID: Lines: 8 Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk freebsd@phoenix.aldhfn.org (Skip Watson) writes: > I thought that I had read (rather some time ago) that long login > names were usable. Is it true? For FreeBSD 3.0-current yes, for FreeBSD 2.2.x no. -- Wolfram Schneider http://www.freebsd.org/~wosch/ From owner-freebsd-questions Thu Jan 1 07:59:37 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id HAA17627 for questions-outgoing; Thu, 1 Jan 1998 07:59:37 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from iron.singnet.com.sg (iron.singnet.com.sg [165.21.7.29]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id HAA17622 for ; Thu, 1 Jan 1998 07:59:34 -0800 (PST) (envelope-from shomash@mbox4.singnet.com.sg) Received: from area51.singnet.com.sg (tns00716.singnet.com.sg [165.21.201.146]) by iron.singnet.com.sg (8.8.7/8.8.7) with SMTP id XAA15159 for ; Thu, 1 Jan 1998 23:59:30 +0800 (SGT) From: "Shoma & Ash Yadav" To: Subject: Running freeBSD on a DELL 590 Date: Fri, 2 Jan 1998 00:00:07 +0800 Message-ID: <01bd16ce$54a1b600$36cd15a5@area51.singnet.com.sg> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0133_01BD1711.62C4F600" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 4.71.1712.3 X-MimeOLE: Produced By Microsoft MimeOLE V4.71.1712.3 Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk This is a multi-part message in MIME format. ------=_NextPart_000_0133_01BD1711.62C4F600 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Folks, I finally got the X server to work right after going thru the xf86config = program and select the S3 server. I was earlier selecting the S3V server = and SVGA which did not work. Thanx to everyone who send in their = suggestions. I look forward to playing around more with freeBSD and = having the wonderful support network out on the net. Kudos to all .... Cheers Ash ;) ------=_NextPart_000_0133_01BD1711.62C4F600 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Folks,
I finally got the X server to work = right after=20 going thru the xf86config program and select the S3 server. I was = earlier=20 selecting the S3V server and SVGA which did not work. Thanx to everyone = who send=20 in their suggestions. I look forward to playing around more with freeBSD = and=20 having the wonderful support network out on the net.
 
Kudos to all ....
 
Cheers
Ash ;)
------=_NextPart_000_0133_01BD1711.62C4F600-- From owner-freebsd-questions Thu Jan 1 08:20:13 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id IAA18697 for questions-outgoing; Thu, 1 Jan 1998 08:20:13 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from buffnet4.buffnet.net (buffnet4.buffnet.net [205.246.19.13]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id IAA18640 for ; Thu, 1 Jan 1998 08:20:03 -0800 (PST) (envelope-from shovey@buffnet.net) Received: from buffnet11.buffnet.net (buffnet11.buffnet.net [205.246.19.55]) by buffnet4.buffnet.net (8.7.5/8.7.3) with SMTP id LAA04869; Thu, 1 Jan 1998 11:18:56 -0500 (EST) Date: Thu, 1 Jan 1998 11:18:30 -0500 (EST) From: Steve Hovey To: Randy Katz cc: questions@FreeBSD.ORG Subject: Re: HACKED (again) In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk I personally dont trust ssh - I have no other reason not to trust it than that I suffered a root incursion once shortly after installing it - since it was the last thing in, I did not reinstall it when I rebuilt the system. On Wed, 31 Dec 1997, Randy Katz wrote: > Ok, > > Please help me out here. I shut off telnet to a particular host and had > sshd & ftpd (wu beta 15) running with access only from one other host. The > other host had telnetd running and ftpd. > > They got into the host (let's call it host1) as root somehow and changed > an index.html file of a Web Site (bragging). They erased their trail, > blew away wtmp and any log entries... > > The way I know they got in as root is .history in /root had entries of > their activity. > > The other host which could access this server via ssh had no sign of > molestation that I can see. The log files and wtmp were completely in > tact and no entries from anyone other then the intended (only 2 people > log into this machine). > > I WANT TO KNOW HOW THEY DID IT. Can anyone address this? > > I'm NOT asking for a solution about what to do. I just want to know how > they gained access. The machine is FreeBSD 2.2.5 the latest. > > Thanx again, > Randy Katz > ------------------------------------------------------------------ Steve Hovey Chief Engineer BuffNET More Than Just a Connection! ------------------------------------------------------------------ From owner-freebsd-questions Thu Jan 1 08:38:56 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id IAA19695 for questions-outgoing; Thu, 1 Jan 1998 08:38:56 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from emu.sourcee.com (emu.sourcee.com [199.201.159.173]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id IAA19682 for ; Thu, 1 Jan 1998 08:38:52 -0800 (PST) (envelope-from nrice@emu.sourcee.com) Received: (from nrice@localhost) by emu.sourcee.com (8.8.8/8.8.3) id LAA16439; Thu, 1 Jan 1998 11:38:44 -0500 (EST) Message-ID: <19980101113843.44322@emu.sourcee.com> Date: Thu, 1 Jan 1998 11:38:43 -0500 From: Norman C Rice To: Shoma & Ash Yadav Cc: freebsd-questions@freebsd.org Subject: Re: changing screen res in X References: <01bd16a0$2c73b1c0$36cd15a5@area51.singnet.com.sg> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.88 In-Reply-To: <01bd16a0$2c73b1c0$36cd15a5@area51.singnet.com.sg>; from Shoma & Ash Yadav on Thu, Jan 01, 1998 at 06:29:43PM +0800 Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk On Thu, Jan 01, 1998 at 06:29:43PM +0800, Shoma & Ash Yadav wrote: > Norman / Alex, > I have tried using the S3 server but that bombs out with the following > errors ... > > S3V: PCI: unknown ( please report), ID 0x88c1 rev 0, Linear FB@0x40000000 ^^^^^^^^^^^^^ It appears that you used the accelerated driver (the one that xf86config suggested?). I don't know which version of XFree86 you're running (X -showconfig), but Version 3.3.1 from August 11, 1997 has the following highlight: "Various problems with the S3V server and the SVGA s3v driver have been fixed." If you are running the current XFree86 release, you should report the above message and background data to the XFree86 Project at www.xfree86.org. There is a link on their web site, "Report a bug or ask about a problem", that you can use for this purpose. You should search/read their FAQ prior to your submission (etiquette). > S3V: Unknown S3 Chipset: chip_id = 0xc1 rev.1 > > Ash ;) > -----Original Message----- > From: Norman C Rice > To: Shoma & Ash Yadav > Date: Thursday, January 01, 1998 3:29 PM > Subject: Re: changing screen res in X > > > >On Thu, Jan 01, 1998 at 03:15:14PM +0800, Shoma & Ash Yadav wrote: > >> Hi Greg, > >> The machine has a S3 Vision 864 chipset ( which is what I got from > > > >I haven't been following this real closely, but have you tried using > >the XF86_S3 driver (accelerated driver)? You will need to change the > >symbolic link for X. > > > >[snip] > > > >> >On Thu, Jan 01, 1998 at 02:30:05PM +0800, Shoma & Ash Yadav wrote: > >> >> > >> >> John, Doug, Alex > >> >> Thanx a lot for your replies ... and wish U all a Hap-Hap-Happy New > Year > >> ... > >> >> But ... I am still unable to get my SVGA display to go beyond the > 320x200 > >> >> that it defaults to. Even after removing the 320x200 entry for 8 bit > >> depth > >> >> in SVGA definitions in XF86Config . If anyone out there has managed to > >> run > >> >> the X server on a dell VS 17X monitor attached to a Dell Optiplex 590 > cd > >> u > >> >> pls send me a copy of your XF86Config file. > >> > > >> >Sorry, I haven't been following this thread. Is this a machine with a > >> >NeoMagic chipset? If so, you're out of luck: XFree86 doesn't support > >> >it. You should be able to run 640x480 four colours, though. The > >> >alternative is the XI Graphics server, which costs Real Money. > >> > > >> >If that's not the problem (i.e. you have a different chip set), let's > >> >see the output of the startx command. > >> > > >> >Greg > > > >-- > >Regards, > >Norman C. Rice, Jr. -- Regards, Norman C. Rice, Jr. From owner-freebsd-questions Thu Jan 1 09:10:20 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id JAA21357 for questions-outgoing; Thu, 1 Jan 1998 09:10:20 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from didda.est.is (ppp-52.est.is [194.144.208.152]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id JAA21350 for ; Thu, 1 Jan 1998 09:10:13 -0800 (PST) (envelope-from totii@est.is) Received: from est.is (didda.est.is [192.168.255.1]) by didda.est.is (8.8.7/8.8.7) with ESMTP id RAA00494; Thu, 1 Jan 1998 17:09:30 GMT (envelope-from totii@est.is) Message-ID: <34ABCDC8.FB4E4892@est.is> Date: Thu, 01 Jan 1998 17:09:28 +0000 From: "Þorður Ivarsson" X-Mailer: Mozilla 4.04 [en] (X11; I; FreeBSD 2.2.5-RELEASE i386) MIME-Version: 1.0 To: Randy Katz CC: questions@FreeBSD.ORG Subject: Re: HACKED (again) References: Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Randy Katz wrote: > > Ok, > > Please help me out here. I shut off telnet to a particular host and had > sshd & ftpd (wu beta 15) running with access only from one other host. The > other host had telnetd running and ftpd. > > They got into the host (let's call it host1) as root somehow and changed > an index.html file of a Web Site (bragging). They erased their trail, > blew away wtmp and any log entries... > > The way I know they got in as root is .history in /root had entries of > their activity. > > The other host which could access this server via ssh had no sign of > molestation that I can see. The log files and wtmp were completely in > tact and no entries from anyone other then the intended (only 2 people > log into this machine). > > I WANT TO KNOW HOW THEY DID IT. Can anyone address this? > > I'm NOT asking for a solution about what to do. I just want to know how > they gained access. The machine is FreeBSD 2.2.5 the latest. > > Thanx again, > Randy Katz We got attack from somone that screwed up everything on our system two years ago. We tried to clean up the mess but few months later they ruined our system completely. We spent all the time we could finding vulnerable services, but I think they relinked most of the programs with some sniffers that gave them all information needed any time they needed. My advice is to try everything out very thoroughly and act like the crackers, and try everything out that I can find on the net that is said exploit security holes. Do it on another system please, some research system. -- Þórður Ívarsson Thordur Ivarsson Rafeindavirki Electronic technician Norðurgötu 30 Nordurgotu 30 Box 309 Box 309 602 Akureyri 602 Akureyri Ísland Iceland --------------------------------------------- Somtimes we have to find problem to the answer! --------------------------------------------- From owner-freebsd-questions Thu Jan 1 09:15:10 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id JAA21631 for questions-outgoing; Thu, 1 Jan 1998 09:15:10 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from w2xo.pgh.pa.us (w2xo.pgh.pa.us [206.210.70.5]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id JAA21622 for ; Thu, 1 Jan 1998 09:15:04 -0800 (PST) (envelope-from durham@w2xo.pgh.pa.us) Received: (from durham@localhost) by w2xo.pgh.pa.us (8.8.5/8.8.4) id MAA25009; Thu, 1 Jan 1998 12:15:00 -0500 (EST) Message-ID: X-Mailer: XFMail 1.1 [p0] on FreeBSD Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 7bit MIME-Version: 1.0 In-Reply-To: <01bd167e$b2e22f60$36cd15a5@area51.singnet.com.sg> Date: Thu, 01 Jan 1998 11:50:34 -0500 (EST) Organization: Dis- From: Jim Durham To: Shoma & Ash Yadav Subject: Re: changing screen res in X Cc: questions@freebsd.org Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk On 01-Jan-98 Shoma & Ash Yadav wrote: > >John, Doug, Alex >Thanx a lot for your replies ... and wish U all a Hap-Hap-Happy New Year ... >But ... I am still unable to get my SVGA display to go beyond the 320x200 >that it defaults to. Even after removing the 320x200 entry for 8 bit depth >in SVGA definitions in XF86Config . If anyone out there has managed to run >the X server on a dell VS 17X monitor attached to a Dell Optiplex 590 cd u >pls send me a copy of your XF86Config file. >Any other advise is also appreciated. FYO, I do not have any extra graphics >boards on this machine and the Ctrl-Alt-+ option does not change the >resolution. Since my experience with FreeBSD has been only abt 2 days wd >appreciate all the help to get this running. > >thanx >Ash ;) > I just went through this with my PC at work running an Mach-64 board. I wish I had kept better notes, but, even though you're dealing with a different board, certain things apply.. More than likely, the reason you are not getting mode assignments to 640x480 and higher resolutions is that X thinks these are outside the capability of your monitor, and perhaps your card for those higher than 640x480. A tip-off to this is to start X from a VTY window, then, leave X and check the start-up messages. "Mode 640x480 does not exist" or similar messages are generated when the required sync ranges for 640x480 fall outside what X thinks your monitor will stand. The other problem could be that the virtual resolution or real resolution specified in XF86Config requires more video ram than you actually have. If you know the sync ranges of your monitor, check that you have as wide a window as possible. Most modern monitors will take 50-70hz vertical and 30-50khz horizontal. Be careful to not exceed the horiz range that your monitor will stand. Some monitors could be damaged by running the horizontal freq outside the specified range, although I've never seen this happen..it could, so be careful..Mostly, they just go to the "slanting horizontal line scramble" mode, like an old TV with a misadjusted Horiz hold control. The startup messages should leave tracks on which modes were rejected, but not why. The "why" you have to figure out yourself. You will find xvidtune very helpful if you get some modes working. It allows you to center the image and tweek the size. There used to be a couple of files that were shipped in the "doc" directory of /usr/X11R6/lib/X11, but I noticed that in the last few releases, they are gone. I have these somewhere if you need them, as they explain the theory of scan rates and modes, etc. Good Luck... Jim Durham From owner-freebsd-questions Thu Jan 1 09:33:05 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id JAA22754 for questions-outgoing; Thu, 1 Jan 1998 09:33:05 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from freefall.freebsd.org (freefall.FreeBSD.ORG [204.216.27.21]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id JAA22748 for ; Thu, 1 Jan 1998 09:33:02 -0800 (PST) (envelope-from dave@tgi.com) Received: from ez0.ezlink.com (root@ez0.ezlink.com [199.45.150.1]) by freefall.freebsd.org (8.8.6/8.8.5) with ESMTP id JAA06045 for ; Thu, 1 Jan 1998 09:28:12 -0800 (PST) Received: from tgi.com (deathstar.tgi.com [199.45.150.242]) by ez0.ezlink.com (8.8.8/8.8.8) with SMTP id KAA25907 for ; Thu, 1 Jan 1998 10:36:42 -0700 Message-Id: <199801011736.KAA25907@ez0.ezlink.com> Received: from discovery.tgi.com [192.190.68.1] by tgi.com [192.190.68.1] with SMTP (MDaemon.v2.6.rA.b6.32-R) for ; Thu, 01 Jan 98 10:29:17 -0700 Comments: Authenticated sender is From: "Dave Eldenburg" To: freebsd-questions@freebsd.com Date: Thu, 1 Jan 1998 10:29:17 +0000 MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: help with a new web sight Reply-to: dave@tgi.com Priority: normal X-mailer: Pegasus Mail for Win32 (v2.54) X-MDaemon-Deliver-To: freebsd-questions@freebsd.com Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Hi all, I just got my system up and on-line. I've installed apache and we put our first web pages up. From the local network everything looks fine. When anyone tries to access our system from the outside world the jpg file we use as a background stalls out before it can be completely retrieved. It's not real large, about 40k. I'm using kernel ppp 2.2 through an adtran express external isdn modem. Freebsd has been just great so far, this is the first real problem I've encountered. Anyone have any idea what's going on? You can try my site at www.tgi.com. There's not much there but it's a start. Thanks, Dave -------------------------------------------------- Dave Eldenburg Thistle Grove Industries, Inc. dave@tgi.com -------------------------------------------------- From owner-freebsd-questions Thu Jan 1 09:43:52 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id JAA24515 for questions-outgoing; Thu, 1 Jan 1998 09:43:52 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from horton.iaces.com (horton.iaces.com [204.147.87.98]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id JAA24510 for ; Thu, 1 Jan 1998 09:43:47 -0800 (PST) (envelope-from proot@horton.iaces.com) Received: (from proot@localhost) by horton.iaces.com (8.8.7/8.8.7) id LAA10022; Thu, 1 Jan 1998 11:42:37 -0600 (CST) From: "Paul T. Root" Message-Id: <199801011742.LAA10022@horton.iaces.com> Subject: Re: Hardware Question To: ricardag@ag.com.br (Ricardo AG Almeida) Date: Thu, 1 Jan 1998 11:42:37 -0600 (CST) Cc: ejs@bfd.com, questions@FreeBSD.ORG In-Reply-To: <3.0.32.19971231230725.00956290@ptero.ag.com.br> from Ricardo AG Almeida at "Dec 31, 97 11:07:34 pm" X-Organization: !nterprise Networking Services - ACES X-Phone: (612) 664-3385 X-Fax: (612) 664-4779 X-Page: (800) SKY-PAGE PIN: 537-7270 X-Address: 600 Stinson Blvd, Fl 1S X-Address: Minneapolis, MN 55413 X-Mailer: ELM [version 2.4ME+ PL22 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk In a previous message, Ricardo AG Almeida said: > Neither one of these. The correct cabling is: > > 1 -> 3 > 2 -> 6 > 3 -> 1 > 6 -> 2 > > As it reverses RX with TX. Yep, this is the right one. However, it still won't work on all interfaces. Some cards want power from a hub. My SMC card needs it (de interface). It's the card not the device driver. If you really need a hub and have little money to spend. You might try www.onsale.com. It's an internet auction. I haven't bought anything myself, but I've been looking at it, and it looks like some good prices. -- . _ . _____________ |\_|/__/| / \ / / \/ \ \ / Happy! Happy! \ /__|O||O|__ \ \ Joy! Joy! / |/_ \_/\_/ _\ | \ ___________/ | | (____) | || |/ \/\___/\__/ // _/ (_/ || | ||\ Norman Sippel \ //_/ alias Norman "Muddy" Stimpy \______// __|| __|| (____(____) From owner-freebsd-questions Thu Jan 1 09:56:24 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id JAA25442 for questions-outgoing; Thu, 1 Jan 1998 09:56:24 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from mailc.telia.com (root@mailc.telia.com [194.22.190.4]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id JAA25435 for ; Thu, 1 Jan 1998 09:56:17 -0800 (PST) (envelope-from girgen@partitur.se) Received: from d1o62.telia.com (root@d1o62.telia.com [195.198.198.241]) by mailc.telia.com (8.8.8/8.8.5) with ESMTP id SAA26315; Thu, 1 Jan 1998 18:56:12 +0100 (MET) Received: from partitur.se (t2o62p24.telia.com [195.198.198.84]) by d1o62.telia.com (8.8.5/8.8.5) with ESMTP id SAA27105; Thu, 1 Jan 1998 18:56:11 +0100 (MET) Message-ID: <34ABD8A0.EA585392@partitur.se> Date: Thu, 01 Jan 1998 18:55:44 +0100 From: Palle Girgensohn Organization: Partitur X-Mailer: Mozilla 4.04 [en] (X11; I; FreeBSD 2.2.5-STABLE i386) MIME-Version: 1.0 To: Doug White CC: freebsd-questions@FreeBSD.ORG Subject: Re: unattended dump? References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Hi Doug, Doug White wrote: > > On Wed, 31 Dec 1997, Palle Girgensohn wrote: > > > Hi! > > > > A few Qs about dump: > > > > I'd like to use dump from crontab. What happens when a tape shift is > > required? If I start a dump from the prompt, I can't detach the process > > (i.e. no &), or it will stop saying "[1] + Suspended (tty output) > > dump". When running it from cron, this seems to work, as long as there > > is no need for operator intervention. > > The process will probably stick up since it has no connected tty (unless > dump can handle the ENOTTY error). > Do you mean that it will stick up even if it is run from cron? In this case, how do I best run unattended dumps? As a script from the console, that wait until a certain time during the night? > > After about four gigs, I get write errors. The tape is a Travan 4/8 GB, > > and this leads me to believe that the recorder has reached tape end, > > which is odd, 'cause I believe it has hardware compression. Can dump > > give me a false error code, or is it write error? > > If the end-of-media indicator on the tape is bad it could cause problems. > But you probably are at tape end. > I've tried this with more than one tape, and the result is the same. 4GB into the tape, I get write error. Obviously, I hit the tape end. The model is a Seagate Hornet CTT8000. I have read the manual, and from what I can comprehend, there's no built-in hardware compression. Still, Seagate present fact & figures on how much it stores with hardware compression. odd... Anyway, I guess 4GB is the limit, unless there's some way to do software compression. I guess 'tar z...' might work, but I like dump a lot better than tar... Is there any way to fix the end-of-media indicator on the tape? I use 'dump 0uabf 64 /dev/nrst0' and get the following: DUMP: 57.03% done, finished in 0:22 DUMP: write error 1048256 blocks into volume 1 DUMP: Do you want to restart?: ("yes" or "no") I'd rather have the option to continue on a new tape. > > > > The tape station is a Seagate Travan something. Shows up as: > > > (ahc0:5:0): "CONNER CTT8000-S 1.07" type 1 removable SCSI 2 > > > st0(ahc0:5:0): Sequential-Access density code 0x45, drive empty > > at startup. > > > > btw, my backup commands look like: > > > > dump 0ubf 64 /dev/nrst0 /usr > > try adding the `a' option: > > dump 0aubf ... > > This way the dump will stop at tape end and ask for another tape. Sorry, I remebered wrong. I do use the 'a' option. Regards, Palle From owner-freebsd-questions Thu Jan 1 10:07:00 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id KAA26040 for questions-outgoing; Thu, 1 Jan 1998 10:07:00 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from jupiter.neptune.net (ns2.neptune.net [204.107.103.2]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id KAA25996 for ; Thu, 1 Jan 1998 10:06:56 -0800 (PST) (envelope-from doug@mailhost.neptune.net) Received: (from doug@localhost) by jupiter.neptune.net (8.7.5/8.7.3) id KAA06934; Thu, 1 Jan 1998 10:05:00 -0800 (PST) Date: Thu, 1 Jan 1998 10:05:00 -0800 (PST) Message-Id: <199801011805.KAA06934@jupiter.neptune.net> To: questions@freebsd.org From: Doug Jolley Subject: Printer selection Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I want to purchase a printer. I know that whatever I get will probably come with a Windoze driver. However, I want to make sure what I get is going to be compatible with FreeBSD. What should I keep in mind in making my selection. Thanks for any input. ... doug _____________________________________________________________________ Doug Jolley mailto://doug@bigwheel.net http://www.bigwheel.net Don't bogart that file, my friend. Net it over to me. --------------------------------------------------------------------- From owner-freebsd-questions Thu Jan 1 10:09:27 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id KAA26232 for questions-outgoing; Thu, 1 Jan 1998 10:09:27 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from emerald.accessv.com (emerald.accessv.com [206.221.248.8]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id KAA26223 for ; Thu, 1 Jan 1998 10:09:25 -0800 (PST) (envelope-from grobin@accessv.com) Received: from accessv.com (port183-87.accessv.com [209.50.87.183]) by emerald.accessv.com (8.8.5/8.8.5) with ESMTP id NAA00715; Thu, 1 Jan 1998 13:07:21 -0500 Message-ID: <34ABDB90.A2BDC76C@accessv.com> Date: Thu, 01 Jan 1998 13:08:16 -0500 From: Geoffrey Robinson Reply-To: grobin@accessv.com X-Mailer: Mozilla 4.03 [en] (Win95; U) MIME-Version: 1.0 To: Rudy Gireyev CC: questions@freebsd.org Subject: Re: Can't Access Apache Manual Files References: <19980101025059.4288.rocketmail@send1a.yahoomail.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I added the path /usr/apache/man to MANPATH in my .login file but man still doesn't have any apache data. I also tried man while my current directory was /usr/apache/man but it didn't work either. I'm afraid I know very little about how the man system works. -Geoff Rudy Gireyev wrote: > > 1. You can either cd to the directory and do man from there. > 2. Include the apache man directory in your man PATH. > See man man for exact indtruction > Rudy > > ---Geoffrey Robinson wrote: > > > > Greetings, > > I just installed the apache-current port into the directory > /usr/apache/ > > and discovered that all though there are man files in the Apache > > directory I can't access them through man. Has something gone wrong > > during the install or do I need to add them to man myself somehow? > > > > Thanks. > > -- > > Geoffrey Robinson > > grobin@accessv.com > > Oakville, Ontario, Canada. > > > > _________________________________________________________ > DO YOU YAHOO!? > Get your free @yahoo.com address at http://mail.yahoo.com From owner-freebsd-questions Thu Jan 1 12:02:55 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id MAA04407 for questions-outgoing; Thu, 1 Jan 1998 12:02:55 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from alpha.sea-to-sky.net (sreid@sea-to-sky.net [204.244.200.240]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id MAA04402 for ; Thu, 1 Jan 1998 12:02:53 -0800 (PST) (envelope-from sreid@sea-to-sky.net) Received: from localhost (sreid@localhost) by alpha.sea-to-sky.net (8.8.7/8.7.3) with SMTP id MAA28824; Thu, 1 Jan 1998 12:03:14 -0800 Date: Thu, 1 Jan 1998 12:03:14 -0800 (PST) From: Steve Reid To: Michael Graffam cc: questions@FreeBSD.ORG Subject: Re: HACKED (again) In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Thu, 1 Jan 1998 mgraffam@mhv.net wrote: > Upload an evil library, and set the environment that telnetd sets up > to call that lib rather than the ordinary stuffs, the evil lib gives > a root shell. Hmm.. this implies ELF, so I dont think FreeBSD would > be vulnerable to this attack: This did affect FreeBSD and most other Unixes. It was fixed a couple of years ago, I think sometime between the 2.0.5 and 2.1.0 releases. I wouldn't worry about it today. > Once root is attained, much cloaking can be done. One can modify the 'ps' > program to hide processes, along with modified netcat programs, etc. There > is a common package in the hacker world called the 'root kit' .. it is a > collection of modified utils that do exactly that: hide your existance. BSD-derived Unixes have features to prevent such cloaking, by preventing everyone (even root) from changing important data. These features have to be specifically enabled. In short: set the "immutable" flag on all important binaries and scripts (see "man chflags") and run the system with securelevel set non-zero. The immutable files then can't be modified, and the immutable flag can't be removed except by taking the system down to single-user mode. From owner-freebsd-questions Thu Jan 1 12:10:57 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id MAA04786 for questions-outgoing; Thu, 1 Jan 1998 12:10:57 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from zippy.dyn.ml.org (spain-12.ppp.hooked.net [206.169.228.12]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id MAA04777 for ; Thu, 1 Jan 1998 12:10:53 -0800 (PST) (envelope-from garbanzo@hooked.net) Received: from localhost (garbanzo@localhost) by zippy.dyn.ml.org (8.8.8/8.8.7) with SMTP id MAA00507; Thu, 1 Jan 1998 12:11:48 -0800 (PST) X-Authentication-Warning: zippy.dyn.ml.org: garbanzo owned process doing -bs Date: Thu, 1 Jan 1998 12:11:47 -0800 (PST) From: Alex X-Sender: garbanzo@zippy.dyn.ml.org To: Shoma & Ash Yadav cc: Norman C Rice , questions@FreeBSD.ORG Subject: Re: changing screen res in X In-Reply-To: <01bd16a0$2c73b1c0$36cd15a5@area51.singnet.com.sg> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Thu, 1 Jan 1998, Shoma & Ash Yadav wrote: > Norman / Alex, > I have tried using the S3 server but that bombs out with the following > errors ... > > S3V: PCI: unknown ( please report), ID 0x88c1 rev 0, Linear FB@0x40000000 > S3V: Unknown S3 Chipset: chip_id = 0xc1 rev.1 Well if you're sure it has an S3 chip in it, then go ahead and e-mail the guys who work on XFree. (their web site is at www.xfree86.org) - alex From owner-freebsd-questions Thu Jan 1 12:37:15 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id MAA06172 for questions-outgoing; Thu, 1 Jan 1998 12:37:15 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from mhv.net (root@spice.mhv.net [199.0.0.21]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id MAA06167 for ; Thu, 1 Jan 1998 12:37:12 -0800 (PST) (envelope-from mgraffam@mhv.net) From: mgraffam@mhv.net Received: from localhost (qripto@port108.mhv.net [206.229.41.36]) by mhv.net (8.8.5/8.7.3) with SMTP id PAA07278; Thu, 1 Jan 1998 15:37:03 -0500 Date: Thu, 1 Jan 1998 15:31:28 -0500 (EST) X-Sender: qripto@localhost To: Steve Hovey cc: questions@FreeBSD.ORG Subject: Re: HACKED (again) In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk -----BEGIN PGP SIGNED MESSAGE----- On Thu, 1 Jan 1998, Steve Hovey wrote: > I personally dont trust ssh - I have no other reason not to trust it than > that I suffered a root incursion once shortly after installing it - since > it was the last thing in, I did not reinstall it when I rebuilt the > system. I dont think this is necessarily a problem with ssh. Ssh's security can be circumvented through the insecurity of other things that are running, such as ftp. While I havent looked over every line of ssh source, what I have seen shows good technique against programming glitches that allow root access through broken suid programs, and the crypto looks fine when compared against other (trusted) implementations. Michael J. Graffam (mgraffam@mhv.net) http://www.mhv.net/~mgraffam -- Philosophy, Religion, Computers, Crypto, etc "Enlightenment is man's emergence from his self-incurred immaturity. Immaturity is the inability to use one's own understanding without the guidance of another. . .Sapere aude! Have the courage to use your own understanding!" - Immanuel Kant "What is Enlightenment?" -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 5.0i for non-commercial use Charset: noconv iQCVAwUBNKv9JQKEiLNUxnAfAQFhqgP9GAWbMZ+F1/dx634ia2suM3A++O59vDo3 n5tQZq6sCOR4Sa6tDdhxNnR60XVWXQ4MESHut/FuyI19ncq3AvBxrp489OU9C5Mx rNTtbqFX2zHpxgUQo53RiGO00aPCsZSr54DySSRmv65XiT8WBbRT/Ty9p+80hjH7 9XDLgm0Dmhw= =RcAE -----END PGP SIGNATURE----- From owner-freebsd-questions Thu Jan 1 12:49:33 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id MAA06992 for questions-outgoing; Thu, 1 Jan 1998 12:49:33 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from mhv.net (root@spice.mhv.net [199.0.0.21]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id MAA06986 for ; Thu, 1 Jan 1998 12:49:29 -0800 (PST) (envelope-from mgraffam@mhv.net) From: mgraffam@mhv.net Received: from localhost (qripto@port108.mhv.net [206.229.41.36]) by mhv.net (8.8.5/8.7.3) with SMTP id PAA08781; Thu, 1 Jan 1998 15:49:21 -0500 Date: Thu, 1 Jan 1998 15:43:46 -0500 (EST) X-Sender: qripto@localhost To: Steve Reid cc: Michael Graffam , questions@FreeBSD.ORG Subject: Re: HACKED (again) In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk -----BEGIN PGP SIGNED MESSAGE----- On Thu, 1 Jan 1998, Steve Reid wrote: > On Thu, 1 Jan 1998 mgraffam@mhv.net wrote: > > Upload an evil library, and set the environment that telnetd sets up > > to call that lib rather than the ordinary stuffs, the evil lib gives > > a root shell. Hmm.. this implies ELF, so I dont think FreeBSD would > > be vulnerable to this attack: > > This did affect FreeBSD and most other Unixes. It was fixed a couple of > years ago, I think sometime between the 2.0.5 and 2.1.0 releases. I > wouldn't worry about it today. Ah, ok it did affect FreeBSD .. ok. I knew that it was patched everywhere by now, but the original poster said that his system had been hacked a few OS revisions ago, so I thought that this might apply. > BSD-derived Unixes have features to prevent such cloaking, by preventing > everyone (even root) from changing important data. These features have > to be specifically enabled. In short: set the "immutable" flag on all > important binaries and scripts (see "man chflags") and run the system > with securelevel set non-zero. The immutable files then can't be > modified, and the immutable flag can't be removed except by taking the > system down to single-user mode. Yeah, this might be true (I havent looked into the mechanisms of this, are we sure that an attacker can't modify the files through an indirect means?), but as you note these measures need to be specifically enabled and I doubt many people enable such features.. so, on the average system where root privledges can attained in the first place, these options are probably not configured. However, I dont see how this will necessarily help you against files that need to get changed, just as log files and utmp, unless the system just makes an artificial distinction between legitimate changes to the file and human-specified changes.. in which case I'm quite sure that a clever attacker could trick the ever-stupid computer. However for bins such as ps and netstat, you are absolutably correct.. I still prefer tripwire or a similar set up, however because a determined attacker could probably modifiy the disk itself, and while the odds on this being useful for implementing an evil ps or netcat are slim at best, it still leaves me suspicious. This is a good point though, it might be wise to start shipping FreeBSD with important files locked up as the default. Michael J. Graffam (mgraffam@mhv.net) http://www.mhv.net/~mgraffam -- Philosophy, Religion, Computers, Crypto, etc "Enlightenment is man's emergence from his self-incurred immaturity. Immaturity is the inability to use one's own understanding without the guidance of another. . .Sapere aude! Have the courage to use your own understanding!" - Immanuel Kant "What is Enlightenment?" -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 5.0i for non-commercial use Charset: noconv iQCVAwUBNKwABwKEiLNUxnAfAQGoHAP/Qj3pP0hrYhQFJSf4q1tq1l/gK47e8Kk9 fwQPQmOVxZKMXY4srAEHykW+gULV1WwzxdbTh5afca4BIvz7I5CVeEavW1L20Gzc 11lO4a47S0XPH5ZT+X+BAyV+RHNVJxQ3C9QdBma8dVbXnmxVDIEG4bN22RjSgU5f 03YvQ8Hwi/g= =ULg9 -----END PGP SIGNATURE----- From owner-freebsd-questions Thu Jan 1 12:58:09 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id MAA07490 for questions-outgoing; Thu, 1 Jan 1998 12:58:09 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from proxy4.ba.best.com (root@proxy4.ba.best.com [206.184.139.15]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id MAA07483 for ; Thu, 1 Jan 1998 12:58:05 -0800 (PST) (envelope-from bsampley@best.com) Received: from bsampley.my.domain (stk-pm1-2-2.dialup.slip.net [207.171.231.2]) by proxy4.ba.best.com (8.8.8/8.8.BEST) with SMTP id MAA17358; Thu, 1 Jan 1998 12:57:12 -0800 (PST) Date: Thu, 1 Jan 1998 12:54:58 -0800 (PST) From: Burton Sampley X-Sender: bsampley@bsampley.my.domain To: Doug Jolley cc: questions@freebsd.org Subject: Re: Printer selection In-Reply-To: <199801011805.KAA06934@jupiter.neptune.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk -----BEGIN PGP SIGNED MESSAGE----- Doug, This a difficult question to answer because there are so many "depends". It depends on: 1. Where will you be using it (work or home)? 2. Who's paying for it? (you or work)? 3. What's the primary purpose (graphics, text, typesetting, etc.)? If it's for work (and they're paying for it :-) ) go for a laser printer which supports postscript natively. If it's for home and you don't want to spend a truck load of cash, check out http://www.cs.wisc.edu/~ghost/index.html for a list of printers supported by the latest version of ghostscript. If you're going to use ghostscript I would suggest installing apsfilter from the ports collection. It does a good job of taking the pain out of setting up print services. Personally, I use a HP DeskJet 870 Cse with the cdj850 'driver' for ghostscript 5.03 and apsfilter. I'm very satisfied with both. Hope this helps. - - burton - - --------------- Burton Sampley bsampley@best.com or bsampley@haywire.csuhayward.edu PGP key available at http://www.best.com/~bsampley/pgp.html On Thu, 1 Jan 1998, Doug Jolley wrote: > Date: Thu, 1 Jan 1998 10:05:00 -0800 (PST) > From: Doug Jolley > To: questions@freebsd.org > Subject: Printer selection > > I want to purchase a printer. I know that whatever I get will > probably come with a Windoze driver. However, I want to make > sure what I get is going to be compatible with FreeBSD. What > should I keep in mind in making my selection. Thanks for any > input. > > ... doug > _____________________________________________________________________ > Doug Jolley mailto://doug@bigwheel.net http://www.bigwheel.net > Don't bogart that file, my friend. Net it over to me. > --------------------------------------------------------------------- > -----BEGIN PGP SIGNATURE----- Version: 2.6.2 iQCVAwUBNKwCqXt2O8KJtMdBAQEBWgQAnmme7k3xXS0dhsLRdmTRVJJkG2rTIp26 lkoMVbCorNQWmsLsIowJmdLCa5zIzGzN6uEw2WhYaA2ro2NawGUvaQ3wU/wXbmIT 4qY/SGIrsQkVmReOdhrNVlmCajsLtDBAu9/UGPykuKC9uZKCeaHC356lGeaklxAx tRZEAiqB4mA= =MKJE -----END PGP SIGNATURE----- From owner-freebsd-questions Thu Jan 1 13:02:35 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id NAA07850 for questions-outgoing; Thu, 1 Jan 1998 13:02:35 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from prefetch.san.rr.com (ns1.san.rr.com [204.210.0.2]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id NAA07835 for ; Thu, 1 Jan 1998 13:02:28 -0800 (PST) (envelope-from Studded@dal.net) Received: from dal.net (dt051n19.san.rr.com [204.210.32.25]) by prefetch.san.rr.com (8.8.7/8.8.8) with ESMTP id NAA22048; Thu, 1 Jan 1998 13:01:47 -0800 (PST) Message-ID: <34AC043C.A270AD3E@dal.net> Date: Thu, 01 Jan 1998 13:01:48 -0800 From: Studded X-Mailer: Mozilla 4.04 [en] (X11; I; FreeBSD 2.2.5-STABLE i386) MIME-Version: 1.0 To: grobin@accessv.com CC: questions@freebsd.org Subject: Re: Can't Access Apache Manual Files References: <19980101025059.4288.rocketmail@send1a.yahoomail.com> <34ABDB90.A2BDC76C@accessv.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Geoffrey Robinson wrote: > > I added the path /usr/apache/man to MANPATH in my .login file but man > still doesn't have any apache data. I also tried man while my current > directory was /usr/apache/man but it didn't work either. I'm afraid I > know very little about how the man system works. With all due respect, you were already offered the solution that will save you the most grief, namely "use the port." You should back up any configuration files that you have already worked on, delete every trace of the apache that you installed and install it again from the ports collection. One excellent example of why the ports collection is a good idea is that a patch for a recently uncovered security flaw in apache was applied the same day it was made available. You have a whole team of people looking out for you that are trying to make your life easier, take advantage of that. :) Good luck, Doug From owner-freebsd-questions Thu Jan 1 13:10:12 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id NAA08363 for questions-outgoing; Thu, 1 Jan 1998 13:10:12 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from proxy3.ba.best.com (root@proxy3.ba.best.com [206.184.139.14]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id NAA08355 for ; Thu, 1 Jan 1998 13:10:05 -0800 (PST) (envelope-from bsampley@best.com) Received: from bsampley.my.domain (stk-pm1-2-2.dialup.slip.net [207.171.231.2]) by proxy3.ba.best.com (8.8.8/8.8.BEST) with SMTP id NAA14387 for ; Thu, 1 Jan 1998 13:08:03 -0800 (PST) Date: Thu, 1 Jan 1998 13:06:55 -0800 (PST) From: Burton Sampley X-Sender: bsampley@bsampley.my.domain To: questions@FreeBSD.ORG Subject: Re: ssh trust (was Re: HACKED (again)) In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk > Given that the only secure machine is one turned off, I think you're > better off running ssh than not. My definition of a completely secure computer: 1. Disconnected from all networks (including PG & E, or your local power company) 2. Secured in 6 feet of cement. 3. No I/O of any kind. It sure is secure, but nobody can use it! - burton - From owner-freebsd-questions Thu Jan 1 13:14:10 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id NAA08667 for questions-outgoing; Thu, 1 Jan 1998 13:14:10 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from radford.i-plus.net (root@NS.i-Plus.net [208.24.67.2]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id NAA08659 for ; Thu, 1 Jan 1998 13:14:07 -0800 (PST) (envelope-from rewt@i-Plus.net) Received: from b.nu (old@b.nu [208.24.67.58]) by radford.i-plus.net (8.8.8/8.8.5) with SMTP id QAA21887; Thu, 1 Jan 1998 16:13:26 -0500 (EST) Message-ID: <01f501bd16fb$1c649c80$3a4318d0@b.nu> From: "Troy Settle" To: "Alex" , "Shoma & Ash Yadav" Cc: "Norman C Rice" , Subject: Re: changing screen res in X Date: Thu, 1 Jan 1998 16:20:35 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 4.72.2106.4 X-MimeOLE: Produced By Microsoft MimeOLE V4.72.2106.4 Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk From: Alex >On Thu, 1 Jan 1998, Shoma & Ash Yadav wrote: > >> Norman / Alex, >> I have tried using the S3 server but that bombs out with the following >> errors ... >> >> S3V: PCI: unknown ( please report), ID 0x88c1 rev 0, Linear FB@0x40000000 >> S3V: Unknown S3 Chipset: chip_id = 0xc1 rev.1 > >Well if you're sure it has an S3 chip in it, then go ahead and e-mail the >guys who work on XFree. (their web site is at www.xfree86.org) Looks like you might be using the wrong server... there is a difference between S3 and S3V From owner-freebsd-questions Thu Jan 1 13:23:41 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id NAA09435 for questions-outgoing; Thu, 1 Jan 1998 13:23:41 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from proxyb2.san.rr.com (proxyb2-atm.san.rr.com [204.210.0.11]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id NAA09424 for ; Thu, 1 Jan 1998 13:23:38 -0800 (PST) (envelope-from Studded@dal.net) Received: from dal.net (dt051n19.san.rr.com [204.210.32.25]) by proxyb2.san.rr.com (8.8.7/8.8.8) with ESMTP id NAA10595; Thu, 1 Jan 1998 13:23:00 -0800 (PST) Message-ID: <34AC0935.974F0C72@dal.net> Date: Thu, 01 Jan 1998 13:23:01 -0800 From: Studded X-Mailer: Mozilla 4.04 [en] (X11; I; FreeBSD 2.2.5-STABLE i386) MIME-Version: 1.0 To: Skip Watson CC: freebsd-questions@FreeBSD.ORG Subject: Re: long login names References: <259ea977.u8t20e.8e6b1-freebsd@phoenix.aldhfn.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Skip Watson wrote: > > I thought that I had read (rather some time ago) that long login > names were usable. Is it true? If so how do I set it up. We get a lot of > requests from new users for names that are longer than 8 characters. If you run -Current the capacity is built in. Since you're asking the question, I'll assume you're running -Stable. What you want is not impossible, but you will have to do some work to get it. There are parameters you need to change in two files. In /sys/sys/param.h change MAXLOGNAME to 18. In /usr/src/include/utmp.h change UT_NAMESIZE to 16. Now you need to rebuild your entire system using the "make world" approach. Help for this is available on a web page where I rewrote the out of date tutorial that's on www.freebsd.org. The URL is http://home.san.rr.com/freebsd/upgrade.html. Make sure that you change these two values each time you update your sources. The values I have here will give you access to 16 character usernames. Once the make world is complete, you will want to recompile anything that you've installed locally that access wtmp (like sshd and xterm to quote the most common culprits) and any other local package that is having trouble. You will find more info by taking advantage of the mail archives at http://www.freebsd.org/search.html, which is always a good place to start anyway. :) Good luck, Doug From owner-freebsd-questions Thu Jan 1 13:23:49 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id NAA09458 for questions-outgoing; Thu, 1 Jan 1998 13:23:49 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from mail.netcetera.dk (root@sleipner.netcetera.dk [194.192.207.2]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id NAA09453 for ; Thu, 1 Jan 1998 13:23:45 -0800 (PST) (envelope-from leifn@image.dk) Received: (from uucp@localhost) by mail.netcetera.dk (8.8.8/8.8.8) with UUCP id WAA03401 for freebsd-questions@freebsd.org; Thu, 1 Jan 1998 22:21:27 +0100 Received: by swimsuit.swimsuit.roskildebc.dk (0.99.970109) id AA08221; 01 Jan 98 22:20:45 +0100 From: leifn@image.dk (Leif Neland) Date: 01 Jan 98 22:07:15 +0100 Subject: /etc/shutdown.d not in bsd Message-ID: <7a5_9801012220@swimsuit.swimsuit.roskildebc.dk> Organization: Fidonet: UNIX-sysadm søger job To: freebsd-questions@freebsd.org Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Being used to /etc/shutdown.d in SysV, I can't understand BSD can do without it. In sysV, /etc/shutdown.d contains scripts to shutdown system services etc. at shutdown in a proper and orderly way; the scripts are executed in alfabetical order. What would one do to ensure e.g. first the application using the database is shutdown, then the database itself is shutdown. Init, or the shutdown-command sends kill -15 to all running processes, the man says, but it doesn't say in which order. Am I the only one missing a neat way to do it, or do you folks out there never stop your servers? :-) Could, and would somebody implement a sysV-like shutdown.d, just as there exists a dir (or more) to start scripts at startup? I don't want to have to have a special script I have to remember to call instead just shutdown, reboot and halt. Or would this be blasfemous(sp?) against the BSD-belief to do such a sysV-thing? Leif Neland leifn@image.dk --- |Fidonet: Leif Neland 2:234/49 |Internet: leifn@image.dk From owner-freebsd-questions Thu Jan 1 13:37:45 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id NAA10543 for questions-outgoing; Thu, 1 Jan 1998 13:37:45 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from gdi.uoregon.edu (cisco-ts7-line3.uoregon.edu [128.223.150.50]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id NAA10534 for ; Thu, 1 Jan 1998 13:37:39 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Received: from localhost (dwhite@localhost) by gdi.uoregon.edu (8.8.7/8.8.8) with SMTP id NAA22307; Thu, 1 Jan 1998 13:37:24 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Date: Thu, 1 Jan 1998 13:37:23 -0800 (PST) From: Doug White X-Sender: dwhite@localhost Reply-To: Doug White To: sola@sover.net cc: FreeBSD Questions Subject: RE: FreeBSD In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Mon, 29 Dec 1997 sola@sover.net wrote: > does any version of FreeBSD support adaptec 2920 PCI SCSI controller? Yes. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major From owner-freebsd-questions Thu Jan 1 13:38:05 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id NAA10583 for questions-outgoing; Thu, 1 Jan 1998 13:38:05 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from pm02sm.pmm.mci.net (pm02sm.pmm.mci.net [208.159.126.151]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id NAA10569 for ; Thu, 1 Jan 1998 13:38:00 -0800 (PST) (envelope-from Barbee@internetmci.com) Received: from default (usr4-dialup42.mix2.Atlanta.mci.net) by PM02SM.PMM.MCI.NET (PMDF V5.1-10 #27034) with SMTP id <0EM4005JDK9WJH@PM02SM.PMM.MCI.NET> for freebsd-questions@FreeBSD.ORG; Thu, 1 Jan 1998 21:41:58 +0000 (GMT) Received: by localhost with Microsoft MAPI; Thu, 01 Jan 1998 15:37:25 -0800 Date: Thu, 01 Jan 1998 15:37:11 -0800 From: Jerry Barbee Subject: Atapi Zip drive To: "'freebsd-questions@FreeBSD.ORG'" Message-id: <01BD16CB.28957EA0.Barbee@internetmci.com> MIME-version: 1.0 X-Mailer: Microsoft Internet E-mail/MAPI - 8.0.0.4211 Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk I recently purchased an Iomega Zip drive. It is ATAPI floppy. I have downloaded Freebsd 2.2.5, it recognizes it as IOMEGA ZIP 100 in dmesg, but I can't mount it, it says that the device doesn't exist. I was wondering if there was a way to perhaps recompile or something to get support? Aslo, it works in linux by recompiling the kernel with "ATAPI FLOPPY" support on. Thanks, Jason Deja_Q@usa.net From owner-freebsd-questions Thu Jan 1 13:40:20 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id NAA10711 for questions-outgoing; Thu, 1 Jan 1998 13:40:20 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from alpha.sea-to-sky.net (sreid@sea-to-sky.net [204.244.200.240]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id NAA10705 for ; Thu, 1 Jan 1998 13:40:16 -0800 (PST) (envelope-from sreid@sea-to-sky.net) Received: from localhost (sreid@localhost) by alpha.sea-to-sky.net (8.8.7/8.7.3) with SMTP id NAA29136; Thu, 1 Jan 1998 13:41:08 -0800 Date: Thu, 1 Jan 1998 13:41:08 -0800 (PST) From: Steve Reid Reply-To: Steve Reid To: Michael Graffam cc: questions@FreeBSD.ORG Subject: Re: HACKED (again) In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk > > BSD-derived Unixes have features to prevent such cloaking, by preventing > > everyone (even root) from changing important data. > > Yeah, this might be true (I havent looked into the mechanisms of this, > are we sure that an attacker can't modify the files through an indirect > means?) There are indirect ways of doing it, but they can be prevented... An attacker could unmount the filesystem, change it by messing with the disk device, then re-mount it. This only works when securelevel is 1. When securelevel is 2, the disk devices are read-only whether mounted or not. More likely, the attacker would find a system binary or script that is used _before_ securelevel is set, and modify it so that the trojans take over the system as soon as it is rebooted. This is only possible if the sysadmin forgets to "chflags schg" something. Another possibility is that the attacker would trick the system into lowering the securelevel. This means finding a hole in the kernel or init, which is probably a lot harder than finding a hole in a setuid program. All in all, securelevel is a very well thought-out feature of 4.4 BSD. > However, I dont see how this will necessarily help you against files > that need to get changed, just as log files and utmp Log files can be set append-only. I'm not sure about wtmp/utmp. > This is a good point though, it might be wise to start shipping FreeBSD > with important files locked up as the default. It has been a while since I last used FreeBSD; I'm stuck with wimpos95 for the moment. Last time I used it (2.0.5 - 2.1.7), it _did_ have a lot of binaries set immutable, but left securelevel at 0 by default. (OpenBSD on the other hand, sets securelevel to 1 by default, but doesn't set anything immutable. *shrug*) Anyone interested in setting up non-zero securelevel (I think the variable's full name is kern.securelevel, set by sysctl) should read the man pages for init, chflags, sysctl, and probably others. There are probably other sources of info around the web. The freebsd-security list archives might have some info. Securelevel is a good reason to choose *BSD over Linux in any environment where security is a concern. As far as I know, Linux doesn't have any equivalent security features. From owner-freebsd-questions Thu Jan 1 13:45:40 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id NAA11053 for questions-outgoing; Thu, 1 Jan 1998 13:45:40 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from stcgate.statcan.ca (stcgate.statcan.ca [142.206.192.1]) by hub.freebsd.org (8.8.7/8.8.7) with SMTP id NAA11038 for ; Thu, 1 Jan 1998 13:45:36 -0800 (PST) (envelope-from jeays@statcan.ca) Received: (from root@localhost) by stcgate.statcan.ca (8.6.11/8.6.9) id QAA02879 for ; Thu, 1 Jan 1998 16:48:40 -0500 Received: from stcinet.statcan.ca(142.206.128.146) by stcgate via smap (V1.3) id sma002868; Thu Jan 1 21:47:52 1998 Received: from statcan.ca by statcan.ca (SMI-8.6/SMI-SVR4) id QAA05511; Thu, 1 Jan 1998 16:46:36 -0500 Date: Thu, 1 Jan 1998 16:42:42 -0500 (EST) From: Mike Jeays X-Sender: jeays@austral To: questions@freebsd.org Subject: SGML and Jade Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I downloaded the packages sp-1.2.1 and jade-1.0.1 from 2.2.5-RELEASE, and was able to install them without any rude messages. However, I am a total beginner with SGML, having used groff/mm for some time, and lout very recently. I would like to know how to get from an SGML-tagged document, based on a given DTD, to a Postscript file suitable for printing. I don't want to fiddle with the DTD and DSSSL until I can get some simple examples processed. So my questions are :- 1) Are there other packages I need to install? 2) What is a suitable sequence of commands? 3) Are there other successful users of SGML and Jade under FreeBSD? - and on a related topic - 4) How widely used is lout? I was very impressed with the ease of installation, learning curve and high-quality output, but I don't want to invest a lot of time in producing documents with a very unusual tag-set. Thanks in advance! Happy New Year - less than 2 years to 2000! From owner-freebsd-questions Thu Jan 1 14:00:40 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id OAA12092 for questions-outgoing; Thu, 1 Jan 1998 14:00:40 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from gdi.uoregon.edu (cisco-ts7-line3.uoregon.edu [128.223.150.50]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id OAA12085 for ; Thu, 1 Jan 1998 14:00:36 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Received: from localhost (dwhite@localhost) by gdi.uoregon.edu (8.8.7/8.8.8) with SMTP id NAA22373; Thu, 1 Jan 1998 13:59:54 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Date: Thu, 1 Jan 1998 13:59:54 -0800 (PST) From: Doug White X-Sender: dwhite@localhost Reply-To: Doug White To: "Joe \"Marcus\" Clarke" cc: FreeBSD User Questions List Subject: Re: tclsh In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Thu, 1 Jan 1998, Joe "Marcus" Clarke wrote: > I just installed 2.2.5-RELEASE from scratch, and things went flawlessly. > I did it via ftp using a modem...not bad guys! Anyway, after a lot of > configuring and tweaking, I finally needed to run the addgroup command. > Much to my surprise, it didn't work. Turns out, /usr/bin/tclsh didn't > exist. I KNOW I didn't delete it. NEVER touch anything in /usr/bin. > None the less, I had installed tcl8.02, so I simply edited the script (I > touched something in /usr/bin). I'd like to know if this is standard > with 2.2.5, or if the tcl8.02 port deleted it, or what. Also, if this > is a fluke, could someone email me the tclsh that came with > 2.2.5-RELEASE so I can fill the hole? Thanks. That's confirmed; the 2.2.5 bin distribution doesn't have tclsh, but the 2.2.2 one does. I'll submit a bug report. If you use XWindows, you'll have to install the full tcl distribution at some point and that will bring a fresh copy of tclsh with you. In the meantime, you can edit /etc/group directly. Just remember the usernames are separated by commas and NO SPACES! **Next week** you can fetch it from: ftp://gdi.uoregon.edu/pub/tclsh I'm off net until they reopen my dorm on Sunday. :-( Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major From owner-freebsd-questions Thu Jan 1 14:03:16 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id OAA12257 for questions-outgoing; Thu, 1 Jan 1998 14:03:16 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from gdi.uoregon.edu (cisco-ts7-line3.uoregon.edu [128.223.150.50]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id OAA12252 for ; Thu, 1 Jan 1998 14:03:10 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Received: from localhost (dwhite@localhost) by gdi.uoregon.edu (8.8.7/8.8.8) with SMTP id NAA22325; Thu, 1 Jan 1998 13:50:45 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Date: Thu, 1 Jan 1998 13:50:45 -0800 (PST) From: Doug White X-Sender: dwhite@localhost Reply-To: Doug White To: Mark Turrin cc: freebsd-questions@FreeBSD.ORG Subject: Re: Tape Backups In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Wed, 31 Dec 1997, Mark Turrin wrote: > > Hi, > > I use to backup my BSD 2.2.2 box to a Apple Network server called slugo > running AIX 4.1.4.0 using the following command: > > rdump -0cfus slugo:/dev/rmt0.1 2200000 /dev/sd0a # / > rdump -0cfus slugo:/dev/rmt0.1 2200000 /dev/sd0s1e # /home > rdump -0cfus slugo:/dev/rmt0.1 2200000 /dev/sd0s1g # /usr > rdump -0cfus slugo:/dev/rmt0.1 2200000 /dev/sd0s1h # /var Oops, no dash. In addiiton, the f and s options are out of date. You should use the a and b options for optimum tape usage. See the dump man page for details. > I used this for over a year and even restored remotely onto a new > hard drive after the original failed. > > > After installing FreeBSD 2.2.5 the commands fail and I get the following > error: > > Unknown arguments to dump: 2200000 /dev/sd0a > Unknown arguments to dump: 2200000 /dev/sd0s1e > Unknown arguments to dump: 2200000 /dev/sd0s1g > Unknown arguments to dump: 2200000 /dev/sd0s1h > > So what command do I need to use to make this work? Try taking the dash off. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major From owner-freebsd-questions Thu Jan 1 14:22:00 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id OAA13223 for questions-outgoing; Thu, 1 Jan 1998 14:22:00 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from gdi.uoregon.edu (cisco-ts7-line3.uoregon.edu [128.223.150.50]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id OAA13217 for ; Thu, 1 Jan 1998 14:21:53 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Received: from localhost (dwhite@localhost) by gdi.uoregon.edu (8.8.7/8.8.8) with SMTP id OAA22573; Thu, 1 Jan 1998 14:21:40 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Date: Thu, 1 Jan 1998 14:21:39 -0800 (PST) From: Doug White X-Sender: dwhite@localhost Reply-To: Doug White To: "Joe \"Marcus\" Clarke" cc: FreeBSD User Questions List Subject: Re: tclsh In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Thu, 1 Jan 1998, Joe "Marcus" Clarke wrote: > I just installed 2.2.5-RELEASE from scratch, and things went flawlessly. > I did it via ftp using a modem...not bad guys! Anyway, after a lot of > configuring and tweaking, I finally needed to run the addgroup command. > Much to my surprise, it didn't work. Turns out, /usr/bin/tclsh didn't > exist. I KNOW I didn't delete it. NEVER touch anything in /usr/bin. > None the less, I had installed tcl8.02, so I simply edited the script (I > touched something in /usr/bin). I'd like to know if this is standard > with 2.2.5, or if the tcl8.02 port deleted it, or what. Also, if this > is a fluke, could someone email me the tclsh that came with > 2.2.5-RELEASE so I can fill the hole? Thanks. After looking into this, it looks like tclsh was dumped since there is nothing in the base distribution that requires any parts of tcl7.5 except the library, and addgroup was supposed to go but wasn't deleted before 2.2.5 was checked out . From what I can tell of the state of the CVS tree at current, it looks like addgroup has been removed. I'll submit the bug report anyway just to confirm. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major From owner-freebsd-questions Thu Jan 1 14:24:36 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id OAA13314 for questions-outgoing; Thu, 1 Jan 1998 14:24:36 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from gdi.uoregon.edu (cisco-ts7-line3.uoregon.edu [128.223.150.50]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id OAA13309 for ; Thu, 1 Jan 1998 14:24:32 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Received: from localhost (dwhite@localhost) by gdi.uoregon.edu (8.8.7/8.8.8) with SMTP id OAA22603; Thu, 1 Jan 1998 14:24:25 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Date: Thu, 1 Jan 1998 14:24:24 -0800 (PST) From: Doug White X-Sender: dwhite@localhost Reply-To: Doug White To: James Higgins cc: freebsd-questions@FreeBSD.ORG Subject: Re: Panasonic CR-563 CD-ROM Drives. In-Reply-To: <34AB4E4C.2F9441B9@bnoc.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Thu, 1 Jan 1998, James Higgins wrote: > Ok, > > I am new to Free-BSD but have set up RedHat and Slackware linux systems > (on this same machine I might add) in the past. > > I have a Panasonic CR-563 cdrom that attaches through a proprietary > Soundblaster interface. I cannot seem to detect it at boot time. > > When installing at the "boot: " prompt I specify -c then enter visual > mode. Disable all hardware I know that is not present in my machine, > SCSI cards and Ethernet cards (it is a home machine) and press enter on > the Matsushita/Panasonic CD-Rom device. > > I change the I/O address to 0x630. Windows 95 shows the device at 0x630 > and linux also detects the drive at 0x630. Kernel parameter in linux is > "sbpcd=0x630,LaserMate" if that means anything to anyone. Then I save > the userconfig parameters and continue booting. Did you set the interrupt? > The drive light flashes like the drive is read, but when I select it as > my installation media I get the now infamous "No CDROM devices found.... > blah blah blah" error. I can switch to virtual console 2 and see the > line: "DEBUG: Try at matcdc0 retruns errno 2". Hit scroll lock at the main install menu, then use the arrow keys to scroll back and see the boot prompt. See if matcd0 found anything. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major From owner-freebsd-questions Thu Jan 1 14:30:23 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id OAA13663 for questions-outgoing; Thu, 1 Jan 1998 14:30:23 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from ns1.hiper.net (ns1.hiper.net [207.137.172.11]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id OAA13646 for ; Thu, 1 Jan 1998 14:30:18 -0800 (PST) (envelope-from randyk@ccsales.com) Received: from ntrkcasa (pool38.hiper.net [207.137.172.38]) by ns1.hiper.net (8.8.5/8.8.5) with SMTP id OAA15281; Thu, 1 Jan 1998 14:50:47 GMT Message-Id: <3.0.5.32.19980101143122.02cd5740@ccsales.com> X-Sender: randyk@ccsales.com X-Mailer: QUALCOMM Windows Eudora Pro Version 3.0.5 (32) Date: Thu, 01 Jan 1998 14:31:22 -0800 To: mgraffam@mhv.net, Steve Hovey From: "Randy A. Katz" Subject: Re: HACKED (again) Cc: questions@FreeBSD.ORG In-Reply-To: References: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk How do they get that kind of control with ftp? Are there standard exploits? I had removed all anonymous access to that box...guess that wasn't it, eh? > >I dont think this is necessarily a problem with ssh. Ssh's security can >be circumvented through the insecurity of other things that are running, >such as ftp. > >While I havent looked over every line of ssh source, what I have seen >shows good technique against programming glitches that allow root access >through broken suid programs, and the crypto looks fine when compared >against other (trusted) implementations. > From owner-freebsd-questions Thu Jan 1 14:31:19 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id OAA13715 for questions-outgoing; Thu, 1 Jan 1998 14:31:19 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from freefall.freebsd.org (freefall.FreeBSD.ORG [204.216.27.21]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id OAA13710 for ; Thu, 1 Jan 1998 14:31:17 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Received: from gdi.uoregon.edu (cisco-ts7-line3.uoregon.edu [128.223.150.50]) by freefall.freebsd.org (8.8.6/8.8.5) with ESMTP id OAA07317 for ; Thu, 1 Jan 1998 14:26:24 -0800 (PST) Received: from localhost (dwhite@localhost) by gdi.uoregon.edu (8.8.7/8.8.8) with SMTP id OAA22621; Thu, 1 Jan 1998 14:31:05 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Date: Thu, 1 Jan 1998 14:31:04 -0800 (PST) From: Doug White X-Sender: dwhite@localhost Reply-To: Doug White To: Dave Eldenburg cc: freebsd-questions@freebsd.com Subject: Re: help with a new web sight In-Reply-To: <199801011736.KAA25907@ez0.ezlink.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Thu, 1 Jan 1998, Dave Eldenburg wrote: > Hi all, > > I just got my system up and on-line. I've installed apache and we > put our first web pages up. From the local network everything looks > fine. When anyone tries to access our system from the outside world > the jpg file we use as a background stalls out before it can be > completely retrieved. It's not real large, about 40k. I'm using > kernel ppp 2.2 through an adtran express external isdn modem. > Freebsd has been just great so far, this is the first real problem > I've encountered. Anyone have any idea what's going on? You can try > my site at www.tgi.com. There's not much there but it's a start. It worked fine for me. The background takes **way** to long to load over a 28.8 modem, though. See if you can shrink it to less than 5k. Also try disabling tcp extensions in /etc/rc.conf and see if that helps. A traceroute from me to you has an invalid network number in there (192.168.*.*) upstream from you. If you run a traceroute and see it, you should bother your ISP that they are violating standards. gdi,ttyp5,~,11>traceroute www.tgi.com traceroute to deathstar.tgi.com (199.45.150.242), 30 hops max, 40 byte packets 1 cisco-ts7 (128.223.150.47) 134.990 ms 125.607 ms 128.682 ms 2 cisco1-gw (128.223.150.1) 128.248 ms 124.572 ms 119.043 ms 3 cisco7-gw (128.223.3.7) 128.334 ms 129.596 ms 217.664 ms 4 eugene-hub.nero.net (207.98.66.11) 128.371 ms 128.415 ms 119.061 ms 5 eugene-isp.nero.net (207.98.64.6) 119.099 ms 128.677 ms 119.150 ms 6 166.48.14.5 (166.48.14.5) 139.104 ms 138.758 ms 139.131 ms 7 core5.SanFrancisco.mci.net (204.70.4.85) 139.802 ms 138.573 ms 139.144 ms 8 core1-hssi-2.Sacramento.mci.net (204.70.1.146) 139.058 ms 138.563 ms 139.439 ms 9 border3-fddi-0.Sacramento.mci.net (204.70.164.19) 138.752 ms 138.813 ms 138.847 ms 10 204.70.167.74 (204.70.167.74) 289.082 ms 228.708 ms 209.122 ms 11 gw58.boulder.co.coop.net (199.45.132.172) 179.095 ms 168.580 ms 189.729 ms 12 199.45.133.250 (199.45.133.250) 208.742 ms 238.776 ms 308.736 ms ****** here 13 192.168.2.1 (192.168.2.1) 249.068 ms 298.770 ms 268.488 ms ****** This is in violation of RFC 1597; 192.168.*.* is reserved 14 pm2.ezlink.com (199.45.150.20) 259.334 ms 217.972 ms 189.134 ms 15 deathstar.tgi.com (199.45.150.242) 289.706 ms 288.623 ms 329.153 ms Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major From owner-freebsd-questions Thu Jan 1 14:32:28 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id OAA13861 for questions-outgoing; Thu, 1 Jan 1998 14:32:28 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from mhv.net (root@spice.mhv.net [199.0.0.21]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id OAA13855 for ; Thu, 1 Jan 1998 14:32:25 -0800 (PST) (envelope-from mgraffam@mhv.net) From: mgraffam@mhv.net Received: from localhost (qripto@port108.mhv.net [206.229.41.36]) by mhv.net (8.8.5/8.7.3) with SMTP id RAA21470; Thu, 1 Jan 1998 17:32:17 -0500 Date: Thu, 1 Jan 1998 17:26:43 -0500 (EST) X-Sender: qripto@localhost To: Steve Reid cc: Michael Graffam , questions@FreeBSD.ORG Subject: Re: HACKED (again) In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk -----BEGIN PGP SIGNED MESSAGE----- On Thu, 1 Jan 1998, Steve Reid wrote: > More likely, the attacker would find a system binary or script that is > used _before_ securelevel is set, and modify it so that the trojans take > over the system as soon as it is rebooted. This is only possible if the > sysadmin forgets to "chflags schg" something. Yeah, _that_ is a clever little idea. I wouldnt have thought of that one :) > Another possibility is that the attacker would trick the system into > lowering the securelevel. This means finding a hole in the kernel or > init, which is probably a lot harder than finding a hole in a setuid > program. Yeah, I'd consider this a dead end.. > > However, I dont see how this will necessarily help you against files > > that need to get changed, just as log files and utmp > > Log files can be set append-only. I'm not sure about wtmp/utmp. Yeah, but append-only mode isnt necessarily the greatest either.. but this is really a different issue.. one that centers around how much one trusts the audit trails. > Anyone interested in setting up non-zero securelevel (I think the > variable's full name is kern.securelevel, set by sysctl) should read the > man pages for init, chflags, sysctl, and probably others. There are > probably other sources of info around the web. The freebsd-security list > archives might have some info. Yeah, there is another resource that covers this.. I wish I still had the URL.. it was a list of links and dox on which programs and features are of concern for site security. I'll run a search and see if I can re-find it. > Securelevel is a good reason to choose *BSD over Linux in any > environment where security is a concern. As far as I know, Linux doesn't > have any equivalent security features. I dont think there is a direct counterpart in Linux to securelevel either, but I think that one could set things up to act like various securelevel states. Linux's ext2 filesystem has security stuff too. The chattr command will flip the bits for a file's attributes. You can set it to stuff like append-only writes, locked access (like immutability), secure deletion (blocks are zeroed out if the file is erased) and there are hooks in the code for automatic compression and I think crypto as well (but these features arent in the stock ext2, as far as I know.. I havent checked in awhile).. so the file attributes are similar.. though I havent really put Linux's attribs to the flame and tested them.. I know that BSD's work. So, if I had to pick a system, I'd pick BSD too for security.. Michael J. Graffam (mgraffam@mhv.net) http://www.mhv.net/~mgraffam -- Philosophy, Religion, Computers, Crypto, etc "Enlightenment is man's emergence from his self-incurred immaturity. Immaturity is the inability to use one's own understanding without the guidance of another. . .Sapere aude! Have the courage to use your own understanding!" - Immanuel Kant "What is Enlightenment?" -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 5.0i for non-commercial use Charset: noconv iQCVAwUBNKwYJwKEiLNUxnAfAQHs4gP/eOs9tp32KGJDTeIcMpfy4R3NBDpPjGKt /vUX6GTW4gZO9AfUI4uqoEOriA1an/L1KePxbOz8JwcGNdmEaZ02P5KkWQByeu9Z WCHSXQ1sPxZRKqPUQR8gXSUJwmoWA4iG92mSB10ad/hm33iUwidL/Es1OQzf8nh4 fcxTXvhjonI= =Gh1w -----END PGP SIGNATURE----- From owner-freebsd-questions Thu Jan 1 14:37:29 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id OAA14130 for questions-outgoing; Thu, 1 Jan 1998 14:37:29 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from osiris.ie-eg.com ([194.79.98.39]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id OAA14115 for ; Thu, 1 Jan 1998 14:37:08 -0800 (PST) (envelope-from root@isis.dynip.com) Received: from isis (localhost.ie-eg.com [127.0.0.1]) by osiris.ie-eg.com (8.8.8/8.8.8) with SMTP id AAA06675 for ; Fri, 2 Jan 1998 00:35:15 +0200 (EET) From: Charlie Roots To: freebsd-questions@freebsd.org Subject: What is a 'passwd.pag' file ? Reply-To: root@isis.dynip.com X-Mailer: KMail [version 0.4.3] Date: Fri, 2 Jan 1998 00:33:36 +0200 MIME-Version: 1.0 Message-Id: <98010200351400.06668@isis> Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Hi there; I got by a file called passwd.pag, does any one know what this this file doing ?? thanks From owner-freebsd-questions Thu Jan 1 14:38:24 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id OAA14226 for questions-outgoing; Thu, 1 Jan 1998 14:38:24 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from gdi.uoregon.edu (cisco-ts7-line3.uoregon.edu [128.223.150.50]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id OAA14215 for ; Thu, 1 Jan 1998 14:38:20 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Received: from localhost (dwhite@localhost) by gdi.uoregon.edu (8.8.7/8.8.8) with SMTP id OAA22633; Thu, 1 Jan 1998 14:38:10 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Date: Thu, 1 Jan 1998 14:38:10 -0800 (PST) From: Doug White X-Sender: dwhite@localhost Reply-To: Doug White To: Palle Girgensohn cc: freebsd-questions@FreeBSD.ORG Subject: Re: unattended dump? In-Reply-To: <34ABD8A0.EA585392@partitur.se> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Thu, 1 Jan 1998, Palle Girgensohn wrote: > > > I'd like to use dump from crontab. What happens when a tape shift is > > > required? If I start a dump from the prompt, I can't detach the process > > > (i.e. no &), or it will stop saying "[1] + Suspended (tty output) > > > dump". When running it from cron, this seems to work, as long as there > > > is no need for operator intervention. > > > > The process will probably stick up since it has no connected tty (unless > > dump can handle the ENOTTY error). > > > > Do you mean that it will stick up even if it is run from cron? As long as it doesn't prompt for a new tape or whatever. If it doesn't require user intervention it should work fine. I should disclaim that I've never tried this :-) > In this case, how do I best run unattended dumps? As a script from the > console, that wait until a certain time during the night? > I've tried this with more than one tape, and the result is the same. 4GB > into the tape, I get write error. Obviously, I hit the tape end. The > model is a Seagate Hornet CTT8000. I have read the manual, and from what > I can comprehend, there's no built-in hardware compression. Still, > Seagate present fact & figures on how much it stores with hardware > compression. odd... Anyway, I guess 4GB is the limit, unless there's > some way to do software compression. I guess 'tar z...' might work, but > I like dump a lot better than tar... Echo. You might bother Seagate on that. You should also check the density codes; I think one of those actually enables the hardware compression. Check the mail archives. > Is there any way to fix the end-of-media indicator on the tape? New tape. > I use 'dump 0uabf 64 /dev/nrst0' and get the following: > > DUMP: 57.03% done, finished in 0:22 > DUMP: write error 1048256 blocks into volume 1 > DUMP: Do you want to restart?: ("yes" or "no") > > I'd rather have the option to continue on a new tape. > > try adding the `a' option: > > Sorry, I remebered wrong. I do use the 'a' option. Odd. In that case, use the B option to list how many blocks fit on a tape. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major From owner-freebsd-questions Thu Jan 1 14:39:57 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id OAA14344 for questions-outgoing; Thu, 1 Jan 1998 14:39:57 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from send1b.yahoomail.com (send1b.yahoomail.com [205.180.60.23]) by hub.freebsd.org (8.8.7/8.8.7) with SMTP id OAA14336 for ; Thu, 1 Jan 1998 14:39:52 -0800 (PST) (envelope-from osiris2002@yahoo.com) Message-ID: <19980101223936.28945.rocketmail@send1b.yahoomail.com> Received: from [194.79.98.39] by send1b; Thu, 01 Jan 1998 14:39:36 PST Date: Thu, 1 Jan 1998 14:39:36 -0800 (PST) From: Charlie Roots Subject: Re: Atapi Zip drive To: Jerry Barbee Cc: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Hi Jerry; Check the script /dev/MAKEDEV you should be able to find a device there to support IOMEGA ZIP drive. then if that device is called zip0 for example you should do a; cd /dev ./MAKEDEV zip0 then make a directory like /iomega then mount the created device on the created directory. greetings. ---Jerry Barbee wrote: > > I recently purchased an Iomega Zip drive. It is ATAPI floppy. I have > downloaded Freebsd 2.2.5, it recognizes it as IOMEGA ZIP 100 in dmesg, but > I can't mount it, it says that the device doesn't exist. I was wondering if > there was a way to perhaps recompile or something to get support? > Aslo, it works in linux by recompiling the kernel with "ATAPI FLOPPY" > support on. > Thanks, > Jason > Deja_Q@usa.net > > == MAY THE FORCE BE WITH YOU. _________________________________________________________ DO YOU YAHOO!? Get your free @yahoo.com address at http://mail.yahoo.com From owner-freebsd-questions Thu Jan 1 14:40:10 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id OAA14479 for questions-outgoing; Thu, 1 Jan 1998 14:40:10 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from gdi.uoregon.edu (cisco-ts7-line3.uoregon.edu [128.223.150.50]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id OAA14372 for ; Thu, 1 Jan 1998 14:40:01 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Received: from localhost (dwhite@localhost) by gdi.uoregon.edu (8.8.7/8.8.8) with SMTP id OAA22638; Thu, 1 Jan 1998 14:39:41 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Date: Thu, 1 Jan 1998 14:39:41 -0800 (PST) From: Doug White X-Sender: dwhite@localhost Reply-To: Doug White To: james cc: freebsd-questions@FreeBSD.ORG Subject: Re: Boot mgr. In-Reply-To: <34ABF5BB.2E9A041C@zombie.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Thu, 1 Jan 1998, james wrote: > What do I need to do to be able to dual boot off two dedicated disks. I > want to have one disk BSD, and the other NT. Any help would be greatly > appreciated. Booteasy, the default one, should work fine. I don't know if it can grok NTFS though. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major From owner-freebsd-questions Thu Jan 1 14:40:33 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id OAA14525 for questions-outgoing; Thu, 1 Jan 1998 14:40:33 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from ns1.hiper.net (ns1.hiper.net [207.137.172.11]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id OAA14502 for ; Thu, 1 Jan 1998 14:40:22 -0800 (PST) (envelope-from randyk@ccsales.com) Received: from ntrkcasa (pool38.hiper.net [207.137.172.38]) by ns1.hiper.net (8.8.5/8.8.5) with SMTP id PAA15291; Thu, 1 Jan 1998 15:00:48 GMT Message-Id: <3.0.5.32.19980101144122.036d9e40@ccsales.com> X-Sender: randyk@ccsales.com X-Mailer: QUALCOMM Windows Eudora Pro Version 3.0.5 (32) Date: Thu, 01 Jan 1998 14:41:22 -0800 To: Doug White , "Joe \"Marcus\" Clarke" From: "Randy A. Katz" Subject: Re: tclsh Cc: FreeBSD User Questions List In-Reply-To: References: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I had this problem and went to /usr/ports/lang/pick your tcl and installed it and it still didn't show up so then I went into the work/tcl*/bin directory and copied in manually to /usr/bin and that did the trick...I assumed that was not the way things were intended to be... Thanx, Randy Katz At 01:59 PM 1/1/98 -0800, Doug White wrote: >On Thu, 1 Jan 1998, Joe "Marcus" Clarke wrote: > >> I just installed 2.2.5-RELEASE from scratch, and things went flawlessly. >> I did it via ftp using a modem...not bad guys! Anyway, after a lot of >> configuring and tweaking, I finally needed to run the addgroup command. >> Much to my surprise, it didn't work. Turns out, /usr/bin/tclsh didn't >> exist. I KNOW I didn't delete it. NEVER touch anything in /usr/bin. >> None the less, I had installed tcl8.02, so I simply edited the script (I >> touched something in /usr/bin). I'd like to know if this is standard >> with 2.2.5, or if the tcl8.02 port deleted it, or what. Also, if this >> is a fluke, could someone email me the tclsh that came with >> 2.2.5-RELEASE so I can fill the hole? Thanks. > >That's confirmed; the 2.2.5 bin distribution doesn't have tclsh, but the >2.2.2 one does. I'll submit a bug report. > >If you use XWindows, you'll have to install the full tcl distribution at >some point and that will bring a fresh copy of tclsh with you. > >In the meantime, you can edit /etc/group directly. Just remember the >usernames are separated by commas and NO SPACES! > >**Next week** you can fetch it from: > >ftp://gdi.uoregon.edu/pub/tclsh > >I'm off net until they reopen my dorm on Sunday. :-( > >Doug White | University of Oregon >Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant >http://gladstone.uoregon.edu/~dwhite | Computer Science Major > > > From owner-freebsd-questions Thu Jan 1 14:42:46 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id OAA14658 for questions-outgoing; Thu, 1 Jan 1998 14:42:46 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from psln1.psln.com (psln.com [206.99.118.101]) by hub.freebsd.org (8.8.7/8.8.7) with SMTP id OAA14649 for ; Thu, 1 Jan 1998 14:42:43 -0800 (PST) (envelope-from dkeller@psln.com) Received: from g6-200 by psln1.psln.com via SMTP (951211.SGI.8.6.12.PATCH1502/951211.SGI.AUTO) id OAA18365; Thu, 1 Jan 1998 14:33:38 -0800 Message-ID: <004001bd170b$0c06e720$703d9bce@g6-200> From: "Daniel \"The Bruce\" Keller" To: "FreeBSD Questions List" , "Jerry Barbee" Subject: Re: Atapi Zip drive Date: Thu, 1 Jan 1998 15:14:39 -0800 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 4.72.2106.4 X-MimeOLE: Produced By Microsoft MimeOLE V4.72.2106.4 Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Hi, on my system my ATAPI Zip drive is detected as a normal hard drive, it is the second disk on the first controller, so wd1. I can mount it by mounting wd1s1. I'm not sure if there is some specific driver for the ATAPI zip drive, but without it I can mount the first disk I put in it, but if I put another disk in I can't mount it. Daniel Keller -----Original Message----- From: Jerry Barbee To: 'freebsd-questions@FreeBSD.ORG' Date: Thursday, January 01, 1998 2:19 PM Subject: Atapi Zip drive >I recently purchased an Iomega Zip drive. It is ATAPI floppy. I have >downloaded Freebsd 2.2.5, it recognizes it as IOMEGA ZIP 100 in dmesg, but >I can't mount it, it says that the device doesn't exist. I was wondering if >there was a way to perhaps recompile or something to get support? >Aslo, it works in linux by recompiling the kernel with "ATAPI FLOPPY" >support on. >Thanks, >Jason >Deja_Q@usa.net > From owner-freebsd-questions Thu Jan 1 14:47:25 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id OAA15015 for questions-outgoing; Thu, 1 Jan 1998 14:47:25 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from gdi.uoregon.edu (cisco-ts7-line3.uoregon.edu [128.223.150.50]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id OAA15008 for ; Thu, 1 Jan 1998 14:47:20 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Received: from localhost (dwhite@localhost) by gdi.uoregon.edu (8.8.7/8.8.8) with SMTP id OAA22661; Thu, 1 Jan 1998 14:46:56 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Date: Thu, 1 Jan 1998 14:46:56 -0800 (PST) From: Doug White X-Sender: dwhite@localhost Reply-To: Doug White To: Leif Neland cc: freebsd-questions@FreeBSD.ORG Subject: Re: /etc/shutdown.d not in bsd In-Reply-To: <7a5_9801012220@swimsuit.swimsuit.roskildebc.dk> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On 1 Jan 1998, Leif Neland wrote: > Being used to /etc/shutdown.d in SysV, I can't understand BSD can do without > it. > > In sysV, /etc/shutdown.d contains scripts to shutdown system services etc. at > shutdown in a proper and orderly way; the scripts are executed in alfabetical > order. Because the system will shut them down for you. When the system is halted, every process is sent a SIGTERM (signal 15). most processes will then exit gracefully. (Some evil ones that mask SIGTERM then get a SIGKILL to finish them off). > What would one do to ensure e.g. first the application using the database is > shutdown, then the database itself is shutdown. 1. exit application 2. issue shutdown command > Init, or the shutdown-command sends kill -15 to all running processes, the man > says, but it doesn't say in which order. All simultaneously, I think. > Am I the only one missing a neat way to do it, or do you folks out there never > stop your servers? :-) We hope we never have to. :-) > Could, and would somebody implement a sysV-like shutdown.d, just as there > exists a dir (or more) to start scripts at startup? I don't want to have to > have a special script I have to remember to call instead just shutdown, reboot > and halt. > Or would this be blasfemous(sp?) against the BSD-belief to do such a > sysV-thing? We've told you three or four times to just use a script that kills the appropriate program(s) then calls shutdown. If you want to implement it, go for it; send patches using send-pr. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major From owner-freebsd-questions Thu Jan 1 14:49:05 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id OAA15198 for questions-outgoing; Thu, 1 Jan 1998 14:49:05 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from gdi.uoregon.edu (cisco-ts7-line3.uoregon.edu [128.223.150.50]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id OAA15183 for ; Thu, 1 Jan 1998 14:49:00 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Received: from localhost (dwhite@localhost) by gdi.uoregon.edu (8.8.7/8.8.8) with SMTP id OAA22666; Thu, 1 Jan 1998 14:48:42 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Date: Thu, 1 Jan 1998 14:48:42 -0800 (PST) From: Doug White X-Sender: dwhite@localhost Reply-To: Doug White To: Jerry Barbee cc: "'freebsd-questions@FreeBSD.ORG'" Subject: Re: Atapi Zip drive In-Reply-To: <01BD16CB.28957EA0.Barbee@internetmci.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Thu, 1 Jan 1998, Jerry Barbee wrote: > I recently purchased an Iomega Zip drive. It is ATAPI floppy. I have > downloaded Freebsd 2.2.5, it recognizes it as IOMEGA ZIP 100 in dmesg, but > I can't mount it, it says that the device doesn't exist. I was wondering if > there was a way to perhaps recompile or something to get support? > Aslo, it works in linux by recompiling the kernel with "ATAPI FLOPPY" > support on. There is no driver for the ATAPI Zip in the releases, but I believe some work is in progress to remedy that. Check the -hackers list archives at http://www.freebsd.org/search.html. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major From owner-freebsd-questions Thu Jan 1 14:58:22 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id OAA16172 for questions-outgoing; Thu, 1 Jan 1998 14:58:22 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from mhv.net (root@spice.mhv.net [199.0.0.21]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id OAA16162 for ; Thu, 1 Jan 1998 14:58:11 -0800 (PST) (envelope-from mgraffam@mhv.net) From: mgraffam@mhv.net Received: from localhost (qripto@port108.mhv.net [206.229.41.36]) by mhv.net (8.8.5/8.7.3) with SMTP id RAA24337; Thu, 1 Jan 1998 17:57:58 -0500 Date: Thu, 1 Jan 1998 17:52:22 -0500 (EST) X-Sender: qripto@localhost To: "Randy A. Katz" cc: mgraffam@mhv.net, Steve Hovey , questions@FreeBSD.ORG Subject: Re: HACKED (again) In-Reply-To: <3.0.5.32.19980101143122.02cd5740@ccsales.