From owner-freebsd-multimedia@FreeBSD.ORG Mon Jun 27 11:01:52 2005 Return-Path: X-Original-To: freebsd-multimedia@freebsd.org Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9829016A41C for ; Mon, 27 Jun 2005 11:01:52 +0000 (GMT) (envelope-from owner-bugmaster@freebsd.org) Received: from freefall.freebsd.org (freefall.freebsd.org [216.136.204.21]) by mx1.FreeBSD.org (Postfix) with ESMTP id 59C9543D1F for ; Mon, 27 Jun 2005 11:01:52 +0000 (GMT) (envelope-from owner-bugmaster@freebsd.org) Received: from freefall.freebsd.org (peter@localhost [127.0.0.1]) by freefall.freebsd.org (8.13.3/8.13.3) with ESMTP id j5RB1qKA043079 for ; Mon, 27 Jun 2005 11:01:52 GMT (envelope-from owner-bugmaster@freebsd.org) Received: (from peter@localhost) by freefall.freebsd.org (8.13.3/8.13.1/Submit) id j5RB1pso043073 for freebsd-multimedia@freebsd.org; Mon, 27 Jun 2005 11:01:51 GMT (envelope-from owner-bugmaster@freebsd.org) Date: Mon, 27 Jun 2005 11:01:51 GMT Message-Id: <200506271101.j5RB1pso043073@freefall.freebsd.org> X-Authentication-Warning: freefall.freebsd.org: peter set sender to owner-bugmaster@freebsd.org using -f From: FreeBSD bugmaster To: freebsd-multimedia@FreeBSD.org Cc: Subject: Current problem reports assigned to you X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 27 Jun 2005 11:01:52 -0000 Current FreeBSD problem reports Critical problems Serious problems Non-critical problems S Submitted Tracker Resp. Description ------------------------------------------------------------------------------- o [2003/12/26] kern/60599 multimedia [sound] [partial patch] No sound for ATI 1 problem total. From owner-freebsd-multimedia@FreeBSD.ORG Mon Jun 27 22:50:06 2005 Return-Path: X-Original-To: freebsd-multimedia@freebsd.org Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E082416A433 for ; Mon, 27 Jun 2005 22:50:06 +0000 (GMT) (envelope-from jason@ec.rr.com) Received: from ms-smtp-03-eri0.southeast.rr.com (ms-smtp-03-lbl.southeast.rr.com [24.25.9.102]) by mx1.FreeBSD.org (Postfix) with ESMTP id 98FA443D58 for ; Mon, 27 Jun 2005 22:50:06 +0000 (GMT) (envelope-from jason@ec.rr.com) Received: from [192.168.1.101] (rrcs-24-172-31-78.midsouth.biz.rr.com [24.172.31.78]) by ms-smtp-03-eri0.southeast.rr.com (8.12.10/8.12.7) with ESMTP id j5RMnuY4002732; Mon, 27 Jun 2005 18:49:56 -0400 (EDT) Message-ID: <42C082EF.8010007@ec.rr.com> Date: Mon, 27 Jun 2005 18:51:27 -0400 From: jason henson User-Agent: Mozilla Thunderbird 1.0.2 (X11/20050426) X-Accept-Language: en-us, en MIME-Version: 1.0 To: "Conrad J. Sabatier" References: <20050619144617.46cbf5fc@dolphin.local.net> In-Reply-To: <20050619144617.46cbf5fc@dolphin.local.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Virus-Scanned: Symantec AntiVirus Scan Engine Cc: freebsd-multimedia@freebsd.org Subject: Re: Support for Soundblaster Live! 24-bit? X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 27 Jun 2005 22:50:07 -0000 Conrad J. Sabatier wrote: > I recently installed an evaluation copy of Windows XP Professional > Edition for x64 on one of my drives (mainly for the purpose of setting > up some MIDI apps, such as Cakewalk), and after checking out the current > list of available drivers for the various Soundblaster cards, found > that the basic Soundblaster Live! cards don't have a driver as of yet > (one is supposed to become available soon), but that the Soundblaster > Live! 24- bit (which does look like a rather nice card, in fact), does > already have a driver available. > > So, I'm wondering about the support for this card under FreeBSD. Is it > already supported, or will it be in the near future? I'd really like > to make sure that whatever new card I buy, it will work under both OSes. > > Thanks. > I remember ready on this list (maybe another) about the emu10k1 chip, or what creative calls their sound chips. There is support for the older first gen chip, and if it works on a newer one great. If not you are out of luck. No creative sponsored driver support. src/sys/dev/sound/pci/emu10k1.c /*- * Copyright (c) 2004 David O'Brien * Copyright (c) 2003 Orlando Bassotto * Copyright (c) 1999 Cameron Grant * All rights reserved. I also found Creative Audigy 2 (EMU10K2), Creative Audigy (EMU10K2), and Creative EMU10K1 mentioned. src/sys/dev/sound/pci/es137x.c /*- * Support the ENSONIQ AudioPCI board and Creative Labs SoundBlaster PCI * boards based on the ES1370, ES1371 and ES1373 chips. * * Copyright (c) 1999 Russell Cattelan * Copyright (c) 1999 Cameron Grant * Copyright (c) 1998 by Joachim Kuebart. All rights reserved. So I would recommend you get some chip ids or something of the like to check against the pci ids in the drivers. From owner-freebsd-multimedia@FreeBSD.ORG Mon Jun 27 22:54:14 2005 Return-Path: X-Original-To: freebsd-multimedia@freebsd.org Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2F23916A424 for ; Mon, 27 Jun 2005 22:54:14 +0000 (GMT) (envelope-from jason@ec.rr.com) Received: from ms-smtp-04-eri0.southeast.rr.com (ms-smtp-04-lbl.southeast.rr.com [24.25.9.103]) by mx1.FreeBSD.org (Postfix) with ESMTP id D014843D58 for ; Mon, 27 Jun 2005 22:54:13 +0000 (GMT) (envelope-from jason@ec.rr.com) Received: from [192.168.1.101] (rrcs-24-172-31-78.midsouth.biz.rr.com [24.172.31.78]) by ms-smtp-04-eri0.southeast.rr.com (8.12.10/8.12.7) with ESMTP id j5RMsAL4020604; Mon, 27 Jun 2005 18:54:10 -0400 (EDT) Message-ID: <42C083ED.9080609@ec.rr.com> Date: Mon, 27 Jun 2005 18:55:41 -0400 From: jason henson User-Agent: Mozilla Thunderbird 1.0.2 (X11/20050426) X-Accept-Language: en-us, en MIME-Version: 1.0 To: Tim Aslat References: <20050622141220.2cabee63@bofh.spyderweb.com.au> In-Reply-To: <20050622141220.2cabee63@bofh.spyderweb.com.au> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Virus-Scanned: Symantec AntiVirus Scan Engine Cc: freebsd-multimedia@freebsd.org Subject: Re: tamper proofing audio X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 27 Jun 2005 22:54:14 -0000 Tim Aslat wrote: > Hi All, > > can anyone tell me