Date: Sun, 13 Oct 2002 00:42:26 -0700 (PDT) From: Alex Varju <alex@varju.ca> To: Steve Kargl <sgk@troutmask.apl.washington.edu> Cc: current@FreeBSD.ORG Subject: Re: panic during boot Message-ID: <20021013003957.B72731-100000@snapple.webct.com> In-Reply-To: <20021013005149.GA1220@troutmask.apl.washington.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, 12 Oct 2002, Steve Kargl wrote:
> On Sat, Oct 12, 2002 at 05:21:01PM -0700, Alex Varju wrote:
> > Hi there,
> >
> > For the last few days, I have been unable to build a bootable kernel. I
> > have gone back to GENERIC, and it still doesn't work. When I try to boot,
> > it panics almost immediately. Can anybody offer any suggestions for where
> > to start diagnosing this?
>
> Disable acpi. You can do this from the boot loader
> by doing
>
> set hint.acpi.0.disabled="1"
>
> I have an ASUS A7V-133 that simply will not use acpi.
Hi Steve,
Thanks for the suggestion. I also have an ASUS motherboard (CUSL2), so it
seems plausible that this could be a problem. Booting without acpi,
things get a bit further, then die. I get the following:
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #1: Sat Oct 12 16:16:49 PDT 2002
varju@alex.madd.tnmc.ca:/home/freebsd/obj/home/freebsd/src.HEAD/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0660000.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 804025134 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (804.03-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536784896 (524204K bytes)
avail memory = 514215936 (502164K bytes)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using $PIR table, 10 entries at 0xc00f1360
pcib0: <Intel 82815 (i815 GMCH) Host To Hub bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd800-0xd83f mem 0xf3800000-0xf38fffff,0xf4000000-0xf4000fff irq 9 at device 10.0 on pci2
fxp0: Ethernet address 00:d0:b7:be:13:f1
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Memory modified after free 0xc40c1000(32764)
panic: Most recently used by bus
Debugger("panic")
Stopped at Debugger+0x54: xchgl %ebx,in_Debugger.0
db> t
Debugger(c04b657b,c0563980,c04d06db,c0682a24,1) at Debugger+0x54
panic(c04d06db,c04b78b9,7ffc,c1e0ca00,c1564ae8) at panic+0xab
mtrash_ctor(c40c1000,8000,0,533,0) at mtrash_ctor+0x5d
uma_zalloc_arg(c1564a00,0,5,1000,c1564a00) at uma_zalloc_arg+0x147
malloc(4a7c,c05134c0,5,6,c1569670) at malloc+0x75
device_set_driver(c1580800,c04f1b68,c1569680,0,0) at device_set_driver+0xb0
device_probe_child(c1580a00,c1580800,c04e4540,c02455be,c157f680) at device_probe_child+0x91
device_probe_and_attach(c1580800,2,c0682b48,c0245744,c1580a00) at device_probe_and_attach+0x53
bus_generic_attach(c1580a00,2,58,c0682b38,c1580a00,2) at bus_generic_attach+0x28
pci_attach(c1580a00,c1580a00,c157f680,c049e108,2) at pci_attach+0xa4
device_probe_and_attach(c1580a00,c157f680,c0682ba0,c02472c6,c157f680) at device_probe_and_attach+0xb0
bus_generic_attach(c157f680,c049e108,2,c157f680,c0682bd0) at bus_generic_attach+0x28
pcib_attach(c157f680,c157f680,c04e4540,c02455be,c157fa00) at pcib_attach+0x46
device_probe_and_attach(c157f680,0,c0682c0c,c0245744,c157f980) at device_probe_and_attach+0xb0
bus_generic_attach(c157f980,0,58,c0682bfc,c157f980,0) at bus_generic_attach+0x28
pci_attach(c157f980,c3fea098,c04e4540,c04da0af,0) at pci_attach+0xa4
device_probe_and_attach(c157f980,c4084070,c0682c78,c0460e2d,c157fa00) at device_probe_and_attach+0xb0
bus_generic_attach(c157fa00,c04da0af,0,c0682c68,c157fa00) at bus_generic_attach+0x28
nexus_pcib_attach(c157fa00,c4098098,c04e4540,c1569ac0,c05300c0) at nexus_pcib_attach+0x8d
device_probe_and_attach(c157fa00,c157fb00,c0682cdc,c044fa1c,c157fb00) at device_probe_and_attach+0xb0
bus_generic_attach(c157fb00,0,c1569bf0,c408a400,c157fb00) at bus_generic_attach+0x28
legacy_attach(c157fb00,c4084098,c04e4540,c409d1e0,c1569b10) at legacy_attach+0x1c
device_probe_and_attach(c157fb00,c157fd80,c0682d2c,c04534cc,c157fd80) at device_probe_and_attach+0xb0
bus_generic_attach(c157fd80,c157fd80,c0682d5c,c02f02d0,c157fd80) at bus_generic_attach+0x28
nexus_attach(c157fd80,c407e098,c04e4540,c04d34d7,0) at nexus_attach+0x1c
device_probe_and_attach(c157fd80,c04dd664,c0682d80,c0445535,c1580000) at device_probe_and_attach+0xb0
root_bus_configure(c1580000,c04d34d7,0,c0682d98,c02b91a5) at root_bus_configure+0x28
configure(0,67f000,67fc00,67f000,0) at configure+0x35
mi_startup() at mi_startup+0xb5
begin() at begin+0x2c
db>
--
alex varju <varju@webct.com>
just a guy
webct canada
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021013003957.B72731-100000>