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk -----BEGIN PGP SIGNED MESSAGE----- On Thu, 1 Jan 1998, Randy A. Katz wrote: > >I dont think this is necessarily a problem with ssh. Ssh's security can > >be circumvented through the insecurity of other things that are running, > >such as ftp. > How do they get that kind of control with ftp? Are there standard exploits? > I had removed all anonymous access to that box...guess that wasn't it, eh? Well, because ftp's passwords are sent in the clear one can sniff an FTP session to get the account password, and like I said before once they do this..they can change the user's ssh config files to get through ssh. This is a common attack, a friend of mine had his system hacked in exactly this way.. fortunately the attacker was a good natured guy, and emailed his logs and details on the attack to my friend, who then secured ftp. Michael J. Graffam (mgraffam@mhv.net) http://www.mhv.net/~mgraffam -- Philosophy, Religion, Computers, Crypto, etc "Enlightenment is man's emergence from his self-incurred immaturity. Immaturity is the inability to use one's own understanding without the guidance of another. . .Sapere aude! Have the courage to use your own understanding!" - Immanuel Kant "What is Enlightenment?" -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 5.0i for non-commercial use Charset: noconv iQCVAwUBNKweLAKEiLNUxnAfAQFQVQP/Q2EmcKa0NjrC+5+XQf4OFqPK6GrMdEqv fe0tdq0nVqAdYRlf0imPp701i95tTzXN4CiefrJTjX2g84ORSXI7F/ioouy8Vuax CbzQ7NyJNymmvPodMnI0OwdLZAKl+JC6sPooeELWRXkT/yBdAveG2nMt4xKGL6pt 6mhNR3DsnJw= =NUb3 -----END PGP SIGNATURE----- From owner-freebsd-questions Thu Jan 1 15:04:22 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id PAA16718 for questions-outgoing; Thu, 1 Jan 1998 15:04:22 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from germanium.xtalwind.net (germanium.xtalwind.net [205.160.242.5]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id PAA16713 for ; Thu, 1 Jan 1998 15:04:17 -0800 (PST) (envelope-from jack@germanium.xtalwind.net) Received: from localhost (localhost.xtalwind.net [127.0.0.1]) by germanium.xtalwind.net (8.8.8/8.8.7) with SMTP id SAA07073 for ; Thu, 1 Jan 1998 18:04:18 -0500 (EST) Date: Thu, 1 Jan 1998 18:04:17 -0500 (EST) From: jack To: freebsd-questions@freebsd.org Subject: Re: /etc/shutdown.d not in bsd In-Reply-To: <7a5_9801012220@swimsuit.swimsuit.roskildebc.dk> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk On 1 Jan 1998, Leif Neland wrote: > Am I the only one missing a neat way to do it, or do you folks out there never > stop your servers? :-) Under normal circumstances only to upgrade hardware or the operating system. :) Same for workstations. -------------------------------------------------------------------------- Jack O'Neill Finger jacko@diamond.xtalwind.net or jack@xtalwind.net http://www.xtalwind.net/~jacko/pubpgp.html #include for my PGP key. PGP Key fingerprint = F6 C4 E6 D4 2F 15 A7 67 FD 09 E9 3C 5F CC EB CD enriched, vcard, HTML messages > /dev/null -------------------------------------------------------------------------- From owner-freebsd-questions Thu Jan 1 15:12:07 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id PAA17490 for questions-outgoing; Thu, 1 Jan 1998 15:12:07 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from osiris.ie-eg.com ([194.79.98.39]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id PAA17323 for ; Thu, 1 Jan 1998 15:11:31 -0800 (PST) (envelope-from root@isis.dynip.com) Received: from isis (localhost.ie-eg.com [127.0.0.1]) by osiris.ie-eg.com (8.8.8/8.8.8) with SMTP id BAA06947 for ; Fri, 2 Jan 1998 01:10:14 +0200 (EET) From: Charlie Roots To: freebsd-questions@freebsd.org Subject: Where can I get 'boot.flp' for freebsd-current Reply-To: root@isis.dynip.com X-Mailer: KMail [version 0.4.3] Date: Fri, 2 Jan 1998 01:06:38 +0200 MIME-Version: 1.0 Message-Id: <98010201100701.06668@isis> Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Hi there; I intend to buy a new 6 GB drive, and since I upgraded from 2.2.2-RELEASE to 3.0-Current over CVSUP, I can't install the system from the system without having a bootable floppy, so is there a URL for the boot.flp, or I will have to install 2.2.2 then upgrade via cvsup. thanks. From owner-freebsd-questions Thu Jan 1 15:38:03 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id PAA19243 for questions-outgoing; Thu, 1 Jan 1998 15:38:03 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from ns1.hiper.net (ns1.hiper.net [207.137.172.11]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id PAA19230 for ; Thu, 1 Jan 1998 15:37:40 -0800 (PST) (envelope-from randyk@ccsales.com) Received: from ntrkcasa (pool38.hiper.net [207.137.172.38]) by ns1.hiper.net (8.8.5/8.8.5) with SMTP id PAA15338; Thu, 1 Jan 1998 15:58:04 GMT Message-Id: <3.0.5.32.19980101153837.03709100@ccsales.com> X-Sender: randyk@ccsales.com X-Mailer: QUALCOMM Windows Eudora Pro Version 3.0.5 (32) Date: Thu, 01 Jan 1998 15:38:37 -0800 To: Doug White , "Joe \"Marcus\" Clarke" From: "Randy A. Katz" Subject: Re: tclsh Cc: FreeBSD User Questions List In-Reply-To: References: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Has anything replace addgroup? At 02:21 PM 1/1/98 -0800, Doug White wrote: >On Thu, 1 Jan 1998, Joe "Marcus" Clarke wrote: > >> I just installed 2.2.5-RELEASE from scratch, and things went flawlessly. >> I did it via ftp using a modem...not bad guys! Anyway, after a lot of >> configuring and tweaking, I finally needed to run the addgroup command. >> Much to my surprise, it didn't work. Turns out, /usr/bin/tclsh didn't >> exist. I KNOW I didn't delete it. NEVER touch anything in /usr/bin. >> None the less, I had installed tcl8.02, so I simply edited the script (I >> touched something in /usr/bin). I'd like to know if this is standard >> with 2.2.5, or if the tcl8.02 port deleted it, or what. Also, if this >> is a fluke, could someone email me the tclsh that came with >> 2.2.5-RELEASE so I can fill the hole? Thanks. > >After looking into this, it looks like tclsh was dumped since there is >nothing in the base distribution that requires any parts of tcl7.5 except >the library, and addgroup was supposed to go but wasn't deleted before >2.2.5 was checked out . From what I can tell of the state of the CVS tree >at current, it looks like addgroup has been removed. I'll submit the bug >report anyway just to confirm. > >Doug White | University of Oregon >Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant >http://gladstone.uoregon.edu/~dwhite | Computer Science Major > > > From owner-freebsd-questions Thu Jan 1 15:49:07 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id PAA20186 for questions-outgoing; Thu, 1 Jan 1998 15:49:07 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from freefall.freebsd.org (freefall.FreeBSD.ORG [204.216.27.21]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id PAA20180 for ; Thu, 1 Jan 1998 15:49:01 -0800 (PST) (envelope-from dave@tgi.com) Received: from ez0.ezlink.com (root@ez0.ezlink.com [199.45.150.1]) by freefall.freebsd.org (8.8.6/8.8.5) with ESMTP id PAA08533 for ; Thu, 1 Jan 1998 15:44:07 -0800 (PST) Received: from tgi.com (deathstar.tgi.com [199.45.150.242]) by ez0.ezlink.com (8.8.8/8.8.8) with SMTP id QAA16101 for ; Thu, 1 Jan 1998 16:52:51 -0700 Message-Id: <199801012352.QAA16101@ez0.ezlink.com> Received: from discovery.tgi.com [192.190.68.1] by tgi.com [192.190.68.1] with SMTP (MDaemon.v2.6.rA.b6.32-R) for ; Thu, 01 Jan 98 16:45:19 -0700 Comments: Authenticated sender is From: "Dave Eldenburg" To: dwhite@resnet.uoregon.edu, freebsd-questions@freebsd.com Date: Thu, 1 Jan 1998 16:45:18 +0000 MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: Re: help with a new web sight Reply-to: dave@tgi.com Priority: normal References: <199801011736.KAA25907@ez0.ezlink.com> In-reply-to: X-mailer: Pegasus Mail for Win32 (v2.54) X-MDaemon-Deliver-To: freebsd-questions@freebsd.com Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Thanks for the help!!! I will look into all problems mentioned. Dave > On Thu, 1 Jan 1998, Dave Eldenburg wrote: > > > Hi all, > > > > I just got my system up and on-line. I've installed apache and we > > put our first web pages up. From the local network everything looks > > fine. When anyone tries to access our system from the outside world > > the jpg file we use as a background stalls out before it can be > > completely retrieved. It's not real large, about 40k. I'm using > > kernel ppp 2.2 through an adtran express external isdn modem. > > Freebsd has been just great so far, this is the first real problem > > I've encountered. Anyone have any idea what's going on? You can try > > my site at www.tgi.com. There's not much there but it's a start. > > It worked fine for me. The background takes **way** to long to load over > a 28.8 modem, though. See if you can shrink it to less than 5k. > > Also try disabling tcp extensions in /etc/rc.conf and see if that helps. > > A traceroute from me to you has an invalid network number in there > (192.168.*.*) upstream from you. If you run a traceroute and see it, you > should bother your ISP that they are violating standards. > > gdi,ttyp5,~,11>traceroute www.tgi.com > traceroute to deathstar.tgi.com (199.45.150.242), 30 hops max, 40 byte > packets > 1 cisco-ts7 (128.223.150.47) 134.990 ms 125.607 ms 128.682 ms > 2 cisco1-gw (128.223.150.1) 128.248 ms 124.572 ms 119.043 ms > 3 cisco7-gw (128.223.3.7) 128.334 ms 129.596 ms 217.664 ms > 4 eugene-hub.nero.net (207.98.66.11) 128.371 ms 128.415 ms 119.061 ms > 5 eugene-isp.nero.net (207.98.64.6) 119.099 ms 128.677 ms 119.150 ms > 6 166.48.14.5 (166.48.14.5) 139.104 ms 138.758 ms 139.131 ms > 7 core5.SanFrancisco.mci.net (204.70.4.85) 139.802 ms 138.573 ms > 139.144 ms > 8 core1-hssi-2.Sacramento.mci.net (204.70.1.146) 139.058 ms 138.563 ms > 139.439 ms > 9 border3-fddi-0.Sacramento.mci.net (204.70.164.19) 138.752 ms 138.813 > ms 138.847 ms > 10 204.70.167.74 (204.70.167.74) 289.082 ms 228.708 ms 209.122 ms > 11 gw58.boulder.co.coop.net (199.45.132.172) 179.095 ms 168.580 ms > 189.729 ms > 12 199.45.133.250 (199.45.133.250) 208.742 ms 238.776 ms 308.736 ms > ****** here > 13 192.168.2.1 (192.168.2.1) 249.068 ms 298.770 ms 268.488 ms > ****** This is in violation of RFC 1597; 192.168.*.* is reserved > 14 pm2.ezlink.com (199.45.150.20) 259.334 ms 217.972 ms 189.134 ms > 15 deathstar.tgi.com (199.45.150.242) 289.706 ms 288.623 ms 329.153 ms > > > Doug White | University of Oregon > Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant > http://gladstone.uoregon.edu/~dwhite | Computer Science Major > > > > -------------------------------------------------- Dave Eldenburg Thistle Grove Industries, Inc. dave@tgi.com -------------------------------------------------- From owner-freebsd-questions Thu Jan 1 16:31:32 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id QAA22653 for questions-outgoing; Thu, 1 Jan 1998 16:31:32 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from arl-img-10.compuserve.com (arl-img-10.compuserve.com [149.174.217.140]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id QAA22643 for ; Thu, 1 Jan 1998 16:31:26 -0800 (PST) (envelope-from 100730.3706@compuserve.com) Received: (from mailgate@localhost) by arl-img-10.compuserve.com (8.8.6/8.8.6/2.9) id TAA16903 for questions@freebsd.org; Thu, 1 Jan 1998 19:30:54 -0500 (EST) Date: Thu, 1 Jan 1998 19:27:23 -0500 From: Strobel <100730.3706@compuserve.com> Subject: X-Server under FreeBSD2.2.5 To: FreeBSD Message-ID: <199801011930_MC2-2DBD-6979@compuserve.com> MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Hi, i want to run the FreeBSD 2.2.5 System, but there is a problem with the Accelerated X-Server V2.1 i am using. The raw installation works fine, but when i start the X-Server in test mode with: /usr/X11R6/bin/Xaccel i got the following error message: PCI (#1/1, 8000 000c) Matrox,16: 2064,TVP3026 (8192k, @e2000000, [0,000 - 220,000Mhz]) failed to set default font path 'here comes the default font path ....' Fatal server error: could not open default font 'fixed' On my old FreeBSD 2.1.5 everthing work fine. Can somebody help me with this problem? By the way, the same error occurs under FreeBSD 3.0 Snapshot. Thanks Andreas From owner-freebsd-questions Thu Jan 1 16:36:11 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id QAA23069 for questions-outgoing; Thu, 1 Jan 1998 16:36:11 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from odyssey.apana.org.au (odyssey.apana.org.au [203.11.114.1]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id QAA23005 for ; Thu, 1 Jan 1998 16:36:01 -0800 (PST) (envelope-from terminus@odyssey.apana.org.au) Received: from jmm ([203.25.143.11]) by odyssey.apana.org.au (8.8.7/8.8.7) with SMTP id IAA26108 for ; Fri, 2 Jan 1998 08:34:35 +0800 (WST) Message-Id: <199801020034.IAA26108@odyssey.apana.org.au> From: "Jeremy Malcolm" To: Subject: RE: Boot mgr. Date: Fri, 2 Jan 1998 08:32:49 +0800 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V4.72.2106.4 In-Reply-To: Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk -----BEGIN PGP SIGNED MESSAGE----- I am going to be doing exactly the same thing, except with Linux. The easiest way to do it is with NT's boot manager. Full details are at http://www.windows-nt.com/multiboot/directboot.html. Also see http://www.devious.com/freebsd. - -- |--------- JEREMY MALCOLM ---------| SIG of the day: [ ] Contact [ ] Web [ ] PGP [x] Taglines #1 [ ] #2 Reality is for those who can't face science fiction. | Power corrupts; absolute power is kind of neat. | "It's in Tibetan!" - The Doctor (5G) "A lawyer is like a river." - Kosh | Life is like a simile | Dynsdale! > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Doug White > Sent: Friday, 2 January 1998 6:40 > To: james > Cc: freebsd-questions@FreeBSD.ORG > Subject: Re: Boot mgr. > > > On Thu, 1 Jan 1998, james wrote: > > > What do I need to do to be able to dual boot off two dedicated disks. I > > want to have one disk BSD, and the other NT. Any help would be greatly > > appreciated. > > Booteasy, the default one, should work fine. I don't know if it can grok > NTFS though. > > Doug White | University of Oregon > Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant > http://gladstone.uoregon.edu/~dwhite | Computer Science Major > -----BEGIN PGP SIGNATURE----- Version: PGP for Business Security 5.5 iQB1AwUBNKvEp7/mBljD2JABAQFvagL/e4zkauV8yRmJzHFguxU7al5Jd57zYrcP hLzgySVWCSg/ASGN2SZjCutcnHGkbgCWy7jI+QNOzOFVQxrSq+k24u1CcUTzGuLt ydzWUpv9MWVxs8SyTqNP6rpJvOGziT/j =BnQ8 -----END PGP SIGNATURE----- From owner-freebsd-questions Thu Jan 1 17:12:08 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id RAA25328 for questions-outgoing; Thu, 1 Jan 1998 17:12:08 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from elvis.mu.org (elvis.mu.org [206.156.231.253]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id RAA25319 for ; Thu, 1 Jan 1998 17:12:03 -0800 (PST) (envelope-from paul@elvis.mu.org) Received: (from paul@localhost) by elvis.mu.org (8.8.7/8.8.7) id TAA15924; Thu, 1 Jan 1998 19:11:47 -0600 (CST) (envelope-from paul) Message-ID: <19980101191146.12986@mu.org> Date: Thu, 1 Jan 1998 19:11:46 -0600 From: Paul Saab To: Strobel <100730.3706@compuserve.com> Cc: FreeBSD Subject: Re: X-Server under FreeBSD2.2.5 References: <199801011930_MC2-2DBD-6979@compuserve.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.88 In-Reply-To: <199801011930_MC2-2DBD-6979@compuserve.com>; from Strobel on Thu, Jan 01, 1998 at 07:27:23PM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Has to do with the fact that the fonts are gzipped and Xig's server expects them in "compress" (.Z) format. run this script to fix the problem. #!/bin/bash # # NOTE: This is a completely unsupported shell script. # # HOW TO USE THIS SCRIPT: # # Either: # 1. Save this file, mark it executable, then run it; # 2. Save this file, then do "bash " to execute it. # # Please report any problems/odd behaviors with this script # to support@xig.com . # --Thank you for choosing Accelerated-X!-- # Cordially, Xi Graphics # # Read the Xaccel.ini file, parse it's fontpaths, and convert any # gzipped (.gz) fonts into compressed (.Z) fonts. # # Written for bash, though ksh should work too. sh might work depending on # your OS... # # JET 7/17/97 ######################################################################## # set -x # uncomment for debugging XACCELINI=/etc/Xaccel.ini GUNZIP="$(type -path gunzip)" COMPRESS="$(type -path compress)" # first get the list of fontpaths from XACCELINI FONTPATHS="" if [ ! -r $XACCELINI ] then echo "Cannot read $XACCELINI" exit 1 fi if [ ! -x "$COMPRESS" -o ! -x "$GUNZIP" ] then echo "Can not locate either compress or gunzip." exit 1 fi infontp=0 done=0 while read theline do if [ $done -eq 1 ] then # no need to proceed, we're done (skip remaining lines) continue fi if echo "$theline" |fgrep '[FONTPATH]' >/dev/null 2>&1 then infontp=1 continue fi if [ $infontp -eq 1 ] then # we're reading fontpaths # see if we're at the end (a blank line) if [ -z "$theline" ] then done=1 fi tfp="$(echo $theline |tr -d '\",;')" FONTPATHS="$FONTPATHS $tfp" fi done <$XACCELINI # now we've got the font paths, lets go thru them and convert any gz's # into Z's echo "FONTPATHS=$FONTPATHS" if [ -z "$FONTPATHS" ] then echo "No fontpaths found...How strange..." exit 1 fi for i in $FONTPATHS do # we'll be extra cautious. It may be slow, but it should'nt # muck up your system for j in $i/*.gz do if [ ! -r "$j" ] then # can't read it? can't convert it continue fi cp $j /tmp base="$(basename $j .gz)" $GUNZIP -c /tmp/$base.gz |$COMPRESS -c >$(dirname $j)/$base.Z if [ $? -ne 0 ] then # something bad happened, rm .Z, report and continue echo "Problem converting $j - skipping" rm -f $(dirname $j)/$base.Z else # something good happened, rm old .gz file # COMMENT the next 2 lines if you want to keep # the gzipped version around... echo "$j converted, removing gzipped version." rm -f $j # cleanup chmod 644 $(dirname $j)/$base.Z rm -f /tmp/$base.gz fi done echo "Done with $i." done echo "Have a glorious day." exit 0 Strobel (100730.3706@compuserve.com) wrote: > Hi, > i want to run the FreeBSD 2.2.5 System, but there is a problem with the > Accelerated X-Server V2.1 i am using. The raw installation works fine, but > when i start the X-Server in test mode with: > /usr/X11R6/bin/Xaccel > i got the following error message: > > PCI (#1/1, 8000 000c) > Matrox,16: 2064,TVP3026 (8192k, @e2000000, [0,000 - 220,000Mhz]) > failed to set default font path 'here comes the default font path ....' > Fatal server error: > could not open default font 'fixed' > > On my old FreeBSD 2.1.5 everthing work fine. Can somebody help me with this > problem? > By the way, the same error occurs under FreeBSD 3.0 Snapshot. > > Thanks > > Andreas From owner-freebsd-questions Thu Jan 1 18:41:05 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id SAA29491 for questions-outgoing; Thu, 1 Jan 1998 18:41:05 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from argon.linkzone.com (argon.linkzone.com [204.182.59.32]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id SAA29486 for ; Thu, 1 Jan 1998 18:41:01 -0800 (PST) (envelope-from mlt@linkzone.com) Received: from localhost (mlt@localhost) by argon.linkzone.com (8.8.7/8.8.5) with SMTP id SAA03087; Thu, 1 Jan 1998 18:39:32 -0800 (PST) Date: Thu, 1 Jan 1998 18:39:32 -0800 (PST) From: Mark Turrin To: Doug White cc: freebsd-questions@FreeBSD.ORG Subject: Re: Tape Backups In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Hello Doug, I want to thank you for the suggestion and report back on my successes. Apparently it did want the f option as it would not work when I removed it. Here is the script command that worked: /sbin/rdump 0cfua slugo:/dev/rmt0.1 /dev/sd0a # / Now is it correct that I could replace ``/dev/sd0a'' with the ``/'' (the real mount point of the partition) and it will still work? Thanks again and Happy New Year! ___________________________________________________________________ Mark L. Turrin Drag me, drop me, treat me like an object! mlt@linkzone.com On Thu, 1 Jan 1998, Doug White wrote: > > I use to backup my BSD 2.2.2 box to a Apple Network server called slugo > > running AIX 4.1.4.0 using the following command: > > > > rdump -0cfus slugo:/dev/rmt0.1 2200000 /dev/sd0a # / > > rdump -0cfus slugo:/dev/rmt0.1 2200000 /dev/sd0s1e # /home > > rdump -0cfus slugo:/dev/rmt0.1 2200000 /dev/sd0s1g # /usr > > rdump -0cfus slugo:/dev/rmt0.1 2200000 /dev/sd0s1h # /var > > Oops, no dash. Oh OK. Gee that's what I love about Unix. All commands use dashes except one. gotta love it. :-P In addiiton, the f and s options are out of date. You > should use the a and b options for optimum tape usage. See the dump man > page for details. From owner-freebsd-questions Thu Jan 1 19:27:30 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id TAA01789 for questions-outgoing; Thu, 1 Jan 1998 19:27:30 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from mph124b.rh.psu.edu (MPH124B.rh.psu.edu [128.118.126.36]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id TAA01784 for ; Thu, 1 Jan 1998 19:27:28 -0800 (PST) (envelope-from gsutter@pobox.com) From: gsutter@pobox.com Received: from localhost (gsutter@localhost) by mph124b.rh.psu.edu (8.8.7/8.8.7) with SMTP id WAA10568; Thu, 1 Jan 1998 22:27:13 -0500 (EST) (envelope-from gsutter@pobox.com) Date: Thu, 1 Jan 1998 22:27:12 -0500 (EST) X-Sender: gsutter@mph124b.rh.psu.edu To: Doug White cc: "Joe \"Marcus\" Clarke" , FreeBSD User Questions List Subject: Re: tclsh In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk On Thu, 1 Jan 1998, Doug White wrote: >On Thu, 1 Jan 1998, Joe "Marcus" Clarke wrote: > >> I just installed 2.2.5-RELEASE from scratch, and things went flawlessly. >> I did it via ftp using a modem...not bad guys! Anyway, after a lot of >> configuring and tweaking, I finally needed to run the addgroup command. >> Much to my surprise, it didn't work. Turns out, /usr/bin/tclsh didn't >> exist. I KNOW I didn't delete it. NEVER touch anything in /usr/bin. > >That's confirmed; the 2.2.5 bin distribution doesn't have tclsh, but the >2.2.2 one does. I'll submit a bug report. I submitted this as misc/4938 on 11/04/97; it is still open. GReg -- Gregory S. Sutter "How do I read this file?" mailto:gsutter@pobox.com "You uudecode it." http://www.pobox.com/~gsutter/ "I I I decode it?" From owner-freebsd-questions Thu Jan 1 19:56:48 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id TAA03286 for questions-outgoing; Thu, 1 Jan 1998 19:56:48 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from bnoc.net (blitz.bnoc.net [204.157.39.2]) by hub.freebsd.org (8.8.7/8.8.7) with SMTP id TAA03276 for ; Thu, 1 Jan 1998 19:56:44 -0800 (PST) (envelope-from jamesh@bnoc.net) Received: from [204.157.39.87] by bnoc.net (SMTPD32-4.0) id A52B2730186; Thu, 01 Jan 1998 22:55:23 -0500 Message-ID: <34AC6579.2DF5C14@bnoc.net> Date: Thu, 01 Jan 1998 22:56:41 -0500 From: James Higgins X-Mailer: Mozilla 4.04 [en] (Win95; I) MIME-Version: 1.0 To: Doug White CC: freebsd-questions@freebsd.org Subject: Re: Panasonic CR-563 CD-ROM Drives. References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Doug White wrote: > > On Thu, 1 Jan 1998, James Higgins wrote: > > > Ok, > > > > I change the I/O address to 0x630. Windows 95 shows the device at 0x630 > > and linux also detects the drive at 0x630. Kernel parameter in linux is > > "sbpcd=0x630,LaserMate" if that means anything to anyone. Then I save > > the userconfig parameters and continue booting. > > Did you set the interrupt? > There is no way to specify an interrupt as far as I can tell. > > The drive light flashes like the drive is read, but when I select it as > > my installation media I get the now infamous "No CDROM devices found.... > > blah blah blah" error. I can switch to virtual console 2 and see the > > line: "DEBUG: Try at matcdc0 retruns errno 2". > > Hit scroll lock at the main install menu, then use the arrow keys to > scroll back and see the boot prompt. See if matcd0 found anything. I went ahead and installed off an MSDOS partition since I had he space and I thought maybe I could make some sense out of it if I saw the kernel configuration. It does not detect a drive while installing or if I compile a kernel with the following line in the configuration. controller matcd0 at isa ? port 0x630 bio I also read in the mailing list archive that someone else had a problem if the ID jumper on the drive was not one. I also changed that from 3 to one. The drive still works in DOS/Windows and nothing in FreeBSD. I also tried setting the port to -1 and having the driver probe. No luck. In the file /usr/src/sys/i386/isa/matcd/options.h it is stated that you there are additional I/O ports that can be autoprobed but are not by default since the are usually the addresses of network or SCSI cards. Considering I have netither I enabled the additional I/O ports, recompiled and still no drive detected. The strangest part off all this mess is that the drive activity light comes on like it is being read during the boot sequence. Hmmmmm ponderous. Any further suggestions? James Higgins From owner-freebsd-questions Thu Jan 1 20:01:14 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id UAA03705 for questions-outgoing; Thu, 1 Jan 1998 20:01:14 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from awfulhak.demon.co.uk (awfulhak.demon.co.uk [158.152.17.1]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id UAA03698 for ; Thu, 1 Jan 1998 20:01:08 -0800 (PST) (envelope-from brian@awfulhak.org) Received: from gate.lan.awfulhak.org (localhost [127.0.0.1]) by awfulhak.demon.co.uk (8.8.7/8.8.7) with ESMTP id XAA01930; Thu, 1 Jan 1998 23:57:38 GMT (envelope-from brian@gate.lan.awfulhak.org) Message-Id: <199801012357.XAA01930@awfulhak.demon.co.uk> X-Mailer: exmh version 2.0.1 12/23/97 To: Jay Nelson cc: Steve Hovey , questions@freebsd.org Subject: Re: ssh trust (was Re: HACKED (again)) In-reply-to: Your message of "Thu, 01 Jan 1998 12:29:52 CST." Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Thu, 01 Jan 1998 23:57:37 +0000 From: Brian Somers Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk > On Thu, 1 Jan 1998, Steve Hovey wrote: > > > > > I personally dont trust ssh - I have no other reason not to trust it than > > that I suffered a root incursion once shortly after installing it - since > > it was the last thing in, I did not reinstall it when I rebuilt the > > system. > > When we installed ssh, we tested and checked against a dump. Normal > telnet login sends the password 1 character per packet -- fairly easy > to pick out of a dump. Ssh, though, collects the entire password, > encrypts it and sends one packet. If we weren't using a target machine > with no other activity, we would likely have missed it. Errrum, that's not true AFAIK. Ssh's authentication is challenge based - it goes something like this: The server sends some random data, the client encrypts it using his private key, his machines private key and the servers public key and sends the answer to the server. The server decrypts it using its private key, the client machines public key and the clients public key, then compares it against the original. Someone watching the conversation will be none the wiser. I'm sure it's more complicated than this too :-) > -- Jay > -- Brian , , Don't _EVER_ lose your sense of humour.... From owner-freebsd-questions Thu Jan 1 20:26:22 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id UAA05585 for questions-outgoing; Thu, 1 Jan 1998 20:26:22 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from super.zippo.com (perry.zippo.com [207.211.168.33]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id UAA05554 for ; Thu, 1 Jan 1998 20:26:16 -0800 (PST) (envelope-from reyesf@super.zippo.com) Received: (from reyesf@localhost) by super.zippo.com (8.8.6/8.8.7) id UAA21255; Thu, 1 Jan 1998 20:26:14 -0800 (PST) Message-Id: <199801020426.UAA21255@super.zippo.com> From: "Francisco Reyes" To: "FreeBSD questions" Date: Thu, 01 Jan 98 23:24:06 -0400 Reply-To: "Francisco Reyes" Priority: Normal X-Mailer: PMMail 1.95a For OS/2 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Subject: What settings for viewing spanish characters? Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk What settings do I need to change to be able to see Spanish characters (ie spanish n and letters with accents). I tried changing the "system console" to ISO88591 and I could see the characters in the command line by holding down my ALT key and pressin their ASCII values, but then /stand/sysinstall's borders got changed to funny characters. I also couldn't figure out how to set Netscape to see those characters. From owner-freebsd-questions Thu Jan 1 20:26:45 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id UAA05718 for questions-outgoing; Thu, 1 Jan 1998 20:26:45 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from super.zippo.com (perry.zippo.com [207.211.168.33]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id UAA05674 for ; Thu, 1 Jan 1998 20:26:37 -0800 (PST) (envelope-from reyesf@super.zippo.com) Received: (from reyesf@localhost) by super.zippo.com (8.8.6/8.8.7) id UAA21278; Thu, 1 Jan 1998 20:26:36 -0800 (PST) Message-Id: <199801020426.UAA21278@super.zippo.com> From: "Francisco Reyes" To: "FreeBSD questions" Date: Thu, 01 Jan 98 23:24:06 -0400 Reply-To: "Francisco Reyes" Priority: Normal X-Mailer: PMMail 1.95a For OS/2 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Subject: What settings for viewing spanish characters? Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk What settings do I need to change to be able to see Spanish characters (ie spanish n and letters with accents). I tried changing the "system console" to ISO88591 and I could see the characters in the command line by holding down my ALT key and pressin their ASCII values, but then /stand/sysinstall's borders got changed to funny characters. I also couldn't figure out how to set Netscape to see those characters. From owner-freebsd-questions Thu Jan 1 20:27:15 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id UAA05902 for questions-outgoing; Thu, 1 Jan 1998 20:27:15 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from super.zippo.com (perry.zippo.com [207.211.168.33]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id UAA05866 for ; Thu, 1 Jan 1998 20:27:09 -0800 (PST) (envelope-from reyesf@super.zippo.com) Received: (from reyesf@localhost) by super.zippo.com (8.8.6/8.8.7) id UAA21324; Thu, 1 Jan 1998 20:27:07 -0800 (PST) Message-Id: <199801020427.UAA21324@super.zippo.com> From: "Francisco Reyes" To: "FreeBSD questions" Date: Thu, 01 Jan 98 23:24:06 -0400 Reply-To: "Francisco Reyes" Priority: Normal X-Mailer: PMMail 1.95a For OS/2 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Subject: What settings for viewing spanish characters? Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk What settings do I need to change to be able to see Spanish characters (ie spanish n and letters with accents). I tried changing the "system console" to ISO88591 and I could see the characters in the command line by holding down my ALT key and pressin their ASCII values, but then /stand/sysinstall's borders got changed to funny characters. I also couldn't figure out how to set Netscape to see those characters. From owner-freebsd-questions Thu Jan 1 20:28:05 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id UAA06052 for questions-outgoing; Thu, 1 Jan 1998 20:28:05 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from super.zippo.com (perry.zippo.com [207.211.168.33]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id UAA06047 for ; Thu, 1 Jan 1998 20:28:04 -0800 (PST) (envelope-from reyesf@super.zippo.com) Received: (from reyesf@localhost) by super.zippo.com (8.8.6/8.8.7) id UAA21385; Thu, 1 Jan 1998 20:28:03 -0800 (PST) Message-Id: <199801020428.UAA21385@super.zippo.com> From: "Francisco Reyes" To: "FreeBSD questions" Date: Thu, 01 Jan 98 23:24:06 -0400 Reply-To: "Francisco Reyes" Priority: Normal X-Mailer: PMMail 1.95a For OS/2 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Subject: What settings for viewing spanish characters? Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk What settings do I need to change to be able to see Spanish characters (ie spanish n and letters with accents). I tried changing the "system console" to ISO88591 and I could see the characters in the command line by holding down my ALT key and pressin their ASCII values, but then /stand/sysinstall's borders got changed to funny characters. I also couldn't figure out how to set Netscape to see those characters. From owner-freebsd-questions Thu Jan 1 20:41:42 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id UAA06765 for questions-outgoing; Thu, 1 Jan 1998 20:41:42 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from mhv.net (root@spice.mhv.net [199.0.0.21]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id UAA06760 for ; Thu, 1 Jan 1998 20:41:37 -0800 (PST) (envelope-from mgraffam@mhv.net) From: mgraffam@mhv.net Received: from localhost (qripto@port87.mhv.net [206.229.41.15]) by mhv.net (8.8.5/8.7.3) with SMTP id XAA05928; Thu, 1 Jan 1998 23:41:27 -0500 Date: Thu, 1 Jan 1998 23:35:54 -0500 (EST) X-Sender: qripto@localhost To: Brian Somers cc: questions@FreeBSD.ORG Subject: Re: ssh trust (was Re: HACKED (again)) In-Reply-To: <199801012357.XAA01930@awfulhak.demon.co.uk> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk -----BEGIN PGP SIGNED MESSAGE----- On Thu, 1 Jan 1998, Brian Somers wrote: > Errrum, that's not true AFAIK. Ssh's authentication is challenge > based - it goes something like this: > > The server sends some random data, the client encrypts it using his > private key, his machines private key and the servers public key and > sends the answer to the server. The server decrypts it using its > private key, the client machines public key and the clients public > key, then compares it against the original. Someone watching the > conversation will be none the wiser. I dont think that ssh uses this variation on RSA authentication, but it well may .. however it is also true that ssh uses symmetric crypto of the password (if you use a Unix password to login). In this scenario, public key crypto is used to send a session key for IDEA or 3DES, or whatever you're using, and then the clients asks the user for his Unix password, it is encrypted (along with all other traffic) with the IDEA|3DES session key and sent to the host, decrypted and verified as usual. Ssh supports other authentication schemes as well, including kerberos (if it is compiled in) and TIS, though I know nothing of this later scheme. Michael J. Graffam (mgraffam@mhv.net) http://www.mhv.net/~mgraffam -- Philosophy, Religion, Computers, Crypto, etc "Enlightenment is man's emergence from his self-incurred immaturity. Immaturity is the inability to use one's own understanding without the guidance of another. . .Sapere aude! Have the courage to use your own understanding!" - Immanuel Kant "What is Enlightenment?" -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 5.0i for non-commercial use Charset: noconv iQCVAwUBNKxurwKEiLNUxnAfAQHwqwP+PpsnJLTZOu4blI5X5AdWZgb6FCp+VrWq ma7LZxz5r7AWSXNAouDFCR7f42IK/iHLORavHS1wixUwk6VpF3q/1UOCmywxsKtQ g8sDm4ZG22CMaWZ7YB3RBzRcVCKtCx/Uxf0XoOA03Lu1DTIbyAIPlroOVisvJMNQ KKZmvDQSr0Y= =Qgbz -----END PGP SIGNATURE----- From owner-freebsd-questions Thu Jan 1 21:39:00 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id VAA09400 for questions-outgoing; Thu, 1 Jan 1998 21:39:00 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from tok.qiv.com (miwcbtXGa+mfzCslWGxDJeRGmPoFmlEV@[204.214.141.211]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id VAA09390 for ; Thu, 1 Jan 1998 21:38:54 -0800 (PST) (envelope-from jdn@acp.qiv.com) Received: (from uucp@localhost) by tok.qiv.com (8.8.8/8.8.5) with UUCP id XAA08716; Thu, 1 Jan 1998 23:38:44 -0600 (CST) Received: from localhost (jdn@localhost) by acp.qiv.com (8.8.8/8.8.5) with SMTP id XAA05019; Thu, 1 Jan 1998 23:35:16 -0600 (CST) Date: Thu, 1 Jan 1998 23:35:15 -0600 (CST) From: Jay Nelson To: Brian Somers cc: Steve Hovey , questions@freebsd.org Subject: Re: ssh trust (was Re: HACKED (again)) In-Reply-To: <199801012357.XAA01930@awfulhak.demon.co.uk> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk You could be right. Two of us checked the dumps and we were none the wiser. One of us tailed the dump while the other logged in. All we saw was the one packet leaving after the password was entered. After that, all was encrypted garbage. Our conclusion was that it was far better to use ssh than not. I think I may look at ssh more closely. Thanks -- Jay On Thu, 1 Jan 1998, Brian Somers wrote: > > On Thu, 1 Jan 1998, Steve Hovey wrote: > > > > > > > > I personally dont trust ssh - I have no other reason not to trust it than > > > that I suffered a root incursion once shortly after installing it - since > > > it was the last thing in, I did not reinstall it when I rebuilt the > > > system. > > > > When we installed ssh, we tested and checked against a dump. Normal > > telnet login sends the password 1 character per packet -- fairly easy > > to pick out of a dump. Ssh, though, collects the entire password, > > encrypts it and sends one packet. If we weren't using a target machine > > with no other activity, we would likely have missed it. > > Errrum, that's not true AFAIK. Ssh's authentication is challenge > based - it goes something like this: > > The server sends some random data, the client encrypts it using his > private key, his machines private key and the servers public key and > sends the answer to the server. The server decrypts it using its > private key, the client machines public key and the clients public > key, then compares it against the original. Someone watching the > conversation will be none the wiser. > > I'm sure it's more complicated than this too :-) > > > -- Jay > > > > -- > Brian , , > > Don't _EVER_ lose your sense of humour.... From owner-freebsd-questions Thu Jan 1 21:42:06 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id VAA09607 for questions-outgoing; Thu, 1 Jan 1998 21:42:06 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from ocala.cs.miami.edu (ocala.cs.miami.edu [129.171.34.17]) by hub.freebsd.org (8.8.7/8.8.7) with SMTP id VAA09602 for ; Thu, 1 Jan 1998 21:42:02 -0800 (PST) (envelope-from jmcla@ocala.cs.miami.edu) Received: from ocala.cs.miami.edu by ocala.cs.miami.edu via SMTP (950413.SGI.8.6.12/940406.SGI) id AAA23651; Fri, 2 Jan 1998 00:41:53 -0500 Date: Fri, 2 Jan 1998 00:41:53 -0500 (EST) From: "Joe \"Marcus\" Clarke" To: gsutter@pobox.com cc: Doug White , FreeBSD User Questions List Subject: Re: tclsh In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Thanks for all your help regarding "built-in" tcl. I grabbed the exec and libs from an upgraded 2.2.5 machine (upgraded from 2.2.2). I just wanted to avoid making changes to the system below /usr/local. I feel most problems can be avoided by staying out of system default binaries and libraries. The tcl8.0.2 port works quite well for addgroup in case anybody wonders. Thanks again for all the advice. Joe Clarke On Thu, 1 Jan 1998 gsutter@pobox.com wrote: > On Thu, 1 Jan 1998, Doug White wrote: > > >On Thu, 1 Jan 1998, Joe "Marcus" Clarke wrote: > > > >> I just installed 2.2.5-RELEASE from scratch, and things went flawlessly. > >> I did it via ftp using a modem...not bad guys! Anyway, after a lot of > >> configuring and tweaking, I finally needed to run the addgroup command. > >> Much to my surprise, it didn't work. Turns out, /usr/bin/tclsh didn't > >> exist. I KNOW I didn't delete it. NEVER touch anything in /usr/bin. > > > >That's confirmed; the 2.2.5 bin distribution doesn't have tclsh, but the > >2.2.2 one does. I'll submit a bug report. > > I submitted this as misc/4938 on 11/04/97; it is still open. > > GReg > -- > Gregory S. Sutter "How do I read this file?" > mailto:gsutter@pobox.com "You uudecode it." > http://www.pobox.com/~gsutter/ "I I I decode it?" > From owner-freebsd-questions Thu Jan 1 22:21:44 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id WAA11684 for questions-outgoing; Thu, 1 Jan 1998 22:21:44 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from super.zippo.com (perry.zippo.com [207.211.168.33]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id WAA11679 for ; Thu, 1 Jan 1998 22:21:41 -0800 (PST) (envelope-from reyesf@super.zippo.com) Received: (from reyesf@localhost) by super.zippo.com (8.8.6/8.8.7) id WAA28109; Thu, 1 Jan 1998 22:21:40 -0800 (PST) Message-Id: <199801020621.WAA28109@super.zippo.com> From: "Francisco Reyes" To: "FreeBSD questions" Date: Thu, 01 Jan 98 23:24:06 -0400 Reply-To: "Francisco Reyes" Priority: Normal X-Mailer: PMMail 1.95a For OS/2 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Subject: What settings for viewing spanish characters? Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk What settings do I need to change to be able to see Spanish characters (ie spanish n and letters with accents). I tried changing the "system console" to ISO88591 and I could see the characters in the command line by holding down my ALT key and pressin their ASCII values, but then /stand/sysinstall's borders got changed to funny characters. I also couldn't figure out how to set Netscape to see those characters. From owner-freebsd-questions Thu Jan 1 22:21:50 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id WAA11705 for questions-outgoing; Thu, 1 Jan 1998 22:21:50 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from super.zippo.com (perry.zippo.com [207.211.168.33]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id WAA11698 for ; Thu, 1 Jan 1998 22:21:47 -0800 (PST) (envelope-from reyesf@super.zippo.com) Received: (from reyesf@localhost) by super.zippo.com (8.8.6/8.8.7) id WAA28116; Thu, 1 Jan 1998 22:21:46 -0800 (PST) Message-Id: <199801020621.WAA28116@super.zippo.com> From: "Francisco Reyes" To: "FreeBSD questions" Date: Thu, 01 Jan 98 23:24:06 -0400 Reply-To: "Francisco Reyes" Priority: Normal X-Mailer: PMMail 1.95a For OS/2 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Subject: What settings for viewing spanish characters? Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk What settings do I need to change to be able to see Spanish characters (ie spanish n and letters with accents). I tried changing the "system console" to ISO88591 and I could see the characters in the command line by holding down my ALT key and pressin their ASCII values, but then /stand/sysinstall's borders got changed to funny characters. I also couldn't figure out how to set Netscape to see those characters. From owner-freebsd-questions Thu Jan 1 22:22:58 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id WAA11842 for questions-outgoing; Thu, 1 Jan 1998 22:22:58 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from federation.addy.com (federation.addy.com [207.239.68.2]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id WAA11837 for ; Thu, 1 Jan 1998 22:22:54 -0800 (PST) (envelope-from francisco@natserv.com) Received: from localhost (slip-32-100-111-77.ny.us.ibm.net [32.100.111.77]) by federation.addy.com (8.8.5/8.6.12) with SMTP id BAA18322 for ; Fri, 2 Jan 1998 01:22:22 -0500 (EST) Message-Id: <199801020622.BAA18322@federation.addy.com> From: "Francisco Reyes" To: "FreeBSD questions" Date: Thu, 01 Jan 98 23:24:06 -0400 Reply-To: "Francisco Reyes" Priority: Normal X-Mailer: PMMail 1.95a For OS/2 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Subject: What settings for viewing spanish characters? Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk What settings do I need to change to be able to see Spanish characters (ie spanish n and letters with accents). I tried changing the "system console" to ISO88591 and I could see the characters in the command line by holding down my ALT key and pressin their ASCII values, but then /stand/sysinstall's borders got changed to funny characters. I also couldn't figure out how to set Netscape to see those characters. From owner-freebsd-questions Thu Jan 1 22:26:05 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id WAA12101 for questions-outgoing; Thu, 1 Jan 1998 22:26:05 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from proxyb1.san.rr.com (proxyb1-atm.san.rr.com [204.210.0.10]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id WAA12088 for ; Thu, 1 Jan 1998 22:26:02 -0800 (PST) (envelope-from Studded@dal.net) Received: from dal.net (dt051n19.san.rr.com [204.210.32.25]) by proxyb1.san.rr.com (8.8.7/8.8.8) with ESMTP id WAA29003; Thu, 1 Jan 1998 22:24:54 -0800 (PST) Message-ID: <34AC8835.92E4C0A1@dal.net> Date: Thu, 01 Jan 1998 22:24:53 -0800 From: Studded Organization: DALnet IRC Network X-Mailer: Mozilla 4.04 [en] (X11; I; FreeBSD 2.2.5-STABLE i386) MIME-Version: 1.0 To: James Higgins CC: Doug White , freebsd-questions@freebsd.org Subject: Re: Panasonic CR-563 CD-ROM Drives. References: <34AC6579.2DF5C14@bnoc.net> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk James Higgins wrote: > It does not detect a drive while installing or if I compile a kernel > with the following line in the configuration. > > controller matcd0 at isa ? port 0x630 bio Ok, silly question, but have you ever tried this without changing the settings? I had one of these drives and never had to do anything to it to get it to work. Try the setting in LINT and see what that does for you. Doug From owner-freebsd-questions Thu Jan 1 23:04:26 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id XAA14181 for questions-outgoing; Thu, 1 Jan 1998 23:04:26 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from tpts5.seed.net.tw (root@tpts5.seed.net.tw [139.175.12.10]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id XAA14176 for ; Thu, 1 Jan 1998 23:04:21 -0800 (PST) (envelope-from guelph@tpts5.seed.net.tw) Received: from ppt12797 (t192-74.dialup.seed.net.tw [139.175.192.74]) by tpts5.seed.net.tw (8.8.7/8.8.6) with SMTP id PAA21423 for ; Fri, 2 Jan 1998 15:03:59 +0800 (CST) Message-ID: <34AC8F45.5B47@tpts5.seed.net.tw> Date: Fri, 02 Jan 1998 14:55:01 +0800 From: Gordon Wang Reply-To: guelph@tpts5.seed.net.tw X-Mailer: Mozilla 3.01 (Win95; I) MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: netscape install? Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Dear Sir I am a FreeBSD 2.2.1 user. I just unpacked the netscape file: "navigator-v404-export.x86-unknown-freebsd.tar.gz" in the directory /usr/local/netscape . But when I typed the executable files "ns-install" or "netscape" to install netscape, I got "command not found". What should I do to install netscape. Please help me Thank you very much Gordon From owner-freebsd-questions Thu Jan 1 23:29:17 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id XAA15381 for questions-outgoing; Thu, 1 Jan 1998 23:29:17 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from odyssey.apana.org.au (odyssey.apana.org.au [203.11.114.1]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id XAA15372 for ; Thu, 1 Jan 1998 23:29:10 -0800 (PST) (envelope-from terminus@odyssey.apana.org.au) Received: from localhost (terminus@localhost) by odyssey.apana.org.au (8.8.7/8.8.7) with SMTP id PAA16741; Fri, 2 Jan 1998 15:23:51 +0800 (WST) Date: Fri, 2 Jan 1998 15:23:51 +0800 (WST) From: Jeremy Malcolm To: Gordon Wang cc: freebsd-questions@FreeBSD.ORG Subject: Re: netscape install? In-Reply-To: <34AC8F45.5B47@tpts5.seed.net.tw> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Try prefixing "./" before the filename. -- |--------- JEREMY MALCOLM ---------| SIG of the day: [ ] Contact [ ] Web [ ] PGP [ ] Taglines #1 [x] #2 "I'm a lawyer." "Honest?" "No, the usual kind." | Linux, the choice of a GNU generation. | Are you the brain specialist? | "Could anyone pass the sodium chloride, please?" - Adric (5W) | The Nanites have lawyers? From owner-freebsd-questions Thu Jan 1 23:44:53 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id XAA16082 for questions-outgoing; Thu, 1 Jan 1998 23:44:53 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from bnoc.net (blitz.bnoc.net [204.157.39.2]) by hub.freebsd.org (8.8.7/8.8.7) with SMTP id XAA16077 for ; Thu, 1 Jan 1998 23:44:48 -0800 (PST) (envelope-from jamesh@bnoc.net) Received: from [204.157.39.61] by bnoc.net (SMTPD32-4.0) id AA9F19302A6; Fri, 02 Jan 1998 02:43:27 -0500 Date: Thu, 1 Jan 1998 21:44:19 -0500 (EST) From: James To: Studded cc: Doug White , freebsd-questions@freebsd.org Subject: Re: Panasonic CR-563 CD-ROM Drives. In-Reply-To: <34AC8835.92E4C0A1@dal.