if it's possible to tamper-proof an audio recording > in such a way that it can still be played on a normal audio CD player? > > I'm not worried about the recording being copied, but I am worried > about it being modified and want to guard against it. Its for a voice > recorder project in a lawyers office where they want to be able to > prove conclusively that a certain audio recording was made on a > specific machine and hasn't been tampered with. I understand that it > is impossible to make anything completely tamper-proof, but I would > like to make it at least difficult for someone to do without some very > substantial resources and skills available to them. > > The recording unit is a standalone PC running FreeBSD 5.4-RELEASE, and > it would be nice not to have to change that. > > Please contact me off-list with details. > > Cheers > > Tim > > Put a unique id string or the like in the center of the disc when it is pressed or made that burners can not write to. You will have conclusive prove if the disc in question is a fake or authentic, unless the other guy has a cd press too. From owner-freebsd-multimedia@FreeBSD.ORG Tue Jun 28 10:42:18 2005 Return-Path: X-Original-To: freebsd-multimedia@freebsd.org Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4593E16A41F for ; Tue, 28 Jun 2005 10:42:18 +0000 (GMT) (envelope-from kaj@kth.se) Received: from mx3.kth.se (mx3.kth.se [130.237.48.97]) by mx1.FreeBSD.org (Postfix) with ESMTP id B931143D49 for ; Tue, 28 Jun 2005 10:42:17 +0000 (GMT) (envelope-from kaj@kth.se) Received: from localhost (localhost.localdomain [127.0.0.1]) by mx3.kth.se (Postfix) with ESMTP id D4C1814090E; Tue, 28 Jun 2005 12:42:15 +0200 (CEST) Received: from mx3.kth.se ([127.0.0.1]) by localhost (mx3.kth.se [127.0.0.1]) (amavisd-new, port 10024) with LMTP id 26752-01-67; Tue, 28 Jun 2005 12:42:14 +0200 (CEST) Received: from kashyyyk.ite.kth.se (kashyyyk.ite.kth.se [130.237.31.35]) by mx3.kth.se (Postfix) with ESMTP id 85C6914071F; Tue, 28 Jun 2005 12:42:14 +0200 (CEST) Received: from kashyyyk.ite.kth.se (localhost.localdomain [127.0.0.1]) by kashyyyk.ite.kth.se (8.13.1/8.13.1) with ESMTP id j5SAgEPW013945; Tue, 28 Jun 2005 12:42:14 +0200 Received: (from kaj@localhost) by kashyyyk.ite.kth.se (8.13.1/8.13.1/Submit) id j5SAgD9r013942; Tue, 28 Jun 2005 12:42:13 +0200 X-Authentication-Warning: kashyyyk.ite.kth.se: kaj set sender to kaj@kth.se using -f Sender: kaj@kashyyyk.ite.kth.se To: Tim Aslat References: <20050622141220.2cabee63@bofh.spyderweb.com.au> From: Rasmus Kaj Organization: http://www.stacken.kth.se/ - Stacken computer club, Stockholm X-Face: M9cR~WYav<"fu%MaslX0`43PAYY?uIsM8[#E(0\Xuy9rj>4gE\h3jm.7DD?]R8*^7T\o&vT U@[53Dwkuup4[0@gw#~kyu>`unH?kVj9CJa02(h>Ki\+i=%rn%sDf^KC.!?IHkKjMAbkd\jgmphp^' d|Q; OeXEAhq?ybGqOs1CHb6TJT42'C`Krnk61//AOfXtNjj/t'`5>Vw0QX!dKfOL$.f+S"LIuwR<; I Z0Qnnx(F^F]o@*V%TUtEV'1Z[TkOl^FFV9Z~A[b19%}uP*,huCU Date: 28 Jun 2005 12:42:13 +0200 In-Reply-To: <20050622141220.2cabee63@bofh.spyderweb.com.au> Message-ID: Lines: 35 User-Agent: Gnus/5.09 (Gnus v5.9.0) Emacs/21.3 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Virus-Scanned: by amavisd-new at kth.se Cc: freebsd-multimedia@freebsd.org Subject: Re: tamper proofing audio X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 28 Jun 2005 10:42:18 -0000 >>>>> "TA" == Tim Aslat writes: TA> Hi All, Hi! TA> can anyone tell me if it's possible to tamper-proof an audio recording TA> in such a way that it can still be played on a normal audio CD player? TA> I'm not worried about the recording being copied, but I am worried TA> about it being modified and want to guard against it. [...] Checksums and digital signatures comes to mind. Store the signed sound file in a filsystem on the cd, then it can be verified by anyone with access to the public key that the sound file is identic to what someone with access to the private key. A normal audio CD player won't be able to verify the authenticy of the recording, but it can still play the audio copy (there can be audio and data tracks on the same cd). If you need to store as much audio as possible, with the signature, on a single cd, you can stora a signed checksum of the audio track instead of a signed copy, then the data track can be much smaller. But in that case you need to create the checksum in such a way that the errors that do happen on an audio cd can be excused but still exclude the possiblilty of tampering. That might be a research area in its own right. It would no doubt be much simpler to store a signed copy of the audio (possibly compressed). The authenticy can then be established by first validating the signature and then listening to the signed audio file. -- Rasmus Kaj --+-- rasmus@kaj.se --+-- http://www.stacken.kth.se/~kaj/ Lottery: A tax on people who are bad at math From owner-freebsd-multimedia@FreeBSD.ORG Wed Jun 29 03:06:10 2005 Return-Path: X-Original-To: freebsd-multimedia@freebsd.org Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 60DA416A41C for ; Wed, 29 Jun 2005 03:06:10 +0000 (GMT) (envelope-from mus.bsd@gmail.com) Received: from wproxy.gmail.com (wproxy.gmail.com [64.233.184.196]) by mx1.FreeBSD.org (Postfix) with ESMTP id 21EC643D48 for ; Wed, 29 Jun 2005 03:06:09 +0000 (GMT) (envelope-from mus.bsd@gmail.com) Received: by wproxy.gmail.com with SMTP id i4so679468wra for ; Tue, 28 Jun 2005 20:06:09 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:reply-to:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; b=bNTuF+YpSMkJtRCKC0ogxvV12WCIHfyV/BSj5SQ23XMz0Cpzni8OTqxYRsq8JGanNExTu8dAOqv3sCJ0tHQMAV8vd69Lu6tFG+yfHZnFPs4zqd27kkTQ3SYULcsWvGWQgMcJBT2SHfweTTZ7sLdGVHn+M4l8atCWMplPLwfWXqE= Received: by 10.54.104.13 with SMTP id b13mr25544wrc; Tue, 28 Jun 2005 20:06:09 -0700 (PDT) Received: by 10.54.129.5 with HTTP; Tue, 28 Jun 2005 20:06:09 -0700 (PDT) Message-ID: <8eb2b81050628200659d338ab@mail.gmail.com> Date: Wed, 29 Jun 2005 11:06:09 +0800 From: Muzaffar Ariff To: freebsd-multimedia@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Subject: