Date: Tue, 16 Mar 1999 10:10:30 +0100 From: Pascal Gienger <p@znet.de> To: freebsd-isdn@freebsd.org Subject: i4b: SyncPPP stopping ipcp without obvious reason... Message-ID: <19990316101030.A318@finesse.paul-magazin.de>
next in thread | raw e-mail | index | archive | help
With i4b, Version 00.71, I have the following problem: Often a connection is closed just after it is opened using a syncPPP- Device (isp0). Authentication is not the problem, logs show that phase network is reached. With isdntrace I can see that it is my computer that shuts down the connection. Here is the PPP log: Mar 16 09:52:47 finesse /kernel: isp0: phase establish Mar 16 09:52:50 finesse /kernel: isp0: Up event Mar 16 09:52:50 finesse /kernel: isp0: lcp up(starting) Mar 16 09:52:50 finesse /kernel: isp0: lcp output <conf-req id=0x14 len=10 05-06-4f-73-b7-c2> Mar 16 09:52:50 finesse /kernel: isp0: lcp input(req-sent): <conf-req id=0x1 len=17 01-04-05-f4-13-09-03-00-c0-7b-53-ea-3a> Mar 16 09:52:50 finesse /kernel: isp0: lcp parse opts: mru 0x13 [rej] send conf-rej Mar 16 09:52:50 finesse /kernel: isp0: lcp output <conf-rej id=0x1 len=13 13-09-03-00-c0-7b-53-ea-3a> Mar 16 09:52:50 finesse /kernel: isp0: lcp input(req-sent): <conf-ack id=0x14 len=10 05-06-4f-73-b7-c2> Mar 16 09:52:50 finesse /kernel: isp0: lcp input(ack-rcvd): <conf-req id=0x2 len=8 01-04-05-f4> Mar 16 09:52:50 finesse /kernel: isp0: lcp parse opts: mru Mar 16 09:52:50 finesse /kernel: isp0: lcp parse opt values: mru 1524 send conf-ack Mar 16 09:52:50 finesse /kernel: isp0: lcp output <conf-ack id=0x2 len=8 01-04-05-f4> Mar 16 09:52:50 finesse /kernel: isp0: lcp tlu Mar 16 09:52:51 finesse /kernel: isp0: phase network Mar 16 09:52:51 finesse /kernel: isp0: ipcp open(stopped) Mar 16 09:52:51 finesse /kernel: isp0: lcp close(opened) Mar 16 09:52:51 finesse /kernel: isp0: phase terminate Mar 16 09:52:51 finesse /kernel: isp0: lcp output <term-req id=0x15 len=4> Mar 16 09:52:51 finesse /kernel: isp0: invalid input protocol <addr=0xff ctrl=0x3 proto=0x80fd> Mar 16 09:52:51 finesse /kernel: isp0: lcp input(closing): <term-ack id=0x15 len=4> Mar 16 09:52:51 finesse /kernel: isp0: phase dead Mar 16 09:52:51 finesse /kernel: isp0: lcp down(closed) Mar 16 09:52:51 finesse /kernel: isp0: Down event (carrier loss) And the connection is down. Rebooting the system helps :( The log shows this then: Mar 16 10:05:21 finesse /kernel: isp0: phase establish Mar 16 10:05:24 finesse /kernel: isp0: Up event Mar 16 10:05:24 finesse /kernel: isp0: lcp up(starting) Mar 16 10:05:24 finesse /kernel: isp0: lcp output <conf-req id=0x1 len=10 05-06-5b-4c-dd-53> Mar 16 10:05:25 finesse /kernel: isp0: lcp input(req-sent): <conf-req id=0x1 len=17 01-04-05-f4-13-09-03-00-c0-7b-53-ea-3a> Mar 16 10:05:25 finesse /kernel: isp0: lcp parse opts: mru 0x13 [rej] send conf-rej Mar 16 10:05:25 finesse /kernel: isp0: lcp output <conf-rej id=0x1 len=13 13-09-03-00-c0-7b-53-ea-3a> Mar 16 10:05:25 finesse /kernel: isp0: lcp input(req-sent): <conf-ack id=0x1 len=10 05-06-5b-4c-dd-53> Mar 16 10:05:25 finesse /kernel: isp0: lcp input(ack-rcvd): <conf-req id=0x2 len=8 01-04-05-f4> Mar 16 10:05:25 finesse /kernel: isp0: lcp parse opts: mru Mar 16 10:05:25 finesse /kernel: isp0: lcp parse opt values: mru 1524 send conf-ack Mar 16 10:05:25 finesse /kernel: isp0: lcp output <conf-ack id=0x2 len=8 01-04-05-f4> Mar 16 10:05:25 finesse /kernel: isp0: lcp tlu Mar 16 10:05:25 finesse /kernel: isp0: phase network Mar 16 10:05:25 finesse /kernel: isp0: ipcp open(initial) Mar 16 10:05:25 finesse /kernel: isp0: ipcp up(starting) Mar 16 10:05:25 finesse /kernel: isp0: ipcp output <conf-req id=0x2 len=4> Mar 16 10:05:25 finesse /kernel: isp0: ipcp input(req-sent): <conf-req id=0x1 len=16 02-06-00-2d-0f-01-03-06-86-22-58-06> Mar 16 10:05:25 finesse /kernel: isp0: ipcp parse opts: compression [rej] address send conf-rej Mar 16 10:05:25 finesse /kernel: isp0: ipcp output <conf-rej id=0x1 len=10 02-06-00-2d-0f-01> Mar 16 10:05:25 finesse /kernel: isp0: lcp output <proto-rej id=0x3 len=15 80-fd-01-01-00-09-11-05-00-01-04> Mar 16 10:05:25 finesse /kernel: isp0: invalid input protocol <addr=0xff ctrl=0x3 proto=0x80fd> Mar 16 10:05:25 finesse /kernel: isp0: ipcp input(req-sent): <conf-ack id=0x2 len=4> Mar 16 10:05:26 finesse /kernel: isp0: ipcp input(ack-rcvd): <conf-req id=0x2 len=10 03-06-86-22-58-06> Mar 16 10:05:26 finesse /kernel: isp0: ipcp parse opts: address Mar 16 10:05:26 finesse /kernel: isp0: ipcp parse opt values: address 134.34.88.6 [ack] send conf-ack Mar 16 10:05:26 finesse /kernel: isp0: ipcp output <conf-ack id=0x2 len=10 03-06-86-22-58-06> Mar 16 10:05:26 finesse /kernel: And it works afterwards. Why does ipcp does not start in the first example? This does occur after some uptime of the system (10 hours or 15, ok not a really big uptime ;-) ) and then persists. isdnd just informs be about "outgoing call disconnected (local)". Where I put an error? :-) Pascal -- Unix, Pascal Gienger, Moosstr. 7 /\ 7 .rtssooM ,regneiG lacsaP xinU Networx 78467 Konstanz, p@znet.de / \ ed.tenz@p ,znatsnoK 76487 xrowteN & WWW http://pascal.znet.de/ \ed.tenz.lacsap\\:ptth WWW & http://echo.znet.de:8888/ echo \8888:ed.tenz.ohce\\:ptth -- Unix, Pascal Gienger, Moosstr. 7 /\ 7 .rtssooM ,regneiG lacsaP xinU Networx 78467 Konstanz, p@znet.de / \ ed.tenz@p ,znatsnoK 76487 xrowteN & WWW http://pascal.znet.de/ \ed.tenz.lacsap\\:ptth WWW & http://echo.znet.de:8888/ echo \8888:ed.tenz.ohce\\:ptth To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990316101030.A318>