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk On Thu, 1 Jan 1998, Studded wrote: > James Higgins wrote: > > > It does not detect a drive while installing or if I compile a kernel > > with the following line in the configuration. > > > > controller matcd0 at isa ? port 0x630 bio > > Ok, silly question, but have you ever tried this without changing the > settings? I had one of these drives and never had to do anything to it > to get it to work. Try the setting in LINT and see what that does for > you. Yep. The GENERIC kernel did nothing on the default 0x230 setting and gave the same behavior I am experiencing now when I used 0x630, activity but not actually "detecting" it. I kinda wish it was that simple.. :) James From owner-freebsd-questions Fri Jan 2 00:52:26 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id AAA18655 for questions-outgoing; Fri, 2 Jan 1998 00:52:26 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from send1b.yahoomail.com (send1b.yahoomail.com [205.180.60.23]) by hub.freebsd.org (8.8.7/8.8.7) with SMTP id AAA18649 for ; Fri, 2 Jan 1998 00:52:21 -0800 (PST) (envelope-from rgireyev@yahoo.com) Message-ID: <19980102085207.6076.rocketmail@send1b.yahoomail.com> Received: from [206.175.225.4] by send1b; Fri, 02 Jan 1998 00:52:07 PST Date: Fri, 2 Jan 1998 00:52:07 -0800 (PST) From: Rudy Gireyev Subject: Re: Can't Access Apache Manual Files To: grobin@accessv.com Cc: questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk ---Geoffrey Robinson wrote: > > I added the path /usr/apache/man to MANPATH in my .login file but man Make sure it made it into the path when you are running it. > still doesn't have any apache data. I also tried man while my current > directory was /usr/apache/man but it didn't work either. I'm afraid I If the preiod (.) is not in the man path it will not look in the current directory. > know very little about how the man system works. > > -Geoff > > Rudy Gireyev wrote: > > > > 1. You can either cd to the directory and do man from there. > > 2. Include the apache man directory in your man PATH. > > See man man for exact indtruction > > Rudy > > > > ---Geoffrey Robinson wrote: > > > > > > Greetings, > > > I just installed the apache-current port into the directory > > /usr/apache/ > > > and discovered that all though there are man files in the Apache > > > directory I can't access them through man. Has something gone wrong > > > during the install or do I need to add them to man myself somehow? > > > > > > Thanks. > > > -- > > > Geoffrey Robinson > > > grobin@accessv.com > > > Oakville, Ontario, Canada. > > > > > > > _________________________________________________________ > > DO YOU YAHOO!? > > Get your free @yahoo.com address at http://mail.yahoo.com > _________________________________________________________ DO YOU YAHOO!? Get your free @yahoo.com address at http://mail.yahoo.com From owner-freebsd-questions Fri Jan 2 01:56:11 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id BAA21649 for questions-outgoing; Fri, 2 Jan 1998 01:56:11 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from proxy3.ba.best.com (root@proxy3.ba.best.com [206.184.139.14]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id BAA21644 for ; Fri, 2 Jan 1998 01:56:08 -0800 (PST) (envelope-from bsampley@best.com) Received: from bsampley.my.domain (stk-pm1-49-49.dialup.slip.net [207.171.231.49]) by proxy3.ba.best.com (8.8.8/8.8.BEST) with SMTP id BAA10168; Fri, 2 Jan 1998 01:55:40 -0800 (PST) Date: Fri, 2 Jan 1998 01:54:15 -0800 (PST) From: Burton Sampley X-Sender: bsampley@bsampley.my.domain To: Strobel <100730.3706@compuserve.com> cc: FreeBSD Subject: Re: X-Server under FreeBSD2.2.5 In-Reply-To: <199801011930_MC2-2DBD-6979@compuserve.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk I had this same problem. I couldn't find the reply from XI so I searched the archives (in -current). For XIGv3.1 here's their solution (BTW, I would ignore the recomendation to rm font.alias): Hello Burton (and FreeBSD-current readers), The problem you are seeing is due to XF86 shipping their fonts in gzipped format. The X server does not know how to uncompress them. This is not of course something that we could know, since v3.1 shipped well before the XF86 release. And it is not something seen when running with AcceleratedX's CDE product, since we ship our own X libs and fonts with this. The solution: unix-prompt> cd /path/to/fonts unix-prompt> rm fonts.dir fonts.alias fonts.scale (note: not all files are necessarily present in each dir) unix-prompt> gzip -d * unix-prompt> compress * unix-prompt> mkfontdir Repeat for each font directory you are going to use - these are listed in the /etc/Xaccel.ini file... NOTE: This was dated around Jun 1997. Hope this helps. - burton - --------------- Burton Sampley bsampley@best.com or bsampley@haywire.csuhayward.edu PGP key available at http://www.best.com/~bsampley/pgp.html On Thu, 1 Jan 1998, Strobel wrote: > Date: Thu, 1 Jan 1998 19:27:23 -0500 > From: Strobel <100730.3706@compuserve.com> > To: FreeBSD > Subject: X-Server under FreeBSD2.2.5 > > Hi, > i want to run the FreeBSD 2.2.5 System, but there is a problem with the > Accelerated X-Server V2.1 i am using. The raw installation works fine, but > when i start the X-Server in test mode with: > /usr/X11R6/bin/Xaccel > i got the following error message: > > PCI (#1/1, 8000 000c) > Matrox,16: 2064,TVP3026 (8192k, @e2000000, [0,000 - 220,000Mhz]) > failed to set default font path 'here comes the default font path ....' > Fatal server error: > could not open default font 'fixed' > > On my old FreeBSD 2.1.5 everthing work fine. Can somebody help me with this > problem? > By the way, the same error occurs under FreeBSD 3.0 Snapshot. > > Thanks > > Andreas > From owner-freebsd-questions Fri Jan 2 01:57:13 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id BAA21723 for questions-outgoing; Fri, 2 Jan 1998 01:57:13 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from polaris.we.lc.ehu.es (polaris.we.lc.ehu.es [158.227.6.43]) by hub.freebsd.org (8.8.7/8.8.7) with SMTP id BAA21699; Fri, 2 Jan 1998 01:56:49 -0800 (PST) (envelope-from jose@we.lc.ehu.es) Received: from we.lc.ehu.es by polaris.we.lc.ehu.es (SMI-8.6/SMI-SVR4) id KAA00460; Fri, 2 Jan 1998 10:56:38 +0100 Message-ID: <34ACB9BF.935CB4C3@we.lc.ehu.es> Date: Fri, 02 Jan 1998 10:56:15 +0100 From: "Jose M. Alcaide" Organization: Universidad del Pais Vasco - Dpto. de Electricidad y Electronica X-Mailer: Mozilla 4.04 [en] (X11; I; SunOS 5.5.1 sun4u) MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG, pol@leissner.se, helbig@FreeBSD.ORG Subject: SOLVED: International characters in vi are displayed as hex? References: <348FB609.AE23FC54@we.lc.ehu.es> <34A929D6.120E7590@we.lc.ehu.es> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Jose M. Alcaide wrote: > > If compiled on FreeBSD, the call to setlocale() pass LC_ALL as > the first argument. I have tested this, and setlocale(LC_ALL,"") > works with most locales, but fails with a few ones: > > ascii > es_ES.ISO_8859-1 > fi_FI.ISO_8859-1 > ja_JP.EUC [also fails with setlocale(LC_CTYPE, "")] > ja_JP.SJIS [also fails with setlocale(LC_CTYPE, "")] > ko_KR.EUC [also fails with setlocale(LC_CTYPE, "")] > lt_LN.ASCII > lt_LN.ISO_8859-1 > lt_LN.ISO_8859-2 > nl_BE.ISO_8859-1 > sv_SE.ISO_8859-1 > us-ascii > > However, setlocale(LC_CTYPE, "") [_not_ LC_ALL] works fine with these > locales except the three noted. The vi problem is definitely solved. Indeed, the setlocale(LC_ALL,"") call in /usr/src/contrib/nvi/common/key.c fails because some locales are not fully described: Wolfgang Helbig wrote: > > That's because the file LC_TIME is missing in the directory > /usr/share/locale/es_ES.ISO_8859-1. If called with "LC_ALL", > setlocale(3) returns with an error ("No such file or directory") > without trying to load LC_CTYPE. > > So the fix is to provide a spanish LC_TIME file. You find sources > for other LC_TIME files in /usr/src/share/timedef/data. To build a > LC_TIME file from it's source, you only have to delete the comment > lines. This solution can be also applied to the other locales, such as sv_SE.ISO_8859-1. I have created the LC_TIME file for the spanish locale, and everything works fine now. Thanks Wolfgang! -- JM ----------------------------------------------------------------------- Jose M. Alcaide | mailto:jose@we.lc.ehu.es Universidad del Pais Vasco | http://www.we.lc.ehu.es/~jose Dpto. de Electricidad y Electronica | Facultad de Ciencias - Campus de Lejona | Tel.: +34-4-4647700 x2624 48940 Lejona (Vizcaya) - SPAIN | Fax: +34-4-4858139 ----------------------------------------------------------------------- "Go ahead... make my day." - H. Callahan From owner-freebsd-questions Fri Jan 2 02:17:22 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id CAA22864 for questions-outgoing; Fri, 2 Jan 1998 02:17:22 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from kott.my.domain (root@pm143-27.dialip.mich.net [198.110.144.37]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id CAA22853 for ; Fri, 2 Jan 1998 02:17:16 -0800 (PST) (envelope-from dakott@alpha.delta.edu) Received: from kott.my.domain (dakott@kott.my.domain [192.168.0.1]) by kott.my.domain (8.8.8/8.8.5) with SMTP id FAA01068 for ; Fri, 2 Jan 1998 05:10:28 -0500 (EST) Date: Fri, 2 Jan 1998 05:08:59 -0500 (EST) From: David Kott To: freebsd-questions@freebsd.org Subject: logging ipfirewall LOG directives through syslogd Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I use the kernel IP firewall and use the "log" directive to alert me to possibly nefarious network traffic. However, I would like to channel these messages through the syslog facility. I added some code to the kernel ip firewall to (apparently) log messages via the syslog() interface. This is an example of what I added to: FreeBSD 2.2.5-STABLE #0: Thu Jan 1 20:22:27 EST 1998 src/sys/netinet/ip_fw.c : ipfw_report(yutta, yutta..) ... openlog("ipfw",LOG_NDELAY,LOG_LOCAL7); ... /* Print command name */ + sprintf(buf,"ipfw: %d ", f ? f->fw_number : -1); - printf("ipfw: %d ", f ? f->fw_number : -1); if (!f) + sprintf(buf,"Refuse"); - printf("Refuse"); else switch (f->fw_flg & IP_FW_F_COMMAND) { case IP_FW_F_DENY: + sprintf(buf,"Deny"); - printf("Deny"); break; .... syslog(LOG_INFO,buf); Basically, removing all the kernel printf()'s, and replacing them with a formatted print to a character string "buf". Then, at the end, when all those messages have concatenated appropriately into the line that would normally get dumped on the console (or whathaveyou), I call syslog() and send it to the syslog daemon. However, when I attempt to compile my new kernel, I get a message at the end, during the final link: ... loading kernel ip_fw.o: Undefined symbol `_openlog' referenced from text segment ip_fw.o: Undefined symbol `_syslog' referenced from text segment *** Error code 1 Stop. The only thing I am sure about is that I should leave kernel programming to people who do it best.. namely, not myself! In any case, if you have any insight into what I am trying to do, and can suggest a solution, I would LOVE to hear from you. -d From owner-freebsd-questions Fri Jan 2 02:34:28 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id CAA24016 for questions-outgoing; Fri, 2 Jan 1998 02:34:28 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from NIH2WAAE (smtp5.site1.csi.com [149.174.183.74]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id CAA24009 for ; Fri, 2 Jan 1998 02:34:25 -0800 (PST) (envelope-from ranaivoa@cnam.fr) Received: from mail pickup service by csi.com with Microsoft SMTPSVC; Fri, 2 Jan 1998 05:33:54 -0500 Received: from CISPPP (pd02-205.par.compuserve.com [195.232.66.205]) by hil-img-ims-5.compuserve.com (8.8.6/8.8.6/IMS-1.0) with SMTP id FAA27412 for ; Fri, 2 Jan 1998 05:33:24 -0500 (EST) Message-ID: <2F0854FE.9AB@cnam.fr> Date: Mon, 02 Jan 1995 11:33:18 -0800 From: Gino RANAIVOARISOA Organization: CNAM X-Mailer: Mozilla 3.0b4Gold (Win16; I) MIME-Version: 1.0 To: questions@freebsd.org Subject: Is Etherlink III 3com 3c589d network card supported by freebsd 2.2.2 ? Content-Type: text/plain; charset=big5 Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Happy new year dear colleague, I would like to know if this type of network card "3com 3c589d" is supported by freebsd? Best regards, Gino RANAIVOARISOA e-mail: ranaivoa@cnam.fr From owner-freebsd-questions Fri Jan 2 02:42:22 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id CAA24454 for questions-outgoing; Fri, 2 Jan 1998 02:42:22 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from jim.htsa.hva.nl (jim.htsa.hva.nl [145.92.12.200]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id CAA24445 for ; Fri, 2 Jan 1998 02:42:14 -0800 (PST) (envelope-from robinh@jim.htsa.hva.nl) Received: from localhost (robinh@localhost) by jim.htsa.hva.nl (8.8.5/8.8.5) with SMTP id LAA01298 for ; Fri, 2 Jan 1998 11:54:34 +0100 (CET) Date: Fri, 2 Jan 1998 11:54:33 +0100 (CET) From: Robin Huiser To: FreeBSD Question List Subject: WordPerfect 7.0 ... Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Hi there! I have heard that Wp70 is running fine one FreeBSD with Linux Emulation. Where can I get a (demo) copy of this package, and what are the limitations? I have been using StarOffice for a while, but staying awake is my biggist problem! (It's very slow.......you know!) Greets, Robin Huiser Student Computer Science From owner-freebsd-questions Fri Jan 2 03:18:55 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id DAA25912 for questions-outgoing; Fri, 2 Jan 1998 03:18:55 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from luke.cpl.net (luke.cpl.net [209.150.73.2]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id DAA25900 for ; Fri, 2 Jan 1998 03:18:49 -0800 (PST) (envelope-from shawn@luke.cpl.net) Received: from localhost (shawn@localhost) by luke.cpl.net (8.8.8/8.6.12) with SMTP id DAA26050 for ; Fri, 2 Jan 1998 03:18:31 -0800 (PST) Date: Fri, 2 Jan 1998 03:18:31 -0800 (PST) From: Shawn Ramsey To: questions@freebsd.org Subject: radiusd Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Is there any way to get version 2.x of radiusd that works with both MD5 and DES passwords? Is source available for version 2? I can't seem to locate it... From owner-freebsd-questions Fri Jan 2 03:29:11 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id DAA26464 for questions-outgoing; Fri, 2 Jan 1998 03:29:11 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from zerium.newmedia.no (root@[194.198.117.68]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id DAA26452 for ; Fri, 2 Jan 1998 03:29:02 -0800 (PST) (envelope-from hanspb@persbraten.vgs.no) Received: from localhost (hanspbie@localhost [127.0.0.1]) by zerium.newmedia.no (8.8.8/8.8.7) with SMTP id MAA15023; Fri, 2 Jan 1998 12:28:47 +0100 (CET) Date: Fri, 2 Jan 1998 12:28:47 +0100 (CET) From: Hans Petter Bieker X-Sender: hanspbie@zerium.newmedia.no To: Robin Huiser cc: FreeBSD Question List Subject: Re: WordPerfect 7.0 ... In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Fri, 2 Jan 1998, Robin Huiser wrote: > Hi there! > > I have heard that Wp70 is running fine one FreeBSD with Linux Emulation. > Where can I get a (demo) copy of this package, and what are the > limitations? The software works for 30 days. You may only use it 15 days. Info is available from http://www.sdcorp.com/ WP7 works, but it has a securety hole. -bieker From owner-freebsd-questions Fri Jan 2 04:15:41 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id EAA28582 for questions-outgoing; Fri, 2 Jan 1998 04:15:41 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from mailhub.omen.com.au (root@mailhub.omen.com.au [203.8.107.50]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id EAA28575 for ; Fri, 2 Jan 1998 04:15:36 -0800 (PST) (envelope-from raven@omen.com.au) Received: from Raven.omen.com.au (orion1@ttyE70.quokka.omen.com.au [203.15.92.71]) by mailhub.omen.com.au (8.8.7/8.8.5) with SMTP id UAA13112 for ; Fri, 2 Jan 1998 20:15:29 +0800 Message-Id: <3.0.3.32.19980102201544.007a9160@mail.omen.com.au> X-Sender: raven@mail.omen.com.au X-Mailer: QUALCOMM Windows Eudora Pro Version 3.0.3 (32) Date: Fri, 02 Jan 1998 20:15:44 +0800 To: freebsd-questions@FreeBSD.ORG From: Raven Subject: DECStation 5000/200 ?? Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Dear Sir/Madam, I have heard that FreeBSD can replace Ultrix v4.2 or v4.3 operating system on a Digital Equipment Corp DECStation 5000/200. Is this true ? Thankyou for your time, Steve Hyland. ---------------------------------------------------------------------- RAVENSGATE PTY LTD Perth - Western Australia. raven@omen.com.au .-*-. .-*-. /##/##\ __ /##\##\ /#/##/##\(**)/##\##\#\ /##//##/*{ \/ }*\##\\##\ Open here I flung the shutter, when, //#///##//*####*\\##\\\#\\ with many a flirt and flutter, //*//// /'{##}'\ \\\\*\\ In there stepped a stately raven, // //||\\ \\ of the saintly days of yore. ===========nn=\/=nn=================================================== '//||\\` (THE RAVEN - E. A. Poe. - 1845) ---------------------------------------------------------------------- From owner-freebsd-questions Fri Jan 2 04:18:28 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id EAA28799 for questions-outgoing; Fri, 2 Jan 1998 04:18:28 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from emerald.accessv.com (emerald.accessv.com [206.221.248.8]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id EAA28789 for ; Fri, 2 Jan 1998 04:18:22 -0800 (PST) (envelope-from grobin@accessv.com) Received: from accessv.com (port020-86.accessv.com [209.50.86.20]) by emerald.accessv.com (8.8.5/8.8.5) with ESMTP id HAA29339; Fri, 2 Jan 1998 07:16:37 -0500 Message-ID: <34ACDAD4.866C8A6E@accessv.com> Date: Fri, 02 Jan 1998 07:17:24 -0500 From: Geoffrey Robinson Reply-To: grobin@accessv.com X-Mailer: Mozilla 4.03 [en] (Win95; U) MIME-Version: 1.0 To: Studded CC: questions@freebsd.org Subject: Re: Can't Access Apache Manual Files References: <19980101025059.4288.rocketmail@send1a.yahoomail.com> <34ABDB90.A2BDC76C@accessv.com> <34AC043C.A270AD3E@dal.net> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Studded wrote: > > Geoffrey Robinson wrote: > > > > I added the path /usr/apache/man to MANPATH in my .login file but man > > still doesn't have any apache data. I also tried man while my current > > directory was /usr/apache/man but it didn't work either. I'm afraid I > > know very little about how the man system works. > > With all due respect, you were already offered the solution that will > save you the most grief, namely "use the port." You should back up any > configuration files that you have already worked on, delete every trace > of the apache that you installed and install it again from the ports > collection. > > One excellent example of why the ports collection is a good idea is > that a patch for a recently uncovered security flaw in apache was > applied the same day it was made available. You have a whole team of > people looking out for you that are trying to make your life easier, > take advantage of that. :) > It is the apache-current port but I made it with the variable PREFIX=/etc/apache. I did this after removing a previous install of apache-current from /usr/local for organization and to isolate other program files so I know what belongs to Apache. I'm not sure but I think the Apache man files where not accessible when Apache 1.3a1 was installed in /usr/local either. Before that I had Apache 1.2.4 installed in /usr/local but I never used man to find anything for it so I don't know if it worked originally. I each case I used pkg_delete to uninstall the port but I recall having to manually remove Apache 1.3a1 form /use/local anyway. Maybe I left something behind. -Geoff From owner-freebsd-questions Fri Jan 2 04:34:38 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id EAA29377 for questions-outgoing; Fri, 2 Jan 1998 04:34:38 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from emerald.accessv.com (emerald.accessv.com [206.221.248.8]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id EAA29371 for ; Fri, 2 Jan 1998 04:34:34 -0800 (PST) (envelope-from grobin@accessv.com) Received: from accessv.com (port020-86.accessv.com [209.50.86.20]) by emerald.accessv.com (8.8.5/8.8.5) with ESMTP id HAA29572; Fri, 2 Jan 1998 07:32:52 -0500 Message-ID: <34ACDEA3.C693887E@accessv.com> Date: Fri, 02 Jan 1998 07:33:39 -0500 From: Geoffrey Robinson Reply-To: grobin@accessv.com X-Mailer: Mozilla 4.03 [en] (Win95; U) MIME-Version: 1.0 To: Rudy Gireyev CC: questions@freebsd.org Subject: Re: Can't Access Apache Manual Files References: <19980102085207.6076.rocketmail@send1b.yahoomail.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Rudy Gireyev wrote: > > ---Geoffrey Robinson wrote: > > > > I added the path /usr/apache/man to MANPATH in my .login file but man > > Make sure it made it into the path when you are running it. How? > > > still doesn't have any apache data. I also tried man while my current > > directory was /usr/apache/man but it didn't work either. I'm afraid I > > If the preiod (.) is not in the man path it will not look in the > current directory. I added './' to MANPATH but no luck. I was going to copy the Apache man pages into /usr/local/man or make a symbolic link but the Apache pages are buried in some large directory tree in /usr/apache/man that has the same structure as the /usr/local/man tree so I can't just copy them over. Any suggestions? -Geoff From owner-freebsd-questions Fri Jan 2 05:05:45 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id FAA00795 for questions-outgoing; Fri, 2 Jan 1998 05:05:45 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from silvester.zoom.es (root@silvester.zoom.es [195.76.150.4]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id FAA00790 for ; Fri, 2 Jan 1998 05:05:39 -0800 (PST) (envelope-from amora@zoom.es) Received: from zoom114.zoom.es (zoom114.zoom.es [195.76.150.114]) by silvester.zoom.es (8.7.5/8.7.3) with SMTP id PAA20458; Fri, 2 Jan 1998 15:10:21 +0100 Message-Id: <199801021410.PAA20458@silvester.zoom.es> Comments: Authenticated sender is From: "Jesus A. Mora Marin" To: victor@usac.edu.gt Date: Fri, 2 Jan 1998 14:04:58 +0100 Subject: Re: Informix Reply-to: amora@zoom.es CC: questions@FreeBSD.ORG Priority: normal References: In-reply-to: X-mailer: Pegasus Mail for Windows (v2.54) Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk > > I think your `no reply' should be taken as a `no one has convinced > Informix to work under FreeBSD.' > > Informix would probably have to be ported. Oracle, on the other hand, can > be tricked to run under the SCO emulator, if you have a SCO box available > to copy the libs off of. Instructions are in the mail archies at > http://www.freebsd.org. > > These are both commercial apps; convincing them to do a port to FreeBSD > usually takes some effort. > I've lost the original question, but I'd like to make you know what's my experience with Informix on FreeBSD. I'm currently running FreeBSD 2.2.5-RELEASE. AFAIK, Informix SQL, R4GL and Standard Engine version 4.00 run fine with this release. Well, there is what I consider an "aesthetical" nuisance": when the Standard Engine is shutting down, it dies with a signal 10. But, with the exception of this minor "misfeature", and always according to my own experience, it does work. Note that with FreeBSD 2.1.0-RELEASE, Informix 4.00 didn't work, but I think that the iBCS2 support has been greatly enhanced after that release. On the other hand, version 4.10 of the Standard Engine dies miserably with a signal 10, as soon as it does "open database". I can't tell about any other product or later versions of Informix. Jesus ------ Jesus A. Mora Marin, MD. (aka EA7HAC, ex-EC7DVE) Tecnico de la Funcion Administrativa. Analisis de Aplicaciones, Programacion y Administracion de Sistemas. Servicio de Informacion e Informatica Hospitalaria - HVM-Servicio Andaluz de Salud. From owner-freebsd-questions Fri Jan 2 05:21:11 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id FAA01409 for questions-outgoing; Fri, 2 Jan 1998 05:21:11 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from mail.cs.tu-berlin.de (root@mail.cs.tu-berlin.de [130.149.17.13]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id FAA01403 for ; Fri, 2 Jan 1998 05:21:07 -0800 (PST) (envelope-from wosch@cs.tu-berlin.de) Received: from panke.panke.de (anonymous230.ppp.cs.tu-berlin.de [130.149.17.230]) by mail.cs.tu-berlin.de (8.8.6/8.8.8) with ESMTP id NAA24719; Fri, 2 Jan 1998 13:44:45 +0100 (MET) Received: (from wosch@localhost) by panke.panke.de (8.8.5/8.6.12) id NAA00767; Fri, 2 Jan 1998 13:23:41 +0100 (MET) To: "Francisco Reyes" Cc: "FreeBSD questions" Subject: Re: What settings for viewing spanish characters? References: <199801020427.UAA21324@super.zippo.com> From: Wolfram Schneider Date: 02 Jan 1998 13:23:38 +0100 In-Reply-To: "Francisco Reyes"'s message of Thu, 01 Jan 98 23:24:06 -0400 Message-ID: Lines: 19 Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Set the TERM variable to `cons25l1' in your ~/.profile or in /etc/ttys. "Francisco Reyes" writes: > What settings do I need to change to be able to see Spanish > characters (ie spanish n and letters with accents). > > I tried changing the "system console" to ISO88591 and I could see the > characters in the command line by holding down my ALT key and pressin > their ASCII values, but then /stand/sysinstall's borders got changed > to funny characters. > > I also couldn't figure out how to set Netscape to see those > characters. -- Wolfram Schneider http://www.freebsd.org/~wosch/ From owner-freebsd-questions Fri Jan 2 06:21:39 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id GAA04094 for questions-outgoing; Fri, 2 Jan 1998 06:21:39 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from atsic.gov.au ([203.61.214.2]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id GAA04002 for ; Fri, 2 Jan 1998 06:20:16 -0800 (PST) (envelope-from Paul.Tero@atsic.gov.au) Received: by firewall.atsic.gov.au id <28741>; Sat, 3 Jan 1998 01:20:36 +1100 Message-Id: <98Jan3.012036est.28741@firewall.atsic.gov.au> From: TERO Paul To: "'freebsd-questions@FreeBSD.ORG'" Subject: Dial-in and Dial-Out ISP Date: Sat, 3 Jan 1998 01:06:28 +1100 X-Priority: 3 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.0.1458.49) Content-Type: text/plain Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Hi, I'm wanting to set up an low-cost internet (mail-only at this stage) node for various "bush-communities" here in the centre of Australia. It seems that FreeBSD is the way to go. However, the concept that I have is similar to Netmail and BBS nodes that toss and scan for mail. I want the communities to be able to dial into this node to either collect and/or receive email. The node will then be scheduled to dial into a live internet node (say twice a day) and exchange my clients email. This way I don't have to pay for expensive live internet connections in an environment where there is little traffic and low line speed available (as low as 1200 baud in some circumstances). Your thoughts please. Is this possible with FreeBSD? Thanks in advance. Paul Tero IT Officer ATSIC, Alice Springs Australia. From owner-freebsd-questions Fri Jan 2 06:48:35 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id GAA05282 for questions-outgoing; Fri, 2 Jan 1998 06:48:35 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from ns1.hexanet.fr (ns1.hexanet.fr [195.10.22.1]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id GAA05274 for ; Fri, 2 Jan 1998 06:48:29 -0800 (PST) (envelope-from nighty@hexanet.fr) Received: from ns3.hexanet.fr (ns3.hexanet.fr [195.10.22.3]) by ns1.hexanet.fr (8.8.5/8.8.5) with SMTP id PAA18894 for ; Fri, 2 Jan 1998 15:53:57 +0100 (MET) Message-ID: X-Mailer: XFMail 1.1 [p0] on FreeBSD Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: Date: Fri, 02 Jan 1998 15:45:04 +0100 (CET) Organization: HEXANET From: Christophe Prevotaux To: questions@freebsd.org Subject: KDE under FreeBSD ? Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Can KDE http://www.kde.org/ run under FreeBSD ? -- =================================================================== Christophe Prevotaux | HEXANET SARL HEXANET System Administrator | Z.A Farman Sud | 9 rue Roland Coffignot Email: nighty@hexanet.fr | BP415 51689 Reims Cedex 2 FRANCE Irc: nighty | Tel: +33 (0)3 26 79 30 05 URL: http://www.hexanet.fr/ | Fax: +33 (0)3 26 79 30 06 =================================================================== ISP/IAP | WEB Developement | Intranet | Network Administration Custom Software Development| Network Installation | Leased Lines =================================================================== From owner-freebsd-questions Fri Jan 2 06:54:31 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id GAA05676 for questions-outgoing; Fri, 2 Jan 1998 06:54:31 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from gatekeeper.barcode.co.il (gatekeeper.barcode.co.il [192.116.93.17]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id GAA05670 for ; Fri, 2 Jan 1998 06:54:25 -0800 (PST) (envelope-from nadav@barcode.co.il) Received: from localhost (nadav@localhost) by gatekeeper.barcode.co.il (8.8.7/8.8.7) with SMTP id QAA08954; Fri, 2 Jan 1998 16:52:25 +0200 (IST) (envelope-from nadav@gatekeeper.barcode.co.il) Date: Fri, 2 Jan 1998 16:52:24 +0200 (IST) From: Nadav Eiron To: Raven cc: freebsd-questions@FreeBSD.ORG Subject: Re: DECStation 5000/200 ?? In-Reply-To: <3.0.3.32.19980102201544.007a9160@mail.omen.com.au> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Fri, 2 Jan 1998, Raven wrote: > Dear Sir/Madam, > > I have heard that FreeBSD can replace Ultrix v4.2 or v4.3 operating system > on a Digital Equipment Corp DECStation 5000/200. Is this true ? No. FreeBSD only runs on PCs based on the Intel architecture. However, NetBSD has a port to the DECStations (see http://www.netbsd.org). OpenBSD may also have such a port, though I'm not sure (see http://www.openbsd.org). > > Thankyou for your time, > > > Steve Hyland. > ---------------------------------------------------------------------- > RAVENSGATE PTY LTD Perth - Western Australia. > raven@omen.com.au > .-*-. .-*-. > /##/##\ __ /##\##\ > /#/##/##\(**)/##\##\#\ > /##//##/*{ \/ }*\##\\##\ Open here I flung the shutter, when, > //#///##//*####*\\##\\\#\\ with many a flirt and flutter, > //*//// /'{##}'\ \\\\*\\ In there stepped a stately raven, > // //||\\ \\ of the saintly days of yore. > ===========nn=\/=nn=================================================== > '//||\\` (THE RAVEN - E. A. Poe. - 1845) > > ---------------------------------------------------------------------- > > Nadav From owner-freebsd-questions Fri Jan 2 06:55:42 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id GAA05802 for questions-outgoing; Fri, 2 Jan 1998 06:55:42 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from mail.webspan.net (root@mail.webspan.net [206.154.70.7]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id GAA05793 for ; Fri, 2 Jan 1998 06:55:38 -0800 (PST) (envelope-from vincent@webspan.net) Received: from webspan.net (usr1-03.nwk.nj.webspan.net [206.152.175.23]) by mail.webspan.net (WEBSPAN/970608) with ESMTP id JAA28403 for ; Fri, 2 Jan 1998 09:54:55 -0500 (EST) Message-ID: <34AD00A0.F48BAC97@webspan.net> Date: Fri, 02 Jan 1998 09:58:40 -0500 From: vinny omoyi Reply-To: vincent@webspan.net Organization: VRGC X-Mailer: Mozilla 4.04 [en] (Win95; I) MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: FreeBSD Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Hi. I have a site at http://www.webspan.net/~vincent/ and I was wondering how I can use Free BSD and in what ways that would help me on my site. For the 2nd time I have read your page to try and see how I can use it but for some reason am not clicking it. Please help. I checked out most of the examples of pages that are of satisfied Free BSD users. From owner-freebsd-questions Fri Jan 2 06:57:20 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id GAA05986 for questions-outgoing; Fri, 2 Jan 1998 06:57:20 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from rvc1.informatik.ba-stuttgart.de (rvc1.informatik.ba-stuttgart.de [141.31.112.22]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id GAA05969; Fri, 2 Jan 1998 06:57:08 -0800 (PST) (envelope-from helbig@Informatik.BA-Stuttgart.DE) Received: (from helbig@localhost) by rvc1.informatik.ba-stuttgart.de (8.8.8/8.8.5) id PAA07971; Fri, 2 Jan 1998 15:56:42 +0100 (MET) From: Wolfgang Helbig Message-Id: <199801021456.PAA07971@rvc1.informatik.ba-stuttgart.de> Subject: Re: SOLVED: International characters in vi are displayed as hex? In-Reply-To: <34ACB9BF.935CB4C3@we.lc.ehu.es> from "Jose M. Alcaide" at "Jan 2, 98 10:56:15 am" To: jose@we.lc.ehu.es (Jose M. Alcaide) Date: Fri, 2 Jan 1998 15:56:42 +0100 (MET) Cc: freebsd-questions@FreeBSD.ORG, pol@leissner.se, helbig@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL30 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk > Wolfgang Helbig wrote: > > > > That's because the file LC_TIME is missing in the directory > > /usr/share/locale/es_ES.ISO_8859-1. If called with "LC_ALL", > > setlocale(3) returns with an error ("No such file or directory") > > without trying to load LC_CTYPE. > > > > So the fix is to provide a spanish LC_TIME file. You find sources > > for other LC_TIME files in /usr/src/share/timedef/data. To build a > > LC_TIME file from it's source, you only have to delete the comment > > lines. > > This solution can be also applied to the other locales, such > as sv_SE.ISO_8859-1. I have created the LC_TIME file for > the spanish locale, and everything works fine now. Thanks Wolfgang! You're welcome! In the meantime I checked in your file into the -current source tree, but didn't close the problem yet, because other LC_TIME files are still missing. (See also problem conf/5409) So I ask people from those countries to send me LC_TIME files (in source form, i. e. with the comment lines like in /usr/src/share/timedef/data/*.src). You can test your files by deleting the commentlines, installing it in the locale directory (e. g. /usr/share/locale/es_ES...) setting the LANG environment variable accordingly and running cal(1). The LC_TIME files are missing for these locales: fi_FI.ISO_8859-1 lt_LN.ASCII lt_LN.ISO_8859-1 lt_LN.ISO_8859-2 nl_BE.ISO_8859-1 nl_NL.ISO_8859-1 sv_SE.ISO_8859-1 I do not know, what language/country lt/LN belongs to. The others are Finland, Belgium, Netherlands and Sveden. (at least that's what I learned from /usr/share/misc/iso3166.) Thanks again for your file, Jose and thanks in advance for the others :-) Wolfgang From owner-freebsd-questions Fri Jan 2 07:42:21 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id HAA08146 for questions-outgoing; Fri, 2 Jan 1998 07:42:21 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from gatekeeper.barcode.co.il (gatekeeper.barcode.co.il [192.116.93.17]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id HAA08141 for ; Fri, 2 Jan 1998 07:42:16 -0800 (PST) (envelope-from nadav@barcode.co.il) Received: from localhost (nadav@localhost) by gatekeeper.barcode.co.il (8.8.7/8.8.7) with SMTP id RAA09046; Fri, 2 Jan 1998 17:39:58 +0200 (IST) (envelope-from nadav@gatekeeper.barcode.co.il) Date: Fri, 2 Jan 1998 17:39:58 +0200 (IST) From: Nadav Eiron To: Gordon Wang cc: freebsd-questions@FreeBSD.ORG Subject: Re: netscape install? In-Reply-To: <34AC8F45.5B47@tpts5.seed.net.tw> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Fri, 2 Jan 1998, Gordon Wang wrote: > Dear Sir > I am a FreeBSD 2.2.1 user. > I just unpacked the netscape file: > "navigator-v404-export.x86-unknown-freebsd.tar.gz" > in the directory /usr/local/netscape . > But when I typed the executable files "ns-install" or > "netscape" to install netscape, I got "command not found". That's because the directory is not in your path. Use the full path name, or if you're in the directory containing those files, simply say ./ns-install > What should I do to install netscape. Probably be better off installing the port. See the handbook section on ports for instructions on installing them. > Please help me > Thank you very much > > Gordon > > Nadav From owner-freebsd-questions Fri Jan 2 07:47:09 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id HAA08414 for questions-outgoing; Fri, 2 Jan 1998 07:47:09 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from dihelix.com (caliban.dihelix.com [198.180.136.122]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id HAA08405 for ; Fri, 2 Jan 1998 07:47:05 -0800 (PST) (envelope-from langfod@dihelix.com) Received: (from langfod@localhost) by dihelix.com (8.8.7/8.8.8) id FAA07616 for questions@freebsd.org; Fri, 2 Jan 1998 05:47:02 -1000 (HST) (envelope-from langfod) Date: Fri, 2 Jan 1998 05:47:02 -1000 (HST) From: David Langford Message-Id: <199801021547.FAA07616@dihelix.com> To: questions@freebsd.org Subject: Unknown class? (login getclass) Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Just curious what this means in syslog: Jan 2 00:14:35 foobar su: login_getclass: unknown class 'C70609A' This is from an older 2.2-STABLE (early July build) Thanks, -David Langford langfod@dihelix.com From owner-freebsd-questions Fri Jan 2 08:00:27 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id IAA08997 for questions-outgoing; Fri, 2 Jan 1998 08:00:27 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from cam.grad.kiev.ua (grad-UTC-28k8.ukrtel.net [195.5.25.54]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id IAA08974 for ; Fri, 2 Jan 1998 08:00:19 -0800 (PST) (envelope-from Ruslan@Shevchenko.kiev.ua) Received: from Shevchenko.kiev.ua (localhost [127.0.0.1]) by cam.grad.kiev.ua (8.8.8/8.8.5) with ESMTP id RAA21055; Thu, 1 Jan 1998 17:57:25 GMT Message-ID: <34ABD8FC.CBE266E4@Shevchenko.kiev.ua> Date: Thu, 01 Jan 1998 17:57:18 +0000 From: Ruslan Shevchenko X-Mailer: Mozilla 4.04 [en] (X11; I; FreeBSD 2.2.5-STABLE i386) MIME-Version: 1.0 To: TERO Paul CC: freebsd-questions@freebsd.org Subject: Re: Dial-in and Dial-Out ISP References: <98Jan3.012036est.28741@firewall.atsic.gov.au> Content-Type: text/plain; charset=koi8-r Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk TERO Paul wrote: > Hi, > > I'm wanting to set up an low-cost internet (mail-only at this stage) > node for various "bush-communities" here in the centre of Australia. > > It seems that FreeBSD is the way to go. > > However, the concept that I have is similar to Netmail and BBS nodes > that toss and scan for mail. > > I want the communities to be able to dial into this node to either > collect and/or receive email. The node will then be scheduled to dial > into a live internet node (say twice a day) and exchange my clients > email. > > This way I don't have to pay for expensive live internet connections in > an environment where there is little traffic and low line speed > available (as low as 1200 baud in some circumstances). > > Your thoughts please. Is this possible with FreeBSD? > Yes, via uucp.type (man uucp / info uucp) for documentation. You must setup uucp and add uucp mailer to you sendmail config. > Thanks in advance. > > Paul Tero > IT Officer > ATSIC, Alice Springs > Australia. From owner-freebsd-questions Fri Jan 2 08:15:13 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id IAA09861 for questions-outgoing; Fri, 2 Jan 1998 08:15:13 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from www.dancooks.com (www.dancooks.com [204.180.122.2]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id IAA09855 for ; Fri, 2 Jan 1998 08:15:08 -0800 (PST) (envelope-from jason@www.dancooks.com) Received: from localhost (jason@localhost) by www.dancooks.com (8.8.8/8.8.7) with SMTP id KAA20853 for ; Fri, 2 Jan 1998 10:19:57 -0600 (CST) (envelope-from jason@www.dancooks.com) Date: Fri, 2 Jan 1998 10:19:57 -0600 (CST) From: Jason Hudgins To: questions@freebsd.org Subject: Good backup hardware???? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I have a need for solid automated backups on my companies webserver, so far I've tried both an HP DAT drive and Seagate DAT. The HP didn't live to long, and the Seagates performance has been laughable at best. I've only gotten a successful backup about 10% of the time. I need a system that can backup about 5 gigs of data daily. Here are the tails my last two logged attempts.. DUMP: 89.11% done, finished in 0:09 DUMP: write error 1964580 blocks into volume 1 DUMP: fopen on /dev/tty fails: Device not configured DUMP: The ENTIRE dump is aborted. DUMP: estimated 2117660 tape blocks. DUMP: write error 20 blocks into volume 1 DUMP: fopen on /dev/tty fails: Device not configured DUMP: The ENTIRE dump is aborted. Can anyone offer any suggestions? Jason Hudgins From owner-freebsd-questions Fri Jan 2 08:20:58 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id IAA10286 for questions-outgoing; Fri, 2 Jan 1998 08:20:58 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from URIACC.URI.EDU (URIACC.URI.EDU [131.128.1.1]) by hub.freebsd.org (8.8.7/8.8.7) with SMTP id IAA10256 for ; Fri, 2 Jan 1998 08:20:51 -0800 (PST) (envelope-from moba0574@uriacc.uri.edu) Received: from *unknown [129.190.89.6] by URIACC.URI.EDU (IBM VM SMTP V2R3a) via TCP with SMTP ; Fri, 02 Jan 1998 10:57:56 EST X-Warning: URIACC.URI.EDU: Could not confirm that host [129.190.89.6] is 129.190.89.6 Message-ID: <34ACD79A.3588@uriacc.uri.edu> Date: Fri, 02 Jan 1998 12:03:38 +0000 From: Michael Obara Reply-To: moba0574@uriacc.uri.edu X-Mailer: Mozilla 3.01Gold (Macintosh; I; 68K) MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: FreeBSD and DSPs Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk I'm interested in using the UNIX 'ls' command on a UNIX-formatted tape drive mounted on a Texas Instruments C40 digital signal processing chip. To do this, I need the C code for the 'ls' function. Do you make any or your source code available? If not, do you know anywhere that I might be able to find code which will be able to list all files in a UNIX directory? If not, do you know where I can get info about the method by which UNIX stores file information? I know that this not what you do, but it is for a project and I am stuck. Thank you, Michael Obara From owner-freebsd-questions Fri Jan 2 08:37:11 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id IAA11378 for questions-outgoing; Fri, 2 Jan 1998 08:37:11 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from italy.it.earthlink.net (italy-c.it.earthlink.net [204.250.46.18]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id IAA11372 for ; Fri, 2 Jan 1998 08:37:08 -0800 (PST) (envelope-from shansen@iceland-c.it.earthlink.net) Received: from main (pool012-max1.gardena-ca-us.dialup.earthlink.net [207.217.21.162]) by italy.it.earthlink.net (8.8.7/8.8.5) with SMTP id IAA03079 for ; Fri, 2 Jan 1998 08:37:06 -0800 (PST) Message-Id: <199801021637.IAA03079@italy.it.earthlink.net> Comments: Authenticated sender is From: "Skip Hansen" To: freebsd-questions@freebsd.org Date: Fri, 2 Jan 1998 08:37:43 +0000 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: xfree86 3.3.1 & FreeBSD 2.2.5 & Mach32 sync problem Reply-to: shansen@earthlink.net Priority: normal X-mailer: Pegasus Mail for Win32 (v2.54) Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I've been using FreeBSD and Xfree86 with the Mach32 X server for several years without problem. Recently I upgraded from FreeBSD 2.1.6 to 2.2.5 with Xfree 3.3.1 and I'm now having a minor problem that's driving me crazy. The problem is that when I exit X (or switch to a text mode virtual console) my monitor loses horizontal sync. Using vidcontrol to reset the console mode does not restore sync. The only thing that will get the monitor to sync again is a complete system restart. The generic VGA256 server does not have this problem. I've recompiled the Mach32 server from sources and it does exactly the same thing. I've looked at Mach32 server deltas from 3.1.1 to 3.3.1 and nothing jumped out at me. Looks like the biggest changes were the addition of support for 24 bpp (I'm using 8) and support for the XDGA extension. I built a server with XDGA disabled and that didn't help. The only other thing I saw was some changes for an AST version of the Mach32, I've verified that the AST switch was not set. I don't believe this is a kernel problem since the generic VGA server works correctly. Does anyone have any suggestions on how to fix this ? I'm also open to suggestions as to a better forum for this questions since I don't think it's a FreeBSD problem. (I've posted to comp.windows.x.i386 but didn't get many responses.) Skip Hansen From owner-freebsd-questions Fri Jan 2 08:47:20 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id IAA12268 for questions-outgoing; Fri, 2 Jan 1998 08:47:20 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from emu.sourcee.com (emu.sourcee.com [199.201.159.173]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id IAA12262 for ; Fri, 2 Jan 1998 08:47:13 -0800 (PST) (envelope-from nrice@emu.sourcee.com) Received: (from nrice@localhost) by emu.sourcee.com (8.8.8/8.8.3) id LAA20303; Fri, 2 Jan 1998 11:46:55 -0500 (EST) Message-ID: <19980102114655.59739@emu.sourcee.com> Date: Fri, 2 Jan 1998 11:46:55 -0500 From: Norman C Rice To: David Langford Cc: questions@freebsd.org Subject: Re: Unknown class? (login getclass) References: <199801021547.FAA07616@dihelix.