ESS Maestro3 no sound X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Muzaffar Ariff List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 29 Jun 2005 03:06:10 -0000 Hi,=20 I've been trying to configure my maestro3 on a dell latitude (C600) but can't seem to get it right. Here's what I've done: 1. Identified my sound card by loading the sound driver module: #kldload snd_driver 2. Cat /dev/sndstat to see what sound driver it is: FreeBSD Audio Driver (newpcm) Installed devices: pcm0: at io 0xd800 irq 5 kld snd_maestro3 =20 (4p/1r/0v channels duplex default) 3. So then I load the driver directly to /boot/loader.conf: snd_maestro3_load=3D"YES" 4. The I reboot the system and used xmms to play my mp3. It runs and can play the file but no sound! Pump up the volume but nothing happens. The weird thing is the sound works on Windows. I've search the startup messages /var/run/dmesg.boot and found the following: pci0: at device 7.3 (no driver attached) pcm0: port 0xd800-0xd8ff mem 0xf3ffe000-0xf3fffff= f irq 5 at device 8.0 on pci0 pcm0: failed: rid 0x10 is ioport, requested 3 pcm0: [GIANT-LOCKED] pcm0: Now could there be something wrong with the pci0 or the pcm0? Any pointers on how to fix this? --- Muzaffar Ariff mus.bsd@gmail.com From owner-freebsd-multimedia@FreeBSD.ORG Wed Jun 29 04:30:38 2005 Return-Path: X-Original-To: freebsd-multimedia@freebsd.org Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E66FB16A41F for ; Wed, 29 Jun 2005 04:30:38 +0000 (GMT) (envelope-from yongari@rndsoft.co.kr) Received: from rndsoft.co.kr (michelle.rndsoft.co.kr [211.32.202.209]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5AEBA43D5C for ; Wed, 29 Jun 2005 04:30:37 +0000 (GMT) (envelope-from yongari@rndsoft.co.kr) Received: by simscan 1.1.0 ppid: 66610, pid: 66611, t: 1.2538s scanners:none Received: from unknown (HELO michelle.rndsoft.co.kr) (192.168.5.90) by 0 with SMTP; 29 Jun 2005 04:25:09 +0900 Received: from michelle.rndsoft.co.kr (localhost.rndsoft.co.kr [127.0.0.1]) by michelle.rndsoft.co.kr (8.13.1/8.13.1) with ESMTP id j5T4USEY009513 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Wed, 29 Jun 2005 13:30:28 +0900 (KST) (envelope-from yongari@rndsoft.co.kr) Received: (from yongari@localhost) by michelle.rndsoft.co.kr (8.13.1/8.13.1/Submit) id j5T4URKU009512; Wed, 29 Jun 2005 13:30:27 +0900 (KST) (envelope-from yongari@rndsoft.co.kr) Date: Wed, 29 Jun 2005 13:30:27 +0900 From: Pyun YongHyeon To: Muzaffar Ariff Message-ID: <20050629043027.GB8832@rndsoft.co.kr> References: <8eb2b81050628200659d338ab@mail.gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <8eb2b81050628200659d338ab@mail.gmail.com> User-Agent: Mutt/1.4.2.1i X-Spam-Checker-Version: SpamDetector 1.00 (2004-01-11) on Cc: freebsd-multimedia@freebsd.org Subject: Re: ESS Maestro3 no sound X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: yongari@rndsoft.co.kr List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 29 Jun 2005 04:30:39 -0000 On Wed, Jun 29, 2005 at 11:06:09AM +0800, Muzaffar Ariff wrote: > Hi, > > I've been trying to configure my maestro3 on a dell latitude (C600) > but can't seem to get it right. Here's what I've done: > > 1. Identified my sound card by loading the sound driver module: > #kldload snd_driver > > 2. Cat /dev/sndstat to see what sound driver it is: > FreeBSD Audio Driver (newpcm) > Installed devices: > pcm0: at io 0xd800 irq 5 kld snd_maestro3 > (4p/1r/0v channels duplex default) > > 3. So then I load the driver directly to /boot/loader.conf: > snd_maestro3_load="YES" > > 4. The I reboot the system and used xmms to play my mp3. It runs and > can play the file but no sound! Pump up the volume but nothing > happens. The weird thing is the sound works on Windows. I've search > the startup messages /var/run/dmesg.boot and found the following: > > pci0: at device 7.3 (no driver attached) > pcm0: port 0xd800-0xd8ff mem 0xf3ffe000-0xf3ffffff irq > 5 at device 8.0 on pci0 > pcm0: failed: rid 0x10 is ioport, requested 3 > pcm0: [GIANT-LOCKED] > pcm0: > > Now could there be something wrong with the pci0 or the pcm0? Any > pointers on how to fix this? > While converting maestro3(4) to MPSAFE one I noticed the same thing. Unloading/reloading the driver fixed it. I guess there are cases that the hardware were not initialized correctly. But it was hard to reproduce it on my system and I just met just two times so far. Due to lack of publicly available documentaion from ESS it's also difficult to know what is the reason. :-( Btw, does the issue vanish away when you cold start your system? You may get better chance if the driver is linked into kernel. -- Regards, Pyun YongHyeon http://www.kr.freebsd.org/~yongari | yongari@freebsd.org From owner-freebsd-multimedia@FreeBSD.ORG Wed Jun 29 05:23:51 2005 Return-Path: X-Original-To: freebsd-multimedia@freebsd.org Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 21FB916A423 for ; Wed, 29 Jun 2005 05:23:51 +0000 (GMT) (envelope-from mus.bsd@gmail.com) Received: from wproxy.gmail.com (wproxy.gmail.com [64.233.184.204]) by mx1.FreeBSD.org (Postfix) with ESMTP id BB3C543D4C for ; Wed, 29 Jun 2005 05:23:50 +0000 (GMT) (envelope-from mus.bsd@gmail.com) Received: by wproxy.gmail.com with SMTP id i4so692037wra for ; Tue, 28 Jun 2005 22:23:49 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:reply-to:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=KdlKo59Lu830EP0wK7Ww7bsW4fTrxxR70Jtve/f7DrqLmMy0Qz7IunX3+6dqjJ+KoBy+ZyAxVqmI/WyjOlACN6tg9yxjkrdX6KYyIBiQrR47GigwinpeGBTbn5taYZYLw9dqNXrIZZVNCGkP3C2XS2k2/A+p9QGhPPA8MycDkCE= Received: by 10.54.45.1 with SMTP id s1mr38452wrs; Tue, 28 Jun 2005 22:23:47 -0700 (PDT) Received: by 10.54.129.5 with HTTP; Tue, 28 Jun 2005 22:23:47 -0700 (PDT) Message-ID: <8eb2b8105062822237f1e71bd@mail.gmail.com> Date: Wed, 29 Jun 2005 13:23:47 +0800 From: Muzaffar Ariff To: yongari@rndsoft.co.kr In-Reply-To: <20050629043027.GB8832@rndsoft.co.kr> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Content-Disposition: inline References: <8eb2b81050628200659d338ab@mail.gmail.com> <20050629043027.GB8832@rndsoft.co.kr> Cc: freebsd-multimedia@freebsd.org Subject: Re: ESS Maestro3 no sound X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Muzaffar Ariff List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 29 Jun 2005 05:23:51 -0000 Thanks for the quick reply and here what I've found out > Btw, does the issue vanish away when you cold start your system? No it doesn't go away. My system doesn't hang its just there's no sound.