From owner-freebsd-hardware Mon Jun 21 1:49: 9 1999 Delivered-To: freebsd-hardware@freebsd.org Received: from bart.esiee.fr (bart.esiee.fr [147.215.1.20]) by hub.freebsd.org (Postfix) with ESMTP id AD7841521D for ; Mon, 21 Jun 1999 01:48:37 -0700 (PDT) (envelope-from bonnetf@bart.esiee.fr) Received: (from bonnetf@localhost) by bart.esiee.fr (8.9.1a/8.9.1) id KAA25227 for freebsd-hardware@FreeBSD.ORG; Mon, 21 Jun 1999 10:48:31 +0200 (METDST) From: Frank Bonnet Message-Id: <199906210848.KAA25227@bart.esiee.fr> Subject: DPT PM1554U2 RAID controller support To: freebsd-hardware@FreeBSD.ORG Date: Mon, 21 Jun 1999 10:48:31 +0200 (METDST) X-Mailer: ELM [$Revision: 1.17.214.3 $] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Transfer-Encoding: 7bit Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi list I' received a RAID controller to plug into our mailhub ( DELL P450 ) The device is : DPT Smartraid DECADE PM1554U2 ULTRA2 I use FreeBSD 3.1 on the machine ( soon 3.2 ) Does this device is supported on this version of FreeBSD ? TIA -- Frank Bonnet Groupe ESIEE Paris To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Mon Jun 21 7:22:14 1999 Delivered-To: freebsd-hardware@freebsd.org Received: from tahiti.oss.uswest.net (tahiti.oss.uswest.net [204.147.85.151]) by hub.freebsd.org (Postfix) with ESMTP id 29F17151C0 for ; Mon, 21 Jun 1999 07:21:14 -0700 (PDT) (envelope-from pmckenna@uswest.net) Received: from otto.oss.uswest.net (otto.oss.uswest.net [204.147.85.81]) by tahiti.oss.uswest.net (8.9.2/8.9.2) with ESMTP id JAA60839; Mon, 21 Jun 1999 09:21:12 -0500 (CDT) (envelope-from pmckenna@uswest.net) Message-ID: X-Mailer: XFMail 1.3 [p0] on FreeBSD X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: Date: Mon, 21 Jun 1999 09:22:08 -0500 (CDT) From: Pete Mckenna To: Randy Bush , FreeBSD Hardware Subject: RE: rack mount atx Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org check out: http://www.calpc.com/html/rack_mount_computer.html The 2U's are nice if you don't need more than 2 PCI slots. We use them wi th Intel L440GX's so so we don't need much else. General devices makes the slides. (Sorry no URL's they havn't entered the online age yet). Pete On 19-Jun-99 Randy Bush wrote: > anyone have recommendations or a collection of urls for rack mount atx > chassis? what i need is > atx form factor > one 3.5 hd > one 3.5 floppy > one 5.25 cdrom > not a lot of slots > would like not too high, but 7" absolute max > sliding rails > cool and quiet > > randy > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-hardware" in the body of the message ---------------------------------- E-Mail: Pete Mckenna Date: 21-Jun-99 Time: 09:17:34 This message was sent by XFMail ---------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Mon Jun 21 7:26: 5 1999 Delivered-To: freebsd-hardware@freebsd.org Received: from rip.psg.com (rip.psg.com [147.28.0.39]) by hub.freebsd.org (Postfix) with ESMTP id 0458414FB5 for ; Mon, 21 Jun 1999 07:25:16 -0700 (PDT) (envelope-from randy@psg.com) Received: from localhost (612 bytes) by rip.psg.com via sendmail with P:stdio/R:inet_resolve/T:smtp (sender: ) (ident using unix) id for ; Mon, 21 Jun 1999 07:25:16 -0700 (PDT) (Smail-3.2.0.101 1997-Dec-17 #1 built 1999-Apr-1) Message-Id: Date: Mon, 21 Jun 1999 07:25:16 -0700 (PDT) From: Randy Bush MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: Pete Mckenna Cc: FreeBSD Hardware Subject: RE: rack mount atx References: Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > http://www.calpc.com/html/rack_mount_computer.html looks interesting. on 2ru units, air flow seems to be the big differentiator. check out http://www.tesys.com/enclosures/rackmount_telepro_201.shtml randy To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Mon Jun 21 12:58:33 1999 Delivered-To: freebsd-hardware@freebsd.org Received: from shell.futuresouth.com (shell.futuresouth.com [198.78.58.28]) by hub.freebsd.org (Postfix) with ESMTP id 8488114C85 for ; Mon, 21 Jun 1999 12:58:26 -0700 (PDT) (envelope-from tim@futuresouth.com) Received: (from tim@localhost) by shell.futuresouth.com (8.9.3/8.9.3) id OAA02447; Mon, 21 Jun 1999 14:57:36 -0500 (CDT) Date: Mon, 21 Jun 1999 14:57:36 -0500 From: Tim Tsai To: Frank Bonnet Cc: freebsd-hardware@FreeBSD.ORG Subject: Re: DPT PM1554U2 RAID controller support Message-ID: <19990621145736.A2381@futuresouth.com> References: <199906210848.KAA25227@bart.esiee.fr> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.3i In-Reply-To: <199906210848.KAA25227@bart.esiee.fr>; from Frank Bonnet on Mon, Jun 21, 1999 at 10:48:31AM +0200 Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org No - not until there is I2O support in FreeBSD and then the Linux driver is supposed to work. Works very well in my NT machine though. Tim On Mon, Jun 21, 1999 at 10:48:31AM +0200, Frank Bonnet wrote: > Hi list > > I' received a RAID controller to plug > into our mailhub ( DELL P450 ) > > The device is : > > DPT Smartraid DECADE PM1554U2 ULTRA2 > > I use FreeBSD 3.1 on the machine ( soon 3.2 ) > > Does this device is supported on this version of FreeBSD ? > > TIA > -- > Frank Bonnet > Groupe ESIEE Paris > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-hardware" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Mon Jun 21 14: 7:25 1999 Delivered-To: freebsd-hardware@freebsd.org Received: from alpo.whistle.com (alpo.whistle.com [207.76.204.38]) by hub.freebsd.org (Postfix) with ESMTP id 0B11614EEE for ; Mon, 21 Jun 1999 14:07:22 -0700 (PDT) (envelope-from julian@whistle.com) Received: from current1.whistle.com (current1.whistle.com [207.76.205.22]) by alpo.whistle.com (8.9.1a/8.9.1) with SMTP id OAA49105; Mon, 21 Jun 1999 14:06:44 -0700 (PDT) Date: Mon, 21 Jun 1999 14:06:44 -0700 (PDT) From: Julian Elischer To: Tim Tsai Cc: Frank Bonnet , freebsd-hardware@FreeBSD.ORG Subject: Re: DPT PM1554U2 RAID controller support In-Reply-To: <19990621145736.A2381@futuresouth.