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.88 In-Reply-To: <199801021547.FAA07616@dihelix.com>; from David Langford on Fri, Jan 02, 1998 at 05:47:02AM -1000 Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk On Fri, Jan 02, 1998 at 05:47:02AM -1000, David Langford wrote: > > Just curious what this means in syslog: > > Jan 2 00:14:35 foobar su: login_getclass: unknown class 'C70609A' > > This is from an older 2.2-STABLE (early July build) > > > Thanks, > > -David Langford > langfod@dihelix.com I believe it indicates that the login class, `C70609A' isn't in the login capability database. If the ASCII source, `/etc/login.conf' doesn't exist and you installed the sources, as root try cp /usr/src/etc/login.conf /etc/login.conf /usr/bin/cap_mk_db /etc/login.conf If `/etc/login.cong' exists, as root try rebuilding the indexes with /usr/bin/cap_mk_db /etc/login.conf which should create `/etc/login.conf.db'. See login.conf(5). -- Regards, Norman C. Rice, Jr. From owner-freebsd-questions Fri Jan 2 08:50:25 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id IAA12599 for questions-outgoing; Fri, 2 Jan 1998 08:50:25 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from zerium.newmedia.no (root@[194.198.117.67]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id IAA12582 for ; Fri, 2 Jan 1998 08:50:16 -0800 (PST) (envelope-from hanspb@persbraten.vgs.no) Received: from localhost (hanspbie@localhost [127.0.0.1]) by zerium.newmedia.no (8.8.8/8.8.7) with SMTP id RAA17285; Fri, 2 Jan 1998 17:50:14 +0100 (CET) Date: Fri, 2 Jan 1998 17:50:14 +0100 (CET) From: Hans Petter Bieker X-Sender: hanspbie@zerium.newmedia.no To: Christophe Prevotaux cc: questions@FreeBSD.ORG Subject: Re: KDE under FreeBSD ? In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Fri, 2 Jan 1998, Christophe Prevotaux wrote: > Can KDE http://www.kde.org/ run under FreeBSD ? Yes, just use the port. (it needs /usr/bin/moc -- should be /usr/X11r6/bin/moc btw.) -bieker From owner-freebsd-questions Fri Jan 2 08:59:18 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id IAA13468 for questions-outgoing; Fri, 2 Jan 1998 08:59:18 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from aramis.ourway.com (aramis.ourway.com [207.86.0.131]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id IAA13460 for ; Fri, 2 Jan 1998 08:59:15 -0800 (PST) (envelope-from reese@chem.duke.edu) Received: from mink.adeptscience.co.uk (mink.adeptscience.co.uk [193.119.170.57]) by aramis.ourway.com (8.8.5/8.8.5) with SMTP id MAA18928 for ; Fri, 2 Jan 1998 12:58:28 -0500 (EST) Message-Id: <1.5.4.32.19980103003950.006eec10@chem.duke.edu> X-Sender: reese@chem.duke.edu X-Mailer: Windows Eudora Light Version 1.5.4 (32) Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Date: Fri, 02 Jan 1998 16:39:50 -0800 To: questions@FreeBSD.ORG From: Charles Reese Subject: Network problem with Novell 4.11 Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk I am setting up a FreeBSD machine (2.2.5R) using a 3C509 ethernet card. If I connect the machine to a network which has TCP/IP, IPX/SPX and NetBEUI traffic running on it (and in addition Win95 machines list 3 Com DMI Agent and IPX-32 bit protocol for netware Client 32) the FreeBSD can neither see any other machines nor be seen by any other machines. It does complain of getting an unknown packet on an unexpected port from the Novell server. If the same machine is connected to a different (sub) network that is running only TCP/IP traffic all is well and in fact it can ping, telnet etc to machines on the Novell network. Is there something else that must be configured for FreeBSD to run on a Novell lan? Cheers Charlie Reese -------------------------------------------------------------------------- Charles Reese, PhD * STAY IN TOUCH WITH YOUR CUSTOMERS BY EMAIL. * 919-544-7217 * Run your own Majordomo email list in your own * reese@ourway.com * virtual domain using the simple MajorCool web * www.ourway.com * interface. * * Very low setup and monthly rates. * -------------------------------------------------------------------------- From owner-freebsd-questions Fri Jan 2 09:00:51 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id JAA13717 for questions-outgoing; Fri, 2 Jan 1998 09:00:51 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from localhost.zilker.net (jump-x2-1077.jumpnet.com [207.8.67.77]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id JAA13707 for ; Fri, 2 Jan 1998 09:00:47 -0800 (PST) (envelope-from marquard@zilker.net) Received: (from marquard@localhost) by localhost.zilker.net (8.8.8/8.8.3) id LAA12057; Fri, 2 Jan 1998 11:00:40 -0600 (CST) To: freebsd-questions@freebsd.org Subject: Re: KDE under FreeBSD ? References: From: Dave Marquardt Date: 02 Jan 1998 11:00:09 -0600 In-Reply-To: Christophe Prevotaux's message of "Fri, 02 Jan 1998 15:45:04 +0100 (CET)" Message-ID: <85pvma7qw6.fsf@localhost.zilker.net> Lines: 7 X-Mailer: Quassia Gnus v0.17/XEmacs 19.16 - "Lille" Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Christophe Prevotaux writes: > Can KDE http://www.kde.org/ run under FreeBSD ? Well, it's in the FreeBSD ports collection, so I assume that it can indeed run under FreeBSD. -Dave From owner-freebsd-questions Fri Jan 2 09:19:14 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id JAA16105 for questions-outgoing; Fri, 2 Jan 1998 09:19:14 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from ns1.hexanet.fr (ns1.hexanet.fr [195.10.22.1]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id JAA16066 for ; Fri, 2 Jan 1998 09:18:51 -0800 (PST) (envelope-from nighty@hexanet.fr) Received: from ns3.hexanet.fr (ns3.hexanet.fr [195.10.22.3]) by ns1.hexanet.fr (8.8.5/8.8.5) with SMTP id SAA19889; Fri, 2 Jan 1998 18:22:55 +0100 (MET) Message-ID: X-Mailer: XFMail 1.1 [p0] on FreeBSD Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: Date: Fri, 02 Jan 1998 18:15:18 +0100 (CET) Organization: HEXANET From: Christophe Prevotaux To: Hans Petter Bieker Subject: Re: KDE under FreeBSD ? Cc: questions@FreeBSD.ORG Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On 02-Jan-98 Hans Petter Bieker wrote: >On Fri, 2 Jan 1998, Christophe Prevotaux wrote: > >> Can KDE http://www.kde.org/ run under FreeBSD ? > >Yes, just use the port. > >(it needs /usr/bin/moc -- should be /usr/X11r6/bin/moc btw.) > >-bieker Yes but the port is not up to date the BETA1 of kdenetworks is now BETA2 -- =================================================================== Christophe Prevotaux | HEXANET SARL HEXANET System Administrator | Z.A Farman Sud | 9 rue Roland Coffignot Email: nighty@hexanet.fr | BP415 51689 Reims Cedex 2 FRANCE Irc: nighty | Tel: +33 (0)3 26 79 30 05 URL: http://www.hexanet.fr/ | Fax: +33 (0)3 26 79 30 06 =================================================================== ISP/IAP | WEB Developement | Intranet | Network Administration Custom Software Development| Network Installation | Leased Lines =================================================================== From owner-freebsd-questions Fri Jan 2 09:32:11 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id JAA17435 for questions-outgoing; Fri, 2 Jan 1998 09:32:11 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from europa.com (thetics.europa.com [199.2.194.14]) by hub.freebsd.org (8.8.7/8.8.7) with SMTP id JAA17373 for ; Fri, 2 Jan 1998 09:31:55 -0800 (PST) (envelope-from james.digitalmechanix.com!jimmy@europa.com) Received: from localhost (541 bytes) by europa.com via rmail with P:stdio/R:inet_hosts/T:smtp (sender: ) (ident using unix) id for ; Fri, 2 Jan 1998 09:31:13 -0800 (PST) (Smail-3.2.0.98 1997-Oct-16 #2 built 1997-Oct-19) Received: (from jimmy@localhost) by james.digitalmechanix.com (8.8.5/8.8.5) id JAA00982 for questions@freebsd.org; Fri, 2 Jan 1998 09:30:03 -0800 (PST) Date: Fri, 2 Jan 1998 09:30:03 -0800 (PST) From: "James D. Fowler" Message-Id: <199801021730.JAA00982@james.digitalmechanix.com> To: questions@freebsd.org Subject: man pages Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk how do I install a single man page? thanx jimmy From owner-freebsd-questions Fri Jan 2 09:32:51 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id JAA17522 for questions-outgoing; Fri, 2 Jan 1998 09:32:51 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from base486.home.org (root@imdave.pr.mcs.net [205.164.3.77]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id JAA17503 for ; Fri, 2 Jan 1998 09:32:42 -0800 (PST) (envelope-from imdave@mcs.net) Received: (from imdave@localhost) by base486.home.org (8.8.8/8.8.8) id LAA04387; Fri, 2 Jan 1998 11:26:55 -0600 (CST) Date: Fri, 2 Jan 1998 11:26:55 -0600 (CST) From: Dave Bodenstab Message-Id: <199801021726.LAA04387@base486.home.org> To: dakott@alpha.delta.edu, freebsd-questions@FreeBSD.ORG Subject: Re: logging ipfirewall LOG directives through syslogd Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Your question tickled my curiosity... > From: David Kott > I use the kernel IP firewall and use the "log" directive to alert me > to possibly nefarious network traffic. However, I would like to channel > these messages through the syslog facility. I added some code to the > kernel ip firewall to (apparently) log messages via the syslog() > interface. This is an example of what I added to: It sounds to me like you already know most of this... but one thing you you should do is dig a little deeper and follow your inferences one more step. It's been a long time since I hacked the kernel, but a good rule of thumb is to copy that which is already done. In this case, you need to find out how the kernel logs other messages to syslog. The first log message that came to my mind was the ``pid ? uid ? exited on signal ?'' message. A quick fgrep in /sys/kern/*.c for ``core'' got me: kern_sig.c:coredump(p) which showed me: log(LOG_INFO, "pid %d: %s: uid %d: exited on signal %d\n", p->p_pid, p->p_comm, p->p_ucred->cr_uid, signum); Following the calls to log: log() [subr_prf.c] -> logpri() [subr_prf.c] log() -> kprintf(..TOLOG..) [subr_prf.c] log() -> logwakeup() [subr_log.c] Hmmm... there does not seem to be anything setting the ``program name'' for the kernel syslog messages. Next, looking in /usr/src/usr.sbin/syslogd/syslogd.c, in function printsys() there is: (void)strcpy(line, getbootfile()); (void)strcat(line, ": "); So, it looks to me that the ``program name'' for kernel messages comes from syslogd which gets it from getbootfile(). I now must mention that this is where I stopped. I can't be sure without actually doing some coding and testing, but it sure looks like: 1. The syslog is effectively already "open" for the kernel and there is no need for an openlog() call. Another grep thru *all* kernel source confirmed that there is no ``openlog'' function -- of course the kernel link already said this ;-) 2. The call to log() writes a syslog message -- there is no syslog() function. Again, the kernel link confirms this. 3. Since syslogd is setting the ``program name'' for kernel messages, there is no way for the kernel to log anything under another name (such as "ipfw") Hope this gets you a little further. Keep the list informed of your progress. Good luck. Dave Bodenstab imdave@mcs.net From owner-freebsd-questions Fri Jan 2 09:33:09 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id JAA17574 for questions-outgoing; Fri, 2 Jan 1998 09:33:09 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from picnic.mat.net (picnic.mat.net [206.246.122.117]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id JAA17554 for ; Fri, 2 Jan 1998 09:33:00 -0800 (PST) (envelope-from chuckr@glue.umd.edu) Received: from localhost (chuckr@localhost) by picnic.mat.net (8.8.8/8.8.5) with SMTP id MAA07127; Fri, 2 Jan 1998 12:30:40 -0500 (EST) Date: Fri, 2 Jan 1998 12:30:40 -0500 (EST) From: Chuck Robey X-Sender: chuckr@localhost To: Gordon Wang cc: freebsd-questions@FreeBSD.ORG Subject: Re: netscape install? In-Reply-To: <34AC8F45.5B47@tpts5.seed.net.tw> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Fri, 2 Jan 1998, Gordon Wang wrote: > Dear Sir > I am a FreeBSD 2.2.1 user. > I just unpacked the netscape file: > "navigator-v404-export.x86-unknown-freebsd.tar.gz" > in the directory /usr/local/netscape . > But when I typed the executable files "ns-install" or > "netscape" to install netscape, I got "command not found". > What should I do to install netscape. I'd suggest using the FreeBSD netscape port, which will handle the install for you. It's in the www/netscape4 directory. > Please help me > Thank you very much > > Gordon > > > ----------------------------+----------------------------------------------- Chuck Robey | Interests include any kind of voice or data chuckr@glue.umd.edu | communications topic, C programming, and Unix. 213 Lakeside Drive Apt T-1 | Greenbelt, MD 20770 | I run Journey2 and picnic, both FreeBSD (301) 220-2114 | version 3.0 current -- and great FUN! ----------------------------+----------------------------------------------- From owner-freebsd-questions Fri Jan 2 09:53:46 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id JAA18993 for questions-outgoing; Fri, 2 Jan 1998 09:53:46 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from argon.linkzone.com (argon.linkzone.com [204.182.59.32]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id JAA18985 for ; Fri, 2 Jan 1998 09:53:39 -0800 (PST) (envelope-from mlt@linkzone.com) Received: from localhost (mlt@localhost) by argon.linkzone.com (8.8.7/8.8.5) with SMTP id JAA05685; Fri, 2 Jan 1998 09:52:01 -0800 (PST) Date: Fri, 2 Jan 1998 09:52:01 -0800 (PST) From: Mark Turrin To: Gordon Wang cc: freebsd-questions@FreeBSD.ORG Subject: Re: netscape install? In-Reply-To: <34AC8F45.5B47@tpts5.seed.net.tw> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Fri, 2 Jan 1998, Gordon Wang wrote: > Dear Sir > I am a FreeBSD 2.2.1 user. > I just unpacked the netscape file: > "navigator-v404-export.x86-unknown-freebsd.tar.gz" > in the directory /usr/local/netscape . > But when I typed the executable files "ns-install" or > "netscape" to install netscape, I got "command not found". > What should I do to install netscape. > Please help me > Thank you very much Be sure you are typing a filename that is executable. Use the syntax ./filename to start the program. The "./" makes it run from your pwd. ___________________________________________________________________ Mark L. Turrin Drag me, drop me, treat me like an object! mlt@linkzone.com From owner-freebsd-questions Fri Jan 2 09:58:44 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id JAA19317 for questions-outgoing; Fri, 2 Jan 1998 09:58:44 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from argon.linkzone.com (argon.linkzone.com [204.182.59.32]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id JAA19311 for ; Fri, 2 Jan 1998 09:58:41 -0800 (PST) (envelope-from mlt@linkzone.com) Received: from localhost (mlt@localhost) by argon.linkzone.com (8.8.7/8.8.5) with SMTP id JAA05698; Fri, 2 Jan 1998 09:57:03 -0800 (PST) Date: Fri, 2 Jan 1998 09:57:03 -0800 (PST) From: Mark Turrin To: TERO Paul cc: "'freebsd-questions@FreeBSD.ORG'" Subject: Re: Dial-in and Dial-Out ISP In-Reply-To: <98Jan3.012036est.28741@firewall.atsic.gov.au> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Sat, 3 Jan 1998, TERO Paul wrote: > Hi, > > I'm wanting to set up an low-cost internet (mail-only at this stage) > node for various "bush-communities" here in the centre of Australia. > > It seems that FreeBSD is the way to go. > > However, the concept that I have is similar to Netmail and BBS nodes > that toss and scan for mail. > > I want the communities to be able to dial into this node to either > collect and/or receive email. The node will then be scheduled to dial > into a live internet node (say twice a day) and exchange my clients > email. > > This way I don't have to pay for expensive live internet connections in > an environment where there is little traffic and low line speed > available (as low as 1200 baud in some circumstances). > > Your thoughts please. Is this possible with FreeBSD? It sounds like you want to set up a UUCP link and yes BSD should be able to do this. Study up on UUCP mail exchange. Take Care, ___________________________________________________________________ Mark L. Turrin Drag me, drop me, treat me like an object! mlt@linkzone.com From owner-freebsd-questions Fri Jan 2 10:14:44 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id KAA20156 for questions-outgoing; Fri, 2 Jan 1998 10:14:44 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from cam.grad.kiev.ua (grad-UTC-28k8.ukrtel.net [195.5.25.54]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id KAA20145 for ; Fri, 2 Jan 1998 10:14:37 -0800 (PST) (envelope-from Ruslan@Shevchenko.kiev.ua) Received: from Shevchenko.kiev.ua (localhost [127.0.0.1]) by cam.grad.kiev.ua (8.8.8/8.8.5) with ESMTP id UAA05479; Thu, 1 Jan 1998 20:11:50 GMT Message-ID: <34ABF87C.428A2F18@Shevchenko.kiev.ua> Date: Thu, 01 Jan 1998 20:11:43 +0000 From: Ruslan Shevchenko X-Mailer: Mozilla 4.04 [en] (X11; I; FreeBSD 2.2.5-STABLE i386) MIME-Version: 1.0 To: "James D. Fowler" CC: questions@freebsd.org Subject: Re: man pages References: <199801021730.JAA00982@james.digitalmechanix.com> Content-Type: text/plain; charset=koi8-r Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk James D. Fowler wrote: > how do I install a single man page? > thanx > jimmy install -g bin -o bin -m 444 FILE.1.gz /usr/local/man/man1 From owner-freebsd-questions Fri Jan 2 10:49:53 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id KAA22642 for questions-outgoing; Fri, 2 Jan 1998 10:49:53 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from fireball.blast.net (root@fireball.blast.net [204.141.163.53]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id KAA22624 for ; Fri, 2 Jan 1998 10:49:34 -0800 (PST) (envelope-from turner@blast.net) Received: from flashpoint.blast.net (flashpoint.blast.net [204.141.163.62]) by fireball.blast.net (8.8.5/8.8.5) with SMTP id NAA22238 for ; Fri, 2 Jan 1998 13:31:48 -0500 (EST) Received: by flashpoint.blast.net with Microsoft Mail id <01BD1784.9AF4D360@flashpoint.blast.net>; Fri, 2 Jan 1998 13:44:53 -0500 Message-ID: <01BD1784.9AF4D360@flashpoint.blast.net> From: David Turner To: "'questions@freeBSD.ORG'" Subject: apache Date: Fri, 2 Jan 1998 13:44:52 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 8bit X-MIME-Autoconverted: from quoted-printable to 8bit by hub.freebsd.org id KAA22638 Sender: owner-freebsd-questions@freeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Hello, I am having a problem with a webserver running freebsd 2.2.2 with apache. The problem is when you request a webpage from the internet the graphics are not loading and the page does not finish loading. The server has been fine for months. The pages come up fine when I request them from a computer on our ethernet of dial into one of our POPS however if I dial in from an outside source (webspan or AOL for example) I run into this problem. Here are some examples http://www.herbalpac.com http://www.harleyofedison.com http://www.somersetsavings.com Any advice will be greatly appreciated, Thanks, Dave Turner From owner-freebsd-questions Fri Jan 2 10:52:12 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id KAA22843 for questions-outgoing; Fri, 2 Jan 1998 10:52:12 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from subcellar.mwci.net (subcellar.mwci.net [205.254.160.2]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id KAA22793 for ; Fri, 2 Jan 1998 10:51:57 -0800 (PST) (envelope-from jwalt@subcellar.mwci.net) Received: from localhost (jwalt@localhost) by subcellar.mwci.net (8.8.8/8.8.5) with SMTP id MAA20384; Fri, 2 Jan 1998 12:51:41 -0600 (CST) Date: Fri, 2 Jan 1998 12:51:36 -0600 (CST) From: "Jesse D. Walters" To: Gordon Wang cc: freebsd-questions@freebsd.org Subject: Re: netscape install? In-Reply-To: <34AC8F45.5B47@tpts5.seed.net.tw> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk make sure you have ./ns-install ---------------------------------------------------------------------------------- Jesse Walters http://users.mwci.net/~jwalt Tech Support/Customer Service Rep. jwalt@mwci.net Midwest Communications Inc. 241 Main St. Dubuque, Ia 52002 ---------------------------------------------------------------------------------- Save the whales...collect the whole set. Lottery: A tax on people who are bad at math. Always remember you are unique, just like everybody else. On Fri, 2 Jan 1998, Gordon Wang wrote: > Dear Sir > I am a FreeBSD 2.2.1 user. > I just unpacked the netscape file: > "navigator-v404-export.x86-unknown-freebsd.tar.gz" > in the directory /usr/local/netscape . > But when I typed the executable files "ns-install" or > "netscape" to install netscape, I got "command not found". > What should I do to install netscape. > Please help me > Thank you very much > > Gordon > > From owner-freebsd-questions Fri Jan 2 11:04:48 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id LAA23858 for questions-outgoing; Fri, 2 Jan 1998 11:04:48 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from picnic.mat.net (picnic.mat.net [206.246.122.117]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id LAA23840 for ; Fri, 2 Jan 1998 11:04:37 -0800 (PST) (envelope-from chuckr@glue.umd.edu) Received: from localhost (chuckr@localhost) by picnic.mat.net (8.8.8/8.8.5) with SMTP id OAA07280; Fri, 2 Jan 1998 14:03:07 -0500 (EST) Date: Fri, 2 Jan 1998 14:03:07 -0500 (EST) From: Chuck Robey X-Sender: chuckr@localhost To: Christophe Prevotaux cc: questions@FreeBSD.ORG Subject: Re: KDE under FreeBSD ? In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Fri, 2 Jan 1998, Christophe Prevotaux wrote: > Can KDE http://www.kde.org/ run under FreeBSD ? Yes, the KDE stuff is pretty well represented by various KDE ports. You know about FreeBSD ports, right? /usr/ports/x11/kde* > > > -- > =================================================================== > Christophe Prevotaux | HEXANET SARL > HEXANET System Administrator | Z.A Farman Sud > | 9 rue Roland Coffignot > Email: nighty@hexanet.fr | BP415 51689 Reims Cedex 2 FRANCE > Irc: nighty | Tel: +33 (0)3 26 79 30 05 > URL: http://www.hexanet.fr/ | Fax: +33 (0)3 26 79 30 06 > =================================================================== > ISP/IAP | WEB Developement | Intranet | Network Administration > Custom Software Development| Network Installation | Leased Lines > =================================================================== > > ----------------------------+----------------------------------------------- Chuck Robey | Interests include any kind of voice or data chuckr@glue.umd.edu | communications topic, C programming, and Unix. 213 Lakeside Drive Apt T-1 | Greenbelt, MD 20770 | I run Journey2 and picnic, both FreeBSD (301) 220-2114 | version 3.0 current -- and great FUN! ----------------------------+----------------------------------------------- From owner-freebsd-questions Fri Jan 2 11:08:15 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id LAA24219 for questions-outgoing; Fri, 2 Jan 1998 11:08:15 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from rvc1.informatik.ba-stuttgart.de (rvc1.informatik.ba-stuttgart.de [141.31.112.22]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id LAA24155; Fri, 2 Jan 1998 11:07:48 -0800 (PST) (envelope-from helbig@Informatik.BA-Stuttgart.DE) Received: (from helbig@localhost) by rvc1.informatik.ba-stuttgart.de (8.8.8/8.8.5) id UAA08478; Fri, 2 Jan 1998 20:07:37 +0100 (MET) From: Wolfgang Helbig Message-Id: <199801021907.UAA08478@rvc1.informatik.ba-stuttgart.de> Subject: Re: SOLVED: International characters in vi are displayed as hex? In-Reply-To: <199801021456.PAA07971@rvc1.informatik.ba-stuttgart.de> from Wolfgang Helbig at "Jan 2, 98 03:56:42 pm" To: helbig@BA-Stuttgart.De (Wolfgang Helbig) Date: Fri, 2 Jan 1998 20:07:36 +0100 (MET) Cc: jose@we.lc.ehu.es, freebsd-questions@FreeBSD.ORG, pol@leissner.se, helbig@FreeBSD.ORG, ache@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL30 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk > The LC_TIME files are missing for these locales: > > fi_FI.ISO_8859-1 > lt_LN.ASCII (These are LATIN, a fallback for Latin1, as pointed > lt_LN.ISO_8859-1 by Andrey Chernov) > lt_LN.ISO_8859-2 > nl_BE.ISO_8859-1 > nl_NL.ISO_8859-1 > sv_SE.ISO_8859-1 (sent to me by Peter Olsson, thank you!) > > I do not know, what language/country lt/LN belongs to. The others > are Finland, Belgium, Netherlands and Sveden. (at least that's what > I learned from /usr/share/misc/iso3166.) So only Finland, Belgium and the Netherlands are still w/o LC_TIME files. (I think Latin doesn't need one) > and thanks in advance for the others :-) > > Wolfgang > From owner-freebsd-questions Fri Jan 2 11:46:38 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id LAA27762 for questions-outgoing; Fri, 2 Jan 1998 11:46:38 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from gromit.eu.org (root@psd.7da.nl [195.108.246.100]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id LAA27729 for ; Fri, 2 Jan 1998 11:46:22 -0800 (PST) (envelope-from P.Dekkers@gromit.eu.org) Received: from localhost (localhost [127.0.0.1]) by gromit.eu.org (8.8.7/8.8.7/psd) with SMTP id UAA00431 for ; Fri, 2 Jan 1998 20:48:36 +0100 Date: Fri, 2 Jan 1998 20:48:35 +0100 (MET) From: Paul Dekkers X-Sender: paul@gromit.nev.ml.org Reply-To: Paul Dekkers To: freebsd-questions@freebsd.org Subject: NIS/YP Message-ID: X-Mood: :-) but almost |-| (sleeping) Organization: Me and organized? MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Hi I couldn't find a page in the handbook as a guide while setting up NIS: is there any documentation/howto for that? And: how do I set up a master.passwd, because when exchanging the file with other hosts it might be difficult I think: in my master.passwd e.g. are long passwords (MD5 passwords) and when using those on a Linux box as NIS client or another FreeBSD host as NIS client without MD5 it might be difficult: can I also put in non-md5's in there (and how to) or isn't this such a big problem as I expect it to be...?! (can it safely be combined with erm... crypt/des passwords? (the same huh) (how do I post-install that eventually) Thank you! Paul P.S. I run FreeBSD 2.2.1 From owner-freebsd-questions Fri Jan 2 11:55:30 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id LAA29115 for questions-outgoing; Fri, 2 Jan 1998 11:55:30 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from picnic.mat.net (picnic.mat.net [206.246.122.117]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id LAA29097 for ; Fri, 2 Jan 1998 11:55:17 -0800 (PST) (envelope-from chuckr@glue.umd.edu) Received: from localhost (chuckr@localhost) by picnic.mat.net (8.8.8/8.8.5) with SMTP id OAA07346; Fri, 2 Jan 1998 14:52:57 -0500 (EST) Date: Fri, 2 Jan 1998 14:52:56 -0500 (EST) From: Chuck Robey X-Sender: chuckr@localhost To: Michael Obara cc: freebsd-questions@FreeBSD.ORG Subject: Re: FreeBSD and DSPs In-Reply-To: <34ACD79A.3588@uriacc.uri.edu> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Fri, 2 Jan 1998, Michael Obara wrote: > I'm interested in using the UNIX 'ls' command on a UNIX-formatted tape > drive mounted on a Texas Instruments C40 digital signal processing > chip. To do this, I need the C code for the 'ls' function. Do you make > any or your source code available? If not, do you know anywhere that I > might be able to find code which will be able to list all files in a > UNIX directory? If not, do you know where I can get info about the > method by which UNIX stores file information? I know that this not what > you do, but it is for a project and I am stuck. This sounds a little confusing. I first read that as meaning using the unix mount command, but that mounts a volume on a directory mount point of another mounted volume, and the DSP ship you're talking about isn't even an operating system, much less a logical volume. Must be wrong there. OK, did you mean mount as in physical mounting? That chip isn't that large... Nah, you couldn't have meant that! Well, I'll answer what does make sense. You asked about the source code ... yeah the source code for all of FreeBSD is freely and openly available, on any of the many FreeBSD mirrors of wcarchive.cdrom.com. On wcarchive, you'd look into /pub/FreeBSD. I get the idea that the code there isn't going to do what you think it will, but maybe that's a start. I don't understand the rest of it well enough, I guess. > > Thank you, > Michael Obara > > ----------------------------+----------------------------------------------- Chuck Robey | Interests include any kind of voice or data chuckr@glue.umd.edu | communications topic, C programming, and Unix. 213 Lakeside Drive Apt T-1 | Greenbelt, MD 20770 | I run Journey2 and picnic, both FreeBSD (301) 220-2114 | version 3.0 current -- and great FUN! ----------------------------+----------------------------------------------- From owner-freebsd-questions Fri Jan 2 11:58:51 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id LAA29482 for questions-outgoing; Fri, 2 Jan 1998 11:58:51 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from gromit.eu.org (root@psd.7da.nl [195.108.246.100]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id LAA29453 for ; Fri, 2 Jan 1998 11:58:30 -0800 (PST) (envelope-from P.Dekkers@gromit.eu.org) Received: from localhost (localhost [127.0.0.1]) by gromit.eu.org (8.8.7/8.8.7/psd) with SMTP id VAA00486 for ; Fri, 2 Jan 1998 21:00:46 +0100 Date: Fri, 2 Jan 1998 21:00:46 +0100 (MET) From: Paul Dekkers X-Sender: paul@gromit.nev.ml.org Reply-To: Paul Dekkers To: freebsd-questions@freebsd.org Subject: update or not? Message-ID: X-Mood: :-) but almost |-| (sleeping) Organization: Me and organized? MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Hi I currently run FreeBSD 2.2.1 on a mashine that's used as a multi-user system and I'm planning to setup a new mashine that doesn't let users log in but let it play web-server or mail-server or smth like that... I'm planning to put FreeBSD 2.2.1 on that server, but is that a good idea? I'm just doing it because I have that version on CD and I don't have newer versions... (although I can buy them) - Is the new version really that changed (security holes or in any other aspect (which? speed?) that I'd immediately buy the new version? So my main question: should I upgrade or not, or install a new version or not, or even both? :-) Are there many major bugs, and if so, can I find a list on the net of security-holes in the version I'm currently using? (maybe I'm taking a big risk because it's a multi-user system?!) If I'd upgrade the multi-user system, can I do that without any pain? What can I do to let it go nice and so on...?! Thank you, (On linux I never doubt upgrading because I know there are many security holes, but is that too on FreeBSD...) Paul P.S. Or is it worth setting up for my home-system: is the awe 32 pnp supported? (including midi-player and so on?) (in that case it would be of interest ;-)) From owner-freebsd-questions Fri Jan 2 12:03:14 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id MAA29931 for questions-outgoing; Fri, 2 Jan 1998 12:03:14 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from gromit.eu.org (root@psd.7da.nl [195.108.246.100]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id MAA29923 for ; Fri, 2 Jan 1998 12:03:05 -0800 (PST) (envelope-from P.Dekkers@gromit.eu.org) Received: from localhost (localhost [127.0.0.1]) by gromit.eu.org (8.8.7/8.8.7/psd) with SMTP id VAA00513 for ; Fri, 2 Jan 1998 21:05:18 +0100 Date: Fri, 2 Jan 1998 21:05:17 +0100 (MET) From: Paul Dekkers X-Sender: paul@gromit.nev.ml.org Reply-To: Paul Dekkers To: freebsd-questions@freebsd.org Subject: Callback program and IPX routing? Message-ID: X-Mood: :-) but almost |-| (sleeping) Organization: Me and organized? MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Hi Is there any program available under FreeBSD that does callback (because of security), and gives you PPP access with IPX so I can access Novell servers remotely? Is any IPX routing possible? (Is it that good as under Linux or even better or worse or didn't anyone ever test it?) (Don't need access to Novell servers however I'd like to print under FreeBSD to a novell-printer, but that's not needed now) Thanks Paul From owner-freebsd-questions Fri Jan 2 12:10:41 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id MAA00623 for questions-outgoing; Fri, 2 Jan 1998 12:10:41 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from picnic.mat.net (picnic.mat.net [206.246.122.117]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id MAA00616 for ; Fri, 2 Jan 1998 12:10:35 -0800 (PST) (envelope-from chuckr@glue.umd.edu) Received: from localhost (chuckr@localhost) by picnic.mat.net (8.8.8/8.8.5) with SMTP id PAA07385; Fri, 2 Jan 1998 15:09:21 -0500 (EST) Date: Fri, 2 Jan 1998 15:09:21 -0500 (EST) From: Chuck Robey X-Sender: chuckr@localhost To: "James D. Fowler" cc: questions@FreeBSD.ORG Subject: Re: man pages In-Reply-To: <199801021730.JAA00982@james.digitalmechanix.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Fri, 2 Jan 1998, James D. Fowler wrote: > how do I install a single man page? If you take a look at /etc/manpath.config, you'll see the list of directories your system knows to search thru. Pick one. Underneath each will be at least one, and possibly 2 sets of subdirectories. One will have the names man1, man2, etc, and this is where troff (mdoc) formatted man pages go, in gzip compressed form. The other set (which you might not have) is the cat1, cat2, etc set, where preformatted (ready for display) man pages go. If you don't have the cat directories, your system can't cache formatted man pages for redisplay. This saves you some disk space, but costs extra formatting time for man pages you access a lot. /usr/share/man is the directory for the system man pages. I would not recommend adding locally generated man pages there, because when you finally upgrade your installation, you're going to be reinstalling that directory, and you'll have to separate out the system man pages from your locally installed ones, so that the locally installed ones don't get wiped out in the upgrade. > thanx > jimmy > > ----------------------------+----------------------------------------------- Chuck Robey | Interests include any kind of voice or data chuckr@glue.umd.edu | communications topic, C programming, and Unix. 213 Lakeside Drive Apt T-1 | Greenbelt, MD 20770 | I run Journey2 and picnic, both FreeBSD (301) 220-2114 | version 3.0 current -- and great FUN! ----------------------------+----------------------------------------------- From owner-freebsd-questions Sat Jan 3 04:32:27 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id EAA08230 for questions-outgoing; Sat, 3 Jan 1998 04:32:27 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from barney.webace.com.au ([203.25.160.154]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id EAA08224 for ; Sat, 3 Jan 1998 04:32:18 -0800 (PST) (envelope-from jasonm@barney.webace.com.au) Received: from localhost (jasonm@localhost) by barney.webace.com.au (8.8.5/8.8.5) with SMTP id UAA15713 for ; Sat, 3 Jan 1998 20:43:29 +0800 (WST) Date: Sat, 3 Jan 1998 20:43:29 +0800 (WST) From: Jason McKay To: questions@freebsd.org Subject: PPP and Routing Problems Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I'm having a routing problem with ppp, users can successfully connect with ppp and access our other machines on the LAN ... But they can't access the outside world. Gateway is set to YES in rc.conf, and enable proxy is in the ppp.conf file. Shell users can access the outside world without any problems. It's only restricted to ppp users. I would be greatful for any help. Thank you, Jason McKay. From owner-freebsd-questions Sat Jan 3 05:19:39 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id FAA10372 for questions-outgoing; Sat, 3 Jan 1998 05:19:39 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from al.imforei.apana.org.au (pjchilds@al.imforei.apana.org.au [202.12.89.41]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id FAA10359 for ; Sat, 3 Jan 1998 05:19:31 -0800 (PST) (envelope-from pjchilds@al.imforei.apana.org.au) Received: (from pjchilds@localhost) by al.imforei.apana.org.au (beBop) id XAA04332; Sat, 3 Jan 1998 23:49:26 +1030 (CST) Date: Sat, 3 Jan 1998 23:49:26 +1030 (CST) From: Peter Childs Message-Id: <199801031319.XAA04332@al.imforei.apana.org.au> To: jasonm@barney.webace.com.au (Jason McKay), freebsd-questions@freebsd.org Subject: Re: PPP and Routing Problems User-Agent: tin/pre-1.4-971224 (UNIX) (FreeBSD/2.2-STABLE (i386)) Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk In article you wrote: > I'm having a routing problem with ppp, users can successfully > connect with ppp and access our other machines on the LAN ... But they > can't access the outside world. Gateway is set to YES in rc.conf, and > enable proxy is in the ppp.conf file. Shell users can access the outside > world without any problems. It's only restricted to ppp users. Is telstra routing the addresses that you allocate to your ppp clients to you? Are they on the same class C as yourself? Could you elaborate on your network setup a little more? Ta. Peter -- Peter Childs - finger pjchilds@al.imforei.apana.org.au for PGP public key We are FreeBSD, resistance is related to current and voltage... From owner-freebsd-questions Sat Jan 3 05:36:05 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id FAA11136 for questions-outgoing; Sat, 3 Jan 1998 05:36:05 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from barney.webace.com.au ([203.25.160.154]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id FAA11104 for ; Sat, 3 Jan 1998 05:35:59 -0800 (PST) (envelope-from jasonm@barney.webace.com.au) Received: from localhost (jasonm@localhost) by barney.webace.com.au (8.8.5/8.8.5) with SMTP id VAA15813; Sat, 3 Jan 1998 21:47:03 +0800 (WST) Date: Sat, 3 Jan 1998 21:47:03 +0800 (WST) From: Jason McKay To: Peter Childs cc: freebsd-questions@freebsd.org Subject: Re: PPP and Routing Problems In-Reply-To: <199801031319.XAA04332@al.imforei.apana.org.au> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Sorry, No we are doing the routing, we have a C class address of 203.25.160.x .. All our machines attached to our LAN are using addresses from that pool. PPP clients are also given an address from our pool. Thank you, Jason McKay. On Sat, 3 Jan 1998, Peter Childs wrote: > In article you wrote: > > I'm having a routing problem with ppp, users can successfully > > connect with ppp and access our other machines on the LAN ... But they > > can't access the outside world. Gateway is set to YES in rc.conf, and > > enable proxy is in the ppp.conf file. Shell users can access the outside > > world without any problems. It's only restricted to ppp users. > > Is telstra routing the addresses that you allocate to your ppp clients to > you? Are they on the same class C as yourself? Could you elaborate > on your network setup a little more? > > Ta. > > Peter > > -- > Peter Childs - finger pjchilds@al.imforei.apana.org.au for PGP public key > > We are FreeBSD, resistance is related to current and voltage... > > From owner-freebsd-questions Sat Jan 3 05:40:45 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id FAA11459 for questions-outgoing; Sat, 3 Jan 1998 05:40:45 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from emerald.accessv.com (emerald.accessv.com [206.221.248.8]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id FAA11454 for ; Sat, 3 Jan 1998 05:40:43 -0800 (PST) (envelope-from grobin@accessv.com) Received: from accessv.com (port044-86.accessv.com [209.50.86.44]) by emerald.accessv.com (8.8.5/8.8.5) with ESMTP id IAA03449; Sat, 3 Jan 1998 08:39:10 -0500 Message-ID: <34AE3FA0.FD6C9A5E@accessv.com> Date: Sat, 03 Jan 1998 08:39:44 -0500 From: Geoffrey Robinson Reply-To: grobin@accessv.com X-Mailer: Mozilla 4.03 [en] (Win95; U) MIME-Version: 1.0 To: Rudy Gireyev CC: questions@freebsd.org Subject: Re: Can't Access Apache Manual Files References: <19980103082605.5208.rocketmail@send1a.yahoomail.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Rudy Gireyev wrote: > > ---Geoffrey Robinson wrote: > > > > Rudy Gireyev wrote: > > > > > > ---Geoffrey Robinson wrote: > > > > > > > > I added the path /usr/apache/man to MANPATH in my .login file > but man > > > > > > Make sure it made it into the path when you are running it. > > > > How? > > echo $MANPATH :-) Okay, it's in the path. Actually I think the problem may be that the Apache manual files just aren't there. In /usr/apache/man I get the listing cat1 cat9 man4 cat2 catl man5 cat3 catn man6 cat4 de_DE.ISO_8859-1 man7 cat5 ja_JP.EUC man8 cat6 man1 man9 cat7 man2 manl cat8 man3 mann This is the same listing I get in /usr/local/man but when I do #ls -Rl /usr/apache/man >list and look at list in vi I discover that there are no files in the /usr/apache/man tree, only a bunch of empty directories and subdirectories. I looked in the apache build directories for the help files but I couldn't find anything. Do you know where I can get them and where to copy them to? Is it possible that they where accidentally left out of the apache-current port? - Geoff From owner-freebsd-questions Sat Jan 3 05:46:00 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id FAA11705 for questions-outgoing; Sat, 3 Jan 1998 05:46:00 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from odyssey.apana.org.au (odyssey.apana.org.au [203.11.114.1]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id FAA11698 for ; Sat, 3 Jan 1998 05:45:53 -0800 (PST) (envelope-from dean@odyssey.apana.org.au) Received: from localhost (dean@localhost) by odyssey.apana.org.au (8.8.7/8.8.7) with SMTP id VAA04542; Sat, 3 Jan 1998 21:44:00 +0800 (WST) Date: Sat, 3 Jan 1998 21:44:00 +0800 (WST) From: Dean Hollister To: Peter Childs cc: Jason McKay , freebsd-questions@FreeBSD.ORG Subject: Re: PPP and Routing Problems In-Reply-To: <199801031319.XAA04332@al.imforei.apana.org.au> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Sat, 3 Jan 1998, Peter Childs wrote: > Is telstra routing the addresses that you allocate to your ppp clients to > you? Are they on the same class C as yourself? Could you elaborate > on your network setup a little more? >From my knowledge of Jason's setup, he's using a router. We have initial problems with out router, because our upstream provider wasn't routing IP addresses for the modems. Regards, d. +-------------------------------------------------------+ | Dean Hollister, | dean@odyssey.apana.org.au | | Perth, Western Australia. | deanh@iinet.net.au | +-------------------------------------------------------+ From owner-freebsd-questions Sat Jan 3 06:12:17 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id GAA12954 for questions-outgoing; Sat, 3 Jan 1998 06:12:17 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from phoenix.its.rpi.edu (dec@phoenix.its.rpi.edu [128.113.161.45]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id GAA12949 for ; Sat, 3 Jan 1998 06:12:12 -0800 (PST) (envelope-from dec@phoenix.its.rpi.edu) Received: from localhost (dec@localhost) by phoenix.its.rpi.edu (8.8.8/8.8.7) with SMTP id JAA06608 for ; Sat, 3 Jan 1998 09:12:11 -0500 (EST) (envelope-from dec@phoenix.its.rpi.edu) Date: Sat, 3 Jan 1998 09:12:11 -0500 (EST) From: "David E. Cross" To: freebsd-questions@freebsd.org Subject: release images question? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk what is the make(1) command to build the release images (boot.flp, fixit.flp, bin.aa, bin.ab, ..., etc)? -- David Cross UNIX System Administrator GE CRD From owner-freebsd-questions Sat Jan 3 07:00:02 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id HAA14483 for questions-outgoing; Sat, 3 Jan 1998 07:00:02 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from BIGFUN.vwcom.com (BIGFUN.vwcom.com [151.197.101.21]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id GAA14432 for ; Sat, 3 Jan 1998 06:59:57 -0800 (PST) (envelope-from bmc@WillsCreek.COM) Received: from WillsCreek.COM (gw.willscreek.com [151.197.101.46]) by BIGFUN.vwcom.com (8.8.6/8.8.6) with ESMTP id JAA07639; Sat, 3 Jan 1998 09:54:47 -0500 (EST) Received: from current.willscreek.com (current.willscreek.com [172.16.87.1]) by WillsCreek.COM (8.8.8/8.8.5) with ESMTP id JAA12428; Sat, 3 Jan 1998 09:59:44 -0500 (EST) Received: (from bmc@localhost) by current.willscreek.com (8.8.8/8.8.5) id JAA19770; Sat, 3 Jan 1998 09:59:42 -0500 (EST) Date: Sat, 3 Jan 1998 09:59:42 -0500 (EST) Message-Id: <199801031459.JAA19770@current.willscreek.com> From: Brian Clapper MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: grobin@accessv.com Cc: Rudy Gireyev , questions@freebsd.org Subject: Re: Can't Access Apache Manual Files In-Reply-To: <34AE3FA0.FD6C9A5E@accessv.com> References: <19980103082605.5208.rocketmail@send1a.yahoomail.com> <34AE3FA0.FD6C9A5E@accessv.com> X-Mailer: VM 6.23 under Emacs 19.34.1 Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk On 3 January, 1998, at 08:39 (-0500) Geoffrey Robinson wrote: > Okay, it's in the path. > Actually I think the problem may be that the Apache manual files just > aren't there. In /usr/apache/man I get the listing > > cat1 cat9 man4 > cat2 catl man5 > cat3 catn man6 > cat4 de_DE.ISO_8859-1 man7 > cat5 ja_JP.EUC man8 > cat6 man1 man9 > cat7 man2 manl > cat8 man3 mann > > This is the same listing I get in /usr/local/man but when I do > #ls -Rl /usr/apache/man >list > and look at list in vi I discover that there are no files in the > /usr/apache/man tree, only a bunch of empty directories and > subdirectories. I looked in the apache build directories for the help > files but I couldn't find anything. Do you know where I can get them and > where to copy them to? Is it possible that they where accidentally left > out of the apache-current port? To my knowledge, there *are* no man pages for Apache, and never have been; all the docs are HTML. I have the full source distribution for Apache 1.3b2 (only one beta release behind the current one of 1.3b3). There's not a single man page in the distribution. Furthermore, the prebuilt Apache FreeBSD packages don't install any docs (HTML or otherwise)--at least, not the ones on my 2.2.5-RELEASE CD-ROM. Likewise, the package list (PLIST) files for the ports on that CD-ROM don't list any docs, and the Makefile doesn't install them. I recommend that you extract one of the ports (say, `apache-current' or `apache'), then `cd' to directory `work/apache*/htdocs/manual'. In that directory, you'll find the complete HTML documentation for Apache--essentially the same docs that you find on the Apache home page, `http://www.apache.org'. ----- Brian Clapper, bmc@WillsCreek.COM, http://WWW.WillsCreek.COM/ Be regular and orderly in your life so that you may be violent and original in your work. -- Gustave Flaubert From owner-freebsd-questions Sat Jan 3 07:18:23 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id HAA15115 for questions-outgoing; Sat, 3 Jan 1998 07:18:23 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from emu.sourcee.com (emu.sourcee.com [199.201.159.173]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id HAA15108 for ; Sat, 3 Jan 1998 07:18:17 -0800 (PST) (envelope-from nrice@emu.sourcee.com) Received: (from nrice@localhost) by emu.sourcee.com (8.8.8/8.8.3) id KAA01005; Sat, 3 Jan 1998 10:18:04 -0500 (EST) Message-ID: <19980103101803.44304@emu.sourcee.com> Date: Sat, 3 Jan 1998 10:18:03 -0500 From: Norman C Rice To: Jason McKay Cc: freebsd-questions@FreeBSD.ORG Subject: Re: PPP and Routing Problems References: <199801031319.XAA04332@al.imforei.apana.org.au> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.88 In-Reply-To: ; from Jason McKay on Sat, Jan 03, 1998 at 09:47:03PM +0800 Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Sat, Jan 03, 1998 at 09:47:03PM +0800, Jason McKay wrote: > Sorry, > > No we are doing the routing, we have a C class address of 203.25.160.x .. > All our machines attached to our LAN are using addresses from that pool. > PPP clients are also given an address from our pool. Are you using packet filtering with user-mode ppp (dfilter)? Are the ppp clients on the same subnet as the local users that work? Does `arp -a' report the ppp client's permanent published proxy? Does `sysctl net.inet.ip.forwarding' return `net.inet.ip.forwarding: 1'? Is IP_FIREWALL enabled in your kernel? Are you running routed? What version (release date) of user-mode ppp are you running? Are you sure the FreeBSD box isn't forwarding the packets? Perhaps a ppp client can run traceroute (or TRACERT) to your router to see whether the packets are forwarded. Can you `tcpdump' the ppp client during this activity? How about publishing the following? netstat -rn arp -a /etc/ppp/ppp.conf (with password stuff changed) a simple network drawing (ppp client, FreeBSD box, and router) showing the IP addresses and netmasks > > Thank you, > Jason McKay. > > On Sat, 3 Jan 1998, Peter Childs wrote: > > > In article you wrote: > > > I'm having a routing problem with ppp, users can successfully > > > connect with ppp and access our other machines on the LAN ... But they > > > can't access the outside world. Gateway is set to YES in rc.conf, and > > > enable proxy is in the ppp.conf file. Shell users can access the outside > > > world without any problems. It's only restricted to ppp users. > > > > Is telstra routing the addresses that you allocate to your ppp clients to > > you? Are they on the same class C as yourself? Could you elaborate > > on your network setup a little more? > > > > Ta. > > > > Peter > > > > -- > > Peter Childs - finger pjchilds@al.imforei.apana.org.au for PGP public key > > > > We are FreeBSD, resistance is related to current and voltage... > > > > -- Regards, Norman C. Rice, Jr. From owner-freebsd-questions Sat Jan 3 07:20:25 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id HAA15320 for questions-outgoing; Sat, 3 Jan 1998 07:20:25 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from mail1.sirius.com (mail1.sirius.com [205.134.253.131]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id HAA15312 for ; Sat, 3 Jan 1998 07:20:18 -0800 (PST) (envelope-from Shepard@cris.com) Received: from cris.com (ppp-asx201--037.sirius.net [205.134.247.37]) by mail1.sirius.com (8.8.7/Sirius-8.8.7-97.08.12) with ESMTP id HAA15560 for ; Sat, 3 Jan 1998 07:19:37 -0800 (PST) Message-ID: <34AE5796.CB72F052@cris.com> Date: Sat, 03 Jan 1998 07:21:58 -0800 From: Duck Dogers X-Mailer: Mozilla 4.04 [en] (Win95; I) MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: File Allocation Tables Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Will Free BSD work on a FAT32 system? If not naturally can the image program written for unix work for Free BSD as well? Thank you for any reply. -N.S. From owner-freebsd-questions Sat Jan 3 07:36:36 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id HAA16135 for questions-outgoing; Sat, 3 Jan 1998 07:36:36 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from cerberus.partsnow.com (gatekeeper.partsnow.com [207.155.26.98]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id HAA16130 for ; Sat, 3 Jan 1998 07:36:33 -0800 (PST) (envelope-from don@partsnow.com) Received: (from bin@localhost) by cerberus.partsnow.com (8.8.5/8.6.9) id HAA28488; Sat, 3 Jan 1998 07:35:03 -0800 (PST) X-Authentication-Warning: cerberus.partsnow.com: bin set sender to using -f Received: from wildeweb(192.168.100.10) by cerberus.partsnow.com via smap (V2.0) id xma028479; Sat, 3 Jan 98 07:34:50 -0800 Message-ID: <34AE5AAF.2986EC1C@partsnow.com> Date: Sat, 03 Jan 1998 07:35:11 -0800 From: Don Wilde Reply-To: don@partsnow.com Organization: Soligen, Incorporated X-Mailer: Mozilla 4.04 [en] (X11; I; FreeBSD 2.2.5-RELEASE i386) MIME-Version: 1.0 To: Charles Reese CC: questions@freebsd.org Subject: Re: Network problem with Novell 4.11 References: <1.5.4.32.19980103003950.006eec10@chem.duke.edu> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk > Is there something else that must be configured for FreeBSD to run on a > Novell lan? > Nothing except to make the Novell clients talk Ethernet-II frame type. I set up E-II and 802.3 as the two frame types in Novell's STARTNET.BAT. Novell's default in V4.1 is 802.2, but the novell-server-emulation software (SoftNet) we use on the HPUX machines will only talk 802.3. Works fine for me. If you want to share disks, load SAMBA on the FreeBSD server. We use FreeBSD for all web-related servers, HPUX and NT for workstations, and Win3.1 and 95 for PC clients. -- oooOOO O O O o * * * * * * o ___ _________ _________ ________ _________ _________ ___==_ V_=_=_DW ===--- Don Wilde [don@PartsNow.com] [http://www.PartsNow.com ] /oo0000oo-oo--oo-ooo---ooo-ooo---ooo-ooo--ooo-ooo---ooo-ooo---ooo-oo--oo  From owner-freebsd-questions Sat Jan 3 07:51:40 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id HAA16674 for questions-outgoing; Sat, 3 Jan 1998 07:51:40 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from awfulhak.demon.co.uk (awfulhak.demon.co.uk [158.152.17.1]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id HAA16665 for ; Sat, 3 Jan 1998 07:51:33 -0800 (PST) (envelope-from brian@awfulhak.org) Received: from gate.lan.awfulhak.org (localhost [127.0.0.1]) by awfulhak.demon.co.uk (8.8.7/8.8.7) with ESMTP id OAA14420; Sat, 3 Jan 1998 14:53:57 GMT (envelope-from brian@gate.lan.awfulhak.org) Message-Id: <199801031453.OAA14420@awfulhak.demon.co.uk> X-Mailer: exmh version 2.0.1 12/23/97 To: Jason McKay cc: questions@freebsd.org Subject: Re: PPP and Routing Problems In-reply-to: Your message of "Sat, 03 Jan 1998 20:43:29 +0800." Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Sat, 03 Jan 1998 14:53:54 +0000 From: Brian Somers Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk > I'm having a routing problem with ppp, users can successfully > connect with ppp and access our other machines on the LAN ... But they > can't access the outside world. Gateway is set to YES in rc.conf, and > enable proxy is in the ppp.conf file. Shell users can access the outside > world without any problems. It's only restricted to ppp users. > > I would be greatful for any help. Are the users making your ppp server their default gateway ? What does traceroute say ? > Thank you, > Jason McKay. > -- Brian , , Don't _EVER_ lose your sense of humour.... From owner-freebsd-questions Sat Jan 3 07:54:04 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id HAA16860 for questions-outgoing; Sat, 3 Jan 1998 07:54:04 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from maila.telia.com (root@maila.telia.com [194.236.189.1]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id HAA16851 for ; Sat, 3 Jan 1998 07:53:58 -0800 (PST) (envelope-from girgen@partitur.se) Received: from d1o62.telia.com (root@d1o62.telia.com [195.198.198.241]) by maila.telia.com (8.8.8/8.8.5) with ESMTP id QAA11658; Sat, 3 Jan 1998 16:53:42 +0100 (MET) Received: from partitur.se (t6o62p6.telia.com [195.198.199.66]) by d1o62.telia.com (8.8.5/8.8.5) with ESMTP id QAA28710; Sat, 3 Jan 1998 16:53:40 +0100 (MET) Message-ID: <34AE5EEA.58E692E8@partitur.se> Date: Sat, 03 Jan 1998 16:53:14 +0100 From: Palle Girgensohn Organization: Partitur X-Mailer: Mozilla 4.04 [en] (X11; I; FreeBSD 2.2.5-STABLE i386) MIME-Version: 1.0 To: Jason Hudgins CC: questions@FreeBSD.ORG Subject: Re: Good backup hardware???? References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Hello Jason, I'm in a similar situation. What happens for you is that the tape has reached the end (my guess; I get write errors when I reach end-of-tapes), and is trying to tell you this on the tty; "fopen on /dev/tty" means that it cannot talk to a console, probably because you're running it from cron, or detached the dump process from the tty. AFAIK, you can't run dump from cron, at least not directly. (I'd like to hear from you folks! How do you make automated dumps?) Dump needs user interaction when an error or end-of-tape occurs, or it will get suspended or fail. Hence, it must be started from a console. I guess one could make a script that runs on the console and sleeps during the day...? Or maybe let cron attach the dump command to a console (better, but how,and is it possible?). What does your dump command look like? If your tape can swallow no more than 2GB, you've reached the end-of-tape. Using the B option, yuo can tell dump about the tape lenght, and get "tape-end" instead of "write-error". If you expect hardware compression, are you sure it is switched on? Probably not? Hope this helps Palle Jason Hudgins wrote: > > I have a need for solid automated backups on my companies webserver, > so far I've tried both an HP DAT drive and Seagate DAT. The HP > didn't live to long, and the Seagates performance has been > laughable at best. I've only gotten a successful backup about 10% of > the time. I need a system that can backup about 5 gigs of data daily. > > Here are the tails my last two logged attempts.. > > DUMP: 89.11% done, finished in 0:09 > DUMP: write error 1964580 blocks into volume 1 > DUMP: fopen on /dev/tty fails: Device not configured > DUMP: The ENTIRE dump is aborted. > > DUMP: estimated 2117660 tape blocks. > DUMP: write error 20 blocks into volume 1 > DUMP: fopen on /dev/tty fails: Device not configured > DUMP: The ENTIRE dump is aborted. > > Can anyone offer any suggestions? > > Jason Hudgins From owner-freebsd-questions Sat Jan 3 08:15:32 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id IAA17841 for questions-outgoing; Sat, 3 Jan 1998 08:15:32 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from super.zippo.com (perry.zippo.com [207.211.168.33]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id IAA17836 for ; Sat, 3 Jan 1998 08:15:30 -0800 (PST) (envelope-from reyesf@super.zippo.com) Received: (from reyesf@localhost) by super.zippo.com (8.8.6/8.8.7) id IAA16264; Sat, 3 Jan 1998 08:15:23 -0800 (PST) Message-Id: <199801031615.IAA16264@super.zippo.com> From: "Francisco Reyes" To: "Wolfram Schneider" Cc: "FreeBSD questions" Date: Sat, 03 Jan 98 11:13:16 -0400 Reply-To: "Francisco Reyes" Priority: Normal X-Mailer: PMMail 1.95a For OS/2 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Subject: Empty locale directories. Normal? Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk On 02 Jan 1998 13:23:38 +0100, Wolfram Schneider wrote: While trying to see why netscape is still not displaying spanish characters I noticed all my locale directories are empty. Is this normal? The directories are in /usr/share, /usr/share/local (and a couple others I don't recall). If it is not normal how do I get the local files? Tried /stand/sysinstall and did not see anything for this purpose. Also when Netscape starts it says "locale en_US.ISO_8859-1 not supported by Xlib trying 'C'". Is this because the locale files are missing? >Set the TERM variable to `cons25l1' in your ~/.profile >or in /etc/ttys. > >"Francisco Reyes" writes: >> What settings do I need to change to be able to see Spanish >> characters (ie spanish n and letters with accents). >> >> I tried changing the "system console" to ISO88591 From owner-freebsd-questions Sat Jan 3 08:56:15 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id IAA19741 for questions-outgoing; Sat, 3 Jan 1998 08:56:15 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from emu.sourcee.com (emu.sourcee.com [199.201.159.173]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id IAA19736 for ; Sat, 3 Jan 1998 08:56:11 -0800 (PST) (envelope-from nrice@emu.sourcee.com) Received: (from nrice@localhost) by emu.sourcee.com (8.8.8/8.8.3) id LAA00336; Sat, 3 Jan 1998 11:56:04 -0500 (EST) Message-ID: <19980103115603.07099@emu.sourcee.com> Date: Sat, 3 Jan 1998 11:56:03 -0500 From: Norman C Rice To: freebsd-questions@FreeBSD.ORG Subject: UPSD toggle wraparound and negative response Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.88 Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk I am running the experimental upsd port on several FreeBSD 2.2.5-STABLE systems with APC Smart-UPS 1000s. Every 10 minutes /var/log/messages receives entries similar to Jan 3 11:17:38 emu upsd[231]: apc_tune: toggle wraparound Jan 3 11:17:39 emu upsd[231]: apc_tune: toggle wraparound Jan 3 11:17:39 emu upsd[231]: apc_tune: negative response: NO Jan 3 11:17:40 emu upsd[231]: apc_tune: toggle wraparound The `apc_tune: negative response: NO' message also appears on the console. I believe the frequency of these messages is due to the every 600 { tune "high-transfer-point" 264 tune "low-transfer-point" 196 tune "line-alarm" "0" tune "line-sensitivity" "L" tune "low-batteries-duration" 2 tune "nominal-voltage" 220 tune "shutdown-delay" 20 tune "wakeup-batteries-capacity" 25 tune "wakeup-delay" 0 # tune "batteries-replaced" "01/01/77" # tune "label" "WildWind" } section in /etc/upsd.conf. My experiments with removal of line power indicate that the shutdown process and line restoration work properly. For the time being, I have commented out these messages in apc.c. What do these messages mean? Do they indicate a problem that needs fixing for proper operation? Are there other programs that work with the APC Smart-UPS? -- Regards, Norman C. Rice, Jr. From owner-freebsd-questions Sat Jan 3 08:58:56 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id IAA19883 for questions-outgoing; Sat, 3 Jan 1998 08:58:56 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from picnic.mat.net (picnic.mat.net [206.246.122.117]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id IAA19878 for ; Sat, 3 Jan 1998 08:58:53 -0800 (PST) (envelope-from chuckr@glue.umd.edu) Received: from localhost (chuckr@localhost) by picnic.mat.net (8.8.8/8.8.5) with SMTP id LAA07607; Sat, 3 Jan 1998 11:57:31 -0500 (EST) Date: Sat, 3 Jan 1998 11:57:30 -0500 (EST) From: Chuck Robey X-Sender: chuckr@localhost To: Duck Dogers cc: freebsd-questions@FreeBSD.ORG Subject: Re: File Allocation Tables In-Reply-To: <34AE5796.CB72F052@cris.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Sat, 3 Jan 1998, Duck Dogers wrote: > Will Free BSD work on a FAT32 system? If not naturally can the > image program written for unix work for Free BSD as well? Thank you for > any reply. -N.S. Understand that FreeBSD is an operating system, in a class of programs like Windows NT or OS/2. It does it's own formatting of partitions. It doesn't operate under some other OS ... as an example, does Windows 95 operate under OS/2? No, they install separately, in their own partitions, as does FreeBSD. The formatting FreeBSD does on it's partitions, BTW, doesn't even remotely resemble FAT32. Maybe you were asking if FreeBSD can access data on your FAT32 partitions? It has always been able to access the FAT16 partitions, but until very recently, it couldn't access the FAT32 ones. Some recent work in FreeBSD-current has gotten some level of compatibility with FAT32 partitions (I don't know exactly how much) but that code is very new, and certainly not available on any release version of FreeBSD yet. I hope that answered your question ... > > > ----------------------------+----------------------------------------------- Chuck Robey | Interests include any kind of voice or data chuckr@glue.umd.edu | communications topic, C programming, and Unix. 213 Lakeside Drive Apt T-1 | Greenbelt, MD 20770 | I run Journey2 and picnic, both FreeBSD (301) 220-2114 | version 3.0 current -- and great FUN! ----------------------------+----------------------------------------------- From owner-freebsd-questions Sat Jan 3 08:59:47 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id IAA19956 for questions-outgoing; Sat, 3 Jan 1998 08:59:47 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from infowest.com (infowest.com [204.17.177.10]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id IAA19944 for ; Sat, 3 Jan 1998 08:59:44 -0800 (PST) (envelope-from adg@infowest.com) Received: (from root@localhost) by infowest.com (8.8.5/8.8.5) id JAA03564 for questions@freebsd.org; Sat, 3 Jan 1998 09:59:42 -0700 (MST) Date: Sat, 3 Jan 1998 09:59:42 -0700 (MST) From: "Aaron D. Gifford" Message-Id: <199801031659.JAA03564@infowest.com> To: questions@freebsd.org Subject: Re: KDE under FreeBSD ? Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Isn't moc part of the Qt distribution that KDE requires? When I installed Qt from source (I didn't use the port), the default location was /usr/local/qt/bin/moc. Aaron out. From owner-freebsd-questions Sat Jan 3 08:59:59 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id IAA20006 for questions-outgoing; Sat, 3 Jan 1998 08:59:59 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from mailc.telia.com (root@mailc.telia.com [194.22.190.4]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id IAA19995 for ; Sat, 3 Jan 1998 08:59:55 -0800 (PST) (envelope-from girgen@partitur.se) Received: from d1o62.telia.com (root@d1o62.telia.com [195.198.198.241]) by mailc.telia.com (8.8.8/8.8.5) with ESMTP id RAA20659; Sat, 3 Jan 1998 17:59:48 +0100 (MET) Received: from partitur.se (t3o62p3.telia.com [195.198.198.123]) by d1o62.telia.com (8.8.5/8.8.5) with ESMTP id RAA15255; Sat, 3 Jan 1998 17:58:31 +0100 (MET) Message-ID: <34AE6E1D.2A533F5F@partitur.se> Date: Sat, 03 Jan 1998 17:58:05 +0100 From: Palle Girgensohn Organization: Partitur X-Mailer: Mozilla 4.04 [en] (X11; I; FreeBSD 2.2.5-STABLE i386) MIME-Version: 1.0 To: Francisco Reyes CC: Wolfram Schneider , FreeBSD questions Subject: Re: Empty locale directories. Normal? References: <199801031615.IAA16264@super.zippo.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Francisco Reyes wrote: > > On 02 Jan 1998 13:23:38 +0100, Wolfram Schneider wrote: > > While trying to see why netscape is still not displaying spanish > characters I noticed all my locale directories are empty. Is this > normal? The directories are in /usr/share, /usr/share/local (and a Not normal. Here's my /usr/share/locale lrwxrwxrwx 1 root bin 11 Nov 26 02:09 ascii@ -> lt_LN.ASCII drwxr-xr-x 2 bin bin 512 Nov 26 02:31 da_DK.ISO_8859-1/ drwxr-xr-x 2 bin bin 512 Nov 26 02:31 de_AT.ISO_8859-1/ drwxr-xr-x 2 bin bin 512 Nov 26 02:31 de_CH.ISO_8859-1/ drwxr-xr-x 2 bin bin 512 Nov 26 02:31 de_DE.ISO_8859-1/ drwxr-xr-x 2 bin bin 512 Nov 26 02:31 en_AU.ISO_8859-1/ drwxr-xr-x 2 bin bin 512 Nov 26 02:31 en_CA.ISO_8859-1/ drwxr-xr-x 2 bin bin 512 Nov 26 02:31 en_GB.ISO_8859-1/ drwxr-xr-x 2 bin bin 512 Nov 26 02:31 en_US.ISO_8859-1/ drwxr-xr-x 2 bin bin 512 Nov 26 02:31 es_ES.ISO_8859-1/ drwxr-xr-x 2 bin bin 512 Nov 26 02:31 fi_FI.ISO_8859-1/ drwxr-xr-x 2 bin bin 512 Nov 26 02:31 fr_BE.ISO_8859-1/ drwxr-xr-x 2 bin bin 512 Nov 26 02:31 fr_CA.ISO_8859-1/ drwxr-xr-x 2 bin bin 512 Nov 26 02:31 fr_CH.ISO_8859-1/ drwxr-xr-x 2 bin bin 512 Nov 26 02:31 fr_FR.ISO_8859-1/ drwxr-xr-x 2 bin bin 512 Nov 26 02:31 hr_HR.ISO_8859-2/ drwxr-xr-x 2 bin bin 512 Nov 26 02:31 is_IS.ISO_8859-1/ drwxr-xr-x 2 bin bin 512 Nov 26 02:31 it_CH.ISO_8859-1/ drwxr-xr-x 2 bin bin 512 Nov 26 02:31 it_IT.ISO_8859-1/ drwxr-xr-x 2 bin bin 512 Nov 26 02:31 ja_JP.EUC/ drwxr-xr-x 2 bin bin 512 Nov 26 02:28 ja_JP.SJIS/ drwxr-xr-x 2 bin bin 512 Nov 26 02:31 ko_KR.EUC/ drwxr-xr-x 2 bin bin 512 Nov 26 02:31 lt_LN.ASCII/ drwxr-xr-x 2 bin bin 512 Nov 26 02:31 lt_LN.ISO_8859-1/ drwxr-xr-x 2 bin bin 512 Nov 26 02:31 lt_LN.ISO_8859-2/ drwxr-xr-x 2 bin bin 512 Nov 26 02:31 nl_BE.ISO_8859-1/ drwxr-xr-x 2 bin bin 512 Nov 26 02:31 nl_NL.ISO_8859-1/ drwxr-xr-x 2 bin bin 512 Nov 26 02:31 no_NO.ISO_8859-1/ drwxr-xr-x 2 bin bin 512 Nov 26 02:31 pt_PT.ISO_8859-1/ lrwxrwxrwx 1 root bin 11 Nov 26 02:09 ru_RU.CP866@ -> ru_SU.CP866 lrwxrwxrwx 1 root bin 12 Nov 26 02:09 ru_RU.KOI8-R@ -> ru_SU.KOI8-R drwxr-xr-x 2 bin bin 512 Nov 26 02:31 ru_SU.CP866/ drwxr-xr-x 2 bin bin 512 Nov 26 02:31 ru_SU.KOI8-R/ drwxr-xr-x 2 bin bin 512 Nov 26 02:31 sv_SE.ISO_8859-1/ lrwxrwxrwx 1 root bin 11 Nov 26 02:09 us-ascii@ -> lt_LN.ASCII I do setenv LANG sv_SE.ISO_8859-1 and setenv MM_CHARSET ISO-8859-1 in /etc/csh.login. But you need to get the locale files. Not sure of the best way, but they are probably on the CD, if you have one. /palle From owner-freebsd-questions Sat Jan 3 09:07:59 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id JAA20462 for questions-outgoing; Sat, 3 Jan 1998 09:07:59 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from techpower.net (root@techpower.net [205.133.231.1]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id JAA20452 for ; Sat, 3 Jan 1998 09:07:52 -0800 (PST) (envelope-from hometeam@techpower.net) Received: from localhost (hometeam@localhost) by techpower.net (8.8.8/8.8.5) with SMTP id LAA03678 for ; Sat, 3 Jan 1998 11:45:08 GMT Date: Sat, 3 Jan 1998 11:45:08 +0000 (GMT) From: homey To: questions@freebsd.org Subject: printers Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I have a Canon MultiPASS C2500 colour printer/fax/copier anyone have any examples printcaps ..Or know where I can find some? thanks in advance hometeam@techpower.net --We cannot all be masters, nor all masters Cannot be truly follow'd-- -----BEGIN PGP MESSAGE----- Version: 2.6.2 owEBqwBU/4kAlQMFADRCxNWhsddKSTR+6QEBelED/jzeC3btZfqSdIfrNoCgwUJJ iNQ33UQoMyJ2ygkfl72xP5J79yml/F4P73GnNaDVbaMOmOG2NNAi5ElE73wRh54U 17kH+n5XnYeqekV8T2TG2Q6ex3UotXPyZ1vvrCrSxapOz6a4hh0GQeA55rcwLy2W ROHwxfvaVsrX5iVOkRoerBFiC21lc3NhZ2UudHh0AAAAAA== =jCvF -----END PGP MESSAGE----- From owner-freebsd-questions Sat Jan 3 09:23:11 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id JAA21173 for questions-outgoing; Sat, 3 Jan 1998 09:23:11 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from argon.linkzone.com (argon.linkzone.com [204.182.59.32]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id JAA21164 for ; Sat, 3 Jan 1998 09:23:06 -0800 (PST) (envelope-from mlt@linkzone.com) Received: from localhost (mlt@localhost) by argon.linkzone.com (8.8.7/8.8.5) with SMTP id JAA09401; Sat, 3 Jan 1998 09:21:30 -0800 (PST) Date: Sat, 3 Jan 1998 09:21:30 -0800 (PST) From: Mark Turrin To: Brian Somers cc: Jason McKay , questions@FreeBSD.ORG Subject: Re: PPP and Routing Problems In-Reply-To: <199801031453.OAA14420@awfulhak.demon.co.uk> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Sat, 3 Jan 1998, Brian Somers wrote: > > I'm having a routing problem with ppp, users can successfully > > connect with ppp and access our other machines on the LAN ... But they > > can't access the outside world. Gateway is set to YES in rc.conf, and > > enable proxy is in the ppp.conf file. Shell users can access the outside > > world without any problems. It's only restricted to ppp users. > > > > I would be greatful for any help. Be sure you have set the IP number for the gateway in the ppp users software. ___________________________________________________________________ Mark L. Turrin Drag me, drop me, treat me like an object! mlt@linkzone.com From owner-freebsd-questions Sat Jan 3 09:23:13 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id JAA21180 for questions-outgoing; Sat, 3 Jan 1998 09:23:13 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from millennium.net (mrvid.demon.co.uk [194.222.140.15]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id JAA21163 for ; Sat, 3 Jan 1998 09:23:05 -0800 (PST) (envelope-from lists@mrvid.demon.co.uk) Received: from localhost (localhost [127.0.0.1]) by millennium.net (8.8.5/8.8.5) with SMTP id NAA04241; Fri, 2 Jan 1998 13:31:10 GMT Date: Fri, 2 Jan 1998 13:29:48 +0000 (GMT) From: Lists X-Sender: lists@millennium.net To: Doug White cc: Mark Ibell , freebsd-questions@FreeBSD.ORG Subject: Re: Win95 <-> FreeBSD In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk > > Now that I have IP aliasing (ppp -alias option) working under > > FreeBSD, I would like to connect a Win95 box to a FreeBSD box > > using a laplink cable. This idea prompts a couple of questions: > > (1) Does anybody know whether Win95 supports TCP/IP over the > > parallel port? If so, how is it done? > Unless someone writes a PLIP driver for WIn95, I doubt it's Direct cable > Connection stuff will work. I've actually managed this from a Win95 box running Winsock (32-bit) to a Linux box (running pppd) and it worked fine. I presume the same thing would work with BSD. L8rz KrOnUs From owner-freebsd-questions Sat Jan 3 09:58:06 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id JAA23374 for questions-outgoing; Sat, 3 Jan 1998 09:58:06 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from smtp1.mailsrvcs.net (smtp1.gte.net [207.115.153.30]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id JAA23369 for ; Sat, 3 Jan 1998 09:57:58 -0800 (PST) (envelope-from aims@gte.net) Received: from denali.aimsllc.com (1Cust18.tnt14.sfo3.da.uu.net [153.37.39.18]) by smtp1.mailsrvcs.net with SMTP id LAA15498 for ; Sat, 3 Jan 1998 11:56:55 -0600 (CST) Message-ID: <34AE7CE4.4DAA@gte.net> Date: Sat, 03 Jan 1998 11:01:08 -0700 From: Bob Angell Organization: Applied Information & Management Systems (AIMS) X-Mailer: Mozilla 3.0Gold (X11; U; AIX 2) MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: Wine and 2.2.5 / Desktop Colors Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk I am trying with very little success to install an older version of WinWord 2.0c on my FreeBSD machine using wine. I mount the first floppy in drive A (/dev/fd0.1440) and try to run setup and it just core dumps all over the place. Does this need to be installed independent of FBSD and then mount the drive/directory into the system? Any/all help in this matter would be greatly appreciated. One more thing, I am running the Win95 window manager (BTW, those who did this work - many "Atta-boys"!!) and would like to change the background color on the desktop and have yet to find the file with those settings ... anyone? Thanks, -Bob- -- Bob Angell, Principal - Sys. Engineer/Author/Consultant Applied Info & Mgnt Sys, 1238 Fenway Ave., SLC, UT 84102 v801-583-8544 mailto:aimsllc@ibm.net mailto:aims@gte.net -------------------------------------------------------- http://home1.gte.net/aims/index.htm -------------------------------------------------------- "Had Mama Cass and Karen Carpenter shared that Ham sand- wich, they would both be with us today!" From owner-freebsd-questions Sat Jan 3 10:32:40 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id KAA24729 for questions-outgoing; Sat, 3 Jan 1998 10:32:40 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from adam.adonai.net (adam.adonai.net [207.8.83.2]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id KAA24721 for ; Sat, 3 Jan 1998 10:32:36 -0800 (PST) (envelope-from leec@adam.adonai.net) Received: from localhost (leec@localhost) by adam.adonai.net (8.8.5/8.7.3) with SMTP id MAA15472 for ; Sat, 3 Jan 1998 12:32:31 -0600 (CST) Date: Sat, 3 Jan 1998 12:32:30 -0600 (CST) From: "Lee Crites (AEI)" Reply-To: "Lee Crites (AEI)" To: freebsd-questions@freebsd.org Subject: Re: Who uses the wine port? -- results... Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk One of my whopping six respondents asked me to publish my results to the list, so here they are: -- 2 use it for a single application, and only when they have to -- 1 was interested in trying -- 3 wanted to know my results I received two additional replies to my original email, both of which were pointers to how I can use my scanner (thanks!). It seems, then, from the rather underwhelming response, that wine really isn't used that often. I'm still going to plow ahead with it, though. If I get some clients who want to convert from windoze to a real os, they might still need to have access to some of the old applications. Lee From owner-freebsd-questions Sat Jan 3 11:44:04 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id LAA28944 for questions-outgoing; Sat, 3 Jan 1998 11:44:04 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from piggy.mdstud.chalmers.se (root@piggy.mdstud.chalmers.se [129.16.234.10]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id LAA28920 for ; Sat, 3 Jan 1998 11:44:00 -0800 (PST) (envelope-from md6tommy@mdstud.chalmers.se) Received: from grosse.mdstud.chalmers.se (md6tommy@grosse.mdstud.chalmers.se [129.16.234.21]) by piggy.mdstud.chalmers.se (8.8.5/8.8.5) with ESMTP id UAA05054; Sat, 3 Jan 1998 20:43:53 +0100 (MET) Received: from localhost (md6tommy@localhost) by grosse.mdstud.chalmers.se (8.8.5/8.8.5) with SMTP id UAA29279; Sat, 3 Jan 1998 20:43:50 +0100 (MET) X-Authentication-Warning: grosse.mdstud.chalmers.se: md6tommy owned process doing -bs Date: Sat, 3 Jan 1998 20:43:49 +0100 (MET) From: Tommy Hallgren To: freebsd-questions@freebsd.org cc: md6tommy@mdstud.chalmers.se Subject: 2.2.1 to 2.2-stable Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Hi! Can anyone tell me if it is faster to install 2.2.1 sources and cvsup to 2.2-stable or to clean /usr/src and then cvsup to 2.2-stable? My machine is a 486 66MHz and my modem a 33k6 one and I'm currently running 2.2.1 FreeBSD. (Please cc me since I'm not on this list) regards, Tommy From owner-freebsd-questions Sat Jan 3 12:38:50 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id MAA01814 for questions-outgoing; Sat, 3 Jan 1998 12:38:50 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from zerium.newmedia.no (root@[194.198.117.66]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id MAA01788 for ; Sat, 3 Jan 1998 12:38:41 -0800 (PST) (envelope-from hanspb@persbraten.vgs.no) Received: from localhost (hanspbie@localhost [127.0.0.1]) by zerium.newmedia.no (8.8.8/8.8.7) with SMTP id UAA00318 for ; Sat, 3 Jan 1998 20:24:40 +0100 (CET) Date: Sat, 3 Jan 1998 20:24:39 +0100 (CET) From: Hans Petter Bieker X-Sender: hanspbie@zerium.newmedia.no To: questions@freebsd.org Subject: Why dump to /var?? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I got this message after a recent system crash: checking for core dump...savecore: reboot after panic: page fault savecore: system went down at Sat Jan 3 18:35:32 1998 savecore: no dump, not enough free space on device not enough free space? On which device? in my /var/crash directory? How much space does actually this dump need? Equal to the size of my swap partition? If so.. why dump to /var by default. Most people don't have hundreds of mb's free in var? Maybe a comment in /etc/rc.conf about this? Maybe savecore should say something like this: savecore: /var: no dump, not enough free space on device Anyone? Any why not send this error msg to syslogd? (This is a good thing if you don't have a serial console.) Filesystems: Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/wd0a 31775 18954 10279 65% / /dev/wd0s1f 377238 240884 106175 69% /usr /dev/wd0s1e 29727 3249 24100 12% /var /dev/wd1s1e 808223 494311 249255 66% /home procfs 4 4 0 100% /proc Swap: Device 1K-blocks Used Avail Capacity Type /dev/wd0s1b 174048 0 173984 0% Interleaved I have 80 MB ram. From owner-freebsd-questions Sat Jan 3 12:41:20 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id MAA02085 for questions-outgoing; Sat, 3 Jan 1998 12:41:20 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from www.dancooks.com (www.dancooks.com [204.180.122.2]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id MAA02070 for ; Sat, 3 Jan 1998 12:41:09 -0800 (PST) (envelope-from jasonh@cei.net) Received: from thanatosis (max3-26.cei.net [204.180.118.122]) by www.dancooks.com (8.8.8/8.8.7) with SMTP id OAA03521 for ; Sat, 3 Jan 1998 14:45:51 -0600 (CST) (envelope-from jasonh@cei.net) Message-ID: <005401bd1887$d6308ec0$7a76b4cc@thanatosis> From: "Jason Hudgins" To: Subject: Good backup hardware for FreeBsd? Date: Sat, 3 Jan 1998 14:39:55 -0600 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 4.72.2106.4 X-MimeOLE: Produced By Microsoft MimeOLE V4.72.2106.4 Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk >I'm in a similar situation. What happens for you is that the tape has >reached the end (my guess; I get write errors when I reach >end-of-tapes), and is trying to tell you this on the tty; "fopen on >/dev/tty" means that it cannot talk to a console, probably because >you're running it from cron, or detached the dump process from the >tty. I don't think this is the case, because some of the time it actually works, just not often. And it dies at random times, sometimes at say 25% sometimes at 85%, ...etc...etc. >AFAIK, you can't run dump from cron, at least not directly. (I'd like to >hear from you folks! How do you make automated dumps?) Dump needs >user interaction when an error or end-of-tape occurs, or it will get >suspended or fail. Again, I've gotten it to work from cron, though I've never tried to call dump from cron directly. My cronjob calls a perlscript that first rewinds the tape, and then does a dump of /usr to /dev/nrst0. The perl script redirects the output of dump and logs it into a PostgresSQL database, which I then can examine from some web pages.. Its a pretty nice setup, but then again, I only get a successful backup about 15% of the time. When I originally had it setup, for the first two weeks, it was working 100% everyday, but then it started failing, and now it hardly ever works. I use a different tape every day of the week, and they are 4 gig cartridges. My whole /usr filesystem maybe has about 2 gigs of data on it.. >What does your dump command look like? If your tape can swallow no more >than 2GB, you've reached the end-of-tape. Using the B option, yuo can >tell dump about the tape lenght, and get "tape-end" instead of >"write-error". If you expect hardware compression, are you sure it is >switched on? Probably not? something like this, (from memory) dump -0uf /dev/nrst0 /usr I'm not opposed to purchasing new backup hardware if anyone has any solid suggestions. Of course I still haven't completely determined if its a hardware failure, but that my best guess.. Jason From owner-freebsd-questions Sat Jan 3 13:09:55 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id NAA03519 for questions-outgoing; Sat, 3 Jan 1998 13:09:55 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from jupiter.neptune.net (jupiter.neptune.net [204.107.103.2]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id NAA03514 for ; Sat, 3 Jan 1998 13:09:53 -0800 (PST) (envelope-from doug@mailhost.neptune.net) Received: (from doug@localhost) by jupiter.neptune.net (8.7.5/8.7.3) id NAA19710; Sat, 3 Jan 1998 13:07:54 -0800 (PST) Date: Sat, 3 Jan 1998 13:07:54 -0800 (PST) Message-Id: <199801032107.NAA19710@jupiter.neptune.net> To: questions@freebsd.org From: Doug Jolley Subject: PPP Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Could someone please give me an overview of what I need to do to connect my FreeBSD box via PPP to my ISP. I alrady have networking/tcpip setup. Thanks for any input. ... doug _____________________________________________________________________ Doug Jolley mailto://doug@bigwheel.net http://www.bigwheel.net Don't bogart that file, my friend. Net it over to me. --------------------------------------------------------------------- From owner-freebsd-questions Sat Jan 3 13:51:18 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id NAA05907 for questions-outgoing; Sat, 3 Jan 1998 13:51:18 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from vms3.isc.rit.edu (vms3.isc.rit.edu [129.21.3.10]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id NAA05896 for ; Sat, 3 Jan 1998 13:51:09 -0800 (PST) (envelope-from rmill@rochgrp.com) Received: from rochgrp.com by ritvax.isc.rit.edu (PMDF V5.1-10 #14499) with SMTP id <01IRY426CQGWAJKY5J@ritvax.isc.rit.edu> for freebsd-questions@freebsd.org; Sat, 3 Jan 1998 16:51:07 EST Received: from rochgrp.com by rochgrp.com (SMI-8.6/SMI-SVR4) id QAA11468; Sat, 03 Jan 1998 16:47:22 -0500 Date: Sat, 03 Jan 1998 16:55:08 -0500 From: Bob Miller Subject: ppp To: freebsd-questions@freebsd.org Message-id: <34AEB3BC.D11D6D4B@rochgrp.com> Organization: The Rochester Group, Inc. MIME-version: 1.0 X-Mailer: Mozilla 4.03 [en] (X11; I; Linux 2.0.30 i586) Content-type: multipart/mixed; boundary="------------58EF0B2D880C7516BF86C8F8" Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk This is a multi-part message in MIME format. --------------58EF0B2D880C7516BF86C8F8 Content-Type: multipart/alternative; boundary="------------93A8B2F492DBE26E995465E4" --------------93A8B2F492DBE26E995465E4 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hi. Is this the right place for this question? I'm using ppp to dial up my network at work (13.*). I now want to make an additional connection to the internet via IBM's internet service. I've got the second connection dialed up, so netstat shows: rmill@gwozmilla> netstat -nr Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire default 13.231.66.8 UGSc 5 1438 tun0 13.231.66.8 13.231.66.10 UH 5 0 tun0 13.231.66.10 127.0.0.1 UH 0 0 lo0 127.0.0.1 127.0.0.1 UH 1 764 lo0 127.1.1.1 127.0.0.1 UH 0 0 lo0 127.2.2.2 127.1.1.1 UH 0 0 tun0 166.72.87.229 127.0.0.1 UH 0 0 lo0 192.168.76/23 link#1 UC 0 0 192.168.77.5 0:60:97:8f:2d:b0 UHLW 5 4915 ed1 1099 204.146.253.145 166.72.87.229 UH 0 0 tun1 ... but when I ping 204.146.253.145, I see the modem send light blinking but don't receive anything. Can you suggest other things to try (or direct me to the right place to ask the question)? Thanks. --------------93A8B2F492DBE26E995465E4 Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit Hi. Is this the right place for this question?  I'm using ppp to dial up my network at work (13.*). I now want to make an additional connection to the internet via IBM's internet service. I've got the second connection dialed up, so netstat shows:

rmill@gwozmilla> netstat -nr
Routing tables

Internet:
Destination        Gateway            Flags     Refs     Use     Netif Expire
default            13.231.66.8        UGSc        5     1438      tun0
13.231.66.8        13.231.66.10       UH          5        0      tun0
13.231.66.10       127.0.0.1          UH          0        0       lo0
127.0.0.1          127.0.0.1          UH          1      764       lo0
127.1.1.1          127.0.0.1          UH          0        0       lo0
127.2.2.2          127.1.1.1          UH          0        0      tun0
166.72.87.229      127.0.0.1          UH          0        0       lo0
192.168.76/23      link#1             UC          0        0
192.168.77.5       0:60:97:8f:2d:b0   UHLW        5     4915       ed1   1099
204.146.253.145    166.72.87.229      UH          0        0      tun1