=20 > You may get better chance if the driver is linked into kernel. So basically I have to build myself a customize kernel? Never done that but i'll give it a shot. -m- On 6/29/05, Pyun YongHyeon wrote: > On Wed, Jun 29, 2005 at 11:06:09AM +0800, Muzaffar Ariff wrote: > > Hi, > > > > I've been trying to configure my maestro3 on a dell latitude (C600) > > but can't seem to get it right. Here's what I've done: > > > > 1. Identified my sound card by loading the sound driver module: > > #kldload snd_driver > > > > 2. Cat /dev/sndstat to see what sound driver it is: > > FreeBSD Audio Driver (newpcm) > > Installed devices: > > pcm0: at io 0xd800 irq 5 kld snd_maestro= 3 > > (4p/1r/0v channels duplex default) > > > > 3. So then I load the driver directly to /boot/loader.conf: > > snd_maestro3_load=3D"YES" > > > > 4. The I reboot the system and used xmms to play my mp3. It runs and > > can play the file but no sound! Pump up the volume but nothing > > happens. The weird thing is the sound works on Windows. I've search > > the startup messages /var/run/dmesg.boot and found the following: > > > > pci0: at device 7.3 (no driver attached) > > pcm0: port 0xd800-0xd8ff mem 0xf3ffe000-0xf3= ffffff irq > > 5 at device 8.0 on pci0 > > pcm0: failed: rid 0x10 is ioport, requested 3 > > pcm0: [GIANT-LOCKED] > > pcm0: > > > > Now could there be something wrong with the pci0 or the pcm0? Any > > pointers on how to fix this? > > >=20 > While converting maestro3(4) to MPSAFE one I noticed the same thing. > Unloading/reloading the driver fixed it. I guess there are cases that > the hardware were not initialized correctly. But it was hard to > reproduce it on my system and I just met just two times so far. > Due to lack of publicly available documentaion from ESS it's also > difficult to know what is the reason. :-( > Btw, does the issue vanish away when you cold start your system? >=20 > You may get better chance if the driver is linked into kernel. >=20 > -- > Regards, > Pyun YongHyeon > http://www.kr.freebsd.org/~yongari | yongari@freebsd.org >=20 --=20 Muzaffar Ariff mus.bsd@gmail.com From owner-freebsd-multimedia@FreeBSD.ORG Wed Jun 29 08:48:35 2005 Return-Path: X-Original-To: freebsd-multimedia@freebsd.org Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id DE0FC16A41C for ; Wed, 29 Jun 2005 08:48:35 +0000 (GMT) (envelope-from jhugo@icomtek.csir.co.za) Received: from marge.icomtek.csir.co.za (marge.icomtek.csir.co.za [146.64.28.1]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2FB4B43D48 for ; Wed, 29 Jun 2005 08:48:22 +0000 (GMT) (envelope-from jhugo@icomtek.csir.co.za) Received: from [3ffe:2900:fffa:3:211:43ff:feba:aff1] (unknown [IPv6:3ffe:2900:fffa:3:211:43ff:feba:aff1]) by marge.icomtek.csir.co.za (Postfix) with ESMTP id C5F918FC2C for ; Wed, 29 Jun 2005 10:48:06 +0200 (SAST) From: Johann Hugo To: freebsd-multimedia@freebsd.org Date: Wed, 29 Jun 2005 10:48:06 +0200 User-Agent: KMail/1.8 References: <20050625204148.GA1857@puff.jakemsr.gom> In-Reply-To: <20050625204148.GA1857@puff.jakemsr.gom> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200506291048.06408.jhugo@icomtek.csir.co.za> Subject: ffmpeg on 5.4-STABLE X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 29 Jun 2005 08:48:36 -0000 Hi I am trying to build ffmpeg from the ports directory on 5.4-STABLE, but it stops with the following error. ./libavcodec/libavcodec.so: undefined reference to `bone' ./libavcodec/libavcodec.so: undefined reference to `wm1010' ./libavcodec/libavcodec.so: undefined reference to `ff_pw_3' ./libavcodec/libavcodec.so: undefined reference to `ff_pw_20' ./libavcodec/libavcodec.so: undefined reference to `d40000' gmake: *** [ffmpeg_g] Error 1 *** Error code 2 Any pointers to make it work will be appreciated. Johann From owner-freebsd-multimedia@FreeBSD.ORG Wed Jun 29 15:07:55 2005 Return-Path: X-Original-To: freebsd-multimedia@freebsd.org Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7711D16A41C for ; Wed, 29 Jun 2005 15:07:55 +0000 (GMT) (envelope-from scottl@samsco.org) Received: from pooker.samsco.org (pooker.samsco.org [168.103.85.57]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2631C43D55 for ; Wed, 29 Jun 2005 15:07:54 +0000 (GMT) (envelope-from scottl@samsco.org) Received: from [192.168.254.11] (junior.samsco.home [192.168.254.11]) (authenticated bits=0) by pooker.samsco.org (8.13.3/8.13.3) with ESMTP id j5TFFYT7069160; Wed, 29 Jun 2005 09:15:35 -0600 (MDT) (envelope-from scottl@samsco.org) Message-ID: <42C2B94F.2010708@samsco.org> Date: Wed, 29 Jun 2005 09:07:59 -0600 From: Scott Long User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.7.8) Gecko/20050615 X-Accept-Language: en-us, en MIME-Version: 1.0 To: yongari@rndsoft.co.kr References: <8eb2b81050628200659d338ab@mail.gmail.com> <20050629043027.GB8832@rndsoft.co.kr> In-Reply-To: <20050629043027.GB8832@rndsoft.co.kr> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit X-Spam-Status: No, score=-2.8 required=3.8 tests=ALL_TRUSTED autolearn=failed version=3.0.2 X-Spam-Checker-Version: SpamAssassin 3.0.2 (2004-11-16) on pooker.samsco.org Cc: freebsd-multimedia@freebsd.org, Muzaffar Ariff Subject: Re: ESS Maestro3 no sound X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 29 Jun 2005 15:07:55 -0000 Pyun YongHyeon wrote: > On Wed, Jun 29, 2005 at 11:06:09AM +0800, Muzaffar Ariff wrote: > > Hi, > > > > I've been trying to configure my maestro3 on a dell latitude (C600) > > but can't seem to get