Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 19 May 2003 11:07:08 -0500
From:      Derek Young <bleach@orcacom.net>
To:        "Remington L." <madriax@garlic.com>
Cc:        freebsd-multimedia@freebsd.org
Subject:   Re: Weird as* sound problem
Message-ID:  <200305191107.08270.bleach@orcacom.net>
In-Reply-To: <200305172001.h4HK1ti109554@windmill-en0.garlic.com>
References:  <200305172001.h4HK1ti109554@windmill-en0.garlic.com>

next in thread | previous in thread | raw e-mail | index | archive | help
I have a sony viao GRX690 with the same sound card. I kind of have the same 
deal except I am tracking 4.8 STABLE. Sound only works for me when I have 
XServer running with DRM-DRI via my Ati Radeon graphics card running. 

I have absolutly no idea why this is so. But try getting Xserver running with 
drm and see if that helps.

Derek

On Saturday 17 May 2003 03:01 pm, Remington L. wrote:
> FreeBSD 5.0-RELEASE-p7
>
> I have a Sony VAIO GRX570 with a YAMAHA AC-XG Audio. My sound works on in
> XMMS playing mp3s, here is the catch, the sound dies the second I stop
> moving the mouse. How the helldoes that work and how do I fix it
>
>
> Copyright (c) 1992-2003 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights reserved.
> FreeBSD 5.0-RELEASE-p7 #0: Sat May 10 09:39:29 PDT 2003
>     root@:/usr/obj/usr/src/sys/laptop
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc06b6000.
> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06b60b4.
> Timecounter "i8254"  frequency 1193182 Hz
> Timecounter "TSC"  frequency 1590811848 Hz
> CPU: Pentium 4 (1590.81-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4
>
> Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMO
>V ,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
> real memory  = 536346624 (511 MB)
> avail memory = 513757184 (489 MB)
> Initializing GEOMetry subsystem
> Pentium Pro MTRR support enabled
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <SONY B0> on motherboard
> Using $PIR table, 7 entries at 0xc00fdf50
>     ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
>     ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31
>     ACPI-0351: *** Error: Could not install PciConfig handler for PCI0,
> AE_ALREADY_EXISTS
>     ACPI-0351: *** Error: Could not install PciConfig handler for PCI0,
> AE_ALREADY_EXISTS
>     ACPI-0351: *** Error: Could not install PciConfig handler for PCI0,
> AE_ALREADY_EXISTS
> Timecounter "ACPI-fast"  frequency 3579545 Hz
>     ACPI-0351: *** Error: Could not install PciConfig handler for PCI0,
> AE_ALREADY_EXISTS
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
> acpi_cpu0: <CPU> on acpi0
> acpi_tz0: <thermal zone> on acpi0
> acpi_lid0: <Control Method Lid Switch> on acpi0
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> agp0: <Intel 82845 host to AGP bridge> mem 0xec000000-0xefffffff at device
> 0.0 on pci0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pci1: <display, VGA> at device 0.0 (no driver attached)
> uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f
> irq 9 at device 29.0 on pci0
> usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev
> 1.10/3.00, addr 2, iclass 3/1
> ums0: 5 buttons and Z dir.
> uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f
> irq 9 at device 29.1 on pci0
> usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f
> at device 29.2 on pci0
> pcib0: possible interrupts:  9
> pcib0: slot 29 INTC routed to irq 9 via \\_SB_.LNKC
> usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> umass0: Sony USB Memory Stick Slot, rev 1.10/1.07, addr 2
> pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> pcic0: <Ricoh RL5C476 PCI-CardBus Bridge> irq 3 at device 5.0 on pci2
> pcic0: PCI Memory allocated: 0xe8200000
> pccard0: <PC Card 16-bit bus (classic)> on pcic0
> pcib2: possible interrupts:  9
> pcib2: slot 5 INTB routed to irq 9 via \\_SB_.LNKG
> pcic1: <Ricoh RL5C476 PCI-CardBus Bridge> irq 9 at device 5.1 on pci2
> pcic1: PCI Memory allocated: 0xe8201000
> pccard1: <PC Card 16-bit bus (classic)> on pcic1
> pci2: <serial bus, FireWire> at device 5.2 (no driver attached)
> fxp0: <Intel Pro/100 Ethernet> port 0x4000-0x403f mem 0xe8200000-0xe8200fff
> irq 9 at device 8.0 on pci2
> fxp0: Ethernet address 08:00:46:51:a4:b2
> inphy0: <i82562ET 10/100 media interface> on miibus0
> inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH3 ATA100 controller> port
> 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem
> 0xe8000000-0xe80003ff at device 31.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> pcm0: <Intel 82801CA (ICH3)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 9 at
> device 31.5 on pci0
> pci0: <simple comms> at device 31.6 (no driver attached)
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
> sio0 port 0x3f8-0x3ff irq 4 on acpi0
> sio0: type 16550A
> ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/15 bytes threshold
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> acpi_cmbat0: <Control method Battery> on acpi0
> acpi_cmbat1: <Control method Battery> on acpi0
> acpi_acad0: <AC adapter> on acpi0
> orm0: <Option ROMs> at iomem
> 0xdc000-0xdffff,0xd8000-0xdbfff,0xc0000-0xcffff on isa0
> pmtimer0 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounters tick every 10.000 msec
> acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
> ad0: 38154MB <HITACHI_DK23DA-40> [77520/16/63] at ata0-master UDMA100
> acd0: CD-RW <SONY CD-RW/DVD-ROM CRX810E> at ata1-master PIO4
>     ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
>     ACPI-1287: *** Error: Method execution failed, AE_ERROR
>     ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
>     ACPI-1287: *** Error: Method execution failed, AE_ERROR
>     ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
>     ACPI-1287: *** Error: Method execution failed, AE_ERROR
>     ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
>     ACPI-1287: *** Error: Method execution failed, AE_ERROR
>     ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
>     ACPI-1287: *** Error: Method execution failed, AE_ERROR
> (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0
> (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,0
> (probe0:umass-sim0:0:0:0): Power on, reset, or bus device reset occurred
> (probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
> (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0
> (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
> (probe0:umass-sim0:0:0:0): Medium not present
> (probe0:umass-sim0:0:0:0): Unretryable error
> Mounting root from ufs:/dev/ad0s2a
> Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
> Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
> Waiting (max 60 seconds) for system process `syncer' to stop...stopped
>
> syncing disks, buffers remaining...
> done
> Copyright (c) 1992-2003 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights reserved.
> FreeBSD 5.0-RELEASE-p7 #0: Sat May 10 09:39:29 PDT 2003
>     root@:/usr/obj/usr/src/sys/laptop
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc06b6000.
> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06b60a8.
> Timecounter "i8254"  frequency 1193182 Hz
> Timecounter "TSC"  frequency 1590816744 Hz
> CPU: Pentium 4 (1590.82-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4
>
> Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMO
>V ,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
> real memory  = 536346624 (511 MB)
> avail memory = 513757184 (489 MB)
> Initializing GEOMetry subsystem
> Pentium Pro MTRR support enabled
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <SONY B0> on motherboard
> Using $PIR table, 7 entries at 0xc00fdf50
>     ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
>     ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31
>     ACPI-0351: *** Error: Could not install PciConfig handler for PCI0,
> AE_ALREADY_EXISTS
>     ACPI-0351: *** Error: Could not install PciConfig handler for PCI0,
> AE_ALREADY_EXISTS
>     ACPI-0351: *** Error: Could not install PciConfig handler for PCI0,
> AE_ALREADY_EXISTS
> Timecounter "ACPI-fast"  frequency 3579545 Hz
>     ACPI-0351: *** Error: Could not install PciConfig handler for PCI0,
> AE_ALREADY_EXISTS
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
> acpi_cpu0: <CPU> on acpi0
> acpi_tz0: <thermal zone> on acpi0
> acpi_lid0: <Control Method Lid Switch> on acpi0
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> agp0: <Intel 82845 host to AGP bridge> mem 0xec000000-0xefffffff at device
> 0.0 on pci0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pci1: <display, VGA> at device 0.0 (no driver attached)
> uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f
> irq 9 at device 29.0 on pci0
> usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev
> 1.10/3.00, addr 2, iclass 3/1
> ums0: 5 buttons and Z dir.
> uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f
> irq 9 at device 29.1 on pci0
> usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f
> at device 29.2 on pci0
> pcib0: possible interrupts:  9
> pcib0: slot 29 INTC routed to irq 9 via \\_SB_.LNKC
> usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> umass0: Sony USB Memory Stick Slot, rev 1.10/1.07, addr 2
> pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> pcic0: <Ricoh RL5C476 PCI-CardBus Bridge> irq 3 at device 5.0 on pci2
> pcic0: PCI Memory allocated: 0xe8200000
> pccard0: <PC Card 16-bit bus (classic)> on pcic0
> pcib2: possible interrupts:  9
> pcib2: slot 5 INTB routed to irq 9 via \\_SB_.LNKG
> pcic1: <Ricoh RL5C476 PCI-CardBus Bridge> irq 9 at device 5.1 on pci2
> pcic1: PCI Memory allocated: 0xe8201000
> pccard1: <PC Card 16-bit bus (classic)> on pcic1
> pci2: <serial bus, FireWire> at device 5.2 (no driver attached)
> fxp0: <Intel Pro/100 Ethernet> port 0x4000-0x403f mem 0xe8200000-0xe8200fff
> irq 9 at device 8.0 on pci2
> fxp0: Ethernet address 08:00:46:51:a4:b2
> inphy0: <i82562ET 10/100 media interface> on miibus0
> inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH3 ATA100 controller> port
> 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem
> 0xe8000000-0xe80003ff at device 31.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> pcm0: <Intel 82801CA (ICH3)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 9 at
> device 31.5 on pci0
> pci0: <simple comms> at device 31.6 (no driver attached)
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
> sio0 port 0x3f8-0x3ff irq 4 on acpi0
> sio0: type 16550A
> ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/15 bytes threshold
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> acpi_cmbat0: <Control method Battery> on acpi0
> acpi_cmbat1: <Control method Battery> on acpi0
> acpi_acad0: <AC adapter> on acpi0
> orm0: <Option ROMs> at iomem
> 0xdc000-0xdffff,0xd8000-0xdbfff,0xc0000-0xcffff on isa0
> pmtimer0 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounters tick every 10.000 msec
> acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
> ad0: 38154MB <HITACHI_DK23DA-40> [77520/16/63] at ata0-master UDMA100
> acd0: CD-RW <SONY CD-RW/DVD-ROM CRX810E> at ata1-master PIO4
>     ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
>     ACPI-1287: *** Error: Method execution failed, AE_ERROR
>     ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
>     ACPI-1287: *** Error: Method execution failed, AE_ERROR
>     ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
>     ACPI-1287: *** Error: Method execution failed, AE_ERROR
>     ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
>     ACPI-1287: *** Error: Method execution failed, AE_ERROR
>     ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
>     ACPI-1287: *** Error: Method execution failed, AE_ERROR
> (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0
> (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
> (probe0:umass-sim0:0:0:0): Medium not present
> (probe0:umass-sim0:0:0:0): Unretryable error
> Mounting root from ufs:/dev/ad0s2a
> nfs server 172.16.64.1:/usr/src: not responding 10 > 9
> nfs server 172.16.64.1:/usr/src: is alive again
> nfs server 172.16.64.1:/usr/ports: not responding 10 > 9
> nfs server 172.16.64.1:/usr/ports: is alive again
> drm0: <ATI Radeon LW Mobility 7 (AGP)> port 0x3000-0x30ff mem
> 0xe8100000-0xe810ffff,0xf0000000-0xf7ffffff irq 9 at device 0.0 on pci1
> info: [drm] AGP at 0xec000000 64MB
> info: [drm] Initialized radeon 1.1.1 20010405 on minor 0
>     ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
>     ACPI-1287: *** Error: Method execution failed, AE_ERROR
> pcm0:play:0: play interrupt timeout, channel dead
> pcm0:play:0: play interrupt timeout, channel dead
> ums0: at uhub0 port 1 (addr 2) disconnected
> ums0: detached
> ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev
> 1.10/3.00, addr 2, iclass 3/1
> ums0: 5 buttons and Z dir.
> ums0: at uhub1 port 2 (addr 2) disconnected
> ums0: detached
> ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev
> 1.10/3.00, addr 2, iclass 3/1
> ums0: 5 buttons and Z dir.
>
>
> _______________________________________________
> freebsd-hardware@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
> To unsubscribe, send any mail to "freebsd-hardware-unsubscribe@freebsd.org"



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200305191107.08270.bleach>