... but when I ping 204.146.253.145, I see the modem send light blinking but don't receive anything. Can you suggest other things to try (or direct me to the right place to ask the question)? Thanks. --------------93A8B2F492DBE26E995465E4-- --------------58EF0B2D880C7516BF86C8F8 Content-Type: text/x-vcard; charset=us-ascii; name="vcard.vcf" Content-Transfer-Encoding: 7bit Content-Description: Card for Bob Miller Content-Disposition: attachment; filename="vcard.vcf" begin: vcard fn: Bob Miller n: Miller;Bob org: The Rochester Group, Inc. adr: 600 Park Avenue;;;Rochester;NY;14607;USA email;internet: rmill@rochgrp.com title: President tel;work: 716 271 1110 tel;fax: 716 271 1230 x-mozilla-cpt: ;0 x-mozilla-html: FALSE version: 2.1 end: vcard --------------58EF0B2D880C7516BF86C8F8-- From owner-freebsd-questions Sat Jan 3 14:01:02 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id OAA06459 for questions-outgoing; Sat, 3 Jan 1998 14:01:02 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from cheech.ihug.co.nz (cheech.ihug.co.nz [203.29.160.9]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id OAA06444 for ; Sat, 3 Jan 1998 14:00:52 -0800 (PST) (envelope-from marki@ihug.co.nz) Received: from myname.my.domain (p56-max11.auck.ihug.co.nz [209.76.150.184]) by cheech.ihug.co.nz (8.8.8/8.8.8) with SMTP id LAA23876; Sun, 4 Jan 1998 11:00:56 +1300 Message-ID: <34ADFE62.41C67EA6@ihug.co.nz> Date: Sat, 03 Jan 1998 22:01:22 +1300 From: Mark Ibell X-Mailer: Mozilla 3.04 (X11; I; FreeBSD 2.2.5-RELEASE i386) MIME-Version: 1.0 To: Doug Jolley CC: freebsd-questions@FreeBSD.ORG Subject: Re: PPP References: <199801032107.NAA19710@jupiter.neptune.net> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Doug Jolley wrote: > > Could someone please give me an overview of what I need to > do to connect my FreeBSD box via PPP to my ISP. I alrady > have networking/tcpip setup. Thanks for any input. > > ... doug > _____________________________________________________________________ > Doug Jolley mailto://doug@bigwheel.net http://www.bigwheel.net > Don't bogart that file, my friend. Net it over to me. > --------------------------------------------------------------------- First decide whether you want to use kernel or user ppp; started via pppd or ppp respectively. Setup of both basically involves editting files in '/etc/ppp'. But don't forget '/etc/resolv.conf'. I feel kernel ppp is easier to set up but offers less flexibility than user ppp. Reading the man pages pppd(8) and/or ppp(8) should suffice. If you still have further questions don't hesitate to ask. Go to it lad, Mark From owner-freebsd-questions Sat Jan 3 14:02:56 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id OAA06627 for questions-outgoing; Sat, 3 Jan 1998 14:02:56 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from Moonraker.afsc.k12.ar.us ([170.211.144.146]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id OAA06622 for ; Sat, 3 Jan 1998 14:02:53 -0800 (PST) (envelope-from bbeavers@Moonraker.afsc.k12.ar.us) Received: (from bbeavers@localhost) by Moonraker.afsc.k12.ar.us (8.8.3/8.8.3) id QAA27995; Sat, 3 Jan 1998 16:58:36 GMT Date: Sat, 3 Jan 1998 16:58:35 +0000 () From: Bill Beavers To: Charlie Roots cc: Patrick Gardella , freebsd-questions@freebsd.org Subject: Re: Fatal Trap 12: Panic In-Reply-To: <19971231012748.616.rocketmail@send1a.yahoomail.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I had this trouble and when I disabled the sleep function in the servers CMOS, it stopped. Apparently the machine panics when if wakes up and a process request ( I hardly know what I am talking about) is already underway, and then things just go haywire! Well, anyway that worked for me. Bill > > > > Obviously, the easy fix is to not let anyone FTP out! But that > won't work too > > well, I don't think. > > > > So what other ideas do you all have? > > > > Patrick > > > > P.S. Since this is network related, here is my netstat: > > > > # netstat -rn > > Routing tables > > > > Internet: > > Destination Gateway Flags Refs Use > Netif Expire > > default 204.255.239.10 UGSc 2 4 tun0 > > 127.0.0.1 127.0.0.1 UH 0 0 lo0 > > 127.0.0.2 127.0.0.2 UH 0 0 lo0 > > 127.0.0.3 127.0.0.3 UH 0 0 lo0 > > 127.0.0.4 127.0.0.4 UH 0 0 lo0 > > 127.0.0.5 127.0.0.5 UH 0 0 lo0 > > 127.0.0.6 127.0.0.6 UH 0 0 lo0 > > 127.0.0.7 127.0.0.7 UH 0 0 lo0 > > 127.0.0.8 127.0.0.8 UH 0 0 lo0 > > 192.168.1 link#1 UC 0 0 > > 192.168.1.2 0:40:10:55:e1:2 UHLW 1 1 > lnc1 2 > > 192.168.1.3 0:0:f4:af:3:b4 UHLW 0 1 lo0 > > 192.168.1.5 8:0:7:a6:49:f4 UHLW 1 43 > lnc1 889 > > 204.255.239.10 204.255.227.108 UH 3 0 tun0 > > > > Hi Patrick; > Just about 99.9 % of your problem is due to ftpd. > I suggest you tell us which ftpd you are using. > If you are using ftpd that came with the FreeBSD distribution, JUST > FORGET IT, and install wu-ftpd > it is in the /usr/ports/net; > Download it and ENJOY !!! > > I think ALL your trouble will VANISH then. > > PS. FreeBSD-CORE guys, IS THIS A KNOWN BUGGGG ??? > aka (gotcha) > > I use wu-ftpd , and is working like CHARM. > Meanwhile you should use whatever means to avoid the PANIC, as you and > your friends on the network will probably LOOSE data, which is not > welcome, you may also, unlikely though, get somesort of HD trouble, > since your panic may NOT shutdown the system cleanly. I suppose you > alread know how to deny a service like ftp, temporarily. > > Greetings > > > == > MAY THE FORCE BE WITH YOU. > _________________________________________________________ > DO YOU YAHOO!? > Get your free @yahoo.com address at http://mail.yahoo.com > > ........................................ . Bill Beavers, Technology Coordinator . . Arch Ford Education Coop . . bbeavers@moonraker.afsc.k12.ar.us . . http://moonraker.afsc.k12.ar.us . ........................................ From owner-freebsd-questions Sat Jan 3 14:44:38 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id OAA08890 for questions-outgoing; Sat, 3 Jan 1998 14:44:38 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from Moonraker.afsc.k12.ar.us ([170.211.144.146]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id OAA08871 for ; Sat, 3 Jan 1998 14:44:19 -0800 (PST) (envelope-from bbeavers@Moonraker.afsc.k12.ar.us) Received: (from bbeavers@localhost) by Moonraker.afsc.k12.ar.us (8.8.3/8.8.3) id RAA28049; Sat, 3 Jan 1998 17:40:04 GMT Date: Sat, 3 Jan 1998 17:40:04 +0000 () From: Bill Beavers To: questions@freebsd.org Subject: dialup pppd problems Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Since ppp seems to be the problem of the day (or days), here is mine and I hope someone has the answer. I have a FreeBSD 2.1.7 machine set up a a high school that I help out, and this box is configured as a dialup router with 18 dynamic IP #'s assigned to it. I am running pppd for users to dialup to via modem. The BSD machine has a Cyclades multiport 16Ye serial board connected via the ISA cylades board. My problem is this. I or any user can dial up to the first ttyc00 (positively) or second modem ttyc01 (usually) and maintain a good solid internet connection indefinitely with NO problems. But if users hits the 3rd through the 16th modem, then they usually can only stay connected for around 2 to 3 minutes, sometimes longer, but not much. The modems are Practical Peripherals 56k modems. I have tipped all modems the same, so I don't think that is the problem. But is this ramdom disconnecting a faulty ppp connection, or a modem problem. How can I get any info on what is causing this. netstat -i and -rn don't seem to reveal much, the /var/log files only mention inappropriate ioctl's , etc, but that only seems to pop up on any disconnect anyway normal or otherwise, and since the first two modems seem to be fine, I am just at a loss as to how to get all these others maintaining good connections. Any ideas? I sure would appreciate it! ........................................ . Bill Beavers, Technology Coordinator . . Arch Ford Education Coop . . bbeavers@moonraker.afsc.k12.ar.us . . http://moonraker.afsc.k12.ar.us . ........................................ From owner-freebsd-questions Sat Jan 3 15:30:49 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id PAA10837 for questions-outgoing; Sat, 3 Jan 1998 15:30:49 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from allegro.lemis.com (allegro.lemis.com [192.109.197.134]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id PAA10832 for ; Sat, 3 Jan 1998 15:30:44 -0800 (PST) (envelope-from grog@lemis.com) Received: from freebie.lemis.com (freebie.lemis.com [192.109.197.137]) by allegro.lemis.com (8.8.7/8.8.5) with ESMTP id KAA20583; Sun, 4 Jan 1998 10:00:05 +1030 (CST) Received: (from grog@localhost) by freebie.lemis.com (8.8.8/8.8.7) id KAA07049; Sun, 4 Jan 1998 10:00:05 +1030 (CST) (envelope-from grog) Message-ID: <19980104100004.00510@lemis.com> Date: Sun, 4 Jan 1998 10:00:04 +1030 From: Greg Lehey To: Duck Dogers Cc: freebsd-questions@FreeBSD.ORG Subject: Re: File Allocation Tables References: <34AE5796.CB72F052@cris.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.84e In-Reply-To: <34AE5796.CB72F052@cris.com>; from Duck Dogers on Sat, Jan 03, 1998 at 07:21:58AM -0800 Organisation: LEMIS, PO Box 460, Echunga SA 5153, Australia Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-41-739-7062 WWW-Home-Page: http://www.lemis.com/~grog Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Sat, Jan 03, 1998 at 07:21:58AM -0800, Duck Dogers wrote: > Will Free BSD work on a FAT32 system? The question is the other way around, more like "Will FAT32 work on a FreeBSD system?". The answer is that it's currently in early implementation stages. If you want to experiment with it, grab it (from the FreeBSD-current distribution). If you want solid software, wait. > If not naturally can the image program written for unix work for > Free BSD as well? FreeBSD *is* UNIX, except that the lawyers won't let us call it that. Yes, if you get UNIX software in source, you can compile it for FreeBSD. If you get it in object form, it depends on the UNIX system, as it does on any other UNIX system. Greg From owner-freebsd-questions Sat Jan 3 15:49:06 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id PAA11967 for questions-outgoing; Sat, 3 Jan 1998 15:49:06 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from Moonraker.afsc.k12.ar.us ([170.211.144.146]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id PAA11936 for ; Sat, 3 Jan 1998 15:48:52 -0800 (PST) (envelope-from bbeavers@Moonraker.afsc.k12.ar.us) Received: (from bbeavers@localhost) by Moonraker.afsc.k12.ar.us (8.8.3/8.8.3) id SAA28110; Sat, 3 Jan 1998 18:44:42 GMT Date: Sat, 3 Jan 1998 18:44:42 +0000 () From: Bill Beavers To: questions@freebsd.org Subject: addition to pppd dialup problem Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I meant to mention one other little anomalie concerning my dialup problems via pppd. On the first try from most any computer (most are Windows 95) the modem connects, then immediately disconnects, then redials ( I have auto redial set up) and will connect on the second try. I do not have this problem from my laptop via a pcmcia modem, but I do from most any desktop or tower system irespective of the modem type. If I pull up the little scripting box (win95) on the first try, it is blank, but on the second try it runs my script fine. I think this is somehow also tied to my disconnect problems. ........................................ . Bill Beavers, Technology Coordinator . . Arch Ford Education Coop . . bbeavers@moonraker.afsc.k12.ar.us . . http://moonraker.afsc.k12.ar.us . ........................................ From owner-freebsd-questions Sat Jan 3 15:58:24 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id PAA12523 for questions-outgoing; Sat, 3 Jan 1998 15:58:24 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from allegro.lemis.com (allegro.lemis.com [192.109.197.134]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id PAA12502; Sat, 3 Jan 1998 15:58:05 -0800 (PST) (envelope-from grog@lemis.com) Received: from freebie.lemis.com (freebie.lemis.com [192.109.197.137]) by allegro.lemis.com (8.8.7/8.8.5) with ESMTP id KAA20602; Sun, 4 Jan 1998 10:28:00 +1030 (CST) Received: (from grog@localhost) by freebie.lemis.com (8.8.8/8.8.7) id KAA07265; Sun, 4 Jan 1998 10:27:59 +1030 (CST) (envelope-from grog) Message-ID: <19980104102759.11459@lemis.com> Date: Sun, 4 Jan 1998 10:27:59 +1030 From: Greg Lehey To: Hans Petter Bieker Cc: questions@FreeBSD.ORG, FreeBSD Hackers Subject: Re: Why dump to /var?? Reply-To: FreeBSD Hackers References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.84e In-Reply-To: ; from Hans Petter Bieker on Sat, Jan 03, 1998 at 08:24:39PM +0100 Organisation: LEMIS, PO Box 460, Echunga SA 5153, Australia Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-41-739-7062 WWW-Home-Page: http://www.lemis.com/~grog Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Sat, Jan 03, 1998 at 08:24:39PM +0100, Hans Petter Bieker wrote: > I got this message after a recent system crash: > checking for core dump...savecore: reboot after panic: page fault > savecore: system went down at Sat Jan 3 18:35:32 1998 > savecore: no dump, not enough free space on device > > not enough free space? On which device? in my /var/crash directory? Presumably, unless you've changed /etc/rc. > How much space does actually this dump need? Equal to the size of my > swap partition? Equal to the size of your memory. It's a memory dump. > If so.. why dump to /var by default. Most people don't have hundreds > of mb's free in var? Maybe a comment in /etc/rc.conf about this? I suppose there's some value in this. Why don't you enter a PR suggesting it? I suspect, however, that a number of core team members would like to keep it short. I'm copying -hackers on this message. Please follow up there. > Maybe savecore should say something like this: > > savecore: /var: no dump, not enough free space on device Well, one reason not to do this change is the possible symbolic link, which makes it possible to put /var/crash on some other file system. The other thing is that savecore almost invariably saves to /var/crash, so it doesn't add much value. > Anyone? Any why not send this error msg to syslogd? It's not running at this point. > (This is a good thing if you don't have a serial console.) Yes, there is some merit in the idea of starting syslogd earlier and logging *all* the startup messages. I did it once for a commercial vendor, and it made looking for errors a lot easier. If I have time on my hands, I may have another go. > Filesystems: > Filesystem 1K-blocks Used Avail Capacity Mounted on > /dev/wd0a 31775 18954 10279 65% / > /dev/wd0s1f 377238 240884 106175 69% /usr > /dev/wd0s1e 29727 3249 24100 12% /var > /dev/wd1s1e 808223 494311 249255 66% /home > procfs 4 4 0 100% /proc > > Swap: > Device 1K-blocks Used Avail Capacity Type > /dev/wd0s1b 174048 0 173984 0% Interleaved > > I have 80 MB ram. Looking at this configuration, I'd suggest creating a directory /home/crash and a symlink /var/crash pointing to it. One thing you should be aware of is that the dump doesn't go away immediately when you start the system. It's at the end of the swap partition, so you can almost invariably manually do a savecore when the system is up and running and (in your case) not using more than half the available swap space. Greg From owner-freebsd-questions Sat Jan 3 16:00:38 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id QAA12742 for questions-outgoing; Sat, 3 Jan 1998 16:00:38 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from snel.execulink.com (snel.execulink.com [199.166.6.4]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id QAA12726 for ; Sat, 3 Jan 1998 16:00:27 -0800 (PST) (envelope-from tjokela@execulink.com) Received: from lizard (ppp0.a6.execulink.com [207.216.160.30]) by snel.execulink.com (8.8.7/8.8.7) with SMTP id TAA29239 for ; Sat, 3 Jan 1998 19:00:19 -0500 (EST) Date: Sat, 3 Jan 1998 19:00:19 -0500 (EST) Message-Id: <199801040000.TAA29239@snel.execulink.com> X-Sender: tjokela@execulink.com X-Mailer: Windows Eudora Version 1.4.4 Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" To: questions@freebsd.org From: tjokela@execulink.com (Tim Jokela) Subject: Do you support spam? Re: "Invitation to list your Web Site" Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I notice that you advertise at the website responsible for sending me the spam quoted below, . I hope that you do not support spam. Please inform whoever is in charge at aaex.com that spamming is contrary to honest Internet business practices. Sincerely, Tim Jokela Jr tjokela@execulink.com >Received: from x-mail.net ([207.112.236.164]) > by snel.execulink.com (8.8.7/8.8.7) with SMTP id QAA00894 > for ; Sat, 3 Jan 1998 16:46:21 -0500 (EST) >From: admin@infobase-intl.com >Received: from [206.12.96.77] by x-mail.net (NX5.67g/NX3.0M) > id AA10853; Sat, 3 Jan 98 13:46:24 -0800 >Date: Sat, 3 Jan 98 13:46:24 -0800 >Message-Id: <9801032146.AA10853@x-mail.net > >To: tjokela@execulink.com >Subject: Invitation to list your Web Site >X-UIDL: c2e144eb4e804b1aaaf44a30bd8ca560 > >Hello.... > >We invite you to list your Web Site free of charge in our new Internet Directory located at: > >http://www.infobase-intl.com > > > >Regards, > > >Nancy >admin@infobase-intl.com > > > > From owner-freebsd-questions Sat Jan 3 16:48:48 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id QAA15166 for questions-outgoing; Sat, 3 Jan 1998 16:48:48 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from gdi.uoregon.edu (cisco-ts17-line12.uoregon.edu [128.223.150.229]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id QAA15161 for ; Sat, 3 Jan 1998 16:48:42 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Received: from localhost (dwhite@localhost) by gdi.uoregon.edu (8.8.7/8.8.8) with SMTP id QAA27878; Sat, 3 Jan 1998 16:48:33 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Date: Sat, 3 Jan 1998 16:48:33 -0800 (PST) From: Doug White X-Sender: dwhite@localhost Reply-To: Doug White To: Gino RANAIVOARISOA cc: questions@FreeBSD.ORG Subject: Re: Is Etherlink III 3com 3c589d network card supported by freebsd 2.2.2 ? In-Reply-To: <2F0854FE.9AB@cnam.fr> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Mon, 2 Jan 1995, Gino RANAIVOARISOA wrote: > Happy new year dear colleague, > > I would like to know if this type of network card "3com 3c589d" is > supported by freebsd? Yes, in the zp driver. The `D' rev cards may or may not probe with that driver, though. It should work fine with the PAO distribution (http://www.jp.freebsd.org/PAO/). Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major From owner-freebsd-questions Sat Jan 3 16:54:04 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id QAA15542 for questions-outgoing; Sat, 3 Jan 1998 16:54:04 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from gdi.uoregon.edu (cisco-ts17-line12.uoregon.edu [128.223.150.229]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id QAA15537 for ; Sat, 3 Jan 1998 16:53:59 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Received: from localhost (dwhite@localhost) by gdi.uoregon.edu (8.8.7/8.8.8) with SMTP id QAA27886; Sat, 3 Jan 1998 16:53:44 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Date: Sat, 3 Jan 1998 16:53:43 -0800 (PST) From: Doug White X-Sender: dwhite@localhost Reply-To: Doug White To: James Higgins cc: freebsd-questions@FreeBSD.ORG Subject: Re: Panasonic CR-563 CD-ROM Drives. In-Reply-To: <34AC6579.2DF5C14@bnoc.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Thu, 1 Jan 1998, James Higgins wrote: > Doug White wrote: > > > > On Thu, 1 Jan 1998, James Higgins wrote: > > > > > Ok, > > > > > > I change the I/O address to 0x630. Windows 95 shows the device at 0x630 > > > and linux also detects the drive at 0x630. Kernel parameter in linux is > > > "sbpcd=0x630,LaserMate" if that means anything to anyone. Then I save > > > the userconfig parameters and continue booting. > > > > Did you set the interrupt? > > > > There is no way to specify an interrupt as far as I can tell. I don't know if the Panasonic interface supports interrupts, but you can specify it by adding `int x' to the device info line. controller matcd0 at isa? port 0x230 int 5 bio Usually the controller shares with the sound card. > > > The drive light flashes like the drive is read, but when I select it as > > > my installation media I get the now infamous "No CDROM devices found.... > > > blah blah blah" error. I can switch to virtual console 2 and see the > > > line: "DEBUG: Try at matcdc0 retruns errno 2". > > > > Hit scroll lock at the main install menu, then use the arrow keys to > > scroll back and see the boot prompt. See if matcd0 found anything. > It does not detect a drive while installing or if I compile a kernel > with the following line in the configuration. > > controller matcd0 at isa ? port 0x630 bio Hm. I wonder if this drive isn't-quite-matcd compatible. I had a TEAC 4x CD that used the Panasonic interface but a proprietary communication language, so matcd would blink the light but wouldn't find it. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major From owner-freebsd-questions Sat Jan 3 16:55:46 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id QAA15671 for questions-outgoing; Sat, 3 Jan 1998 16:55:46 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from gdi.uoregon.edu (cisco-ts17-line12.uoregon.edu [128.223.150.229]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id QAA15666 for ; Sat, 3 Jan 1998 16:55:42 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Received: from localhost (dwhite@localhost) by gdi.uoregon.edu (8.8.7/8.8.8) with SMTP id QAA27894; Sat, 3 Jan 1998 16:55:30 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Date: Sat, 3 Jan 1998 16:55:30 -0800 (PST) From: Doug White X-Sender: dwhite@localhost Reply-To: Doug White To: Charlie Roots cc: freebsd-questions@FreeBSD.ORG Subject: Re: What is a 'passwd.pag' file ? In-Reply-To: <98010200351400.06668@isis> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Fri, 2 Jan 1998, Charlie Roots wrote: > Hi there; > I got by a file called passwd.pag, does any one know what > this this file doing ?? Where was it? This isn't a standard part of the system. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major From owner-freebsd-questions Sat Jan 3 16:58:13 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id QAA15832 for questions-outgoing; Sat, 3 Jan 1998 16:58:13 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from gdi.uoregon.edu (cisco-ts17-line12.uoregon.edu [128.223.150.229]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id QAA15825 for ; Sat, 3 Jan 1998 16:58:09 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Received: from localhost (dwhite@localhost) by gdi.uoregon.edu (8.8.7/8.8.8) with SMTP id QAA27901; Sat, 3 Jan 1998 16:58:01 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Date: Sat, 3 Jan 1998 16:58:01 -0800 (PST) From: Doug White X-Sender: dwhite@localhost Reply-To: Doug White To: Mark Turrin cc: freebsd-questions@FreeBSD.ORG Subject: Re: Tape Backups In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Thu, 1 Jan 1998, Mark Turrin wrote: > Hello Doug, > > I want to thank you for the suggestion and report back on my successes. > Apparently it did want the f option as it would not work when I removed > it. Here is the script command that worked: > > /sbin/rdump 0cfua slugo:/dev/rmt0.1 /dev/sd0a # / Duh. You must have the f option; it specifies the destination device. > Now is it correct that I could replace ``/dev/sd0a'' with the ``/'' (the > real mount point of the partition) and it will still work? Don't bet on it. I don't know if dump knows to resolve filesystems using /etc/fstab or not. > > > rdump -0cfus slugo:/dev/rmt0.1 2200000 /dev/sd0s1e # /home > > > rdump -0cfus slugo:/dev/rmt0.1 2200000 /dev/sd0s1g # /usr > > > rdump -0cfus slugo:/dev/rmt0.1 2200000 /dev/sd0s1h # /var > > > > Oops, no dash. > > Oh OK. Gee that's what I love about Unix. All commands use dashes except > one. gotta love it. :-P If you didn't group them it would probably be OK. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major From owner-freebsd-questions Sat Jan 3 17:01:03 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id RAA16086 for questions-outgoing; Sat, 3 Jan 1998 17:01:03 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from gdi.uoregon.edu (cisco-ts17-line12.uoregon.edu [128.223.150.229]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id RAA16080 for ; Sat, 3 Jan 1998 17:00:58 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Received: from localhost (dwhite@localhost) by gdi.uoregon.edu (8.8.7/8.8.8) with SMTP id RAA27921; Sat, 3 Jan 1998 17:00:52 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Date: Sat, 3 Jan 1998 17:00:52 -0800 (PST) From: Doug White X-Sender: dwhite@localhost Reply-To: Doug White To: Skip Hansen cc: freebsd-questions@FreeBSD.ORG Subject: Re: xfree86 3.3.1 & FreeBSD 2.2.5 & Mach32 sync problem In-Reply-To: <199801021637.IAA03079@italy.it.earthlink.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Fri, 2 Jan 1998, Skip Hansen wrote: > I've been using FreeBSD and Xfree86 with the Mach32 X server for > several years without problem. Recently I upgraded from FreeBSD > 2.1.6 to 2.2.5 with Xfree 3.3.1 and I'm now having a minor problem > that's driving me crazy. The problem is that when I exit X (or > switch to a text mode virtual console) my monitor loses horizontal > sync. Using vidcontrol to reset the console mode does not restore > sync. The only thing that will get the monitor to sync again is a > complete system restart. The generic VGA256 server does not have > this problem. Then the new X server isn't restoring a consistent video mode on exit. Try getting it to enter the command `vidcontrol VGA_80x25' either using a script or blind-typing it. This has syscons change the video mode, and hopefully it'll restore the mode to a consistent state. This problem should be reported to the XFree86 developers. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major From owner-freebsd-questions Sat Jan 3 17:03:38 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id RAA16246 for questions-outgoing; Sat, 3 Jan 1998 17:03:38 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from zerium.newmedia.no (root@[194.198.117.66]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id RAA16236; Sat, 3 Jan 1998 17:03:15 -0800 (PST) (envelope-from hanspb@persbraten.vgs.no) Received: from localhost (hanspbie@localhost [127.0.0.1]) by zerium.newmedia.no (8.8.8/8.8.7) with SMTP id CAA01433; Sun, 4 Jan 1998 02:02:52 +0100 (CET) Date: Sun, 4 Jan 1998 02:02:51 +0100 (CET) From: Hans Petter Bieker X-Sender: hanspbie@zerium.newmedia.no To: FreeBSD Hackers cc: questions@FreeBSD.ORG Subject: Re: Why dump to /var?? In-Reply-To: <19980104102759.11459@lemis.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Sun, 4 Jan 1998, Greg Lehey wrote: > > not enough free space? On which device? in my /var/crash directory? > Presumably, unless you've changed /etc/rc. Doesn't savecore know which partition it should dump to? if not -- how does it can it find out if the partition is full without trying to write? $ mkdir /tmp/c /: write failed, file system is full mkdir: c: No space left on device is it possible to do something similar here? Or is this msg generated by the kernel? -bieker From owner-freebsd-questions Sat Jan 3 17:09:16 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id RAA16560 for questions-outgoing; Sat, 3 Jan 1998 17:09:16 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from gdi.uoregon.edu (cisco-ts17-line12.uoregon.edu [128.223.150.229]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id RAA16555 for ; Sat, 3 Jan 1998 17:09:12 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Received: from localhost (dwhite@localhost) by gdi.uoregon.edu (8.8.7/8.8.8) with SMTP id RAA27932; Sat, 3 Jan 1998 17:09:03 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Date: Sat, 3 Jan 1998 17:09:02 -0800 (PST) From: Doug White X-Sender: dwhite@localhost Reply-To: Doug White To: vinny omoyi cc: freebsd-questions@FreeBSD.ORG Subject: Re: FreeBSD In-Reply-To: <34AD00A0.F48BAC97@webspan.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Fri, 2 Jan 1998, vinny omoyi wrote: > I have a site at http://www.webspan.net/~vincent/ and I was > wondering how I can use Free BSD and in what ways that would help me on > my site. For the 2nd time I have read your page to try and see how I can > use it but for some reason am not clicking it. Please help. I checked > out most of the examples of pages that are of satisfied Free BSD users. FreeBSD is an operating system. It's what you would run on your web server instead of whatever www.webspan.net is running now. I doubt they'd let you do that. However, if you want to set up your own server on your PC, then FreeBSD is what you want. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major From owner-freebsd-questions Sat Jan 3 17:14:02 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id RAA16838 for questions-outgoing; Sat, 3 Jan 1998 17:14:02 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from gdi.uoregon.edu (cisco-ts17-line12.uoregon.edu [128.223.150.229]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id RAA16829 for ; Sat, 3 Jan 1998 17:13:55 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Received: from localhost (dwhite@localhost) by gdi.uoregon.edu (8.8.7/8.8.8) with SMTP id RAA27939; Sat, 3 Jan 1998 17:13:48 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Date: Sat, 3 Jan 1998 17:13:48 -0800 (PST) From: Doug White X-Sender: dwhite@localhost Reply-To: Doug White To: David Turner cc: "'questions@freeBSD.ORG'" Subject: Re: apache In-Reply-To: <01BD1784.9AF4D360@flashpoint.blast.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Fri, 2 Jan 1998, David Turner wrote: > I am having a problem with a webserver running freebsd 2.2.2 with > apache. The problem is when you request a webpage from the internet the > graphics are not loading and the page does not finish loading. The > server has been fine for months. The pages come up fine when I request > them from a computer on our ethernet of dial into one of our POPS > however if I dial in from an outside source (webspan or AOL for example) > I run into this problem. These types of problems can be caused by network lag, a bad piece of network hardware between you and the destination site, or action by the user to disable image loading on their browser. I tried your pages and some of them load OK. Try disabling tcp extensions in /etc/rc.conf. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major From owner-freebsd-questions Sat Jan 3 17:17:47 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id RAA17041 for questions-outgoing; Sat, 3 Jan 1998 17:17:47 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from gdi.uoregon.edu (cisco-ts17-line12.uoregon.edu [128.223.150.229]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id RAA17036 for ; Sat, 3 Jan 1998 17:17:43 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Received: from localhost (dwhite@localhost) by gdi.uoregon.edu (8.8.7/8.8.8) with SMTP id RAA27946; Sat, 3 Jan 1998 17:17:33 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Date: Sat, 3 Jan 1998 17:17:33 -0800 (PST) From: Doug White X-Sender: dwhite@localhost Reply-To: Doug White To: Paul Dekkers cc: freebsd-questions@FreeBSD.ORG Subject: Re: NIS/YP In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Fri, 2 Jan 1998, Paul Dekkers wrote: > I couldn't find a page in the handbook as a guide while setting up NIS: is > there any documentation/howto for that? man yp > And: how do I set up a master.passwd, because when exchanging the file > with other hosts it might be difficult I think: in my master.passwd e.g. > are long passwords (MD5 passwords) and when using those on a Linux box as > NIS client or another FreeBSD host as NIS client without MD5 it might be > difficult: can I also put in non-md5's in there (and how to) or isn't this > such a big problem as I expect it to be...?! (can it safely be combined > with erm... crypt/des passwords? (the same huh) (how do I post-install > that eventually) If you will be exchanging passwords with other systems, you must use DES. Install the des libs from ftp.internat.freebsd.org. After installing DES everyone will have to change their passwords so the MD5 passwords are removed. You can automate this by setting the expire time to 1. The next time they login, they'll be forced to change their password. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major From owner-freebsd-questions Sat Jan 3 17:19:45 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id RAA17173 for questions-outgoing; Sat, 3 Jan 1998 17:19:45 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from allegro.lemis.com (allegro.lemis.com [192.109.197.134]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id RAA17166 for ; Sat, 3 Jan 1998 17:19:38 -0800 (PST) (envelope-from grog@lemis.com) Received: from freebie.lemis.com (freebie.lemis.com [192.109.197.137]) by allegro.lemis.com (8.8.7/8.8.5) with ESMTP id LAA20676; Sun, 4 Jan 1998 11:49:34 +1030 (CST) Received: (from grog@localhost) by freebie.lemis.com (8.8.8/8.8.7) id LAA07417; Sun, 4 Jan 1998 11:49:34 +1030 (CST) (envelope-from grog) Message-ID: <19980104114934.60892@lemis.com> Date: Sun, 4 Jan 1998 11:49:34 +1030 From: Greg Lehey To: Tim Jokela Cc: questions@FreeBSD.ORG Subject: Re: Do you support spam? Re: "Invitation to list your Web Site" References: <199801040000.TAA29239@snel.execulink.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.84e In-Reply-To: <199801040000.TAA29239@snel.execulink.com>; from Tim Jokela on Sat, Jan 03, 1998 at 07:00:19PM -0500 Organisation: LEMIS, PO Box 460, Echunga SA 5153, Australia Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-41-739-7062 WWW-Home-Page: http://www.lemis.com/~grog Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Sat, Jan 03, 1998 at 07:00:19PM -0500, Tim Jokela wrote: > I notice that you advertise at the website responsible for sending me the > spam quoted below, > . > > I hope that you do not support spam. Please inform whoever is in charge at > aaex.com that spamming is contrary to honest Internet business > practices. The FreeBSD project is strongly opposed to spam. We expend a lot of effort to limit it. It's also not clear that the FreeBSD project is "advertising" on this web page. We ask people who use FreeBSD to display a FreeBSD logo, including the one that you see at the bottom of this page. The page designer has chosen to make it a link to www.FreeBSD.org, which makes sense. IMO none of this has required any action on the part of the FreeBSD project. It's a sad fact of life that even predatory net users can use FreeBSD. It would be contrary to the FreeBSD mission to try to stop them. Greg >> Received: from x-mail.net ([207.112.236.164]) >> by snel.execulink.com (8.8.7/8.8.7) with SMTP id QAA00894 >> for ; Sat, 3 Jan 1998 16:46:21 -0500 (EST) >> From: admin@infobase-intl.com >> Received: from [206.12.96.77] by x-mail.net (NX5.67g/NX3.0M) >> id AA10853; Sat, 3 Jan 98 13:46:24 -0800 >> Date: Sat, 3 Jan 98 13:46:24 -0800 >> Message-Id: <9801032146.AA10853@x-mail.net > >> To: tjokela@execulink.com >> Subject: Invitation to list your Web Site >> X-UIDL: c2e144eb4e804b1aaaf44a30bd8ca560 >> >> Hello.... >> >> We invite you to list your Web Site free of charge in our new Internet > Directory located at: >> >> http://www.infobase-intl.com Another observation: there are various levels of spam. I once had a spammer use my system to relay spam, trying to make it look like it came from my site. I consider that the worst, a criminal offence. Next are those who spam mailing lists with unrelated, often obsecene or illegal propositions. After that are those who spam individuals with unrelated, often obsecene or illegal propositions. Finally, there are those who spam individuals with propositions which they think may be of interest. I'd certainly think that this one falls into this category. OK, it's spam, but it's less obnoxious than most. Greg From owner-freebsd-questions Sat Jan 3 17:23:29 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id RAA17514 for questions-outgoing; Sat, 3 Jan 1998 17:23:29 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from allegro.lemis.com (allegro.lemis.com [192.109.197.134]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id RAA17500 for ; Sat, 3 Jan 1998 17:23:22 -0800 (PST) (envelope-from grog@lemis.com) Received: from freebie.lemis.com (freebie.lemis.com [192.109.197.137]) by allegro.lemis.com (8.8.7/8.8.5) with ESMTP id LAA20683; Sun, 4 Jan 1998 11:53:09 +1030 (CST) Received: (from grog@localhost) by freebie.lemis.com (8.8.8/8.8.7) id LAA07438; Sun, 4 Jan 1998 11:53:08 +1030 (CST) (envelope-from grog) Message-ID: <19980104115308.21618@lemis.com> Date: Sun, 4 Jan 1998 11:53:08 +1030 From: Greg Lehey To: Hans Petter Bieker Cc: FreeBSD Questions Subject: Re: Why dump to /var?? References: <19980104102759.11459@lemis.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.84e In-Reply-To: ; from Hans Petter Bieker on Sun, Jan 04, 1998 at 02:02:51AM +0100 Organisation: LEMIS, PO Box 460, Echunga SA 5153, Australia Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-41-739-7062 WWW-Home-Page: http://www.lemis.com/~grog Sender: owner-freebsd-questions@FreeBSD.org X-Loop: FreeBSD.org Precedence: bulk On Sun, Jan 04, 1998 at 02:02:51AM +0100, Hans Petter Bieker wrote: > On Sun, 4 Jan 1998, Greg Lehey wrote: >>> not enough free space? On which device? in my /var/crash directory? >> Presumably, unless you've changed /etc/rc. > > Doesn't savecore know which partition it should dump to? if not -- how > does it can it find out if the partition is full without trying to write? It takes the directory name as a parameter. Take a look in /etc/rc. > $ mkdir /tmp/c > /: write failed, file system is full > mkdir: c: No space left on device Boy, that *is* full. Not even space for a directory block. > is it possible to do something similar here? Or is this msg generated by > the kernel? The high-intensity messages are generated by the kernel. But what do you mean "something similar"? Do you mean, can you put your /tmp file system elsewhere? Yes, you can. Just do this: # mkdir /home/tmp # mv /tmp /TMP # ln -s /home/tmp /tmp At some later time, when you're sure you don't need anything in /TMP, you can remove it and its contents. Greg From owner-freebsd-questions Sat Jan 3 17:24:05 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id RAA17660 for questions-outgoing; Sat, 3 Jan 1998 17:24:05 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from gdi.uoregon.edu (cisco-ts17-line12.uoregon.edu [128.223.150.229]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id RAA17600 for ; Sat, 3 Jan 1998 17:23:59 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Received: from localhost (dwhite@localhost) by gdi.uoregon.edu (8.8.7/8.8.8) with SMTP id RAA27953; Sat, 3 Jan 1998 17:23:52 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Date: Sat, 3 Jan 1998 17:23:51 -0800 (PST) From: Doug White X-Sender: dwhite@localhost Reply-To: Doug White To: Paul Dekkers cc: freebsd-questions@FreeBSD.ORG Subject: Re: update or not? In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Fri, 2 Jan 1998, Paul Dekkers wrote: > I currently run FreeBSD 2.2.1 on a mashine that's used as a multi-user > system and I'm planning to setup a new mashine that doesn't let users log > in but let it play web-server or mail-server or smth like that... > I'm planning to put FreeBSD 2.2.1 on that server, but is that a good idea? > I'm just doing it because I have that version on CD and I don't have newer > versions... (although I can buy them) - Is the new version really that > changed (security holes or in any other aspect (which? speed?) that I'd > immediately buy the new version? As always, there are changes and updates to the system. The main problem with staying on 2.2.1 is that it'll be difficult to update the system with new additions and fixes since you're running on a code base two releases old. 2.2.5 is a fairly significant update, though, adding login capabilites, rc.conf, and others. Since this is a play box, I suggest going for 2.2.5. This way, you're ahead of system changes and have some movement to experiment / learn about new system features without distrupting your existing operations. 2.2.5 has been working great for me, but I do need to add some patches to fix some stuff. > If I'd upgrade the multi-user system, can I do that without any > pain? What can I do to let it go nice and so on...?! It's the usual upgrade procedure, except you have to rewrite sysconfig into rc.conf. It's quite easy if you're familiar with sysconfig. > P.S. Or is it worth setting up for my home-system: is the awe 32 pnp > supported? (including midi-player and so on?) (in that case it would be > of interest ;-)) You'll need the new sound driver. See the multimedia mail archives or contact the list directly at multimedia@freebsd.org. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major From owner-freebsd-questions Sat Jan 3 17:29:55 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id RAA17927 for questions-outgoing; Sat, 3 Jan 1998 17:29:55 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from allegro.lemis.com (allegro.lemis.com [192.109.197.134]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id RAA17917 for ; Sat, 3 Jan 1998 17:29:33 -0800 (PST) (envelope-from grog@lemis.com) Received: from freebie.lemis.com (freebie.lemis.com [192.109.197.137]) by allegro.lemis.com (8.8.7/8.8.5) with ESMTP id LAA20690; Sun, 4 Jan 1998 11:59:01 +1030 (CST) Received: (from grog@localhost) by freebie.lemis.com (8.8.8/8.8.7) id LAA07466; Sun, 4 Jan 1998 11:59:00 +1030 (CST) (envelope-from grog) Message-ID: <19980104115900.07094@lemis.com> Date: Sun, 4 Jan 1998 11:59:00 +1030 From: Greg Lehey To: Doug White Cc: vinny omoyi , freebsd-questions@FreeBSD.ORG Subject: Re: FreeBSD References: <34AD00A0.F48BAC97@webspan.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.84e In-Reply-To: ; from Doug White on Sat, Jan 03, 1998 at 05:09:02PM -0800 Organisation: LEMIS, PO Box 460, Echunga SA 5153, Australia Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-41-739-7062 WWW-Home-Page: http://www.lemis.com/~grog Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Sat, Jan 03, 1998 at 05:09:02PM -0800, Doug White wrote: > On Fri, 2 Jan 1998, vinny omoyi wrote: > >> I have a site at http://www.webspan.net/~vincent/ and I was >> wondering how I can use Free BSD and in what ways that would help me on >> my site. For the 2nd time I have read your page to try and see how I can >> use it but for some reason am not clicking it. Please help. I checked >> out most of the examples of pages that are of satisfied Free BSD users. > > FreeBSD is an operating system. It's what you would run on your web > server instead of whatever www.webspan.net is running now. I doubt they'd > let you do that. I don't think they'd have a problem :-) $ nslookup Default Server: localhost.lemis.com Address: 127.0.0.1 > set type=hinfo > www.webspan.net Server: localhost.lemis.com Address: 127.0.0.1 Non-authoritative answer: www.webspan.net canonical name = orion.webspan.net orion.webspan.net CPU = P5-166 OS = FreeBSD-2.1.7-RELEASE > However, if you want to set up your own server on your PC, then > FreeBSD is what you want. And your friends at webspan will be able to understand what you're talking about :-) Under the circumstances, it looks like Doug and I have misunderstood your question. If so, could you restate it, please? Greg From owner-freebsd-questions Sat Jan 3 17:32:57 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id RAA18141 for questions-outgoing; Sat, 3 Jan 1998 17:32:57 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from gdi.uoregon.edu (cisco-ts17-line12.uoregon.edu [128.223.150.229]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id RAA18136 for ; Sat, 3 Jan 1998 17:32:51 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Received: from localhost (dwhite@localhost) by gdi.uoregon.edu (8.8.7/8.8.8) with SMTP id RAA27963; Sat, 3 Jan 1998 17:32:42 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Date: Sat, 3 Jan 1998 17:32:41 -0800 (PST) From: Doug White X-Sender: dwhite@localhost Reply-To: Doug White To: Bob Miller cc: freebsd-questions@FreeBSD.ORG Subject: Re: ppp In-Reply-To: <34AEB3BC.D11D6D4B@rochgrp.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Argh, please rewire Netscrape Communicator to not send HTML. On Sat, 3 Jan 1998, Bob Miller wrote: Hi. Is this the right place for this question? I'm using ppp to dial up my network at work (13.*). I now want to make an additional connection to the internet via IBM's internet service. I've got the second connection dialed up, so netstat shows: rmill@gwozmilla> netstat -nr Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire default 13.231.66.8 UGSc 5 1438 tun0 13.231.66.8 13.231.66.10 UH 5 0 tun0 13.231.66.10 127.0.0.1 UH 0 0 lo0 127.0.0.1 127.0.0.1 UH 1 764 lo0 127.1.1.1 127.0.0.1 UH 0 0 lo0 127.2.2.2 127.1.1.1 UH 0 0 tun0 166.72.87.229 127.0.0.1 UH 0 0 lo0 192.168.76/23 link#1 UC 0 0 192.168.77.5 0:60:97:8f:2d:b0 UHLW 5 4915 ed1 1099 204.146.253.145 166.72.87.229 UH 0 0 tun1 ... but when I ping 204.146.253.145, I see the modem send light blinking but don't receive anything. Can you suggest other things to try (or direct me to the right place to ask the question)? Thanks. I don't understand how your network is set up. Let me get this straight: ---+-------------- [ Internet ] ----------------------+-------- | | | | [WORK] [IBM] 13.*.*.* ????????? | +------------------------------+ | | | [ HOME MACHINE ] | | +-----------|-ppp/tun0 ppp/tun1-|-------| | ethernet/ed1 | +-------------|----------------+ | ------------------[ local network ]--------------------- This is nuts. If I have the case right, save money and dump IBM. I suspect, though, that your worknet isn't connected to the Internet. In that case, you need to tweak your routing so that worknet traffic goes over the link, local net traffic out the Ethernet card, and the rest out the IBM link. You'll need to know the netmasks for the worknet and local Ethernet. Let me know if I'm totally off base... Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major From owner-freebsd-questions Sat Jan 3 17:35:25 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id RAA18426 for questions-outgoing; Sat, 3 Jan 1998 17:35:25 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from gdi.uoregon.edu (cisco-ts17-line12.uoregon.edu [128.223.150.229]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id RAA18419 for ; Sat, 3 Jan 1998 17:35:21 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Received: from localhost (dwhite@localhost) by gdi.uoregon.edu (8.8.7/8.8.8) with SMTP id RAA27971; Sat, 3 Jan 1998 17:35:02 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Date: Sat, 3 Jan 1998 17:35:02 -0800 (PST) From: Doug White X-Sender: dwhite@localhost Reply-To: Doug White To: "David E. Cross" cc: freebsd-questions@FreeBSD.ORG Subject: Re: release images question? In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Sat, 3 Jan 1998, David E. Cross wrote: > what is the make(1) command to build the release images (boot.flp, > fixit.flp, bin.aa, bin.ab, ..., etc)? This process involves checking out and rebuilding the entire release structure. You must have the CVS tree available to check out the release from and enough disk space to build the entire system and archive up the release packages. See http://www.freebsd.org/cgi/cvsweb.cgi/src/release/Makefile to start. You will also need to set up cvsup. Any reason you need to do this? Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major From owner-freebsd-questions Sat Jan 3 17:53:17 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id RAA19308 for questions-outgoing; Sat, 3 Jan 1998 17:53:17 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from gdi.uoregon.edu (cisco-ts17-line12.uoregon.edu [128.223.150.229]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id RAA19303 for ; Sat, 3 Jan 1998 17:53:13 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Received: from localhost (dwhite@localhost) by gdi.uoregon.edu (8.8.7/8.8.8) with SMTP id RAA28023; Sat, 3 Jan 1998 17:52:58 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Date: Sat, 3 Jan 1998 17:52:57 -0800 (PST) From: Doug White X-Sender: dwhite@localhost Reply-To: Doug White To: Norman C Rice cc: freebsd-questions@FreeBSD.ORG Subject: Re: UPSD toggle wraparound and negative response In-Reply-To: <19980103115603.07099@emu.sourcee.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Sat, 3 Jan 1998, Norman C Rice wrote: > I am running the experimental upsd port on several FreeBSD 2.2.5-STABLE > systems with APC Smart-UPS 1000s. Every 10 minutes /var/log/messages > receives entries similar to > > Jan 3 11:17:38 emu upsd[231]: apc_tune: toggle wraparound > Jan 3 11:17:39 emu upsd[231]: apc_tune: toggle wraparound > Jan 3 11:17:39 emu upsd[231]: apc_tune: negative response: NO > Jan 3 11:17:40 emu upsd[231]: apc_tune: toggle wraparound > Warning: the default upsd is wired for use on 240 volt UPS units. The voltage-dependent values will *NOT* work for 120 volt units. These lines are probably causing your problem: > tune "high-transfer-point" 264 > tune "low-transfer-point" 196 > tune "nominal-voltage" 220 You will need my modified version of upsd that is set up with values for 120 volt operation. That or remove these lines and use the built-in defaults for the UPS (or toggle the rear switches to your taste). > My experiments with removal of line power indicate that the shutdown > process and line restoration work properly. For the time being, I > have commented out these messages in apc.c. The negative response may be coming from a command like so: poll "last-test" This checks the results of the last self-test of the UPS. If you aren't running self tests, it'll report NO until one is run either manually or automatically as programmed into the UPS. I thought the line was annoying to and just didn't have upsd check that (or else I removed the printf :-)) Beginning Monday you can fetch this from: ftp://gdi.uoregon.edu/pub/upsd-2.0.1.6.1.tgz See the README for quick info and examples/upsd.conf.120v for starters. If you want to get fancy with tuning the transfer points and such, you'll have to fish the values out of apc_static.c. I actually have a manpage in there, but it isn't installed by default. Hope this helps. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major From owner-freebsd-questions Sat Jan 3 17:57:46 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id RAA19545 for questions-outgoing; Sat, 3 Jan 1998 17:57:46 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from gdi.uoregon.edu (cisco-ts17-line12.uoregon.edu [128.223.150.229]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id RAA19538 for ; Sat, 3 Jan 1998 17:57:42 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Received: from localhost (dwhite@localhost) by gdi.uoregon.edu (8.8.7/8.8.8) with SMTP id RAA28030; Sat, 3 Jan 1998 17:57:34 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Date: Sat, 3 Jan 1998 17:57:34 -0800 (PST) From: Doug White X-Sender: dwhite@localhost Reply-To: Doug White To: Tommy Hallgren cc: freebsd-questions@FreeBSD.ORG Subject: Re: 2.2.1 to 2.2-stable In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Sat, 3 Jan 1998, Tommy Hallgren wrote: > Can anyone tell me if it is faster to install 2.2.1 sources and cvsup to > 2.2-stable or to clean /usr/src and then cvsup to 2.2-stable? Option #1 by far. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major From owner-freebsd-questions Sat Jan 3 18:02:57 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id SAA19937 for questions-outgoing; Sat, 3 Jan 1998 18:02:57 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from awfulhak.demon.co.uk (awfulhak.demon.co.uk [158.152.17.1]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id SAA19921 for ; Sat, 3 Jan 1998 18:02:50 -0800 (PST) (envelope-from brian@awfulhak.org) Received: from gate.lan.awfulhak.org (localhost [127.0.0.1]) by awfulhak.demon.co.uk (8.8.7/8.8.7) with ESMTP id AAA18049; Sun, 4 Jan 1998 00:28:34 GMT (envelope-from brian@gate.lan.awfulhak.org) Message-Id: <199801040028.AAA18049@awfulhak.demon.co.uk> X-Mailer: exmh version 2.0.1 12/23/97 To: Doug Jolley cc: questions@freebsd.org Subject: Re: PPP In-reply-to: Your message of "Sat, 03 Jan 1998 13:07:54 PST." <199801032107.NAA19710@jupiter.neptune.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Sun, 04 Jan 1998 00:28:34 +0000 From: Brian Somers Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk > Could someone please give me an overview of what I need to > do to connect my FreeBSD box via PPP to my ISP. I alrady > have networking/tcpip setup. Thanks for any input. Go to http://www.Awfulhak.org/ppp.html and start reading :-) Connecting to an ISP is described in great detail. > ... doug > _____________________________________________________________________ > Doug Jolley mailto://doug@bigwheel.net http://www.bigwheel.net > Don't bogart that file, my friend. Net it over to me. > --------------------------------------------------------------------- -- Brian , , Don't _EVER_ lose your sense of humour.... From owner-freebsd-questions Sat Jan 3 18:03:13 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id SAA19977 for questions-outgoing; Sat, 3 Jan 1998 18:03:13 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from awfulhak.demon.co.uk (awfulhak.demon.co.uk [158.152.17.1]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id SAA19968 for ; Sat, 3 Jan 1998 18:03:07 -0800 (PST) (envelope-from brian@awfulhak.org) Received: from gate.lan.awfulhak.org (localhost [127.0.0.1]) by awfulhak.demon.co.uk (8.8.7/8.8.7) with ESMTP id AAA18107; Sun, 4 Jan 1998 00:42:40 GMT (envelope-from brian@gate.lan.awfulhak.org) Message-Id: <199801040042.AAA18107@awfulhak.demon.co.uk> X-Mailer: exmh version 2.0.1 12/23/97 To: Bob Miller cc: freebsd-questions@freebsd.org Subject: Re: ppp In-reply-to: Your message of "Sat, 03 Jan 1998 16:55:08 EST." <34AEB3BC.D11D6D4B@rochgrp.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Sun, 04 Jan 1998 00:42:40 +0000 From: Brian Somers Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk > Hi. Is this the right place for this question? I'm using ppp to > dial up my network at work (13.*). I now want to make an > additional connection to the internet via IBM's internet service. > I've got the second connection dialed up, so netstat shows: > > rmill@gwozmilla> netstat -nr > Routing tables > > Internet: > Destination Gateway Flags Refs Use > Netif Expire > default 13.231.66.8 UGSc 5 1438 > tun0 > 13.231.66.8 13.231.66.10 UH 5 0 > tun0 > 13.231.66.10 127.0.0.1 UH 0 > 0 lo0 > 127.0.0.1 127.0.0.1 UH 1 > 764 lo0 > 127.1.1.1 127.0.0.1 UH 0 > 0 lo0 > 127.2.2.2 127.1.1.1 UH 0 0 > tun0 > 166.72.87.229 127.0.0.1 UH 0 > 0 lo0 > 192.168.76/23 link#1 UC 0 0 > 192.168.77.5 0:60:97:8f:2d:b0 UHLW 5 > 4915 ed1 1099 > 204.146.253.145 166.72.87.229 UH 0 0 > tun1 > > ... but when I ping 204.146.253.145, I see the modem send light > blinking but don't receive anything. Can you suggest other things > to try (or direct me to the right place to ask the > question)? Thanks. [.....] You shouldn't have the default route via your tun0 interface. Remove the "add 0 0 hisaddr" bit for that connection. If that's how to get to the 13.* network, use "add 13.0 255.0 hisaddr". -- Brian , , Don't _EVER_ lose your sense of humour.... From owner-freebsd-questions Sat Jan 3 18:08:50 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id SAA20435 for questions-outgoing; Sat, 3 Jan 1998 18:08:50 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from gdi.uoregon.edu (cisco-ts17-line12.uoregon.edu [128.223.150.229]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id SAA20422 for ; Sat, 3 Jan 1998 18:08:45 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Received: from localhost (dwhite@localhost) by gdi.uoregon.edu (8.8.7/8.8.8) with SMTP id SAA28041; Sat, 3 Jan 1998 18:08:23 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Date: Sat, 3 Jan 1998 18:08:22 -0800 (PST) From: Doug White X-Sender: dwhite@localhost Reply-To: Doug White To: gsutter@pobox.com cc: "Joe \"Marcus\" Clarke" , FreeBSD User Questions List Subject: Re: tclsh In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk On Thu, 1 Jan 1998 gsutter@pobox.com wrote: > On Thu, 1 Jan 1998, Doug White wrote: > > >On Thu, 1 Jan 1998, Joe "Marcus" Clarke wrote: > > > >> I just installed 2.2.5-RELEASE from scratch, and things went flawlessly. > >> I did it via ftp using a modem...not bad guys! Anyway, after a lot of > >> configuring and tweaking, I finally needed to run the addgroup command. > >> Much to my surprise, it didn't work. Turns out, /usr/bin/tclsh didn't > >> exist. I KNOW I didn't delete it. NEVER touch anything in /usr/bin. > > > >That's confirmed; the 2.2.5 bin distribution doesn't have tclsh, but the > >2.2.2 one does. I'll submit a bug report. > > I submitted this as misc/4938 on 11/04/97; it is still open. Huh, they closed mine immediately. Tell them to close it and refer to bin/5405. Looks like I need to sign on to the bugs system and clean out the chaff. misc/3586 is the classic `downloaded boot.flp in ASCII mode' newbie screwup. And it's critical priority! :-( Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major From owner-freebsd-questions Sat Jan 3 18:10:50 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id SAA20658 for questions-outgoing; Sat, 3 Jan 1998 18:10:50 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from gdi.uoregon.edu (cisco-ts17-line12.uoregon.edu [128.223.150.229]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id SAA20651 for ; Sat, 3 Jan 1998 18:10:45 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Received: from localhost (dwhite@localhost) by gdi.uoregon.edu (8.8.7/8.8.8) with SMTP id SAA28050; Sat, 3 Jan 1998 18:10:36 -0800 (PST) (envelope-from dwhite@gdi.uoregon.edu) Date: Sat, 3 Jan 1998 18:10:36 -0800 (PST) From: Doug White X-Sender: dwhite@localhost Reply-To: Doug White To: Charlie Roots cc: freebsd-questions@FreeBSD.ORG Subject: Re: Where can I get 'boot.flp' for freebsd-current In-Reply-To: <98010201100701.06668@isis> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Fri, 2 Jan 1998, Charlie Roots wrote: > I intend to buy a new 6 GB drive, and since I upgraded from 2.2.2-RELEASE > to 3.0-Current over CVSUP, I can't install the system from the system > without having a bootable floppy, so is there a URL for the boot.flp, > or I will have to install 2.2.2 then upgrade via cvsup. more /usr/src/release/Makefile cd /usr/src/release make release Also try ftp://current.freebsd.org/ for the build of the day. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major From owner-freebsd-questions Sat Jan 3 18:12:00 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id SAA20794 for questions-outgoing; Sat, 3 Jan 1998 18:12:00 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from emu.sourcee.com (emu.sourcee.com [199.201.159.173]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id SAA20768 for ; Sat, 3 Jan 1998 18:11:54 -0800 (PST) (envelope-from nrice@emu.sourcee.com) Received: (from nrice@localhost) by emu.sourcee.com (8.8.8/8.8.3) id VAA01742; Sat, 3 Jan 1998 21:11:40 -0500 (EST) Message-ID: <19980103211140.23710@emu.sourcee.com> Date: Sat, 3 Jan 1998 21:11:40 -0500 From: Norman C Rice To: Doug White Cc: freebsd-questions@FreeBSD.ORG Subject: Re: UPSD toggle wraparound and negative response References: <19980103115603.07099@emu.sourcee.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.88 In-Reply-To: ; from Doug White on Sat, Jan 03, 1998 at 05:52:57PM -0800 Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Sat, Jan 03, 1998 at 05:52:57PM -0800, Doug White wrote: > On Sat, 3 Jan 1998, Norman C Rice wrote: > > > I am running the experimental upsd port on several FreeBSD 2.2.5-STABLE > > systems with APC Smart-UPS 1000s. Every 10 minutes /var/log/messages > > receives entries similar to > > > > Jan 3 11:17:38 emu upsd[231]: apc_tune: toggle wraparound > > Jan 3 11:17:39 emu upsd[231]: apc_tune: toggle wraparound > > Jan 3 11:17:39 emu upsd[231]: apc_tune: negative response: NO > > Jan 3 11:17:40 emu upsd[231]: apc_tune: toggle wraparound > > > > Warning: the default upsd is wired for use on 240 volt UPS units. The > voltage-dependent values will *NOT* work for 120 volt units. These lines > are probably causing your problem: > > > tune "high-transfer-point" 264 > > tune "low-transfer-point" 196 > > tune "nominal-voltage" 220 Yes. I noticed these values. It appears that these values are straight from `apc_static.c'. It appears that unless values (shutdown times, voltages, etc.) are within the data structures that they don't work in the configuration file. If this is true (I haven't looked real close at the code), perhaps a rewrite is on order. Are the APC Smart-UPS programming specifications freely available? > > You will need my modified version of upsd that is set up with values for > 120 volt operation. That or remove these lines and use the built-in > defaults for the UPS (or toggle the rear switches to your taste). > > > My experiments with removal of line power indicate that the shutdown > > process and line restoration work properly. For the time being, I > > have commented out these messages in apc.c. > > The negative response may be coming from a command like so: > > poll "last-test" > > This checks the results of the last self-test of the UPS. If you aren't > running self tests, it'll report NO until one is run either manually or > automatically as programmed into the UPS. I thought the line was annoying > to and just didn't have upsd check that (or else I removed the printf :-)) > > Beginning Monday you can fetch this from: > > ftp://gdi.uoregon.edu/pub/upsd-2.0.1.6.1.tgz > > See the README for quick info and examples/upsd.conf.120v for starters. > If you want to get fancy with tuning the transfer points and such, you'll > have to fish the values out of apc_static.c. I actually have a manpage in > there, but it isn't installed by default. Great, I hope your `README' and manual page takes a little more disk space than the corresponding ones in the experimental port. :-) > > Hope this helps. It sure does. > > Doug White | University of Oregon > Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant > http://gladstone.uoregon.edu/~dwhite | Computer Science Major > Thanks, Doug. I will download your efforts on Monday and report back. -- Regards, Norman C. Rice, Jr. From owner-freebsd-questions Sat Jan 3 18:22:25 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id SAA21418 for questions-outgoing; Sat, 3 Jan 1998 18:22:25 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from send1a.yahoomail.com (send1a.yahoomail.com [205.180.60.22]) by hub.freebsd.org (8.8.7/8.8.7) with SMTP id SAA21411 for ; Sat, 3 Jan 1998 18:22:20 -0800 (PST) (envelope-from rgireyev@yahoo.com) Message-ID: <19980104022155.24759.rocketmail@send1a.yahoomail.com> Received: from [206.175.205.204] by send1a; Sat, 03 Jan 1998 18:21:55 PST Date: Sat, 3 Jan 1998 18:21:55 -0800 (PST) From: Rudy Gireyev Subject: Re: PPP To: Mark Ibell , Doug Jolley Cc: freebsd-questions@FreeBSD.ORG MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk In addintion to the man pages there is a tutorial for this on www.freebsd.org under documentation Rudy ---Mark Ibell wrote: > > Doug Jolley wrote: > > > > Could someone please give me an overview of what I need to > > do to connect my FreeBSD box via PPP to my ISP. I alrady > > have networking/tcpip setup. Thanks for any input. > > > > ... doug > > _____________________________________________________________________ > > Doug Jolley mailto://doug@bigwheel.net http://www.bigwheel.net > > Don't bogart that file, my friend. Net it over to me. > > --------------------------------------------------------------------- > > First decide whether you want to use kernel or user ppp; started > via pppd or ppp respectively. Setup of both basically involves > editting files in '/etc/ppp'. But don't forget '/etc/resolv.conf'. > I feel kernel ppp is easier to set up but offers less flexibility > than user ppp. Reading the man pages pppd(8) and/or ppp(8) should > suffice. If you still have further questions don't hesitate to > ask. > > Go to it lad, > > Mark > _________________________________________________________ DO YOU YAHOO!? Get your free @yahoo.com address at http://mail.yahoo.com From owner-freebsd-questions Sat Jan 3 18:30:09 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id SAA21897 for questions-outgoing; Sat, 3 Jan 1998 18:30:09 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from send1a.yahoomail.com (send1a.yahoomail.com [205.180.60.22]) by hub.freebsd.org (8.8.7/8.8.7) with SMTP id SAA21854 for ; Sat, 3 Jan 1998 18:30:00 -0800 (PST) (envelope-from rgireyev@yahoo.com) Message-ID: <19980104022931.27128.rocketmail@send1a.yahoomail.com> Received: from [206.175.205.204] by send1a; Sat, 03 Jan 1998 18:29:31 PST Date: Sat, 3 Jan 1998 18:29:31 -0800 (PST) From: Rudy Gireyev Subject: Garbled text in handbook To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Downloaded ftp.freebsd.org/pub/FreeBSD/docs/handbook-ascii.gz yesterday. Did gunzip handbook-ascii.gz Then did view handbook-ascii There are a bunch of unprintable characters all over the file. Uttsa Mader Here!!! Rudy _________________________________________________________ DO YOU YAHOO!? Get your free @yahoo.com address at http://mail.yahoo.com From owner-freebsd-questions Sat Jan 3 18:39:54 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id SAA22368 for questions-outgoing; Sat, 3 Jan 1998 18:39:54 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from mole (mole.slip.net [207.171.193.16]) by hub.freebsd.org (8.8.7/8.8.7) with SMTP id SAA22363 for ; Sat, 3 Jan 1998 18:39:49 -0800 (PST) (envelope-from bsampley@slip.net) Received: from sf-pm17-39-103.dialup.slip.net [207.171.212.103] by mole with smtp (Exim 1.73 #2) id 0xofyL-0003e2-00; Sat, 3 Jan 1998 18:39:30 -0800 Date: Sat, 3 Jan 1998 18:38:14 -0800 (PST) From: Burton Sampley X-Sender: bsampley@bsampley.my.domain To: Tommy Hallgren cc: freebsd-questions@freebsd.org Subject: Re: 2.2.1 to 2.2-stable In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk -----BEGIN PGP SIGNED MESSAGE----- I think some people might disagree with my opinion, but I think the best course of action would be to cvsup to a clean /usr/src and make world. If you have built a custom kernel, make a backup copy of your conf file somewhere other than below /usr/src (I forgot when I did this, it's no big deal to make a copy of GENERIC and then tweak it to your own specks, it's just a pain if you forget). MAKE SURE YOU BACKUP /etc!!!! Also if you have done make world in the past make sure /usr/obj is clean. Some files/dirs require a little 'gentle persuasion' to rm. You might have to execute the following command to truly make sure /usr/obj is clean: csh# chflags -R noschg /usr/obj/; rm -rf /usr/obj/ When make world is complete, diff your backup of /etc with the new /etc. I can't remember if make world populates /etc, so you might have to check /usr/src/etc against both /etc and your backup copy. Then recompile a new kernel image and reboot. Hope this helps. - -burton- On Sat, 3 Jan 1998, Tommy Hallgren wrote: > Date: Sat, 3 Jan 1998 20:43:49 +0100 (MET) > From: Tommy Hallgren > To: freebsd-questions@FreeBSD.ORG > Cc: md6tommy@mdstud.chalmers.se > Subject: 2.2.1 to 2.2-stable > > Hi! > > Can anyone tell me if it is faster to install 2.2.1 sources and cvsup to > 2.2-stable or to clean /usr/src and then cvsup to 2.2-stable? > > My machine is a 486 66MHz and my modem a 33k6 one and I'm currently > running 2.2.1 FreeBSD. > > (Please cc me since I'm not on this list) > > regards, Tommy > > > - --------------- Burton Sampley bsampley@best.com or bsampley@haywire.csuhayward.edu or bsampley@slip.net PGP key available at http://www.best.com/~bsampley/pgp.html -----BEGIN PGP SIGNATURE----- Version: 2.6.2 iQCUAwUBNK72HXt2O8KJtMdBAQHGhQP4m0LGJs7tHDQPHZxAHLqRqs7lUQ/jAecY iIP8HPa4eW0ny3lZYSl2HtUTM3GQayNoosevbAPgxFyzpWWYeWdNgHKA1olpd2Eb WCBnQVM7t9VyRcNgS7g/0Pf7cDdwx+OdHBqTzwGKu9bzkoAfvTWfbFk8aRNfbVdH LuNFQ914Fw== =Qw/x -----END PGP SIGNATURE----- From owner-freebsd-questions Sat Jan 3 18:41:42 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id SAA22513 for questions-outgoing; Sat, 3 Jan 1998 18:41:42 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from send1b.yahoomail.com (send1b.yahoomail.com [205.180.60.23]) by hub.freebsd.org (8.8.7/8.8.7) with SMTP id SAA22508 for ; Sat, 3 Jan 1998 18:41:39 -0800 (PST) (envelope-from rgireyev@yahoo.com) Message-ID: <19980104024123.11595.rocketmail@send1b.yahoomail.com> Received: from [206.175.205.204] by send1b; Sat, 03 Jan 1998 18:41:23 PST Date: Sat, 3 Jan 1998 18:41:23 -0800 (PST) From: Rudy Gireyev Subject: X questions To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk OK I'm very new to X without the CDE so I got some simple questions: 1. How the heck to switch from one terminal to another using the keyboard. Alt+F1 and Alt+F2 doesn't work :-) 2. Is there a CDE for XFree86? Where is it? I know it's no Workplace Shell but hey it's better than nothing. 3. Since I'm on the subject of OS/2 is there a Launchpad utility identical to OS/2 for X? 4. What's the best way to start X upon bootup so that I login when I'm already in X? 5. All docs I've found in X deal with installation and/or troubleshooting (of installation). Is there anything available online or is the book my only realistic option. Thanks. Rudy. _________________________________________________________ DO YOU YAHOO!? Get your free @yahoo.com address at http://mail.yahoo.com From owner-freebsd-questions Sat Jan 3 18:54:36 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id SAA22980 for questions-outgoing; Sat, 3 Jan 1998 18:54:36 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from fly.HiWAAY.net (root@fly.HiWAAY.net [208.147.154.56]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id SAA22975 for ; Sat, 3 Jan 1998 18:54:28 -0800 (PST) (envelope-from sprice@hiwaay.net) Received: from bonsai.hiwaay.net (tnt1-112.HiWAAY.net [208.147.147.112]) by fly.HiWAAY.net (8.8.8/8.8.6) with SMTP id UAA31736; Sat, 3 Jan 1998 20:54:17 -0600 (CST) Message-ID: <34AEFA2D.42877E5C@hiwaay.net> Date: Sat, 03 Jan 1998 20:55:41 -0600 From: Steve Price X-Mailer: Mozilla 3.04Gold (X11; I; FreeBSD 3.0-CURRENT i386) MIME-Version: 1.0 To: Doug White CC: jmcla@ocala.cs.miami.edu, gsutter@pobox.com, freebsd-questions@FreeBSD.ORG Subject: Re: tclsh References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Doug White wrote: > > >On Thu, 1 Jan 1998, Joe "Marcus" Clarke wrote: > > > >> I just installed 2.2.5-RELEASE from scratch, and things went flawlessly. > >> I did it via ftp using a modem...not bad guys! Anyway, after a lot of > >> configuring and tweaking, I finally needed to run the addgroup command. > >> Much to my surprise, it didn't work. Turns out, /usr/bin/tclsh didn't > >> exist. I KNOW I didn't delete it. NEVER touch anything in /usr/bin. Sorry I missed this one earlier. :( You should try pw(8) as it has replaced the *group files that used to depend on tclsh. > >That's confirmed; the 2.2.5 bin distribution doesn't have tclsh, but the > >2.2.2 one does. I'll submit a bug report. > > I submitted this as misc/4938 on 11/04/97; it is still open. I will look at this one shortly. > Huh, they closed mine immediately. Tell them to close it and refer to > bin/5405. > > Looks like I need to sign on to the bugs system and clean out the chaff. > misc/3586 is the classic `downloaded boot.flp in ASCII mode' newbie > screwup. And it's critical priority! :-( Yes please sign up and if you need a committer to do some dirty work give me a jingle. Steve > Doug White | University of Oregon > Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant > http://gladstone.uoregon.edu/~dwhite | Computer Science Major From owner-freebsd-questions Sat Jan 3 18:56:17 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id SAA23097 for questions-outgoing; Sat, 3 Jan 1998 18:56:17 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from emu.sourcee.com (emu.sourcee.com [199.201.159.173]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id SAA23092 for ; Sat, 3 Jan 1998 18:56:14 -0800 (PST) (envelope-from nrice@emu.sourcee.com) Received: (from nrice@localhost) by emu.sourcee.com (8.8.8/8.8.3) id VAA01883; Sat, 3 Jan 1998 21:56:08 -0500 (EST) Message-ID: <19980103215608.04696@emu.sourcee.com> Date: Sat, 3 Jan 1998 21:56:08 -0500 From: Norman C Rice To: Rudy Gireyev Cc: freebsd-questions@freebsd.org Subject: Re: Garbled text in handbook References: <19980104022931.27128.rocketmail@send1a.yahoomail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.88 In-Reply-To: <19980104022931.27128.rocketmail@send1a.yahoomail.com>; from Rudy Gireyev on Sat, Jan 03, 1998 at 06:29:31PM -0800 Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk On Sat, Jan 03, 1998 at 06:29:31PM -0800, Rudy Gireyev wrote: > Downloaded ftp.freebsd.org/pub/FreeBSD/docs/handbook-ascii.gz yesterday. > Did gunzip handbook-ascii.gz > Then did view handbook-ascii > There are a bunch of unprintable characters all over the file. > > Uttsa Mader Here!!! > > Rudy > > > > > _________________________________________________________ > DO YOU YAHOO!? > Get your free @yahoo.com address at http://mail.yahoo.com Try `more handbook.ascii' or `less handbook.ascii'. I believe those "unprintable characters" are printable; they are just backspaces (^H) for boldfacing and underlining. -- Regards, Norman C. Rice, Jr. From owner-freebsd-questions Sat Jan 3 19:06:51 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id TAA23700 for questions-outgoing; Sat, 3 Jan 1998 19:06:51 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from emu.sourcee.com (emu.sourcee.com [199.201.159.173]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id TAA23694 for ; Sat, 3 Jan 1998 19:06:44 -0800 (PST) (envelope-from nrice@emu.sourcee.com) Received: (from nrice@localhost) by emu.sourcee.com (8.8.8/8.8.3) id WAA01926; Sat, 3 Jan 1998 22:06:39 -0500 (EST) Message-ID: <19980103220639.05681@emu.sourcee.com> Date: Sat, 3 Jan 1998 22:06:39 -0500 From: Norman C Rice To: Rudy Gireyev Cc: freebsd-questions@FreeBSD.ORG Subject: Re: X questions References: <19980104024123.11595.rocketmail@send1b.yahoomail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.88 In-Reply-To: <19980104024123.11595.rocketmail@send1b.yahoomail.com>; from Rudy Gireyev on Sat, Jan 03, 1998 at 06:41:23PM -0800 Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Sat, Jan 03, 1998 at 06:41:23PM -0800, Rudy Gireyev wrote: > OK I'm very new to X without the CDE so I got some simple questions: > > 1. How the heck to switch from one terminal to another using the > keyboard. Alt+F1 and Alt+F2 doesn't work :-) If you're trying to access another virtual terminal, try Ctrl+Alt+Fn where `n' is the vitual terminal number. After accessing the a virtual terminal you only need to use Alt+Fn to access others (and one of those will return you to X). > > 2. Is there a CDE for XFree86? Where is it? I know it's no Workplace > Shell but hey it's better than nothing. Try the KDE port. > > 3. Since I'm on the subject of OS/2 is there a Launchpad utility > identical to OS/2 for X? Try the KDE or AfterStep (like NextStep) ports. > > 4. What's the best way to start X upon bootup so that I login when I'm > already in X? > > 5. All docs I've found in X deal with installation and/or > troubleshooting (of installation). Is there anything available online > or is the book my only realistic option. ^^^^^^^^ What aspect of X are you interested in? If "the book" is one of the O'Reilly series, you can't go wrong (IMHO). > > Thanks. Rudy. > _________________________________________________________ > DO YOU YAHOO!? > Get your free @yahoo.com address at http://mail.yahoo.com -- Regards, Norman C. Rice, Jr. From owner-freebsd-questions Sat Jan 3 19:39:39 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id TAA25327 for questions-outgoing; Sat, 3 Jan 1998 19:39:39 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from proxyb1.san.rr.com (proxyb1-atm.san.rr.com [204.210.0.10]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id TAA25321 for ; Sat, 3 Jan 1998 19:39:32 -0800 (PST) (envelope-from erich@compecon.com) Received: from compecon.com (dt060nd1.san.rr.com [204.210.35.209]) by proxyb1.san.rr.com (8.8.7/8.8.8) with ESMTP id TAA08629; Sat, 3 Jan 1998 19:37:54 -0800 (PST) Message-ID: <34AF0416.98A79BF8@compecon.com> Date: Sat, 03 Jan 1998 19:37:58 -0800 From: Eric Hedstrom X-Mailer: Mozilla 4.04 [en] (Win95; U) MIME-Version: 1.0 To: Doug White CC: Mark Turrin , freebsd-questions@FreeBSD.ORG Subject: Re: Tape Backups References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Hi guys, Doug White wrote: > > On Thu, 1 Jan 1998, Mark Turrin wrote: > > Now is it correct that I could replace ``/dev/sd0a'' with the ``/'' (the > > real mount point of the partition) and it will still work? > > Don't bet on it. I don't know if dump knows to resolve filesystems using > /etc/fstab or not. This is how I use dump: dump 0auf /dev/nrst0 / dump 0auf /dev/nrst0 /usr dump 0au /var (so it rewinds after doing /var) So ya, you can use the mount point of the partition. Eric Hedstrom erich@compecon.com From owner-freebsd-questions Sat Jan 3 20:11:56 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id UAA27038 for questions-outgoing; Sat, 3 Jan 1998 20:11:56 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from ns.bta.net.cn (ns.bta.net.cn [202.96.0.133]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id UAA27033 for ; Sat, 3 Jan 1998 20:11:47 -0800 (PST) (envelope-from coca@deYin.com) From: coca@deYin.com Received: from ccav (ts2-10.sta.net.cn [202.96.198.138]) by ns.bta.net.cn (8.8.5/8.8.5) with SMTP id MAA09110 for ; Sun, 4 Jan 1998 12:10:43 +0800 (CST) Message-Id: <3.0.32.19980103142031.0068fa28@public.sta.net.cn> X-Sender: shdeyina@public.sta.net.cn X-Mailer: Windows Eudora Pro Version 3.0 (32) Date: Sun, 04 Jan 1998 12:11:46 +0800 To: freebsd-questions@FreeBSD.ORG Subject: Help me! Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Hi, How can I configure FreeBSD auto dial-up to ISp for timing? Could I let the FreeBSD not only make a mail server in LAN,but also let it make a dial-up to ISP terminal? Regards to you and Thanks. Chen.coca From owner-freebsd-questions Sat Jan 3 20:16:47 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id UAA27338 for questions-outgoing; Sat, 3 Jan 1998 20:16:47 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from max.fys.ruu.nl (max.fys.ruu.nl [131.211.32.73]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id UAA27329 for ; Sat, 3 Jan 1998 20:16:39 -0800 (PST) (envelope-from P.Dekkers@gromit.eu.org) Received: from gromit.eu.org (root@psd.7da.nl [195.108.246.100]) by max.fys.ruu.nl (8.8.7/8.8.7/hjm) with ESMTP id MAA25756 for ; Sat, 3 Jan 1998 12:25:25 +0100 (MET) Received: from localhost (localhost [127.0.0.1]) by gromit.eu.org (8.8.7/8.8.7/psd) with SMTP id MAA00269 for ; Sat, 3 Jan 1998 12:19:30 +0100 Date: Sat, 3 Jan 1998 12:19:30 +0100 (MET) From: Paul Dekkers X-Sender: paul@gromit.nev.ml.org Reply-To: Paul Dekkers To: freebsd-questions@freebsd.org Subject: login.access Message-ID: X-Mood: :-) but almost |-| (sleeping) Organization: Me and organized? MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Hi I'm running FreeBSD 2.2.1 and discovered the login.access file in /etc... but I tried the following: -:users:ttyv5 to prevent users from the group 'users' logging in from ttyv5 BUT: they were still able to! If I replaced 'users' with the 'username' it worked well... -:ALL except staff:ALL however this rule worked: everybody was not allowed to login from everywhere BUT users in the staff group... If I replaced this with +:staff:ALL -:ALL:ALL it hadn't work... And doing this I can prevent users from loggin in except the 'staff' but, when I just don't want the group 'students' to log in: -:student:ALL except .localnet doesn't work... and when converting that to a plus '+' rule it doesn't work... Is there something wrong with that file or am I doing something wrong? (maybe just under FreeBSD 2.2.1 and it's a bug which has been fixed now??? (not able to try it)) Paul From owner-freebsd-questions Sat Jan 3 20:26:09 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id UAA27990 for questions-outgoing; Sat, 3 Jan 1998 20:26:09 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from freebie.brann.org (doorman.brann.org [166.84.191.154]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id UAA27979 for ; Sat, 3 Jan 1998 20:26:03 -0800 (PST) (envelope-from jbrann@freebie.brann.org) Received: (from jbrann@localhost) by freebie.brann.org (8.8.7/8.8.7) id XAA04457 for questions@freebsd.org; Sat, 3 Jan 1998 23:25:57 -0500 (EST) (envelope-from jbrann) From: John Brann Message-Id: <199801040425.XAA04457@freebie.brann.org> Subject: Problems with sound card To: questions@freebsd.org Date: Sat, 3 Jan 1998 23:25:56 -0500 (EST) Organisation: Not while I'm at home X-Mailer: ELM [version 2.4ME+ PL32 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Hi, I have an ancient SoundBlaster Pro in my machine. Under older releases of FreeBSD I have run nas successfully. Under 2.2.5 nas runs, but only with '.au' files. All other types result in a variety of unpleasant noises. Even '.au' files have one unwanted effect - after playing the sound there is a pause of about 5 seconds before the client program terminates. I'd like to give up nas, so that I can get sound from Netscape. Any ideas? TIA John -- Prohibit work, prohibit pay - people are dying! Situationist International slogan finger jbrann@doorman.brann.org for pgp public key From owner-freebsd-questions Sat Jan 3 20:34:56 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id UAA28714 for questions-outgoing; Sat, 3 Jan 1998 20:34:56 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from luke.cpl.net (luke.cpl.net [209.150.73.2]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id UAA28705 for ; Sat, 3 Jan 1998 20:34:53 -0800 (PST) (envelope-from shawn@luke.cpl.net) Received: from localhost (shawn@localhost) by luke.cpl.net (8.8.8/8.6.12) with SMTP id UAA08646 for ; Sat, 3 Jan 1998 20:33:44 -0800 (PST) Date: Sat, 3 Jan 1998 20:33:43 -0800 (PST) From: Shawn Ramsey To: questions@freebsd.org Subject: Livingston Radius? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Has anyone compiled Livingston Radius 2.0.1 under FreeBSD? If anyone has a Makefile id appreciate it...it does need to work with both des and md5, otherwise it would be no better than the BSDI binary... thanks From owner-freebsd-questions Sat Jan 3 20:35:04 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id UAA28746 for questions-outgoing; Sat, 3 Jan 1998 20:35:04 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from send1a.yahoomail.com (send1a.yahoomail.com [205.180.60.22]) by hub.freebsd.org (8.8.7/8.8.7) with SMTP id UAA28722 for ; Sat, 3 Jan 1998 20:34:57 -0800 (PST) (envelope-from rgireyev@yahoo.com) Message-ID: <19980104043434.3999.rocketmail@send1a.yahoomail.com> Received: from [206.175.210.8] by send1a; Sat, 03 Jan 1998 20:34:34 PST Date: Sat, 3 Jan 1998 20:34:34 -0800 (PST) From: Rudy Gireyev Subject: Re: X questions To: Norman C Rice Cc: freebsd-questions@FreeBSD.ORG MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk I'm only interested in X as a user, since I don't plan on coding in X, so The Users Guide by O'Reilly was the one I was talking about. Basically I'm looking for a book to answer the questions I posted here and then some. Rudy ---Norman C Rice wrote: > > On Sat, Jan 03, 1998 at 06:41:23PM -0800, Rudy Gireyev wrote: > > OK I'm very new to X without the CDE so I got some simple questions: > > > > 1. How the heck to switch from one terminal to another using the > > keyboard. Alt+F1 and Alt+F2 doesn't work :-) > > If you're trying to access another virtual terminal, try Ctrl+Alt+Fn > where `n' is the vitual terminal number. After accessing the a virtual > terminal you only need to use Alt+Fn to access others (and one of > those will return you to X). > > > > > 2. Is there a CDE for XFree86? Where is it? I know it's no Workplace > > Shell but hey it's better than nothing. > > Try the KDE port. > > > > > 3. Since I'm on the subject of OS/2 is there a Launchpad utility > > identical to OS/2 for X? > > Try the KDE or AfterStep (like NextStep) ports. > > > > > 4. What's the best way to start X upon bootup so that I login when I'm > > already in X? > > > > 5. All docs I've found in X deal with installation and/or > > troubleshooting (of installation). Is there anything available online > > or is the book my only realistic option. > ^^^^^^^^ > What aspect of X are you interested in? If "the book" is one of the > O'Reilly series, you can't go wrong (IMHO). > > > > > Thanks. Rudy. > > _________________________________________________________ > > DO YOU YAHOO!? > > Get your free @yahoo.com address at http://mail.yahoo.com > > -- > Regards, > Norman C. Rice, Jr. > _________________________________________________________ DO YOU YAHOO!? Get your free @yahoo.com address at http://mail.yahoo.com From owner-freebsd-questions Sat Jan 3 21:07:33 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id VAA00763 for questions-outgoing; Sat, 3 Jan 1998 21:07:33 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from cedb.dpcsys.com (cedb.dpcsys.com [206.16.184.4]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id VAA00758 for ; Sat, 3 Jan 1998 21:07:26 -0800 (PST) (envelope-from dan@dpcsys.com) Received: from localhost (dan@localhost) by cedb.dpcsys.com (8.8.5/8.8.2) with SMTP id FAA04594; Sun, 4 Jan 1998 05:07:28 GMT Date: Sat, 3 Jan 1998 21:07:28 -0800 (PST) From: Dan Busarow To: Rudy Gireyev cc: freebsd-questions@freebsd.org Subject: Re: X questions In-Reply-To: <19980104024123.11595.rocketmail@send1b.yahoomail.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk On Sat, 3 Jan 1998, Rudy Gireyev wrote: > 2. Is there a CDE for XFree86? Where is it? I know it's no Workplace > Shell but hey it's better than nothing. htp://www.xinside.com Works great. Dan -- Dan Busarow 714 443 4172 DPC Systems / Beach.Net dan@dpcsys.com Dana Point, California 83 09 EF 59 E0 11 89 B4 8D 09 DB FD E1 DD 0C 82 From owner-freebsd-questions Sat Jan 3 21:24:42 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id VAA01690 for questions-outgoing; Sat, 3 Jan 1998 21:24:42 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from pau-router.itb.ac.id (pau-router.ITB.ac.id [167.205.22.99]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id VAA01667 for ; Sat, 3 Jan 1998 21:24:33 -0800 (PST) (envelope-from kadex@design.paume.itb.ac.id) Received: from design.paume.itb.ac.id (design.paume.itb.ac.id [167.205.21.100]) by pau-router.itb.ac.id (8.8.5/8.8.5) with ESMTP id MAA24772 for ; Sun, 4 Jan 1998 12:29:18 +0700 (JAVT) Received: from DESIGN/MAIL by design.paume.itb.ac.id (Mercury 1.21); 4 Jan 98 11:44:12 +0700 Received: from MAIL by DESIGN (Mercury 1.21); 4 Jan 98 11:43:53 +0700 Received: from Tanner.design.paume.itb.ac.id by design.paume.itb.ac.id (Mercury 1.21); 4 Jan 98 11:43:49 +0700 Message-ID: <34AF1383.650C@design.paume.itb.ac.id> Date: Sun, 04 Jan 1998 11:43:47 +0700 From: kadex X-Mailer: Mozilla 3.01Gold (Win95; I) MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: how to modify it ? Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk dear sir, i have some script.. here it is. -------------------------------------- while : ; do #start echo "hello..!!" #first command cd /etc #second command whoami #third command #end done -------------------------------------- i wanna modify that scipt, therefore first-command, second-command, and third command run arbitrary (randomly). Could you help me how to do it ? finally, thank for your attention. sulaiman nb: please send your answer to sulaiman@students.itb.ac.id From owner-freebsd-questions Sat Jan 3 21:37:32 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id VAA02551 for questions-outgoing; Sat, 3 Jan 1998 21:37:32 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from allegro.lemis.com (allegro.lemis.com [192.109.197.134]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id VAA02541 for ; Sat, 3 Jan 1998 21:37:15 -0800 (PST) (envelope-from grog@lemis.com) Resent-From: grog@lemis.com Received: from freebie.lemis.com (freebie.lemis.com [192.109.197.137]) by allegro.lemis.com (8.8.7/8.8.5) with ESMTP id QAA21025 for ; Sun, 4 Jan 1998 16:07:06 +1030 (CST) Received: (from grog@localhost) by freebie.lemis.com (8.8.8/8.8.7) id QAA07939 for questions@FreeBSD.org; Sun, 4 Jan 1998 16:07:06 +1030 (CST) (envelope-from grog) Resent-Message-Id: <199801040537.QAA07939@freebie.lemis.com> Message-ID: <19980103145639.56960@lemis.com> Date: Sat, 3 Jan 1998 14:56:39 +1030 From: Greg Lehey To: FreeBSD Questions Subject: Encylopedia Britannica, Oxford English Dictionary and FreeBSD Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.84e Organisation: LEMIS, PO Box 460, Echunga SA 5153, Australia Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-41-739-7062 WWW-Home-Page: http://www.lemis.com/~grog Resent-Date: Sun, 4 Jan 1998 16:07:06 +1030 Resent-To: FreeBSD Questions Sender: owner-freebsd-questions@FreeBSD.org X-Loop: FreeBSD.org Precedence: bulk I'm considering getting the Encyclopedia Britannica and/or the Oxford English Dictionary on CD-ROM, but I'm a little concerned that the data may be in formats that FreeBSD doesn't understand (like a proprietary browser that runs only under Microsoft). Does anybody have any experience with these CDs? Other things that would be of interest would be the relationship between the CD-ROM version and the printed version (especially for the EB. It seems that it would be difficult to get that much information on a single disk). And, of course, if you know any places where the prices are good, that would help too. Thanks in advance Greg From owner-freebsd-questions Sat Jan 3 21:53:00 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id VAA03331 for questions-outgoing; Sat, 3 Jan 1998 21:53:00 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from ocala.cs.miami.edu (ocala.cs.miami.edu [129.171.34.17]) by hub.freebsd.org (8.8.7/8.8.7) with SMTP id VAA03324 for ; Sat, 3 Jan 1998 21:52:55 -0800 (PST) (envelope-from jmcla@ocala.cs.miami.edu) Received: from ocala.cs.miami.edu by ocala.cs.miami.edu via SMTP (950413.SGI.8.6.12/940406.SGI) for id AAA10354; Sun, 4 Jan 1998 00:52:48 -0500 Date: Sun, 4 Jan 1998 00:52:47 -0500 (EST) From: "Joe \"Marcus\" Clarke" To: FreeBSD User Questions List Subject: LAT Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Anyone know of a port of LAT to FreeBSD? Any clue on if someone may do one? Joe Clarke From owner-freebsd-questions Sat Jan 3 21:56:07 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id VAA03547 for questions-outgoing; Sat, 3 Jan 1998 21:56:07 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from onyx.atipa.com (user25862@ns.atipa.com [208.128.22.10]) by hub.freebsd.org (8.8.7/8.8.7) with SMTP id VAA03491 for ; Sat, 3 Jan 1998 21:55:17 -0800 (PST) (envelope-from freebsd@atipa.com) Received: (qmail-queue invoked by uid 1018); 4 Jan 1998 06:01:49 -0000 Date: Sat, 3 Jan 1998 23:01:49 -0700 (MST) From: Atipa X-Sender: freebsd@dot.ishiboo.com To: freebsd-questions@freebsd.org Subject: syslog-free console/vty possible? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Hi, I was setting up a new machine, and was having cabling difficulties. I was getting so many error messages on the console that I couldn't really do anything without ing every other second. How can you make a syslog free console? Is there any way I can make /dev/console appear only on ttyv0? I even changed the /dev/console line to /dev/null in /etc/syslog.conf and HUP syslog but it still didn't work. Is there such an option in either /etc/syslog.conf or /etc/ttys to fix this? Thanks, Kevin From owner-freebsd-questions Sat Jan 3 22:11:12 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id WAA04229 for questions-outgoing; Sat, 3 Jan 1998 22:11:12 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from send1a.yahoomail.com (send1a.yahoomail.com [205.180.60.22]) by hub.freebsd.org (8.8.7/8.8.7) with SMTP id WAA04219 for ; Sat, 3 Jan 1998 22:11:05 -0800 (PST) (envelope-from rgireyev@yahoo.com) Message-ID: <19980104061041.488.rocketmail@send1a.yahoomail.com> Received: from [206.175.229.143] by send1a; Sat, 03 Jan 1998 22:10:41 PST Date: Sat, 3 Jan 1998 22:10:41 -0800 (PST) From: Rudy Gireyev Subject: Re: Livingston Radius? To: Shawn Ramsey , questions@FreeBSD.ORG MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk If no-one replies here try freebsd-isp@freebsd.org Rudy ---Shawn Ramsey wrote: > > Has anyone compiled Livingston Radius 2.0.1 under FreeBSD? If anyone has a > Makefile id appreciate it...it does need to work with both des and md5, > otherwise it would be no better than the BSDI binary... > > thanks > > > > _________________________________________________________ DO YOU YAHOO!? Get your free @yahoo.com address at http://mail.yahoo.com From owner-freebsd-questions Sat Jan 3 22:19:59 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id WAA04681 for questions-outgoing; Sat, 3 Jan 1998 22:19:59 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from send1b.yahoomail.com (send1b.yahoomail.com [205.180.60.23]) by hub.freebsd.org (8.8.7/8.8.7) with SMTP id WAA04671 for ; Sat, 3 Jan 1998 22:19:54 -0800 (PST) (envelope-from rgireyev@yahoo.com) Message-ID: <19980104061933.11566.rocketmail@send1b.yahoomail.com> Received: from [206.175.229.143] by send1b; Sat, 03 Jan 1998 22:19:33 PST Date: Sat, 3 Jan 1998 22:19:33 -0800 (PST) From: Rudy Gireyev Subject: Re: how to modify it ? To: kadex , freebsd-questions@FreeBSD.ORG MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk It's hard to say without knowing what you are trying to accomplish. The first thing that pops into my head is create three of these scripts and run them at the same time. Rudy. ---kadex wrote: > > dear sir, > i have some script.. here it is. > > -------------------------------------- > while : ; > do > #start > echo "hello..!!" #first command > cd /etc #second command > whoami #third command > #end > done > > -------------------------------------- > > i wanna modify that scipt, therefore first-command, second-command, and > third command run arbitrary (randomly). Could you help me how to do it ? > > finally, thank for your attention. > > sulaiman > > nb: please send your answer to sulaiman@students.itb.ac.id > _________________________________________________________ DO YOU YAHOO!? Get your free @yahoo.com address at http://mail.yahoo.com From owner-freebsd-questions Sat Jan 3 23:16:51 1998 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id XAA07820 for questions-outgoing; Sat, 3 Jan 1998 23:16:51 -0800 (PST) (envelope-from owner-freebsd-questions) Received: from freight.msn.bc.ca (pc-21656.bc.rogers.wave.ca [24.112.126.7]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id XAA07808 for ; Sat, 3 Jan 1998 23:16:36 -0800 (PST) (envelope-from bpepa@msn.bc.ca) Received: from [192.168.1.2] (stn02.blk1.intranet.msn.bc.ca [192.168.1.2]) by freight.msn.bc.ca (8.8.7/8.8.7) with ESMTP id XAA01805; Sat, 3 Jan 1998 23:19:00 -0800 (PST) (envelope-from bpepa@msn.bc.ca) Message-Id: In-Reply-To: <19980103145639.56960@lemis.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Date: Sat, 3 Jan 1998 23:20:57 -0900 To: Greg Lehey From: Ben Pepa Subject: Re: Encylopedia Britannica, Oxford English Dictionary and FreeBSD Cc: FreeBSD Questions Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk We use Encyclopedia Britannica at our high school and it requires DOS/Windows as it contains dos executables that run off the CD (through Netscape). Unless you can find a DOS emulator for FreeBSD, it probably won't work. It does contain HTML files of each topic/category, but is hard to search without the executables. However, Britannica offers a online internet version that works on all platforms . Info is available at http://www.eb.com I have not used Oxford Dictionary before, so I don't know anything about it's compatibility. >I'm considering getting the Encyclopedia Britannica and/or the Oxford >English Dictionary on CD-ROM, but I'm a little concerned that the data >may be in formats that FreeBSD doesn't understand (like a proprietary >browser that runs only under Microsoft). Does anybody have any >experience with these CDs? Other things that would be of interest >would be the relationship between the CD-ROM version and the printed >version (especially for the EB. It seems that it would be difficult >to get that much information on a single disk). And, of course, if >you know any places where the prices are good, that would help too. > >Thanks in advance >Greg Ben