it right. Here's what I've done: > > > > 1. Identified my sound card by loading the sound driver module: > > #kldload snd_driver > > > > 2. Cat /dev/sndstat to see what sound driver it is: > > FreeBSD Audio Driver (newpcm) > > Installed devices: > > pcm0: at io 0xd800 irq 5 kld snd_maestro3 > > (4p/1r/0v channels duplex default) > > > > 3. So then I load the driver directly to /boot/loader.conf: > > snd_maestro3_load="YES" > > > > 4. The I reboot the system and used xmms to play my mp3. It runs and > > can play the file but no sound! Pump up the volume but nothing > > happens. The weird thing is the sound works on Windows. I've search > > the startup messages /var/run/dmesg.boot and found the following: > > > > pci0: at device 7.3 (no driver attached) > > pcm0: port 0xd800-0xd8ff mem 0xf3ffe000-0xf3ffffff irq > > 5 at device 8.0 on pci0 > > pcm0: failed: rid 0x10 is ioport, requested 3 > > pcm0: [GIANT-LOCKED] > > pcm0: > > > > Now could there be something wrong with the pci0 or the pcm0? Any > > pointers on how to fix this? > > > > While converting maestro3(4) to MPSAFE one I noticed the same thing. > Unloading/reloading the driver fixed it. I guess there are cases that > the hardware were not initialized correctly. But it was hard to > reproduce it on my system and I just met just two times so far. > Due to lack of publicly available documentaion from ESS it's also > difficult to know what is the reason. :-( > Btw, does the issue vanish away when you cold start your system? > > You may get better chance if the driver is linked into kernel. > It looks like yet more decay in the driver. When I wrote it, I was lazy and didn't want to figure out which chip versions preferred IOPORT mapping and which ones preferred MEMIO, so I just had it try MEMIO first (since that is a better choice) and then fail back to IOPORT. The resource manager seemed to tolerate this back then, but apparently it doesn't now. My guess is that the first call to bus_alloc_resource returns success but actually fails, and in the process it leaks the resource out of the resource manager. Then when you unload and load again, the resource is unavailable (since it was leaked) so the first call to fails, prompting it to go to the second call which succeeds fully. This would mean that there are now a number of bugs in the resource manager which need to be fixed. Based on what I've seen over the years, it might be safe to assume that BAR0 on both the meastro3 and allegro1 is IOPORT and that BAR1 on the maestro3 is MEMIO. Thus, the easiest change might be to just remove the first bus_alloc_resource call and force the driver to always use IOPORT. I'd still like to use this as a test case for fixing the deeper bugs in the resource manager, though. Scott From owner-freebsd-multimedia@FreeBSD.ORG Fri Jul 1 02:32:54 2005 Return-Path: X-Original-To: freebsd-multimedia@freebsd.org Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 98EA516A41C for ; Fri, 1 Jul 2005 02:32:54 +0000 (GMT) (envelope-from pyunyh@gmail.com) Received: from wproxy.gmail.com (wproxy.gmail.com [64.233.184.203]) by mx1.FreeBSD.org (Postfix) with ESMTP id 45BA443D49 for ; Fri, 1 Jul 2005 02:32:54 +0000 (GMT) (envelope-from pyunyh@gmail.com) Received: by wproxy.gmail.com with SMTP id i25so213245wra for ; Thu, 30 Jun 2005 19:32:53 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:date:to:cc:subject:message-id:reply-to:references:mime-version:content-type:content-disposition:in-reply-to:user-agent:from; b=FlO/KzLFhjDgQ5WokSEz0WSxCq7pUDLV8KTCSGc01u4ajyNX+zKh52dS68LMMlQbZK5+Wudxo8eRoL1k5MYQhoo6Bwgm0OZ4UL4foJXGZxvTYnOZURFm9XeWANicXDBfHa2JiwFXFID2wKgQkikGd+BBtOeClnJp1kxKA7aqupk= Received: by 10.54.16.28 with SMTP id 28mr962051wrp; Thu, 30 Jun 2005 19:32:53 -0700 (PDT) Received: from michelle.rndsoft.co.kr ([211.32.202.209]) by mx.gmail.com with ESMTP id 65sm168894wra.2005.06.30.19.32.51; Thu, 30 Jun 2005 19:32:53 -0700 (PDT) Received: from michelle.rndsoft.co.kr (localhost.rndsoft.co.kr [127.0.0.1]) by michelle.rndsoft.co.kr (8.13.1/8.13.1) with ESMTP id j612X7Jp017986 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Fri, 1 Jul 2005 11:33:07 +0900 (KST) (envelope-from yongari@rndsoft.co.kr) Received: (from yongari@localhost) by michelle.rndsoft.co.kr (8.13.1/8.13.1/Submit) id j612X7f5017985; Fri, 1 Jul 2005 11:33:07 +0900 (KST) (envelope-from yongari@rndsoft.co.kr) Date: Fri, 1 Jul 2005 11:33:07 +0900 To: Scott Long Message-ID: <20050701023307.GF17609@rndsoft.co.kr> References: <8eb2b81050628200659d338ab@mail.gmail.com> <20050629043027.GB8832@rndsoft.co.kr> <42C2B94F.2010708@samsco.org> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="FL5UXtIhxfXey3p5" Content-Disposition: inline In-Reply-To: <42C2B94F.2010708@samsco.org> User-Agent: Mutt/1.4.2.1i From: Pyun YongHyeon Cc: freebsd-multimedia@freebsd.org, Muzaffar Ariff Subject: Re: ESS Maestro3 no sound X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: pyunyh@gmail.com List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 01 Jul 2005 02:32:54 -0000 --FL5UXtIhxfXey3p5 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Wed, Jun 29, 2005 at 09:07:59AM -0600, Scott Long wrote: [...] > > It looks like yet more decay in the driver. When I wrote it, I was lazy > and didn't want to figure out which chip versions preferred IOPORT > mapping and which ones preferred MEMIO, so I just had it try MEMIO first > (since that is a better choice) and then fail back to IOPORT. The > resource manager seemed to tolerate this back then, but apparently it > doesn't now. My guess is that the first call to bus_alloc_resource > returns success but actually fails, and in the process it leaks the > resource out of the resource manager. Then when you unload and load > again, the resource is unavailable (since it was leaked) so the first > call to fails, prompting it to go to the second call which succeeds > fully. This would mean that there are now a number of bugs in the > resource manager which need to be fixed. > > Based