Date: Sun, 26 Jun 2005 10:27:30 -0400 (EDT) From: "Mikhail T." <mi@celsius.virtual-estates.com> To: acpi@FreeBSD.org Subject: Trouble waking up from zzz Message-ID: <200506261427.j5QERUn4000723@celsius.virtual-estates.com>
next in thread | raw e-mail | index | archive | help
Hello!
I know have two laptops, which can not properly wake up from zzz.
I reported my Sony Vaio TR2/B last year, and was told, something
is wrong with its ACPI coding, which the vendor (Sony) obviously
never tested with anything but Windows (which uses "hybernation"
anyway).
Now, however, the I see the same issue with a much older PentiumII
based Fujitsu-Siemens machine (dmesg attached). When used with
4-stable a couple of years ago, there was no problem waking up from
zzz. Now -- with 5-stable -- the machine can not wake up properly.
When I press the power button to wake it up, it gets busy, but the
screen never lights up and there is no response on the network --
the same symptomps, I saw with Vaio (which never had 4-stable on
it).
My guess is, something it wrong with ACPI suspend/resume, whereas
APM-based would work fine. Is that reasonable and is there a
work-around? Any other suggestions?
Thanks!
-mi
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #0: Sun Dec 19 17:49:44 EST 2004
mi@celsius.virtual-estates.com:/home/obj/usr/src/sys/CELSIUS
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (400.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 536805376 (511 MB)
avail memory = 515624960 (491 MB)
acpi0: <PTLTD RSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1060-0x106f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1040-0x105f irq 11 at device 7.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pcm0: <ESS Solo-1 (unknown vendor)> port 0x1090-0x1093,0x1094-0x1097,0x1070-0x107f,0x1080-0x108f,0x1000-0x103f irq 11 at device 9.0 on pci0
pcm0: [GIANT-LOCKED]
cbb0: <TI1251B PCI-CardBus Bridge> irq 10 at device 20.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1251B PCI-CardBus Bridge> irq 10 at device 20.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <Generic IRDA-compatible device> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 400015867 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
cardbus0: Resource not specified in CIS: id=14, size=80
cardbus0: Resource not specified in CIS: id=18, size=80
xl0: <3Com 3c575B Fast Etherlink XL> port 0x1100-0x117f mem 0x88000000-0x8800007f,0x88000080-0x880000ff irq 10 at device 0.0 on cardbus0
miibus0: <MII bus> on xl0
tdkphy0: <TDK 78Q2120 media interface> on miibus0
tdkphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:10:4b:f8:30:0f
ad0: 9590MB <IBM-DCXA-210000/CX6OA82F> [19485/16/63] at ata0-master UDMA33
acd0: DVDROM <TOSHIBA DVD-ROM SD-C2102/1029> at ata0-slave PIO4
ata1-master: FAILURE - SETFEATURES SET TRANSFER MODE status=1<ERROR> error=4<ABORTED>
afd0: REMOVABLE <IOMEGA ZIP 100 ATAPI/47.N> at ata1-master BIOSPIO
Mounting root from ufs:/dev/ad0s2a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200506261427.j5QERUn4000723>