Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 4 Nov 2001 23:37:59 +0100
From:      Jan.Stocker@t-online.de (Jan Stocker)
To:        <freebsd-hardware@freebsd.org>, <freebsd-scsi@freebsd.org>
Subject:   USB / DA / Minolta 2330 Zoom
Message-ID:  <000a01c16581$5ad9e320$fe02010a@twoflower.liebende.de>

next in thread | raw e-mail | index | archive | help
Hi,
i am trying to get my Minolta Dimage 2330 Zoom running under FreeBSD... But
it doesnt want to run. I am discussing this with Phillip Musumeci and here
are the infos i have for you:

Identification looks like this...


    umass0: MINOLTA  DIMAGE 2330 ZOOM DIMAGE2330ZOOM, rev 1.00/1.00, addr 2
    da0 at umass-sim0 bus 0 target 0 lun 0
    da0: <MINOLTA DIMAGE 2330 ZOOM 1.00> Removable Direct Access SCSI-0
device
    da0: 650KB/s transfers
    da0: 62MB (128001 512 byte sectors: 64H 32S/T 62C)



Information with fdisk da0:



******* Working on device /dev/da0 *******
parameters extracted from in-core disklabel are:
cylinders=62 heads=64 sectors/track=32 (2048 blks/cyl)

parameters to be used for BIOS calculations are:
cylinders=62 heads=64 sectors/track=32 (2048 blks/cyl)

fdisk: invalid fdisk partition table found
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
<UNUSED>
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
sysid 165,(FreeBSD/NetBSD/386BSD)
    start 32, size 126944 (61 Meg), flag 80 (active)
beg: cyl 0/ head 1/ sector 1;
end: cyl 61/ head 63/ sector 32



This is a digital camera with a compact flash card. So this card is used and
setup from Windows. So i may think it is a msdos fs, isnt it? So whats the
upper information says? 3 unused partition and one in UFS ???

A mount with ufs or msdos fs failed with a unconfigured device msg for all
slices and a mount for da0 with an invalid parameter error.

Any idea?

Jan


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000a01c16581$5ad9e320$fe02010a>