on what I've seen over the years, it might be safe to assume that > BAR0 on both the meastro3 and allegro1 is IOPORT and that BAR1 on the > maestro3 is MEMIO. Thus, the easiest change might be to just remove > the first bus_alloc_resource call and force the driver to always use > IOPORT. I'd still like to use this as a test case for fixing the deeper > bugs in the resource manager, though. > Thanks for detailed explanation. :-) Here is patch. Muzaffar, does the patch change your situation? Btw, I encountered dreasful message "play interrupt timeout, channel dead" again. Unloading the driver and then reloading the driver fixed it. Since I see "pci_link2: Unable to choose an IRQ" during driver load I can't sure it's fault of maestro3(4) driver. > Scott PS. Due to mail server issues I sent again. -- Regards, Pyun YongHyeon --FL5UXtIhxfXey3p5 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="maestro3.resource.diff" --- maestro3.c.orig Mon May 23 15:27:07 2005 +++ maestro3.c Thu Jun 30 14:55:02 2005 @@ -1203,19 +1203,21 @@ } } + pci_enable_busmaster(dev); data = pci_read_config(dev, PCIR_COMMAND, 2); - data |= (PCIM_CMD_PORTEN | PCIM_CMD_MEMEN | PCIM_CMD_BUSMASTEREN); + data |= (PCIM_CMD_PORTEN | PCIM_CMD_MEMEN); pci_write_config(dev, PCIR_COMMAND, data, 2); sc->regid = PCIR_BAR(0); - sc->regtype = SYS_RES_MEMORY; + data = pci_read_config(dev, PCIR_COMMAND, 2); + device_printf(dev,"PCIR_COMMAND = 0x%x\n", data); + sc->regtype = SYS_RES_IOPORT; + if ((data & PCIM_CMD_PORTEN) == 0) { + sc->regtype = SYS_RES_MEMORY; + device_printf(dev,"using memory mapped I/O\n"); + } sc->reg = bus_alloc_resource_any(dev, sc->regtype, &sc->regid, RF_ACTIVE); - if (!sc->reg) { - sc->regtype = SYS_RES_IOPORT; - sc->reg = bus_alloc_resource_any(dev, sc->regtype, &sc->regid, - RF_ACTIVE); - } if (!sc->reg) { device_printf(dev, "unable to allocate register space\n"); goto bad; --FL5UXtIhxfXey3p5-- From owner-freebsd-multimedia@FreeBSD.ORG Fri Jul 1 06:46:42 2005 Return-Path: X-Original-To: freebsd-multimedia@freebsd.org Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 59E1316A41C for ; Fri, 1 Jul 2005 06:46:42 +0000 (GMT) (envelope-from kairatsan@rambler.ru) Received: from mxb.rambler.ru (mxb.rambler.ru [81.19.66.30]) by mx1.FreeBSD.org (Postfix) with ESMTP id 141F743D1F for ; Fri, 1 Jul 2005 06:46:41 +0000 (GMT) (envelope-from kairatsan@rambler.ru) Received: from rambler.ru (mail5.rambler.ru [81.19.66.7]) by mxb.rambler.ru (Postfix) with ESMTP id 3917485261 for ; Fri, 1 Jul 2005 10:46:40 +0400 (MSD) Received: from [212.154.158.250] (account kairatsan@rambler.ru) by mail5.rambler.ru (CommuniGate Pro WebUser 4.2.10) with HTTP id 144283126 for freebsd-multimedia@freebsd.org; Fri, 01 Jul 2005 10:46:39 +0400 From: "sandykbaev kairat" To: freebsd-multimedia@freebsd.org X-Mailer: CommuniGate Pro WebUser Interface v.4.2.10 Date: Fri, 01 Jul 2005 10:46:39 +0400 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="windows-1251"; format="flowed" Content-Transfer-Encoding: 8bit Subject: sky star 2 X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 01 Jul 2005 06:46:42 -0000 Hello! How I can know is the adapter Digital Sat-TV (DVB) card, SkyStar 2, int, PCI is compatible with OS FreeBSD. With Best Regards, Kairat Sandykbayev. From owner-freebsd-multimedia@FreeBSD.ORG Fri Jul 1 07:13:34 2005 Return-Path: X-Original-To: freebsd-multimedia@freebsd.org Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id DEFDB16A41C for ; Fri, 1 Jul 2005 07:13:34 +0000 (GMT) (envelope-from arne_woerner@yahoo.com) Received: from web41210.mail.yahoo.com (web41210.mail.yahoo.com [66.218.93.43]) by mx1.FreeBSD.org (Postfix) with SMTP id AF3AB43D1D for ; Fri, 1 Jul 2005 07:13:34 +0000 (GMT) (envelope-from arne_woerner@yahoo.com) Received: (qmail 19947 invoked by uid 60001); 1 Jul 2005 07:13:33 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:Received:Date:From:Subject:To:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=20GoSXN3kdb0FBvPPpMQiwy85R5z2mm1upKn7pJXg0mYdD0xhC2+/ngVTaGQn/Qws2gROQ1SPEBQK8jxntVWwwCUfEOjJMMINGLUiBTvnsCS7eRf7MS58M/rtnh1dIVZ7sW0vO/9FTodhtRLjZfAMjbClJzzqmiiynqF7lrjVTM= ; Message-ID: <20050701071333.19945.qmail@web41210.mail.yahoo.com> Received: from [213.54.154.145] by web41210.mail.yahoo.com via HTTP; Fri, 01 Jul 2005 00:13:33 PDT Date: Fri, 1 Jul 2005 00:13:33 -0700 (PDT) From: Arne "Wörner" To: sandykbaev kairat , freebsd-multimedia@freebsd.org In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Cc: Subject: Re: sky star 2 X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 01 Jul 2005 07:13:35 -0000 --- sandykbaev kairat wrote: > Hello! How I can know is the adapter Digital Sat-TV (DVB) card, > SkyStar 2, int, PCI is compatible with OS FreeBSD. > Hiho! As far as I know, there is no support for DVB cards in FreeBSD... *sob* That is why, I use a little Linux box (set on top of a shoe box), that uses the air flow out of my big FreeBSD box for cooling... :-)) There is some support for a certain DVB PCI card, that can be used for bi-directional network traffic (http://www.freebsd.org/news/status/report-oct-2003-dec-2003.html#DVB-ASI-Support), but that is not what I needed, I think. I do not know, if it is easy to port the Linux DVB drivers to FreeBSD... I have heard, that somebody can use MS Windows Network Interface Card drivers inside the FreeBSD kernel... Maybe that idea might work for DVB cards, too? -Arne ____________________________________________________ Yahoo! Sports Rekindle the Rivalries. Sign up for Fantasy Football http://football.fantasysports.yahoo.com From owner-freebsd-multimedia@FreeBSD.ORG Fri Jul 1 14:48:13 2005 Return-Path: X-Original-To: freebsd-multimedia@freebsd.org Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5A06B16A41C for ; Fri, 1 Jul 2005 14:48:13 +0000 (GMT) (envelope-from mus.bsd@gmail.com) Received: from wproxy.gmail.com (wproxy.gmail.com [64.233.184.205]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1729B43D1D for ; Fri, 1 Jul 2005 14:48:12 +0000 (GMT) (envelope-from mus.bsd@gmail.com) Received: by wproxy.gmail.com with SMTP id i4so328089wra for ; Fri, 01 Jul 2005 07:48:12 -0700 (PDT) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:reply-to:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=cU9KzSvsGQRJbNXWMLbBexIFUm49cClkghm5yaE39PS9eb8hnzmgCgzU3qMoV+PPtGLk53bgLZ1Jahb1TVK7dzcPNfcFGYakN6JBFszUDOxyDXMmOHutOXbO8soy5AKg58en3oqvxZPqWL0QeEvV3gvLlDTRejDr/80NRaBtVRk= Received: by 10.54.45.7 with SMTP id s7mr1597668wrs; Fri, 01 Jul 2005 07:48:12 -0700 (PDT) Received: by 10.54.129.5 with HTTP; Fri, 1 Jul 2005 07:48:12 -0700 (PDT) Message-ID: <8eb2b81050701074853656129@mail.gmail.com> Date: Fri, 1 Jul 2005 22:48:12 +0800 From: Muzaffar Ariff To: pyunyh@gmail.com In-Reply-To: <20050701023307.GF17609@rndsoft.co.kr> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Content-Disposition: inline References: <8eb2b81050628200659d338ab@mail.gmail.com> <20050629043027.GB8832@rndsoft.co.kr> <42C2B94F.2010708@samsco.org> <20050701023307.GF17609@rndsoft.co.kr> Cc: freebsd-multimedia@freebsd.org Subject: Re: ESS Maestro3 no sound X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Muzaffar Ariff List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 01 Jul 2005 14:48:13 -0000 I'll give it a try first thing tomorrow. Had a busy week (hence no reply) :) I personally don't have a clue on how to load the patch but i think i can figure it out. I'll keep you guys posted next week. -m- On 7/1/05, Pyun YongHyeon wrote: > On Wed, Jun 29, 2005 at 09:07:59AM -0600, Scott Long wrote: >=20 > [...] >=20 > > > > It looks like yet more decay in the driver. When I wrote it, I was la= zy > > and didn't want to figure out which chip versions preferred IOPORT > > mapping and which ones preferred MEMIO, so I just had it try MEMIO fir= st > > (since that is a better choice) and then fail back to IOPORT. The > > resource manager seemed to tolerate this back then, but apparently it > > doesn't now. My guess is that the first call to bus_alloc_resource > > returns success but actually fails, and in the process it leaks the > > resource out of the resource manager. Then when you unload and load > > again, the resource is unavailable (since it was leaked) so the first > > call to fails, prompting it to go to the second call which succeeds > > fully. This would mean that there are now a number of bugs in the > > resource manager which need to be fixed. > > > > Based on what I've seen over the years, it might be safe to assume tha= t > > BAR0 on both the meastro3 and allegro1 is IOPORT and that BAR1 on the > > maestro3 is MEMIO. Thus, the easiest change might be to just remove > > the first bus_alloc_resource call and force the driver to always use > > IOPORT. I'd still like to use this as a test case for fixing the deep= er > > bugs in the resource manager, though. > > >=20 > Thanks for detailed explanation. :-) > Here is patch. Muzaffar, does the patch change your situation? >=20 > Btw, I encountered dreasful message "play interrupt timeout, channel dead= " > again. Unloading the driver and then reloading the driver fixed it. > Since I see "pci_link2: Unable to choose an IRQ" during driver load > I can't sure it's fault of maestro3(4) driver. >=20 > > Scott >=20 > PS. Due to mail server issues I sent again. > -- > Regards, > Pyun YongHyeon >=20 >=20 >=20 --=20 Muzaffar Ariff mus.bsd@gmail.com From owner-freebsd-multimedia@FreeBSD.ORG Sat Jul 2 00:01:26 2005 Return-Path: X-Original-To: freebsd-multimedia@freebsd.org Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4A3FA16A41C for ; Sat, 2 Jul 2005 00:01:26 +0000 (GMT) (envelope-from dmwassman@cox.net) Received: from lakermmtao11.cox.net (lakermmtao11.cox.net [68.230.240.28]) by mx1.FreeBSD.org (Postfix) with ESMTP id D4BA943D1D for ; Sat, 2 Jul 2005 00:01:25 +0000 (GMT) (envelope-from dmwassman@cox.net) Received: from jupiter.solar.net ([68.226.7.134]) by lakermmtao11.cox.net (InterMail vM.6.01.04.00 201-2131-118-20041027) with ESMTP id <20050702000125.XCOO28600.lakermmtao11.cox.net@jupiter.solar.net> for ; Fri, 1 Jul 2005 20:01:25 -0400 From: David Wassman To: freebsd-multimedia@freebsd.org Date: Fri, 1 Jul 2005 20:01:13 -0400 User-Agent: KMail/1.8 MIME-Version: 1.0 Content-Disposition: inline Message-Id: <200507012001.13843.dmwassman@cox.net> Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Subject: Simple video editing in FreeBSD 5.4 X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 02 Jul 2005 00:01:26 -0000 Hey all, I am hoping someone can give some advice. I am have recorded some TV shows and want to simply remove the commercials. Is there a simple video editing program that will do this? I record using a old machine (P2 400) and nuppelvideo then encode to mpeg using mencoder. I will do the editing on a P4 1.4ghz. I have tried kino (would not open the file) and mjpegtools glav (opens a multicolored screen). Any suggestions? David From owner-freebsd-multimedia@FreeBSD.ORG Sat Jul 2 03:23:30 2005 Return-Path: X-Original-To: freebsd-multimedia@freebsd.org Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5E52C16A41C for ; Sat, 2 Jul 2005 03:23:30 +0000 (GMT) (envelope-from jakemsr@jakemsr.com) Received: from mail231.csoft.net (resin.csoft.net [63.111.22.86]) by mx1.FreeBSD.org (Postfix) with SMTP id 01D1743D48 for ; Sat, 2 Jul 2005 03:23:29 +0000 (GMT) (envelope-from jakemsr@jakemsr.com) Received: (qmail 25401 invoked from network); 2 Jul 2005 03:23:28 -0000 Received: from unknown (HELO puff.jakemsr.gom) (63.111.27.87) by mail231.csoft.net with SMTP; 2 Jul 2005 03:23:28 -0000 Received: (from jakemsr@jakemsr.com) by puff.jakemsr.gom (mini_sendmail/1.3.5 16nov2003); Fri, 01 Jul 2005 20:23:28 PDT (sender jakemsr@puff.jakemsr.gom) Date: Fri, 1 Jul 2005 20:23:28 -0700 From: Jacob Meuser To: freebsd-multimedia@freebsd.org Message-ID: <20050702032328.GC18337@puff.jakemsr.gom> Mail-Followup-To: freebsd-multimedia@freebsd.org References: <200507012001.13843.dmwassman@cox.