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org The FreeBSD driver is in testing talk to shimon@simon-shapiro.org (that may be an underline) On Mon, 21 Jun 1999, Tim Tsai wrote: > No - not until there is I2O support in FreeBSD and then the Linux driver > is supposed to work. > > Works very well in my NT machine though. > > Tim > > On Mon, Jun 21, 1999 at 10:48:31AM +0200, Frank Bonnet wrote: > > Hi list > > > > I' received a RAID controller to plug > > into our mailhub ( DELL P450 ) > > > > The device is : > > > > DPT Smartraid DECADE PM1554U2 ULTRA2 > > > > I use FreeBSD 3.1 on the machine ( soon 3.2 ) > > > > Does this device is supported on this version of FreeBSD ? > > > > TIA > > -- > > Frank Bonnet > > Groupe ESIEE Paris > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-hardware" in the body of the message > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-hardware" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Tue Jun 22 22: 7:57 1999 Delivered-To: freebsd-hardware@freebsd.org Received: from mailarray.mpx.com.au (local1.mpx.com.au [203.29.192.90]) by hub.freebsd.org (Postfix) with ESMTP id 34AF4154D2 for ; Tue, 22 Jun 1999 22:07:55 -0700 (PDT) (envelope-from death@southcom.com.au) Received: from x(really [198.142.232.98]) by mailarray.mpx.com.au via smtpd with esmtp id for ; Wed, 23 Jun 1999 15:07:54 +1000 (/\##/\ Smail3.1.30.13.Y2K #30.35 built 1-mar-01) Message-Id: <4.2.0.56.19990623150119.0096c4f0@mail.southcom.com.au> X-Sender: death@mail.southcom.com.au X-Mailer: QUALCOMM Windows Eudora Pro Version 4.2.0.56 (Beta) Date: Wed, 23 Jun 1999 15:07:42 +1000 To: freebsd-hardware@freebsd.org From: death Subject: Netcomm Roadster II USB (AM5050) Modem Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi! I was wondering if anybody knew if FreeBSD (any version) supports USB modems or this modem (Netcomm Roadster II USB AM5050) in particular? And also, would anybody know just what the deal with USB is? Would all modems use the same way to communicate via USB or does there have to be a different driver for every device and every OS? And! If there was a need for a seperate driver of some sort, would anybody out there want to make one? :P Cheers death To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Wed Jun 23 1:13:12 1999 Delivered-To: freebsd-hardware@freebsd.org Received: from mrelay.jrc.it (mrelay.jrc.it [139.191.1.65]) by hub.freebsd.org (Postfix) with ESMTP id DA97615470 for ; Wed, 23 Jun 1999 01:13:07 -0700 (PDT) (envelope-from nick.hibma@jrc.it) Received: from elect8 (elect8.jrc.it [139.191.71.152]) by mrelay.jrc.it (LMC5692) with SMTP id KAA19572; Wed, 23 Jun 1999 10:12:57 +0200 (MET DST) Date: Wed, 23 Jun 1999 10:12:55 +0200 (MET DST) From: Nick Hibma X-Sender: n_hibma@elect8 Reply-To: Nick Hibma To: death Cc: freebsd-hardware@FreeBSD.ORG, USB BSD list Subject: Re: Netcomm Roadster II USB (AM5050) Modem In-Reply-To: <4.2.0.56.19990623150119.0096c4f0@mail.southcom.com.au> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org There is some preliminary support for modems available although not yet in the kernel in 4.0. Check out http://www.etla.net/~n_hibma/usb/usb.pl download http://www.etla.net/~n_hibma/usb/ucdc.c and merge it into your kernel config using the patch that is given there as well. The driver does not work yet, or at least, I can only talk one way to the device because somehow transfers get lost. But I will be working on this this week. Let me know whether your modem is attached by the ucdc driver. There is preliminary USB support in 3.2 and non at all in 2.2.x. Check the page for updates once in a while. I try to keep Project Status slightly up to date. Nick On Wed, 23 Jun 1999, death wrote: > > Hi! > > I was wondering if anybody knew if FreeBSD (any version) supports USB > modems or this modem (Netcomm Roadster II USB AM5050) in particular? > > And also, would anybody know just what the deal with USB is? Would all > modems use the same way to communicate via USB or does there have to be a > different driver for every device and every OS? > > And! If there was a need for a seperate driver of some sort, would anybody > out there want to make one? :P > > Cheers > > death > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-hardware" in the body of the message > > -- ISIS/STA, T.P.270, Joint Research Centre, 21020 Ispra, Italy To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Wed Jun 23 1:15:13 1999 Delivered-To: freebsd-hardware@freebsd.org Received: from mrelay.jrc.it (mrelay.jrc.it [139.191.1.65]) by hub.freebsd.org (Postfix) with ESMTP id 0F14E15608 for ; Wed, 23 Jun 1999 01:15:09 -0700 (PDT) (envelope-from nick.hibma@jrc.it) Received: from elect8 (elect8.jrc.it [139.191.71.152]) by mrelay.jrc.it (LMC5692) with SMTP id KAA19668; Wed, 23 Jun 1999 10:15:01 +0200 (MET DST) Date: Wed, 23 Jun 1999 10:14:59 +0200 (MET DST) From: Nick Hibma X-Sender: n_hibma@elect8 Reply-To: Nick Hibma To: death Cc: freebsd-hardware@FreeBSD.ORG Subject: Re: Netcomm Roadster II USB (AM5050) Modem In-Reply-To: <4.2.0.56.19990623150119.0096c4f0@mail.southcom.com.au> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Oh, yes. Another thing. Could you download the usb_dump util that is listed at http://www.etla.net/~n_hibma/usb/usb.pl http://www.etla.net/~n_hibma/usb/usb_dump.c compile it and run it against the generic device that attaches to the modem driver? it dumps the descriptors available in the modem. cc -Wall -I/sys/dev/usb usb_dump.c -o usb_dump ./usb_dump /dev/ugen0 ./usb_dump /dev/ugen0 | mail hibma@skylink.it Cheers, Nick On Wed, 23 Jun 1999, death wrote: > > Hi! > > I was wondering if anybody knew if FreeBSD (any version) supports USB > modems or this modem (Netcomm Roadster II USB AM5050) in particular? > > And also, would anybody know just what the deal with USB is? Would all > modems use the same way to communicate via USB or does there have to be a > different driver for every device and every OS? > > And! If there was a need for a seperate driver of some sort, would anybody > out there want to make one? :P > > Cheers > > death > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-hardware" in the body of the message > > -- ISIS/STA, T.P.270, Joint Research Centre, 21020 Ispra, Italy To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Wed Jun 23 12:29:14 1999 Delivered-To: freebsd-hardware@freebsd.org Received: from hotmail.com (f205.hotmail.com [207.82.251.96]) by hub.freebsd.org (Postfix) with SMTP id B0DDE15073 for ; Wed, 23 Jun 1999 12:29:04 -0700 (PDT) (envelope-from repenting@hotmail.com) Received: (qmail 76288 invoked by uid 0); 23 Jun 1999 19:29:03 -0000 Message-ID: <19990623192903.76287.qmail@hotmail.com> Received: from 209.57.150.2 by www.hotmail.com with HTTP; Wed, 23 Jun 1999 12:29:03 PDT X-Originating-IP: [209.57.150.2] From: Mike Del To: freebsd-hardware@freebsd.org Subject: I need help locating my USB and IR devices in my notebook computer. Date: Wed, 23 Jun 1999 19:29:03 GMT Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_273e5cfa_416d76d4$41697a0a" Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org This is a multi-part message in MIME format. ------=_NextPart_000_273e5cfa_416d76d4$41697a0a Content-Type: text/plain; format=flowed Information for my Toshiba Satellite 315CDS notebook computer... (So where the hell are my USB and IR devices located?) I think that the USB device might be on pci0:17:0 , and my IR device might be on pci0:11:0. I am not sure of this. I really need someone to confirm where they are located because I would like to start a FreeBSD IR project. Information is attached as sysinfo.txt Thanks, Mike _______________________________________________________________ Get Free Email and Do More On The Web. Visit http://www.msn.com ------=_NextPart_000_273e5cfa_416d76d4$41697a0a Content-Type: text/plain; name="sysinfo.txt" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="sysinfo.txt" Information for my Toshiba Satellite 315CDS notebook computer... (So where the hell are my USB and IR devices located?) -------------------------------------------------------------------------------- #1 Information I felt was of importance, from 'dmesg': Probing for devices on PCI bus 0: chip0 rev 44 class 60000 on pci0:0:0 vga0 rev 198 class 30000 on pci0:4:0 (so we have my Chips & Tech. 65555 PCI, hardware version 198) pci0:11: vendor=0x1033, device=0x0035, class=serial, subclass=0x03 int a irq 11 [no driver assigned] pci0:17: Toshiba, device=0x0701, class=comms, subclass=0x80 int a irq 11 [no driver assigned] sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A (this is my com port 1) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1 not found at 0x2f8 pcic0 at 0x3e0-0x3e1 irq 11 on isa (this is my Toshiba ToPIC97 Cardbus controller... 'on isa' isn't this part of my pcibus? *see section #4) PC-Card ctlr(0) Intel 82365A/B (5 mem & 2 I/O windows) pcic0: slot 0 controller I/O address 0x3e0 pcic0: slot 1 controller I/O address 0x3e0 -------------------------------------------------------------------------------- #2 from 'pciconf -l': pci0:0:0: class=0x060000 card=0x00011179 chip=0x06011179 rev=0x2c hdr=0x00 pci0:4:0: class=0x030000 card=0x00011179 chip=0x00e5102c rev=0xc6 hdr=0x00 pci0:11:0: class=0x0c0310 card=0x00011179 chip=0x00351033 rev=0x02 hdr=0x00 pci0:17:0: class=0x078000 card=0x00011179 chip=0x07011179 rev=0x21 hdr=0x00 -------------------------------------------------------------------------------- #3 from 'pciconf -a': pci0:0:0: attached pci0:0:0: attached pci0:11:0: not attached pci0:17:0: not attached -------------------------------------------------------------------------------- #4 from some crappy web page about linux on the 315CDS. I think the person said that the information was from windows (whatever the thing is that shows you devices). ________ PCMCIA / ------+ PCMCIA I/O Address: 03E0-03E1 _______________ PCI Subsystem / -------------+ Section IRQ I/O Range ------------------------------------- PCI 11 FFE0-FFFF USB 11 FCFFF000-FCFFFFF PCMCIA D0000-D0FFF -------------------------------------------------------------------------------- from a DOS tool called 'CTPCI' that reports infomation about the pcibus: Bus Nr. 00h 00 0 Vendor = Toshiba America Info Systems No PCI-INT Device = Pentium Host Bridge for notebooks, Rev = 2Ch 04 0 Vendor = Chips & Technologies NO PCI-INT Device = C&T 65555 GUI Accelerator, Rev = C6h 0B 0 Vendor = NEC Corporation/NEC electronics Hong Kong Ltd. INT A = IRQ 11 Device = USB-Bridge Rev = 02h 11 0 Vendor = Toshiba America Info Systems No PCI-INT Device = 0701h -- New device ID, Rev = 21h -------------------------------------------------------------------------------- from a DOS tool called dr.hardware: Informations about PCI Functional Units ======================================= Version : 02.10 CMOS Accesstype : 1 Cycle Type: PCI Busses: 22 Dev. Fct. Unit Sub and Base Class RevCode Vendor Name -------------------------------------------------------------------------------- 0h 0h 601 Host Bridge 2Ch 1179 ??? 4h 0h E5 VGA Video Adapter C6h 102C CHIPS AND TECHNOLOGIES Bh 0h 35 unknown (Code 0Ch) 2h 1033 NEC CORP. 11h 0h 701 unknown (Code 07h) 21h 1179 ??? PCI-Device Details ================== -- Product Description ----------------------------------------------------- | Produkt name : Toshiba AIS P5-Host Bridge f.Notebooks | | Device class /ID's : Host Bridge [1179h/ 601h/2Ch] | | Vendor : ??? | | Sub Vendor(Name/ID): not defined (0001) | -- Setup -------------------------------------------- supports ------------- | PCI-/ISA IRQ : none / - | 66 MHZ : no | | Adress space : I/O:no Memory:yes | self test : no | | Latency : 0 Clocks (allowed: 0 - 0) | UDF : no | | Cache Line Size : 256 Bytes | Fast Back-to-Back: yes | | | Power Management : no | | Bus Master : active -- actual status -------- | Fast Back-to-Back : no | Parity Error : no | | Wait Cycles : no | System Error : no | | Special Cycles : no | Master Abort : yes | | Parity Error : don't observe | Target Abort M: no | | VGA Palette Snoop : no | Target Abort T: no | | SERR Signal : no | Devsel Timing : medium | | Write Access with Invalidation : no | Data Parity Error: no | ---------------------------------------------------------------------------- PCI-Device Details ================== -- Product Description ----------------------------------------------------- | Produkt name : ??? | | Device class /ID's : VGA Video Adapter [102Ch/ E5h/C6h] | | Vendor : CHIPS AND TECHNOLOGIES | | Sub Vendor(Name/ID): not defined (0001) | -- Setup -------------------------------------------- supports ------------- | PCI-/ISA IRQ : none / - | 66 MHZ : no | | Adress space : I/O:yes Memory:yes | self test : no | | Latency : 0 Clocks (allowed: 0 - 0) | UDF : no | | Cache Line Size : 0 Bytes | Fast Back-to-Back: yes | | | Power Management : no | | Bus Master : inactive -- actual status -------- | Fast Back-to-Back : no | Parity Error : no | | Wait Cycles : yes | System Error : no | | Special Cycles : no | Master Abort : no | | Parity Error : don't observe | Target Abort M: no | | VGA Palette Snoop : no | Target Abort T: no | | SERR Signal : no | Devsel Timing : medium | | Write Access with Invalidation : no | Data Parity Error: no | ---------------------------------------------------------------------------- PCI-Device Details ================== -- Product Description ----------------------------------------------------- | Produkt name : ??? | | Device class /ID's : unknown (Code 0Ch) [1033h/ 35h/ 2h] | | Vendor : NEC CORP. | | Sub Vendor(Name/ID): not defined (0001) | -- Setup -------------------------------------------- supports ------------- | PCI-/ISA IRQ : INTA / 11 | 66 MHZ : no | | Adress space : I/O:no Memory:yes | self test : no | | Latency : 64 Clocks (allowed: 1 - 