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <200507012001.13843.dmwassman@cox.net> User-Agent: Mutt/1.4.2i Subject: Re: Simple video editing in FreeBSD 5.4 X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 02 Jul 2005 03:23:30 -0000 On Fri, Jul 01, 2005 at 08:01:13PM -0400, David Wassman wrote: > Hey all, > > I am hoping someone can give some advice. I am have recorded some TV shows and > want to simply remove the commercials. Is there a simple video editing > program that will do this? I record using a old machine (P2 400) and > nuppelvideo then encode to mpeg using mencoder. after which step are you editing? presumably after the recording and before the encoding? > I will do the editing on a P4 > 1.4ghz. I have tried kino (would not open the file) and mjpegtools glav > (opens a multicolored screen). Any suggestions? glav is probably the simplest editor, but AFAIK, it only takes MJPEG files as the format. I'm not aware of any graphical video editor that takes nupplevideo as input, but that doesn't mean one doesn't exist. -- From owner-freebsd-multimedia@FreeBSD.ORG Sat Jul 2 05:09:56 2005 Return-Path: X-Original-To: freebsd-multimedia@freebsd.org Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1200116A41C for ; Sat, 2 Jul 2005 05:09:56 +0000 (GMT) (envelope-from mistry.7@osu.edu) Received: from crumpet.united-ware.com (ddsl-66-42-172-210.fuse.net [66.42.172.210]) by mx1.FreeBSD.org (Postfix) with ESMTP id B772243D1D for ; Sat, 2 Jul 2005 05:09:55 +0000 (GMT) (envelope-from mistry.7@osu.edu) Received: from [192.168.1.101] (ddsl-66-42-172-210.fuse.net [66.42.172.210]) (authenticated bits=0) by crumpet.united-ware.com (8.12.8p2/8.12.8) with ESMTP id j6258Lwj050249 (version=TLSv1/SSLv3 cipher=RC4-MD5 bits=128 verify=NO); Sat, 2 Jul 2005 01:08:21 -0400 (EDT) (envelope-from mistry.7@osu.edu) From: Anish Mistry To: freebsd-multimedia@freebsd.org Date: Sat, 2 Jul 2005 01:09:22 -0400 User-Agent: KMail/1.8 References: <200507012001.13843.dmwassman@cox.net> In-Reply-To: <200507012001.13843.dmwassman@cox.net> MIME-Version: 1.0 Content-Type: multipart/signed; boundary="nextPart2390219.lr3cY4W2bq"; protocol="application/pgp-signature"; micalg=pgp-sha1 Content-Transfer-Encoding: 7bit Message-Id: <200507020109.31308.mistry.7@osu.edu> X-Spam-Status: No, hits=0.0 required=5.0 tests=none autolearn=no version=2.64 X-Spam-Checker-Version: SpamAssassin 2.64 (2004-01-11) on crumpet.united-ware.com X-Virus-Scanned: ClamAV 0.86/963/Fri Jul 1 09:27:29 2005 on crumpet.united-ware.com X-Virus-Status: Clean Cc: David Wassman Subject: Re: Simple video editing in FreeBSD 5.4 X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 02 Jul 2005 05:09:56 -0000 --nextPart2390219.lr3cY4W2bq Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline On Friday 01 July 2005 08:01 pm, David Wassman wrote: > Hey all, > > I am hoping someone can give some advice. I am have recorded some > TV shows and want to simply remove the commercials. Is there a > simple video editing program that will do this? I record using a > old machine (P2 400) and nuppelvideo then encode to mpeg using > mencoder. I will do the editing on a P4 1.4ghz. I have tried kino > (would not open the file) and mjpegtools glav (opens a multicolored > screen). Any suggestions? > > David avidemux2 in the ports for editing. =2D-=20 Anish Mistry --nextPart2390219.lr3cY4W2bq Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (FreeBSD) iD8DBQBCxiGLxqA5ziudZT0RAmZSAKCq1LtjjxSdnbp8IIJHY8hJwy+WZQCeNqOG ycH6c64dKkbBVDN6dVsv11k= =OhbS -----END PGP SIGNATURE----- --nextPart2390219.lr3cY4W2bq-- From owner-freebsd-multimedia@FreeBSD.ORG Sat Jul 2 16:36:49 2005 Return-Path: X-Original-To: freebsd-multimedia@freebsd.org Delivered-To: freebsd-multimedia@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D966E16A41C for ; Sat, 2 Jul 2005 16:36:49 +0000 (GMT) (envelope-from ola.theander@otsystem.com) Received: from mail.otsystem.com (c213-89-1-74.cm-upc.chello.se [213.89.1.74]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1E77F43D1D for ; Sat, 2 Jul 2005 16:36:47 +0000 (GMT) (envelope-from ola.theander@otsystem.com) Received: (qmail 5024 invoked from network); 2 Jul 2005 18:38:08 +0200 Received: from c213-89-1-77.cm-upc.chello.se (HELO c0003) (213.89.1.77) by 0 (qmail 1.03 + ejcp) with SMTP; 2 Jul 2005 18:38:08 +0200 From: "Ola Theander" To: Date: Sat, 2 Jul 2005 18:36:44 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Office Outlook, Build 11.0.6353 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2527 Thread-Index: AcV/JBVDe2Nht42bQyqCDsH/vwrBcw== Message-Id: <20050702163647.1E77F43D1D@mx1.FreeBSD.org> Subject: Looking for Mini-ATX board with good video grabbing performance? X-BeenThere: freebsd-multimedia@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Multimedia discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 02 Jul 2005 16:36:50 -0000 Dear subscribers I'm currently working on a video recording device for one of my customers. The basic task is to have a fiber optic camera with a composite video output connected to the recording device which grabs and stores the output of the camera. My idea is to use a mini-ATX motherboard and a touch sensitive TFT-screen all wrapped up in a custom made boxing. So far I have used the Lex MV823A motherboard (http://www.lex.com.tw), equipped with a Philips SAA7113H, but I've got some indications that maybe the performance of this card, regarding it's video grabbing performance, isn't good enough. Therefore I hope that maybe I can get some suggestions of hardware with better performance. It's possible to consider a solution with a dedicated video grabbing card and a mini-ATX board without grabbing abilities assuming that it remains physically compact. The solution should be carried around so it should be as light and compact as possible. Another request is that the hardware should have god support in Linux or FreeBSD (or another free OS). Any help and suggestions would be greatly appreciated. Kind regards, Ola Theander