21)| UDF : no | | Cache Line Size : 0 Bytes | Fast Back-to-Back: no | | | Power Management : no | | Bus Master : active -- actual status -------- | Fast Back-to-Back : no | Parity Error : no | | Wait Cycles : no | System Error : no | | Special Cycles : no | Master Abort : no | | Parity Error : don't observe | Target Abort M: no | | VGA Palette Snoop : no | Target Abort T: no | | SERR Signal : no | Devsel Timing : medium | | Write Access with Invalidation : no | Data Parity Error: no | ---------------------------------------------------------------------------- PCI-Device Details ================== -- Product Description ----------------------------------------------------- | Produkt name : ??? | | Device class /ID's : unknown (Code 07h) [1179h/ 701h/21h] | | Vendor : ??? | | Sub Vendor(Name/ID): not defined (0001) | -- Setup -------------------------------------------- supports ------------- | PCI-/ISA IRQ : INTA / 11 | 66 MHZ : no | | Adress space : I/O:yes Memory:no | self test : no | | Latency : 64 Clocks (allowed: 0 - 0) | UDF : no | | Cache Line Size : 0 Bytes | Fast Back-to-Back: no | | | Power Management : no | | Bus Master : active -- actual status -------- | Fast Back-to-Back : no | Parity Error : no | | Wait Cycles : no | System Error : no | | Special Cycles : no | Master Abort : no | | Parity Error : don't observe | Target Abort M: no | | VGA Palette Snoop : no | Target Abort T: no | | SERR Signal : no | Devsel Timing : slow | | Write Access with Invalidation : no | Data Parity Error: no | ---------------------------------------------------------------------------- ------=_NextPart_000_273e5cfa_416d76d4$41697a0a-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Thu Jun 24 7:16: 3 1999 Delivered-To: freebsd-hardware@freebsd.org Received: from asteroid.svib.ru (asteroid.svib.ru [195.151.166.145]) by hub.freebsd.org (Postfix) with ESMTP id 6F4D114E17; Thu, 24 Jun 1999 07:15:25 -0700 (PDT) (envelope-from tarkhil@asteroid.svib.ru) Received: from shuttle.svib.ru (shuttle.svib.ru [195.151.166.144]) by asteroid.svib.ru (8.9.3/8.9.3) with ESMTP id SAA23413; Thu, 24 Jun 1999 18:15:19 +0400 (MSD) (envelope-from tarkhil@asteroid.svib.ru) Received: from shuttle.svib.ru (minas-tirith.pol.ru [127.0.0.1]) by shuttle.svib.ru (8.9.3/8.8.8) with ESMTP id SAA01459; Thu, 24 Jun 1999 18:19:00 +0400 (MSD) (envelope-from tarkhil@shuttle.svib.ru) Message-Id: <199906241419.SAA01459@shuttle.svib.ru> To: hardware@freebsd.org Cc: stable@freebsd.org Reply-To: tarkhil@asteroid.svib.ru Subject: CDRecord not seeing CD-R X-URL: http://freebsd.svib.ru Date: Thu, 24 Jun 1999 18:18:59 +0400 From: Alex Povolotsky Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hello! I've just set up Tekram 310 SCSI adapter (works ok!), attached a cd-writer to it, tested it as CD-ROM (works OK!), ncr0: rev 0x23 int a irq 9 on pci0.10.0 ... cd0 at ncr0 bus 0 target 1 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 8) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed and cdrecord can't find it :-( [18:17] shuttle:~ # cdrecord -VV -vv -scanbus -debug dev: (NULL POINTER) speed: -1 fs: -1 Cdrecord release 1.8a22 Copyright (C) 1995-1999 Jörg Schilling TOC Type: 1 = CD-ROM cdrecord: No such file or directory. Cannot open SCSI driver. [18:17] shuttle:~ # cdrecord -VV -vv -scanbus -debug dev=0,1,0 dev: 0,1,0 speed: -1 fs: -1 Cdrecord release 1.8a22 Copyright (C) 1995-1999 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '0,1,0' scsibus: 0 target: 1 lun: 0 cdrecord: No such file or directory. Cannot open SCSI driver. [18:18] shuttle:~ # cdrecord -VV -vv -scanbus -debug dev=cd0c:0,1,0 dev: cd0c:0,1,0 speed: -1 fs: -1 Cdrecord release 1.8a22 Copyright (C) 1995-1999 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: 'cd0c:0,1,0' devname: 'cd0c' scsibus: 0 target: 1 lun: 0 cdrecord: No such file or directory. Cannot open SCSI driver. I don't have lots of experience with SCSI, and thus I can't find what can be wrong. Please help! Alex. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Thu Jun 24 7:58: 7 1999 Delivered-To: freebsd-hardware@freebsd.org Received: from asteroid.svib.ru (asteroid.svib.ru [195.151.166.145]) by hub.freebsd.org (Postfix) with ESMTP id CE41E14CE4; Thu, 24 Jun 1999 07:57:30 -0700 (PDT) (envelope-from tarkhil@asteroid.svib.ru) Received: from shuttle.svib.ru (shuttle.svib.ru [195.151.166.144]) by asteroid.svib.ru (8.9.3/8.9.3) with ESMTP id SAA23692; Thu, 24 Jun 1999 18:57:24 +0400 (MSD) (envelope-from tarkhil@asteroid.svib.ru) Received: from shuttle.svib.ru (minas-tirith.pol.ru [127.0.0.1]) by shuttle.svib.ru (8.9.3/8.8.8) with ESMTP id TAA00805; Thu, 24 Jun 1999 19:01:03 +0400 (MSD) (envelope-from tarkhil@shuttle.svib.ru) Message-Id: <199906241501.TAA00805@shuttle.svib.ru> X-Mailer: exmh version 2.0.3 To: tarkhil@asteroid.svib.ru Cc: hardware@FreeBSD.ORG, stable@FreeBSD.ORG Subject: Re: CDRecord not seeing CD-R In-reply-to: Your message "Thu, 24 Jun 1999 18:18:59 +0400." <199906241419.SAA01459@shuttle.svib.ru> Reply-To: tarkhil@asteroid.svib.ru X-URL: http://freebsd.svib.ru Mime-Version: 1.0 Content-Type: text/plain; charset=koi8-r Content-Transfer-Encoding: 8bit Date: Thu, 24 Jun 1999 19:01:03 +0400 From: Alex Povolotsky Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org <199906241419.SAA01459@shuttle.svib.ru>Alex Povolotsky writes: >I've just set up Tekram 310 SCSI adapter (works ok!), attached a cd-writer >to it, tested it as CD-ROM (works OK!), > >ncr0: rev 0x23 int a irq 9 on pci0.10.0 Alex, you silly boy, add device pass0 to your kernel, enable POSIX realtime and NEVER try to run any disk-hog like tcl/tk while writing! Alex. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Thu Jun 24 10:35:29 1999 Delivered-To: freebsd-hardware@freebsd.org Received: from pinhead.parag.codegen.com (207-44-235-154.CodeGen.COM [207.44.235.154]) by hub.freebsd.org (Postfix) with ESMTP id 76D0B151E1; Thu, 24 Jun 1999 10:35:25 -0700 (PDT) (envelope-from parag@pinhead.parag.codegen.com) Received: from pinhead.parag.codegen.com (parag@localhost.parag.codegen.com [127.0.0.1]) by pinhead.parag.codegen.com (8.9.3/8.9.3) with ESMTP id KAA24561; Thu, 24 Jun 1999 10:35:14 -0700 (PDT) (envelope-from parag@pinhead.parag.codegen.com) To: tarkhil@asteroid.svib.ru Cc: hardware@FreeBSD.ORG, stable@FreeBSD.ORG Subject: Re: CDRecord not seeing CD-R In-Reply-To: Message from Alex Povolotsky of "Thu, 24 Jun 1999 19:01:03 +0400." <199906241501.TAA00805@shuttle.svib.ru> X-Face: =O'Kj74icvU|oS*<7gS/8'\Pbpm}okVj*@UC!IgkmZQAO!W[|iBiMs*|)n*`X ]pW%m>Oz_mK^Gdazsr.Z0/JsFS1uF8gBVIoChGwOy{EK=<6g?aHE`[\S]C]T0Wm X-URL: http://www.codegen.com Date: Thu, 24 Jun 1999 10:35:14 -0700 Message-ID: <24557.930245714@pinhead.parag.codegen.com> From: Parag Patel Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Thu, 24 Jun 1999 19:01:03 +0400, Alex Povolotsky wrote: >to your kernel, enable POSIX realtime and NEVER try to run any disk-hog like >tcl/tk while writing! Um - I do it all the time. My mailer of choice is exmh. I've run exmh, netscape, audio/video clips seti@home, all while burning CDs with no difficulties. (Mind you, I do have a dual-CPU SMP system.) The trick is to run "cdrecord" as root so that it will set itself with high "realtime" priorities for its processes, and use a temp disk file for the CD image. cdrecord seems to automatically try to set realtime priorities, at least when built from the port. I found piping mkisofs into cdrecord didn't work well for deep hierarachies - mkisofs sometimes hit a place where it'd spend an inordinate amout of time spinning and cdrecord's buffer would empty, then bye-bye CD-R blank. System activity or lack thereof made no difference - it's something inside mkisofs. -- Parag Patel To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Thu Jun 24 16:44:39 1999 Delivered-To: freebsd-hardware@freebsd.org Received: from amber.eaznet.com (amber.eaznet.com [216.19.20.5]) by hub.freebsd.org (Postfix) with ESMTP id DDC0914D50 for ; Thu, 24 Jun 1999 16:44:36 -0700 (PDT) (envelope-from eddie@eaznet.com) Received: from eaznet.com (admin.eaznet.com [216.19.20.16]) by amber.eaznet.com (8.9.1a/8.9.1) with ESMTP id QAA00329 for ; Thu, 24 Jun 1999 16:47:10 -0700 (MST) Message-ID: <3772C2F2.1ECD8A6C@eaznet.com> Date: Thu, 24 Jun 1999 16:44:50 -0700 From: Eddie - EAZNet Internet Services Reply-To: eddie@eaznet.com Organization: EAZNet Internet Services, Safford, AZ X-Mailer: Mozilla 4.61 [en]C-CCK-MCD (Win98; U) X-Accept-Language: en MIME-Version: 1.0 To: FreeBSD Hardware Mailing List Subject: SuperMicro P6DGU motherboard Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I am planning to install FreeBSD 3.2-Release on a system using the SuperMicro P6DGU motherboard with a single P3-450 CPU. Has anyone used this board before? Has anyone experienced any problems with the 440GX chipset? Please reply directly, I'm not on this list. TIA, -- Eddie Fry eddie@eaznet.com EAZNet Internet Services 220 West 7th Street Safford, AZ 85546 (520) 348-0292 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Thu Jun 24 20:34:42 1999 Delivered-To: freebsd-hardware@freebsd.org Received: from mail.HiWAAY.net (fly.HiWAAY.net [208.147.154.56]) by hub.freebsd.org (Postfix) with ESMTP id AE5CB14E0E; Thu, 24 Jun 1999 20:25:18 -0700 (PDT) (envelope-from dkelly@nospam.hiwaay.net) Received: from nospam.hiwaay.net (tnt8-216-180-14-37.dialup.HiWAAY.net [216.180.14.37]) by mail.HiWAAY.net (8.9.1a/8.9.0) with ESMTP id WAA07735; Thu, 24 Jun 1999 22:25:12 -0500 (CDT) Received: from localhost (localhost [127.0.0.1]) by nospam.hiwaay.net (8.9.3/8.9.3) with ESMTP id UAA30336; Thu, 24 Jun 1999 20:54:42 -0500 (CDT) (envelope-from dkelly@nospam.hiwaay.net) Message-Id: <199906250154.UAA30336@nospam.hiwaay.net> X-Mailer: exmh version 2.0.2 2/24/98 To: tarkhil@asteroid.svib.ru Cc: hardware@FreeBSD.ORG, stable@FreeBSD.ORG From: David Kelly Subject: Re: CDRecord not seeing CD-R In-reply-to: Message from Alex Povolotsky of "Thu, 24 Jun 1999 19:01:03 +0400." <199906241501.TAA00805@shuttle.svib.ru> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Thu, 24 Jun 1999 20:54:42 -0500 Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Alex Povolotsky writes: > <199906241419.SAA01459@shuttle.svib.ru>Alex Povolotsky writes: > >I've just set up Tekram 310 SCSI adapter (works ok!), attached a cd-writer > >to it, tested it as CD-ROM (works OK!), > > > >ncr0: rev 0x23 int a irq 9 on pci0.10.0 > > Alex, you silly boy, add > > device pass0 > > to your kernel, enable POSIX realtime and NEVER try to run any disk-hog like > tcl/tk while writing! It was a year or two ago when I first tried FreeBSD and cdrecord for burning CDs. Was so darn successful at it that before I finished the batch of 50 or so CD's I was trying pretty hard to break it. System was FreeBSD 2.2.5 or 2.2.6 or thereabouts. Cdrecord 1.6. Pentium 133. Before we knew about the F00F bug. Had a whopping 24MB of RAM. Running X, twm as the window manager. Had a narrow Adaptec 2940AU SCSI card. All 7 available SCSI ID's were used. Only one HD was inside the PC. Everything else was one device to one external box/PS. It was a mess. Had one Seagate ST15150N 4G SCSI drive, several other 1G SSCI drives, one 1G IDE drive. Tape drive or two. And a 1st generation Yamaha CDR-100 4x recorder. Never did make a bad disk with the above. By the time I was finished was running Netscape and "build makeworld" at the same time. And using exmh for email. All connected to a moderately busy network segment. And yes, each and every one of the 50 was Q.C.'ed after burning with my own homegrown verions of "tripwire." Simply a glorified "find /cdrom -type f -exec md5 "{}" \;" While burning one CD I mounted the previous in the ATAPI CD to verify it. Don't remember if I was running cdrecord as root but know I had a root xterm open in order to mount the new CD's. This exercise was so successful we later purchased (3) P-II 233's for the purpose of doing more of the same. But one thing lead to another and the P-II's were purchased but no CD-R's. Eventually the Yamaha CD-R was moved to an SGI O2 were similar success was found (the P-II's were doomed to a life of NT, but before the end I rescued one and made a FreeBSD tape duplication station out of it with (3) SCSI interfaces and (4) DDS-3 tape drives). I do remember cdrecord on the O2 *had* to be run as root. So I made it set-uid owned by root. Created a cdrecord group. Removed execute-for-others from the cdrecord binary. FreeBSD did not recogonize the Yamaha as a readable CD device so I could not read the CD after writing using the same drive. Same for the SGI O2, only difference was SGI's mediad knew how to automount a CD in its internal CDROM drive. -- David Kelly N4HHE, dkelly@nospam.hiwaay.net ===================================================================== The human mind ordinarily operates at only ten percent of its capacity -- the rest is overhead for the operating system. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Thu Jun 24 22:33: 4 1999 Delivered-To: freebsd-hardware@freebsd.org Received: from asteroid.svib.ru (asteroid.svib.ru [195.151.166.145]) by hub.freebsd.org (Postfix) with ESMTP id 5F7BF15105 for ; Thu, 24 Jun 1999 22:32:56 -0700 (PDT) (envelope-from tarkhil@asteroid.svib.ru) Received: from shuttle.svib.ru (shuttle.svib.ru [195.151.166.144]) by asteroid.svib.ru (8.9.3/8.9.3) with ESMTP id JAA27654; Fri, 25 Jun 1999 09:32:51 +0400 (MSD) (envelope-from tarkhil@asteroid.svib.ru) Received: from shuttle.svib.ru (minas-tirith.pol.ru [127.0.0.1]) by shuttle.svib.ru (8.9.3/8.8.8) with ESMTP id JAA83650; Fri, 25 Jun 1999 09:36:35 +0400 (MSD) (envelope-from tarkhil@shuttle.svib.ru) Message-Id: <199906250536.JAA83650@shuttle.svib.ru> X-Mailer: exmh version 2.0.3 To: David Kelly Cc: hardware@freebsd.org Subject: Re: CDRecord not seeing CD-R In-reply-to: Your message "Thu, 24 Jun 1999 20:54:42 CDT." <199906250154.UAA30336@nospam.hiwaay.net> Reply-To: tarkhil@asteroid.svib.ru X-URL: http://freebsd.svib.ru Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Fri, 25 Jun 1999 09:36:31 +0400 From: Alex Povolotsky Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org <199906250154.UAA30336@nospam.hiwaay.net>David Kelly writes: >> to your kernel, enable POSIX realtime and NEVER try to run any disk-hog like >> tcl/tk while writing! > >It was a year or two ago when I first tried FreeBSD and cdrecord for >burning CDs. Was so darn successful at it that before I finished the >batch of 50 or so CD's I was trying pretty hard to break it. > >System was FreeBSD 2.2.5 or 2.2.6 or thereabouts. Cdrecord 1.6. Pentium >133. Before we knew about the F00F bug. Had a whopping 24MB of RAM. >Running X, twm as the window manager. Had a narrow Adaptec 2940AU SCSI >card. All 7 available SCSI ID's were used. Only one HD was inside the >PC. Everything else was one device to one external box/PS. It was a >mess. Had one Seagate ST15150N 4G SCSI drive, several other 1G SSCI >drives, one 1G IDE drive. Tape drive or two. And a 1st generation Yamaha >CDR-100 4x recorder. Well, building kernel runned OK... But starting exmh from _IDE_ disk caused everything except starting exmh to stop temporarily. And 8 Mb buffer exhausted. 14 Mb buffer seems to be Ok for nearly anything (min FIFO was 8%). I _do_ know that SCSI is cool. I do know that IDE sucks. BTW, how do I check that DMA is on, and should it help _really_? My system is AMD K6-II/350, 64 Mb RAM/3 IDE disks [yes I know that sucks], FreeBSD actually uese only two, IDE 8x CD-ROM; 3.2-STABLE. Any program actively using disk I/O (starting exmh, find, make installworld) cause system to become VERY unresponcive. Alex. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Fri Jun 25 17: 8:36 1999 Delivered-To: freebsd-hardware@freebsd.org Received: from jane.lfn.org (charbonnet.net [209.16.92.10]) by hub.freebsd.org (Postfix) with SMTP id 4F98014C4C for ; Fri, 25 Jun 1999 17:08:20 -0700 (PDT) (envelope-from caj@lfn.org) Received: (qmail 10213 invoked by uid 100); 26 Jun 1999 00:07:50 -0000 Date: Fri, 25 Jun 1999 19:07:49 -0500 (CDT) From: Craig Johnston To: freebsd-hardware@freebsd.org Subject: socket 7 mobo w/onboard SCSI for server? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org A friend of mine is needing to purchase a few motherboards for server machines and wants to go with socket 7 boards with built-in Adaptec SCSI. (He'll be using the K6.) Can any of you folks suggest good candidates? Stability running FreeBSD and reliability are of course paramount. Thanks, Craig. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Fri Jun 25 19:23:17 1999 Delivered-To: freebsd-hardware@freebsd.org Received: from control.colossus.dynip.com (226-193.adsl2.avtel.net [207.71.226.193]) by hub.freebsd.org (Postfix) with ESMTP id 65DF014DE4; Fri, 25 Jun 1999 19:23:06 -0700 (PDT) (envelope-from dburr@control.colossus.dynip.com) Received: (from dburr@localhost) by control.colossus.dynip.com (8.9.3/8.9.2) id TAA00634; Fri, 25 Jun 1999 19:23:05 -0700 (PDT) (envelope-from dburr) Message-ID: X-Mailer: XFMail 1.3 [p0] on FreeBSD X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 Date: Fri, 25 Jun 1999 19:23:04 -0700 (PDT) Organization: Computer Help From: Donald Burr To: FreeBSD SCSI , FreeBSD Hardware Subject: Need help choosing a new SCSI card Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org It was bound to happen. After getting a new (external) tape drive and hooking it up to my system, I now find that my SCSI chain is too long to work reliably. If I unplug all my external devices (thus leaving only the internal hard drives), everything works fine. So it's time to get me a new SCSI card -- one with multiple buses on the same card. Normally, I would buy a second SCSI card, but unfortunately I am also out of PCI slots. So I need some help from the FreeBSD SCSI community in choosing a new card! Here are my requirements: * IMPORTANT!! Separate SCSI buses for internal and external connector. My SCSI chain is too long to have both internal and external be on the same bus. * Narrow Ultra SCSI support (50-pin, 20MB/s). I don't have any Wide or Ultra2/U2W/etc. devices, nor do I plan on getting any. * FreeBSD compatibility, of course! But it would be great if the card works under Linux as well, since I have to do projects in Linux now and then. * Reasonable cost. I unfortunately don't have a lot of money to spend. Are there any NCR/Symbios cards that fit the bill? I really like this chipset and it is a heck of a lot cheaper than Adaptec... In addition, if someone can point me to a good mail order (or Web order) place where I can get this card, I would be very grateful. Thanks! --- Donald Burr -Member The FreeBSD Project| PGP: Your *NEW* WWW HomePage: http://more.at/dburr/ ICQ #16997506 | right to Address: P.O. Box 91212, Santa Barbara, CA 93190-1212 | 'Net privacy. Phone: (805) 957-9666 FAX: (800) 492-5954 | USE IT. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Fri Jun 25 19:35: 6 1999 Delivered-To: freebsd-hardware@freebsd.org Received: from sac.uky.edu (sac.uky.edu [128.163.1.163]) by hub.freebsd.org (Postfix) with ESMTP id 802E1152B6 for ; Fri, 25 Jun 1999 19:34:54 -0700 (PDT) (envelope-from repett0@sac.uky.edu) Received: from localhost (repett0@localhost) by sac.uky.edu (8.9.1/891-uk) with SMTP id WAA29578 for ; Fri, 25 Jun 1999 22:34:46 -0400 (EDT) Date: Fri, 25 Jun 1999 22:34:44 -0400 (EDT) From: Ronald Petty To: freebsd-hardware@FreeBSD.ORG Subject: sgi and freebsd Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org does anyone know where you can get a book on sgi device drivers. We are doing some VR work here at UK on machines running freebsd and sgi, but we can't find jack about SGI irix 6.5 device drivers. I know this isn't the list but someone might know. Thanks... Ron To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Fri Jun 25 19:46:56 1999 Delivered-To: freebsd-hardware@freebsd.org Received: from databus.databus.com (databus.databus.com [198.186.154.34]) by hub.freebsd.org (Postfix) with SMTP id 1F5D414D93 for ; Fri, 25 Jun 1999 19:46:49 -0700 (PDT) (envelope-from barney@databus.databus.com) From: Barney Wolff To: freebsd-hardware@FreeBSD.ORG Date: Fri, 25 Jun 1999 22:40 EDT Subject: Re: sgi and freebsd Content-Length: 999 Content-Type: text/plain Message-ID: <37743f150.6704@databus.databus.com> Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Contact your friendly SGI support person. They have excellent manuals online, but I think they're available only to sgi customers. One actually can get a device driver working with their help - and sgi also has people who can answer such questions, correctly. Of course, that's if you have a support contract. But if you're paying for it, you're entitled to help. Barney Wolff > Date: Fri, 25 Jun 1999 22:34:44 -0400 (EDT) > From: Ronald Petty > To: freebsd-hardware@FreeBSD.ORG > Subject: sgi and freebsd > Content-Length: 385 > > > does anyone know where you can get a book on sgi device drivers. We are > doing some VR work here at UK on machines running freebsd and sgi, but we > can't find jack about SGI irix 6.5 device drivers. I know this isn't the > list but someone might know. > > Thanks... > > Ron > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-hardware" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Fri Jun 25 19:56:11 1999 Delivered-To: freebsd-hardware@freebsd.org Received: from allegro.lemis.com (allegro.lemis.com [192.109.197.134]) by hub.freebsd.org (Postfix) with ESMTP id 4479C14DFD for ; Fri, 25 Jun 1999 19:56:04 -0700 (PDT) (envelope-from grog@freebie.lemis.com) Received: from freebie.lemis.com (freebie.lemis.com [192.109.197.137]) by allegro.lemis.com (8.9.1/8.9.0) with ESMTP id MAA07426; Sat, 26 Jun 1999 12:26:00 +0930 (CST) Received: (from grog@localhost) by freebie.lemis.com (8.9.3/8.9.0) id MAA15128; Sat, 26 Jun 1999 12:25:47 +0930 (CST) Date: Sat, 26 Jun 1999 12:25:46 +0930 From: Greg Lehey To: Barney Wolff Cc: freebsd-hardware@FreeBSD.ORG Subject: Re: sgi and freebsd Message-ID: <19990626122546.A427@freebie.lemis.com> References: <37743f150.6704@databus.databus.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.4i In-Reply-To: <37743f150.6704@databus.databus.com>; from Barney Wolff on Fri, Jun 25, 1999 at 10:40:00PM -0400 WWW-Home-Page: http://www.lemis.com/~grog X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Organization: LEMIS, PO Box 460, Echunga SA 5153, Australia Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-41-739-7062 Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Friday, 25 June 1999 at 22:40:00 -0400, Barney Wolff wrote: >> Date: Fri, 25 Jun 1999 22:34:44 -0400 (EDT) >> From: Ronald Petty >> To: freebsd-hardware@FreeBSD.ORG >> Subject: sgi and freebsd >> Content-Length: 385 >> >> >> does anyone know where you can get a book on sgi device drivers. We are >> doing some VR work here at UK on machines running freebsd and sgi, but we >> can't find jack about SGI irix 6.5 device drivers. I know this isn't the >> list but someone might know. > > Contact your friendly SGI support person. They have excellent manuals > online, but I think they're available only to sgi customers. One > actually can get a device driver working with their help - and sgi > also has people who can answer such questions, correctly. Of course, > that's if you have a support contract. But if you're paying for it, > you're entitled to help. I haven't looked at SGI code, but I would have thought that, as a System V implementation, it would adhere to the ddk/ddi specification, in which case there is quite a bit of literature available. If you're familiar with FreeBSD device drivers, you'll find it's similar enough to be familiar and different enough to be confusing. Greg -- See complete headers for address, home page and phone numbers finger grog@lemis.com for PGP public key To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Fri Jun 25 20: 3: 0 1999 Delivered-To: freebsd-hardware@freebsd.org Received: from sac.uky.edu (sac.uky.edu [128.163.1.163]) by hub.freebsd.org (Postfix) with ESMTP id 582C214CB6 for ; Fri, 25 Jun 1999 20:02:57 -0700 (PDT) (envelope-from repett0@sac.uky.edu) Received: from localhost (repett0@localhost) by sac.uky.edu (8.9.1/891-uk) with SMTP id XAA00760; Fri, 25 Jun 1999 23:02:44 -0400 (EDT) Date: Fri, 25 Jun 1999 23:02:42 -0400 (EDT) From: Ronald Petty To: Greg Lehey Cc: Barney Wolff , freebsd-hardware@FreeBSD.ORG Subject: Re: sgi and freebsd In-Reply-To: <19990626122546.A427@freebie.lemis.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org That is where the problem lies, I have no experience with device drivers, I know the graphics part of this project however I have never built my own hardware(gloves) and the drivers to run them. That is the project in a nut shell. Any good tips.. Thanks... Ron ======================================================================== Ron Petty 252-7173, repett0@sac.uky.edu, Aprt 108 217 Virginia Avenue ======================================================================== On Sat, 26 Jun 1999, Greg Lehey wrote: > On Friday, 25 June 1999 at 22:40:00 -0400, Barney Wolff wrote: > >> Date: Fri, 25 Jun 1999 22:34:44 -0400 (EDT) > >> From: Ronald Petty > >> To: freebsd-hardware@FreeBSD.ORG > >> Subject: sgi and freebsd > >> Content-Length: 385 > >> > >> > >> does anyone know where you can get a book on sgi device drivers. We are > >> doing some VR work here at UK on machines running freebsd and sgi, but we > >> can't find jack about SGI irix 6.5 device drivers. I know this isn't the > >> list but someone might know. > > > > Contact your friendly SGI support person. They have excellent manuals > > online, but I think they're available only to sgi customers. One > > actually can get a device driver working with their help - and sgi > > also has people who can answer such questions, correctly. Of course, > > that's if you have a support contract. But if you're paying for it, > > you're entitled to help. > > I haven't looked at SGI code, but I would have thought that, as a > System V implementation, it would adhere to the ddk/ddi specification, > in which case there is quite a bit of literature available. If you're > familiar with FreeBSD device drivers, you'll find it's similar enough > to be familiar and different enough to be confusing. > > Greg > -- > See complete headers for address, home page and phone numbers > finger grog@lemis.com for PGP public key > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-hardware" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Sat Jun 26 1:45:51 1999 Delivered-To: freebsd-hardware@freebsd.org Received: from ns.skylink.it (ns.skylink.it [194.177.113.1]) by hub.freebsd.org (Postfix) with ESMTP id 8398114D2D; Sat, 26 Jun 1999 01:45:47 -0700 (PDT) (envelope-from hibma@skylink.it) Received: from heidi.plazza.it (va-161.skylink.it [194.185.55.161]) by ns.skylink.it (8.9.1/8.8.8) with ESMTP id KAA22165; Sat, 26 Jun 1999 10:45:07 +0200 Received: from localhost (localhost.plazza.it [127.0.0.1]) by heidi.plazza.it (8.8.8/8.8.5) with SMTP id KAA00373; Sat, 26 Jun 1999 10:45:01 +0200 (CEST) Date: Sat, 26 Jun 1999 10:45:01 +0200 (CEST) From: Nick Hibma X-Sender: n_hibma@heidi.plazza.it Reply-To: Nick Hibma To: Brian Handy Cc: freebsd-scsi@FreeBSD.org, freebsd-hardware@FreeBSD.org Subject: Re: firewire support In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org You might want to have a look at the documentation first to see what part of it uses OHCI. We do have a OHCI low level driver for USB and if I am not mistaken FireWire uses OHCI as well. If that is the case, you might be able to grab sys/dev/ohci and modify that one to your taste. I've had a couple of e-mails from people wanting to work on it, but never heard anything from them again (ca. half a year ago). Nick On Fri, 25 Jun 1999, Brian Handy wrote: > Hey all, > > I just searched the mail archives for anything on firewire (IEEE-1394) and > came up with nothing. Does anybody know anything about this? I > understand Adaptec has a combo card and we've got some things we could use > this for, but I don't know much about it just now. I guess I'm both > wondering (a) if there's support for it and (b) there isn't, but firewire > is [vague, short description here...] > > Not entirely sure -scsi is the right place for this, but they *seem* > related, far as I can tell... > > Thanks, > > > Brian > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-scsi" in the body of the message > > -- e-Mail: hibma@skylink.it To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Sat Jun 26 7:15:55 1999 Delivered-To: freebsd-hardware@freebsd.org Received: from ns.skylink.it (ns.skylink.it [194.177.113.1]) by hub.freebsd.org (Postfix) with ESMTP id 70FF914D5E; Sat, 26 Jun 1999 07:15:47 -0700 (PDT) (envelope-from hibma@skylink.it) Received: from heidi.plazza.it (va-165.skylink.it [194.185.55.165]) by ns.skylink.it (8.9.1/8.8.8) with ESMTP id QAA28271; Sat, 26 Jun 1999 16:15:07 +0200 Received: from localhost (localhost.plazza.it [127.0.0.1]) by heidi.plazza.it (8.8.8/8.8.5) with SMTP id QAA01231; Sat, 26 Jun 1999 16:11:29 +0200 (CEST) Date: Sat, 26 Jun 1999 16:11:28 +0200 (CEST) From: Nick Hibma X-Sender: n_hibma@heidi.plazza.it Reply-To: Nick Hibma To: FreeBSD CURRENT Mailing list , FreeBSD Hardware Mailing list Subject: USB project status Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Project status of the USB project: Currently under development: Rewrite of uhub driver to take full advantage of the newbus architecture. It compiles but has not been tested yet. Rewrite of umass driver to take full advantage of CAM and its 'actions', using callbacks for USB transfers (msmith's idea). This will reduce the time required to boot. (see http://www.etla.net/~n_hibma/usb/usb.pl#UMASSDriver) Support for 3Com modem model 5605 (Voice Faxmodem Pro) and for 3Com ISDN TA (provided by http://www.3com.com/) (Communications Class, Abstract Control Model (AT commandset)) (see http://www.etla.net/~n_hibma/usb/usb.pl#UCDCDriver) Support for the Y-E data floppy disk drives (drive provided by http://www.yedata.co.jp/) (Mass Storage Class, UFI/CBI Subclass) (see http://www.etla.net/~n_hibma/usb/usb.pl#UMASSDriver) Support for the Imation Superdisk LS-120 drives (Mass Storage Class, 8070i/CBI (IDE/ATAPI ?) Subclass) (see http://www.etla.net/~n_hibma/usb/usb.pl#UMASSDriver) Support for 3.2-STABLE users. To be developed: Support for Digi 2/4/8 port serial adapter AcelePort (might be provided by Digi) (proprietary interface) Bulk transfers on OHCI controllers All the while: More work on UHCI and OHCI to make transfers and transfer cancelling more reliable usbdi.h interface needs to be looked at and made consistent Header file needs rearranging, but also the set of functions in usbdi.c is incomplete. Further away: Support for scanners derived from SCSI scanners (HP) Support for isochroneous transfers on USB bus (needed for audio and video support) Support for audio devices Support for video devices Support for joysticks, gamepads and the likes Cheers, Nick Hibma To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message From owner-freebsd-hardware Sat Jun 26 14:39:39 1999 Delivered-To: freebsd-hardware@freebsd.org Received: from frmug.org (frmug-gw.frmug.org [193.56.58.252]) by hub.freebsd.org (Postfix) with ESMTP id F1DC414FAE; Sat, 26 Jun 1999 14:39:32 -0700 (PDT) (envelope-from roberto@keltia.freenix.fr) Received: (from uucp@localhost) by frmug.org (8.9.1/frmug-2.3/nospam) with UUCP id XAA25058; Sat, 26 Jun 1999 23:39:27 +0200 (CEST) (envelope-from roberto@keltia.freenix.fr) Received: by keltia.freenix.fr (Postfix, from userid 101) id DFDEE8839; Sat, 26 Jun 1999 23:30:06 +0200 (CEST) (envelope-from roberto) Date: Sat, 26 Jun 1999 23:30:06 +0200 From: Ollivier Robert To: freebsd-scsi@FreeBSD.org, freebsd-hardware@FreeBSD.org Subject: Re: firewire support Message-ID: <19990626233006.A25315@keltia.freenix.fr> Mail-Followup-To: freebsd-scsi@FreeBSD.org, freebsd-hardware@FreeBSD.org References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii User-Agent: Mutt/0.95.5i In-Reply-To: ; from Nick Hibma on Sat, Jun 26, 1999 at 10:45:01AM +0200 X-Operating-System: FreeBSD 4.0-CURRENT/ELF ctm#5423 AMD-K6 MMX @ 200 MHz Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org According to Nick Hibma: > I've had a couple of e-mails from people wanting to work on it, but > never heard anything from them again (ca. half a year ago). We had a presentation about a BSD driver for Firewire at USENIX two weeks ago. The author is Katsushi Kobayashi . The OHCI version is not done yet according to the paper but he plans to do it. The driver is at -- Ollivier ROBERT -=- FreeBSD: The Power to Serve! -=- roberto@keltia.freenix.fr FreeBSD keltia.freenix.fr 4.0-CURRENT #71: Sun May 9 20:16:32 CEST 1999 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message